Search Results

Search found 3775 results on 151 pages for 'higher education'.

Page 110/151 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• Melting plastic around DC-in jack in laptop

  - by Ove

  I recently noticed that the plastic around the DC-in jack of my laptop was warped (melted) a little bit. Since I noticed, I have done some experiments, and saw that the metal tip of the charger heats up very much when I am gaming, or performing CPU-intensive work (it's so hot that i can't hold it between my fingers). When I am using Windows normally (web browsing, music, video), the tip is not hot. I tried using another charger from a compatible laptop, but its metal tip overheated as well, so the problem is not caused by the charger. I have been using this laptop for gaming for 1.5 years and I never had this problem. When gaming I always use a laptop cooler. Dust is not the problem (i cleaned out the dust), and the CPU and GPU temperatures are not higher than when I got the laptop. The only thing that is excessively hot is the charger tip. Because I bought my laptop from the USA, sending it to warranty and back would cost more than the laptop's value, so I need to fix it myself. I have googled around, and I saw that the problem might be the DC-in jack that is located on the motherboard of the laptop. I plan to take the laptop apart and see if it has become loose, and soldering it in place if it has. My questions for you are: Did anyone deal with this problem in the past? Did anyone manage to fix it? Is the DC-in jack the culprit in this case? Or is it possible for the problem to be caused by another part on the motherboard? Is there any way I can check the DC-in jack with a multimeter? What should I measure (resistance, etc)? EDIT: My laptop is a Sager NP5135 (aka Clevo B5130M). I also posted on NBR, including some pictures: link

  Read the article

• 13" MacBook Pro with Win 7 and External VGA gets 640x480

  - by Jim McKeeth

  I have a brand new 13" MacBook Pro - 2.26 GHz and the NVIDIA 9400M Video card. I installed Windows 7 (final) in boot camp and booted up to Windows 7. Installed all the drivers from the Apple disk and it was working great. Then I attached the external VGA adapter (from apple) to connect to a projector and it dropped down at 640x480 resolution. No matter what I did it wouldn't let me change to a higher resolution if the external VGA was connected. Once it disconnects then it goes back to the normal resolution. If I am booted into Snow Leopard it works fine. I tried updating the NVIDIA drivers and it behaved exactly the same. Ultimately I want to get 1024x768 or better resolution when connected to an external display. If it isn't fixable then I am curious if anyone else has seen this, if it is a known issue, and who to contact for support (Apple, Microsoft or NVIDIA?) Update: Just attaching the Mini-DVI to VGA adapter kicks it into 640x480, no projector is required. I tried forcing the display driver from Generic PnP Monitor to one that supported 1024x768 and that didn't work either.

  Read the article

• Using Round Robin DNS on simple VPN setup

  - by dannymcc

  We have two internet connections which are load balanced to share the load between the two. We set this up after one of the internet provider proved to be less than reliable but great speed and latency wise when it is working. We'd rather utilise both connections as much as possible rather than leave one idle until the other drops out. We have a number of remote workers who occasionally need to connect via VPN from their laptops or iPads, we also have a small number of permanent LAN to LAN tunnels running from smaller branches. Originally we only had one internet connection and used one of our static IP addresses for all VPN users. Now that we have two internet connections running all of the time I am trying to make sure that the VPN is available to our team regardless of which connection drops. So my solution is to create two A records for our domain name with a value of vpn. and the two static IP addresses from each peer. Is this a sensible way of achieving this? Should I expect higher latency due to packets being lost if one peer fails and some packets still get routed to it anyway? A brief mockup of the setup I have:

  Read the article

• Four disks - RAID 10 or two mirrored pairs?

  - by ewwhite

  I have this discussion with developers quite often. The context is an application running in Linux that has a medium amount of disk I/O. The servers are HP ProLiant DL3x0 G6 with four disks of equal size @ 15k rpm, backed with a P410 controller and 512MB of battery or flash-based cache. There are two schools of thought here, and I wanted some feedback... 1). I'm of the mind that it makes sense to create an array containing all four disks set up in a RAID 10 (1+0) and partition as necessary. This gives the greatest headroom for growth, has the benefit of leveraging the higher spindle count and better fault-tolerance without degradation. 2). The developers think that it's better to have multiple RAID 1 pairs. One for the OS and one for the application data, citing that the spindle separation would reduce resource contention. However, this limits throughput by halving the number of drives and in this case, the OS doesn't really do much other than regular system logging. Additionally, the fact that we have the battery RAID cache and substantial RAM seems to negate the impact of disk latency... What are your thoughts?

  Read the article

• Reducing video mode switching during Linux boot

  - by Zack

  When I boot up my desktop computer, which only has Linux on it, the video mode and/or console font gets switched four times: When GRUB starts, it switches from 80x25 text to a graphical mode so it can draw a pretty background behind its menu; GRUB then goes back to 80x25 text after I pick something from the menu; When the KMS driver for my video card loads, it switches to a much higher-resolution text mode (I don't know if this is a hardware text mode or not); Finally X starts and it goes graphics and stays that way. I think this last switch does not change the resolution of the video mode, only the graphicalness. I'd like to get rid of as many of these mode switches as possible. Ideally, when GRUB takes over from the BIOS it would go directly to the same high-resolution text mode that the KMS driver selects, and the display would stay in that mode till X starts and brings up graphics. I am under the impression that this is possible by mucking with the kernel command line and/or the GRUB console module load parameters, but I don't know the details. GRUB 1.98+20100706, kernel 2.6.32.15 using Nouveau video drivers. Distro is Debian unstable. Please no answers that involve recompiling anything or cobbling together bleeding-edge kernel/driver combinations, I don't care enough about this to go to that much trouble. EDIT: Tobu suggests setting GRUB_GFXMODE to the full pixel resolution of the monitor, and GRUB_GFXPAYLOAD_LINUX=keep to avoid the mode switch after the menu goes away. This does part of what I want, but winds up being worse overall. There's no mode switch after the menu, but there's still a painfully-slow screen repaint (I should probably just give up on GRUB's gfxmode, it's waaaay too slow at 1920x1200). More seriously, there's now a double mode switch when nouveaufb loads, along with fun-looking error messages in dmesg [ 5.923798] [drm] nouveau 0000:02:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff8801ba5f4600 [ 5.923802] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver [ 5.923821] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 1 ("PFIFO_INTR" message repeats 400+ times) [ 5.925609] Console: switching to colour dummy device 80x25 [ 5.925802] Console: switching to colour frame buffer device 240x75

  Read the article

• Xen PV packet loss

  - by Delphinator

  I'm having some serious issues with packetloss with one of my servers. This server is a somewhat old (P4-era) machine running Debian Squeeze and Xen 4.0. There are two domUs running on it (both also Debian Squeeze), one gateway and a fileserver. Unfortunatly the processor has no virtualization extensions, therefore only PV can be used. While investigating why our network seems to be slower than it should I found some pretty bad packet loss (~25%). After further investigation and several experiments I did a measurment between the dom0 and one of the domUs: Server listening on UDP port 5001 Receiving 1470 byte datagrams UDP buffer size: 110 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to dom0, UDP port 5001 Sending 1470 byte datagrams UDP buffer size: 110 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.2(domU) port 33817 connected with 192.168.1.100(dom0) port 5001 [ 4] local 192.168.1.2(domU) port 5001 connected with 192.168.1.100(dom0) port 48606 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 46.3 MBytes 38.7 Mbits/sec [ 3] Sent 33020 datagrams [ 3] Server Report: [ 3] 0.0-10.0 sec 46.2 MBytes 38.6 Mbits/sec 0.030 ms 89/33019 (0.27%) [ 3] 0.0-10.0 sec 1 datagrams received out-of-order [ 4] 0.0-10.2 sec 43.0 MBytes 35.3 Mbits/sec 13.074 ms 11575/42256 (27%) tl;dr: 27% packet loss from dom0 to domU with 50Mbit UDP packets. Same thing happens from anywhere in the network. The problem gets better for smaller bandwidths (0.047% for 5Mbit) and worse for higher (59% for 200Mbit) ones. I did increase the CPU-weight of the dom0, there is no swapping going on, and actual networking-hardware is not involved. I never expected Xen (or anything related) to drop packets, and I'm completly clueless what to try next.

  Read the article

• Replacing all disks in a non-OS RAID 5 volume

  - by molecule

  Hi all, We currently have a server with 8 x HDD slots. It is a HP DL380G5 with a P400 controller. 2 x HDD are in a RAID 1+0 config and this hosts the OS. 6 x HDD are in a RAID 5 config and holds an Oracle DB. Basically the RAID 5 volume is running out of space and we would like to swap all 6 with higher capacity disks. Excuse my ignorance as I am pretty new to this... I believe we will need to backup the data, delete the RAID volume, insert the new disks, recreate the volume, and restore the data. 2 questions: Do we need to worry about the OS partition or is it completely independent so we can simply take out the 6 and insert 6 new disks and get the controller to recognize the 6 new disks and form a new RAID 5 volume? We should not need to reinstall OS or Oracle correct? Since we are going to restore the data on the volume from another source (our vendor will take care of this) but we would like to keep the existing data on the 6 disks just in case we run into issues and want to fall back, is this possible? Thanks in advance.

  Read the article

• Swap not available on System Monitor

  - by Zaki

  I had a swap partition of 1GB (RAM 1GB, Ubuntu 12.04 lts). Now swap is not shown on System Monitor neither can I hibernate my pc (sudo pm-hibernate). blkid output: /dev/sda1: UUID="B8B4FBB1B4FB706C" TYPE="ntfs" /dev/sda2: UUID="2ea7d608-2d89-4e41-9436-d05cb3ce8871" TYPE="swap" /dev/sda3: UUID="3219d03a-67e4-454b-8ce7-a27831846e35" TYPE="ext4" /dev/sda5: LABEL="Softwares" UUID="AC1CC3301CC2F47C" TYPE="ntfs" /dev/sda6: LABEL="Education" UUID="1E103E6C103E4B53" TYPE="ntfs" /dev/sda7: LABEL="Recreation" UUID="2CC8D181C8D149AA" TYPE="ntfs" /dev/sda8: LABEL="Miscellaneous" UUID="0274D6B174D6A727" TYPE="ntfs" /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=3219d03a-67e4-454b-8ce7-a27831846e35 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=2ea7d608-2d89-4e41-9436-d05cb3ce8871 none swap sw 0 0 free -m total used free shared buffers cached Mem: 991 867 123 0 27 418 -/+ buffers/cache: 421 569 Swap: 0 0 0 cat /proc/swaps Filename Type Size Used Priority fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9f369f36 Device Boot Start End Blocks Id System /dev/sda1 * 63 31471334 15735636 7 HPFS/NTFS/exFAT /dev/sda2 31471616 33470447 999416 82 Linux swap / Solaris /dev/sda3 33472512 62539775 14533632 83 Linux /dev/sda4 62541045 312592769 125025862+ f W95 Ext'd (LBA) /dev/sda5 62541108 125066024 31262458+ 7 HPFS/NTFS/exFAT /dev/sda6 125066088 187591004 31262458+ 7 HPFS/NTFS/exFAT /dev/sda7 187591068 250115984 31262458+ 7 HPFS/NTFS/exFAT /dev/sda8 250116048 312576704 31230328+ 7 HPFS/NTFS/exFAT swapon --all swapon: /dev/sda2: swapon failed: Invalid argument dmesg | grep -A 5 -B 5 -i swap [ 9.487404] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131645 [ 9.487413] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131330 [ 9.487418] EXT4-fs (sda3): 16 orphan inodes deleted [ 9.487420] EXT4-fs (sda3): recovery complete [ 9.578600] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 20.580539] Swap area shorter than signature indicates [ 20.588363] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.619443] udevd[330]: starting version 175 [ 20.649959] lp: driver loaded but no devices found [ 20.662972] [drm] Initialized drm 1.1.0 20060810 [ 20.675515] i915 0000:00:02.0: setting latency timer to 64 -- [ 72.288573] PM: thaw of drv:sr dev:3:0:0:0 complete after 178.143 msecs [ 72.288578] PM: thaw of drv:scsi_device dev:3:0:0:0 complete after 178.136 msecs [ 72.299677] PM: thaw of drv:scsi_device dev:2:0:0:0 complete after 189.270 msecs [ 72.309473] PM: thaw of devices complete after 202.763 msecs [ 72.309668] PM: writing image. [ 72.309670] PM: Cannot find swap device, try swapon -a. [ 72.309699] PM: Cannot get swap writer [ 72.329896] Restarting tasks ... done. [ 72.331777] PM: Basic memory bitmaps freed [ 72.331792] video LNXVIDEO:00: Restoring backlight state [ 72.420048] option1 ttyUSB0: option_instat_callback: error -84 [ 72.804047] option1 ttyUSB0: option_instat_callback: error -84 -- [ 145.960625] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 145.972036] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 172.430508] PPP BSD Compression module registered [ 172.455583] PPP Deflate Compression module registered [ 332.260789] type=1400 audit(1381814763.342:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 1913.030998] Swap area shorter than signature indicates [ 2022.530155] type=1400 audit(1381816453.610:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 4062.729509] Swap area shorter than signature indicates Please help. Thanks in advance. df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 14G 6.1G 7.0G 47% / udev 488M 4.0K 488M 1% /dev tmpfs 199M 868K 198M 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 496M 224K 496M 1% /run/shm

  Read the article

• Debian - starting UFW (Uncomplicated Firewall) before network interfaces are operational

  - by Tomasz Zielinski

  I want to install UFW on Debian Lenny. Everything looks straightforward except that I don't know where to plug UFW startup script so that it configures iptables before hax0rs can break in. I've reviewed runlevel directories and in /etc/rc0.d, /etc/rc6.d and /etc/rcS.d there are items like these: S35networking -> ../init.d/networking S36ifupdown -> ../init.d/ifupdown Runlevel 0 and 6 are for shutdown and reboot so I guess nothing should be changed there, but runlevel S advertises itself (in README) like something for me: The scripts in this directory whose names begin with an 'S' are executed once when booting the system, even when booting directly into single user mode. The following sequence points are defined at this time: * After the S40 scripts have executed, all local file systems are mounted and networking is available. All device drivers have been initialized. (What bothers me is that both rc0/6.d and rcS.d point to the same networking and ifupdown scripts, but after looking at sources I believe those scripts are smart enough to figure out where to start and where to stop networking.) Now, I think that I should plug my /lib/ufw/ufw-init into /etc/rcS.d, with priority higher that the one of ifupdown and networking, i.e. <= 38 for my /etc/rcS.d. Am I right in this "analysis" ?

  Read the article

• What to look for in a reliable backup hard disk?

  - by Senthil

  I want to buy an internal hard disk and use a docking station along with it for backing up important data. The size will be around 500GB to 1TB. I have a budget and several models fit into it. So far, they only seem to vary in size, speed and brand. These are the only things I can compare from the specs. I guess asking for which brand is best is completely subjective so I won't do that. I want my disk to have long life and be reliable. Doesn't matter if it is somewhat slow. Size: Should I go for the one with highest size within my budget? Will higher density cause problems? Or should I go for a moderately sized one? Does the number of platters have an impact? Speed: I do not want high performance. I want it to be reliable and last long. I am definitely not going to choose the expensive 10,000 rpm ones. Should I go for 5400 or 7200? Do these numbers affect longevity and reliability? Are there any other technical and objective factors that I should look for?

  Read the article

• Oracle BI Applications for Industry Sectors

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE Oracle BI Applications already provide pre-built line-of-business analytic applications to over 4,000 customers: these expose the data otherwise locked inside ERP and CRM applications, giving the business user the analytics they need, and a greater ability to self-service ad-hoc queries. Now you can also take advantage of the pre-built Oracle BI Applications approach for industry sector specific analytics to streamline your client’s operations, offer better services, and increase profit margins. Find out more at http://www.oracle.com/us/solutions/business-analytics/analytic-applications/industry/overview/index.html. Retail Education Oracle Retail Merchandising Analytics Oracle Student Information Analytics Oracle Retail Customer Analytics Public Sector Financial Services Oracle Tax Analytics Oracle Financial Analytics Manufacturing Health Care Oracle Manufacturing Analytics Oracle Enterprise Healthcare Analytics Asset Intensive Oracle Clinical Development Analytics Oracle Enterprise Asset Management Analytics Oracle Operating Room Analytics Related Links Health Sciences Analytic Applications for Your Business Role Oracle Health Sciences Clinical Development Analytics Analytic Applications for Your Product Line Oracle Argus Analytics Oracle Business Intelligence Tools and Technology Communication Oracle Exalytics In-Memory Machine "The adoption of Oracle Financial Services Analytic Applications is of great significance to the bank's transition to more rigorous and risk-averse management practices."Yang Changxue, Project Manager Oracle Communications Data Model /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableGrid {mso-style-name:"Table Grid"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-priority:59; mso-style-unhide:no; border:solid windowtext 1.0pt; mso-border-alt:solid windowtext .5pt; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-border-insideh:.5pt solid windowtext; mso-border-insidev:.5pt solid windowtext; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• Setting kernel memory for installing postgresql

  - by Matthieu Taymans

  My question is about setting the kernel shared memory for installing postgresql on mac osx 10.6.8. In the readme file of postgresql it is said: Shared Memory PostgreSQL uses shared memory extensively for caching and inter-process communication. Unfortunately, the default configuration of Mac OS X does not allow suitable amounts of shared memory to be created to run the database server. Before running the installation, please ensure that your system is configured to allow the use of larger amounts of shared memory. Note that this does not 'reserve' any memory so it is safe to configure much higher values than you might initially need. You can do this by editting the file /etc/sysctl.conf - e.g. % sudo vi /etc/sysctl.conf On a MacBook Pro with 2GB of RAM, the author's sysctl.conf contains: kern.sysv.shmmax=1610612736 kern.sysv.shmall=393216 kern.sysv.shmmin=1 kern.sysv.shmmni=32 kern.sysv.shmseg=8 kern.maxprocperuid=512 kern.maxproc=2048 Note that (kern.sysv.shmall * 4096) should be greater than or equal to kern.sysv.shmmax. kern.sysv.shmmax must also be a multiple of 4096. Once you have edited (or created) the file, reboot before continuing with the installation. If you wish to check the settings currently being used by the kernel, you can use the sysctl utility: % sysctl -a The database server can now be installed. I'm a real beginner with all this but need to instal postgresql for academic purposes do you know how i can set this kernel shared memory. Won't that be harmful for my system? Thank you in advance. Matthieu

  Read the article

• The Power of Goals

  - by BuckWoody

  Every year we read blogs, articles, magazines, hear news stories and blurbs on making New Year’s Resolutions. Well, I for one don’t do that. I do something else. Each year, on January 1, my wife, daughter and I get up early - like before 6:00 A.M. - and find a breakfast place that’s open. When I used to live in Safety Harbor, Florida, that was the “Paradise Café”, which has some of the best waffles around…but I digress. We find that restaurant and have a great breakfast while everyone else is recuperating from the night before. And we bring along a worn leather book that we’ve been writing in since my daughter wasn’t even old enough to read. It’s our book of Goals. A resolution, as it is purely defined, is a decision to change, stop or start an action. It has a sense of continuance, and that’s the issue. Some people decide things like “I’m going to lose weight” or “I’m going to spend more time with my family or hobby”. But a goal is different. A goal tends to have a defined start and end point. It’s something that can be measured. So each year on January 1 we sit down with the little leather book and we make a few - and only a few - individual and family goals. Sometimes it’s to exercise three times a week at the gym, sometimes it’s to save a certain percentage of income, and sometimes it’s to give away some of our possessions or to help someone we know in a specific way. Each person is responsible for their own goals - coming up with them, and coming up with a plan to meet them. Then we write it down in the little leather book. But it doesn’t end there. Each month, we grab the little leather book and read out the goals from that year to each person with a question or two: How are you doing on your goal? And what are you doing about reaching it? Can I help? Am I helping? At the end of the year, we put a checkmark by the goals we reached, and an X by the ones we didn’t. There’s no judgment, there’s no statements, each person is just expected to handle the success or failure in their own way. We also have family goals, and those we work on together. This might seem a little “corny” to some people. “I don’t need to write goals down” they say, “I keep track in my head of the things I do all the time. That’s silly.” But let me give you a little challenge: find a book, get with your family, and write down the things you want to do by the next January 1. Each month, look at the book. You can make goals for your career, your education, your spiritual side, your family, whatever. But if you make your goals realistic, think them through, and think about how you will achieve them, you will be surprised by the power of written goals.

  Read the article

• emule algorithm and how to get fast download speed.

  - by Benjamin

  Actually, I use amule in ubuntu. Because emule users are much more, I wrote emule in this title. But whatever emule or amule, it's okay. Both of them are very similar. I want to get fast-download speed as much as I can. But I don't understand emule(or amule)'s detail functions and algorithms. These are always very qurious to me. If I provide higher upload-speed or more valuable files to other people, can I get benefit?(My download speed) Is serverlist important? Does it cause my download-speed? I captured a image for my amule. Please explain these columns and let me know your tips for getting fast speed. What does 8/9+23 mean in the Source column? What does 294/300(1) mean in the Source column? What does QR:608(0) mean in the Priority? What do I do for getting fast download speed as much as I can get? You can also explain other columns.

  Read the article

• finding the best network latency between two countries

  - by Yoav Aner

  I know there are many tools to test for bandwidth and latency, but they all rely on having at least one host from which you can run those tests. I wonder whether there's an online source or some other way to guestimate the latency or speed between two countries (in general). For example, would a customer in Japan get lower latency if the server is located in Singapore or Australia? Is a user in India likely to get higher download speed from a server in the UK or in the US? Are there any online resources or some clever ways to answer those questions with a reasonable degree of accuracy? [UPDATE]: Thanks for the great suggestions from Raffael Luthiger. I didn't know about those looking glass servers. The submarine cable maps were also really cool to discover (Thanks to Jesper Mortensen). Also seems really wise if I could ask those network professional in the area for their experience, but obviously I don't have access to those. At least some of them are on SF :) However, I'm still a little unsure how to combine those resources to give me some measurements. This is the information I have: Two countries (A,B). I do have IP addresses of customers in country A (I can obtain those from the web server log files for example). Presumably I can find some looking glass servers in country B and run a trace to those IPs. What's the best measurements to use? Are there any scripts that help automate at least some of this process?

  Read the article

• What's next for all of these Microsoft "overlapping" and "enhanced" products ?

  - by indyvoyage

  Recently I attended a road show, organised by MS Gold Partner company in the UK. The products discussed were: SharePoint server (2010 and 2007), Exchange server, Office Communication Server 2007, Exchange hosted services Office Live meeting, Office Communicator, System Center Configuration Manager and Operation Manager, VMware, Windows 7 etc. As Microsoft claims the enhancement in the each product against higher version, I felt that clients are not much interested in all these details. For example Office Communicator, surely they have improved a lot the product and first site all said 'WOW' great product, but nobody wish to pay money for all these extra features. Some argued, they are bogged down by all these increased number of menus. They don't need soft call feature included with mobile call. It apply for all other products as well such as MS office (next what 2 ribbons ?), windows OS and many more. Indeed there must be good features in all these products, but is it worth to spend money and time to update the older system ? Also sometimes these feature will decrease the productivity instead increase it. *So do you think what ever enhancement MS is doing in the products is only for selling purpose, not a real use ?? and I think also keep the developer busy learning the new tools and features. * I am sure some some people here will argue that some people need this sort of features. But I am not talking about NASA or MI5 guys. I am talking of usual businesses and joe public. Any ideas welcome.

  Read the article

• OpenVPN Server - CPU is pegged out

  - by ericl42

  Hello, I am configuring OpenVPN to act as a SSL tunnel for a remote location. I have OpenVPN1 at our current location acting as a server then OpenVPN2 at the other location that is acting as a client but is also acting as a DHCP server to machines behind it so they are basically connected to the local LAN. Everything is set up fine and I can talk from location A to location B with no problems like everyone is local. I am however having some performance issues. OpenVPN1 CPU is pegged to 100% the entire time I am copying or doing any type of activity through the tunnel. I expect some CPU usage going up but nothing like this. It's really killing my performance. OpenVPN1 is running in ESX right now with 2 gig RAM and 4 procs with unlimited bursting capacity. I am using AES-192 encryption with a 1024 key. Any idea how I can get my CPU down on OpenVPN1 and my download/upload speeds higher between the tunnel? Thanks. edit: Turning down the logging helped boost the throughput a little bit, but I am still fairly shy of where I believe I should be. Also I am still maxed out on the CPU. Does anyone have any ideas? I am really stuck on this. Thanks.

  Read the article

• Dell R320 RAID 10 with CacheCade

  - by Geekman

  I'm looking for a higher-performance build for our 1RU Dell R320 servers, in terms of IOPS. Right now I'm fairly settled on: 4 x 600 GB 3.5" 15K RPM SAS RAID 1+0 array This should give good performance, but if possible, I want to also add an SSD Cache into the mix, but I'm not sure if there's enough room? According to the tech-specs, there's only up to 4 total 3.5" drive bays available. Is there any way to fit at least a single SSD drive along-side the 4x3.5" drives? I was hoping there's a special spot to put the cache SSD drive (though from memory, I doubt there'd be room). Or am I right in thinking that the cache drives are simply drives plugged in "normally" just as any other drive, but are nominated as CacheCade drives in the PERC controller? Are there any options for having the 4x600GB RAID 10 array, and the SSD cache drive, too? Based on the tech-specs (with up to 8x2.5" drives), maybe I need to use 2.5" SAS drives, leaving another 4 bays spare, plenty of room for the SSD cache drive. Has anyone achieved this using 3.5" drives, somehow?

  Read the article

• Screen Flickering: Hardware or Software?

  - by Wesley

  I have a Samsung N120 netbook (upgraded to 2GB DDR2 RAM) and there has been a screen flickering issue for some time now. However, I have not been able to accurately determine whether it is a software or hardware issue. Here are some of the symptoms: The flicker is white-colored and shows up as vertical lines. Flickering or not, there may be occasionally some random blue patterns (no image distortion) The screen tends to flicker more when the screen is not tilted back all the way. When tilting the screen back and forth, the screen will usually flicker. Some images on the screen may randomly distort without full-on flickering. The screen will flicker only on certain websites, but not on others. A certain part of a webpage may constantly be distorted randomly, even when scrolling. While flickering, the mouse will not move though I'm moving my finger along the touchpad. A connected external monitor does not have any problems. The flickering is completely random and does not seem to follow any CPU/GPU usage trends. Flickering usually gets worse when the screen brightness is turned higher. There will be flickering on battery and while plugged in. Search up "Samsung N120 - Screen Flickering" on YouTube for an idea of what the flickering looks like. However, there is no visible distortions and the flickering seems to stop when the screen has dimmed. Since the problems started, I tried formatting and using Windows 7, then formatted again and went back to Windows XP. The screen was also replaced sometime during this past summer. The uninstallation of the Samsung Battery Manager (on the original install of XP) seemed to reduce the flicker partially, but eventually got worse. So, what could possibly be the problem?

  Read the article

• Traffic shaping on Linux with HTB: weird results

  - by DADGAD

  I'm trying to have some simple bandwidth throttling set up on a Linux server and I'm running into what seems to be very weird stuff despite a seemingly trivial config. I want to shape traffic coming to a specific client IP (10.41.240.240) to a hard maximum of 75Kbit/s. Here's how I set up the shaping: # tc qdisc add dev eth1 root handle 1: htb default 1 r2q 1 # tc class add dev eth1 parent 1: classid 1:1 htb rate 75Kbit # tc class add dev eth1 parent 1:1 classid 1:10 htb rate 75kbit # tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 10.41.240.240 flowid 1:10 To test, I start a file download over HTTP from the said client machine and measure the resulting speed by looking at Kb/s in Firefox. Now, the behaviour is rather puzzling: the DL starts at about 10Kbyte/s and proceeds to pick up speed until it stabilizes at about 75Kbytes/s (Kilobytes, not Kilobits as configured!). Then, If I start several parallel downloads of that very same file, each download stabilizes at about 45Kbytes/s; the combined speed of those downloads thus greatly exceeds the configured maximum. Here's what I get when probing tc for debug info [root@kup-gw-02 /]# tc -s qdisc show dev eth1 qdisc htb 1: r2q 1 default 1 direct_packets_stat 1 Sent 17475717 bytes 1334 pkt (dropped 0, overlimits 2782 requeues 0) rate 0bit 0pps backlog 0b 12p requeues 0 [root@kup-gw-02 /]# tc -s class show dev eth1 class htb 1:1 root rate 75000bit ceil 75000bit burst 1608b cburst 1608b Sent 14369397 bytes 1124 pkt (dropped 0, overlimits 0 requeues 0) rate 577896bit 5pps backlog 0b 0p requeues 0 lended: 1 borrowed: 0 giants: 1938 tokens: -205561 ctokens: -205561 class htb 1:10 parent 1:1 prio 0 **rate 75000bit ceil 75000bit** burst 1608b cburst 1608b Sent 14529077 bytes 1134 pkt (dropped 0, overlimits 0 requeues 0) **rate 589888bit** 5pps backlog 0b 11p requeues 0 lended: 1123 borrowed: 0 giants: 1938 tokens: -205561 ctokens: -205561 What I can't for the life of me understand is this: how come I get a "rate 589888bit 5pps" with a config of "rate 75000bit ceil 75000bit"? Why does the effective rate get so much higher than the configured rate? What am I doing wrong? Why is it behaving the way it is? Please help, I'm stumped. Thanks guys.

  Read the article

• Outlook conversation view and categories

  - by Greg Jackson

  At work, I tend to receive a couple of hundred emails a day. To keep from being overwhelmed, I have been using categories to sort and prioritize my mail messages. I auto-assign categories, then group by them: Code Reviews, To, CC, Distribution List/BCC. This means that, for example, a message that's explicitly to me will always show up higher in my inbox than one I get because I'm on a Distribution List. It's a huge time saver and it brings important emails to my attention much more quickly. Recently, the email threads I'm involved in have started to get quite long, and I'd like to be able to use conversation view, or at least sort by subject. Outlook, however, doesn't seem to support any (useful) combination of conversation view and categories. I've tried the following things without success: Grouping by category, then conversation view -- Outlook gives me an error (the grouping/sort combination is too complex). Using a custom view to group by conversation -- category doesn't show up as an option to sort by Grouping by category, then subject -- Getting closer, but the top subject is the first alphabetically, not the most recent Grouping by conversation, then category -- This works, but it doesn't do me much good, because the top conversation is the latest, without regard to what category it belongs to Is there a way for me to retain my category system or something similar while taking advantage of grouping related emails together? I've written Outlook plugins in the past, so even that's not too out there to serve as a proper solution.

  Read the article

• Rolling Along: PASS Board Year 2, Q2

  - by Denise McInerney

  Eighteen months into my time as a PASS Director I’m especially proud of what the Virtual Chapters have accomplished and want to share that progress with you. I'm also pleased that the organization has invested more resources to support the VCs. In this quarter I got to attend two conferences and meet more members of the SQL community. Virtual Chapters In the first six months of 2013 VCs have hosted more than 50 webinars, offering free technical education to over 6200 attendees. This is a great benefit to PASS members; thanks to the VC leaders, volunteers and speakers who contribute their time to produce these events. The Performance VC held their “Summer Performance Palooza”, an event featuring eight back-to-back sessions. Links to the session recordings can be found on the VCs web site. The new webinar platform, GoToWebinar, has been rolled out to all the VCs. This is a more stable, scalable platform and represents an important investment into the future of the VCs. A few new VCs are in the planning stages, including one focused on Security and one for Russian speakers. Visit the Virtual Chapter home page to sign up for the chapters that interest you. Each Virtual Chapter is offering a discount code for PASS Summit 2013. Be sure to ask your VC leader for the code to save $200 on Summit registration. 24 Hours of PASS The next 24HOP will be on July 31. This Summit Preview edition will feature 24 consecutive webcasts presented by experts who will be speaking at Summit in October. Registration for this free event is open now. And we will be using the GoToWebinar platform for 24HOP also. Business Analytics Conference April marked the first PASS Business Analytics Conference in Chicago. This introduced PASS to another segment of data professionals: the analysts and data scientists who work with the world’s growing collection of data. Overall the inaugural event was a success and gave us a glimpse into this increasingly important space. After Chicago the Board had several serious discussions about the lessons learned from this seven and what we should do next. We agreed to apply those lessons and continue to invest in this event; there will be a PASS Business Analytics Conference in 2014. I’m very pleased the next event will be in San Jose, CA, the heart of Silicon Valley, a place where a great deal of investment and innovation in data analytics is taking place. Global SQL Community Over the last couple of years PASS has been taking steps to become more relevant to SQL communities in different parts of the world. In May I had the opportunity to attend SQL Bits XI in Nottingham, England. It was enlightening to meet and talk with SQL professionals from around the U.K. as well as many other European countries. The many SQL Bits volunteers put on a great event and were gracious hosts. Budgets The Board passed the FY14 budget at the end of June. The  budget process can be challenging and requires the Board to make some difficult choices about where to allocate resources. Overall I’m satisfied with the decisions we made and think we are investing in the right activities and programs. Next Up The Board is meeting July 18-19 in Kansas City. We will be holding the Executive Committee election for the Exec Co that will take office in 2014. We will also be discussing plans for the next BA conference as well as the next steps for our Global Growth initiative. Applications for the upcoming Board of Directors election open on July 24. If you are considering running for the Board you can visit the PASS elections site to learn more about the election process. And I encourage anyone considering running to reach out to current and past Board members to learn about what the role entails. Plans for the next PASS Summit are in full swing. We are working on some fun new ideas to introduce attendees to the many ways to become involved in the SQL community.

  Read the article

• Memory modules not running at rated speeds.

  - by Wesley

  Hi all, I'm having some odd memory issues with my build. Here are my specs right now: QDI Superb 4 motherboard Intel Pentium 4 Northwood 2.4GHz (512KB L2, 533MHz FSB) 3x 256MB PC2100 DDR266 RAM 16MB NVIDIA TNT2 Pro AGP Seagate 80GB IDE HDD Generic USB 2.0 PCI Generic Modem PCI Bestec 250W PSU To be even more specific, here are the current brands and models of each module: Kingston KVR266X64C25/256 Samsung PC2100U-25331-Z SMART SM5643285D4N0CHM0H Supposedly, they are all PC2100 266MHz modules with a latency of 2.5. Looking in Speccy, the Kingston module is somehow running at a speed of PC2300 ~284MHz. I've never overclocked RAM at all as I don't know how to. However, when I first started the computer, I had the SMART module in place first and then reset the BIOS settings, including the integrated overclocking options. However, this still doesn't explain why the Kingston module runs at a higher speed than the SMART and Samsung module. Why is it like this? On a side note, where could I find the motherboard manual for the QDI Superb 4? Thanks in advance.

  Read the article

• why does mysql have so many more open and fragmented tables than tables in the DB?

  - by kswift

  I've been working making our database run a little smoother and had good results over the past week. But there are still some things I dont understand. For one thing, the database has 25 tables. But mysql status shows 512 are open: mysqladmin status Uptime: 212854 Threads: 1 Questions: 43041 Slow queries: 7 Opens: 2605 Flush tables: 1 Open tables: 512 Queries per second avg: 0.202 I've read that isam opens extra file descriptors and a few other reasons why the number of open tables might be higher than 25, but I am guessing that 512 is not a good thing. Any suggestions on why this might be or what I should be looking into? I've also been using mysqltuner and its been helpful. But it has consistently listed the number of fragmented tables at 207. In phpmyadmin I've selected all the tables and optimized them several times. It hasn't reduced the number of fragmented tables that mysqltuner reports. I think I am missing some important concept about how this all works. Does anyone have any suggestions to point me in the right direction or narrow down google searches or just generally help me be less clueless? Thanks!

  Read the article

• Working and Studying in Oracle, how I balance my time....

  - by anca.rosu

  Hi, my name is Laura. I am working as an Intern within Executive Administration at Oracle Denmark, whilst studying Information Management at Copenhagen Business school. I have recently handeding a paper on Information Systems which gave me exposure to Oracle. Once completing this paper I came across a job posting on my University’s intranet site and I applied directly online. When I submitted my application for the job offer, I wondered about what language I should use for the application form, as the job posting was in Danish, but the contact person and number looked Irish. I therefore chose English. Later that same day, Fiona, one of Oracle’s Graduates Recruitment Consultants based in Ireland, contacted me. This shows how global Oracle truly is. I went for my face-to-face interview in Oracle Denmark with Charlotte, one of the team managers. I spent 5 minutes waiting in the lobby, just looking around, thinking to myself, I really want to work here. The atmosphere seemed so pleasant with a relaxed approach between colleagues, employees and guests. The interview took about an hour, but we touched on a lot of different subjects. The profile I got of Oraclewas that this is a place where you are encouraged to think for yourself, and you are given the freedom to use your ideas. Later that evening, Fiona called and offered me the job. I was very happy. At Oracle Denmark we have 4 different zones: a Quiet Zone, a Project Zone, a Dialogue Zone and a Call Zone. Everyday when you arrive you consider what will be the most productive for the day’s task, and you take your toolbox and go find a desk in the zone you have decided on. It is therefore very unusual to be next to the same person two days in a row. At Oracle, people are located all over the world, and everybody has team members, colleagues or leaders in other countries, or even other time zones. Initially,I was worried about how I would adapt to this approach but I soon realized I had nothing to worry about and now I appreciate working this way. My colleagues have been very supportive and they have openly welcomed me into my new role. I typically work two days a week and have three days at University. During exam periods, I have the flexibility to work less hours and focus on the exams, in return for putting in more hours at work when needed. The first time I had to ask for time off before handing in a paper, my boss looked at me and said, ”Of course! Your education is the most important!” I hope that by sharing my experiences with you, I can inspire or encourage you to consider Oracle as a potential employer, where you can grow both professionally and personally. If you have any questions related to this article feel free to contact  [email protected].  You can find our job opportunities via http://campus.oracle.com Technorati Tags: Intern,Oracle Denmark,Information Systems,Business school,Copenhagen,Graduates Recruitment,Ireland,Quiet Zone,Project Zone,Dialogue Zone,Call Zone,University,flexibility

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >