Search Results

Search found 6637 results on 266 pages for 'usr'.

Page 110/266 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• nginx php-fpm trouble

  - by Patrick

  Hello, we're using php-fpm and have trouble getting the scripts to work if we change the 'root' value in nginx.conf. location ~ \.php$ { root /usr/share/nginx/html ; If we change that root to point to other directory, even if it's /usr/share/nginx/html/crap, it wouldn't work. The directory exists of course. It's like it can read the file in that directory, but not execute it. I've checked all file permissions. Anyone has any idea?

  Read the article

• apache not starting in vagrant vm

  - by jimmyjambles

  I used Puphpet.com to create a Vagrant VM to be used for web development. The problem I am having is that the VM cannot start apache on boot. $ sudo /etc/init.d/apache2 start * Starting web server apache2 * * The apache2 configtest failed. Output of config test was: apache2: Syntax error on line 36 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/mods-enabled/authz_default.load: Cannot load /usr/lib/apache2/modules/mod_authz_default.so into server: /usr/lib/apache2/modules/mod_authz_default.so: cannot open shared object file: No such file or directory Action 'configtest' failed. The Apache error log may have more information. the system is ubuntu 12, not sure what modifications I have to make to the puppet config to fix the problem.

  Read the article

• Address already in use - Amazon AWS

  - by Peter

  I've run into a really weird issue. I was debugging a server 500 error script on our EC2 instance and found that we didn't have ioncube loaders installed. So I went to go install them and I created a new file at /etc/php.d/zend.ini and initially I inserted the value of extension=/usr/local/ioncube/ioncube_loader_lin_5.3.so and restarted httpd at which point it told me: The ionCube Loader is a Zend-Engine extension and not a module Please specify the Loader using 'zend_extension' in php.ini PHP Fatal error: Unable to start ionCube Loader module in Unknown on line 0 So I changed the contents of zend.ini to zend_extension=/usr/...etc. Now when I attempt to restart httpd I get this error: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs I can't even run /etc/init.d/httpd stop without it erroring. I've since removed zend.ini to see if that's what caused it and it doesn't seem to be. Any ideas?

  Read the article

• Puppet and launchd services?

  - by Joel Westberg

  We have a production environment configured with Puppet, and want to be able to set up a similar environment on our development machines: a mix of Red Hats, Ubuntus and OSX. As might be expected, OSX is the odd man out here, and sadly, I'm having a lot of trouble with getting this to work. My first attempt was using macports, using the following declaration: package { 'rabbitmq-server': ensure => installed, provider => macports, } but this, sadly, generates the following error: Error: /Stage[main]/Rabbitmq/Package[rabbitmq-server]: Could not evaluate: Execution of '/opt/local/bin/port -q installed rabbitmq-server' returned 1: usage: cut -b list [-n] [file ...] cut -c list [file ...] cut -f list [-s] [-d delim] [file ...] while executing "exec dscl -q . -read /Users/$env(SUDO_USER) NFSHomeDirectory | cut -d ' ' -f 2" (procedure "mportinit" line 95) invoked from within "mportinit ui_options global_options global_variations" Next up, I figured I'd give homebrew a try. There is no package provider available by default, but puppet-homebrew seemed promising. Here, I got much farther, and actually managed to get the install to work. package { 'rabbitmq': ensure => installed, provider => brew, } file { "plist": path => "/Library/LaunchDaemons/homebrew.mxcl.rabbitmq.plist", source => "/usr/local/opt/rabbitmq/homebrew.mxcl.rabbitmq.plist", ensure => present, owner => root, group => wheel, mode => 0644, } service { "homebrew.mxcl.rabbitmq": enable => true, ensure => running, provider => "launchd", require => [ File["/Library/LaunchDaemons/homebrew.mxcl.rabbitmq.plist"] ], } Here, I don't get any error. But RabbitMQ doesn't start either (as it does if I do a manual load with launchctl) [... snip ...] Debug: Executing '/bin/launchctl list' Debug: Executing '/usr/bin/plutil -convert xml1 -o /dev/stdout /Library/LaunchDaemons/homebrew.mxcl.rabbitmq.plist' Debug: Executing '/usr/bin/plutil -convert xml1 -o /dev/stdout /var/db/launchd.db/com.apple.launchd/overrides.plist' Debug: /Schedule[weekly]: Skipping device resources because running on a host Debug: /Schedule[puppet]: Skipping device resources because running on a host Debug: Finishing transaction 2248294820 Debug: Storing state Debug: Stored state in 0.01 seconds Finished catalog run in 25.90 seconds What am I doing wrong?

  Read the article

• Init script & the green [ OK ]

  - by Lord Loh.

  I am trying to install fast-cgi for nginx on an EC2 instance. I followed the steps explained here, but that is meant for Debian and does not work out of the box for a red-hat based system. I modified the script a bit to look like - #!/bin/bash ### BEGIN INIT INFO # Provides: php-fcgi # Required-Start: $nginx # Required-Stop: $nginx # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: starts php over fcgi # Description: starts php over fcgi ### END INIT INFO . /etc/rc.d/init.d/functions (( EUID )) && echo .You need to have root priviliges.. && exit 1 BIND=/tmp/php.socket USER=nginx PHP_FCGI_CHILDREN=15 PHP_FCGI_MAX_REQUESTS=1000 PHP_CGI=/usr/bin/php-cgi PHP_CGI_NAME=`basename $PHP_CGI` PHP_CGI_ARGS="- USER=$USER PATH=/usr/bin PHP_FCGI_CHILDREN=$PHP_FCGI_CHILDREN PHP_FCGI_MAX_REQUESTS=$PHP_FCGI_MAX_REQUESTS $PHP_CGI -b $BIND" RETVAL=0 start() { echo -n "Starting PHP FastCGI: " #ORIGINAL LINE #daemon $PHP_CGI --quiet --start --background --chuid "$USER" --exec /usr/bin/env -- $PHP_CGI_ARGS #MODIFIED LINE daemon --user=$USER $PHP_CGI -b $BIND& RETVAL=$? echo [ $RETVAL -eq 0 ] && touch /var/lock/subsys/php-fcgi #echo "$PHP_CGI_NAME." } stop() { echo -n "Stopping PHP FastCGI: " killall -q -w -u $USER $PHP_CGI RETVAL=$? echo "$PHP_CGI_NAME." rm /var/lock/subsys/php-fcgi } case "$1" in start) start ;; stop) stop ;; restart) stop start ;; *) echo "Usage: php-fastcgi {start|stop|restart}" exit 1 ;; esac exit $RETVAL The problem I have now is - service php-fcgi start keeps the shell blocked. If I run service php-fcgi start & and then ps aux, I see the php-cgi process running bound to the socket. I see the start command stop only when I execute service php-fcgi stop. How do I solve this blocking issue? I have tried adding an & at the end of the line spawning the daemon. But other scripts do not seem to be doing this. This is the most complicated script I am attempting to modify yet :-( How do I get the script to display the green [ OK ]? I checked scripts like httpd and saw that all they were doing was something as shown below. But I never see a green [ OK ] when I execute php-fcgi. I also discovered that putting echo_success with functions sourced displays the green [ OK ] but I do not see any other scripts in the /etc/rc.d/init.d/ executing echo_success or echo_failure. What have I got wrong? Also, How do i specify PHP_FCGI_CHILDREN with daemon? echo [ $RETVAL -eq 0 ] && touch /var/lock/subsys/

  Read the article

• Problems installing icinga-web

  - by Kungurov

  I'm using Ubuntu 10.04 LTS (64bit, Server), Apache 2.2.14 Following the instruction from the oficial icinga page http://docs.icinga.org/latest/en/index.html I installed the icinga-web-1.7.1 on my machine and configured a few hosts for test purposes. The Classic Interface runs as expected but the new Web Interface does not show any data. When I try: ps aux | grep ido2db | grep -v grep I get: icinga 27425 0.0 0.0 41464 600 ? Ss Jul27 0:00 /usr/local/icinga/bin/ido2db -c /usr/local/icinga/etc/ido2db.cfg which might indicate a problem with idomod/ido2db because according to the docs there should be at least 2 processes greped. Any ideas how to fix that?

  Read the article

• rsnapshot intervals in configuration file...

  - by Patrick

  A simple question about rsnapshot. In order to perform daily backups I'm going to add lines to cron in my Ubuntu. Then, why do I have also these lines in the rsnapshot.conf ? ######################################### # BACKUP INTERVALS # # Must be unique and in ascending order # # i.e. hourly, daily, weekly, etc. # ######################################### interval hourly 6 interval daily 7 interval weekly 4 #interval monthly 3 If I use cron, should I disable them ? thanks ps. I've just realized that in the crontab I still have "hourly" and "daily". Should I then uncomment only the one I use in the crontab ? And what's the point to specify hourly if it is already specified in cron ? I'm a bit confused. # crontab -e 0 */4 * * * /usr/local/bin/rsnapshot hourly 30 23 * * * /usr/local/bin/rsnapshot daily

  Read the article

• SSH: Port Forwarding, Firewalls, & Plesk

  - by Kian Mayne

  I edited my SSH configuration to accept connections on Port 213, as it was one of the few ports that my work firewall allows through. I then restarted sshd and everything was going well. I tested the ssh server locally, and checked the sshd service was listening on port 213; however, I still cannot get it to work outside of localhost. PuTTY gives a connection refused message, and some of the sites that allow check of ports I tried said the port was closed. To me, this is either firewall or port forwarding. But I've already added inbound and outbound exceptions for it. Is this a problem with my server host, or is there something I've missed? My full SSH config file, as requested: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 Port 213 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

• Scanning php uploads in tmp directory with clamdscan fails

  - by Nikola

  I can't seem to get this thing to work, some permission problem maybe, but i can't even run clamdscan normally form console with root the result is always Permission denied. for example i create a file test.txt (eicar file) in /tmp and execute "clandscan /tmp/test.txt" in console logged in as root and i get "/tmp/test.txt: Access denied. ERROR ". The clamd demon is running with user clamav could that be the reason? Now i want to scan the same file (/tmp/test.txt) via php , so i run (i have chowned the file to apache:apache ) $cmd="clamdscan /tmp/test.txt"; exec($cmd,$a,$b); i get error 127 i try with the full path of the command /usr/bin/clamdscan i get error 126 (command is found but is not executable), this means that apache doesn't have the permission to execute /usr/bin/clamdscan ? what could be the problem?

  Read the article

• Error running Solr

  - by Jon H

  I'm trying to install Apache Solr for Plone, via collective.solr. I've followed the instructions above, and extended my buildout with: [buildout] extends = buildout.cfg https://github.com/Jarn/collective.solr/raw/master/buildout/solr.cfg [instance] eggs += collective.solr bin/buildout runs fine, however, when I try bin/solr-instance fg I get the following error: Traceback (most recent call last): File "bin/solr-instance", line 114, in <module> start(False) File "bin/solr-instance", line 43, in start stdout=logfp, stderr=logfp).pid File "/usr/lib/python2.6/subprocess.py", line 633, in __init__ errread, errwrite) File "/usr/lib/python2.6/subprocess.py", line 1139, in _execute_child raise child_exception OSError: [Errno 2] No such file or directory Graceful stop What am I missing / doing wrong?

  Read the article

• Running PHPmyAdmin on Nginx, port 8080 passed to varnish not working well!

  - by amrnt

  I installed Nginx, Varnish and PHP-fpm. Then I installed PHPmyAdmin and made a virtual host for it: server{ listen 8080; server_name phpmyadmin.Domain.com; access_log /var/log/phpmyadmin.access_log; error_log /var/log/phpmyadmin.error_log; location / { root /usr/share/phpmyadmin; index index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/phpmyadmin$fastcgi_script_name; include /opt/nginx/conf/fastcgi_params; } } When I go to phpmyadmin.Domain.com it works as expected! but after submitting username/password it redirects me to phpmyadmin.Domain.com:8080/index.php?... with page cannot be found response as well! What could I do?

  Read the article

• Script errors when run by launchd at startup, but not when run in Terminal

  - by Mechcozmo

  I'm attempting to create a RAM disk that loads the previous contents when the system starts up, and every six hours writes the contents to a disk image. Currently, when you run the script from the terminal ("sudo bash LogToRAM.sh") everything works fine. But when run from launchd during startup, it doesn't work. Here's the lines from the log; the first line just gives some idea as to where in the boot process we are: SecurityAgent[202] Showing Login Window com.mechcozmo.LogToRAM[51] + /Developer/usr/bin/SetFile -a V /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] ERROR: File Not Found. (-43) on file: /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] + /usr/sbin/asr -source '/Library/Application Support/LogToRAM/RAMdisk_store.dmg' -target /Volumes/LogfileRAMdisk/ -noverify Here is the script and plist file in question. Note that 'set -vx' is up at the top of the script; it give a lot of information about what is happening in the script. My current theory is that the /Volumes directory does not exist at this stage of the boot process, but that seems unlikely to be honest.

  Read the article

• Nginx Reverse Proxy Node.js and Wordpress + Static Files Issue

  - by joemccann

  I have had quite a time trying to get nginx to serve static assets from my wordpress blog. Have a look at the config and let me know if you can help. ( https://gist.github.com/1130332 - to see the entire thing) server { listen 80; server_name subprint.com; access_log /var/www/subprint/logs/access.log; error_log /var/www/subprint/logs/error.log; root /var/www/subprint/server/public; # express serves static resources for subprint.com out of here location / { proxy_pass http://127.0.0.1:8124; root /var/www/subprint/server; access_log on; } #serve static assets location ~* ^(?!\/).+\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|pdf|txt|tar|wav|bmp|rtf|js|flv|swf|html|htm)$ { expires max; access_log off; } # the route for the wordpress blog # unfortunately the static assets (css, img, etc.) are not being pathed/served properly location /blog { root /var/www/localhost/public; index index.php; access_log /var/www/localhost/logs/access.log; error_log /var/www/localhost/logs/error.log; if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?q=$1 last; break; } if (!-f $request_filename) { rewrite /blog$ /blog/index.php last; break; } } # actually serves the wordpress and subsequently phpmyadmin location ~* (?!\/blog).+\.php$ { fastcgi_pass localhost:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/localhost/public$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /usr/local/nginx/conf/fastcgi_params; } # This works fine, but ONLY with a symlink inside the /var/www/localhost/public directory pointing to /usr/share/phpmyadmin location /phpmyadmin { index index.php; access_log /var/www/phpmyadmin/logs/access.log; error_log /var/www/phpmyadmin/logs/error.log; alias /usr/share/phpmyadmin/; if (!-f $request_filename) { rewrite /phpmyadmin$ /phpmyadmin/index.php permanent; break; } } # opt-in to the future add_header "X-UA-Compatible" "IE=Edge,chrome=1"; }

  Read the article

• Monit send alert to nagios NSCA

  - by mYzk

  I want to monitor a web with monit check host function and if the site is down then alert it to nagios nsca so it sends the info to nagios and nagios marks it as status OK or host down for example. The problem is that how can I make the monit alert fuction send the info to nagios nsca. I am not sure that this will work, but what I came up with is: set alert exec 'echo -e "nagios nsca format" | /usr/local/nagios/bin/send_nsca -H serveraddress -c /usr/local/nagios/etc/send_nsca.cfg' Would this work and is it the best solution to work with or can it be done some other way?

  Read the article

• Configure httpd.conf alias/subdirectory point to another server

  - by azrim

  Hi, I,m having a web server for testing purposes to host my domain http://www.domain.com which run perfectly. Below is server specs: OS Freebsd 7.2 MySQL 5.1.33 Apache 2.2.11 PHP 5.2.9 I can do alias directory in my httpd.conf so that my domain can have subdirectory hosting in the same server such as httpd://domain.com/subdomain1, httpd://domain.com/subdomain2 and so on. All my subdomain1 and subdomain2 directory folders reside on the same web server but only different location. Below is my example from httpd.conf for the alias subdomain1 block: Alias /subdomain1 "/usr/local/www/subdomain1" <Directory "/usr/local/www/subdomain1"> Options +Indexes AllowOverride None allow from all </Directory> I,m looking a way in order my subdomain1 and subdomain2 directory is read from another server in my LAN but remain hosted as httpd://domain.com/subdomain1. Really appreciate anyone know how to do this. Thanks,

  Read the article

• All terminal commands (like ls, cd, edit, open) are returning errors on my Mac

  - by park

  From what I can tell from reading other questions/answers is that my .bash_profile file may be corrupt. If I type echo $PATH in terminal the result is: /usr/local/git/bin From what I've read, that's not what the result is supposed to be. But I also can't get any of the commands (like edit or subl, for Sublime Text 2) to open the .bash_profile file to edit it. I was able to open the file in TextEdit using "cmd-shift-.", and here's what's in the file: [[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" PATH=$PATH:~/bin export PATH export PATH=/usr/local/git/bin But the file is LOCKED, so I can't edit it there either. I'm very new to programming and in the middle of trying to install everything on my Mac to go through a Ruby on Rails tutorial. I can't even check my version of ruby, since even ruby -v returns -bash: ruby: command not found Any help would be greatly appreciated. Thanks.

  Read the article

• PATH variable recently changed

  - by Dan

  $ loopy Command 'loopy' is available in '/usr/games/loopy' The command could not be located because '/usr/games' is not included in the PATH environment variable. loopy: command not found Every answer I've found just says to add it to my .profile... but this should be be in the PATH for all users, and was up until recently (I have no idea what would have caused it to change). How can I solve this on my system for all users? What could have caused this to change? Thanks.

  Read the article

• can't send with postfix but I can whith one user

  - by CvR_XX

  I have a postfix and dovecot server but when i try to send an email i get an time -out. Im trying to send with the email [email protected]. A telnet session isn't helping much ether. I get a blank screen. Local it's working fine. My smtp service is running on treadity.com:25. The strange thing is that the logs are completely empty with any info regarding sending emails. Receiving is working alright. Another strange thing is that i've send some message's and that it worked. But that is only with one email. I can still send from that account but other emails are failing any idea's? config file: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key #smtpd_use_tls=yes #smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache #smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_cert_file=/etc/ssl/certs/dovecot.pem smtpd_tls_key_file=/etc/ssl/private/dovecot.pem smtpd_use_tls=yes # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key #smtpd_use_tls=yes #smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache #smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_cert_file=/etc/ssl/certs/dovecot.pem smtpd_tls_key_file=/etc/ssl/private/dovecot.pem smtpd_use_tls=yes # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key #smtpd_use_tls=yes #smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache #smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_cert_file=/etc/ssl/certs/dovecot.pem smtpd_tls_key_file=/etc/ssl/private/dovecot.pem smtpd_use_tls=yes smtpd_tls_auth_only = yes #Enabling SMTP for authenticated users, and handing off authentication to Dovecot smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_auth_enable = yes 1,1 Top

  Read the article

• Linux Software Raid runs checkarray on the First Sunday of the Month? Why?

  - by mgjk

  It looks like Debian has a default to run checkarray on the first Sunday of the month. This causes massive performance problems and heavy disk usage for 12 hours on my 2TB mirror. Doing this "just in case" is bizzare to me. Discovering data out of sync between the two disks without quorum would be a failure anyway. This massive checking could only tell me that I have an unrecoverable drive failure and corrupt data. Which is nice, but not all that helpful. Is it necessary? Given I have no disk errors and no reason to believe my disks have failed, why is this check necessary? Should I take it out of my cron? /etc/cron.d# tail -1 /etc/cron.d/mdadm 57 0 * * 0 root [ -x /usr/share/mdadm/checkarray ] && [ $(date +\%d) -le 7 ] && /usr/share/mdadm/checkarray --cron --all --quiet Thanks for any insight,

  Read the article

• Rsync : execute permission required

  - by user651488

  I'm using rsync between two servers to transfer files. The problem is some files are not transferred. I get this error : rsync: readlink "/var/www/index.html" failed: Permission denied (13) So I check permissions on the server and after make tests, I notice a file is transferred only if it has these permissions : R-W ! If the file have these permissions : R--, Rsync can't download it !? Command: /usr/bin/rsync -avzr -e "/usr/bin/ssh -i /home/replication/thishost-rsync-key" [email protected]:/var/www/index.html ./ Is it a bug with Rsync ? I find any information about this problem. Thanks for your help Debian Etch 2.6.30 Rsync 2.6.9 protocol version 29

  Read the article

• how to set global PATH on OS X?

  - by lajos

  I'd like to append to the global PATH variable on OS X so that all user shells and GUI applications get the same PATH environment. I know I can append to the path in shell startup scripts, but those settings are not inherited by GUI applications. The only way I found so far is to redefine the PATH environment variable in /etc/launchd.conf: setenv PATH /usr/bin:/bin:/usr/sbin:/sbin:/my/path I coulnd't figure out a way to actually append to PATH in launchd.conf. I'm a bit worried about this method, but so far this is the only thing that works. Does anyone know of a better way?

  Read the article

• ubuntu grep command

  - by user34104

  i wanna find all cicle for into ubuntu i write: grep for(* /usr/include don't work...why?

  Read the article

• What is the best way to make Calculate SHA1 as a context menu option in Mac OS X?

  - by Andrei

  In order to calculate the SHA1 checksum of a downloaded file, I could type /usr/bin/openssl sha1 in Terminal and then drag there the file which I want check. To make it simpler, one could enable a Context Menu item for this action. What is the best way to create such item in Mac OS X 10.6? A detailed answer is appreciated, because I don't have good experience with AppleScript, etc. Step by step Open Automator Create new service Choose to receive selected Files and Folders in Finder Add action Run Shell Script where your bash command is /usr/bin/openssl sha1 "$@" and you pass input as arguments How can I get the output? Preferably in a Growl pop-up or a message window/dialog.

  Read the article

• What process is resurrecting mysqld?

  - by ripper234

  I'm following this guide to reset my mysql root password (I'm on ubuntu). When I kill the mysqld process, it immediately gets resurrected. The parent process ID is 1. How can I find what keeps resurrecting mysqld? $ ps -ef | grep mysql mysql 30136 1 0 07:16 ? 00:00:00 /usr/sbin/mysqld root 30295 30274 0 07:18 pts/0 00:00:00 grep --color=auto mysql $ kill -9 30136 $ ps -ef | grep mysql mysql 30302 1 2 07:18 ? 00:00:00 /usr/sbin/mysqld root 30404 30274 0 07:18 pts/0 00:00:00 grep --color=auto mysql $

  Read the article

• How can I restrict the backuppc client user as much as possible? (rsync)

  - by jxn

  I have backuppc making full backups of servers, but I'd like to be sure that my set up is as paranoid as possible. BackupPC is set up to backup via rsync, and it is set up to use a specific user on each client to be backed up. Because the backuppc client user has to have access to every file on the client machine and the ability to ssh into the machine without an interactive password, I'm a little nervous about securing the clients, and I'd like to know I haven't overlooked any options. Here's what I have in place: in the client user's authorized_keys file, i've included from="IPTOSERVER",command="/usr/bin/rsync" before the user's public key, so that the user can only login coming from the BackupPC server. Next, in the sudoers file, I've added this line: backuppc ALL=NOPASSWD: /usr/bin/rsync to allow root-level permissions only for the rsync command for that user. Are there other user, policy, or ssh restrictions that I can add while still allowing the backup pc client user to rsync all files?

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >