Search Results

Search found 23832 results on 954 pages for 'home drive'.

Page 110/954 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• How to remove a drive from a 2-drive RAID 5 array?

  - by DrSAR

  There is some information available on shape changes in RAID arrays but I'm a little nervous and would like confirmation: Problem: I have 2 500GB drive as software raid 5 (mdadm). I would like to free one of the two drives since RAID-redundancy is for wimps... Can I just mdadm --grow --array-size=1 followed by a mdadm --grow --raid-disks 1? This seems too simple. How would I specify which drive gets freed? Part of the reason for this maneuver is that I don't have additional space to run a backup.

  Read the article

• Install Windows 8 (clean) on Hybrid Drive

  - by Ananthakrishnan Ravi

  I have a Sony Vaio T series (UEFI) that consists of a Hybrid Drive (SSD + HDD). I would like to install Windows 8 on the SSD and keep the Program files and other applications on the hard disk. What I could perceive was to keep the SSD as the System Drive. I'm able to install the OS on the SSD, but I run into some issues where I don't see the Microsoft Store App on my system and there are no apps on Windows 8. I tried using this blog post but doesn't seem to fit for Windows 8. Any help in this regard would be great. I would like the Windows 8 alone on the SSD, I don't care about the space wasted on the SSD and install other programs on my HDD. Thanks

  Read the article

• Can a windows virus downloaded in linux be transferred to windows?

  - by user219048

  I know that linux is mostly safe from viruses, however: if you do download a windows virus (i.e., through a drive-by download), will it just sit there on your computer, and take up space? Is it unable to infect files because of the different operating system? If you transfer files between computers (by using a usb flash drive or through online file sharing), is there any risk that the virus could be transferred to windows and activate?

  Read the article

• VMWare Server 2.0 Physical disks

  - by heavyd

  I have a machine setup with VMWare Server 2.0. There are several VMs running on the VMWare server and I have several physical drives. I would like to give one of the VMs exclusive access to one entire physical drive. Is it possible to essential give a physical drive to one of the VMs and let it access it as if it were actual hardware?

  Read the article

• How to retain secondary hard drive mounts at reboot and keep shares?

  - by Tom

  I'm running Ubuntu 12.04. A second hard drive connected to this computer does not mount when the computer boots. Additionally, I have set up the drive to be shared but the share is not retained, the share is lost after each boot. My main system drive and a removable drive mount OK and shares remain between boots. Additional information follows: D2Linux sda1 is the secondary hard drive L-Freeagent sdc1 is the removeable drive Here is the contents of fstab immediately after booting (D2Linux /dev/sda1 not yet mounted): '# /etc/fstab: static file system information. ' '# ' '# Use 'blkid' to print the universally unique identifier for a ' '# device; this may be used with UUID= as a more robust way to name devices ' '# that works even if disks are added and removed. See fstab(5). ' '# ' '# ' proc /proc proc nodev,noexec,nosuid 0 0 '# / was on /dev/sdb1 during installation ' UUID=43d29a82-66b3-40f3-91ed-735a27a60004 / ext4 errors=remount-ro 0 1 '# swap was on /dev/sdb5 during installation UUID=cf8e3351-11d0-487a-8a6e-e499c2e88a10 none swap sw ' 0 0 Here is the output of mount with all drives mounted (I did not restore the share): /dev/sdb1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/tom/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tom) /dev/sdc1 on /media/L-Freeagent type ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sda1 on /media/D2Linux type ext4 (rw,nosuid,nodev,uhelper=udisks) Thank you!

  Read the article

• exchange web service C# code send email from home

  - by KK

  Is it possible to write C# code as below and send email using my home network? I have a valid user name and password on that exchange server. Is there any configuration that I can set to achieve this? BTW this code blow works when I run it within office network. I want this code to work when run from any network. String cMSExchangeWebServiceURL = (String)System.Configuration.ConfigurationSettings.AppSettings["MSExchangeWebServiceURL"]; String cEmail = (String)System.Configuration.ConfigurationSettings.AppSettings["Cemail"]; String cPassword = (String)System.Configuration.ConfigurationSettings.AppSettings["Cpassword"]; String cTo = (String)System.Configuration.ConfigurationSettings.AppSettings["CTo"]; ExchangeServiceBinding esb = new ExchangeServiceBinding(); esb.Timeout = 1800000; esb.AllowAutoRedirect = true; esb.UseDefaultCredentials = false; esb.Credentials = new NetworkCredential(cEmail, cPassword); esb.Url = cMSExchangeWebServiceURL; ServicePointManager.ServerCertificateValidationCallback += delegate(object sender1, X509Certificate certificate, X509Chain chain, SslPolicyErrors sslPolicyErrors) { return true; }; // Create a CreateItem request object CreateItemType request = new CreateItemType(); // Setup the request: // Indicate that we only want to send the message. No copy will be saved. request.MessageDisposition = MessageDispositionType.SendOnly; request.MessageDispositionSpecified = true; // Create a message object and set its properties MessageType message = new MessageType(); message.Subject = subject; message.Body = new TestOutgoingEmailServer.com.cogniti.mail1.BodyType(); message.Body.BodyType1 = BodyTypeType.HTML; message.Body.Value = body; message.ToRecipients = new EmailAddressType[3]; message.ToRecipients[0] = new EmailAddressType(); //message.ToRecipients[1] = new EmailAddressType(); //message.ToRecipients[2] = new EmailAddressType(); message.ToRecipients[0].EmailAddress = "[email protected]"; message.ToRecipients[0].RoutingType = "SMTP"; //message.CcRecipients = new EmailAddressType[1]; //message.CcRecipients[0] = new EmailAddressType(); //message.CcRecipients[0].EmailAddress = toEmailAddress.ElementAt(1).ToString(); //message.CcRecipients[0].RoutingType = "SMTP"; //There are some more properties in MessageType object //you can set all according to your requirement // Construct the array of items to send request.Items = new NonEmptyArrayOfAllItemsType(); request.Items.Items = new ItemType[1]; request.Items.Items[0] = message; // Call the CreateItem EWS method. CreateItemResponseType response = esb.CreateItem(request);

  Read the article

• Looking for a fiber optic "switch" or "router" for home use

  - by Shrout1

  The gist of my question: What is a "fiber optic" switch called? I.E. a layer 2 ethernet switch that uses fiber TX and RX connections and sends layer 2 network traffic between the fiber strands that are connected. Can someone purchase a dedicated fiber switch that does not have copper ethernet ports? What is the current average price of a device like this? Not necessarily looking for product endorsements, just information Might not make sense to go this route if it is too cost prohibitive What type of fiber connector is used for terminating a fiber strand into a jack on the wall? Can fiber be "patched" using two jacks and a "patch" cable? Is signal loss a concern with the longest runs at 100-200ft, a patch cable and media converters? The full story: My parents had unterminated fiber optic cable and terminated Cat5e run throughout their home when it was built in 2004. 10 years later the Cat5e isn't providing the throughput that my father needs to accomplish multiple streams of HD and fast system backups throughout the house. He can't reach gigabit speeds across the distance of the Cat5e runs. We are both interested in terminating the fiber connections and using them as high speed "backbones" to copper switches in each room of the house. It would be easy to attain gigabit speeds (or better, eventually) using the fiber. I have searched and searched for a "fiber optic switch" or "fiber optic router" and cannot find the correct term to describe this piece of hardware. We can use fiber media converters at the end points of each connection, however it would be nice to have a "patch panel" set up in the network closet in the basement that has fiber connections on it and switches the ethernet streams between the connections/systems in the house. Each fiber media converter costs between $50-$100 a piece... After 10 or so terminated connections it might make sense to find a piece of hardware that does not require media converters. That would depend upon the cost of this hardware Somewhat unrelated, if we are able to route between these fiber strands successfully, what is the physical connector type used in a jack on the wall? Just like RJ45 has a wall outlet (depicted below): What is the fiber optic equivalent of this? In the interim could we "patch" a couple fiber strands together in the network closet? Would signal loss be of concern with a run length of 100-200 feet, a patch cable and two media converters? If that would work then it could be used until the funds are available for more.

  Read the article

• System locking up with suspicious messages about hard disk

  - by Chris Conway

  My system has started behaving strangely, intermittently locking up. I see messages like the following in syslog: Nov 18 22:22:00 claypool kernel: [ 3428.078156] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Nov 18 22:22:00 claypool kernel: [ 3428.078163] ata3.00: irq_stat 0x40000000 Nov 18 22:22:00 claypool kernel: [ 3428.078167] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Nov 18 22:22:00 claypool kernel: [ 3428.078182] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 22:22:00 claypool kernel: [ 3428.078184] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) Nov 18 22:22:00 claypool kernel: [ 3428.078188] ata3.00: status: { DRDY } Nov 18 22:22:00 claypool kernel: [ 3428.080887] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Nov 18 22:22:00 claypool kernel: [ 3428.080890] ata3.00: irq_stat 0x40000000 Nov 18 22:22:00 claypool kernel: [ 3428.080893] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Nov 18 22:22:00 claypool kernel: [ 3428.080905] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 22:22:00 claypool kernel: [ 3428.080906] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) Nov 18 22:22:00 claypool kernel: [ 3428.080910] ata3.00: status: { DRDY } And then this: Nov 18 23:13:56 claypool kernel: [ 6544.000798] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Nov 18 23:13:56 claypool kernel: [ 6544.000804] ata1.00: failed command: FLUSH CACHE EXT Nov 18 23:13:56 claypool kernel: [ 6544.000814] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 23:13:56 claypool kernel: [ 6544.000815] res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout) Nov 18 23:13:56 claypool kernel: [ 6544.000819] ata1.00: status: { DRDY } Nov 18 23:13:56 claypool kernel: [ 6544.000825] ata1: hard resetting link Nov 18 23:14:01 claypool kernel: [ 6549.360324] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:06 claypool kernel: [ 6554.008091] ata1: COMRESET failed (errno=-16) Nov 18 23:14:06 claypool kernel: [ 6554.008103] ata1: hard resetting link Nov 18 23:14:11 claypool kernel: [ 6559.372246] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:16 claypool kernel: [ 6564.020228] ata1: COMRESET failed (errno=-16) Nov 18 23:14:16 claypool kernel: [ 6564.020235] ata1: hard resetting link Nov 18 23:14:21 claypool kernel: [ 6569.380109] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:31 claypool kernel: [ 6579.460243] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 18 23:14:31 claypool kernel: [ 6579.486595] ata1.00: configured for UDMA/133 Nov 18 23:14:31 claypool kernel: [ 6579.486601] ata1.00: retrying FLUSH 0xea Emask 0x4 Nov 18 23:14:31 claypool kernel: [ 6579.486939] ata1.00: device reported invalid CHS sector 0 Nov 18 23:14:31 claypool kernel: [ 6579.486952] ata1: EH complete Nov 18 23:17:01 claypool CRON[3910]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Nov 18 23:17:01 claypool CRON[3908]: (CRON) error (grandchild #3910 failed with exit status 1) Nov 18 23:17:01 claypool postfix/sendmail[3925]: fatal: open /etc/postfix/main.cf: No such file or directory Nov 18 23:17:01 claypool CRON[3908]: (root) MAIL (mailed 1 byte of output; but got status 0x004b, #012) Nov 18 23:39:01 claypool CRON[4200]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm) There are no messages marked after 23:39. When I next tried to use the machine, it would not return from the screensaver (blank screen), nor switch to another terminal, and I had to hard reboot it. [UPDATE] The output of smartctl is here. I had trouble getting this, because / is being mounted read-only (?!), which prevents most applications from running. Also, it may not be related, but I have the following worrying messages in dmesg: [ 10.084596] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 10.098477] i2c i2c-0: nForce2 SMBus adapter at 0x600 [ 10.098483] ACPI: resource nForce2_smbus [io 0x0700-0x073f] conflicts with ACPI region SM00 [??? 0x00000700-0x0000073f flags 0x30] [ 10.098486] ACPI: This conflict may cause random problems and system instability [ 10.098487] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.098509] i2c i2c-1: nForce2 SMBus adapter at 0x700 [ 10.112570] Linux agpgart interface v0.103 [ 10.155329] atk: Resources not safely usable due to acpi_enforce_resources kernel parameter [ 10.161506] it87: Found IT8712F chip at 0x290, revision 8 [ 10.161517] it87: VID is disabled (pins used for GPIO) [ 10.161527] it87: in3 is VCC (+5V) [ 10.161528] it87: in7 is VCCH (+5V Stand-By) [ 10.161560] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region ECRE [??? 0x00000290-0x000002af flags 0x45] [ 10.161562] ACPI: This conflict may cause random problems and system instability [ 10.161564] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [UPDATE 2] I swapped in a new SATA cable, per Phil's suggestion. The current output of smartctl is here, if it helps. [UPDATE 3] I don't think the cable fixed it. The system hasn't locked up yet, but my media player crashed a few minutes ago and I have the following in the syslog: Nov 20 16:07:17 claypool kernel: [ 2294.400033] ata1: link is slow to respond, please be patient (ready=0) Nov 20 16:07:47 claypool kernel: [ 2324.084581] ata1: COMRESET failed (errno=-16) Nov 20 16:07:47 claypool kernel: [ 2324.084588] ata1: limiting SATA link speed to 1.5 Gbps Nov 20 16:07:47 claypool kernel: [ 2324.084592] ata1: hard resetting link I get the following response from smartctl: $ sudo smartctl -a /dev/sda [sudo] password for chris: sudo: Can't open /var/lib/sudo/chris/0: Read-only file system smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Device: /0:0:0:0 Version: scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46 >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

  Read the article

• Polished DIY Projector Is Painted Right onto the Wall

  - by Jason Fitzpatrick

  If you’re contemplating building a projector screen but find yourself not entirely unhappy with just projecting right onto the wall, this simple paint-it-on-the-wall upgrade is for you. Check out the above video to see the steps required to patch, paint, and frame a space on your wall to serve as a projection screen. You’ll need spackle, sandpaper, white paint, and some very basic carpentry skills to complete the simple wood frame for your painted-on screen. If you’d like to create a screen using the same technique but make it removable (for adjustments or to take it with you when you move out) you can just as easily use the paint-it-on technique with a piece of hardboard instead of the drywall. [via Hack A Day] HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks

  Read the article

• A way for an Upstart event to be sent whenever ecryptfs homedir mounted/unmounted?

  - by David Olivier

  I have an encrypted homedir (ecryptfs) and I'm wanting to run a private mysql daemon with the database files in my homedir. The daemon should be started whenever the homedir is mounted, and stopped before the homedir is unmounted. It seems I have to write an Upstart script, which doesn't seem too hard; the problem is triggering it. Is there already any Upstart event that is sent on these occasions? Or must I insert an "initctl emit" somewhere? Where? It seems the encrypted homedir is mounted whenever I either open my GUI session or ssh to my account. Is there a common place in these two processes where I might insert code? (I don't want to patch and compile any C code, just insert maybe a few lines somewere.) David

  Read the article

• Game of Thrones Theme Played on Eight Floppy Drives [Video]

  - by Asian Angel

  YouTube user MrSolidSnake745 has put together a fun (and awesome) rendition of the ‘Game of Thrones’ theme using eight floppy drives. Game Of Thrones Theme on eight floppy drives [via Geeks are Sexy] HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

  Read the article

• Can I have a single solid state drive and a RAID array on the same machine?

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

• Trying to use HUAWEI E173 on Ubuntu 12.04

  - by Scott Warren

  I have a HUAWEI E173 usb stick to access the internet. It works normally on windows but I need to use it on my Ubuntu system. I plug it in, and after 25-20 seconds the status light turns green and blinks twice every 3 seconds. I see no changes in my system whatsoever, nothing gets installed, I don't get prompted for my PIN. I tried to create a connection using edit connections. I entered the following parameters: Turkey, Turkcell, My Plan is not listed, Internet. Nothing happens. I tried the lsusb command and got the following: tosh2000@tosh:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 058f:a001 Alcor Micro Corp. Bus 001 Device 004: ID 12d1:14ba Huawei Technologies Co., Ltd. I tried the usb-devices command and can see the device: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=14ba Rev=00.00 S: Manufacturer=HUAWEI Technology S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Based on other advice I found, I tried the following command: sudo modprobe usbserial vendor=0x12d1 product=0x14ba Again, nothing happened. My question is why does the "enable mobile broadband" not populate automatically in the dropdown networking menu and how can I can I start using the device? Thank you.

  Read the article

• Unable to format 16Gb Usb Disk

  - by akshay.is.gr8

  Whenever i try to format my 16 GB usb disk using gparted it does to formating and when it refreshes then show unknown. tried disk utility as well. disk utility was able to format it into FAT but files vanish web the disk is removed and attached again. edit: the disk format completes every time but when using gparted it immediately show Unknown type file system and disk utility show FAT but when the Disk is unplugged and then connected the files are not there. either way it is unusable.

  Read the article

• Silabs cp2102 driver problem

  - by Zxy

  I downloaded appropriate driver from its own site, unzipped it and then tried to install it. But: root@ghostrider:/home/zero/Downloads# tar xvf cp210x-3.1.0.tar.gz cp210x-3.1.0/ cp210x-3.1.0/COPYING cp210x-3.1.0/cp210x/ cp210x-3.1.0/cp210x-3.1.0.spec cp210x-3.1.0/cp210x/.rpmmacros cp210x-3.1.0/cp210x/configure cp210x-3.1.0/cp210x/cp210x.c cp210x-3.1.0/cp210x/cp210x.h cp210x-3.1.0/cp210x/cp210xuniversal.c cp210x-3.1.0/cp210x/cp210xuniversal.h cp210x-3.1.0/cp210x/installmod cp210x-3.1.0/cp210x/Makefile24 cp210x-3.1.0/cp210x/Makefile26 cp210x-3.1.0/cp210x/rpmmacros24 cp210x-3.1.0/cp210x/rpmmacros26 cp210x-3.1.0/cp210x/Rules.make cp210x-3.1.0/INSTALL cp210x-3.1.0/makerpm cp210x-3.1.0/PACKAGE-LIST cp210x-3.1.0/README cp210x-3.1.0/RELEASE-NOTES cp210x-3.1.0/REPORTING-BUGS cp210x-3.1.0/rpm/ cp210x-3.1.0/rpm/brp-java-repack-jars cp210x-3.1.0/rpm/brp-python-bytecompile cp210x-3.1.0/rpm/check-rpaths cp210x-3.1.0/rpm/check-rpaths-worker root@ghostrider:/home/zero/Downloads# cd cp210x-3.1.0 root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# ls COPYING cp210x-3.1.0.spec makerpm README REPORTING-BUGS cp210x INSTALL PACKAGE-LIST RELEASE-NOTES rpm root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# run ./makerpm No command 'run' found, did you mean: Command 'zrun' from package 'moreutils' (universe) Command 'runq' from package 'exim4-daemon-heavy' (main) Command 'runq' from package 'exim4-daemon-light' (main) Command 'runq' from package 'sendmail-bin' (universe) Command 'grun' from package 'grun' (universe) Command 'qrun' from package 'torque-client' (universe) Command 'qrun' from package 'torque-client-x11' (universe) Command 'lrun' from package 'lustre-utils' (universe) Command 'rn' from package 'trn' (multiverse) Command 'rn' from package 'trn4' (multiverse) Command 'rup' from package 'rstat-client' (universe) Command 'srun' from package 'slurm-llnl' (universe) run: command not found root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# sudo ./makerpm + uname -r + kernel_release=3.2.0-25-generic-pae + pwd + current_dir=/home/zero/Downloads/cp210x-3.1.0 + export current_dir + uname -r + KVER=3.2.0-25-generic-pae + echo 3.2.0-25-generic-pae + awk -F . -- { print $1 } + KVER1=3 + echo 3.2.0-25-generic-pae + awk -F . -- { print $2 } + KVER2=2 + sed -e s/3\.2\.//g + echo 3.2.0-25-generic-pae + KVER3=0-25-generic-pae + [ -f /root/.rpmmacros ] + echo 2 2 + [ 2 == 4 ] ./makerpm: 25: [: 2: unexpected operator + echo 0-25-generic-pae 0-25-generic-pae + [ 0-25-generic-pae -gt 15 ] ./makerpm: 29: [: Illegal number: 0-25-generic-pae + cp /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros24 /root/.rpmmacros + d=/var/tmp/silabs + [ ! -d /var/tmp/silabs ] + mkdir /var/tmp/silabs + cd /var/tmp/silabs + r=/var/tmp/silabs/rpmbuild + o=cp210x-3.1.0 + s=/var/tmp/silabs/rpmbuild/SOURCES + spec=cp210x-3.1.0.spec + rm -rf /var/tmp/silabs/rpmbuild + mkdir rpmbuild + mkdir rpmbuild/SOURCES + mkdir rpmbuild/SRPMS + mkdir rpmbuild/SPECS + mkdir rpmbuild/BUILD + mkdir rpmbuild/RPMS + cd /var/tmp/silabs/rpmbuild/SOURCES + rm -rf cp210x-3.1.0 + mkdir cp210x-3.1.0 + cp -r /home/zero/Downloads/cp210x-3.1.0/cp210x/Makefile24 /home/zero/Downloads/cp210x-3.1.0/cp210x/Makefile26 /home/zero/Downloads/cp210x- 3.1.0/cp210x/Rules.make /home/zero/Downloads/cp210x-3.1.0/cp210x/configure /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210x.c /home/zero/Downloads/cp210x- 3.1.0/cp210x/cp210x.h /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210xuniversal.c /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210xuniversal.h /home/zero/Downloads/cp210x- 3.1.0/cp210x/installmod /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros24 /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros26 cp210x-3.1.0 + echo 2 2 + [ 2 == 4 ] ./makerpm: 64: [: 2: unexpected operator + echo 0-25-generic-pae 0-25-generic-pae + [ 0-25-generic-pae -gt 15 ] ./makerpm: 68: [: Illegal number: 0-25-generic-pae + cp /home/zero/Downloads/cp210x-3.1.0/cp210x/.rpmmacros24 cp210x-3.1.0/.rpmmacros cp: cannot stat `/home/zero/Downloads/cp210x-3.1.0/cp210x/.rpmmacros24': No such file or directory + MyCopy=0 + rm -f cp210x-3.1.0.tar + rm -f cp210x-3.1.0.tar.gz + tar -cf cp210x-3.1.0.tar cp210x-3.1.0 + gzip cp210x-3.1.0.tar + cp /home/zero/Downloads/cp210x-3.1.0/cp210x-3.1.0.spec /var/tmp/silabs/rpmbuild/SPECS + rpmbuild -ba /var/tmp/silabs/rpmbuild/SPECS/cp210x-3.1.0.spec ./makerpm: 121: ./makerpm: rpmbuild: not found + [ -f /root/.rpmmacros.cp210x ] How may I solve my problem? Thanks

  Read the article

• remove failed ubuntu installation

  - by kapitanluffy

  i tried installing ubuntu alongside windows 7 Installing Ubuntu alongside Windows and i failed so i decided to go with wubi again. after installing it, i noticed a separate hard disk. i investigated and found out that this hard disk is actually for the failed installation. i don't know where to find it inside the windows system. can anyone please teach me how to remove the 'failed' hard disk. here's a screenshot the left side is the current filesystem. the right side on the other hand is the 'failed' harddisk. i verified that it is the failed one because the wubi installation will provide a 'host' folder for the current partition it is currently installed. i tried looking for the 'failed' one using the windows' commandline but i don't know where to look for the 'failed' disk. (i used the cmd coz i don't want root.disk to mysteriously disappear again.) see http://ubuntu-with-wubi.blogspot.com/2011/01/mystery-of-disappearing-rootdisk.html

  Read the article

• Can I do an install onto a 4GB usb stick which is smaller than the recommended installation size?

  - by Radek

  I've read through this question: How do I install Ubuntu to a USB key? So I am aware how to install Ubuntu onto a USB stick. I'm also aware that the minimum recommended HDD requirement for ubuntu is 5GB. my question is specifically, can I squeeze the install of Ubuntu 11.10 onto a 4GB usb stick? Can I do so without downloading alternate version of Ubuntu? All I want is firefox wi-fi What I have live USB of Ubuntu 11.10 notebook without hdd internet access 4GB usb stick The reason why I need full install is to install new programs (skype) and do upgrade (of flash player)

  Read the article

• Can I share a TV card?

  - by Boris

  My environment: 2 PCs, a desktop and a laptop, both on Oneiric they are connected together by ethernet wire nfs-common is installed and configured: the desktop is the server a TV tuner card is installed on the desktop, I can watch TV with the software Me-TV It works fine, TV on desktop, and my network too: I share folders thanks to NFS. But I would like more: How can I share my TV tuner card from the desktop and be able to watch TV on the laptop too? If possible I would like a solution that allows me to keep using the software Me-TV, on both PCs. I bet that there is a solution to create a fake TV card on the 2nd PC with xNBD. I'm trying xnbd-server --target /dev/dvb/adapter0/demux0 but I cant make it work. Trying to understand some examples of xNBD command lines, it seems to be meant only for sharing disk player. If someone as ever used xNBD, he's welcome.

  Read the article

• western digital caviar black. EXT4-fs error [migrated]

  - by azat

  Recently I update my HDD on desktop machine, and bought WD Caviar Black. But after I format & copy information to it (using dd), and fix partitions size: I have next errors in kern.log: Aug 27 16:04:35 home-spb kernel: [148265.326264] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9054, 32254 clusters in bitmap, 32258 in gd Aug 27 16:07:11 home-spb kernel: [148421.493483] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9045, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:17 home-spb kernel: [148546.481693] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10299, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:17 home-spb kernel: [148546.487147] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.258711] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4345, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.277591] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.278202] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4344, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.284760] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.291983] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9051, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.297495] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.297916] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9050, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.297940] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.303213] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4425, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.312127] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.312487] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4424, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.317858] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.322231] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4336, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.326250] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.326599] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4335, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.332397] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.341957] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 5764, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.350709] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.351127] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 5763, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.355916] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.401055] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10063, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.404357] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.414699] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10073, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.420411] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.493933] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9059, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.493956] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. One time, machine rebooted (not manually), when I turn it on, it runs fsck on /dev/sdc2 and fix some errors and some files are missing on /dev/sdc2 I'v check /dev/sdc2 for badblocks, it doesn't have it ( using e2fsck -c /dev/sdc2 ) Here is the output of fsck http://pastebin.com/D5LmLVBY What else I can do to understand what's wrong here? BTW for /dev/sdc1 no message like that, in kern.log Linux version: 3.3.0 Distributive: Debian wheezy

  Read the article

• How to format FAT32 filesystem infected with windows virus and that is write protected

  - by explorex

  Hi, I have a pendrive with FAT32 filesystem. it is infected with virus dont know which but has autorun.inf and create exe file within folder. I tried to format it with various filesystems and even try to delete it with GParted but couldn't because it says it is write protected i can't even delete files. How to format it? user@explorerx:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbd04bd04 Device Boot Start End Blocks Id System /dev/sda1 * 1 498 3998720 82 Linux swap / Solaris Partition 1 does not end on cylinder boundary. /dev/sda2 499 19457 152287585+ f W95 Ext'd (LBA) /dev/sda5 5100 10198 40957686 7 HPFS/NTFS /dev/sda6 10199 14787 36861111 7 HPFS/NTFS /dev/sda7 14788 19457 37511743+ 7 HPFS/NTFS /dev/sda8 499 5099 36956160 83 Linux Partition table entries are not in disk order Disk /dev/sdc: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc13bc13b Device Boot Start End Blocks Id System /dev/sdc1 1 9729 78143488 7 HPFS/NTFS /dev/sdc2 9729 19457 78143488 7 HPFS/NTFS Disk /dev/sdb: 4194 MB, 4194304000 bytes 112 heads, 47 sectors/track, 1556 cylinders Units = cylinders of 5264 * 512 = 2695168 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 2 1557 4091904 b W95 FAT32

  Read the article

• How to tell thunar to stop using my device?

  - by Guillaume Coté

  When I do sudo umount /media/KINGSTON I got umount: /media/KINGSTON: device is busy. By using fuser -c /media/KINGSTON And cat /proc/<pid>/cmdline I found that the process is thunar--deamon. I closed all file manager windows. When I try to umount it by right cliking on the desktop, it also gave an error : An application is preventing the volume "KINGSTON" from being unmounted I am affraid that killing Thunar is going to impact other process running in other terminal. How can I tell it that I don't need this usb key anymore so it stop using it?

  Read the article

• Mounting a Microsoft Azure CloudDrive in a VMRole

  - by SeanBarlow

  Mounting a Drive in a VMRole is a little more complicated then a web or worker.  The Web and Worker roles offer OnStart and OnStop events, which you can use to mount or unmount your drives. The VMRole does not have these same events so you have to provide another way for the drives to be mounted or unmounted. The problem I have run into is what if you have multiple drives and you only want to mount certain drives. How do you let your user mount the drive. I am not going to go into details on what kind of GUI to present to the user. I have done this in a simple WPF application as well as a console application. We are going to need to get the storage account details. One thing to note when you are mounting cloud drives you cannot use https and have to use http. We force the use of http by using false when we create the CloudStorageAccount.   StorageCredentialsAccountAndKey credentials = new StorageCredentialsAccountAndKey("AccountName", "AccountKey"); CloudStorageAccount storageAccount = new CloudStorageAccount(credentials, false);   Next we need to get a reference to the container.   var blobClient = storageAccount.CreateCloudBlobClient(); var container = blobClient.GetContainerReference("ContainerName");   Now we need to get a list of the drives in the container   var drives = container.ListBlobs();   Now that we have a list of the drives in the container we can let the user choose which drive they want to mount. I am just selecting the 1st drive in the list for the example and getting the Uri of the drive.   var driveUri = drives.First().Uri;   Now that we have the Uri we need to get the reference to the drive. var drive = new CloudDrive(driveUri, storageAccount.Credentials);   Now all that is left is to mount the drive.   var driveLetter = drive.Mount(0, DriveMountOptions.None);   To unmount the drive all you have to do is call unmount on the drive. drive.Unmount();   You do need to make sure you unount the drives when you are done with them. I have run into issues with the drives being locked until the VMRole is rebooted. I have also managed to have a drive be permanently locked and I was forced to delete it and upload it again. I have been unable to reproduce the permanent lock but I am still trying. The CloudDrive class provides a handy method to retrieve all the mounted drives in the Role. foreach (var drive in CloudDrive.GetMountedDrives()) {          var mountedDrive = Account.CreateCloudDrive(drive.Value.PathAndQuery);          mountedDrive.Unmount(); }

  Read the article

• Issue 15: Oracle Exastack: Are You Ready?

  - by rituchhibber

    ORACLE EXASTACK: ARE YOU READY? SVP Focus: Chris Baker Oracle Exastack Partner Focus The Benefits of Oracle Exastack Oracle PartnerNetwork Exchange @ Oracle OpenWorld PARTNER FOCUS Oracle Exastack Partner Focus Steve McNickle is VP Europe for cVidya, the long-term Oracle Gold level partner currently racking up accreditation for its solutions as a pioneering partner in the Oracle Exastack Optimized programme Read the full article SOLUTIONS FOCUS The Benefits of Oracle Exastack Paul Thompson, Director of Oracle EMEA Alliances and Solutions Partner Programs, explains the benefits of the Oracle Exastack Program in supporting ISV partners across the Oracle Exa family Read the full article ORACLE FOCUS OPN Exchange @ Oracle OpenWorld Sylvie Michou, Senior Director, Partner Marketing & Communications and Strategic Programs, introduces the dedicated Oracle PartnerNetwork Exchange @ Oracle OpenWorld Read the full article

  Read the article

• fat32 partition lock

  - by gsedej

  Hi! A am asking about problem with USB data stick (that uses fat32 file system). If you unplug USB stick without unmounting (safly remove) data may become locked when you mount USB stick another time (you can't make changes to files). If you unmount and mount partition few times, data becomes normally accessable. Problem is that I can not repeat (force) this problem now. But it has happend many times even recently. Has this been happening to somoeone else?

  Read the article

• Do I need to replace my hard disk?

  - by Sneha Kamath

  Hello everyone. Whenever I start my computer Ubuntu pops up the following error: A hard disk may be failing one or more hard disk report health problems A friend of mine ran some test and it was found that my hard disk has 74 bad sectors. Is this merely a software issue that will be solved after a complete format of my hard disk, or is it a hardware issue and I will have to replace my hard disk? Awaiting your responses. Thanks, Sneha Kamath.

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >