Search Results

Search found 17187 results on 688 pages for 'vpn connection'.

Page 11/688 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• Just how slow should my VPN be?

  - by David Heggie

  I have a VPN setup between a remote office with 2 ADSL connections (8Mb downstream, 512Kb upstream) and a main office with a 10Mb EFM connection (10Mb both up and down). The VPN is an IPSec connection using a DrayTek 2930 router for the ADSL and a DrayTek 3200 router at the EFM end. However, I'm unable to get speeds over this connection (tested with iperf) of anything over 600Kb or so down from the main office (traffic will pretty much always be from the main office to the remote office) Whilst I realise that there is an overhead and I'm never going to get the "full" bandwidth available over this VPN, I'd like to think that there's something I should be looking at that may help improve it. I've tried using the DrayTek's built-in "VPN Trunking" features which are supposed to load-balance connections, but this doesn't seem to improve matters much. I guess my question is - is this the kind of performance I should expect from this kind of setup and I'll just have to live with it, or should I be able to squeeze something more out of it through some VPN magic?

  Read the article

• Setup IPv6 over IPv4 tunnel in VPN

  - by bfmeb

  Let me explain my szenario: I have a linux server A. A is reachable in a VPN. So if I am connected to the VPN over Internet I can successfully ping A. Server A is connected to a Router B. Router B has a local ipv6 address and there are resources (each of them with a local ipv6 address) connected to Router B. After I am connected to VPN, I am able to use ssh to have access over A. Now I can use the ping6 command to ping the Router B or one of its connected resources. This works fine. The ping fails if I try to ping router B on my computer. Overview: My Computer -- VPN -- Server A(ipv4) -- Router B(ipv6) -- Ressource A(ipv6) On resource A runs for example a HTTP-Server. My question is: How can I access Resource A (for example with HTTP) on my to VPN connected computer? Is it possible? Should I setup a tunnel device? Sorry for this inexpertly explanation, but I am new to network stuff!

  Read the article

• VPN Configuration

  - by Josh

  How can I allow incoming connections on a Windows 7 machine that is connected to VPN? I have some services listening on certain ports that I have forwarded from my router. When the VPN is disconnected, I can connect to these services from my internal network as well as from the Internet without issue. When I connect my VPN however, I am still able to access the ports from my internal network, but not remotely. I think I need a split tunnel setup, and there is an option in the VPN settings to Use Default Gateway on remote network. I want this option enabled so all my traffic is routed through the VPN, but I want incoming connections to be allowed on my internal network IP from the Internet. Is there some hybrid way to set this up with routing?

  Read the article

• VPN (PPTP) in Virtual Machine (WinXP in VM Workstation 8 )

  - by user1059617

  i am trying to establish a VPN Connection in my GuestOS. But i get a timeout every Time. The Host : Win 7 The Guest: WinXp Software: VM-Workstation 8 The GuestOS is bridged to the Host network and has his own IP. The normal Connection in the GuestOS works fine but when i try to establish the VPN (no Programm used , just simple Windows VPN) i get an timeout? But i can establish the VPN from the Host without any problems... Any Ideas here? Thanks Ps:(If it matters: The VPN is PPTP from StrongVPN)

  Read the article

• php connection pooling mysql

  - by coool

  Hi, I am planning to use MYSQL. Is there a connection pooling extension available. or what is the normal practice for connection. is this the one used in every where... mysqli_connect("localhost", "xxx", "xxx", "test"); Do people use just normal msql_connect or pconnect..? how better is pconnect and what setting should I do for PConnect.... THnks

  Read the article

• What happens when you close an Entity Framework connection

  - by Shiraz Bhaiji

  We are using Entity Framework 1.0. In some cases we need to explicitly open connections, and then need to explicitly close connections. See http://msdn.microsoft.com/en-us/library/bb738582.aspx My question is, when we call "close" does the connection actually get closed, or is it just returned to the connection pool?

  Read the article

• L2TP connection fails!

  - by a.toraby

  I've installed l2tp-ipsec-vpn but when I try to connect to the vpn server I get error 500. Here are the logs: Jun 17 12:54:37.449 ipsec_setup: Stopping Openswan IPsec... Jun 17 12:54:38.858 Stopping xl2tpd: xl2tpd. Jun 17 12:54:38.859 xl2tpd[1511]: death_handler: Fatal signal 15 received Jun 17 12:54:38.872 ipsec_setup: Starting Openswan IPsec U2.6.37/K3.2.0-23-generic... Jun 17 12:54:39.027 ipsec__plutorun: Starting Pluto subsystem... Jun 17 12:54:39.033 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Jun 17 12:54:39.037 recvref[30]: Protocol not available Jun 17 12:54:39.038 xl2tpd[2442]: This binary does not support kernel L2TP. Jun 17 12:54:39.038 xl2tpd[2444]: xl2tpd version xl2tpd-1.3.1 started on atp-ThinkPad-SL410 PID:2444 Jun 17 12:54:39.038 xl2tpd[2444]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. Jun 17 12:54:39.038 xl2tpd[2444]: Forked by Scott Balmos and David Stipp, (C) 2001 Jun 17 12:54:39.038 xl2tpd[2444]: Inherited by Jeff McAdams, (C) 2002 Jun 17 12:54:39.039 xl2tpd[2444]: Forked again by Xelerance (www.xelerance.com) (C) 2006 Jun 17 12:54:39.039 xl2tpd[2444]: Listening on IP address 0.0.0.0, port 1701 Jun 17 12:54:39.040 Starting xl2tpd: xl2tpd. Jun 17 12:54:39.062 ipsec__plutorun: 002 added connection description "L2TP" Jun 17 12:55:30.753 104 "L2TP" #1: STATE_MAIN_I1: initiate Jun 17 12:55:30.754 010 "L2TP" #1: STATE_MAIN_I1: retransmission; will wait 20s for response Jun 17 12:55:30.754 010 "L2TP" #1: STATE_MAIN_I1: retransmission; will wait 40s for response Jun 17 12:55:30.754 003 "L2TP" #1: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000008] Jun 17 12:55:30.754 003 "L2TP" #1: received Vendor ID payload [RFC 3947] method set to=109 Jun 17 12:55:30.754 003 "L2TP" #1: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 109 Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [FRAGMENTATION] Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [MS-Negotiation Discovery Capable] Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [IKE CGA version 1] Jun 17 12:55:30.755 106 "L2TP" #1: STATE_MAIN_I2: sent MI2, expecting MR2 Jun 17 12:55:30.755 010 "L2TP" #1: STATE_MAIN_I2: retransmission; will wait 20s for response Jun 17 12:55:30.755 003 "L2TP" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed Jun 17 12:55:30.755 108 "L2TP" #1: STATE_MAIN_I3: sent MI3, expecting MR3 Jun 17 12:55:30.756 004 "L2TP" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024} Jun 17 12:55:30.756 117 "L2TP" #2: STATE_QUICK_I1: initiate Jun 17 12:55:30.756 010 "L2TP" #2: STATE_QUICK_I1: retransmission; will wait 20s for response Jun 17 12:55:30.756 003 "L2TP" #2: ignoring informational payload, type IPSEC_RESPONDER_LIFETIME msgid=6b03ff69 Jun 17 12:55:30.756 003 "L2TP" #2: NAT-Traversal: received 2 NAT-OA. ignored because peer is not NATed Jun 17 12:55:30.756 003 "L2TP" #2: our client subnet returned doesn't match my proposal - us:192.168.1.3/32 vs them:109.162.174.235/32 Jun 17 12:55:30.757 003 "L2TP" #2: Allowing questionable proposal anyway [ALLOW_MICROSOFT_BAD_PROPOSAL] Jun 17 12:55:30.757 004 "L2TP" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP=>0x23af21f8 <0xdb4a87b6 xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=none DPD=none} Jun 17 12:55:31.759 xl2tpd[2444]: Connecting to host x.x.x.x, port 1701 Jun 17 12:55:32.021 xl2tpd[2444]: Connection established to x.x.x.x, 1701. Local: 4720, Remote: 200 (ref=0/0). Jun 17 12:55:32.023 xl2tpd[2444]: Calling on tunnel 4720 Jun 17 12:55:32.454 xl2tpd[2444]: Call established with x.x.x.x, Local: 9667, Remote: 3, Serial: 1 (ref=0/0) Jun 17 12:55:32.456 xl2tpd[2444]: start_pppd: I'm running: Jun 17 12:55:32.456 xl2tpd[2444]: "/usr/sbin/pppd" Jun 17 12:55:32.457 xl2tpd[2444]: "passive" Jun 17 12:55:32.458 xl2tpd[2444]: "nodetach" Jun 17 12:55:32.458 xl2tpd[2444]: ":" Jun 17 12:55:32.459 xl2tpd[2444]: "file" Jun 17 12:55:32.459 xl2tpd[2444]: "/etc/ppp/L2TP.options.xl2tpd" Jun 17 12:55:32.460 xl2tpd[2444]: "ipparam" Jun 17 12:55:32.461 xl2tpd[2444]: "x.x.x.x" Jun 17 12:55:32.462 xl2tpd[2444]: "/dev/pts/1" Jun 17 12:55:32.583 pppd[2711]: Plugin passprompt.so loaded. Jun 17 12:55:32.583 pppd[2711]: pppd 2.4.5 started by root, uid 0 Jun 17 12:55:32.619 pppd[2711]: Using interface ppp0 Jun 17 12:55:32.620 pppd[2711]: Connect: ppp0 <--> /dev/pts/1 Jun 17 12:55:33.693 pppd[2711]: /usr/bin/L2tpIPsecVpn exited with code 0 Jun 17 12:55:34.454 [ERROR 404] Authentication failed: closing connection to 'L2TP' Jun 17 12:55:34.456 pppd[2711]: MS-CHAP authentication failed: E=691 Authentication failure Jun 17 12:55:34.457 pppd[2711]: CHAP authentication failed Jun 17 12:55:34.461 Stopping xl2tpd: xl2tpd. Jun 17 12:55:34.462 xl2tpd[2444]: death_handler: Fatal signal 15 received Jun 17 12:55:34.463 pppd[2711]: Modem hangup Jun 17 12:55:34.463 pppd[2711]: Connection terminated. Jun 17 12:55:34.474 ipsec_setup: Stopping Openswan IPsec... Jun 17 12:55:34.482 pppd[2711]: Exit. Jun 17 12:55:35.587 ipsec_setup: ERROR: Module xfrm4_mode_transport is in use Jun 17 12:55:35.665 ipsec_setup: ERROR: Module esp4 is in use I had this problem by ubuntu 11.10 though I can easily connect to the server from windows. I use ubuntu 12.0 64bit

  Read the article

• Network connection fails when downloading data

  - by Guus

  In the past few weeks, I've noticed my network connection becoming unstable while downloading files. I'm not sure how to diagnose this issue. I've found that my network connections appear to be temporarily unresponsive (for periods up to a minute or so) while I'm downloading a file (that's large enough to not be downloaded instantly). The problem occurs when downloading data through a webbrowser, but also when using SCP to download data from a remote location. During the period in which network connections are unresponsive, every resource that I try to access over the network is unavailable. This includes: The download itself (SCP reports a 'stalled' download) Web pages (won't load - browsers report 'resource unavailable') SSH sessions (CLI freezes) VPN connections (connections terminate) IM client connections (client starts reconnection attempts) ... (everything is pretty much dead) I've noticed that during such a period, I cannot even access the (web-based) administrative console of the router on my LAN at home (although it remains reachable for other devices). The problem occurs when connected to my home network, but also when I'm in the office. Other devices than my laptop are not affected. Given the above two characteristics I assume the problem cause lies within my laptop, not the network infrastructure. I'm running Ubuntu 11.10. Apart from applying automatic updates from Ubuntu, I can't think of a change that I applied to the OS that could have started the problems. I'm absolutely positive that this issue did not occur up to a few weeks ago (as it's very noticeable, and only started to annoy me in the last few days). When the problem occurs, applications that make use of a network connection fail visibly (I get popups telling me that a VPN connection is broken, for instance). The network manager does not report any issues related to my wifi-connection though. Help?

  Read the article

• Fortigate Remote VPN : no matching gateway for new request

  - by Kedare

  I am trying to configure a Fortigate 60C to act as an IPSec endpoint for remote VPN. I configured it like this : SCR-F0-FGT100C-1 # diagnose vpn ike config vd: root/0 name: SCR-REMOTEVPN serial: 7 version: 1 type: dynamic mode: aggressive dpd: enable retry-count 3 interval 5000ms auth: psk dhgrp: 2 xauth: server-auto xauth-group: VPN-group interface: wan1 distance: 1 priority: 0 phase2s: SCR-REMOTEVPN-PH2 proto 0 src 0.0.0.0/0.0.0.0:0 dst 0.0.0.0/0.0.0.0:0 dhgrp 5 replay keep-alive dhcp policies: none Here is the configuration: config vpn ipsec phase1-interface edit "SCR-REMOTEVPN" set type dynamic set interface "wan1" set dhgrp 2 set xauthtype auto set mode aggressive set proposal aes256-sha1 aes256-md5 set authusrgrp "VPN-group" set psksecret ENC xxx next config vpn ipsec phase2-interface edit "SCR-REMOTEVPN-PH2" set keepalive enable set phase1name "SCR-REMOTEVPN" set proposal aes256-sha1 aes256-md5 set dhcp-ipsec enable next end But when I try to connect from a remote device (I tested with an Android Phone), the phone fail to connect and the fortinet return this error : 2012-07-20 13:08:51 log_id=0101037124 type=event subtype=ipsec pri=error vd="root" msg="IPsec phase 1 error" action="negotiate" rem_ip=xxx loc_ip=xxx rem_port=1049 loc_port=500 out_intf="wan1" cookies="xxx" user="N/A" group="N/A" xauth_user="N/A" xauth_group="N/A" vpn_tunnel="N/A" status=negotiate_error error_reason=no matching gateway for new request peer_notif=INITIAL-CONTACT I tried searching on the web, but i did not find anything revelant to this. Do you have any idea of what can be the problem ? I tried many combinaisons of settings on the fortigate without success..

  Read the article

• Cisco: Site-to-site VPN with cisco 878 and ASA weirdness

  - by cpf

  I currently have 2 sites, both connected to each other through 2 firewalls / routers in a site-to-site VPN. Pinging from server to server (Using 2mb/2mb SDSL) through that VPN obviously works, however, at one site, we have another internet connection (7m/400k ADSL), and only the link between the two sites should be on the other connection. All pc's should go over the other connection for internet, just communication between servers & Communication between pc's and the server at the other side should go through there too. What is configured at the moment is the server is using the SDSL directly as default gateway. Since it's not intended to surf anything it is a safe config. PC's are configured on the ADSL as default gateway. Now I wanted to route through everything that uses the range used on the other site, it should be sent from the ADSL modem to the SDSL modem, which has the VPN connection. I figured I could use OSPF to do so, however, OSPF doesn't seem to "detect" the range of the external site. Also (due to bad ip subnetting thanks to the other administrator), the ip used internally as the server on the other site also exists on the internet (causing a lot of confusion), so rdp-ing from our server to the server of the other site works (somehow), but tracerouting on the SDSL router (which should actually, in my opinion, go over the VPN) actually goes all over the internet. My question(s): Why doesn't the SDSL router ping the external ip through VPN, but the server does? Why can't I route from the ADSL router to the SDSL over VPN? I would seriously appreciate some help, since I can't figure out why it does it like this.

  Read the article

• Active RDP session over VPN getting disconnected

  - by Wandering Penguin

  I am having seemingly random disconnects of active RDP sessions (I am actively typing or otherwise interacting with the desktop) when connected over the VPN connection. The attempted to reconnect 1/20 pops up and proceeds all the way through 20 then drops. Once the session drops I can open a new session and connect again. This started happening about a week ago, The VPN connection is an IPSec VPN connection from a SonicWall NSA 2400. The NIC drivers are up to date. The VPN client is up to date. The firmware on the SonicWall is up to date (both regular and the early-release versions work the same). I have attempted to connect over three ISPs all with the same behavior. Two different workstations were used to test the VPN connection. The same behavior occurs when connecting to a domain workstation or server. If I am within the firewall I can connect to the same workstations and servers with the disconnect. The VPN connection has "enable fragmented packet handling" and "ignore DF (don't fragment) bit" set. Is there something I am missing in where I am looking for the problem?

  Read the article

• Cannot connect to a VPN server - authentication failed with error code 691

  - by stacker

  When trying to connect to a VPN server, I get the 691 error code on the client, which say: Error Description: 691: The remote connection was denied because the user name and password combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server. I validated that the username and password are correct. I also installed a certification to use with the IKEv2 security type. I also validated that the VPN server support security method. But I cannot login. In the server log I get this log: Network Policy Server denied access to a user. The user DomainName\UserName connected from IP address but failed an authentication attempt due to the following reason: The remote connection was denied because the user name and password combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server. Any idea of what can I do? Thanks in advance! Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 12/29/2010 7:12:20 AM Event ID: 6273 Task Category: Network Policy Server Level: Information Keywords: Audit Failure User: N/A Computer: VPN.domain.com Description: Network Policy Server denied access to a user. Contact the Network Policy Server administrator for more information. User: Security ID: domain\Administrator Account Name: domain\Administrator Account Domain: domani Fully Qualified Account Name: domain.com/Users/Administrator Client Machine: Security ID: NULL SID Account Name: - Fully Qualified Account Name: - OS-Version: - Called Station Identifier: 192.168.147.171 Calling Station Identifier: 192.168.147.191 NAS: NAS IPv4 Address: - NAS IPv6 Address: - NAS Identifier: VPN NAS Port-Type: Virtual NAS Port: 0 RADIUS Client: Client Friendly Name: VPN Client IP Address: - Authentication Details: Connection Request Policy Name: Microsoft Routing and Remote Access Service Policy Network Policy Name: All Authentication Provider: Windows Authentication Server: VPN.domain.home Authentication Type: EAP EAP Type: Microsoft: Secured password (EAP-MSCHAP v2) Account Session Identifier: 313933 Logging Results: Accounting information was written to the local log file. Reason Code: 16 Reason: Authentication failed due to a user credentials mismatch. Either the user name provided does not map to an existing user account or the password was incorrect.

  Read the article

• Can I attach a VPN firewall to an existing network and have it manage VPN connections?

  - by jules

  I'm quite new to networking and am trying to set up my first VPN connection. The Situation: I have been contracted for some programming at a facility some distance from my location. I would like to be able to set up a simple VPN connection to their network so that I may make adjustments without significant travel. Their Current Network: Six devices (one I need to connect to) plugged into a basic router (Dlink). This router has an internet connection and a static ip address. My Hopeful (questionable) Proposal: I attach a VPN Firewall I happen to own (Netgear FVS318) as device number seven on the client network. I disable routing / DHCP in the Netgear. I forward the appropriate IPSec ports from the Dlink to the Netgear. I then create a VPN connection on my office Windows 7 machine to the remote network. The request is forwarded from the Dlink to the Netgear where the VPN connection is authenticated. I now have a remote-access connection from my office PC to the client's local network. The Question: Will this proposal work? If not, would another possibility be to attach a computer with a VPN server to the client network? Also, as a note: the client has requested I not replace their router or place mine in-between theirs and the internet :( Thanks very much!

  Read the article

• Split Tunnel VPN using incorrect Tunnel

  - by Brian Schmeltz

  Our company has a handful of field offices that have recently been setup with a regular internet connection after we removed the T1 and router that connected them directly to our network. Now, when the users are in the office, they log in to the VPN to be able to connect to the network. For the sake of them being able to print and scan from the local multi-function we have setup a split tunnel VPN. We currently have about 15-20 users using this setup around the country without any problems. Recently one of our users started having problems accessing internal programs/sites when connecting from both home and the office. There are three other users in the same office and they do not have this problem. I assumed that it was something with the computer and went ahead and replaced it with another of the same model. The computer worked fine in our home office; however, when the user received it, she had the exact same problem both at home and in the field office. Thinking it may be a NIC driver issue I sent her another computer, this time a different model, same problem occurred. If I update the host file to point to the correct paths, things will work, and if I connect via a normal VPN connection everything works, but the user cannot scan or print - which is a problem. Have tried to find ways to create another tunnel on a normal VPN and have tried to find ways to force the correct tunnel on the split tunnel VPN. It appears that there is something related to the ISP because if I connect to Comcast or Verizon it is fine but once she connects to Insite then she has problems. I have been unable to get any support from Insite as they don't feel the issue is with them. We use a Nortel VPN client. Any thoughts or ideas would be appreciated.

  Read the article

• Split Tunnel VPN using incorrect Tunnel

  - by Brian Schmeltz

  Our company has a handful of field offices that have recently been setup with a regular internet connection after we removed the T1 and router that connected them directly to our network. Now, when the users are in the office, they log in to the VPN to be able to connect to the network. For the sake of them being able to print and scan from the local multi-function we have setup a split tunnel VPN. We currently have about 15-20 users using this setup around the country without any problems. Recently one of our users started having problems accessing internal programs/sites when connecting from both home and the office. There are three other users in the same office and they do not have this problem. I assumed that it was something with the computer and went ahead and replaced it with another of the same model. The computer worked fine in our home office; however, when the user received it, she had the exact same problem both at home and in the field office. Thinking it may be a NIC driver issue I sent her another computer, this time a different model, same problem occurred. If I update the host file to point to the correct paths, things will work, and if I connect via a normal VPN connection everything works, but the user cannot scan or print - which is a problem. Have tried to find ways to create another tunnel on a normal VPN and have tried to find ways to force the correct tunnel on the split tunnel VPN. It appears that there is something related to the ISP because if I connect to Comcast or Verizon it is fine but once she connects to Insite then she has problems. I have been unable to get any support from Insite as they don't feel the issue is with them. We use a Nortel VPN client. Any thoughts or ideas would be appreciated.

  Read the article

• Windows 8 - no internet connetction to some hosts while VPN is active

  - by HTD

  I use VPN to access the servers at work. When VPN is used, all network traffic to the Internet passes through my company network. It worked without any problems on Windows 7, now on Windows 8 some sites suddenly became inaccessible. Please note - I don't try to connect them over RDP, they are public Internet addresses, outside company network. They are inaccessible using any protocol. Ping returns "General failure.". I know it could be a misconfiguration on my company's server side, but it's very strange, since the same VPN connection used on Windows 7 works properly. What's wrong? Is it a Windows 8 bug, or is there something I could do on my company servers to make VPN work as expected with Windows 8? My company network works on Windows Server 2008 R2 and uses Microsoft TMG firewall. I couldn't find any rules blocking the traffic to mentioned sites, all network traffic for VPN users are passed through for all IPs and protocols. Any clues? UDPATE: Important - one whole day it worked. I hibernated and restarted the computer, connected and disconnected VPN - nothing could break my connection. Today it broke again, and restarting Windows didn't help. And now the solution: route add -p 0.0.0.0 MASK 255.255.255.255 192.168.1.1 Oh, OK, I know what it did, added my default gateway to routing table. But it still didn't work sometimes. So I removed my main network gateway route with: route delete -p 0.0.0.0 MASK 0.0.0.0 192.168.0.1 And added modified with: route add -p 0.0.0.0 MASK 255.255.255.255 192.168.0.1 And it works. Now. But I don't trust this. I don't know what really happened.

  Read the article

• Possible to IPSec VPN Tunnel Public IP Addresses?

  - by caleban

  A customer uses an IBM SAS product over the internet. Traffic flows from the IBM hosting data center to the customer network through Juniper VPN appliances. IBM says they're not tunneling private IP addresses. IBM says they're tunneling public IP addresses. Is this possible? What does this look like in the VPN configuration and in the packets? I'd like to know what the source/destination ip/ports would look like in the encrypted tunneled IPSec Payload and in the IP packet carrying the IPSec Payload. IPSec Payload: source:1.1.1.101:1001 destination:2.2.2.101:2001 IP Packet: source:1.1.1.1:101 destination:2.2.2.1:201 Is it possible to send public IP addresses through an IPSec VPN tunnel? Is it possible for IBM to send a print job from a server on their network using the static-nat public address over a VPN to a printer at a customer network using the printer's static-nat public address? Or can a VPN not do this? Can a VPN only work with interesting traffic from and to private IP addresses?

  Read the article

• Regular Windows 7 BSOD with Shrew VPN client

  - by Junto

  The Shrew VPN client appears to be a good alternative to the Cisco VPN Client on x64 Windows 7. However, since installing it I've seen fairly regular BSODs. Minidump attached: Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [D:\Temp\020810-23431-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7600 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7600.16385.amd64fre.win7_rtm.090713-1255 Machine Name: Kernel base = 0xfffff800`0285f000 PsLoadedModuleList = 0xfffff800`02a9ce50 Debug session time: Mon Feb 8 18:08:12.887 2010 (GMT+1) System Uptime: 0 days 7:52:06.120 Loading Kernel Symbols ............................................................... ................................................................ .............. Loading User Symbols Loading unloaded module list .... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck A, {0, 2, 0, fffff800028d50b6} Unable to load image \SystemRoot\system32\DRIVERS\vfilter.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for vfilter.sys *** ERROR: Module load completed but symbols could not be loaded for vfilter.sys Probably caused by : vfilter.sys ( vfilter+29a6 ) Followup: MachineOwner Machine is a brand spanking new Dell Precision T5500. Superuser appears to have several recommendations for the Shrew VPN Client as an alternative to the Cisco VPN client on 64 bit machines, so I wondered if anyone here has seen this problem and possibly found a solution to the problem? I've decided to run the VPN client under Windows 7 compatibility mode for the moment (Vista SP2) with administrator privileges to see if it makes a difference. Oddly, the VPN doesn't necessarily need to be connected. I've noticed it when browsing using Google Chrome and Internet Explorer, usually when I open up a new tab. If it carries on I think I'll be forced to shell out the 120 EUR for the NCP Client instead.

  Read the article

• Possible to IPSec VPN Tunnel Public IP Addresses?

  - by caleban

  A customer uses an IBM SAS product over the internet. Traffic flows from the IBM hosting data center to the customer network through Juniper VPN appliances. IBM says they're not tunneling private IP addresses. IBM says they're tunneling public IP addresses. Is this possible? What does this look like in the VPN configuration and in the packets? I'd like to know what the source/destination ip/ports would look like in the encrypted tunneled IPSec Payload and in the IP packet carrying the IPSec Payload. IPSec Payload: source:1.1.1.101:1001 destination:2.2.2.101:2001 IP Packet: source:1.1.1.1:101 destination:2.2.2.1:201 Is it possible to send public IP addresses through an IPSec VPN tunnel? Is it possible for IBM to send a print job from a server on their network using the static-nat public address over a VPN to a printer at a customer network using the printer's static-nat public address? Or can a VPN not do this? Can a VPN only work with interesting traffic from and to private IP addresses?

  Read the article

• How to use Cisco AnyConnect VPN Client?

  - by ktm5124

  I wrote a related question earlier, which is still unresolved. This question is much more specific. So I installed Cisco AnyConnect VPN Client on Snow Leopard. I connect to my work VPN. Once connected, I can't ping my work machine. I don't see any computers on the network. If the client were not running, I wouldn't believe myself to be connected to the VPN. Is there something that I am doing wrong? Do I have to route my network traffic through the tunnel manually? (ifconfig route comes to mind) Is the POST request that I am about to submit going to go through the tunnel created by my VPN? I guess the main question is: why do I feel so in the dark? Cisco says I am connected to my VPN, but for all I know it is invisible. N.B. I do have the up-to-date Cisco VPN Client: version 2.3.2016. I installed it about a week ago.

  Read the article

• Windows VPN for remote site connection drawbacks

  - by Damo

  I'm looking for some thoughts on a particular way of setting up a estate of machines. We have a requirement to install machines into unmanned, remote locations. These machines will auto login and perform tasks controlled from a central server. In order to manage patching, AV, updates etc I want these machines to be joined to a dedicated domain for this estate. Some of the locations will only have 3G connectivity (via other hardware), others will be located on customer premises in internal networks. The central server (of ours) and the Domain Controller will be on a public WAN. I see two ways of facilitating this. Install a router at each location and have a site to site VPN between the remove device and the data centre where the servers are location Have the remote machine dial up and authenticate via a Windows VPN connection to the DC via RAS Option one is more costly to setup and has a higher operational cost. It also offers better diagnostics if the remote PC goes down. Option two works well but is solely dependent on the VPN connection been made before any communication can be made to the remote machine. In a simple test, I can got a Windows 7 machine to dial a VPN prior to authentication to a domain, then automatically login to the machine using domain credentials. If the VPN connection drops, it redials. I can also create a timed task to auto connect every hour in case of other issues. I'd like to know, why (if at all) is operating a remote network of devices which are located in various out of band locations in this way a bad idea? Consider 300-400 remote machines all at different sites. I'd rather have 400 VPN connections to a 2008 server than 400 routers, however I'd like to know other opinions on this.

  Read the article

• Route specific network traffic through vpn in virtualbox guest

  - by Sander

  I am running OSX with a windows server 2008 guest in Virtualbox. My goal is to route some of the network traffic in the host through the server guest. This is because the win2008 server has a VPN connection to my workplace using a Smartcard solution which can not operate on OSX. My current set-up is like this: OSX (Host): connected to the internet via en01 Win2008 (Guest): connected to the internet using NAT (lan1 in guest) has a SSTP VPN connection to my workplace is connected to the guest using an Host Only Adapter vboxnet0 (LAN2 in guest) The important part is about the host (OSX). Primarily I want all network traffic to just go through en01. However, all traffic which can only be accessed through the VPN must go through the guest and through the VPN. I have one specific FQDN which can only be accessed through the VPN (say corp.mycompany.com). I do not know much about networking. I thought I would be able to get it to work by bridging together LAN2 and LAN1 but this didn't seem to work this: http://archives.aidanfindlater.com/blog/2010/02/03/use-vpn-for-specific-sites-on-mac-os-x/ using a loopback adapter on WinXP (when I did not have win2008 yet, but this doesn't work because I can't create a PPTP connection) And I've also read about Routing and Remote Access but I have no idea on how to use this. Can someone help me in the right direction?

  Read the article

• Internet Explorer not working after establishing a SSTP VPN connection

  - by Massimo

  I have a problem which is constantly appearing on each Windows 7 computer I'm using, whenever I establish a SSTP VPN connection to a ForeFront TMG 2010 firewall; it only happens with SSTP connections, not PPTP/L2TP ones. The problem appears only if using a proxy server for Internet access; it doesn't happen when directly accessing the Internet (with or without NAT). It doesn't seem to depend on a specific proxy software being used (I've seen it happening with various ones). The problem is: as soon as I start the VPN connection, Internet Explorer can't access anything anymore. I'm not using the VPN connection as a default gateway, and I can succesfully ping the proxy server after the VPN connection is esatablished (and even telnet to its 8080 TCP port), so this is definitely not a routing problem. Also, the problem is specifically related to Internet Explorer: while it seems not able to connect to any site, other programs (such as FireFox) have no problem accessing the Internet through the same proxy. This behaviour can be easily reproduced on any Windows 7 computer (the service pack and patch level doesn't seem to matter at all). Have IE connect through a proxy, establish a SSTP VPN connection... and IE will just not work anymore until the VPN connection is dropped.

  Read the article

• Choose a VPN software on CentOs 6.5

  - by loyCossou

  We are installing a SMS gateway with Kannel, on a CentOs 6.5 server, which is supposed to connect via SMPP to our local operators. Kannel is working fine and no probleme there. Now 2 operators are asking to connect via a VPN for obvious security reasons; actually they asked for or VPN details so they can connect to it... Now, I am looking for a free VPN that I can setup and configure on our server... I saw Open VPN that I already started configuring, no issue... But just saw on Wikipedia (http://en.wikipedia.org/wiki/OpenVPN#Platforms) that OpenVPN is not compatible with other VPN packages. Now my question is: 1- I am absolutely new to VPN technologies. Is OpenVPN a good choice in my situation? 2- If I configure OpenVPN on my server, will it be possible to any client to connect to my server? 3- Anyone have any advice for me? Thank you for this great community.

  Read the article

• LAN Webserver not accessible through PPTP VPN

  - by Joe

  I have this LAN Network with 10 clients and one server. The server has 4 virtual machines and a BIND DNS Server. When the router assigns an IP through the DHCP , it also gives the ip of the DNS Server, to resolve internal domains. Everything apparently works fine, the clients being able to access the server's vm's resources, but I also have to create the possibility of remote access. I installed the PPTP VPN on the server, and the vpn clients would get the same ip address range as the router's dhcp is assigning. Apparently everything is fine here also, except the fact that when we connect through the vpn , we cannot access the webserver on port 80 ( the webserver being one of the server's VM ). The iptables on the webserver has been turned off for testing purposes and the router's firewall is directing all the external traffic to the server. Can somebody suggest a solution to this? Extra details : VPN Server : PPTP Server Centos 6.3 x64 VPN Client : Windows 7 default PPTP VPN Connection The client is successfully connected to the server, everything works ( FTP/MYSQL/SSH/DNS ) , except the fact that when I try to access the webserver IP on the browser, it won't work.Pinging it works perfectly.

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >