Search Results

Search found 5231 results on 210 pages for 'red eye'.

Page 110/210 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

  • Juniper J4350 out of order

    - by Benjamin Baron
    I have got two (2) Juniper routers J4350 that are out of order : All the interfaces are down (leds on the interfaces don't ligthen, ping dosen't respond) No output on the console port (even when booting) I've tried to reset the router (holding the RESET CONFIG button on the front panel during 15 seconds) and nothing happened, even while booting the device I've opened the router to check the fans. I've removed some dust and nothing has changed. I wanted to precise that the leds on the front panel are all on: The POWER led is green The STATUS led is red The ALARM led is on and is orange The HA (High Availablity) is on and orange as well I have found nothing on the Internet to solve this problem... Thank you for helping me :)

    Read the article

  • terminal tools and logs for debugging TCP issues

    - by kellogs
    I have a server which I am testing for functionality (not load, not stress) with tsung. 50 users / second, 100 total users. Judging from tsung (tsung is the testing framework) graphs, there TCP connections (red line) drops to 0 while the commenced user sessions (green line) does not. Server logs show nothing to be gripping onto, so I am speculating some kind of TCP issue. Should this be the case ? Where would I look further on the server, any logs / tools to be looking at ? Only SSH available, no GUI. > root@XMPP:~# cat /etc/lsb-release > DISTRIB_ID=Ubuntu > DISTRIB_RELEASE=11.10 > DISTRIB_CODENAME=oneiric > DISTRIB_DESCRIPTION="Ubuntu 11.10" Thank you

    Read the article

  • Can a 32-bit RHEL4 userland work with a 64-bit kernel?

    - by James
    Is there a way to change an i386 RHEL4 machine to run an amd64 kernel, but ensure that it still builds software into same i386 binaries? On Debian this seems quite straightforward: just install an amd64 kernel (worst case, build one like this guy: http://www.debian-administration.org/users/jonesy/weblog/1) and prefix everything with "linux32". Then everything that considers uname -m will be unchanged, I just need to handle the few cases that consider uname -r. What is the Red Hat equivalent? Is the only way a full 64-bit installation on another disk and then chrooting back to the 32-bit system before anyone builds anything? (Even the best examples of that seem to be Debian-based.) Background: We make a large system that runs on (a variant of) i386 RHEL4. However, some of the larger RHEL build machines now have enough RAM that they might benefit from going 64-bit (for the kernel and maybe some of the bigger build steps). Our build system doesn't support cross-compilation.

    Read the article

  • Keeping Xv Overlay configuration throughout an X session.

    - by kriss
    After upgrading my Linux system from Ubuntu 9.04 to Ubuntu 10.10, I suceeded correcting most problems (all related to Intel 82865G Integrated Graphics Adapter support and compiz is still not working but that's another matter) but for one I only have a partial solution. Whenever I play a video the colors are much too saturated. This is really a problem for tones of skins that appears reddish (everyone seems to be coming back from a ski vacation with deep sun burns). As this effect only occurs with videos, not with pictures, I finally figured out it was related to Video Overlays configuration and I can correct it typing: xvattr -a XV_SATURATION -v 120 This change the default saturation value, which is 500 and much too high in my case, at eye sight the correct value seems to be between 100 and 150. Now my problem is that I have to type the above command each time I run a video. If I type it before running the video it has no effect, if I close the video and open a new one, I have to type it again, etc. I tried to put it in Xsession and (logically) it has no effect either. How could I do to get the correct setting whenever I run a video without typing the above command every time ?

    Read the article

  • Configuring Redhat / CentOS 5 SSH to authenticate to IPA server with public keys

    - by Kyle Flavin
    I'm trying to configure some Red Hat/CentOS servers to use an ipa-server on CentOS 6 for SSH authentication with public keys. I'm storing the public keys on the IPA server, which works great on Centos6 using "AuthorizedKeysCommand /usr/bin/sss_ssh_authorizedkeys" in /etc/ssh/sshd_config. However, on RH 5.10, neither the "AuthorizedKeysCommand" directive or the "/usr/bin/sss_ssh_authorizedkeys" command exist to pull the public key from the directory. Is there a different way to make this work? Googling this mostly returns instructions for setting it up on 6.

    Read the article

  • Change the content of a <style> element through JavaScript

    - by paercebal
    The Problem I have the following code: <html> <head> <style id="ID_Style"> .myStyle { color : #FF0000 ; } </style> </head> <body> <p class="myStyle"> Hello World ! </p> </body> </html> And I want to modify the contents of <style> through JavaScript. The Expected Solution The first solution was to use the innerHTML property of the style element (retrieved through its id), but while it works on Firefox, it fails on Internet Explorer 7. So, I used pure DOM methods, that is, creating an element called style, a text node with the desired content, and append the text node as a child of the style node, etc. It fails, too. According to MSDN, the <style> element has an innerHTML property, and according to W3C, the <style> element is a HTMLStyleElement, which derives from HTMLElement, deriving from Element deriving from Node, which has the appendChild method. It seems to behave as if the content of a <style> element was readonly on Internet Explorer. The Question So the question is: Is there a way to modify the content of a <style> element on Internet Explorer? While the current problem is with IE7, a cross-browser solution would be cool, if possible. Appendix Sources: Style Element (MSDN): http://msdn.microsoft.com/en-us/library/ms535898.aspx HTMLStyleElement (W3C): http://www.w3.org/TR/2003/REC-DOM-Level-2-HTML-20030109/html.html#ID-16428977 Complete Test Code You can use this test code if you want to reproduce your problem: <html> <head> <style id="ID_Style"> .myStyle { color : #FF0000 ; } </style> <script> function replaceStyleViaDOM(p_strContent) { var oOld = document.getElementById("ID_Style") ; var oParent = oOld.parentNode ; oParent.removeChild(oOld) ; var oNew = document.createElement("style") ; oParent.appendChild(oNew) ; oNew.setAttribute("id", "ID_Style") ; var oText = document.createTextNode(p_strContent) ; oNew.appendChild(oText) ; } function replaceStyleViaInnerHTML(p_strContent) { document.getElementById("ID_Style").innerHTML = p_strContent ; } </script> <script> function setRedViaDOM() { replaceStyleViaDOM("\n.myStyle { color : #FF0000 ; }\n") } function setRedViaInnerHTML() { replaceStyleViaInnerHTML("\n.myStyle { color : #FF0000 ; }\n") } function setBlueViaDOM() { replaceStyleViaDOM("\n.myStyle { color : #0000FF ; }\n") } function setBlueViaInnerHTML() { replaceStyleViaInnerHTML("\n.myStyle { color : #0000FF ; }\n") } function alertStyle() { alert("*******************\n" + document.getElementById("ID_Style").innerHTML + "\n*******************") ; } </script> </head> <body> <div> <button type="button" onclick="alertStyle()">alert Style</button> <br /> <button type="button" onclick="setRedViaDOM()">set Red via DOM</button> <button type="button" onclick="setRedViaDOM()">set Red via InnerHTML</button> <br /> <button type="button" onclick="setBlueViaDOM()">set Blue via DOM</button> <button type="button" onclick="setBlueViaInnerHTML()">set Blue via InnerHTML</button> </div> <p class="myStyle"> Hello World ! </p> </body> </html> Thanks !

    Read the article

  • background image disappears when position relative used in firefox

    - by toomanyairmiles
    So I'm trying to add a badge to the top right corner of a site I'm doing some work on. z-index works to float the object above the page content but each time i try to use position relative the background image disappears only position absolute shows the image. I don't really want to use absolute as the image needs to be positioned on the right hand side of the sites menu bar not the right hand side of the viewport. Any thoughts or advice appreciated <div class="badge-box"> <a href="http://www.google.com" class="badge">Book Now!</a> </div> <div id="header"> <a href="index.php"><img src="images/pixel.gif" width="378" height="31" alt="Welcome to Gwynfryn Farm Cottages" /></a> </div> <div id="main-menu"> <div> <a href="/">Home</a> <a href="/cottages.php">Our Cottages</a> <a href="/gwynfryn.php">Bed &amp; Breakfast</a> <a href="/rates.php">Price Guide</a> <a href="/llanbedr.php">Location &amp; Local Attractions</a> <a href="/news.php">News &amp; Special Offers</a> <a href="/contact.php">Contact Us</a> </div> </div> .badge-box { width: 1030px; margin-left: auto; margin-right: auto; border: 0px solid red; } .badge { background: url(../images/badge.png) 0px 0px no-repeat; width: 148px; height: 148px; text-indent: -10000px; position: relative; z-index: 999; } #header { width: 960px; height: 40px; margin-left:auto; margin-right:auto; margin-top:20px; padding: 20px 0px 0px 20px; background: #58564f url(../images/header-top-background.png); } #main-menu { width: 980px; margin-left: auto; margin-right: auto; height: 35px; /*background: red;*/ background: #58564f url(../images/header-bottom-background.png); font-family: Georgia, "Times New Roman", Times, serif; } #main-menu div { width: 776px; height: 35px; margin-left: auto; margin-right: auto; background: blue; } #main-menu div a { display: block; float: left; padding: 5px 10px 0px 10px; height: 30px; color: #FFFFFF; font-size: 1.2em; text-align: center; background: green; } #main-menu div a:hover { background-color: #333333; }

    Read the article

  • Using Gentoo's `ebegin`, `eend` etc under Ubuntu

    - by Marcus Downing
    We're quite fond of the style of the ebegin, eend, eerror, eindent etc commands used by Portage and other tools on Gentoo. The green-yellow-red bullets and standard layout make for very quick spotting of errors, on what would otherwise be very grey command line output. #!/bin/sh source /etc/init.d/functions.sh ebegin "Copying data" rsync .... eend $? Producing output similar to: * Copying data... [ OK ] As a result we're using these commands in some of our common shell scripts, which is a problem for the people using Ubuntu and other linuxes. (linuces? linuxen? linucae? other distros) On Gentoo these functions are provided by OpenRC, and imported with functions.sh file (whose exact position seems to vary slightly). But is there a simple way of getting these commands on Ubuntu? In theory we could replace them all with dull echos, but we'd rather not?

    Read the article

  • Problem with bios update on Intel S3420GP

    - by wurlog
    I am using the Intel Develepment Assistant CD, but after choosing the newest update I can see a red text but just for a second. Afterwards it tells me to reboot, but it is still the same bios version as before. I can't find access the error message. The whole software seams to be a linux. Maybe I can access a console and look into the log files?? Or are there other solutions to update the bios? EDIT: I tried to download the bios/firmware update packages (using it via network share, because the usb stick wouldn't work), but the software wont use it.

    Read the article

  • Automate creation of Windows startup script?

    - by Niten
    Is there a good way to automate installing local startup (rather than login) scripts in Windows XP and Windows 7, via the command line, WMI, COM, or otherwise (even Win32 if it comes to that)? I need to setup a local startup script on a large number of computers, and unfortunately, Active Directory is absolutely not an option. I would like to write a script or small program that I can run on each computer to perform the startup script installation in order to save myself a lot of error-prone point-and-click manual labor. I see that when one uses gpedit.msc to create a local startup script, information about the script gets stored in the registry here: HKLM\Software\Policies\Microsoft\Windows\System\Scripts\Startup However, if you create such a script and then delete its registry key, the script will remain listed in the local Group Policy editor; as is so often the case in Windows, apparently there is more going on there than meets the eye. This leads me to question whether it's safe to manually add subkeys for new startup scripts here (I wouldn't want my script to be overwritten by later changes made using the local Group Policy editor, for instance)... Another option that's occurred to me is to create an item in the Task Scheduler configured to run at system startup. However, my concerns there are twofold: Can this be automated any more easily? For instance, the at command doesn't appear to let you schedule a task for system startup, and WMI's Win32_ScheduledJob interface looks unreliable (it fails to show any of my currently scheduled tasks, for one thing). Would I be able to prevent users from logging in until the scheduled startup task is completed, as can be done with "normal" Windows startup scripts? Thanks in advance for any suggestions, I've been banging my head against this one for a bit...

    Read the article

  • Colour table cells in Microsoft Word after mail merge

    - by James
    I have an Excel spreadsheet of student data. For each of 30 topics, students are traffic lighted R, A or G (for red, amber, green) in the spreadsheet. I am mail merging individual result print-outs in Word 2010. However, rather than printing the letter R/A/G next to each topic, I would rather change the background colour of the cell to that colour. How can I do this? Is there an option with merge fields or can it be done with a macro (please provide sample code if so - I don't have experience with macros!)

    Read the article

  • Monitor mode 802.11 captures on OSX

    - by Mike A
    I'm trying to determine the difference between capturing 802.11 frames in the following ways on OSX (10.8.5). It's a bit esoteric, but I use "Option 2" to capture frames for later analysis, and am wondering if I'm missing something. Option 1: use "airportd": $sudo /usr/libexec/airportd en0 sniff Option 2: use "airport" followed by tcpdump: sudo /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport --channel= sudo tcpdump -I -P -i en0 -w /tmp/capture.pcap (or alternatvely eliminate the -w and watch packets real-time). From what I can tell: Both commands, according to the wifi icon on OSX, put the interface into 'monitor' mode. Both commands output a pcap file that is readable in both wireshark/tcpdump & Eye PA. Both commands appear to capture management, control and data frames. The rub: Option 1 disconnects you from the network. This is expected, when putting an interface into 'monitor' mode. Option 2 does NOT disconnect you, provided you've set the channel to the same channel your currently connected to. This has a distinct advantage of keeping your connection up while capturing in monitor mode. My question: Option 2 does not seem like it should work, or more specifically, it does not seem like I should be able to remain connected while also capturing frames in monitor mode. On a wired NIC, you can be 'promiscuous' and still send frames, though I didn't think the same was true for wireless NIC. I'm questioning the validity of capturing frames w/ Option 2?

    Read the article

  • How to prevent Spell checking code in MS Office?

    - by Aaron
    We use MS Office. Outlook for emails, Word for some documentation and I use OneNote a lot for my own note taking. What bugs me is when I drop some code or use key words or even camel case into these apps the spell checking picks them up and I have red squiggles everywhere. Ignore is pretty much useless, so either I have to turn off Spell Check altogether start adding these to the custom dictionary. What would be good is if I can use the Set Language function to mark a whole block of text to just not be spell checked. Has anyone found a nice solution to this or do you know of a blank dictionary is best to use? I found using "Mohawk" kind of does that... might just use that for now. Maybe create a macro to switch between them.

    Read the article

  • What are these? Are they broken?

    - by Chris Nielsen
    Please excuse the poor image quality: What are the components that I've circled in red? The ones on the left look whole and solid. The ones on the right have cracked tops, and although this picture doesn't show it, there are small brown threads coming out of the top. Are the cracked ones broken, or is that supposed to happen? If they ARE broken, is this something I should worry about? This is a video card, and it appears to be fully functional: I'm using it while writing this post.

    Read the article

  • Windows - Force Wi-Fi to N mode

    - by Frederick Marcoux
    I bought a month ago the D-Link DWA-160 Xtreme N Dual Band USB Adapter and I wonder about the speed. I have a 60Mbps but the speed is never above 300Kbps when I browse Internet or download something. Even from Microsoft or Apple (the fastest server I found). Now on Windows 8, we can see the Wi-Fi stats in Task Manager, there they are: Notice the red rectangle. The signal is 3/5 and I'm about 5 meters far from my router. An Apple Time-Capsule. Also, the connection type is 802.11g, I want N. I made this config in my Device Properties: Does anyone figured out to force the 802.11n in Windows? (Windows 8 preferably)

    Read the article

  • Annotating Graphs From Textual Data

    - by steven
    I've got a graph that was generated from a data set that contains: (date, value, annotation) The annotation is a constant value [its either there or is blank] and I would like to add in the third bit of data into the graph I have. An example of this is in the image. The blue line is a graph of the (date, value) graph, and I would like to add in the red dots as graphing (date, annotation@value). Is there an easy way to do this in excel, without having to modify the appearance of the data?

    Read the article

  • Ganglia divide colors by rolles

    - by com
    Sorry for a silly question I am still newbie to Ganglia. In Ganglia I control few important metrics for mysql (seconds behind master and etc.). In addition I have few bunches of mysql servers (every bunch has it's own tasks, but all of the bunches should be tested for seconds behind master). I am interested if this possible to show all metrics on the one page with different colors to different bunches. Right now in metric "seconds behind master" I see all mysql servers with metric "seconds behind master" with colors to different states (red is critical, gray is ok). Can I set a color to a graph according to it's bunch? Thanks!

    Read the article

  • ISA caching with no cache-related info in response header

    - by Mike M. Lin
    From the documentation, I can't figure out what criteria an ISA server uses to figure out if a cached file is valid when no cache-related info is in the response header. Let's say I got this header in my response on Thu, 13 Jan 2011 18:43:35 GMT: HTTP/1.1 200 OK Date: Thu, 13 Jan 2011 18:43:35 GMT Server: Apache/2.2.3 (Red Hat) Content-Language: en X-Powered-By: Servlet/2.5 JSP/2.1 Keep-Alive: timeout=15 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/html; charset=ISO-8859-1 There's no cache directive, no last-modified field, no expires field. How will the ISA server decide for how long to cache this response?

    Read the article

  • Webcam becomes "Unknown Device" after Windows Messenger 2011 is installed

    - by Boris
    I have Sony VAIO VGN-NS290J laptop. I installed Windows 7 Ultimate 64-bit. I was able to find drivers for all hardware without any problems. Recently, I installed Microsoft Windows Live Essentials 2011, i.e. Windows Live Messenger 2011. Ever since that application is running on my computer, my webcam is not recognized by the OS any more. It is listed as the "Unknown Device" and placed in the Universal Serial Bus controllers group in the Device Manager. There don't seem to be any drivers for this webcam. It's a standard Sony Motion Eye web camera and Sony does not offer any drivers for it. There is one application to download that utilizes the camera, but there are no drivers (and the system is showing the same behavior regardless of the presence of the application). It happens from time to time that the webcam becomes recognized by the OS again, after a couple of restarts; but not always. Then it becomes unknown again. I am absolutely positive that this issue is caused by the Windows Live Messenger 2011, because same symptoms caused the same effects before. I wish to be able to continue to use this software, but also to use my webcam. I was wondering if anyone had a similar issue and if there is a way to fix it. Thanks for all the help, I appreciate it. Update: I have discovered a pattern - if the camera goes astray, restarting the machine does not bring it back; but switching the computer off and turning it back on does. Every time! This is getting super complicated :)

    Read the article

  • How to configure sudoers to always keep LD_LIBRARY_PATH envrionment variable?

    - by Yanick Girouard
    No matter what I try, it seems that the LD_LIBRARY_PATH environment variable is not kept after I run a command with sudo. The only way I managed to have it stick, is to prefix my sudo command with LD_LIBRARY_PATH=/the/path whenever I call it from the command-line, but I would like to not have to do this every time. It seems the env_keep option ignores this variable, and so does the exempt_group option. My %group currently has ALL=(ALL) NOPASSWD:ALL as its access in sudoers. I would like this specific environment variable to be kept for any command I run. How can I do this? My server is running Red Hat Enterprise Linux 5.7.

    Read the article

  • OpenOffice Calc - Highlighting the higest value in a column

    - by cornjuliox
    So I've got this spreadsheet open using OpenOffice Calc (ver 3.3.0) and its set up a little like this: A B C D 1.name quantity price total 2.foo 10 10 100 3.bar 20 6 120 4.red 30 7 210 Each cell in the "total" column is obtained by multiplying the two cells to the left of it, and what I'm trying to do is to get it so that Calc highlights the highest value in the total column (even better if it could highlight the entire row). I've tried using MAX(D1:D4) in the Conditional Formatting section, but it highlights multiple values. How do I get it to highlight just the highest value?

    Read the article

  • "No such file or directory" when the file is there

    - by Arlaud Agbe Pierre
    I'm trying to run XPDF on a linux (probably red hat) OVH shared server. I've managed to have ftp ssh access and put the 64 bits binaries onto a folder. The problem is : even though the files are there with the right permissions, if I try running it I'm getting a file not found problem (I'm thinking about a missing link..) Long story short : jurisedi@ssh1:~/xpdf$ file pdftotext pdftotext: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), stripped jurisedi@ssh1:~/xpdf$ ./pdftotext -ovh: jurisedi@ssh1:~/xpdf$: No such file or directory Any ideas ?

    Read the article

  • jQuery gallery scrolling effect with ease

    - by Sebastian Otarola
    So, I got this page from a friend and I think the gallery is amazingly done. Too bad it's in Flash ; http://selected.com/en/#/collection/homme/ Now, I'm trying to replicate the effect with jQuery. I've made all the loco searches on google one could think of. Zooming the picture is not a problem, the problem lies within the scrolling, how they come together at the ease part. I'm looking for solution in how to make the thumbnail animate when you scroll the page, they drag behind and infront of each other in a very subtle way - I've got (With a lot of help from Whirl3d in the jQuery-irc channel) this for the scrollup/down part of the mouse but the scrolling goes haywire; I Thought I post it here where I've come many times to get answers to a lot of questions and code-errors. This is my first post in stackoverflow and I know you guys are geniuses! Give it a shot! Thanks in advance! jQuery Part $(document).ready(function() { var fronts=$(".front"); var backs=$(".back"); var tempScrollTop, currentScrollTop = 0; $(document).scroll(function () { currentScrollTop = $(document).scrollTop(); if (tempScrollTop < currentScrollTop) { //Scroll down fronts.animate({marginTop:"-=100"},{duration:500, queue:false, easing:"easeOutBack"}); backs.animate({marginTop:"-=100"}, {duration:300, queue:false, easing:"easeOutBack"}); console.log('scroll down'); } else if (tempScrollTop > currentScrollTop) { //scroll up fronts.animate({marginTop:"+=100"},{duration:500, queue:false, easing:"easeOutBack"}); backs.animate({marginTop:"+=100"}, {duration:300, queue:false, easing:"easeOutBack"}); console.log('scroll up'); } tempScrollTop = currentScrollTop ;}) ;}); The HTML <html> <head> <link rel="stylesheet" type="text/css" href="style.css" /> <script type="text/javascript" src="http://code.jquery.com/jquery-1.7.2.min.js"></script> <script type="text/javascript" src="http://www.paigeharvey.net/assets/js/jquery.easing.js"></script> <script type="text/javascript" src="gallery.js"></script> <title>Parallax testing image gallery</title> </head> <body> <div class="container"> <div class='box front'>First Group</div> <div class='box back'>First Group</div> <div class='box front'>First Group</div> <div class='box back'>First Group</div> <br style="clear:both"/> <div class='box front'>Second Group</div> <div class='box back'>Second Group</div> <div class='box front'>Second Group</div> <div class='box back'>Second Group</div> <br style="clear:both"/> <div class='box front'>Third Group</div> <div class='box back'>Third Group</div> <div class='box front'>Third Group</div> <br style="clear:both"/> </div> </body> And finally the CSS Part .container {margin: auto; width: 410px; border: 1px solid red;} .box.front{border: 1px solid red;background-color:Black;color:white;z-Index:500;} .box.back {border: 1px solid green;z-Index:300;background-color:white;} .box {float:left; text-align:center; width:100px; height:100px;}

    Read the article

  • Sound problems in Windows 7

    - by Plastkort
    hi! I hope I reached the correct forum for this question. I have a media computer with a third party audio card (Soundblaster audigy SE) I use a coaxial digital audio cable connected to a Onkyo TX SR508. if I use normal audio, the sound seems very low, I have to set volume atleast to 62 in my amplifier to hear anything, however if I set digital SPDIF I have no means of controlling the audio volume from the PC (only from the amplifier) and this can be nasty if I toggle between movies that uses Digital AC3/THX and movies wihtouth, if I look at movies capable of AC3 the volume gets VERY loud if amp is set to 62, 32 is more than enough volume when using passthrough. so this bothers me is how can I get the same amount of volume with or without digital output? I tried also other soundcards, internal red light Digital audio cable... if I connect to my television I get ok sound on any sound source via HDMI... help :)

    Read the article

  • Fujitsu Siemens V6535 laptop doesn't wake up - crash when going into standby?

    - by marc
    I'm having trouble with my laptop (Fujitsu Siemens model V6535). It runs Windows 7, and after I upgraded from Vista I've noticed something that makes me really angry. When my laptop goes into Standby, the power LED changes to red and starts blinking (standby mode). When I push the power button to wake it up it, the blinking LED changes to green but nothing else happens. Nothing on the display, no HDD sound. When I press the power button for a few seconds and then try turn it on again, it doesn't display anything. I have to unplug the charger, shut it off, and power it on again without the power cable. Then it starts working. A few days ago I upgraded the BIOS to the newest version, but it doesn't help. Does anyone have any idea what can be wrong?

    Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >