Search Results

Search found 17187 results on 688 pages for 'vpn connection'.

Page 13/688 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Watchguard box VPN Access X700

  - by Paulio001

  We have a watchguard X700 box that we are trying to get VPN access through. We have had a play with the ports and tried to open the VPN access but still have no joy. Do we need to purchase a special licence to get VPN open on this box?

  Read the article

• Using Cisco VPN in Windows 7 XP Mode?

  - by Shane

  I previously asked a question about whether it was possible to use Cisco VPN client on Windows 7 64-bit (see below). Now that I have it set up, it doesn't work when I try to connect off the local network. I realize that there must be some networking/routing that I need to do since it's running on a virtual machine. How does one go about using the Cisco VPN client from XP mode in Windows 7? Related: Cisco VPN Client on Windows 7 64-bit?

  Read the article

• VirtualMachine logs into VPN, share connection with host

  - by srirangan

  My customer's VPN will only work on IE6 32bit. So I got a Windows XP 32bit VM installed and got the VM to connect into the VPN. I would now like to share VPN connection with the host (Windows 7 64bit). How do I go about it? Thanks, Sri

  Read the article

• screen resume works on top of VPN

  - by michael

  I connect to my network using VPN. I have screen running and 'ssh' to a server. I then kill my shell and I was able to 'resume' by 'screen -r'. This works as expect. But when I disconnect VPN and re-connect VPN, and type 'screen -r' again. I was not able to get my last screen again. And I see "Write failed: Connection reset by peer46.11 MiB | 642 KiB/s" in the screen. Can you please tell me if it possible to reconnect 'screen' if my VPN is disconnect. Thank you.

  Read the article

• Restrict VPN client traffic to certain domains/IP

  - by mr-euro

  Hi Is there any way to restrict a VPN client to only route certain traffic via the VPN and the rest via their local gateway? For example: traffic to a certain IP or domain gets routed across the VPN and all other requests do not. Let me know if you need more details. Thank you.

  Read the article

• iPhone Remote with iTunes Library via VPN

  - by sudo work

  Alright, so I'm currently behind a network router (not under my control). The router performs NAT and somehow prevents a computer from scanning other nodes. At least, you're unable, in this instance, to locate an iTunes library. You can, however, communicate with a node's open ports if the local IP address is known, as well as the port. I haven't actually tried port scanning a specific IP using nmap or another tool yet. So I've tried one solution to remove the contribution of the router entirely (to verify that it works without the influence of the routers). I set up an access point using my iPhone and tethered my computer (with the library) to it. From here, I was able to pair my library and the iPhone Remote application. Control of the library was normal as well. This solution is not ideal, however, because I am actively using bandwidth with my computer and cannot afford to be tethered to my 3G connection. A viable solution for me is to use a common VPN connection, which I have set up on a Ubuntu (Intrepid) server that is remote. Both my computer and iPhone are able to access the VPN via PPTP. The server is setup with PPTPD as the VPN-server; I'm using IPTables to perform IP masquerading and forwarding traffic. I however, still cannot connect the library to the phone. I can however, see both devices on the VPN subnet (192.168.0.0/24). SSH'ing and such works fine. What settings on the VPN server must I change to get this to work? Also, how can I assign static IP addresses to various PPTP clients based on MAC addresses?

  Read the article

• Connecting to VPN via Proxy

  - by Rodrigo

  Hi, My company's VPN server is located in Netherlands, from my current location this is a really crappy place in terms of connectivity, connection keeps dropping, it's slow and keeps being reset during high traffic times. I have a dedicated server over USA which is able to connect to VPN server without this issues, connection is stable and fast. My question is, how do I connect to this VPN using a proxy running on my dedicated server? I'm on Windows 7 using a VM on XP to connect to the VPN. Thanks.

  Read the article

• How to connect with a vpn connection without any prompt in windows 8

  - by saber tabatabaee yazdi

  In windows 7 , we can define a hotkey for connect to internet via VPN connection immediately without any prompt, through these Steps: Create shortcut for VPN connection for example in Desktop. Define a hotkey for that shortcut In VPN properties options TAB dialing options uncheck this checkbox : "prompt for name and password..." This checkbox not exist in windows 8 so we cant define in Windows 8 like that.

  Read the article

• IIS8 behind a VPN + Windows Server 2012 - how to properly bind IP+Port

  - by ryugen

  This is my first question so I hope I'm going to give you enough information. I'm running Windows Server 2012 within the Hyper-V environment of my Windows 8 machine. Within Windows Server 2012 I'm running a VPN tool based on openVPN to hide my real IP. When I run IIS8 with the VPN disconnected it works flawlessly through the Internet (port 80 forwarded correctly). But as soon as I connect to the VPN I can't reach my site through the domain anymore. Now I tried basically everything I know which is why I'm asking you guys. I tried binding IIS8 to the IP of my virtual ethernet card. I tried changing the priority of the NIC through the "Network and sharing center" via the advanced tab. I used ipconfig /flushdns in case there was something wrong in the DNS handling. Hell, I even turned off the Windows firewall. I also used a port scanner to verify the problem. The webserver is reachable on port 80 with VPN disconnected and immediately gets unreachable on connect. Theoretically both IPs (my regular one AND the VPN) should be reachable or at least not impair the other one right? Do you have any other suggestion? Do I have to route something somewhere somehow?

  Read the article

• Can't connect to a machine via Cisco VPN on Mac

  - by Alex

  Hi there, I have a curious problem. I can connect to work's vpn using Cisco VPN Client. I can get internet through that vpn. When I go check the IP online it tells me the IP address of the server I connected. However, when I try to ping one of the machines at work I get nothing. And traceroute says there is no route to the destination. But works for google. Any ideas? Is some traffic not sent through the VPN on mac Alex

  Read the article

• Setting up a vpn and IIS IP address restrictions

  - by carpat

  I'm trying to get a VPN set up with internal access only sites. I have set up a VPN on a windows server (single VPS server), and I can connect from a remote computer and I get an IP assigned correctly (from 192.168.1.1 - 255) Next I configured IIS (running on the same machine) IP Address and Domain Restrictions to only allow only IP address range 192.168.1.0 with subnet mask 255.255.255.0 When I connect to the VPN with "Use Default Gateway on Remote Network" (so that requests must go through the vpn), I get a 403 from the internal sites. What did I miss?

  Read the article

• Connect iPad to windows 7 VPN

  - by Linuz

  My iPad keeps spitting out the error: "A connection could not be established to the PPP server." I am trying to connect it to a VPN I set up with Windows 7 as an incoming connection. On the iPad, I went into the VPN settings, added a new PPTP VPN with the following information Server: Windows 7 Computer's IP RSA SecurID: OFF Account: Account Username Password: Account Password Encryption Level: Auto Send All Traffic: ON Proxy: Off Now I know that it is making some connection to the Windows 7 Computer because whenever I intentionally put in the wrong VPN password on the iPad, it makes me put in the correct one before trying to connect again. All the ports are forwarded on my router for PPTP, and my Windows 7 Firewall is even off to try to get this to work. Any help would be greatly appreciated, thanks.

  Read the article

• No External Network Access Through Ubuntu VPN

  - by trobrock

  I have setup pptpd as my VPN server on Ubuntu Server 9.04, I am able to connect to the VPN from the client and can access the server's local network, but I am unable to connect to the external network via the VPN. If I login to the server via SSH: $ ping google.com PING google.com (74.125.67.100) 56(84) bytes of data. 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=1 ttl=49 time=65.9 ms 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=2 ttl=49 time=63.2 ms 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=3 ttl=49 time=63.9 ms 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=4 ttl=49 time=66.0 ms If I connect to the VPN and ping locally: $ ping google.com ping: cannot resolve google.com: Unknown host I have a feeling it is some routing issue on the server but I am unsure.

  Read the article

• Netgear FVS336G as VPN Server

  - by Farseeker

  Hi All, One of our offices has made the move away from PFSense to a Netgear FVS336G. The one feature I can't seem to figure out is its VPN capabilities. I'm confused as to whether this device can act as a IPSEC VPN server, or if it can only act as the client in a Site-Site VPN. The documentation does not make this clear at all, and Google does not seem to have been any help. (Related question: here)

  Read the article

• Exposing the AnyConnect HTTPS service to outside network

  - by Maciej Swic

  We have a Cisco ASA 5505 with firmware ASA9.0(1) and ASDM 7.0(2). It is configured with a public ip address, and when trying to reach it from the outside by HTTPS for AnyConnect VPN, we get the following log output: 6 Nov 12 2012 07:01:40 <client-ip> 51000 <asa-ip> 443 Built inbound TCP connection 2889 for outside:<client-ip>/51000 (<client-ip>/51000) to identity:<asa-ip>/443 (<asa-ip>/443) 6 Nov 12 2012 07:01:40 <client-ip> 50999 <asa-ip> 443 Built inbound TCP connection 2890 for outside:<client-ip>/50999 (<client-ip>/50999) to identity:<asa-ip>/443 (<asa-ip>/443) 6 Nov 12 2012 07:01:40 <client-ip> 51000 <asa-ip> 443 Teardown TCP connection 2889 for outside:<client-ip>/51000 to identity:<asa-ip>/443 duration 0:00:00 bytes 0 No valid adjacency 6 Nov 12 2012 07:01:40 <client-ip> 50999 <asa-ip> 443 Teardown TCP connection 2890 for outside:<client-ip>/50999 to identity:<asa-ip>/443 duration 0:00:00 bytes 0 No valid adjacency We finished the startup wizard and the anyconnect vpn wizard and here is the resulting configuration: Cryptochecksum: 12262d68 23b0d136 bb55644a 9c08f86b : Saved : Written by enable_15 at 07:08:30.519 UTC Mon Nov 12 2012 ! ASA Version 9.0(1) ! hostname vpn domain-name office.<redacted>.com enable password <redacted> encrypted passwd <redacted> encrypted names ip local pool vpn-pool 192.168.67.2-192.168.67.253 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.68.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address <redacted> 255.255.255.248 ! ftp mode passive dns server-group DefaultDNS domain-name office.<redacted>.com object network obj_any subnet 0.0.0.0 0.0.0.0 pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu inside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected ! object network obj_any nat (inside,outside) dynamic interface timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL http server enable http 192.168.68.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto ca trustpoint _SmartCallHome_ServerCA crl configure crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=vpn proxy-ldc-issuer crl configure crypto ca trustpool policy crypto ca certificate chain _SmartCallHome_ServerCA certificate ca 6ecc7aa5a7032009b8cebcf4e952d491 <redacted> quit crypto ca certificate chain ASDM_TrustPoint0 certificate f678a050 <redacted> quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.68.0 255.255.255.0 inside ssh timeout 5 console timeout 0 vpn-addr-assign local reuse-delay 60 dhcpd auto_config outside ! dhcpd address 192.168.68.254-192.168.68.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ssl trust-point ASDM_TrustPoint0 inside ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside enable inside anyconnect image disk0:/anyconnect-win-3.1.01065-k9.pkg 1 anyconnect image disk0:/anyconnect-linux-3.1.01065-k9.pkg 2 anyconnect image disk0:/anyconnect-macosx-i386-3.1.01065-k9.pkg 3 anyconnect profiles GM-AnyConnect_client_profile disk0:/GM-AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_GM-AnyConnect internal group-policy GroupPolicy_GM-AnyConnect attributes wins-server none dns-server value 192.168.68.254 vpn-tunnel-protocol ikev2 ssl-client default-domain value office.<redacted>.com webvpn anyconnect profiles value GM-AnyConnect_client_profile type user username <redacted> password <redacted> encrypted tunnel-group GM-AnyConnect type remote-access tunnel-group GM-AnyConnect general-attributes address-pool vpn-pool default-group-policy GroupPolicy_GM-AnyConnect tunnel-group GM-AnyConnect webvpn-attributes group-alias GM-AnyConnect enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context call-home reporting anonymous Cryptochecksum:12262d6823b0d136bb55644a9c08f86b : end Clearly we are missing something, but the question is, what?

  Read the article

• Change the order of DNS lookup when connected in the VPN

  - by qwerty2010

  Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

  Read the article

• Log internet requests made by vpn client

  - by Adam Schiavone

  How can I log the requests that people make to the internet when they are connected to my VPN? If one of them does something illegal, I need to be able to prove that it was not me, but a VPN client. This really is a just in case type thing. So, I want to be able to see the details (server, port, domain name, and time connected) in a file somewhere. Does windows offer this with its PPTP VPN service, or is there 3rd party software to do this (Free is better)? EDIT I have setup accounting, but that does not seem to tell me what I am looking for. Could someone comment on what accounting does? EDIT 2 Maybe I should heve been clearer. My system is running windows server 2008 r2 and using the stock VPN software (PPTP)

  Read the article

• Cisco VPN endpoints disconnecting from a VLAN

  - by dunxd

  I have a number of Cisco ASA 5505 and PIX 506e around the world acting as VPN endpoints. They connect to a Cisco VPN Concentrator 3000 at HQ. I am using EZVPN to set up the VPN (i.e. most of the config is central on the VPN Concentrator) The majority of endpoints work absolutely fine. However, there are three that do not. 2 ASAs and 1 PIX get disconnected from one of the VLANs on our network. This is the VLAN that my monitoring server runs on - so those endpoints look as if they have gone down. However, I can still ping the endpoints from our user VLAN. If I then SSH onto the endpoint, and do a ping to my monitoring server, the connection comes back. Then after about 10 minutes it stops working again. I've looked at the configuration of my endpoints, and I can't see any significant differences. One common feature is that the affected endpoints are connecting to the internet via retail quality routers. However, I don't see how this could affect traffic within a VPN tunnel. Any ideas or suggestions? I've also got a thread on Cisco's forums at https://supportforums.cisco.com/thread/344638. One other person has reported the same problem.

  Read the article

• VPN being blocked somewhere between either my BT2700HGV and DLink DFL-210

  - by Dom

  Hi, For some time I have been unable to get VPN working through my set up. I have a BT2700HGV Router (2 Wire Model) and as a firewall I have the Dlink DFL-210. You can't turn the firewall completely off on the BT2700HGV so I have it set to DMZplus mode for the Firewall. In theory this should then allow the VPN ports through. On the Firewall I have a series of rules set up and one is the pptp-allow rule which should allow access on the correct ports also. When I try to connect via VPN however the client machine gets an error 809. If I check the log on the Dlink firewall, I see this record: http://dl.dropbox.com/u/1041315/packetdrop.PNG The laptop I am testing the vpn with is connected directly to the BT2700HGV router and I am trying to VPN from it onto 81.138.86.217. I can't work out whether I have some sort of problem in the set up of the rules on my firewall or if the BT router (even though it's in DMZplus mode) is still blocking port 1723. I read somewhere that there where problems because BTs Openzone held onto this port for some reason. Any help would be greatly appreciated. If you need further screen shots or information then please let me know. I wasn't able to create new tags for the router and firewall name or insert the picture in as I am new to the forum. Dom :-)

  Read the article

• VPN Connects with local access only

  - by user20102

  I have Windows Server 2008 and I have set up a VPN. When a user logs into their VPN they can not view the internet. It comes up as local access only on the the client PC. On the server when I go to the Network And Sharing Centre it displays (Network) with local and internet below it has the RAS Dial-in interface and it displays as local only there as well. I want all users that connect to my VPN to have internet access (full access). If anyone can help me it would be appreciated. Also I've activated dial-in properties and I've done it via policy who can access the VPN and internet. It still doesn't work, but there is a connection but just local only. Thanks

  Read the article

• Cisco ASA 5505 VPN setup

  - by Guillaume

  Hello, I'm trying to setup a site to site VPN, with a Cisco ASA 5505 at one end. The documentation tells me to use the Ipsec VPN wizard but under the wizards drop down menu there's nothing VPN related there. I have a 'base' license, is that the issue? or am I being stupid? The versions I have are: Cisco Asa 5505 with ASA 8.2(1) and ASDM 6.2(1), the firewall was already setup when I got it (I'm leasing a dedicated server). Thanks for your help

  Read the article

• How to change aging AD password while connected over VPN from Mac

  - by Franek Kuciapa

  I am connecting to the office from mac via VPN, Cisco AnyConnect Secure Mobility Client. I do not know what to do when my AD password on the firm side will age and approach expiration to ensure that my Mac and VPN continue to work afterwards. Is the proper thing to do in this case to connect via VPN and then change the password on Mac via System Preferences, Users & Groups? Will this update the AD on the server side? Will it sync the PointSec as well that is running on the Mac? Or is a better procedure to RDP to a Windows box while connected over VPN and change the password there hoping the Mac will somehow sync up ?? Running Mountain Lion on the Mac.

  Read the article

• Lan, vpn on Amazon EC2, how to?

  The problem is as follows: I have 2 windows2003 server instances running on the cloud. 1) How can I create a local area network from these 2 instances? 2) Assuming that I want to create a VPN network from these 2 instances, how do I do that? (I'm not very good in networking, therefor the above problem description might be incomplete or not very clear.) A detailed answer or clarification would be praised and appreciated! What I tried: 1) Setting up OpenVPN, but I got lost in the process. 2) Creating a VPN from windows2003 server in the following manner: on instance a): set up a dhcp server; set up an "accept income vpn" connection; with the followin tcp ip settings: obtain an ip from the dhcp server; on instance b): created a new vpn connection, tried to connect to intance A, using the instance A static IP but error 806 was thrown, something relate to a GRE protocol.

  Read the article

• Change the order of DNS lookup when connected in the VPN

  - by qwerty2010

  Hi, Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

  Read the article

• VPN Error 868 when connecting even if using IP address

  - by Fr33dan

  I am trying to connect to a public VPN from VPNGate. However when I attempt to connect to a VPN from the list using MS-SSTP protocol I get the following error: Error 868: The remote connection was not made because the name of the remote access server did not resolve. If I open a command prompt and ping the address in question it resolves to the IP shown on the listing. If I configure the VPN using that IP address directly I still receive the error even though the name no longer needs to resolve. This was working yesterday but it seems the VPN I was using has been removed from the list. What is happening and how can I fix it?

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >