Search Results

Search found 11618 results on 465 pages for 'rescue mode'.

Page 11/465 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

  • cannot mount root filesystem on 10.04

    - by howaryoo
    I tried to apply the recommendation of question: Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) After running that command: sudo mount --bind /dev /mnt/dev I get this error message: mount: mount point /mnt/dev does not exist fdisk -l returns /dev/sda1 /dev/sda2 /dev/sda5 do I need to mount sda2 and sda5? Edited after @psusi's comment: /dev/sda1 is the boot file system It seems that I need to mount sda2 or sda5. Here is what I tried: (I tried this on a virtual machine so the sda(s) are now vda(s) ) ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/vda: 19.3 GB, 19327352832 bytes 16 heads, 63 sectors/track, 37449 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0008eece Device Boot Start End Blocks Id System /dev/vda1 * 3 496 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/vda2 498 37448 18622465 5 Extended Partition 2 does not end on cylinder boundary. /dev/vda5 498 37448 18622464 8e Linux LVM ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo mount -t ext4 /dev/vda5 /mnt mount: wrong fs type, bad option, bad superblock on /dev/vda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ sudo mount -t ext2 /dev/vda5 /mnt mount: wrong fs type, bad option, bad superblock on /dev/vda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ Any info that can help me rescue that server would be greatly appreciated!

    Read the article

  • Second Monitor stays black/in power save mode

    - by Rob
    I'm using two Monitors, a Belinea o.display 1 (Recognized as a Rogen Tech Distribution Inc 20" by Ubuntu, but working fine) on the DVI-Output (connected via DVI-to-VGA-adapter) as my primary Monitor and a Dell 19" (Recognized correctly) on the HDMI-output (via HDMI-to-DVI adapter) as secondary monitor. The graphics controller is a GeForce 9500 GS. I'm running a fully updated Ubuntu 13.04 with nouveau 1:1.0.7-0ubuntu1. The problem is that the second monitor (Dell) never seems to come out of standby during boot: the screen stays black and the status led on the monitor stays orange (it's green when it's on). It is correctly recognized an the size of the desktop is set accordingly, it just stays black. Changing any setting via xrandr/arandr/etc. does nothing. The on-screen-menu of the monitor reports it to be in power save mode. When using the proprietary NVIDIA-Drivers, the second monitor works just find. But these drivers cause a lot of other problems on my system, so i would really like to avoid them. On Ubuntu 12.10 i had found a workaround: When moving the relative position of the second monitor slightly down and the up again, it would turn on and function normally: xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x88 --rotate normal sleep 2 xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x0 --rotate normal This workaround stop working after the update to 13.04, and now i'm looking for a new solution. Has anyone experienced something similarity? xrandr output: Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192 DVI-I-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 433mm x 270mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1024x768 75.1 72.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 HDMI-1 connected 1280x1024+1680+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 lshw -c video: *-display Beschreibung: VGA compatible controller Produkt: G96 [GeForce 9500 GS] Hersteller: NVIDIA Corporation Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Version: a1 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom Konfiguration: driver=nouveau latency=0 Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:df00(Größe=128) memory:fb000000-fb07ffff Thanks for your help!

    Read the article

  • Reboot to fail safe mode when root file system is full

    - by Richard
    I have a system running on a 4GB Nandrive. When the drive is full, Ubuntu will not boot :( and I have to plug in a rescue thumbdrive to delete files. The problem is the hardware is not easily accessible except via network. Is there a sure-fire way to boot Ubuntu, say, to RAM or other means when the disk is full or on any other errors in the normal boot process? In other words, is there a fallback rescue boot mode with networking? Thanks for any advice.

    Read the article

  • ATI Radeon HD7000 Series (Laptop) - Switch Mode Between ATI & Intel Integrated GPU. Stuck on Boot Screen On Intel GPU Selection Mode

    - by Monkey Drone
    Laptop Specs: HP Pavilion G6-2020SE GPUs 1) ATI HD7000 Series 2) Intel Integrated OS Installed: x) Ubuntu 12.04 (64 bit) i) ATI Graphics Card Drivers Installed From AMD website. Note: Graphics Card Drivers are Working Fine in 3D Mode. It runs a little Hot as it should since its a GPU. Observation) AMD Catalyst Control Centre Lets me Choose If I want to run the system in HIGH-END (ATI GPU) OR Intel Integrated (Better battery life) While I am on High End GPU Choice, Ubuntu works fine. Problem) But when I switch to Intel Mode in the AMD CCC and reboot the Machine. Ubuntu goes into 'Low Graphics Mode'. The problem is not that it goes into low graphics mode, it is completely expected since I am no longer using the ATI GPU but the integrated Intel GPU. Problem starts with the 'Selection' of the options. During that screen, I have no mouse on the screen (even tried plugging in an external USB mouse) & No Keyboard functionality. Thus I am left completely disabled to choose any option and load into Ubuntu. The Only thing I can do is switch to a terminal and enable ATI GPU through command-line and Ubuntu works Fine again. Is it a bug that there is no mouse/keyboard available to me during the startup of Ubuntu when its launched in Low-Graphics Mode? Any suggestions on how to pass through that? My palms are sweating as I write this down because the ATI GPU is really heating up my laptop. I dont want to boot into Windows or keep it around any longer than necessary. Please advise with help and directions. Sincerely, MonkeyD Edit1: The Answer by Celso has helped me switch to Intel, thus giving me sufficient battery power. Kudos to Celso. Now I can at least use my laptop for the time being without having it burn hair off my skin. I am still looking for answer to my original question of, 'why is lightdm not working properly when I switch to Intel GPU using ATI HD7000 series official drivers provided by AMD'.

    Read the article

  • `var = something rescue nil` behaviour

    - by JP
    In ruby you can throw a rescue at the end of an assignment to catch any errors that might come up. I have a function (below: a_function_that_may_fail) where it's convenient to let it throw an error if certain conditions aren't met. The following code works well post = {} # Other Hash stuff post['Caption'] = a_function_that_may_fail rescue nil However I'd like to have post['Caption'] not even set if the function fails. I know I can do: begin post['Caption'] = a_function_that_may_fail recsue end but that feels a little excessive - is there a simpler solution?

    Read the article

  • alternative to rescue in ruby ?

    - by wefwgeweg
    it seems like i have begin rescue end statements everywhere in my code. this doesn't seem like the correct thing to do. i am learning process, can anyone suggest how can i catch any exceptions without having to place everything inside begin,rescue, end. anyway to just tell ruby to shut up and just keep going even if exception is raised ?

    Read the article

  • Is there any *good* HTML-mode for emacs?

    - by Carson Myers
    I love emacs, and I want to do my web-programming work in it, but I can't find a way to get it to edit HTML properly. I mean it's seriously awful. It will do HTML fine, but not PHP, javascript, etc. I tried getting html-helper-mode... I downloaded it, put it in /usr/local/share/emacs/site-lisp, and added it to my .emacs file: (autoload 'html-helper-mode "html-helper-mode" "Yay HTML" t) (setq auto-mode-alist (cons '("\\.html$" . html-helper-mode) auto-mode-alist)) copied and pasted from some site (I don't know elisp). it just, doesn't highlight anything at all. I tried downloading a whole bunch of modes and using some other mode to string them together, to no avail. Emacs is so great in every other way--why can't it do the simple task of editing web pages? I mean, it's a pretty standard thing to do for editors these days. So, does anyone know how to do this?

    Read the article

  • Unknown filesystem Grub rescue error

    - by Dewish Salik
    I have a lenovo z570, and i installed ubuntu 12.04 alongside with my windows 7. Recently all my games ive been playing, stop responding due to a AppCrash. I searched it on google and they said it had something to do with ubuntu. So i deleted the partition. After restarting my laptop i get the: unknown filesystem grub rescue error. I tried using a windows cd to boot, but it cant. Please HELP!! If you got something please comment or send to [email protected] Thanx in advance

    Read the article

  • I shrunk the Windows partition, now it says grub rescue on boot

    - by user1009013
    I have got a machine with dual-boot Windows 7 and Ubuntu 11.10, and I wanted to add another OS to that (Jolicloud), so I started the partition manager in Windows and shrunk the Windows partition by about 10 GB (so now I have:Windows;currently empty 10GB;Ubuntu). I shutted down the computer because I was finished. Now when I started my machine again it says error:no such partition. grub rescue> and I can type commands. ls gives (hd0) (hd0,msdos5) (hd0,msdos4) (hd0,msdos2) (hd0,msdos1) (fd0) if that helps

    Read the article

  • Specify next boot to be into safe mode/WinRE via commandline?

    - by TMRW
    As the title says.I would like a script that tells windows that the next boot should be into safe mode or atleast that the "F8" menu should be presented next boot.Booting into WinRE(Launch startup repair...) is problably even more un-doable.I looked over bcdedit options but did'nt see anything like this.I know msconfig has an option for safe boot but it's gui only. Currently if i wan't to boot into safe mode or launch WinRE then i have to forcefully restart my pc first for those options to be presented during boot(F8 does not bring up the safe mode option under normal conditions). Im using Windows 7 x64.

    Read the article

  • Why doesn't disabling IE's 'Protected Mode' enable the dragging-and-dropping of addresses from the IE address bar into Notepad

    - by dumbledad
    IE's Protected Mode prevents one dragging the address from the IE address bar into other applications (for example Notepad). There's an informative article on MSDN about Allowing Drag and Drop Operations in your Application. If I uncheck Enable Protected Mode in IE's settings and restart IE I still cannot drag the address from the IE address bar into other Notepad. Why doesn't disabling IE's 'Protected Mode' enable the dragging-and-dropping of addresses from the IE address bar into Notepad? Is there a way to make that work without adding a registry entry for Notepad (following the instructions in the article I mentioned)? (N.B. This is actually part of me trying to work out how to get this address drag-and-drop working in Processing.)

    Read the article

  • Seamless Mode Not Working Correctly in Virtual Box

    - by Jeremy
    I run Ubuntu Desktop in a VirtualBox seamless mode, hosted on Windows 7. I recently upgraded from 11.10 to 12.04 and seamless mode no longer works correctly. I have re-installed guest extensions. The problem is that the Ubuntu desktop wallpaper is shown, effectively blocking the Windows desktop. I can bring Windows apps to the foreground, but as soon as I bring any Ubuntu window to the foreground, all the windows apps will disappear, hidden by the ubuntu desktop even if I activated an Ubuntu window in a different monitor. So, it is not very much different from full-screen mode at this time. I suspect if I could turn off the Ubuntu desktop or wallpaper this would be a sufficient workaround (this is basically what Seamless mode is) but that does not seem to be possible within Ubuntu itself. [Jeremy doesn't specify system config, but I can confirm I'm seeing this behavior in Win 7 64-bit with both 32-bit and 64-bit guests. Giovanni sees the same thing on his laptop running Vista Ultimate 64 bit after upgrading his 32-bit guest to 12.04 (forums.virtualbox.org p225407, requires logging in with your free Oracle account). I was using vbox 4.1.14r77440 and matching Guest Additions. I upgraded to 4.1.16-78094 vbox+additions. Still a problem. And I filed launchpad bug 999929 to see if I can get feedback from developers. – tbc0] Any other ideas?

    Read the article

  • Read-only filesystem Recovery Mode not working

    - by purbleguy
    I have seen other posts of this before, but they didn't help. In short, today I was trying to play Colobot on my Ubuntu Trusty computer, when I tried to access the directory the game was in by terminal, bash warned me that the disk was in a read-only state. I'm like, ok... So I reboot and go into recovery mode, there I do fsck, it finds errors, but apparently fails to fix them. At that point I was getting annoyed and searched the internet, once I found an answer I ran the grub and dpkg options in recovery mode, recovery mode said it was read/write, but when I boot in, I get the same thing, read-only. So I reboot into recovery mode, and tada! It's read-only again. I can't think of anything else to do, as the other people who had the same problems had them fixed by the steps I did. I got all my important files backed up to both a seperate partition and a seperate computer, so no worries there. I just need help getting this to work, as my computer might as well be a brick if I cant do f/a on it

    Read the article

  • Ubuntu 11.10 not starting in Graphical mode?

    - by iammilind
    I am in deep trouble. I am using Ubuntu 11.10 in dual boot mode with XP. Originally my touch pad was not working, (sometimes). To fix that, I installed something. After reboot my Ubuntu is not booting up!! I have several software pkgs already installed in past several weeks so reinstall of OS is my last resort. Can someone help me to get it rebooted in graphical mode? I had followed the procedure mentioned in this thread as well. With that link, somehow I am able to restart in text mode. But no luck after that. I am not being able to go back on graphical mode. The important outputs of lspci are following: 00.00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.0 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) I am attaching few snapshots, for more details on hardware.

    Read the article

  • Rescue system running TFS that BSODs, into vmware esxi

    - by 3molo
    Hi, After moving to new facilities, one of our old Dell servers running Windows Server 2003 R2 on PowerEdge 2650 HW BSODs with 0x8e. The server runs Team Foundation Server, so we have a few guys dependent on it. No one here knows TFS, so we have no idea how difficult it would be to setup from scratch. We have the MSSQL database(s) backed up, recent and fresh copy. Tried removing/refitting memory modules, but with no success. The system boots into safe mode but hangs occasionally. I booted a linux livecd and did a dd of both c: and d:, so I have all the data in compressed images on a vmware machine. For the guest, I created a 38G (actually it became 40GB) partition to act as C:, and booted a live cd. I then uncompressed the compressed disk image of c: and dd'd it to the new c: using 'gunzip -dc c.img.gz | dd of=/dev/sda1 bs=1M'. The operation ran for about 1000 seconds, and completed successfully. I assumed it would at least try to boot windows (but most likely BSOD due to not having correct drivers), but the Vmware ESXi guest does not seem to recognize it as a bootable disk. We don't have the vmware enterprise license, so the vmware converter cold cloning is not an option. Did I do something wrong in my dd's etc with the ISOs, or why would it not (try to) boot? Am I wasting my time? What other approach is there? Will continue to try to remove services and drivers to make the physical machine at least work reasonably well in safe mode. What do you suggest? 1. Continue to get the dd'd images to the virtual disk and get it to boot. 2. Install a new windows server, get team foundation server and restore from backup. 3. Focus on the old problematic hardware Any help appreciated

    Read the article

  • Booting the liveCD/USB in efi mode fails on tablet xe700t1a

    - by F.L.
    My tablet is Samsung Series 7 Slate (xe700t1a-a02fr). It operates an intel sandy bridge architecture. The main issue about this tablet is that it ships with a windows 7 install in (U)EFI mode (GPT partition table, etc.), so I'd like to get an EFI dual boot with Ubuntu. But it seems I can't boot on the liveCD in EFI mode. It starts loading (up to initrd), but I then get a blank (black) screen. I've tried the nomodeset kernel option (as well as removing quiet and splash) with no luck. I have used the 12.04.1 desktop iso (I have read somewhere that it is the only one that can boot in EFI mode). What are the other leads I can follow ? thanks

    Read the article

  • Dlink DWA-556 Access point fails to start on 2.6.35-25 while 2.6.35-24 works. How can I do this with >2.6.35-24?

    - by Azendale
    I'm using hostapd to run an access point with a Dlink DWA-556 wireless N card. However, I can no longer get it to start when I use kernels greater than 2.6.35-24. Here's a log where I ran the uname -a&&hostapd -c <configfile> on the different kernel versions. Linux erikbandersen 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 GNU/Linux Configuration file: hostapd.conf ctrl_interface_group=0 Opening raw packet socket for ifindex 248 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf nl80211: Added 802.11b mode based on 802.11g information HT40: control channel: 2 secondary channel: 6 RATE[0] rate=10 flags=0x2 RATE[1] rate=20 flags=0x6 RATE[2] rate=55 flags=0x6 RATE[3] rate=110 flags=0x6 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Passive scanning not supported Mode: IEEE 802.11g Channel: 2 Frequency: 2417 MHz Flushing old station entries Deauthenticate all stations Using interface wlan1 with hwaddr 1c:bd:b9:d5:e8:3c and ssid 'erikbandersen.com/freewifi' wlan1: Setup of interface done. MGMT (TX callback) ACK Malformed netlink message: len=436 left=256 plen=420 256 extra bytes in the end of netlink message MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb mgmt::auth authentication: STA=3c:4a:92:0e:41:2f auth_alg=0 auth_transaction=1 status_code=0 wep=0 New STA wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: authentication OK (open system) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-AUTHENTICATE.indication(3c:4a:92:0e:41:2f, OPEN_SYSTEM) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) authentication reply: STA=3c:4a:92:0e:41:2f auth_alg=0 auth_transaction=2 resp=0 (IE len=0) MGMT (TX callback) ACK mgmt::auth cb wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: authenticated mgmt::assoc_req association request: STA=3c:4a:92:0e:41:2f capab_info=0x421 listen_interval=10 Validating WMM IE: OUI 00:50:f2 OUI type 2 OUI sub-type 0 version 1 QoS info 0x0 HT: STA 3c:4a:92:0e:41:2f HT Capabilities Info: 0x102c handle_assoc STA 3c:4a:92:0e:41:2f - no greenfield, num of non-gf stations 1 handle_assoc STA 3c:4a:92:0e:41:2f - 20 MHz HT, num of 20MHz HT STAs 1 hostapd_ht_operation_update current operation mode=0x0 hostapd_ht_operation_update new operation mode=0x7 changes=2 new AID 1 wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: association OK (aid 1) MGMT (TX callback) ACK mgmt::assoc_resp cb wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: associated (aid 1) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-ASSOCIATE.indication(3c:4a:92:0e:41:2f) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) wlan1: STA 3c:4a:92:0e:41:2f RADIUS: starting accounting session 4DAC8224-00000000 MGMT (TX callback) ACK mgmt::action cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb Signal 2 received - terminating wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DEAUTHENTICATE.indication(3c:4a:92:0e:41:2f, 1) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) Removing station 3c:4a:92:0e:41:2f hostapd_ht_operation_update current operation mode=0x7 hostapd_ht_operation_update new operation mode=0x0 changes=2 Flushing old station entries Deauthenticate all stations . Linux erikbandersen 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 x86_64 GNU/Linux Configuration file: hostapd.conf ctrl_interface_group=0 Opening raw packet socket for ifindex 248 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf nl80211: Added 802.11b mode based on 802.11g information Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=27 dBm HT40: control channel: 2 secondary channel: 6 RATE[0] rate=10 flags=0x2 RATE[1] rate=20 flags=0x6 RATE[2] rate=55 flags=0x6 RATE[3] rate=110 flags=0x6 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Passive scanning not supported Mode: IEEE 802.11g Channel: 2 Frequency: 2417 MHz Could not set channel for kernel driver wlan1: Unable to setup interface. My wireless card is listed as 02:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) by lspci. Am I doing it wrong and there's a new way of doing it? I'm holding off upgrading to Natty because of this. What changed between the versions that would cause this? Should I report it as a bug?

    Read the article

  • How to Make Steam’s Offline Mode Work

    - by Chris Hoffman
    Steam’s offline mode is notoriously problematic. To ensure it will work properly, you should perform a series of steps while online. If you don’t, Steam is supposed to prompt you for offline mode – but this doesn’t always work properly. If Steam’s offline mode isn’t working at all, you may still be in luck – some Steam games don’t use Steam’s DRM at all and can be launched manually. How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

    Read the article

  • Not getting GUI mode on ubuntu 12.04 desktop edition after installation on vmware workstation 7

    - by Salil Naik
    I installed Ubuntu 12.04 desktop edition on my PC using VMWare workstation 7. I assigned 1GB RAM and 20 GB Hard disk to Ubuntu. While starting Ubuntu virtual machine, It is not starting up with GUI mode. In is prompting me my Login ID in textual mode always. After waiting for long time as well the GUI mode is not appearing. I tried running sudo apt-get install updates sudo apt-get install xinit sudo apt-get install ubuntu-desktop Honestly, i don't know the meaning of all these.I am very new to ubuntu.Please help me here what to do? Below is my Laptop configuration OS: Genuine Windows 7 Home Basic(64 bit) RAM: 3 GB Processor: Intel core i3 Regards Salil

    Read the article

  • Google Chrome would not exist fullscreen mode

    - by siberan
    I am running 64-bit Ubuntu 13.10, have latest stable google-chrome version 30.0.1599.114-1. Whenever I enter fullscreen mode by pressing F11, it would never exit this mode by pressing F11. Actually, I see it exit but then fullscreen mode is quickly restored. I searched for a solution, but nothing really helps. I even tried completely re-installing it with no luck. Any suggestions? Update: I tried completely removing ~/.config/google-chrome, it did not help. Update 2: I am running Cinnamon 2.0.6, maybe that would give some clues. Thanks, Nick.

    Read the article

  • Bare-metal mode for Ubuntu

    - by user1071136
    I'm interested to benchmark a console-mode application, and would like to reduce to a minimum any interferences from other processes in the system. Is there an easy way to boot into Ubuntu 12.04 in a "bare-metal" mode ? I'm still interested in casually booting a "desktop" version of Ubuntu (so will prefer to avoid permanent changes), and would like to avoid installing a separate Ubuntu-server version. My use-case is the following - Application is single-thread and console-mode only. Test-box has 12GB of memory. I ssh into the test-box. Seems I can skip at least Unity, X-server and their dependents.

    Read the article

  • System unable to boot in normal mode..! need to select recovery mode and than Generic Mode to boot.?

    - by Haresh Veera
    I am using Ubuntu Server 12.04 LTS KDE Mode. Couple of Days back I updated the system using Muon Package manager. After Updating, now when ever I boot the system, It get stuck at starting bluetooth Daemon Ok / Stopping Bluetooth Daemon Fail.and after long wait its get start to GUI Mode, but with no mouse detection. So need to reboot by pressing CTL+ALT+DEL and when I select recovery mode - Boot in Generic -- It boot perfectly. How can I set the same as default, and remove the error boot loader script. I am no expert to linux or Kernel.

    Read the article

  • Unable to turn on seamless mode in VirtualBox

    - by user11658
    I'm not able to switch to Seamless Mode in VirtualBox with Ubuntu 10.04 or 9.10 as guest OS's. I have tried the seamless mode with XP as guest OS, and it works absolutely fine. The host OS is Windows 7. I have in-built Via/S3G Unichrome Pro IGP graphics, and I have allocated 30 MB out of 64 MB of graphics memory. I've also 1.5 GB of RAM. I also tried installing Guest Additions but it still didn't work. VirtualBox version is 4.0.4r70112. How can I get the seamless mode to work? Please help!

    Read the article

  • VMWare Unity Mode with Ubunty 12.10

    - by Nick
    This is a very difficult thing to search for, and find an answer to because of the unfortunate choice VMWare and Ubuntu both having something called "Unity". My host operating system is Windows 7 - 64 bit, running VMWare Workstation 9.0.1. I have a virtual machine running Ubuntu 12.10 - 64 bit. When I attempt to put VMWare in "Unity mode", I get the following message: The virtual machine cannot enter Unity mode because: - Unity is not supported on the guest operating system. From the VMWare site, there is nothing listed that says that Ubuntu is not supported for this... and I have installed the latest vmware-tools on the guest operating system. It seems like a lot of people have had this issue, but I haven't seen a good resolution to it yet. Does anyone know how to get Unity mode working with Ubuntu?

    Read the article

  • Move "XP Mode" from Windows Virtual PC to VirtualBox?

    - by JoelFan
    I installed "XP Mode" in Windows 7 (which uses Windows Virtual PC to host XP). I have now discovered that VirtualBox, which I have installed on the same Windows 7 machine, refuses to run at the same time as Windows Virtual PC (it gives me an error about not running multiple visualization programs). Is there any way I can convert the "XP Mode" image so that it will run inside VirtualBox instead of Windows Virtual PC? That way I will be able to run XP as well as other VM's at the same time.

    Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >