Search Results

Search found 10487 results on 420 pages for 'composite video'.

Page 111/420 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

  • Strange monitor issue - screen goes black after a few seconds

    - by Scott Szretter
    My LCD monitor display is going black (turning off). It's a Samsung SYncMaster 2233 widescreen. I am trying to figure out if there is anything I can do about it, or if the monitor is junk. I have tried multiple computers, all have the same issue. I have tried a different vga cable, same issue. Power and video cables are tight / double checked. When I power on the monitor, the blue light turns on at the bottom. Then a second or two later the video comes up as expected and it looks fine. However, about 2-3 seconds after that, the screen goes black. The blue light is still on and solid at the bottom (blue light normally flashes when the monitor is sleeping). If I power cycle the monitor, same thing happens. With no computer connected or when I unplug the vga cable, I see the searching for signal message "digital", then the screen goes black. However it usually shows "digital" then "analog" after that and switches between the two a few times. The buttons on the side do not do anything, although they may be, I just can not see if they are or not. I can usually get the "digital" message by pressing the buttons on the side, but then it quickly goes black again. What is really strange is sometimes I can get it to work fine. I am not sure what the difference is. Last week I connected it up and it worked fine and it stayed fine for at least a week! I did not turn it off or anything, I just let the OS put the display to sleep. Then this week one morning I started having the screen going black issue again. Seems like something is either loose inside or beginning to fail. Do you think there is any hope for it? update: pushing the input select button causes the "digital" and "analog" messages to flash on the screen, but only for a few seconds then it goes black. When it was working properly, those messages would flash back and fourth for probably 10-20 seconds then a message would show saying check input signal, but now just a black screen.

    Read the article

  • If Nvidia Shield can stream a game via wifi, why can I not do the same via ethernet to any other PC?

    - by Enigma
    I think it absurd that a wireless game streaming solution is the *first to hit the market when a 1000mbps+ Ethernet connection would accomplish the same feat with roughly 6x the available bandwidth. I can only assume that there must be some reason behind this or a limitation preventing this, but what? 150mbps wifi is in no way superior to a 1000mbps LAN connection aside from well wireless mobility. Not only that but I have a secondary laptop and desktop which should by hardware comparison completely outperform anything the Tegra in the Nvidia Shield can do. Is this all just a marketing scheme to force people to buy the shield for the streaming benefit? Chief among these is that NVIDIA’s Shield handheld game console will be getting a microconsole-like mode, dubbed “Shield Console Mode”, that will allow the handheld to be converted into a more traditional TV-connected console. In console mode Shield can be controlled with a Bluetooth controller, and in accordance with the higher resolution of TVs will accept 1080p game streaming from a suitably equipped PC, versus 720p in handheld mode. With that said 1080p streaming will require additional bandwidth, and while 720p can be done over WiFi NVIDIA will be requiring a hardline GigE connection for 1080p streaming (note that Shield doesn’t have Ethernet, so this is presumably being done over USB). Streaming aside, in console mode Shield will also support its traditional local gaming/application functionality. - http://www.anandtech.com/show/7435/nvidia-consolidates-game-streaming-tech-under-gamestream-brand-announces-shield-console-mode ^ This is not acceptable for me for a number of reasons not to mention the ridiculousness of having a little screen+controller unit sitting there while using a secondary controller and screen instead. That kind of redundant absurdity exemplifies how wrong of a solution that is. They need a second product for this solution without the screen or controller for it to make sense... at which point your just buying a little computer that does what most other larger computers do better. All that is required, by my understanding, is the ability to decode H.264 video compression and transmit control/feedback so by any logical comparison, one (Nvidia especially) should have no difficulty in creating an application for PC's (win32/64 environment) that does the exact same thing their android app does. I have 2 video cards capable of streaming (encoding) H.264 so by right they must be capable of decoding it I would think. I haven't found anything stating plans to allow non-shield owners to do this. Can a third party create this software or does it hinge on some limitation that only Nvidia can overcome? (*) - perhaps this isn't the first but afaik it is the first complete package.

    Read the article

  • JPA entities -- org.hibernate.TypeMismatchException

    - by shane lee
    Environment: JDK 1.6, JEE5 Hibernate Core 3.3.1.GA, Hibernate Annotations 3.4.0.GA DB:Informix Used reverse engineering to create my persistence entities from db schema [NB:This is a schema in work i cannot change] Getting exception when selecting list of basic_auth_accounts org.hibernate.TypeMismatchException: Provided id of the wrong type for class ebusiness.weblogic.model.UserAccounts. Expected: class ebusiness.weblogic.model.UserAccountsId, got class ebusiness.weblogic.model.BasicAuthAccountsId Both basic_auth_accounts and user_accounts have composite primary keys and one-to-one relationships. Any clues what to do here? This is pretty important that i get this to work. Cannot find any substantial solution on the net, some say to create an ID class which hibernate has done, and some say not to have a one-to-one relationship. Please help me!! /** * BasicAuthAccounts generated by hbm2java */ @Entity @Table(name = "basic_auth_accounts", schema = "ebusdevt", catalog = "ebusiness_dev", uniqueConstraints = @UniqueConstraint(columnNames = { "realm_type_id", "realm_qualifier", "account_name" })) public class BasicAuthAccounts implements java.io.Serializable { private BasicAuthAccountsId id; private UserAccounts userAccounts; private String accountName; private String hashedPassword; private boolean passwdChangeReqd; private String hashMethodId; private int failedAttemptNo; private Date failedAttemptDate; private Date lastAccess; public BasicAuthAccounts() { } public BasicAuthAccounts(UserAccounts userAccounts, String accountName, String hashedPassword, boolean passwdChangeReqd, String hashMethodId, int failedAttemptNo) { this.userAccounts = userAccounts; this.accountName = accountName; this.hashedPassword = hashedPassword; this.passwdChangeReqd = passwdChangeReqd; this.hashMethodId = hashMethodId; this.failedAttemptNo = failedAttemptNo; } public BasicAuthAccounts(UserAccounts userAccounts, String accountName, String hashedPassword, boolean passwdChangeReqd, String hashMethodId, int failedAttemptNo, Date failedAttemptDate, Date lastAccess) { this.userAccounts = userAccounts; this.accountName = accountName; this.hashedPassword = hashedPassword; this.passwdChangeReqd = passwdChangeReqd; this.hashMethodId = hashMethodId; this.failedAttemptNo = failedAttemptNo; this.failedAttemptDate = failedAttemptDate; this.lastAccess = lastAccess; } @EmbeddedId @AttributeOverrides( { @AttributeOverride(name = "realmTypeId", column = @Column(name = "realm_type_id", nullable = false, length = 32)), @AttributeOverride(name = "realmQualifier", column = @Column(name = "realm_qualifier", nullable = false, length = 32)), @AttributeOverride(name = "accountId", column = @Column(name = "account_id", nullable = false)) }) public BasicAuthAccountsId getId() { return this.id; } public void setId(BasicAuthAccountsId id) { this.id = id; } @OneToOne(fetch = FetchType.LAZY) @PrimaryKeyJoinColumn @NotNull public UserAccounts getUserAccounts() { return this.userAccounts; } public void setUserAccounts(UserAccounts userAccounts) { this.userAccounts = userAccounts; } /** * BasicAuthAccountsId generated by hbm2java */ @Embeddable public class BasicAuthAccountsId implements java.io.Serializable { private String realmTypeId; private String realmQualifier; private long accountId; public BasicAuthAccountsId() { } public BasicAuthAccountsId(String realmTypeId, String realmQualifier, long accountId) { this.realmTypeId = realmTypeId; this.realmQualifier = realmQualifier; this.accountId = accountId; } /** * UserAccounts generated by hbm2java */ @Entity @Table(name = "user_accounts", schema = "ebusdevt", catalog = "ebusiness_dev") public class UserAccounts implements java.io.Serializable { private UserAccountsId id; private Realms realms; private UserDetails userDetails; private Integer accessLevel; private String status; private boolean isEdge; private String role; private boolean chargesAccess; private Date createdTimestamp; private Date lastStatusChangeTimestamp; private BasicAuthAccounts basicAuthAccounts; private Set<Sessions> sessionses = new HashSet<Sessions>(0); private Set<AccountGroups> accountGroupses = new HashSet<AccountGroups>(0); private Set<UserPrivileges> userPrivilegeses = new HashSet<UserPrivileges>(0); public UserAccounts() { } public UserAccounts(UserAccountsId id, Realms realms, UserDetails userDetails, String status, boolean isEdge, boolean chargesAccess) { this.id = id; this.realms = realms; this.userDetails = userDetails; this.status = status; this.isEdge = isEdge; this.chargesAccess = chargesAccess; } @EmbeddedId @AttributeOverrides( { @AttributeOverride(name = "realmTypeId", column = @Column(name = "realm_type_id", nullable = false, length = 32)), @AttributeOverride(name = "realmQualifier", column = @Column(name = "realm_qualifier", nullable = false, length = 32)), @AttributeOverride(name = "accountId", column = @Column(name = "account_id", nullable = false)) }) @NotNull public UserAccountsId getId() { return this.id; } public void setId(UserAccountsId id) { this.id = id; } @OneToOne(fetch = FetchType.LAZY, mappedBy = "userAccounts") public BasicAuthAccounts getBasicAuthAccounts() { return this.basicAuthAccounts; } public void setBasicAuthAccounts(BasicAuthAccounts basicAuthAccounts) { this.basicAuthAccounts = basicAuthAccounts; } /** * UserAccountsId generated by hbm2java */ @Embeddable public class UserAccountsId implements java.io.Serializable { private String realmTypeId; private String realmQualifier; private long accountId; public UserAccountsId() { } public UserAccountsId(String realmTypeId, String realmQualifier, long accountId) { this.realmTypeId = realmTypeId; this.realmQualifier = realmQualifier; this.accountId = accountId; } @Column(name = "realm_type_id", nullable = false, length = 32) @NotNull @Length(max = 32) public String getRealmTypeId() { return this.realmTypeId; } public void setRealmTypeId(String realmTypeId) { this.realmTypeId = realmTypeId; } @Column(name = "realm_qualifier", nullable = false, length = 32) @NotNull @Length(max = 32) public String getRealmQualifier() { return this.realmQualifier; } public void setRealmQualifier(String realmQualifier) { this.realmQualifier = realmQualifier; } @Column(name = "account_id", nullable = false) public long getAccountId() { return this.accountId; } public void setAccountId(long accountId) { this.accountId = accountId; } Main Code for classes are:

    Read the article

  • Ubuntu: Failure to login with multiple video adapters

    - by tsilb
    Forgive my ignorance, for I am a complete linux noob. I have a computer with three video cards and six monitors. Works great on Windows. Trying to get it to run Ubuntu as well. It loads fine when I have it configured to run on one adapter; detects both screens, runs ok. But I want to turn the other 4 monitors on and run the whole thing as one extended desktop (one session, etc). So I downloaded and installed the newest ATI driver for Linux, which seems to work, kinda. I ran this to set up the screens: aticonfig --adapter=all --initial -f Now when I boot, Ubuntu seems to turn on all the screens (3 viewports, each with two cloned displays from what I can tell). When I enter my login info OR move the mouse off the main screen, the screens freeze and the kbd/ms become unresponsive. aticonfig generated xorg.conf included below. Have tried the following: aticonfig -initial -f - works, but only detects the primary adapter and 2 screens aticccle - Tells me I have to reboot after enabling the other cards. Then goes into above described freezing state. aticonfig --adapter=all --initial -f - see above Manually editing xorg.conf file with my limited knowledge - Was able to get two adapters running, but only the second adapter initialized while the primary stopped at the Ubuntu boot screen. Was unable to see the login prompt. Froze after I logged in blindly (was able to hear the login sound). Using generic "radeon" driver instead of ATI Proprietary driver with the above init attempts Toggling xinerama Various combinations of the above Hardware: Intel Core 2 Quad q6600 8GB DDR2 (3x) ATI Radeon HD 4680 5 monitors (21W, 21W, 22W Portrait, 22W Portrait, 19")and an HDTV (26"W, HDMI) in a horizontal arrangement I know next to nothing about Linux/Ubuntu aside from basic filesystem navigation, editing text files, and accessing my local and networked Windows stores and shares. Basically this is the most advanced thing I've had to do. I installed today. Please advise how to make this configuration work. my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[2]-0" RightOf "aticonfig-Screen[1]-0" Option "RenderAccel" "true" Option "AllowGLXWithComposite" "true" EndSection Section "Files" EndSection Section "Module" EndSection Section "ServerFlags" Option "Xinerama" "0" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[2]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "aticonfig-Device[2]-0" Driver "fglrx" BusID "PCI:4:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[2]-0" Device "aticonfig-Device[2]-0" Monitor "aticonfig-Monitor[2]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • LDAP groups not applying to filesystem permissions

    - by BeepDog
    System is ArchLinux, and I'm using nss-pam-ldapd (0.8.13-4) to connect myself to ldap. I've got my users and some groups in LDAP: [root@kain tmp]# getent group <localgroups snipped> dkowis:*:10000: mp3s:*:15000:rkowis,dkowis music:*:15002:rkowis,dkowis video:*:15003:transmission,rkowis,dkowis,sickbeard software:*:15004:rkowis,dkowis pictures:*:15005:rkowis,dkowis budget:*:15006:rkowis,dkowis rkowis:*:10001: And I have some directories that are setgid video so that the video group stays, and they're configured g=rwx so that members of the video group can write to them: [root@kain video]# ls -ld /srv/video drwxrwxr-x 8 root video 208 Oct 19 20:49 /srv/video However, members of that group, say dkowis cannot write into that directory: [root@kain video]# groups dkowis mp3s music video software pictures dkowis Total number of groups that dkowis is in is like 7, I redacted a few here. [dkowis@kain wat]$ cd /srv/video [dkowis@kain video]$ touch something touch: cannot touch 'something': Permission denied [dkowis@kain video]$ groups dkowis mp3s music video software pictures I'm at a loss as to why my groups show up in getent groups, but my filesystem permissions are not being respected. I've tried making a new directory in /tmp and setting it's group permissions to rwx, and then trying to write a file in there, it doesn't work. The only time it does work is if I open it wide up allowing o=rwx. That's obviously not what I want, and I'm not able to figure out what my missing piece is. Thanks in advance.

    Read the article

  • To connect Gstreamer with Qt in order to play a gstreamer video in the Qt Widget

    - by raggio
    I tried using phonon to play the video but could not succeed. Off-late came to know through the Qt forums that even the latest version of Qt does not support phonon. Thats when i started using Gstreamer.Any suggestions as to how to connect the Gstreamer window with the Qt widget?My aim is to play a video using Gstreamer on the Qt widget.So how do i link the gstreamer window and the Qt widget? I am successful in getting the Id of the widget through winid(). Further with the help of Gregory Pakosz, I have added the below 2 lines of code in my application - QApplication::syncX(); gst_x_overlay_set_xwindow_id(GST_X_OVERLAY(sink), widget->winId()); However am not able to link the Qt widget with the gstreamer video window. This is what my sample code would look like :- int main(int argc, char *argv[]) { printf("winid=%d\n", w.winId()); gst_init (NULL,NULL); /* create a new bin to hold the elements */ bin = gst_pipeline_new ("pipeline"); /* create a disk reader */ filesrc = gst_element_factory_make ("filesrc", "disk_source"); g_assert (filesrc); g_object_set (G_OBJECT (filesrc), "location", "PATH_TO_THE_EXECUTABLE", NULL); demux = gst_element_factory_make ("mpegtsdemux", "demuxer"); if (!demux) { g_print ("could not find plugin \"mpegtsmux\""); return -1; } vdecoder = gst_element_factory_make ("mpeg2dec", "decode"); if (!vdecoder) { g_print ("could not find plugin \"mpeg2dec\""); return -1; } videosink = gst_element_factory_make ("xvimagesink", "play_video"); g_assert (videosink); /* add objects to the main pipeline */ gst_bin_add_many (GST_BIN (bin), filesrc, demux, vdecoder, videosink, NULL); /* link the elements */ gst_element_link_many (filesrc, demux, vdecoder, videosink, NULL); gst_element_set_state(videosink, GST_STATE_READY); QApplication::syncX(); gst_x_overlay_set_xwindow_id(GST_X_OVERLAY(videosink), w.winId()); /* start playing */ gst_element_set_state (bin, GST_STATE_PLAYING); } Could you explain more in detail about the usage of gst_x_overlay_set_xwindow_id() wrt my context? Could i get any hint as to how i can integrate gstreamer under Qt? Please help me solve this problem

    Read the article

  • HTTP Live Streaming, FFMPEG & FFSERVER, and iPhone OS 3

    - by jcnnghm
    In iPhone OS 3, Apple has introduced HTTP Live Streaming which should allow live streaming of video from the internet. I am currently operating a webcam, which feeds into my server, and is then converted into a flv stream by ffmpeg, and streamed back out using ffserver. Does anyone know how to setup a video stream the iPhone can use using ffmpeg and ffserver? I should be able to re-encode into just about any format on the fly.

    Read the article

  • video file download issue

    - by George2
    Hello everyone, I am using VSTS 2008 + C# + .Net 3.5 + Silverlight 3.0 + ASP.Net to develop a Silverlight application (a video media player) in browser and the function is simple, just use MediaElement to play a remote video file. The remote server is Windows Server 2008 + IIS 7.0 + IIS Media Bit Rate Throttling Control. Since the request media URL can be discovered (e.g. from traffic sniffer), and I want to know how to prevent from download directly from the Url? i.e. I want end user to use my Silverlight media player application in browser to play the file, prevent them from download to local directly. Any easy and quick solution or reference code/documents? thanks in advance, George

    Read the article

  • ipad video format

    - by Mike
    When you use iTunes to sync your videos with the iPhone the videos are always saved with no more than 640 pixels wide, if I am not wrong. What about the iPad? What is the size of videos iTunes syncs with iPad? 1024x768? and what if the video has a dimension below 1024x768? Will it scale up? or will it keep the video at low res and scale when you play? The question is because I am using the MPMoviePlayerController and I need to know what resolutions to expect, so I can adjust the interface. thanks.

    Read the article

  • H.264 in Firefox

    - by illuminatedtiger
    Hi all, As I understand it Firefox does not support H.264 encoded video using the tag. I've been told that Flash will quite happily handle such content however I have no experience with Flash nor do I have access to Adobe Creative Suite. I'm developing primarily for Firefox users and recoding our video content to OGG would not be practical. What are my options?

    Read the article

  • ipad video format [closed]

    - by Mike
    When you use iTunes to sync your videos with the iPhone the videos are always saved with no more than 640 pixels wide, if I am not wrong. What about the iPad? What is the size of videos iTunes syncs with iPad? 1024x768? and what if the video has a dimension below 1024x768? Will it scale up? or will it keep the video at low res and scale when you play? thanks.

    Read the article

  • OpenCV videos across platform

    - by Gurman Gill
    I am writing a video using OpenCV on linux machine. I want to read the same video using OpenCV on a windows machine. I am not able to do this using the standard codecs provided in openCV. Can anybody suggest how I can read/write videos across the two platforms?

    Read the article

  • how to use lightbox2 to show video in my page

    - by Mithun Madhav
    Hi I want to show a popup you tube video player in my web page.I downloaded lighbox from the following link: http://ftp.drupal.org/files/projects/lightbox2-6.x-1.11.zip I extracted the zip file into my sites root I added the following lines in my page header: <link type="text/css" rel="stylesheet" media="all" href="/lightbox2/css/lightbox.css?1" / <script type="text/javascript" src="/lightbox2/js/auto_image_handling.js?1"></script> <script type="text/javascript" src="/lightbox2/js/lightbox_video.js?1"></script> <script type="text/javascript" src="/lightbox2/js/lightbox.js?1"></script> and the following in the body <a href="http://www.youtube.com/watch?v=0gBtF_awV2o" rel=lightvideo[width:500px;height:400px;] <img src="sample" alt="Live TV" But the video opens up in a new tab and not as a popup.Where am i going wrong?I cant find tutorials for this anywhere, although i have this kind of code in many other pages with popup videos.

    Read the article

  • Flash video hiding the cursor on Mac OS X

    - by Tibor
    I found a Core Graphics function, CGCursorIsVisible, that one can use to determine whether the mouse cursor is shown on screen. I have a small app that uses a timer to call that function a few times a second to see if the cursor is shown or hidden (as I found no way to get my app notified when the mouse cursor shown/hidden status changes). The above works correctly except… when the Flash browser plugin plays a video: the mouse cursor gets hidden after a few seconds of mouse inactivity but CGCursorIsVisible() still keeps telling me that the cursor is indeed shown as if nothing happened. What I need is to be able to tell, at any given moment, whether the mouse cursor is shown to the end user on any screen. Is there any way to do that even in the case of playing a video using the Flash plugin?

    Read the article

  • Error Playing video from server with MPMoviePlayerController

    - by skiria
    I try to play a video on the server with this code. I have a error. //Play the video from server - (IBAction)playVideo:(id)sender; { NSLog(@"URLVIDEO %@", aVideo.urlVideo); MPMoviePlayerController *VideoPlayer = [[MPMoviePlayerController alloc]initWithContentURL:[NSURL URLWithString:aVideo.urlVideo]]; [VideoPlayer play]; } //Error on con console Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: 'Content URL must not be nil.' aVideo.urlVideo is a NSString and it's correct when I copy the result on the NSLog on the browser.

    Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >