Search Results

Search found 14694 results on 588 pages for 'zend controller router'.

Page 110/588 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• No sound on Debian unstable Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller

  - by Dave Roger

  I have no sound on my Debian unstable. # cat /etc/issue Debian GNU/Linux squeeze/sid # lspci |grep -i audio 00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02) # lsmod | grep -i snd snd_hda_codec_realtek 235506 1 snd_hda_intel 19907 0 snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5380 1 snd_hda_codec snd_pcm_oss 32591 0 snd_mixer_oss 12606 1 snd_pcm_oss snd_pcm 60471 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 4400 0 snd_rawmidi 15515 1 snd_seq_midi snd_seq_midi_event 4628 1 snd_seq_midi snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event snd_timer 15582 2 snd_pcm,snd_seq snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq snd 46446 11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 4598 1 snd snd_page_alloc 6249 2 snd_hda_intel,snd_pcm # cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.21. # uname -r 2.6.32-5-amd64

  Read the article

• Ericsson W35 ssh administration

  - by jblaster

  I picked up a Ericsson W35 at a pawn shop the other day and when I login to the administration section at 192.168.1.1 I get an error message about connecting to the database. It apparently supports ssh administration and I get a password prompt when attempting to ssh [email protected] but no passwords I try work and theres no documentation for it. Has anyone had success with ssh on the Ericsson W35 and is this issue fixable? Thanks.

  Read the article

• Our wi-fi at work is ridiculously slow, will adding more range extenders improve it?

  - by john

  At work, we have two wireless networks (e.g., Work1 Work2); the Work2 is used downstairs and Work1 is used upstairs. However, both are notoriously slow. The connection is better when we are wired in, but unfortunately due to our building being very old and our company growing very fast, most employees are not seated near the walls where the ethernet cables are. I had Cox, our ISP, run a bandwidth utilization test and it doesn't seem like we are capping out on upstream/downstream, which leads me to believe that it's strictly an issue with the wireless networks (which were implemented before I got there). The wireless networks are both Apple Airport Extremes. Is there anything I can do to improve the situation for everyone? Speeds are extremely slow, and sometimes drops out.

  Read the article

• Need to setup an office network, suggest some hardware?

  - by Yegor

  We have 6 windows workstations, spread out over a fairly large area. Need to share a DSL connection (upgrading to 100/100 mbit fiber in a few months) with these machines over a 1gbit network. Also need Wifi to be available for laptop use. Plan to add 2 rackmount servers for internal use as well. Can someone suggest a decent (preferably low cost) setup that will let me achieve the stuff mentioned above.

  Read the article

• Need Some comparative data on Apache and IIS

  - by zod

  This is not a pure programming question but very programming related question I am not sure where should i ask. if you dont know answer please dont downvote . If you know the right place to ask please suggest or move this question We have a web application running on PHP 5 , Zend Framework , Apche . I need some comparitive data which states the above technologies and server is one of the best and thousands of domains are using this. Do you know any website i can get this type of data listing major websites developed in PHP. Major domains runs on apache Major website running on Zend A comparitive case study on Apache and IIS or PHP and .Net

  Read the article

• Monitor LSI 3ware raid controller on ESXi

  - by aseq

  This concerns a server that runs ESXi (v. 4.x or 5.x) installed on drives that are configured into a raid10 using an LSI 3ware 97050 raid controller. I would like to know if there is a way to monitor the LSI 3ware series of controllers, in particular the 9750, through ESXi. And to hopefully also run the monitoring daemon LSI provides. I know you can set up a cronjob to execute tw_cli through ssh on the ESXi server. However that's not really ideal. I am not using vcenter by the way. It would be nice to have more than just monitoring working, since the 3ware software has a very useful web client, besides tw_cli.

  Read the article

• eSATA hotswap using Jmicron JMB363 controller

  - by Stephen

  I have tried both IDE and AHCI modes in the BIOS. Also tried many different driver revisions. I can't seem to hot swap an external SATA drive. I can use the wizard to safely remove it, but reconnecting doesn't do anything unless I reboot. I use a thermaltake dock, and I would like to swap in my backup drive sometimes to do images (they take all day over USB). I can reboot, but I'd like to use hot swap. The controller is a Jmicron JMB363. I'm using the latest BIOS on my motherboard, as well.

  Read the article

• Fritz!Box IPv6-Address different than IPv6-Prefix

  - by kmindi

  In my Fritzbox it states the following: IPv6-Adresse: 2a02:8070:600::14b6:c7******, Gültigkeit: 100465/86065s IPv6-Präfix: 2a02:8070:62c:3200::/56, Gültigkeit: 100464/86064s I am not able to connect to IPv6 Addresses from computers configured by the fritzbox, because they get an address with prefix 2a02:8070:62c:3200::/56 but somehow the fritzbox does not route those addresses. Is this because the IPv6-Address is not in the prefix range? The address of the Fritzbox responds to pings, but my computers reached via various addresses from the prefix range do not (: PING 2a02:8070:62c:3200:28d****(2a02:8070:62c:3200:28d****) 32 data bytes From 2a02:8070:600:0:14b6*** icmp_seq=0 Destination unreachable: Administratively prohibited From 2a02:8070:600:0:14b6*** icmp_seq=1 Destination unreachable: Administratively prohibited From 2a02:8070:600:0:14b6*** icmp_seq=2 Destination unreachable: Administratively prohibited From 2a02:8070:600:0:14b6*** icmp_seq=3 Destination unreachable: Administratively prohibited blocked ping this is "view" from outside From inside the ping6 looks like this: traceroute -6 heise.de traceroute to heise.de (2a02:2e0:3fe:100::8), 30 hops max, 80 byte packets 1 fritz.box (2a02:8070:62c:3200:****) 0.787 ms 1.424 ms 1.702 ms 2 * * * ...... 30 * * *

  Read the article

• Web Content Filtering

  - by Byron Wilcox

  I have recently bought a Cisco ASA 5505 for my small business, I was initially led to believe this device could do some limited website filtering that we would need. (one list of unrestricted, and a second for email only) Since it has come to my attention that it may not be able to do this what equipment or software will I need to make this happen?

  Read the article

• Port forwarding 443 doesn't work

  - by Interstellar_Coder

  So i'm hosting my own svn server and also have wamp running on the same machine. I have forwarded port 443 which the svn server is listening on. I can't seem to login when i simply forward the port, if i make the server a DMZ host then i can log in via https://mydomain.com, but i can't seem to figure out why simply forwarding port 443 doesn't work. Any ideas ? I checked online and it shows that port as stealth.

  Read the article

• RAID1 Hard drives with Intel Controller

  - by Dave_H

  I have an older server with 2 35GB hard drives arranged as a RAID-1 drive. I have 3 open bays, I'd like to add 2 more hard drives to the open bays and have all 4 drives configured as a RAID-1 drive that Windows sees as 1 larger drive. Is this possible? If not, the new drives are 2x as big as the old drives, is it possible to replace 1 of the old drives and rebuild then replace the second drive and rebuild and somehow expand the array to use all of the available space? The server is using an Intel hardware raid controller, the software interface is Intel Storage Console v2.12.

  Read the article

• Cannot create a new domain in an existing active directory forest

  - by Mackenzie Carr

  I have a domain controller setup on Windows Server 2008 R2 (Forest) and I have another Windows Server 2008 R2 (New Domain) and I want to create a new domain in an existing forest. I get the following error: An Active Directory domain controller for the domain mackdev.mackenziecarr.com could not be contacted The error was "no records found for the given DNS query" The query was for the SRV record for: _ldap._tcp.dc._msdcs.mackdev.mackenziecarr.com I've seem to have tried everything even tried adding this record to the DNS server of the primary forest. I even successfully joined this server to the domain without any issues but trying to create a new domain under the existing forest is no luck. The primary forest I.P. address is 192.168.2.20 the server that I am using to try to make a child domain is 192.168.2.21 My ipconfig are as follows: I.P. Address: 192.168.2.21 Subnetmask: 255.255.255.0 Gateway: 192.168.2.1 Primary DNS: 192.168.2.20

  Read the article

• Using the option port on my Watchguard Firebox as a 2nd gateway exit point?

  - by Donovan

  I'm working on a network project in witch I have to design our network to provide two different exit points. The points are differentiated by the path through the corporate network. One of them travels through some monitoring hardware the other does not. We have a Watchguard Firebox in use as our gateway. Currently the network side provides the unmonitored exit point. I was wondering if i hooked the option port to our lan at a point that would force traffic through the monitored path, would it cause any problems? Access to the unmonitored gateway port would be restricted by ip. That would force all others not authorized to point to the monitored gateway port. I thought with the above design i might be able to get away with not having to buy another firebox to achieve the design I want. Thanks, D

  Read the article

• Tips on setting up a virtual lab for self-learning networking topics

  - by Harry

  I'm trying to self-learn the following topics on Linux (preferably Fedora): Network programming (using sockets API), especially across proxies and firewalls Proxies (of various kinds like transparent, http, socks...), Firewalls (iptables) and 'basic' Linux security SNAT, DNAT Network admininstration power tools: nc, socat (with all its options), ssh, openssl, etc etc. Now, I know that, ideally, it would be best if I had 'enough' number of physical nodes and physical network equipment (routers, switches, etc) for this self-learning exercise. But, obviously, don't have the budget or the physical space, nor want to be wasteful -- especially, when things could perhaps be simulated/emulated in a Linux environment. I have got one personal workstation, which is a single-homed Fedora desktop with 4GB memory, 200+ GB disk, and a 4-core CPU. I may be able to get 3 to 4 additional low-end Fedora workstations. But all of these -- including mine -- will always remain strictly behind our corporate firewall :-( Now, I know I could use VirtualBox-based virtual nodes, but don't know if there are any better alternatives disk- and memory- footprint-wise. Would you be able to give me some tips or suggestions on how to get started setting up this little budget- and space-constrained 'virtual lab' of mine? For example, how would I create virtual routers? Has someone attempted this sort of thing before: namely, creating a virtual network lab behind a corporate firewall for learning/development/testing purposes? I hope my question is not vague or too open-ended. Basically, right now, I don't know how to best leverage the Linux environment and the various 'goodies' it comes with, and buying physical devices only when it is absolutely necessary.

  Read the article

• How can I effectively block torrenting?

  - by Chauncellor

  My WNR1000v3 is serving six people and two of them have decided that despite my warnings they're going to torrent heavily all day. Not dealing with that crap I decided to reserve their IPs and set up port blocking 1000-65535 at all times of the day. However.... looking at the log reveals that stuff is still going through. Half of the entries are saying: [LAN access from remote] from <externalIP>:16001 to 192.168.1.7:18946 Friday, Oct 12,2012 22:47:05 and half are saying: [Service blocked: BlockTorrents] from source 192.168.1.7, Friday, Oct 12,2012 22:46:26 Is this because of uPNP? Or does the 'block services' feature Netgear has only work with outgoing connections? Is there something that I'm missing? If it is indeed uPNP, how could I effectively block their torrenting without hurting everyone's use of services like Skype, Playstation Network, etc.?

  Read the article

• How share internet connection between two laptops

  - by danielgratzz

  I have what appears to be a cable modem plugged into the wall with only ONE ethernet port on it. Therefore i can only connect one computer to it. Also, it has no wireless capability. I have to dialup the connection and enter a username and password on my laptop. But how can i share this internet connection between two laptops running windows 7 ultimate? I have spare ethernet cables if that would help... Please help, thank You.

  Read the article

• How can I set my computer up for remote SSH access?

  - by FarmBoy

  I have a Linux machine that I can access by SSH from my laptop when I am inside my house, but when I am using another Internet connection, I can't connect. What do I need to do? I have Verizon DSL Internet and an ActionTec modem, if that matters. If there are other relevant facts I'm omitting, please let me know and I'll improve my question.

  Read the article

• How to set WAN side buffers for WRT54GL running Tomato Firmware

  - by Vickash

  I've recently set up a machine running m0n0wall to try and fight buffer bloat and do some traffic shaping. It was more convenient (geographically speaking) to connect the cable modem directly to my old WRT54GL, then pass everything to the m0n0wall machine and have that do the real routing work. It took a bit of work, but it's working pretty well. I have a cable connection. I have m0n0wall set up to utilize only 90% of the specified speed of my subscription, which is fine. But I've noticed that at certain times of the day (possibly when my true bandwidth drops below that 90%), there's more latency if the connection is used heavily, and traffic shaping doesn't seem to work as well. I suspect this is caused by the buffers on the WRT54GL still being unnecessarily large. If the connection is working as expected, they won't get filled, but in times of reduced bandwidth they would. Does anyone know the command I need to execute, on the WRT54GL running Tomato Firmware, to reduce the buffers on the WAN interface to the minimum size possible?

  Read the article

• Different block sizes for partition and underlying logical disk on HP Raid Controller (Linux)

  - by Wawrzek

  Following links collected in this thread I started to check blockdev and found the following output indicating different sizes for partition c0d9p1 and the underlying device (c0d9): [root@machine ~]# blockdev --report /dev/cciss/c0d9 RO RA SSZ BSZ StartSec Size Device rw 256 512 4096 0 3906963632 /dev/cciss/c0d9 [root@machine ~]# blockdev --report /dev/cciss/c0d9p1 RO RA SSZ BSZ StartSec Size Device rw 256 512 2048 1 3906959039 /dev/cciss/c0d9p1 We have a lot of small files, so yes the block size is smaller than normal. The device is a logical driver on an HP P410 raid controller, simple disk without any raid - RAID 0 on one disk to be precise. (Please note that above configuration is a feature not a bug). Therefore, I have the following questions. Can the above discrepancy in the block size affect disk performance? Can I control the block size using hpacucli?

  Read the article

• Wired network on computer to wifi

  - by user329592

  I just got myself a wifi capable cell phone, but I dont have a wireless internet at home. I do have a wired unlimited internet connection on my computer, and I wonder whether there is any gadget that I can plug into my computer (maybe at the usb port?) with which I can turn my computer into a wifi access point? I mean, a dongle or something which will enable me to connect my phone to my computer's internet through wi-fi? Also, I dont know anything about networking, so would it be hard for me to set up a secure wifi point? Thank you for reading this question through. Hope I can buy some sort of adapter which is comparitively cheap.

  Read the article

• Looking for network simulator (subnets, routers, etc..).

  - by meyosef

  Hi, I looking for network simulator (subnets, routers,wireless etc..) to study ho for interview that i have. Thanks

  Read the article

• Second WAN/LAN in office, want to share printers between them

  - by ndavis

  My business is growing so I've decided to purchase a second DSL line, to separate two departments to allow for more bandwidth usage. Previously I had a network printer that served both departments. With the addition of the second DSL line, I'm potentially going to have two separate LANs. How can I set it up so that the new LAN still has access to the Network Printer, but ensure that they are still using the new DSL line?

  Read the article

• What keeps you from changing your public IP address and wreak havok?

  - by Whitemage

  An interesting question was asked to me and I did not know what to answer.. So I'll ask here. Let's say I subscribed to an ISP and I'm using cable internet access. ISP gives me a public IP address of 60.61.62.63. What keeps me from changing this IP address to, let's say, 60.61.62.75 and mess with another consumer's internet access? For the sake of this argument, let's say that this other IP address is also owned by the same ISP. Also, let's assume that it's possible for me to go into the cable modem settings and manually change the IP address. Under a business contract where you are allocated static addresses, you are also assigned a default gaetway, a network address and a broadcast address. So that's 3 addresses the ISP "loses" to you. That seems very wastefull for dynamically assigned IP addresses where the majority of customers are.. Could they simply be using static arps? ACLs? Other simple mechanisms? Anyone who worked at an ISP would be willing to explain this a bit?

  Read the article

• Configure EasyBox (Vodafone) with DynDNS

  - by furtelwart

  How can I configure an EasyBox A601 WLAN (from Arcor resp. Vodafone) to send the IP always to DynDNS? I entered the following: Dynamic DNS [X] Diensteanbieter (DynDNS.org) Domänenname mysupersecrethost.dyndns.org (as specified in "My Host" section Konto / E-mail myaccountname Passwort mysupersecretpassword The update does not work anymore, so that my IP is not correct. The firmware is the newest available: Firmware Version: 10.02.006 (01.12.2008-11:11:59) Thanks for any hints!

  Read the article

• SOHO Netflix and network security

  - by TW

  I want to use WIFI for HiDef video, but I don't trust it for my office PC's. I've heard of VLANs but I have no idea how to set it up or what (SOHO) hardware to buy. Other than getting 2 different DSL lines, how can I be absolutely sure that the PC side doesn't get hacked? What if I want to use MS Home server as a backup device for both sides? Can I make it "read only" for the PC side, and physically change the cable if I need to restore? TW

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >