Search Results

Search found 4860 results on 195 pages for 'sudo petruza'.

Page 110/195 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• Only recognizes one partition from multi partitions SD card

  - by Jay Ngo

  Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

  Read the article

• How can I switch memory modules to 1600 Mhz?

  - by Salvador

  Some months ago I bought 4 Memory modules of 4GB DDR3 1600 KINGSTON HYPERX. The official Kingston manual says: *This module has been tested to run at DDR3-1600 at a low latency timing of 9-9-9-27 at 1.65V.The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9. I cannot find which is the real speed of my memory modules. I normally get from several tools that the real speed is 1333 Mhz srs@ubuntu:~$ sudo dmidecode -t memory # dmidecode 2.9 SMBIOS 2.6 present. Handle 0x005D, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 32 GB Error Information Handle: 0x005F Number Of Devices: 4 Handle 0x005C, DMI type 17, 28 bytes Memory Device Array Handle: 0x005D Error Information Handle: 0x0060 Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: ChannelA-DIMM0 Bank Locator: BANK 0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 1333 MHz (0.8 ns) Manufacturer: Kingston Serial Number: 07288F23 Asset Tag: 9876543210 Part Number: 9905403-439.A00LF How can I switch memory modules to 1600 Mhz?

  Read the article

• How to stop fan running always on Asus P8P76LE motherboard with ATI Radeon HD6900

  - by Chris Good

  I'm using Ubuntu 12.04 LTS. I'm not sure if it is the CPU (i7) fan or the video card fan. I've tried using lm-sensors & fancontrol sudo sensors-detect Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `w83627ehf': * ISA bus, address 0x290 Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: # Chip drivers coretemp w83627ehf Like many people, I'm also getting error: /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Here is the output of sensors: # sensors radeon-pci-0100 Adapter: PCI adapter temp1: +71.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 1: +40.0°C (high = +80.0°C, crit = +98.0°C) Core 2: +43.0°C (high = +80.0°C, crit = +98.0°C) Core 3: +42.0°C (high = +80.0°C, crit = +98.0°C) I'm hoping some-one has already solved this for my configuration because this seems to be a problem for many people and there are many different suggestions.

  Read the article

• How can I install a package without installing some dependencies?

  - by Alex

  I'm trying to install the package LaTeXila, and the output looks like this: $ sudo apt-get install latexila --no-install-recommends Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: latexila-data latexmk luatex tex-common texlive-base texlive-binaries texlive-common texlive-doc-base texlive-latex-base Suggested packages: rubber texlive-latex-extra debhelper Recommended packages: texlive texlive-latex-recommended texlive-luatex lmodern texlive-latex-base-doc The following NEW packages will be installed: latexila latexila-data latexmk luatex tex-common texlive-base texlive-binaries texlive-common texlive-doc-base texlive-latex-base 0 upgraded, 10 newly installed, 0 to remove and 0 not upgraded. Need to get 29.3 MB of archives. After this operation, 74.5 MB of additional disk space will be used. Do you want to continue [Y/n]? I don't want to install the texlive packages. I've installed texlive manually from http://www.tug.org/texlive/. Any suggestions?

  Read the article

• Ubuntu cannot boot after kernel upgrade

  - by andrey

  Today I have upgraded the Linux kernel (using the Update Manager), from 3.0.0.16-generic to 3.0.0.17-generic. However, after this update, Ubuntu 11.10 cannot boot anymore. I see a strange message which says "initclt: event failed". And if I press [Ctrl]+[Alt]+[F1] it still allows me to log into the text mode. But if I type sudo lightdm, I cannot log into the graphical mode. However, if I choose to boot an older kernel from the GRUB, Ubuntu boots correctly. What should I do, in order to be able to boot the system using the new kernel?

  Read the article

• gstreamer vaapi problem

  - by squallbayu

  I installed gstreamer-vaapi from this PPA : ppa:guido-iodice/video sudo apt-get install gstreamer0.10-vaapi libgstvaapi-x11-0 libgstvaapi0 but, if I run totem movie player (via terminal) it's show this error : (totem:3383): GLib-GObject-WARNING **: g_object_set_valist: object class 'TotemScrsaver' has no property named 'reason' (totem:3383): GLib-GObject-WARNING **: value "10752000" of type 'guint' is invalid or out of range for property 'connection-speed' of type 'guint' libva: libva version 0.31.0 Xlib: extension "XFree86-DRI" missing on display ":0.0". libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/dri/nvidia_drv_video.so libva error: /usr/lib/dri/nvidia_drv_video.so init failed libva: va_openDriver() returns -1 Segmentation fault It's seems I get wrong nvidia_drv_video.so. What should I do? If I uninstall it, it's work fine, but I want to use this vaapi backend for my video decoding via GPU while I run gstreamer based apps. PS : I use Ubuntu Lucid 64bit and MSI CR 400 Notebook : Intel Core 2 Duo Nvidia 8200M

  Read the article

• "/usr/bin/ld: cannot find -lboost_python-mt" error when installing pycuda 2011.2.2

  - by maxrider11

  I am installing pycuda2011.2.2 on ubuntu 11.10, but can't complete it. When i do pycuda-2011.2.2 $ make -j 4 I get this error: /usr/bin/ld: cannot find -lboost_python-mt , /usr/bin/ld: cannot find -lcuda I got 1 exact problem match in google search and solution as well : $ sudo ln -s /usr/lib/libboost_python-mt-py26 /usr/lib/libboost_python-mt But booooom, My problem doesn't vanish. It makes me wonder that why there are no relavant results in google search, as if only I have this problem. What is wrong ? Any help is appreciated. Thanks,

  Read the article

• How to make Jetty webserver listen on port 80?

  - by Jonas

  I would like to use Jetty as a webserver. I have edited the configuration file at /etc/default/jetty and set: # change to 0 to allow Jetty start NO_START=0 # Listen to connections from this network host # Use 0.0.0.0 as host to accept all connections. JETTY_HOST=0.0.0.0 Now I can reach the Jetty webserver at http://192.168.1.10:8080 but I would like to have Jetty listening on port 80. I have tried this setting in the same configuration file: # The network port used by Jetty JETTY_PORT=80 and then restart Jetty with sudo service jetty restart but it doesn't work. How can I change so that the Jetty webserver is listening on port 80?

  Read the article

• Low graphics mode on Ubuntu 12.04 with Intel Graphics

  - by NightShadeQueen

  When I boot, my computer just tells me it can't detect graphic card (or something else) settings and it has to use the low graphics mode. Then it gives me four choices, but doesn't let me choose any of them. I can get my computer to boot by going to some sort of terminal mode and then typing sudo gdm. The other graphics manager I have is lightdm. I originally had the nVidia propriety driver, and I've tried bumblebee. Mobile Intel Graphics Media Accelerator 4500M is my graphics card. Is there any way to fix this so I can use lightdm again?

  Read the article

• Changing permissions on serial port

  - by Terrik

  I'm using the Arduino IDE in Ubuntu, and am having issues with the serial port. It has worked in the past, but for reasons that may be unnecesary, I felt the need to change the ownership of some of the files from root ownership to my users ownership. This made the IDE work correctly, but I lost the ability to use the correct serial port. In the dev folder, the port I need is listed as permission 166. Someone (who is no longer in the area to help me) swapped the permissions to 666, which made it all work gloriously. However, it reverted back as soon as I restarted my computer, and if I now try to use the command: sudo chmod 666 ttyACM0 nothing happens. No error messages, but no permission change either. How can I change it, and how can I get it to change permanently. I apologize if this question is overly simplistic or unclear, I'm an ubuntu noob, and I wouldn't begrudge feedback!

  Read the article

• Running 32-bit Firefox with sun-jre in 64-bit Ubuntu

  - by rojanu

  I am trying to run juniper networks connect program to vpn into work and it only works on 32bit sun jre. All the things I have found with google failed so far. I can't use any scripts, like madscientists, as part of the authentication I need to provide some random characters from a grid. So to isolate this 32bit app install to a corner, I downloaded firefox and jre and unpack them to /opt. I run firefox with sudo as Juniper asks for root password. Here is Firefox plugins folder /ot/firefox32/plugins# ls -la total 8 drwxr-xr-x 2 root root 4096 Mar 11 00:57 . drwxr-xr-x 11 root root 4096 Mar 10 23:48 .. lrwxrwxrwx 1 root root 49 Mar 11 00:57 libnpjp2.so -> /opt/java/32/jdk1.6.0_31/jre/lib/i386/libnpjp2.so Firefox lists sun jre but when check it with "http://java.com/en/download/installed.jsp" it either can't detect java or Firefox freezes Any Ideas? Thanks

  Read the article

• Ubunti 12.10 wake on lan not working with Realtek 8139

  - by f.cipriani

  My pc doesn't wake up when receiving a magic packet from a pc connected to the same router. ethtool: fcipriani@ubuntu:~$ sudo ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes I have enabled all the wake up features in my bios, and I have verified the magic packet gets to the pc. I suspect the main problem is that the NIC light is completely turned off after the shutdown, but even after spending a lot of time researching I can't understand if this is a limit of my network card, my mobo, or something in the OS which needs to be configured correctly in order to leave the NIC in stand by mode with the light flashing. the NIC is Realtek 8139, the motherboard Asus P5L13L-X

  Read the article

• apt-get update bzip2 errors

  - by Tejas Kale

  I installed Ubuntu 11.10 today on my Lenovo w500. After that when i tried running sudo apt-get update This is the error i am getting. Get:117 http://ftp.jaist.ac.jp oneiric-security/universe TranslationIndex [73 B] 99% [48 Sources bzip2 0 B] [22 Sources bzip2 5,294 kB] 1,983 kB/s 0s bzip2: Compressed file ends unexpectedly; perhaps it is corrupted? *Possible* reason follows. bzip2: Inappropriate ioctl for device Input file = (stdin), output file = (stdout) It is possible that the compressed file(s) have become corrupted. You can use the -tvv option to test integrity of such files. You can use the `bzip2recover' program to attempt to recover data from undamaged sections of corrupted files. I found the following similar question : Errors while updating Ubuntu 11.10 , But the solutions mentioned ( changing the download server, running apt-get clean, apt-get autoclean) and have also tried removing the /var/cache/apt/archives/lists direcotry. As a result of this, I am unable to install any new packages.

  Read the article

• "Please ensure you have JAVA_HOME points to JDK rather than JRE" message

  - by Alex Malex

  I have java installed aaa@ubuntu:~$ whereis java java: /usr/bin/java /usr/bin/X11/java /usr/local/java /usr/share/java aaa@ubuntu:~$ whereis javac javac: /usr/bin/javac /usr/bin/X11/javac and etc/profile JAVA_HOME=/usr/local/java/jdk1.7.0_17 PATH=$PATH:$HOME/bin:$JAVA_HOME/bin JRE_HOME=/usr/local/java/jre1.7.0_17 PATH=$PATH:$HOME/bin:$JRE_HOME/bin export JAVA_HOME export JRE_HOME export PATH However, when I run Android Studio, it says: tools.jar in not in Android Studio classpath. Please ensure you have JAVA_HOME points to JDK rather than JRE. How do I fix it? update sudo update-alternatives --get-selections | grep ^java java manual /usr/local/java/jre1.7.0_17/bin/java javac manual /usr/local/java/jdk1.7.0_17/bin/javac javaws manual /usr/local/java/jre1.7.0_17/bin/javaws java -version java version "1.7.0_17"

  Read the article

• Unable to set default gateway

  - by GrandMasterFlush

  I'm running Ubuntu server via Hyper-V and have successfully installed it but seem unable to ping the server or ping any other machines on the network from the server. After doing a bit of reading I've noticed that the default gateway isn't set but when I try and set it I keep getting error messages which I can't understand. From this article I've tried ip route add default via 10.0.10.200 Which reports: RTNETLINK answers: Operation not permitted If I try running it prefixed with sudo but it reports: `RNETLINK answers: No such process I've editted /etc/network/interfaces but when I start the machine and type netstat -nr there is nothing listed. Can anyone tell me where I'm going wrong please? EDIT : /etc/network/interfaces contains: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp

  Read the article

• Create shortcut for PHP

  - by Daniel

  I have XAMPP installed and my PHP is: /opt/lampp/bin/php-5.3.8 Every time I need to execute a PHP file I need to do this: /opt/lampp/bin/php-5.3.8 testando.php Is there another way to execute it besides using symbolic link? I did this on /etc/init.d/: sudo ln -s /opt/lampp/bin/php-5.3.8 php Why when I need to run PHP I have to do this ./php instead of just php? And is there a way to do this without the ./? Like it was installed via apt-get?

  Read the article

• Is it possible to install ZSNES Emulator from default software sources?

  - by Mike L

  I can find it listed when I search for "zsnes" in the Ubuntu Software Center but it doesn't have the "Install" button. If I click the "More information" button I'll get a "package not found" message. Synaptic can't find this package either. (from user @REJ) I have Natty 64bit. When I run sudo apt-get install zsnes it gives the following output: Reading package lists... Done Building dependency tree Reading state information... Done Package zsnes is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'zsnes' has no installation candidate

  Read the article

• ubuntu cobbler server - importing distros

  - by Stu2000

  I setup and fully configured ubuntu-12.04-server machine with cobbler/dhcp running in about 10 minutes (compared to taking over an hour on centos 5.8). I discovered the cobbler import which appears to be useful. Does this remove the need to use a cobbler distro add? whenever I run a cobbler report after a successful import of ubuntu desktop iso: sudo cobbler import --name=Ubuntu --path=/mnt --breed=debian task started: 2012-12-13_163245_import task started (id=Media import, time=Thu Dec 13 16:32:45 2012) Found a debian/ubuntu compatible signature: pool adding distros avoiding symlink loop avoiding symlink loop avoiding symlink loop associating repos associating kickstarts *** TASK COMPLETE *** I just get the following (nothing): distros: ========== profiles: ========== systems: ========== repos: ========== images: ========== mgmtclasses: ========== packages: ========== files: ========== I was rather hoping that I wouldn't have to do the traditional copying of all files in /mnt to a new /distro directory and then perform a cobbler distro add --initrd=/path/to/inird --kernel=/path/to/kernel Maybe I am mistaken about what the import actually does for me. If someone could elaborate on what the import is actually for please do.

  Read the article

• Package information was last updated 59 days ago even though Ubuntu is up to date

  - by Luuz

  I'm using ubuntu 11.10 and in the update manager I have a message that says package information last updated 59 days ago press the check button to check for software updates I do that, but i'm up to date. I checked other threads with this same problem, and saw i should do sudo apt-get update in a terminal to see which repository is not up to date and when I did, I got this message: Failed to fetch http://extras.ubuntu.com/ubuntu/dists/oneiric/Release Then I checked for this repository in software sources but couldn't find this specific one. In my /etc/apt/sources.list.d I have only one line: deb http://archive.canonical.com/ubuntu oneiric partner #Added by software-center So now I don't know what to do more. Should I upgrade to 12.04 and will it solve my problem? I wouldn't want to upgrade if there is a problem in the last version but I don't know much about Ubuntu so, can anyone help me please? Thank you!!

  Read the article

• Wifi not working for Ubuntu 14.04

  - by user286975

  I have installed the Ubuntu 14.04 on Dell Vostro 2520 laptop. Wifi is not working after installation. Tried several methods to install but nothing happens. Vostro-2520:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no Vostro-2520:~$ iwconfig usb0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. The hardware is Broadcom 802.11 bcm43142. Please help to solve this issue.

  Read the article

• Got back Hibernation option, but cannot resume from Hibernate

  - by harisibrahimkv

  In my Ubuntu 12.04, the hibernation option was working well and fine. However, I installed Debian on another partition recently and when I again tried to boot to Ubuntu, I got a message on the boot splash screen saying : The disk drive for / is not ready yet or not present. Continue to wait; or press s to skip mounting or M for manual recovery. After logging into Ubuntu, I find that my hibernation option has gone missing. Is there anyway to recover the hibernation option? EDIT: I solved the disk drive problem and I got the hibernation option back. When I did "sudo pm-hibernate", my system went to hibernation. However, when powering on again, it booted up normally and thus there was no effect of hibernation. How can this be rectified? EDIT1: System - Lenovo ideapad s10-2. EDIT2: /etc/fstab

  Read the article

• problem with grub-efi

  - by Jesper

  I am installing ubuntu on my MacBook, following the instructions here: http://www.rodsbooks.com/ubuntu-efi/index.html Everything has gone well so far. But I have now come to number 19. The cd with GRUB2 is in the drive, but when I type 'sudo apt-get install grub-efi' it says: package grub-efi is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: grub2-common grub-common The Grub iso I downloaded and burned was this one: http://forja.cenatic.es/frs/download.php/1381/super_grub_disk_hybrid-1.98s1.iso

  Read the article

• Only recognizes one of multiple partitions on SD card

  - by Jay Ngo

  Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

  Read the article

• Proper fstab entry to mount a samba share in 12.04

  - by JPbuntu

  I am a little confused on the proper fstab entry for a samba share in Ubuntu 12.04 I can get the drive to mount manually by using: sudo mount -t cifs //192.168.2.2/raid_drive /mnt/homeserver -o username=jon,password=password So I tried putting this in fstab: //192.168.2.2/raid_drive /mnt/homeserver cifs username=jon,password=password,iocharset=utf8,mode=0777,dir_mode=07??77 0 0 Which gives me this error in syslog: kernel: [ 2217.925354] CIFS: Unknown mount option mode kernel: [ 2217.936345] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3 This guide says to use smbfs although I believe smbfs is deprecated? What is a common fstab configuration for a samba share in Ubuntu 12.04? EDIT: Using the accepted answer below I was initially getting this error message (from dmesg): [ 45.520883] CIFS VFS: Error connecting to socket. Aborting operation [ 45.520990] CIFS VFS: cifs_mount failed w/return code = -115 although it turns out this was due to network connectivity issues, and not related to improper fstab entry.

  Read the article

• Where did my free space go?

  - by Ari B. Friedman

  I have a storage drive (2TB) and an OS drive (90GB SSD). I've run out of space on the OS drive: /$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb1 72G 72G 0 100% / udev 5.9G 12K 5.9G 1% /dev tmpfs 2.4G 1.2M 2.4G 1% /run none 5.0M 0 5.0M 0% /run/lock none 5.9G 428K 5.9G 1% /run/shm /dev/sda1 1.9T 639G 1.2T 37% /media/StorageDrive So be it. But when I attempt to figure out where the space has gone, I cannot find it anything remotely approaching the capacity of the drive: /$ sudo du -h -d 1 du: cannot access `./media/StorageDrive/home/ari/.gvfs': Permission denied 675G ./media 2.3G ./var 0 ./proc 7.0M ./tmp 27M ./boot 4.0K ./lib64 12K ./dev 44M ./home 16K ./lost+found 8.0M ./sbin 223M ./lib 4.0K ./selinux 1.4M ./run 140K ./root 8.8M ./bin 4.0K ./mnt 38M ./etc 8.0K ./srv 4.8G ./usr 65M ./opt 0 ./sys 682G . Note the difference between the total (682G) and the mounted drives in /media (675G) is only about 9G. How are 72G being used? Where is this dark matter hiding?

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >