Search Results

Search found 9688 results on 388 pages for 'external hdd'.

Page 110/388 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• configuring linux server to send traffic to local machines using local IP address

  - by gkdsp

  Two linux servers, server1 and server2, are on the same local network (they also have access to an external network). Server2 has a local IP of 192.168.0.2 and a host name of host2.mydomain.com. QUESTION 1: If an application on server1 sends traffic to server2 using a host name of host2.mydomain.com, what determines whether this traffic is routed to server2 using the local or external network? QUESTION 2: To ensure that all traffic sent from server1 to server2 always uses the local network, could I simply include in the server1 /etc/hosts file the following? 192.168.0.2 host2.mydomain.com ...the thinking being, if the servers are always on the same network there should never be a need for server2 to send traffic to server1 via the external network (that I can think of anyway). Is this done in practice, or is some other method preferred?

  Read the article

• Make Exchange 2007 use the correct SSL certificate

  - by Neil

  I have an SBS 2008 server contososerver.contosodomain.local which is externally accessible with the domain remote.contoso.com and an SSL certificate for the external domain which we installed using the SBS 2008 wizard. This works great for OWA because IIS serves the remote.contoso.com certificate. I also want to turn on external POP3/IMAP4/SMTP however when I try, I get served the internal certificate that SBS generated automatically (using its internal CA) which has the alternate names remote.contoso.com, contososerver.contosodomain.local and contososerver. I tried removing this certificate from Exchange but it won't let me because it needs it for its internal receive connector. So how do I tell Exchange 2007 to use the real certificate for external POP3/IMAP4/SMTP?

  Read the article

• Routing based on source address in Windows Server 2008 R2

  - by rocku

  I'm implementing a direct routing load balanced solution using Windows Server 2008 R2 as back-end server. I've configured a loopback interface with the external IP address. This works, I am receiving packets with the external IP address and respond to them appropriately. However our infrastructure requires that traffic which is being load-balanced should go through a different gateway then any other traffic originating from the server, ie. updates etc. So basicly I need to route packets based on source address (external IP) to another gateway. The built-in Windows 'route' command allows routing based on destination address only. I've tried setting a default gateway on the loopback interface and mangled with weak/strong host send/receive parameters on the interfaces, however this didn't work. Is there any way around this, possibly using third party tools?

  Read the article

• Exchange 2007 - Distribution group not work correctly

  - by AlexB

  I have simple server Windows 2008 Standart SP2 with Exchange 2007 with apply SP1. Only one DC and one Exchange server (not exist Edge) in the same server. I have first distribution group by name "[email protected]" with 10 users. Working with internal and external mail correctly. I have second distribution group by name "[email protected]" with 3 users. Working with internal mail correctly, but external mail delivery failed 2 from 3 users. Only 1 users proclaims that external mail delivered correctly. Those 3 users they are too member of distribution group [email protected]" . I am not found in the eventlog any problem with Exchange server. Any user and any distribution group not check the box "Require that all senders are authenticated." Any ideas on how to solve the problem?

  Read the article

• Crap, hard disk failure. Can I recover my "move"d folders?

  - by Doug

  I am in the process of moving all my files from an old laptop to new one. I just moved 11gb of data from my old laptop to a hard drive (external) and then upon moving it out to the new hard drive, the hard drive is getting a CRC (Data Error (Cyclic Redundancy Check). Now I am looking for a solution to recover the files that I moved on my old laptop (not the external). I understand they they are just marked for potential overwriting to free up space. I was getting ready to test out GetDataBack, but it says to install it on a healthy windows and use the recover-needed drive as an external. However, I don't want to turn off my computer without first getting the okay since it is in a "moved" state. Please help! What can I do to recover the Moved files. I haven't touched the computer since it has been moved. What can I use to recover them?

  Read the article

• Is there a way to schedule an automatic WinClone run on my Bootcamp partition?

  - by user17873

  Hi, I've currently got time machine setup to back up my entire OS X installation. I also have a backup tool within my Bootcamp Windows 7 installation which automatically backs up my windows profile data to an external drive partition. Finally, I'm also backing up my Bootcamp partition weekly and storing on an external drive using WinClone. The final piece I need to complete my external backup process is to have the WinClone application backup my Bootcamp partition automatically once a week rather than having to call it manually and remember. Is this possible?

  Read the article

• What's the most reliable (i.e. time-proof) solution for organizing photos?

  - by digitxp

  I pooled together my photos from an old external hard drive, various Picasa Web caches, flickr, flash drives, and an old computer. They're all on my external hard drive, using extremely creative labeling, like allpictures pixix pix2 images familyphotos and so on (hey, I was 7 when I organized them last). My computer's hard drive can die at any minute, and the external is new but who knows what that means? I am planning to start reorganizing these picture, probably by face or time. I have Bridge CS5, Picasa, etc., but which one is the most likely to not crash and burn like my Vista laptop did with a ZIP file filled with pictures of a funeral?

  Read the article

• Is a "Soft Modem" (i.e. internal) really going to cause incompatibilities?

  - by Farseeker

  Thanks to the fact that our banking industry in Australia... outdated (which is the politest word I could think of when describing the banking industry)... to do a certain kind of transaction our bank requires us to use a dialup modem and send serial data to them. When reading through their documentation (last update: 1995), they state that any "Soft Modems" (by which I assume they mean internal modems, as they refer to a AMR socket on a motherboard, which I haven't seen in donkeys years) should not be used because of "possible incompatibilities" Seeing as buying an external, serial-port modem is actually quite expensive these days and I have a whole box of PCI modems taken out of a bunch of Dells I really don't want to have to buy an external modem. Additionally I think their documentation is simply outdated. Has anyone had experience with internal modems causing issues, where an external modem didn't?

  Read the article

• Two Network Adapters on Hyper-V Host - Best way to configure?

  - by GoNorthWest

  I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

  Read the article

• Hard disk failure. Can I recover my "move"d folders?

  - by Doug

  I am in the process of moving all my files from an old laptop to new one. I just moved 11gb of data from my old laptop to a hard drive (external) and then upon moving it out to the new hard drive, the hard drive is getting a CRC (Data Error (Cyclic Redundancy Check). Now I am looking for a solution to recover the files that I moved on my old laptop (not the external). I understand they they are just marked for potential overwriting to free up space. I was getting ready to test out GetDataBack, but it says to install it on a healthy windows and use the recover-needed drive as an external. However, I don't want to turn off my computer without first getting the okay since it is in a "moved" state. Please help! What can I do to recover the Moved files. I haven't touched the computer since it has been moved. What can I use to recover them?

  Read the article

• USB 3.0 Device not detected in Windows 8

  - by Tek

  About my setup: Windows 8 64-bit. X79-UD3 Motherboard. Latest Windows 8 USB 3.0 Drivers from motherboard manufacturer website. All right so device manager detects my USB 3.0 ports, so all is well there. However when I plug in my external USB 3.0 hard drive, windows doesn't even make a beep; the hard drive is not picked up by device manager at all. The SAME thing happens with Ubuntu 12.10 BUT adding PCI=nomsi (as a workaround) to the Grub command line of the Ubuntu boot option makes Ubuntu 12.10 detect my external hard drive. I also have a few other doubts, if you guys would be kind enough to answer them that include: Should XHCI hand-off in the UEFI bios be enabled or disabled for Windows 8? The difference between XHCI hand-off and EHCI hand-off and what are it's effects on USB 3.0 functionality? And last but not least how can I get Windows 8 to recognize my external hard drive when Ubuntu 12.10 (after the Grub workaround) works fine?

  Read the article

• TrueCrypt Corrupted Files

  - by B. Knight

  Several months ago, I needed to reorganize my data across multiple external hard drives with my laptops primary hard drive as the go-between. My external hard drives are all encrypted with TrueCrypt. It appears to me that somehow during the transfer of my files between the encrypted external drive an the unencrypted internal drive, the files were transferred "as-is" (in their encrypted state). The files range from very small to very large. It appears that this may have happened during one consecutive transfer session. Has anyone ever experienced this problem, and if so were you able to fix it? Is there a way to recreate the encrypted partition, transfer the files, and then decrypt them to their usable state? Or can the files somehow be decrypted through other means? UPDATE: I am running Windows 7 (x64) HP now, but may have been runninG ENT. then. Toshiba Laptop 650GB HDD / 4GB Mem. Latest version of TC

  Read the article

• Multiple monitors (3) in notebook using HDMI and vga port, with a graphic card only.

  - by user34427

  I have a HP dv9830us laptop. It has a vga-out and a hdmi-out port. I want to know if it's possible to use 3 devices, each one with different displays, using just one graphic card - NVIDIA GeForce 8600M GS? (Original, vga with an external monitor and hdmi with a full hd tv). Where I can find this kind of information? If not possible, I would like to know alternatives like: "Usb" solutions to be possible to connect to the external lcd or to a TV. The TV should be flawless, but the second monitor can have slow response times; Cheap PCMCIA video cards to be possible to connect to an external monitor, so I would use the hdmi with the tv and this second video card to output to another monitor. I'm using Windows 7 and Ubuntu 10.04. Is this possible in both systems?

  Read the article

• CUDA not working in 64 bit windows 7

  - by Programmer

  I have cuda toolkit 4.0 installed in a 64 bit windows 7. I try building my cuda code, #include<iostream> #include"cuda_runtime.h" #include"cuda.h" __global__ void kernel(){ } int main(){ kernel<<<1,1>>>(); int c = 0; cudaGetDeviceCount(&c); cudaDeviceProp prop; cudaGetDeviceProperties(&prop, 0); std::cout<<"the name is"<<prop.name; std::cout<<"Hello World!"<<c<<std::endl; system("pause"); return 0; } but operation fails. Below is the build log: Build Log Rebuild started: Project: god, Configuration: Debug|Win32 Command Lines Creating temporary file "c:\Users\t-sudhk\Documents\Visual Studio 2008\Projects\god\god\Debug\BAT0000482007500.bat" with contents [ @echo off echo "C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v4.0\bin\nvcc.exe" -gencode=arch=compute_10,code=\"sm_10,compute_10\" -gencode=arch=compute_20,code=\"sm_20,compute_20\" --machine 32 -ccbin "C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\bin" -Xcompiler "/EHsc /W3 /nologo /O2 /Zi /MT " -I"C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v4.0\include" -maxrregcount=0 --compile -o "Debug/sample.cu.obj" sample.cu "C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v4.0\bin\nvcc.exe" -gencode=arch=compute_10,code=\"sm_10,compute_10\" -gencode=arch=compute_20,code=\"sm_20,compute_20\" --machine 32 -ccbin "C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\bin" -Xcompiler "/EHsc /W3 /nologo /O2 /Zi /MT " -I"C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v4.0\include" -maxrregcount=0 --compile -o "Debug/sample.cu.obj" "c:\Users\t-sudhk\Documents\Visual Studio 2008\Projects\god\god\sample.cu" if errorlevel 1 goto VCReportError goto VCEnd :VCReportError echo Project : error PRJ0019: A tool returned an error code from "Compiling with CUDA Build Rule..." exit 1 :VCEnd ] Creating command line """c:\Users\t-sudhk\Documents\Visual Studio 2008\Projects\god\god\Debug\BAT0000482007500.bat""" Creating temporary file "c:\Users\t-sudhk\Documents\Visual Studio 2008\Projects\god\god\Debug\RSP0000492007500.rsp" with contents [ /OUT:"C:\Users\t-sudhk\Documents\Visual Studio 2008\Projects\god\Debug\god.exe" /LIBPATH:"C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v4.0\lib\x64" /MANIFEST /MANIFESTFILE:"Debug\god.exe.intermediate.manifest" /MANIFESTUAC:"level='asInvoker' uiAccess='false'" /DEBUG /PDB:"C:\Users\t-sudhk\Documents\Visual Studio 2008\Projects\god\Debug\god.pdb" /DYNAMICBASE /NXCOMPAT /MACHINE:X86 cudart.lib cuda.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib ".\Debug\sample.cu.obj" ] Creating command line "link.exe @"c:\Users\t-sudhk\Documents\Visual Studio 2008\Projects\god\god\Debug\RSP0000492007500.rsp" /NOLOGO /ERRORREPORT:PROMPT" Output Window Compiling with CUDA Build Rule... "C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v4.0\bin\nvcc.exe" -gencode=arch=compute_10,code=\"sm_10,compute_10\" -gencode=arch=compute_20,code=\"sm_20,compute_20\" --machine 32 -ccbin "C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\bin" -Xcompiler "/EHsc /W3 /nologo /O2 /Zi /MT " -I"C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v4.0\include" -maxrregcount=0 --compile -o "Debug/sample.cu.obj" sample.cu sample.cu sample.cu.obj : error LNK2019: unresolved external symbol _cudaLaunch@4 referenced in function "enum cudaError cdecl cudaLaunch(char *)" (??$cudaLaunch@D@@YA?AW4cudaError@@PAD@Z) sample.cu.obj : error LNK2019: unresolved external symbol ___cudaRegisterFunction@40 referenced in function "void __cdecl _sti_cudaRegisterAll_52_tmpxft_00001c68_00000000_8_sample_compute_10_cpp1_ii_b81a68a1(void)" (?sti__cudaRegisterAll_52_tmpxft_00001c68_00000000_8_sample_compute_10_cpp1_ii_b81a68a1@@YAXXZ) sample.cu.obj : error LNK2019: unresolved external symbol _cudaRegisterFatBinary@4 referenced in function "void __cdecl _sti_cudaRegisterAll_52_tmpxft_00001c68_00000000_8_sample_compute_10_cpp1_ii_b81a68a1(void)" (?sti__cudaRegisterAll_52_tmpxft_00001c68_00000000_8_sample_compute_10_cpp1_ii_b81a68a1@@YAXXZ) sample.cu.obj : error LNK2019: unresolved external symbol _cudaGetDeviceProperties@8 referenced in function _main sample.cu.obj : error LNK2019: unresolved external symbol _cudaGetDeviceCount@4 referenced in function _main sample.cu.obj : error LNK2019: unresolved external symbol _cudaConfigureCall@32 referenced in function _main C:\Users\t-sudhk\Documents\Visual Studio 2008\Projects\god\Debug\god.exe : fatal error LNK1120: 7 unresolved externals Results Build log was saved at "file://c:\Users\t-sudhk\Documents\Visual Studio 2008\Projects\god\god\Debug\BuildLog.htm" god - 8 error(s), 0 warning(s) I will be highly obliged if someone could help me. Thanks

  Read the article

• Setting Up GLFW3 in Visual Studio

  - by sm81095

  I decided a couple of days ago that I was going to start trying to develop games in C++ with OpenGL, instead of C# Monogame like I have been doing for a while. I was looking around for libraries to use, to make OpenGL a little easier to use. I settled on GLEW and GLFW. GLEW was a super easy copy/paste, but GLFW3 was not. After looking around for a while and fighting with CMake, I got the GLFW2.lib file created, and I added the additional include directories, library directories, and linked my program to the glfw3.lib file I just created. The problem is, I get these linker errors when I try to run or build my program: Error 1 error LNK2019: unresolved external symbol _glfwInit referenced in function _main C:\Codex Interactive\Projects\OGLTest\OGLTest\test.obj OGLTest Error 2 error LNK2019: unresolved external symbol _glfwTerminate referenced in function _main C:\Codex Interactive\Projects\OGLTest\OGLTest\test.obj OGLTest Error 3 error LNK2019: unresolved external symbol _glfwSetErrorCallback referenced in function _main C:\Codex Interactive\Projects\OGLTest\OGLTest\test.obj OGLTest and 10 other LNK2019 errors, all talking about some glfw method, as well as: Error 14 error LNK1120: 13 unresolved externals C:\Codex Interactive\Projects\OGLTest\Debug\OGLTest.exe 1 1 OGLTest at the very bottom of the error list. I've looked up most of these errors on their own, and the solutions that I find either do nothing to solve the problem, or are people commenting on how dumb people are for not being about to solve this linker problem. Any assistance to solve these errors would be greatly appreciated. Info: I built GLFW3 on Cmake for Visual Studio 11, 32 bit and 64 bit, and both threw the same errors. The only extra libraries I linked were opengl32.lib, glu32.lib, and glfw3.lib Here is the test code (from GLFW3's latest tutorial): Code

  Read the article

• Using an Apt Repository for Paid Software Updates

  - by Scott Warren

  I'm trying to determine a way to distribute software updates for a hosted/on-site web application that may have weekly and/or monthly updates. I don't want the customers who use the on-site product to have to worry about updating it manually I just want it to download and install automatically ala Google Chrome. I'm planning on providing an OVF file with Ubuntu and the software installed and configured. My first thought on how to distributed software is to create six Apt repositories/channels (not sure which would be better at this point) that will be accessed through SSH using keys so if a customer doesn't renew their subscription we can disable their account: Beta - Used internally on test data to check the package for major defects. Internal - Used internally on live data to check the package for defects (dog fooding stage). External 1 - Deployed to 1% of our user base (randomly selected) to check for defects. External 9 - Deployed to 9% of our user base (ramdonly selected) to check for defects. External 90 - Deployed to the remaining 90% of users. Hosted - Deployed to the hosted environment. It will take a sign off at each stage to move into the next repository in case problems are reported. My questions to the community are: Has anyone tried something like this before? Can anyone see a downside to this type of a procedure? Is there a better way?

  Read the article

• Using a portable USB monitor in Ubuntu 13.04 (AOC e1649Fwu - DisplayLink)

  Having access to a little bit of IT hardware extravaganza isn't that easy here in Mauritius for exactly two reasons - either it is simply not available or it is expensive like nowhere. Well, by chance I came across an advert by a local hardware supplier and their offer of the week caught my attention - a portable USB monitor. Sounds cool, and the specs are okay as well. It's completely driven via USB 2.0, has a light weight, the dimensions would fit into my laptop bag and the resolution of 1366 x 768 pixels is okay for a second screen. Long story, short ending: I called them and only got to understand that they are out of stock - how convenient! Well, as usual I left some contact details and got the regular 'We call you back' answer. Surprisingly, I didn't receive a phone call as promised and after starting to complain via social media networks they finally came back to me with new units available - and *drum-roll* still the same price tag as promoted (and free delivery on top as one of their employees lives in Flic en Flac). Guess, it was a no-brainer to get at least one unit to fool around with. In worst case it might end up as image frame on the shelf or so... The usual suspects... Ubuntu first! Of course, the packing mentions only Windows or Mac OS as supported operating systems and without hesitation at all, I hooked up the device on my main machine running on Ubuntu 13.04. Result: Blackout... Hm, actually not the situation I was looking for but okay can't be too difficult to get this piece of hardware up and running. Following the output of syslogd (or dmesg if you prefer) the device has been recognised successfully but we got stuck in the initialisation phase. Oct 12 08:17:23 iospc2 kernel: [69818.689137] usb 2-4: new high-speed USB device number 5 using ehci-pciOct 12 08:17:23 iospc2 kernel: [69818.800306] usb 2-4: device descriptor read/64, error -32Oct 12 08:17:24 iospc2 kernel: [69819.043620] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 12 08:17:24 iospc2 kernel: [69819.043630] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 12 08:17:24 iospc2 kernel: [69819.043636] usb 2-4: Product: e1649FwuOct 12 08:17:24 iospc2 kernel: [69819.043642] usb 2-4: Manufacturer: DisplayLinkOct 12 08:17:24 iospc2 kernel: [69819.043647] usb 2-4: SerialNumber: FJBD7HA000778Oct 12 08:17:24 iospc2 kernel: [69819.046073] hid-generic 0003:17E9:4107.0008: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 12 08:17:24 iospc2 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 12 08:17:24 iospc2 mtp-probe: bus: 2, device: 5 was not an MTP deviceOct 12 08:17:30 iospc2 kernel: [69825.411220] [drm] vendor descriptor length:17 data:17 5f 01 00 15 05 00 01 03 00 04Oct 12 08:17:30 iospc2 kernel: [69825.498778] udl 2-4:1.0: fb1: udldrmfb frame buffer deviceOct 12 08:17:30 iospc2 kernel: [69825.498786] [drm] Initialized udl 0.0.1 20120220 on minor 1Oct 12 08:17:30 iospc2 kernel: [69825.498909] usbcore: registered new interface driver udl The device has been recognised as USB device without any question and it is listed properly: # lsusb...Bus 002 Device 005: ID 17e9:4107 DisplayLink ... A quick and dirty research on the net gave me some hints towards the udlfb framebuffer device for USB DisplayLink devices. By default this kernel module is blacklisted $ less /etc/modprobe.d/blacklist-framebuffer.conf | grep udl#blacklist udlblacklist udlfb and it is recommended to load it manually. So, unloading the whole udl stack and giving udlfb a shot: Oct 12 08:22:31 iospc2 kernel: [70126.642809] usbcore: registered new interface driver udlfb But still no reaction on the external display which supposedly should have been on and green. Display okay? Test run on Windows Just to be on the safe side and to exclude any hardware related defects or whatsoever - you never know what happened during delivery. I moved the display to a new position on the opposite side of my laptop, installed the display drivers first in Windows Vista (I know, I know...) as recommended in the manual, and then finally hooked it up on that machine. Tada! Display has been recognised correctly and I have a proper choice between cloning and extending my desktop. Testing whether the display is working properly - using Windows Vista Okay, good to know that there is nothing wrong on the hardware side just software... Back to Ubuntu - Kernel too old Some more research on Google and various hits recommend that the original displaylink driver has been merged into the recent kernel development and one should manually upgrade the kernel image (and both header) packages for Ubuntu. At least kernel 3.9 or higher would be necessary, and so I went out to this URL: http://kernel.ubuntu.com/~kernel-ppa/mainline/ and I downloaded all the good stuff from the v3.9-raring directory. The installation itself is easy going via dpkg: $ sudo dpkg -i linux-image-3.9.0-030900-generic_3.9.0-030900.201304291257_amd64.deb$ sudo dpkg -i linux-headers-3.9.0-030900_3.9.0-030900.201304291257_all.deb$ sudo dpkg -i linux-headers-3.9.0-030900-generic_3.9.0-030900.201304291257_amd64.deb As with any kernel upgrades it is necessary to restart the system in order to use the new one. Said and done: $ uname -r3.9.0-030900-generic And now connecting the external display gives me the following output in /var/log/syslog: Oct 12 17:51:36 iospc2 kernel: [ 2314.984293] usb 2-4: new high-speed USB device number 6 using ehci-pciOct 12 17:51:36 iospc2 kernel: [ 2315.096257] usb 2-4: device descriptor read/64, error -32Oct 12 17:51:36 iospc2 kernel: [ 2315.337105] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 12 17:51:36 iospc2 kernel: [ 2315.337115] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 12 17:51:36 iospc2 kernel: [ 2315.337122] usb 2-4: Product: e1649FwuOct 12 17:51:36 iospc2 kernel: [ 2315.337127] usb 2-4: Manufacturer: DisplayLinkOct 12 17:51:36 iospc2 kernel: [ 2315.337132] usb 2-4: SerialNumber: FJBD7HA000778Oct 12 17:51:36 iospc2 kernel: [ 2315.338292] udlfb: DisplayLink e1649Fwu - serial #FJBD7HA000778Oct 12 17:51:36 iospc2 kernel: [ 2315.338299] udlfb: vid_17e9&pid_4107&rev_0129 driver's dlfb_data struct at ffff880117e59000Oct 12 17:51:36 iospc2 kernel: [ 2315.338303] udlfb: console enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338306] udlfb: fb_defio enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338309] udlfb: shadow enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338468] udlfb: vendor descriptor length:17 data:17 5f 01 0015 05 00 01 03 00 04Oct 12 17:51:36 iospc2 kernel: [ 2315.338473] udlfb: DL chip limited to 1500000 pixel modesOct 12 17:51:36 iospc2 kernel: [ 2315.338565] udlfb: allocated 4 65024 byte urbsOct 12 17:51:36 iospc2 kernel: [ 2315.343592] hid-generic 0003:17E9:4107.0009: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 12 17:51:36 iospc2 mtp-probe: checking bus 2, device 6: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 12 17:51:36 iospc2 mtp-probe: bus: 2, device: 6 was not an MTP deviceOct 12 17:51:36 iospc2 kernel: [ 2315.426583] udlfb: 1366x768 @ 59 Hz valid modeOct 12 17:51:36 iospc2 kernel: [ 2315.426589] udlfb: Reallocating framebuffer. Addresses will change!Oct 12 17:51:36 iospc2 kernel: [ 2315.428338] udlfb: 1366x768 @ 59 Hz valid modeOct 12 17:51:36 iospc2 kernel: [ 2315.428343] udlfb: set_par mode 1366x768Oct 12 17:51:36 iospc2 kernel: [ 2315.430620] udlfb: DisplayLink USB device /dev/fb1 attached. 1366x768 resolution. Using 4104K framebuffer memory Okay, that's looks more promising but still only blackout on the external screen... And yes, due to my previous modifications I swapped the blacklisted kernel modules: $ less /etc/modprobe.d/blacklist-framebuffer.conf | grep udlblacklist udl#blacklist udlfb Silly me! Okay, back to the original situation in which udl is allowed and udlfb blacklisted. Now, the logging looks similar to this and the screen shows those maroon-brown and azure-blue horizontal bars as described on other online resources. Oct 15 21:27:23 iospc2 kernel: [80934.308238] usb 2-4: new high-speed USB device number 5 using ehci-pciOct 15 21:27:23 iospc2 kernel: [80934.420244] usb 2-4: device descriptor read/64, error -32Oct 15 21:27:24 iospc2 kernel: [80934.660822] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 15 21:27:24 iospc2 kernel: [80934.660832] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 15 21:27:24 iospc2 kernel: [80934.660838] usb 2-4: Product: e1649FwuOct 15 21:27:24 iospc2 kernel: [80934.660844] usb 2-4: Manufacturer: DisplayLinkOct 15 21:27:24 iospc2 kernel: [80934.660850] usb 2-4: SerialNumber: FJBD7HA000778Oct 15 21:27:24 iospc2 kernel: [80934.663391] hid-generic 0003:17E9:4107.0008: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 15 21:27:24 iospc2 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 15 21:27:24 iospc2 mtp-probe: bus: 2, device: 5 was not an MTP deviceOct 15 21:27:25 iospc2 kernel: [80935.742407] [drm] vendor descriptor length:17 data:17 5f 01 00 15 05 00 01 03 00 04Oct 15 21:27:25 iospc2 kernel: [80935.834403] udl 2-4:1.0: fb1: udldrmfb frame buffer deviceOct 15 21:27:25 iospc2 kernel: [80935.834416] [drm] Initialized udl 0.0.1 20120220 on minor 1Oct 15 21:27:25 iospc2 kernel: [80935.836389] usbcore: registered new interface driver udlOct 15 21:27:25 iospc2 kernel: [80936.021458] [drm] write mode info 153 Next, it's time to enable the display for our needs... This can be done either via UI or console, just as you'd prefer it. Adding the external USB display under Linux isn't an issue after all... Settings Manager => Display Personally, I like the console. With the help of xrandr we get the screen identifier first $ xrandrScreen 0: minimum 320 x 200, current 3200 x 1080, maximum 32767 x 32767LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm...DVI-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm   1366x768       60.0*+ and then give it the usual shot with auto-configuration. Let the system decide what's best for your hardware... $ xrandr --output DVI-0 --off$ xrandr --output DVI-0 --auto And there we go... Cloned output of main display: New kernel, new display... The external USB display works out-of-the-box with a Linux kernel > 3.9.0. Despite of a good number of resources it is absolutely not necessary to create a Device or Screen section in one of Xorg.conf files. This information belongs to the past and is not valid on kernel 3.9 or higher. Same hardware but Windows 8 Of course, I wanted to know how the latest incarnation from Redmond would handle the new hardware... Flawless! Most interesting aspect here: I did not use the driver installation medium on purpose. And I was right... not too long afterwards a dialog with the EULA of DisplayLink appeared on the main screen. And after confirmation of same it took some more seconds and the external USB monitor was ready to rumble. Well, and not only that one... but see for yourself. This time Windows 8 was the easiest solution after all. Resume I can highly recommend this type of hardware to anyone asking me. Although, it's dimensions are 15.6" it is actually lighter than my Samsung Galaxy Tab 10.1 and it still fits into my laptop bag without any issues. From now on... no more single screen while developing software on the road!

  Read the article

• Speaking at SPTechCon Boston 2012

  - by Brian Jackett

  I will be speaking at SPTechCon Boston 2012.  This will be my 3rd time speaking at SPTechCon and 4th time attending.  The conference has steadily been growing over the past few years and is one of the biggest non-Microsoft run conferences for SharePoint in the US.  I’ll be presenting two topics which I have given before but this time around with some updated content.  Registration is currently open and you can save $200 (on top of the current early bird discount of $400) by using the code "JACKETT” during registration.  I highly recommend joining for valuable learning and networking.   Where: SPTechCon Boston 2012 Title: PowerShell for the SharePoint 2010 Developer Audience and Level: Developer, Intermediate Abstract: PowerShell is not just for SharePoint 2010 administrators. Developers also get access to a wide range of functionality with PowerShell. In this session we will dive into using PowerShell with the .Net framework, web services, and native SharePoint commandlets. We will also cover some of the more intermediate to advanced techniques available within PowerShell that will improve your work efficiency. Not only will you learn how to automate your work but also learn ways to prototype solutions faster. This session is targeted to developers and assumes a basic familiarity with PowerShell. Slides and Code download: coming soon   Title: Integrating Line-of-Business Applications with SharePoint 2010 Audience and Level: Developer, Intermediate Abstract: One of the biggest value-adding enhancements in SharePoint 2010 is the Business Connectivity Services (BCS). In this session, we will overview the BCS, demonstrate connecting line-of-business applications and external systems to SharePoint through external content types, and walk through surfacing that data with external lists. This session is targeted at developers. No prior experience with the BCS is required, but a basic understanding of SharePoint Designer 2010 and SharePoint solutions is suggested. Slides and Code download: coming soon         -Frog Out

  Read the article

• Using an Apt Repository for Paid Software Updates

  - by Scott Warren

  I'm trying to determine a way to distribute software updates for a hosted/on-site web application that may have weekly and/or monthly updates. I don't want the customers who use the on-site product to have to worry about updating it manually I just want it to download and install automatically ala Google Chrome. I'm planning on providing an OVF file with Ubuntu and the software installed and configured. My first thought on how to distributed software is to create six Apt repositories/channels (not sure which would be better at this point) that will be accessed through SSH using keys so if a customer doesn't renew their subscription we can disable their account: Beta - Used internally on test data to check the package for major defects. Internal - Used internally on live data to check the package for defects (dog fooding stage). External 1 - Deployed to 1% of our user base (randomly selected) to check for defects. External 9 - Deployed to 9% of our user base (randomly selected) to check for defects. External 90 - Deployed to the remaining 90% of users. Hosted - Deployed to the hosted environment. It will take a sign off at each stage to move into the next repository in case problems are reported. My questions to the community are: Has anyone tried something like this before? Can anyone see a downside to this type of a procedure? Is there a better way?

  Read the article

• dual monitors and unity - ati radeon cards

  - by michiel

  I have a vaio laptop with an ATI Radeon video card and an external screen. I used to run dual monitors on Ubuntu 10.10 fine, but recently decided to upgrade to 11.10 via 11.04 I don't think it's the video card or the fglrx driver. It seems to be unity. When I start up, the laptop screen is normal and the external screen is all white, although I can move my mouse over it. However, the cursor becomes the big X that used to be cursor of the first versions of Xwindows. I can right click on it, and it brings up the context menu for the desktop. And then, all of a sudden, it shows my desktop background. I can continue to move my mouse over the external screen, and now the cursor is normal (little white arrow). But I can't do anything any longer (not even the context menu as before), and trying to drag a window to it (which always worked on 10.10) doesn't work. I actually really like unity. It gives me the most our of my desktop, and uses all space available, which is great. But how can I get my second screen back? I tried unity 2D, but the result is the same. Edit: I think I stumbled on this bug: https://bugs.launchpad.net/ubuntu/+source/nvidia-settings/+bug/882143

  Read the article

• Getting "Unable to find a medium containing a live file system" when installing 10.10

  - by Krastin Konstantinov

  I got this error while trying to install ubuntu 10.10 from a bootable USB stick on to Sony Vaio P series laptop. The disk boots into the language and installation type screen. After that it goes through the splash and pulls up this error: BusyBox v1.13.3 (Ubuntu 1:1.13.3-ubuntu11) built in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Unable to find a medium containing a live file system After getting this error the installation fails to start. I have used the same USB stick on some other laptops and the installation started as usual. Any help will be appreciated. My installation is i386 and my machine is Vaio P VGN-P610. I've tried every possible thing: Bios: [enable boot external] Boot order: [external] [hard drive] [network boot] Tried 2 different USB drives Tried 2 different external CD drives Tried 6 different downloads of both the desktop and netbook remix. All downloads were checked with MD5SUM. Ubuntu Desktop 9.10 installs properly in every version and from every source. Getting reaaaally frustrated.

  Read the article

• Raspberry Pi, Time Capsule Progress

  - by Richard Jones

  So by way of an update. I thought all was good with my Raspberry Pi, Debian and Netatalk Apple Time Capsule Clone. However something very strange going on. Although I could backup my Mac's + PC's fine to Raspberry Pi with external USB HD; strangely with RPI running, I couldn't use AirPlay. I found myself unable to play anything from Mac to Apple TV. So after lots of trying to make this work, I about turned and finally went out and got myself a 2TB Apple Time Capsule. More cash than I would want to spend on anything like this, but Apple you got me. I would like to offer a top tip, which maybe goes a small way to justifying silly expenditure... You can easily add a USB HD to any Time Capsule. I've just added a 3 TB external USB HD, giving me a 5 TB of total backup grunt. 3 TB External USB HD, was peanuts by comparison to Apple kit. So all working, its all solid as you'd expect.Apple 2, maybe me .5. But strong, solid backups now happening, without hassle (but a bit of a credit card bill to follow)

  Read the article

• Hyper-V Manager version 6.2, an experience in virtual switch setup

  - by Kevin Shyr

  The version number of Hyper-V manager is 6.2.9200.16384   This is what came with my Windows 8 work laptop (by enabling Windows features) The blogs I read indicated that I need an external switch for my guest OS to access internet, and an internal one for them to share folder with my Host OS.  I proceeded to create an external virtual switch, and here is the screenshot. After setting up the network adapters on the guest OS, I peeked into host OS networking, and saw that Network Bridge was already created.  GREAT!  So I fired up my guest OS and darn, no internet.  Then I noticed that my host internet was gone, too.  I looked further and found that even though I have a network bridge, no connection has the status "Bridged"Once I removed the bridge (by removing individual connection from the bridge, I know, weird, since none of them say "Bridged" in status)  I re-selected the connection that I want and add them to the bridge to create a new network bridge.  Once my wireless connection status shows "Bridged", I was able to get to internet from my guest OS.Two things I noticed after I got internet for everyone ( my host and guest OS):My network adapters in the host OS no longer shows "Bridged", but everyone can still get to the internetThe virtual switch that I set up for "External" is now showing to be "Internal", and I was able to create shared folder between host and guest OS.  This means I didn't have to create the other "Internal" virtual switch.

  Read the article

• tdd is about design not verification what does it concretely mean?

  - by sigo

  I've been wondering about this. What do we exactly mean by design and verification. Should I just apply tdd to make sure my code is SOLID and not check is correct external behaviour ? Should I use Bdd for the correct behaviour part ? Where I get confused also is regarding TDD code katas, to me they looked like more about verification than design... shouldn't they be called bdd katas instead of tdd katas? I reckon that for example uncle bob bowling kata leads in the end to a simple and nice internal design but I felt that most of the process was more around vérification than design. Design seemed to be a side effect of testing incrementally the external behaviour. I didnt feel so much that we were focusing most of our efforts on design but more on vérification. While normally we are told the contrary, that in TDD, verification is a side effect, design is the main purpose. So my question is what should i focus exactly on when i do tdd: SOLID, external Api usability, what else...? And how can I do that without being focused on verification ? What do you guys focus your energy on when you are practicing TDD ?

  Read the article

• Windows Defender Update KB915597 (Definition 1.135.415.0)? Killed My Live Discs

  - by user88311

  Here's my problem, for those willing to read for about 2 minutes here's the entire story, http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/bsod-after-windows-defender-update-kb915597/a4b5fca3-0274-47b4-97c4-61b34c4c4599, for those who want the short version here's what happened. After windows update automatically updated windows defender to kb915597, my computer starting getting bsods on shut down and start up and started experiencing problems withe the usb ports. So I decided to go to the microsoft answers site for help, I know that was probably my first mistake, so I followed their advice and they turned my computer into a large paper weight. Luckily I make physical backups of my c drive every few months and I have one from back in july, so I figured I'd boot up a ubuntu live disc, copy all my files from the past 2 months to a external drive and just copy the backup back to the c drive, that's where I ran into this problem. When I put in either a ubuntu or kubuntu disc, everything goes well, until it finishes the loading bar then when the OS would presumably start up, the computer resets, I've tried with ubuntu, kubuntu and gparted, and only gparted is able to get to the point where it starts up, but even then when I try to access the internet from it, the computer resets, and when I tried to copy the entire C drive partition to a blank external I wasn't able to. So I figured somehow maybe the C drive had something to do with it, so I unplugged the C drive so my computer was just a 2.8 ghz processor and 2 gigs of ram, should have had no problem starting a live disc but the problem still continues. After doing some googling around I've found whenever windows gets a update with the title KB915597 it's pretty much the kill switch for windows, I've tried contacting microsoft tech support and even managed to directly contact a software engineer but as soon as I mention KB915597 they all just blew me off. I hope anybody who reads this has any idea how to fix this, I'm going to attempt to install ubuntu or kubuntu to a external drive using the same computer and see what happens now.

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >