Search Results

Search found 9758 results on 391 pages for 'wireless networking'.

Page 110/391 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• Error installing Network driver

  - by Simon Carpentier

  I'm tring to install NetLimiter 3 (3.0.0.10, x64) on my Windows 7 x64 machine. At the driver installation step, I'm getting an error: Error 0x8004a029: Couldn't install the network component. (InstallNdisIMDriver) UPDATE 2010-09-20: I received a response to my support request: Hi Simon, It seems that problem is rather on your system than in NL3. Too many networking applications (VPN, Virtual computers) are installed on your machine and they are preventing NL3 from proper installation. In order to install NetLimiter 3, try to disable/temporarily remove these apps. Several users had the same problem and shuffling with adapter and networking software helped them. Please, let us know which action helps you (if any). Sincerely, Jan Bilek Any thoughts on this?

  Read the article

• Can SATA be used to connect computers?

  - by André

  Can SATA be used to connect two computers together, just like a crossover Ethernet cable would do ? I know SATA has no "networking" features and even though a controller may have multiple ports, the drives don't "see" each other, and that in SATA one device acts as the host (the computer) and the other device is some kind of "client" (the storage drive). But still, did anyone attempt to make a kernel module that would make one computer appear as a "client" (so that the host's SATA controller detects it as a standard hard drive) and then set up like a pseudo-Ethernet link or a very high speed serial link (and then run pppd on it and do networking) ? Note : I know this is an unprofessional and totally stupid idea, I'm just asking out of curiosity.

  Read the article

• Can a faulty DNS record prevent networking?

  - by Bob

  My server's network interfaces are not available anymore since yesterday evening. I didn't change anything, but I added a new DNS-record shortly before. Unfortunately, the web interface I used to add this DNS record escaped some characters, so I've got a faulty DNS record: example.com 86400 IN TXT "\"v=spf1 mx a -all\"" However, this is the only unusual thing I could notice about this. Is it possible that the \-characters in my DNS record are confusing for some routers? Or could it be the system itself which is confused by this (it's a Debian Lenny system). Unfortunately, I can't quick-test it because of the long TTL of the record.

  Read the article

• Xen private networking between multiple hosts

  - by Joe

  I have two physical hosts running Xen 3.2, sharing storage via iSCSI. On these two hosts are a number of domUs and I'd like to network them in multiple private networks so they can only contact other domUs on their private network. My understanding of the xen documentation suggests it's possible to do this within one dom0 (ie create virtual networks between domUs), but I've found nothing explaining how this can be implemented across multiple dom0s on different hosts. The only thing that jumps to mind is manually creating iptable rules to route data to the other host, but this seems to lack elegance and could quickly grow cumbersome. Any suggestions? All advice is much appreciated!

  Read the article

• Microsoft VirtualPC Networking Issue

  - by Joda Maki

  I am using Microsoft VPC running the supplied microsoft images to test IE6/7. The ip addresses that get assigned to these images are via dhcp and get valid ip addresses in my subnet. They can access the external internet just fine. However, they cannot ping my host machine, nor can my host machine ping them (using internal ip addresses). Thus, they can't access my webserver to test with. How is this possible and how do I fix it?

  Read the article

• computer networking

  - by kevin

  sir, i'm getting to know about the ARP poisoning as it just works in LANs which means i can only steal cookies from a specific areas, but sir what if i wanna get the cookies of the person who is in other country?? how can i steal the cookies of the person who is in other country is there any way plz reply me i'm very confused & curious to know it. sir plz do reply me on my email address,[email protected]

  Read the article

• Networking 2 Virtual PC with one VPC as DHCP server

  - by vivek

  My host OS is Win XP Professional. The host has a real network connection via DSL and I created a second network connection using Microsoft Loopback Adapter. Internet connection sharing is enabled. The Microsoft Loopback adapter has a IP address of 192.168.0.1. I have 1 Virtual PC which has Windows Server 2003. I have setup the network connection on this VPC to use Microsoft Loopback Adapter. I setup this VPC to be the Domain Controller , DNS Server and DHCP Server. I set this to a static IP address 192.168.0.2 (on the same subnet as the MS Loopback adapter) I have a second Virtual PC which also has Windows Server 2003. The network connection on this VPC is set to "Local Only". I want this VPC to get its IP address from the 1st VPC on which I setup as a DHCP server. What i want is the 2 VPC should be in a network with one of the VPC acting as the domain controller, DNS Server and DHCP server. The second VPC shoud get its IP address from the 1st VPC. It should be a part of the domain of the 1st VPC. When i tried to make the second VPC get the IP address from the first VPC I am not succeeding. Can somebody post some suggestions on how to go about this ?

  Read the article

• networking fails when DNS servers are specified manualy

  - by Matthew Scouten

  When I let Windows-7 use DHCP to find its own DNS server, everything works fine. Then I use ipconfig to get the IPs of the DNS servers in question, and specify them manually. Now the network stops working. (I need to do this because my next step is to restore the router that is going to lie about the proper DNS server. Don't ask why, it is required by my father's work. The IT there are not exactly on the ball.) Why would this make a difference? It is the same set of servers, just obtained differently.

  Read the article

• [SOLVED] vmware problems - networking - no packet response

  - by jack

  XP is my host. Ubuntu is my Guest in VMware. When I do the following commands, I should get SMTP respones but now get no response. I use wireshark to analayze it. Also in wireshark shows nothing. root@vmware:~# netcat 192.168.1.2 25 220 762462a8c4d Microsoft ESMTP MAIL Service, Version: 6.0.2600.5949 ready at Fri, 12 May 2010 18:04:20 +0800 EHLO SAYHELLO VRFY TEST@LOCALHOST test \ sdfsafsd How can I fix it? UPDATE: I came to know that this is no VMWare problem. This is Netcat problem. For this, you might have to type Ctrl+M {ENTER} {ENTER}

  Read the article

• New Linux Mint User Networking questions

  - by nyCecilia

  I have a readynas that I've been using with XP, Vista, and Win7. Because of weirdness with Vista, it is set up for full read/write guest access. Now I have a Linux Mint netbook. I have set up smb on it and can read from the readynas smb shares, but I can't write. What else can I check? Part2--(keep in mind my network knowledge is small...or smaller) what is the difference between NFS and SMB, can a readynas be set up to allow access to the SMB shares via NFS (if I can figure out NFS lol)? A link to a guide for beginners would be appreciated, google searching "Linux Mint Readynas" doesn't give me anything useful.

  Read the article

• Shared block device file system (cluster file system without networking)

  - by fungs

  Is there any file system that can be mounted multiple times and supports concurrent file access for Linux? Basically I want something like a cluster file system but without the need to have a running network for a distributed lock manager. That can be very handy in connection with virtual machines that can share data with the host or another VM without the need to create a network link. This I want to avoid to keep the network architecture secure (virtual machine in DMZ) but share large files. No need to scale it up, just two machines that mount the same block device. Shouldn't it be possible to have file locking information right on the disk?

  Read the article

• networking problem

  - by ritesh

  dear sir, please help me i have reliance bandwidth connection & i want to set local area network without use a router please help how set this with regards ritesh rana [email protected]

  Read the article

• What's required to enable communication between two IP ranges located behind one switch?

  - by Eric3

  Within our co-located networking closet, we have control over two ranges of 254 addresses, e.g. 64.123.45.0/24 and 65.234.56.0/24. The problem is, if a host has only one IP address, or a block of addresses in only one range, it can't contact any of the addresses in the other subnet. All of our hosts use our hosting provider's respective gateway, e.g. 64.123.45.1 or 65.234.56.1 A host on the 64.123.45.0/24 range can contact the 65.234.56.1 gateway and vice-versa Everything in our closet is connected to an HP ProCurve 2810 (a Layer 2-only switch), which connects through a Juniper NetScreen-25 firewall to the outside world What can I do to enable communication between the two ranges? Is there some settings I can change, or do I need better networking equipment?

  Read the article

• Routing Essentials

  - by zharvey

  I'm a programmer trying to fill a big hole in my understanding of networking basics. I've been reading a good book (Networking Bible by Sosinki) but I have been finding that there is a lot of "assumed" information contained, where terms/concepts are thrown at the reader without a proper introduction to them. I understand that a "route" is a path through a network. But I am struggling with visualizing some routing-based concepts. Namely: How do routes actually manifest themselves in the hardware? Are they just a list of IP addresses that get computed at the network layer, and then executed by the transport? What kind of data exists in a so-caleld routing table? Is a routing-table just the mechanism for holding these lists of IP address (read above)? What are the performance pros/cons for having a static route, as opposed to a dynamic route?

  Read the article

• Virtual Machine Network Services causes networking problems in Vista Enterprise 64 bit install

  - by Bill

  I have a Quad-core/8GB Vista Enterprise 64-bit (SP2) installation on which I installed Virtual PC 2007. I have a problem that is opposite of all that I found searching around the Internet--everybody has problems making network connections from their guest VM. When Virtual Machine Network Services is enabled in the protocol stack for my network card across a reboot, it causes access problems to the network. The amount of time to login in using a domain credentialed account is upwards of 3 minutes, then after reaching the desktop the network and sharing center shows that my connection to the domain is unauthenticated. Disabling and re-enabling the Virtual Machine Network Services (uncheck in network properties/apply/recheck/apply) fixes the problem. And as long as I have the VMNS disabled when I shutdown the restart runs smoothly. I just have to remember to enable after login and disable before shutdown. I have un-installed and re-installed Virtual PC 2007 multiple times with restarts between. The install consists of the SP1 + a KB patch for guest resolution fix. Any help would be greatly appreciated. Some additional information... At one point during my hairpulling and teethgnashing with this, I tried to ping my primary DC and observed some weird responses: (Our DC is 10.10.10.25, my dynamic IP was 10.10.10.203) Reply from 10.10.10.203, Destination host unreachable. Request timed out. Reply from 10.10.10.25: ... This is not consistently repeatable, but thought it might strike a chord with someone.

  Read the article

• University Assignment: Datacenter/Networking Infrastructure for Hosting Company [closed]

  - by TCB13

  My university assigned me to theorizing a data center for an Web Hosting company. The company should provide the following services: Shared WebHosting; Dedicated Servers; VPS (Virtual Private Server); The bandwith (as resquested) is limited to 10 Gbps. Is there any good book / other info I can read (max 100 pages) about how to design a good data center for hosting, what are the best practices and what should be done from a (logical) network perspective, what security policies should be implemented and how the data center should be built (physically)? Thank you ;)

  Read the article

• vmware problems - networking - no packet response

  - by jack

  XP is my host. Ubuntu is my Guest in VMware. When I do the following commands, I should get SMTP respones but now get no response. I use wireshark to analayze it. Also in wireshark shows nothing. root@vmware:~# netcat 192.168.1.2 25 220 762462a8c4d Microsoft ESMTP MAIL Service, Version: 6.0.2600.5949 ready at Fri, 12 May 2010 18:04:20 +0800 EHLO SAYHELLO VRFY TEST@LOCALHOST test \ sdfsafsd How can I fix it?

  Read the article

• vmware workstation - virtual network adapters missing from ipconfig, still show in networking (XP host)

  - by Adam

  Hi Folks - here's a new one for me, and my first time posting here: I installed VMWare workstation 7.1 on a new PC. VMWare properly installs the virtual network adapters under the Network Connections control panel, however for some reason they do not show up under ipconfig, which is very weird. They also don't appear anywhere in "route print". I don't have network connectivity to the VM. My guesses are perhaps some conflict with Symantec AntiVirus or Symantec Client Firewall. Tried the following things: enabling TCP/IP in the virtual network adapters (they often get installed with it disabled for some reason) Restoring defualts in the VMnetcfg gui tool (this causes an uninstall and reinstall of the virtual network adapters on the host) Re-installing vmware workstation Uninstalling checkpoint secureremote and then reinstalling vmware Just to be clear, this problem is totally on the host. In my searching for stuff about (non-vmware) adapters missing from ipconfig, I see some posts about resetting the TCP/IP stack using netsh. Looking into that next... Thanks!

  Read the article

• Is there a way to automate testing for a GNS3 network topology?

  - by Chedy2149

  I'm working on an MPLS backbone topology using GNS3, this topology includes configuration of several networking technologies such as IPv6, BGP, OSPF, IPv6 to IPv4 dynamic tunneling, MPLS based VPNs, MPLS based traffic engineering... So I'm a beginner with basic knowledge in networking (Ipv4 addressing, basic routing and switching) and I can't just easly test if my topology works or not, moreover fiddling with configuration I've noticed that sometimes when getting MPLS config right and missing BGP config all my topology is messed up. Given that I use Cisco 7200 series routers, is there any way to build a test harness for my topology in order to guarentee correctness with a single push button automated process?

  Read the article

• Networking is broken in my VMware 10.0 VMs after upgrading to Windows 8.1

  - by Michael Geary

  I have a VMware Workstation 10.0 installation with several virtual networks including the default host-only and NAT networks. After upgrading to Windows 8.1, the NAT network was not working. I booted an Ubuntu VM with the default network setup that was previously working, and it sat for a long time during startup saying it was waiting for the network. After it finally started up, an ifconfig showed no IP address for eth0. How can I fix the broken network?

  Read the article

• Problems bringing up a second virtual network interface

  - by tubaguy50035

  I'm having issues adding a second IP address to one interface. Below is my /etc/networking/interfaces # The loopback network interface auto lo iface lo inet loopback #eth0 is our main IP address auto eth0 iface eth0 inet static address 198.58.103.* netmask 255.255.255.0 gateway 198.58.103.1 #eth0:0 is our private address auto eth0:0 iface eth0:0 inet static address 192.168.129.134 netmask 255.255.128.0 #eth0:1 is for www.site.com auto eth0:1 iface eth0:1 inet static address 198.58.104.* netmask 255.255.255.0 gateway 198.58.104.1 When I run /etc/init.d/networking restart, I get a fail error about bringing up eth0:1: RTNETLINK answers: File exists Failed to bring up eth0:1. Any reason this would be? I didn't have any problems with I first set up eth0 and eth0:0.

  Read the article

• LXC Container Networking

  - by digitaladdictions

  I just started to experiment with LXC containers. I was able to create a container and start it up but I cannot get dhcp to assign the container an IP address. If I assign a static address the container can ping the host IP but not outside the host IP. The host is CentOS 6.5 and the guest is Ubuntu 14.04LTS. I used the template downloaded by lxc-create -t download -n cn-01 command. If I am trying to get an IP address on the same subnet as the host I don't believe I should need the IP tables rule for masquerading but I added it anyways. Same with IP forwarding. I compiled LXC by hand from the following source https://linuxcontainers.org/downloads/lxc-1.0.4.tar.gz Host Operating System Version #> cat /etc/redhat-release CentOS release 6.5 (Final) #> uname -a Linux localhost.localdomain 2.6.32-431.20.3.el6.x86_64 #1 SMP Thu Jun 19 21:14:45 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Container Config #> cat /usr/local/var/lib/lxc/cn-01/config # Template used to create this container: /usr/local/share/lxc/templates/lxc-download # Parameters passed to the template: # For additional config options, please look at lxc.container.conf(5) # Distribution configuration lxc.include = /usr/local/share/lxc/config/ubuntu.common.conf lxc.arch = x86_64 # Container specific configuration lxc.rootfs = /usr/local/var/lib/lxc/cn-01/rootfs lxc.utsname = cn-01 # Network configuration lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 LXC default.confu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:f #> cat /usr/local/etc/lxc/default.conf lxc.network.type = veth lxc.network.link = br0 lxc.network.flags = up #> lxc-checkconfig Kernel configuration not found at /proc/config.gz; searching... Kernel configuration found at /boot/config-2.6.32-431.20.3.el6.x86_64 --- Namespaces --- Namespaces: enabled Utsname namespace: enabled Ipc namespace: enabled Pid namespace: enabled User namespace: enabled Network namespace: enabled Multiple /dev/pts instances: enabled --- Control groups --- Cgroup: enabled Cgroup namespace: enabled Cgroup device: enabled Cgroup sched: enabled Cgroup cpu account: enabled Cgroup memory controller: /usr/local/bin/lxc-checkconfig: line 103: [: too many arguments enabled Cgroup cpuset: enabled --- Misc --- Veth pair device: enabled Macvlan: enabled Vlan: enabled File capabilities: /usr/local/bin/lxc-checkconfig: line 118: [: -gt: unary operator expected Note : Before booting a new kernel, you can check its configuration usage : CONFIG=/path/to/config /usr/local/bin/lxc-checkconfig Network Config (HOST) #> cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=dhcp ONBOOT=yes #> cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 ONBOOT=yes TYPE=Ethernet IPV6INIT=no USERCTL=no BRIDGE=br0 #> cat /etc/networks default 0.0.0.0 loopback 127.0.0.0 link-local 169.254.0.0 #> ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:fe12:30f2/64 scope link valid_lft forever preferred_lft forever 3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 42:7e:43:b3:61:c5 brd ff:ff:ff:ff:ff:ff 4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:ff:ff inet 10.60.70.121/24 brd 10.60.70.255 scope global br0 inet6 fe80::20c:29ff:fe12:30f2/64 scope link valid_lft forever preferred_lft forever 12: vethT6BGL2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether fe:a1:69:af:50:17 brd ff:ff:ff:ff:ff:ff inet6 fe80::fca1:69ff:feaf:5017/64 scope link valid_lft forever preferred_lft forever #> brctl show bridge name bridge id STP enabled interfaces br0 8000.000c291230f2 no eth0 vethT6BGL2 pan0 8000.000000000000 no #> cat /proc/sys/net/ipv4/ip_forward 1 # Generated by iptables-save v1.4.7 on Fri Jul 11 15:11:36 2014 *nat :PREROUTING ACCEPT [34:6287] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT # Completed on Fri Jul 11 15:11:36 2014 Network Config (Container) #> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp #> ip a s 11: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 02:69:fb:42:ee:d7 brd ff:ff:ff:ff:ff:ff inet6 fe80::69:fbff:fe42:eed7/64 scope link valid_lft forever preferred_lft forever 13: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever

  Read the article

• Citrix Xen VM's lose networking

  - by Ash

  My client has a XenServer 6.0.2 installation with 2 Window Server 2008 R2 virtual machines. Whenever the virtual machines are rebooted they lose their IP settings (IP address, subnet, gateway). Each time after a reboot I need to login to each VM via XenCenter and re-apply the required static IP settings. This causes issues with connected iSCSI drives within each VM - drives need to be reconnected after each reboot. For example, a network adapter has the following settings pre-reboot: Description . . . . . . . . . . . : Citrix PV Ethernet Adapter #0 Physical Address. . . . . . . . . : C6-FB-A2-4F-2C-F3 IPv4 Address. . . . . . . . . . . : 10.101.0.101(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.101.0.10 DNS Servers . . . . . . . . . . . : 10.101.0.100 NetBIOS over Tcpip. . . . . . . . : Enabled Post-reboot: Description . . . . . . . . . . . : Citrix PV Ethernet Adapter #0 Physical Address. . . . . . . . . : C6-FB-A2-4F-2C-F3 Autoconfiguration IPv4 Address. . : 169.254.153.174(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 10.101.0.100 NetBIOS over Tcpip. . . . . . . . : Enabled Under XenCenter -- Virtual Network Interfaces, each adapter is set to a static MAC address (i.e. "Use this MAC address"). I have tried the following commands within one VM but this had no effect: netsh winsock reset catalog netsh int ip reset Can someone please help?

  Read the article

• (Windows 7) Dial Up Connection Locks up the Networking Service

  - by Nick

  I connect to the internet by using my cell phone as a dial up modem. (shh, don't tell my service provider) The connection is usually seamless and the speed is good (150kbps) but occasionally, the connection will get terminated by either the phone or the network, I'm not sure which and then Windows7 stubbornly doesn't acknowledge that the connection is dead so I can re-dial. I have tried to manually kill the connection, but then anything related to the network service refuses to open and the connection is still there. No "Network and Sharing Center", "Network Devices" and often the tray menu will refuse to pop open. The only way I have found to clear the problem is a full restart which. Logging off doesn't work and I haven't been able to find the service that is frozen. If anyone knows how to fix this or prevent this from happening or even how to go about troubleshooting I would be very grateful. ps. This problem is non-existant when tethering in linux on the same machine. (Ubunutu 9 and JoliOS)

  Read the article

• Route a specific user's traffic via VPN but still allow local networking

  - by wbg

  So, I want to route certain traffic via a VPN connection and the rest via my normal Internet connection. I want to run several different programs and most of them don't support binding to a specific network interface (tun0 in my case). I've managed to send a specific user's traffic via the VPN following the answers given here: iptables - Target to route packet to specific interface? But unfortunately, when I run a server that connects to the Internet and has a web interface running on a local IP (127.0.0.1/192.168.0.*), all the Internet traffic correctly goes via tun0, but I'm unable to connect to the web interface from a local IP as a different user. When I log in as the VPN-ified user, I can access services running on local IPs, but other users/machines can't access any servers I start. Can anyone point me in the right direction?

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >