Search Results

Search found 48997 results on 1960 pages for 'i ask questions for a reason'.

Page 111/1960 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

  • Unsure about TRIM enabled on my SSD

    - by user84750
    I have a SSD OCZ Vertex4 installed on my laptop. I'm running Ubuntu 12.04 LTS. I have enable TRIM by adding "discard" to my fstab file. (also added option noatime). I rebooted my Ubuntu and followed These instructions here to test TRIM. The end results of my tempfile was all ffff's, when it should have read all zero's, which is telling me TRIM is not really working or enabled correctly. Did I miss something? Also, will it be a problem if only my /home directory is encrypted. AND if you ask why I have swap on my SSD, it's because I let Ubuntu set up my partition. When I have my SSD, I just wanted to install Ubuntu as fast as possible. =) I've done testing to see at which point it will start to use swap and it took a lot of applications open to finally use swap. I currently have 4 GB of memory. I might shrink this to like 512 MB or 1 GB the most. Here's some info about my file system setup. sudo hdparm -I /dev/sda1 | grep "TRIM supported" Data Set Management TRIM supported (limit 16 blocks) sudo fdisk -l /dev/sda Device Boot Start End Blocks Id System /dev/sda1 * 2048 242016255 121007104 83 Linux /dev/sda2 242018302 250068991 4025345 5 Extended /dev/sda5 242018304 250068991 4025344 82 Linux swap / Solaris ls /dev/mapper control cryptswap1

    Read the article

  • Any danger in using the Wine workaround in 12.04?

    - by TrailRider
    To run certain Windows programs in WINE you need to this workaround: echo 0|sudo tee /proc/sys/kernel/yama/ptrace_scope According to the support websites, this is due to a bug in the Ubuntu kernel that prevents ptrace and WINE playing well together. Using the above command you set the ptrace to 0 which according the research I've done(don't ask me which websites, I have seem a lot of them), ptrace has to do with the interactions between programs. The 0 setting is more permissive than the 1. I have to assume that there was a good reason Ubuntu wanted the ptrace=1 so this leads me back to the short form of the question. Are there any risks involved in setting ptrace=0. Lower security? problems debugging? any others that I haven't thought of??? P.S. for anybody reading this that wonders what the bug causes, the Windows programs will fail to open at all, in the System Monitor you will see many instances of the program trying to open and then they will eventually all quit and if you run the progam for the terminal you will get an error that tells you that the maximum number of program instances has been reached.

    Read the article

  • How to connect ethernet on ubuntu (with auto-detection by Ubuntu)

    - by user12285
    Do I need to post another thread for the same? If so, sorry. Yes, I saw that it's been well over six months but I have the same router SmartAX MT880d with ethernet, and the exact same problem, that is no internet even though I can successfully reach the modem settings page by entering 192.168.1.1 in Firefox. Sorry if I don't use the right (technical) terminology to express my issue. English is not my mother tongue. I'm a total beginner with ubuntu. My internet works great in Windows but does not work in Ubuntu. For 2 weeks, I've kept reading on the web and forums and the ubuntuguide.org to name a few but to no avail. Now I see no other solution but to ask for help. My problem is that as a beginner, I can't find a way to put the right digits in the right place because I don't know what numbers I need to put in what files (eg: do I need to use DHCP? or a static IP address? No clue whatsoever. I'm confused between putting figures in the wrong spaces. For example, is the modem/router's IP exactly 192.168.1.1 for Huawei Smart AXMT880d modem?? Is the subnet 255.255.255.0? Gateway 192.168.1.1. I'm confused as I can also see a different IP starting with 155131*** (is it an account number? no clue again) on my contract with Huawei (a Chinese ISP). Apart from calling 911, what other numbers do I need to put in and where? How do I check that all the numbers have been entered correctly in every appropriate space before trying to connect the Internet?

    Read the article

  • I just recursively chmod'd everything under / to 750. Any tips?

    - by Ouairz
    I won't be the first and I won't be the last, I suppose. While playing around with the find command, I made a whoops and it would appear that instead of changing the permissions of the ~/web directory to 750, it changed the permissions of the entire filesystem (/) to 750, however I'm not certain, but any attempt to investigate is thwarted by Permission denied messages. For everything. This was the offending command: sudo find ~/web . type d -exec chmod 750 {} If I'm not mistaken, the Ubuntu team disabled root logins as a safety precaution so I'm out of ideas. I'm (obviously) a total newbie when it comes to file permissions so I was wondering if anyone had some good or even some bad advice to share. I've mentally prepped myself to losing everything on the computer which is only of mild consequence, since I have backups, but I did do a bit of work on this box over the week and it would be a shame to lose it all due to a boneheaded mistake. If you are reading this message, ask yourself, have you backed up any of your work recently? Thanks in advance for any insights. Feel free to scold me for using sudo carelessly

    Read the article

  • Triple-display setup using AMD drivers

    - by Halik
    I am currently running a dual display setup with nVidia 8800GTS video card, on a Ubuntu 12.10 box. The current setup uses nVidia TwinView to render the image on a 1920x1200 display and 1600x1200 one. I'm planning to add a third, 1280x1024 display to the setup. The change will require me to upgrade my GFX card to one supporting triple displays. I'll probably go with Sapphire Radeon 7770 (FLEX edition, to avoid additional active DP-DVI adapters). Before I invest in new GFX I wanted to ask - how well the AMD drivers will support such a setup. It does not matter whether it's fglrx or the OSS ones. If I remember correctly, when running Fedora on a Radeon x800, I had 'void' areas above and below the working area on my second display. The desktop was rendered in 1920+1280 width and 1200 height (which left 176px of vertical space accessible for my cursor and windows but not displayed on the screen - I'd prefer to avoid that). It may have very well been my misconfiguration back then. Generally, are there any solutions from AMD on par with TwinView? Or is it a non-issue at all? Also, I'm wondering about the usual stuff - hardware h264 decoding support, glitch-free flash support, any issues with Compiz/Unity?

    Read the article

  • Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

    - by Korakys
    Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

    Read the article

  • slow virtualbox guest

    - by ecoologic
    I run a guest ubuntu 12.04 on a host ubuntu 12.04, with virtual box, and the guest is much, much slower than the host (ALT+TAB costs 4-5secs). I had a look around and I found contradicting opinions on virtualbox vs vmware (free), so I taught to keep the former. Both systems are updated, I installed the additions on the guest and I evenly split memory and video memory (64mb) between guest and host. I am running a toshiba m200 laptop with 4GB ram and shared video memory. The host bios does not include a configuration option for machine virtualization. I have 2 cpus and I can't give them both to the vm. Is there anything I overlooked that could solve my problem? Feel free to ask for more info, and thank you for any help. EDIT Idling with the monitor open the (single) guest cpu never gets below 55% and could raise to 80 - 90% just moving the mouse around, opening ff will cause the monitor to run 100% in the guest, while the host shows that both cpus are evenly working around 60%. My cpu is Intel® Core™2 Duo CPU T5450 @ 1.66GHz × 2. If this is not a configuration problem, does it mean my machine is too weak for virtualization?

    Read the article

  • What should be the path for storing Maildir e-mails?

    - by Thufir
    Am I storing e-mails to the correct path? Working from the dovecot-postfix package I'm able to deliver e-mails to myself as so: thufir@dur:~$ thufir@dur:~$ telnet localhost 25 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 dur.bounceme.net ESMTP Postfix (Ubuntu) HELO me 250 dur.bounceme.net mail from:<[email protected]> 250 2.1.0 Ok rcpt to:<thufir@localhost> 250 2.1.5 Ok data 354 End data with <CR><LF>.<CR><LF> subject: to evolution mail we'll see if this goes through. . 250 2.0.0 Ok: queued as 43D6F2A07C1 quit 221 2.0.0 Bye Connection closed by foreign host. thufir@dur:~$ and then here's the message: thufir@dur:~$ ll Maildir/new/ total 20 drwx------ 2 thufir thufir 4096 Nov 16 18:56 ./ drwx------ 5 thufir thufir 4096 Nov 16 18:56 ../ -rw------- 1 thufir thufir 410 Nov 16 11:57 1353095866.M305477P3932.dur,S=410,W=422 -rw------- 1 thufir thufir 424 Nov 16 17:20 1353115248.M841336P2990.dur,S=424,W=436 -rw------- 1 thufir thufir 445 Nov 16 18:56 1353121003.M187706P3838.dur,S=445,W=457 thufir@dur:~$ thufir@dur:~$ nl Maildir/new/1353121003.M187706P3838.dur\,S\=445\,W\=457 1 Return-Path: <[email protected]> 2 X-Original-To: thufir@localhost 3 Delivered-To: thufir@localhost 4 Received: from me (localhost [127.0.0.1]) 5 by dur.bounceme.net (Postfix) with SMTP id 43D6F2A07C1 6 for <thufir@localhost>; Fri, 16 Nov 2012 18:55:55 -0800 (PST) 7 subject: to evolution mail 8 Message-Id: <[email protected]> 9 Date: Fri, 16 Nov 2012 18:55:55 -0800 (PST) 10 From: [email protected] 11 we'll see if this goes through. thufir@dur:~$ Do I perhaps have postfix misconfigured? I ask because evolution seems to use a different path for mail.

    Read the article

  • Ubuntu Unity (64-bit) Bugs on Nvidia dual screen [closed]

    - by Kristofer
    On my work computer I have upgraded 10.04 to 10.10 and now to 11.04. Upgrades have mostly worked well and the dual screen setup is almost working. There are however a couple of annoying bugs which I tried to report but the bug reporting tool told me to ask about the bugs here. Here's what I have found: Auto-hide stops working. It doesn't seem to matter which application is maximised/covering the dock, it just stays on top. I have tested changing the autohide settings with no result. Scenario: One maximised window on each screen. If I now try to drag the window that doesn't have focus by dragging the top of the window nothing happens. I can also not give the window focus by clicking the top bar, I have to click inside the window and then I can drag the window. If I unmaximise the window with focus it does work and I can both change focus and drag the window directly by clicking the top of the maximised window. Any bug fixes coming for these issues? Any work-arounds?

    Read the article

  • Why won't my graphics work in Ubuntu 12.04 LTS?

    - by user170974
    I'm very new to Ubuntu and to Linux in general, and took the leap and formatted my PC to Ubuntu 12.04 LTS very recently :) I seem to be having some trouble getting my graphics card to run properly, I looked over what information I could find but I still cannot get it up and running and figured this was a good place to ask for help. The information I can find on my graphics is as follows: (Terminal command) lspci outputs: 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] I tried using a mixture of the following links: How do I fix my installation of ATI Catalyst Video Driver in 12.04 LTS? What is the correct way to install ATI Catalyst Video Drivers (fglrx)? Ubuntu Precise Installation Guide But it does not seem to work, since running fglrxinfo in terminal gives: display: :0.0 screen: 0 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301) OpenGL version string: 1.4 (2.1 Mesa 9.0.3) What am I doing wrong here? All help appreciated ;) Edit: I have tried the legacy driver from www2.ati.com/drivers/linux/amd-driver-installer-catalyst-13-4-linux-x86.x86_64.zip I also tried the guide at https://launchpad.net/~makson96/+archive/fglrx which caused the system to crash (blackscreen, no boot) Neither seemed to work. I did however reinstall ubuntu 12.04 LTS, and re-tried both with no success. Reintalling ubuntu did however fix the broken dependencies problems, etc.

    Read the article

  • SSD on USB 3.0 doesnt always mount

    - by juergen
    I would like to ask you for some support for this issue. The SSD I use is apparently slightly damaged. Atm it shows this popular Corsair Series 3 problem. symptom: the disk is working for some minutes and then just suddenly stops. Two months ago it worked like a charm. This was my boot device in these days. So now I still need to copy some data out of the device which leads me to my question. Usually the SSD is working again for some minutes, when i unplug and replug its power. It gets detected by the system again and I can continue my backup. The problem on Ubuntu is, that it is not recognized again after two or three replugs. I have to reboot to bring it back. To specify this situation: when i unplug and replug my USB mouse before i reboot it is not recognized as well. So something seems to be wrong with the system also. my question: how do i fix this rebooting issue? I will post all the logs you need to analyse. The problem doesnt depend on the interface. I tried USB3.0, 2.0 and Sata already. Thank you! cheers my system: Ubuntu 11.10, Gigabyte G41MT-S2P, Intel E6750 Corsair Force Series 2 - F120, Digitus USB 3.0 Adapter, USB 3.0 interface card

    Read the article

  • how do I fix ati driver issue

    - by Michael
    I have little knowledge about ubuntu, but I am learning. Recently, my ubuntu 12.04 required that I update. I noticed that it was updating xorg and other things, after the update I was asked to reboot. I did. now when I start that computer up, it cannot detect any display and refuses to boot from usb. I have no idea how to recover my computer. It simply starts in what is akin to the terminal program and ask for my username and password. After that, I can enter commands. The problem may be because I manually installed drivers by copy pasting from some instructional that I now have no idea where they are, but what it amounts to is that I "built" the drivers. They were working GREAT until this update. I did this because otherwise I was unable to have sound through my hdmi. After I hand built the drivers, they worked great. After this update Ka-blam! nothing... Also, I had okay-ed lots of update sources (though all of them [xorg and such] were the stable versions, not the unstable update sources) Please help and thank you in advance. (if this is posted incorrectly or misplace, please let me know what to do)

    Read the article

  • what other bash variables are available during execution such as $USER that can assist on my script?

    - by semi-newbie
    This is related to question 19245, in that one of the responders answered the question in an awesome way, and very VERY clear to any newbie. Now here is a question that i can't seem to figure. i wrote a script for starting the vmware firefox plugin (don't worry. i gave that up and now run vBox VERY happily. i left vmware for my servers :) ) I needed to start the plugin as sudo, but i also needed to pass an argument (password) to it, that happen to be the same. So, if my password was Hello123, the command would be: sudo ./myscript.sh hi other Hello123 running from command line, the script would ask for my sudo password and then run. i wanted to capture THAT password and pass it as well. i also wanted to run graphically, so i tried gksudo, and there is an option -p that returns the password for variable assignment. well, that was a nightmare, because i would still get prompted for the original sudo: see below Find UserName vUser=$USER Find password (and hopefully enable sudo) vP=gksudo -p -D somedescriptiontext echo Execute command gksudo ./myscript.sh hi $vUser $vP and i still get prompted twice. so my question is tri-fold: is there a variable i can use for the password, just like there is one for user, $USER? is there a different way i should be assigning the value resulting of the command i have in $vP? i am wondering if executing the way i have it, does it in an uninitiated session and not the current one, since i am getting some addtl warning type errors on some variables blah blah i tried using Zenity to just capture the text, but then of course, i couldn't pass that value to sudo, so i could only use as a parameter, which puts me back in 2 prompts. Thanksssssssssss!

    Read the article

  • Wifi won't connect to certain networks

    - by Dave M G
    As I write this, I'm in a coffee shop on my laptop, and I am trying to connect to the free wifi network they offer. Every time I select their network from the wifi applet drop down menu, it connects for a second and then disconnects. At the same time, I have my Android phone with me, and it connects to the coffee shop's network without problem. There are a couple of people around me also using the same network with no issues. I asked the staff to check and as far as they can tell there is no problem with their router or anything. I have tried rebooting, but it has not made a difference. I have double and triple checked that I am using the correct WEP password. As an added wrinkle, when I connect to another network, it seems to connect (although I can't use them because they are paid gateway services). So I'm able to ask this question now because I have tethered my laptop to my phone, but it's slow and a workaround, not a solution. All indications are that it's a problem with my computer against this one network. Why would that be and how can I fix it?

    Read the article

  • Headphones not working in ubuntu 12.04LTS

    - by mursalat
    So after a million warnings about not supported ubuntu OS, last night I finally upgraded to 12.04 - went somewhat smoothly (sadly) After my installation I got all excited with the exciting new look when I login, and all the new shebang, gently I installed chrome and went to youtube to check out some of my music and test flash in the process, now the sound worked awesomely, however when I plugged in my headphones, I could hear only a buzz-like sound when the base drops or there is a loud noise, maybe I didn't hear it from the headphones, but some other source. However sadly my headphones are not working, and I am a noob at fixing these stuff on Ubuntu. I've done loads of programming but when it comes to linux drivers and settings I seem to get frustrated. So I would really appreciate any help people! IN SUMMARY: My headphones are not working, my laptop's internal speakers are working awesome. To be as helpful as I can I have pasted the output from lspci -v to http://pastebin.com/VQNzDkZs I have also checked the volume levels from alsamixer and none are on mute. If you need any more information, please just ask, and I will be checking this post every 3 to 4 hours! Cheers!

    Read the article

  • How can I have sound output before logging in?

    - by ??O?????
    I have a machine (Ubuntu 11.10) that I would like to have it play audio (typically through an amplifier), but the machine should be headless (where its final placement will be). I will control what is played through ssh. However, there is no sound output until I login to the graphical console. At first I thought it was an issue with pulseaudio, so I promptly removed it to use the default ALSA, but I have the same issues. I ssh to the machine, I run alsamixer and get the typical cannot open mixer: No such file or directory error (while /proc/asound/cards display correctly what I have). If I login on the graphical console, alsamixer works fine in the ssh session, and I have sound output. I logout, and then alsamixer stops working. So something runs (Xsession perhaps?) when I login that enables sound output, and gets disabled when I logout. I remember in older versions of Ubuntu, there was a drum roll when the machine showed the login screen; that is not the case anymore. Perhaps if I somehow can enable that drum roll, I'll have fixed my problem too. In any case, the question I ask is what the title says.

    Read the article

  • No audio in Google Chrome

    - by Z9iT
    I started with Ubuntu 12.04 Minimal. Then installed only 3 utils sudo apt-get install xorg xinit google-chrome-stable alsa-base alsa-utils alsa-oss I have added google-chrome to .xinitrc file. Used sudo alsamixer to unmute everything using M. Also I am able to hear sound when I run this independently in a terminal sudo aplay /usr/share/sounds/alsa/Front_Center.wav However Google Chrome is not giving any sound output be it on youtube or the same file (/usr/share/sounds/alsa/Front_Center.wav) opened by browsing in chrome. UPDATE : the moment i install some Desktop (display) Manager like gnome or lxde and launch chrome then, the audio is perfect success. However if i kill the xsession and the desktop manager (lxde) AND then start with loading only the chrome (without DM) then again i loose the sound. This makes me wonder that there is something which is not allowing the sound to be loaded into chrome directly, but once the session like lxde loads, then it works flawless. I am thinking that i should rather ask, how to authorize google-chrome to use sound software? Miscellaneous : I am surprised to know that I cannot start google-chrome by sudo command (it asks to be a normal user) && that i cannot start alsamixer as a normal user (i must use sudo alsamixer ) May someone please help what i need to do so that google chrome speaks????

    Read the article

  • Laptop power button not working

    - by DyP
    I have a (seemingly rather exotic) Dell Latitude XT2 notebook running Lubuntu 12.04, fresh install. Tried to get the power button to work as expected (opening lubuntu-logout, just as I think it was meant to be out-of-the box), but no success: power button does nothing but forced power-off on long press. Here some more information, please ask if something more could help: Power button is recognized as a device: xinput lists Power Button as a slave keyboard at /dev/input/event1, and I can run a tool to listen to that device and invoke some action (successfully). But using .config/openbox/lubuntu-rc.xml to assign some action to XF86ShutDown or XF86PowerOff does nothing. Works well for any key of the keyboard. xinput --test reports a keycode (key press, key release) of 124 when pressing & releasing the power button. xmodmap -pk lists 124 mapped to XF86PowerOff which seems correct to me (btw: is this the same as XF86ShutDown?) When assigning another keysymname to the 124 keycode, e.g. 'w', still nothing happens when pressing the power button (no window seems to receive a 'w'). Works well for any key on the keyboard. The outputs of xev for a press/release of the power button irritate me: MappingNotify event, serial 41, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 41, synthetic NO, window 0x2a00001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 41, synthetic NO, window 0x2a00001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 41, synthetic NO, window 0x0, keys: 93 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (instead of 93, I also get different values) I might have missed something very basic since I'm not very familiar with both openbox/lubuntu and the X input system. Btw.: same goes for three other special buttons on my laptop..

    Read the article

  • Failed 11.10 to 12.04 upgrade and drove me crazy!

    - by Ivan
    Please help me with this! I first tried to upgrade my Ubuntu server from 11.10 to 12.04 thru Upgrade Manager, but never succeeded! Then I tried upgrading thru terminal, which took me ~4 hours as I was warned. When I restarted my computer, my login GUI did not show up at all! (Panic I was!) But when I switched to tty6 and it seemed the upgrade has finished, at least partially and got message Ubuntu 12.04LTS and telling me 12.10 is available. There are bunch of unmet dependencies...."apt-get install -f" may resolve the problem. Then I tried: sudo apt-get -f install, did not succeed! Also I tried sudo apt-get update && sudo apt-get upgrade I got bunch of error message too long to list here. Then I tried: sudo do-release-upgrade still bunch of error message there! There seems a lot trouble with the upgrade from 11.10 to 12.04 for me. Did I miss anything? Anyway, can I ask how I can get the gnome login GUI back? Thanks a lot! Yifang

    Read the article

  • GillSans font doesn't show up in any applications

    - by roboknight
    I am running Ubuntu 10.04, Lucid Lynx, and I'm trying to add some fonts for use with Libre Office. In particular, I've placed a GillSans.ttc font file into /usr/share/fonts/truetype by copying it there with: sudo cp GillSans.ttc /usr/share/fonts/truetype and then attempting to "install" it by updating the font cache: sudo fc-cache -fv That appears to complete successfully, however, the font never seems to be available to either Libre Office, nor fontmatrix. In addition, I tried adding the font to my .fonts directory, thinking that I was somehow seeing a cache of just user supplied fonts, but that isn't the case. The file is a .ttc file, is there some other tools I need to use to extract each font from the .ttc, or is there something else I must do to use a .ttc? Nothing appears to have any issue with the file, but it could be silently failing to do anything. I've looked for the answer in other places, but the only time that a similar question was asked, it did not appear to be answered, so I figured I would ask the question differently and see if anyone else might be able to clue me in on how to use a .ttc font file, if that is possible. A related question, are there any tools to see what font families/font names are contained within a .ttc font file?

    Read the article

  • Configuring an Engenius 3500

    - by dsiddens
    The title speaks to only half of the issue: the other half are the settings in Ubuntu and the sequences therein. The computer in this issue does receive internet with the external antenna jack at the back being fed with a simple magnetic base antenna designed for putting on the roof of an automobile. However, that signal is weak and the Engenius with an external antenna (Rootenna ~15db gain) and ehternet wire will supply a stronger, faster signal. I've set the Engenius to the desired source and entered the correct WEP password. The lights on the Engenius indicate that it's connected to the access point. At the Ubuntu side of this I've worked to no avail changing settings with "Edit Connections" to the point I'm Ask(ing)Ubuntu for help. I have and have RTFM for Engenius 3500 There is an embarrassing side note to this issue: At one time I had the Engenius working! It seems that I can't recall the settings and sequences I used way back when. And I may as well confess to not knowing the Command Line. I'm a GUI guy. Thank you for your time, Doug

    Read the article

  • How do I configure an Intel HD Graphics 4000?

    - by derabbink
    First off, please note that last night I already posted this question to a launchpad mailing list, so this could be considered a cross post. However, I think this is a better place to ask the same question The question: How can I configure my Ubuntu 12.04, with upgraded kernel (3.6), to use the Intel HD Graphics 4000 adapter? (Intel HD 4000 is the standard of 3rd gen Intel Core i7 (Ivy Bridge) graphics adapter) Some output: $ glxinfo name of display: :0 X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 154 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 $ cat /etc/X11/xorg.conf this is probably the farthest from what it should be Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Module" Load "glx" EndSection $ lspci I only listed the line I think are relevant. If you want more info in order to help me, please comment :) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 16:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 16:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Turks HDMI Audio [Radeon HD 6000 Series]

    Read the article

  • How to connect Ethernet via a Huawei Smart AXMT880s modem (with auto-detection)?

    - by user12285
    It's been well over six months but I have the same router SmartAX MT880d with Ethernet, and the exact same problem : no internet, even though I can successfully reach the modem settings page by entering 192.168.1.1 in Firefox. I'm a total beginner with Ubuntu. My internet works great in Windows but does not work in Ubuntu. Sorry if I don't use the right (technical) terminology to explain my issue. English is not my mother tongue. For 2 weeks, I've been doing reading on the web and forums and the ubuntuguide.org to name a few, but to no avail. Now I see no other solution but to ask for help. My problem is that I can't find a way to put the right digits in the right place because I don't know what numbers I need to put in what files. E.g.: do I need to use DHCP? or a static IP address? No clue whatsoever. I'm concerned that I might put figures in the wrong spaces. For example, is the modem/router's IP exactly 192.168.1.1 for Huawei Smart AXMT880d modem? Is the subnet 255.255.255.0? Gateway 192.168.1.1? I'm confused as I can also see a different IP starting with 155131*** (is it an account number?) on my contract with Huawei (a Chinese ISP). Apart from calling 911, what other numbers do I need to put in and where? How do I check that all the numbers have been entered correctly in every appropriate space before trying to connect the Internet?

    Read the article

  • Bug: unable to handle kernel NULL pointer dereference at

    - by maria
    I have recently installed new system on my disc, Ubuntu 12.04. Installation proceeded without problems, I started installing additional software and put data from other discs. I had already two times bug report, it was quite long, and I have no idea how to acces to log file (which probably is somewhere saved) and since I had to switch off the computer using the button, anything else was possible, here is just a small part of it (what I've noted on paper) could not write bytes: Broken pipe speach dicpatcher disabled: edit etc/default/speach-dispatcher saned disabled: edit .... and than: BUG: unable to handle kernel NULL pointer dereference at 0000009c I've run Memory test in GRUB, everything is fine. First time it occured when I was using rsync, second time when I was trying to install texlive. Should I install whole system once again? Or can it be hardware problem? Or something else? If there is any hardware details which may be relevant, please ask, since I have no idea what is happening, I don't know what kind of information could be useful. Thanks P.S. dmesg output:

    Read the article

  • Using Ubuntu isn't worth it for me, Windows works best.

    - by user72475
    Welcome to Ubuntu and the lack of support( 12.04 LOS ). If I say Ubuntu 12.04 is a so so broken OS, I will get flamed. But if I ask for help, I can here the crickets chirruping. Unix/Linux user have an attitude and really don't like to share info. Because if they help everyone, they wouldn't have anyone to call a noob. Then their moms basement wouldn't be the same without being able to flame Ubuntu noobs. I am going back to windows I don't have to spend all day trying to get a single app or option to work. Sure Ubuntu is fun to tinker with but it is not a professional consumer OS. Windows is a better consumer based os, I don't need server software(Unix) that's been broken and hacked to be used like windows(Ubuntu). All the time I have wasted trying to get Ubuntu to work CORRECTLY cost me more the Windows 7 ultimate by far. HOW MUCH IS YOUR TIME WORTH. If you are unemployed and have all night to set in your moms basement and flame noobs then Ubuntu is for you. If you want to use an external monitor on your notebook or download Adobe reader use Windows 7. When are we going to stop complaining about corporate giants like Microsoft and admit they have great products. Gave it a shot, did work for me, I have better things to do with my time. bye Ubuntu

    Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >