Search Results

Search found 9688 results on 388 pages for 'external hdd'.

Page 117/388 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• SMART: DISK FAILURE IS IMMINENT (under 24 hours?)

  - by flix

  I have on my hard drive 2 OSes: Ubuntu 12.04 and Windows Vista( I keep it just because of school). Everything was OK on both OSes,but one day on Ubuntu I was getting awkward noises from my notebooks's hard drive and then everything stops and I couldn't do anything. On Windows everything was ok. Everytime I boot on Ubuntu I can get 5 minutes of normal run, without problems. After that the hard drive sounds crazy and nothing works. I could run S.M.A.R.T tests from a older Ubuntu CD (10.04) from the GUI(Disk Utility, or something like that and from terminal). From the GUI I got that the DISK FAILURE IS IMMINENT and I have ~700 bad blocks(or broken blocks, I had that test I while ago) on my HDD. From the terminal ( I don't remember if it was fsck or a SMART test command) I got that the HDD will fail in under 24 hours. Since then it passed 2-3 weeks. I've tried "badblocks" but after 10 hours it was still running and I had to stop it. Now I have to use cygwin and other alternatives for my linux apps on Windows. PLEASE HELP!!! How can I separate the bad blocks from Ubuntu so it wouldn't use them?

  Read the article

• Proof Identify stolen computer getting computer identification info from Launchpad bugs and comparing

  - by Kangarooo

  I sold my old laptop to neighbours and it was stolen from them. Well i think i have found thief so i want to check his computer id and compare it to my old Launchpad bugs id. How in Launchpad i can find from my bugs: Motherboard HDD Somthing else that can help identify it Maybe how to recover or find some overwritten files (couse now there is windows) I found in Launchpad one my bugs has LSPCI autogenerated from bug 682846 https://launchpadlibrarian.net/70611231/Lspci.txt but i dont see any id that can be used to identify specificly my comp. This can be used to identify many same models. Or i missed something in there? And what commands should i use to get all identification on that comp in one go fast? Just lspci? How to get same lspci as it is in that Launchpad link? Now testing laspci on my computer i dont get so much info. Also im now doing a search in my external hdd where i have many backups and maybe i have there result from lspci. So what containing keywords would help doing search with for small lspci and full reports ive done? I might have done sudo lshw somefilename

  Read the article

• SMART says disk failure is imminent due to bad blocks, what do I need to do?

  - by flix

  I have on my hard drive 2 OSes: Ubuntu 12.04 and Windows Vista (I keep it just because of school). Everything was OK on both OSes, but one day on Ubuntu I was getting awkward noises from my notebooks' hard drive and then everything stopped and I couldn't do anything. On Windows everything was OK. Every time I boot Ubuntu I can get 5 minutes normal run time, without problems. After that the hard drive sounds crazy and nothing works. I could run S.M.A.R.T tests from a older Ubuntu CD (10.04) from the GUI (Disk Utility, or something like that and from terminal). From the GUI, I got that the DISK FAILURE IS IMMINENT and I have ~700 bad blocks (or broken blocks, I had that test I while ago) on my HDD. From the terminal (I don't remember if it was fsck or a SMART test command) I got that the HDD will fail in under 24 hours. Since then it passed 2-3 weeks. I've tried "badblocks" but after 10 hours it was still running and I had to stop it. Now I have to use cygwin and other alternatives for my Linux apps on Windows. How can I separate the bad blocks from Ubuntu so it wouldn't use them? Please help.

  Read the article

• Installing Xubuntu alongside with UEFI

  - by Geo

  For the past week and a half I have been trying to figure out how to install Xubuntu 13.10 alongside the Windows 7 install I have on my laptop (ASUS X501A with UEFI) and I'm pretty much at my wit's end. Could someone point me to set of thorough instructions on installing Xubuntu (or any of the Ubuntu derivatives) on a HDD under UEFI alongside Windows 7 64-bit Home Premium? Preferably one that also covers GRUB/bootloader problems that come afterwards. A few additional details: Motherboard does have UEFI. I've disabled Secure Boot and Fast Boot. Launch CSM is enabled and the platform keys are not installed (these settings allow me to at least boot Windows 7). I set the HDD's partition table to GPT through GParted before I installed Windows. I'm installing from a bootable USB that has been created through a tool called Rufus with the GPT partition scheme for UEFI computers option, otherwise I've left it at default. I am able to boot into Xubuntu in UEFI mode, but I'd much rather be able to see the option: Install Xubuntu Alongside Windows 7 (or however it's phrased), Xubuntu seems to be unable to recognize that Windows 7 is installed. I do have access to a bootable USB stick containing GParted though Xubuntu seems to come preinstalled with it. If there's anything else that might be of help, please let me know.

  Read the article

• Windows 7 and Ubuntu Boot/Corruption Problems

  - by Kiraisuki

  I searched around, but I couldn't find the answer to why Windows 7 Ultimate 64x and Ubuntu 12.04 LTS 64x could'nt live together happily on my Asus G1s-X1 laptop. I had Windows 7 Ultimate 64x installed on the laptop when I bought it (bought it used, it comes with Vista new) and I wanted to try out Ubuntu and see what all the hype about the free OS was. I installed Ubuntu on an external 80GB iomega HDD with Windows 7 on my main drive. They both work fine for about 2-3 weeks, until Ubuntu suddenly is unable to boot. A few days after Ubuntu fails, Windows corrupts majorly (winload.exe, ntkrnlpa.exe, and various others corrupt randomly) and Windows Recovery Environment is completely useless. Booting to a live USB with Ubuntu and trying to reinstall it fails, and trying to wipe the main drive and install it there fails as well (something about my graphics card.) I managed to get Windows 7 Ultimate 64x back up and running (after many disk formats) but now I am left with a broken (and invisible) Ubuntu installation on the external drive. Is there any way to get the broken and non-bootable Ubuntu installation off the HDD without damaging or erasing the many files and programs installed and stored on the 80GB drive?

  Read the article

• Huwawei E220 broadband dongle not working

  - by Roshnal

  The problem is, I have used Ubuntu from 6.10 upto 11.10. And upto 11.04 I used my same USB 3G dongle to connect to broadband and it worked fine. But 2 days ago I upgraded to Ubuntu 11.10 and broadband is not working. It detects my dongle and creates a connection without a problem, but when connecting it just keeps on and on for a long time and then say I'm offline. So I did a clean install and the same thing occurred. But I also have a netbook and its got Ubuntu 11.10. I tried using the same dongle for internet on that netbook and it worked fine without any issues. But this isn't a problem with my USB port on my main machine or something like that because I'm also using Windows on my main machine (dual-boot) and its working fine. My hardware: Main computer (one that I'm trying to connect): 2.8GHz dual core Intel 2GB RAM 500GB Sata II HDD 384MB Video Memory (Intel G31/G33 chipset) Ubuntu 11.10 (32bit) My NetBook (broadband working fine): 1.6GHz Intel Atom (dual core) 1GB DDR3 RAM 250GB HDD 128MB Video Memory (Intel something-I-can't-remember) Ubuntu 11.10 (32bit) My dongle is a Huawei E220 and ISP is Dialog GSM (I'm in Sri Lanka) So any idea why this is? I really love Ubuntu and this is bugging me off.. Any help greatly appreciated. Regards, Roshnal

  Read the article

• Why is LSHW Only listing one of my two HDDs?

  - by Mark

  I have a 120GB HDD and a 1TB HDD in the system. I installed Ubuntu Server using LVM on the 120GB. After installation I added the 1TB to the existing volume group and added 10GB to /home as a test. My understanding is that lshw is supposed to list hardware. What's the difference here? mark@server:~$ sudo lshw -short -c disk H/W path Device Class Description ========================================================= /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/1/0.0.0 /dev/sdc disk SCSI Disk /0/1/0.0.1 /dev/sdd disk SCSI Disk /0/1/0.0.2 /dev/sde disk SCSI Disk /0/1/0.0.3 /dev/sdf disk SCSI Disk The 1TB only shows up as a volume, not as a disk. mark@server:~$ sudo lshw -short .... /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/0/1 /dev/sda1 volume 476MiB Linux filesystem partition /0/100/1f.2/0/2 /dev/sda2 volume 111GiB Linux LVM Physical Volume partition /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/100/1f.2/0.0.0 /dev/sdb volume 931GiB WDC WD1001FALS-0 Thanks, Mark

  Read the article

• Dual Booting Windows 7 and Ubuntu 12.04. Partition Sizes?

  - by John F.

  I'm about to reinstall Windows, so I thought that I'd try Ubuntu out on a partition just for fun. My question is, how large should my partitions be for each of them? I know this various depending on what you use, so i'll give you a general idea of what I have, and what I have in mind. I'm currently running: Windows 7 Professional (64bit) RAM: 4GB CPU: 2.5Ghz Quad Core processor HDD: 500GB GPU: 1GB Nvidia GeForce I have around 130GB in Steam games, and some heavier applications like Photoshop CS6, Sony Vegas Pro 11. But other Applications I use are: Chrome Skype Dxtory Fraps OpenOffice BitTorrent and other assorted smaller programs. So, I was thinking that I would give my Windows partition about 150-200GB, my Ubuntu Partition around 20GB, and the rest to shared storage. I'm not really sure if I'd need more or less on Ubuntu, because I've never used it and I'm not really sure what kind of apps i'd be using over there. This would also be a clean install, so I'd be wiping my HDD, creating the Partitions in GParted, then installing Windows with Ubuntu following that. Any critique you could give me? Maybe explanations to what the /root, /boot and /home partitions I hear are about? Thanks in advanced if you actually read this lengthy thing! Any help is appreciated. (x

  Read the article

• All files gone after running fsck. How can I recover my files?

  - by cinlung

  I am a newbie in Linux. So this is my story I installed Ubuntu server 10.04lts. It worked great for many months, until today i decided to run fsck on the system partition and although it warned me, I kept pressing yes and now it will only boot into grub prompt. So i read some article and tried grub reinstall. But before performing grub reinstall, i decided to run fsck again from Ubuntu 10.04 lts for desktop live CD. The fsck painfully passes, now my drive is recognized as ext4 system and I am able to mount it again. However, all i can see is just boot directory and lost&found. I tried to perform grub reinstalling by doing grup-install stuff, now my grub is still not loading right, my files are missing, and the weird thing is that the amount I found used by boot and lost n found is only 5gb and the amount used in he hdd is 8 gb. So my files must be somewhere in the hdd. Is there any sinple way maybe a windows tool or something yo recover my files? I only need to retrieve my database backup and everything else can go. I am freaking out here. Please help.

  Read the article

• How to start Ubuntu with no working video card?

  - by ViliusK

  I have a laptop with broken video card. It has two operating systems installed - Windows 7 and Ubuntu 10.10 Desktop Edition. It has GRUB to manage which operating system to boot up. Windows is default OS. And Windows fails to boot up without video card. I'm checking with ping to the ports which are shown as used by DHCP in my router. Normal boot of Ubuntu also fails and it restarts after a while. But when I choose (blindly, but checking HDD indicator and by counting button presses when GRUB menu appears) to boot second option of Ubuntu (rescue mode) it starts and I can ping it. But when I try to connect to it through SSH, I'm getting "connection refused" error from putty. I've took out HDD from my laptop already and inserted it to WD Passport case so now I can connect it to other computer to edit configuration files. How can I check if SSH server is working? How to enable it in rescue mode? Or better, how to disable video card to be required while booting Ubuntu in normal mode?

  Read the article

• Dual boot UEFI Windows 7 and Ubuntu 12.04 (both 64 bits). W7 entry doesn't appear in GRUB

  - by Joe

  After trying to install both OS during 2 days, I'm confused and getting mad... I have SSD 128 GB and HDD 500 GB both empty. My laptop is Asus K55VM. BIOS support UEFI. What I have done: Install new SSD (Samsung 830 128GB) Use GParted on liveCD to create new table of partitions (GPT) and create 3 partitions (in the SSD) for different purposes: Partition 1: 80 GB (w7); Partition 2: 30 GB (Ubuntu 12.04 -Just / -); Partition 3: 10 GB unused (for future extesion of the other partitions) Install Windows 7 (with UEFI) in Partition 1. This create: /dev/sda1 - 100 MB for System (UEFI boot I guess) - FAT32 /dev/sda2 - 100 MB aprox. for MSR /dev/sda3 - 79.800 MB aprox. for Windows7 data In this point everything works fine. I have W7. Now I install Ubuntu 12.04 amd64 (with UEFI) as follows: Install / in Partition 2 - /dev/sda4 30 GB ext4, and in the hdd I install /home and swap. I select bootloader in /dev/sda1 (where it's supposed to be the UEFI boot). I install updates and reboot. Problem: Now just appears grub menu with Ubuntu entries and not Windows 7. Alternative solution found: When I turn on laptop, before loading GRUB I press ESC key and appear BIOS boot, so I can select to boot the Windows partition, Ubuntu partition, DVD, USB, etc... but I think is not the best way to boot different OS. I've tried: sudo update-grub2 with no success. What can I do??

  Read the article

• How can I install from a 9.04 live USB/DVD?

  - by bstpierre

  I have a 9.04 (Jaunty) ISO burned to a USB stick; it appears to be a "live DVD". When I boot from it, I get a GRUB menu listing: Ubuntu, with Linux 2.6.35-generic (This matches the system currently installed on the HDD?) Ubuntu, with Linux 2.6.35-generic (recovery mode) Memory test Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1) Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1) Ubuntu 9.04, memtest86+ (on /dev/sda1) When I select Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1), I arrive at the desktop of a 9.04 system. I want to wipe the HDD clean and install 9.04. (Upgrading to something newer is not an option; this version is required by a legacy application.) How can I install from this live USB image? I vaguely remember some incantation that I should be able to use in the booted system, but my google-fu is broken at the moment. I'm comfortable with low-level commands, so if you want to recommend a more hard-core strategy, I'm willing to roll with it without requiring a ton of detail...

  Read the article

• Dual Boot Windows 8 and Ubuntu

  - by Nick

  My laptop has two hard drives, one 320GB HDD and a 30GB SSD. I installed Windows 8 on the HDD and Ubuntu on the SSD. However, after I installed Ubuntu, Windows 8 did not appear on the boot list. I tried boot-repair, but this didn't help.Here is the output of my fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6cd9314a Device Boot Start End Blocks Id System /dev/sda1 * 2048 625139711 312568832 7 HPFS/NTFS/exFAT Disk /dev/sdb: 30.0 GB, 30016659456 bytes 255 heads, 63 sectors/track, 3649 cylinders, total 58626288 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6cd93132 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 207126 102539+ 83 Linux /dev/sdb2 208894 58626047 29208577 5 Extended /dev/sdb5 208896 4112383 1951744 82 Linux swap / Solaris /dev/sdb6 4114432 58626047 27255808 83 Linux Disk /dev/mmcblk0: 3965 MB, 3965190144 bytes 49 heads, 48 sectors/track, 3292 cylinders, total 7744512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009c694 Device Boot Start End Blocks Id System /dev/mmcblk0p1 * 8192 7744511 3868160 b W95 FAT32 I also tried sudo grub-update, but that also did nothing.

  Read the article

• 12.04 doesn't boot anymore after a power failure

  - by Felix

  I'm a Windows user and I have no experience with Linux and Ubuntu. I installed Ubuntu 12.04 on my netbook (Asus 1215B) and everything works fine. Yesterday I ran the "update application" and updated over 120 "things" (I have no idea what exactly). After that I was asked to reboot, and I did. Ubuntu starts again and at the load screen with these 5 dots that normally begin to change color, it freezes. After 20 minutes I took out the battery to try another reboot (yes, not the the best idea), and now nothing happens. I boot from the HDD and I get an Error BOOTMGR is missing. I have important data on the hard drive. Is there an option to get this fixed? Or if not, to at least get the data from the hard drive? Ubuntu 12.04 64-bit Edit: it is ONLY Ubuntu on this Netbook, which uses the whole 500gb HDD as 1 Partition. Filesystem is NTFS. Whole Hardware seems okay. The USB drive which i used to instl the Os was formated in fat32

  Read the article

• Can't boot to Windows 7 after installing Ubuntu 11.10

  - by les02jen17

  Here's what happened: I have 2 HDDs. 1st HDD is partitioned like this: C - Windows 7 D* - Empty drive where I installed Ubuntu E - Personal Files F - Personal Files 2nd HDD is partitioned like this: G - Personal Files *the D partition is originally part of the C partition. I resized it (using Easus Partition Master in Windows) and defragged it prior to installing Ubuntu. I installed Ubuntu by booting to the Ubuntu Secure Remix CD, and chose the D partition to install Ubuntu. I did not create a swap drive, and I mounted the / to the D partition. I didnt know where to mount the others, so I just thought by mounting the / to D, it would be okay. After the long installation, upon rebooting, I can't access Windows AND Ubuntu. I get an infinite bootloop and eventually the choices to boot to Safe Modes, Last Known Good Configuration and Start Windows normally. After failing in all of them, I placed the CD back and ran the Boot Repair. I chose the MBR 1st, it didn't work. I then chose the GRUB 2nd and now I was able to boot to the Ubuntu I installed, but not to my Windows 7! I'm using my newly installed Ubuntu while writing this. I hope you can help me. I did the best I could! Here's the link to the boot repair log: http://paste.ubuntu.com/919354/ Thanks in advance!

  Read the article

• Help! Problem dual boot ubuntu windows8 (can't start ubuntu) [duplicate]

  - by a35

  This question already has an answer here: Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported) 5 answers EDIT: I know that there are many topics about dual boot ubuntu windows8, i have read them, my problem is that i cant boot ubuntu neither from HDD nor from live USB. I know about boot repairing, but how can I use it, If i cant boot ubuntu?? I heard about terrible problems with windows 8-linux dual boot, but I really need ubuntu because of school. I read many tutorials how to install ubuntu next to windows8, but despite that a problem accured. Here is what I have done. I have MSI GE60, windows(64bit) is running on mSATA SSD C drive. HDD is divided to two partitions for windows and I left there 50GB for ubuntu. I downloaded ubuntu 12.04.3desktop-amd64(64bit), created bootable USB using Universal USB Installer (recommended on Ubuntu site). I disabled USB legacy support (that Ubuntu could be installed in EFI mode- I was following instructions on Ubuntu site), and also Secure Boot (windows is now angry with me because I turned it off- when I start windows it informs me I should enable that). I inserted USB rebooted computer and chose install ubuntu, divided free 50GB space to swap(2000MB) and rest as ext4 main storage space for ubuntu. Installation passed normally, Ubuntu then asked me to reboot computer. After reboot windows 8 started. Now I can't start ubuntu. When I restart win8 to uefi there is possibility to boot ubuntu, but when I choose it, it crashes. When I choose try ubunfu from connected USB, nothing happend, still dark screed. What is wrong? Can you help me? I am in hurry to do it because of school. Thanks.

  Read the article

• Black Screen (but with cursor) after wake-up from suspend to RAM

  - by Naseschwarz

  [Lenovo Thinkpad X60] After upgrading to 12.04, first thing I did was get suspend to HDD back, because I don't use my battery a lot. So I did that. After a while (about a week, I upgraded on release, not beta), maybe a week or so, I started getting black screens from time to time after waking it up from suspend to RAM. I never got that problem with suspend to HDD. As it only happens sometimes, I can't reproduce it o.O Sometimes it doesn't happen for a week (daily use, approx 2-6 wake-ups a day), then every single time. The precise symptoms are as follows: normally I got a black screen with my cursor on it, which can be moved, no problems there. I can't interact with the system in any way except for turning it off on the 1/0 button... the weird thing is, the cursor seems to react to what I had opened when going into suspend to RAM, so for instance one day I had writer open and then my cursor was a "I" for most of the screen. I only get this in 12.04, never had any problems with this in 9.04-11.10. Any ideas? Big thx in advance!

  Read the article

• Silverlight 4 OOB application access HTML DOM of the page in WebBrowser control

  - by Mike Weerasinghe

  Does anybody know if it is possible to access and manipulate an element in the html page that is rendered by the Silverlight 4 WebBrowser control. The scenario is like this. The user launches a Silverlight OOB application with elevated trust. The user manipulates some data in the application but must submit part of the data to an external web site. If I open the external site in a WebBrowser control, is there any way I can assist the user by pre filling some information in the external sites' web form via programmatic access to the DOM?

  Read the article

• How To Run integrational Tests

  - by Vladimir

  In our project we have a plenty of Unit Tests. They help to keep project rather well-tested. Besides them we have a set of tests which are unit tests, but depends on some kind of external resource. We call them external tests. They can access web-service sometimes or similar. While unit tests is easy to run the integrational tests couldn't pass sometimes - for example due to timeout error. Also these tests can take too much time to run. Currently we keep integration/external unit tests just to run them when developing corresponding functionality. For plain unit tests we use TeamCIty for continuous integration. How do you run the integration unit tests and when do you run them?

  Read the article

• Function pointer arrays in Fortran

  - by Eduardo Dobay

  I can create function pointers in Fortran 90, with code like real, external :: f and then use f as an argument to another function/subroutine. But what if I want an array of function pointers? In C I would just do double (*f[])(int); to create an array of functions returning double and taking an integer argument. I tried the most obvious, real, external, dimension(3) :: f but gfortran doesn't let me mix EXTERNAL and DIMENSION. Is there any way to do what I want? (The context for this is a program for solving a system of differential equations, so I could input the equations without having a million parameters in my subroutines.)

  Read the article

• Singleton code linker errors in vc 9.0. Runs fine in linux compiled with gcc

  - by user306560

  I have a simple logger that is implemented as a singleton. It works like i want when I compile and run it with g++ in linux but when I compile in Visual Studio 9.0 with vc++ I get the following errors. Is there a way to fix this? I don't mind changing the logger class around, but I would like to avoid changing how it is called. 1>Linking... 1>loggerTest.obj : error LNK2005: "public: static class Logger * __cdecl Logger::getInstance(void)" (?getInstance@Logger@@SAPAV1@XZ) already defined in Logger.obj 1>loggerTest.obj : error LNK2005: "public: void __thiscall Logger::log(class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > const &)" (?log@Logger@@QAEXABV?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@@Z) already defined in Logger.obj 1>loggerTest.obj : error LNK2005: "public: void __thiscall Logger::closeLog(void)" (?closeLog@Logger@@QAEXXZ) already defined in Logger.obj 1>loggerTest.obj : error LNK2005: "private: static class Logger * Logger::_instance" (?_instance@Logger@@0PAV1@A) already defined in Logger.obj 1>Logger.obj : error LNK2001: unresolved external symbol "private: static class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > Logger::_path" (?_path@Logger@@0V?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@A) 1>loggerTest.obj : error LNK2001: unresolved external symbol "private: static class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > Logger::_path" (?_path@Logger@@0V?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@A) 1>Logger.obj : error LNK2001: unresolved external symbol "private: static class boost::mutex Logger::_mutex" (?_mutex@Logger@@0Vmutex@boost@@A) 1>loggerTest.obj : error LNK2001: unresolved external symbol "private: static class boost::mutex Logger::_mutex" (?_mutex@Logger@@0Vmutex@boost@@A) 1>Logger.obj : error LNK2001: unresolved external symbol "private: static class std::basic_ofstream<char,struct std::char_traits<char> > Logger::_log" (?_log@Logger@@0V?$basic_ofstream@DU?$char_traits@D@std@@@std@@A) 1>loggerTest.obj : error LNK2001: unresolved external symbol "private: static class std::basic_ofstream<char,struct std::char_traits<char> > Logger::_log" (?_log@Logger@@0V?$basic_ofstream@DU?$char_traits@D@std@@@std@@A) The code, three files Logger.h Logger.cpp test.cpp #ifndef __LOGGER_CPP__ #define __LOGGER_CPP__ #include "Logger.h" Logger* Logger::_instance = 0; //string Logger::_path = "log"; //ofstream Logger::_log; //boost::mutex Logger::_mutex; Logger* Logger::getInstance(){ { boost::mutex::scoped_lock lock(_mutex); if(_instance == 0) { _instance = new Logger; _path = "log"; } } //mutex return _instance; } void Logger::log(const std::string& msg){ { boost::mutex::scoped_lock lock(_mutex); if(!_log.is_open()){ _log.open(_path.c_str()); } if(_log.is_open()){ _log << msg.c_str() << std::endl; } } } void Logger::closeLog(){ Logger::_log.close(); } #endif ` ... #ifndef __LOGGER_H__ #define __LOGGER_H__ #include <iostream> #include <string> #include <fstream> #include <boost/thread/mutex.hpp> #include <boost/thread.hpp> using namespace std; class Logger { public: static Logger* getInstance(); void log(const std::string& msg); void closeLog(); protected: Logger(){} private: static Logger* _instance; static string _path; static bool _logOpen; static ofstream _log; static boost::mutex _mutex; //check mutable }; #endif test.cpp ` #include <iostream> #include "Logger.cpp" using namespace std; int main(int argc, char *argv[]) { Logger* log = Logger::getInstance(); log->log("hello world\n"); return 0; }

  Read the article

• mysql C connector unresolved symbols on Win2k8 but not on XP?

  - by jimmy glick

  I have a visual C++ 2008 express project which compiles fine on Windows XP with mysql C connector 6.0.2. When I copy the project over to a Windows Server 2008 x64 machine, it gets a bunch of linker errors like "unresolved external symbol _mysql_server_end@0" "unresolved external symbol _mysql_close@4" "unresolved external _mysql_real_connect@32". Is the mysql C connector 6.0.2 known to not work with Win Server 2008? (Note, the C connector is installed into the same place on both machines, and since I just copied over the project wholesale, it still has the correct libmysql.lib include. The interesting thing is that the errors I get on XP if I remove the libmysql.lib are not the same errors I'm getting on Win2k8, so that's what makes me think it might be an incompatibility...or maybe it's just because win2k8 is x64 and XP is x86?) Thanks

  Read the article

• How can I programmatically find the IP address/netmask/gateway configured for a specific network dev

  - by Oren S

  Hi I would like to write a piece of code which checks, for each network device (e.g. eth0, lo, master devices) some statistics and configuration data about that device. I could find the statistics data (and most of the configuration data) in /sys/class/net/..., however, I couldn't find any C/C++ API or any entry in procfs/sysfs listing the inet addr, netmask and gateway. Some alternatives I checked: parsing the output from ifconfig/route/some other utilities: I don't want to start a subprocess every time I need to do the inspection. parsing /etc/sysconfig/network-scripts/: will give me only the start-up configuration, and not the current state. Also, since this code is intended for a product in my workplace, where every external library is inspected thoroughly (meaning it will take me forever to add any external library) I prefer solutions which rely on Linux native API and not external libraries. Thanks!

  Read the article

• Scripting window positioning in OS X

  - by Matt Trent

  My primary computing setup is a macbook pro with a large external monitor. I'm looking for a convenient way of moving a number of the windows of open programs from the laptop screen to the external monitor when I plug it in. I've seen a few partial scripts for accomplishing this, but nothing comprehensive. Ideally I'd like to specify the laptop screen location and external monitor location for each window and be able to toggle between them. Is anyone aware of any existing utility or Applscripts that can perform this?

  Read the article

• Why will show() only work for fields that are hidden using inline css?

  - by Chris

  I am hiding an element using inline css, like so: <span class="hidden-nojs" style="display:none">Some text</span> Next I use jQuery to show the element, like so: $(".hidden-nojs").show(); This works great. As soon as I remove the inline css and put display:none on the external css stylesheet for the hidden-nojs class, it stops working. This is what I wrote in the external stylesheet: .hidden-nojs { display: none; } I'm assuming that the external stylesheet loads after the jQuery has already run? This is somewhat annoying as I would like to hide multiple elements with css and would like to avoid using inline css. Why will show() only work for fields that are hidden using inline css? How can I fix this problem?

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >