Search Results

Search found 11207 results on 449 pages for 'ip ban'.

Page 111/449 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

  • Routing using Linux with 2 NIC cards

    - by Kevin Parker
    Configured Clear OS to be in Gateway mode on a machine with two NIC cards. eth0:192.168.2.0/24 with ip 192.168.2.27 which is connected to a modem and thus have internet connectivity. eth1:192.168.122.0/24 with ip 192.168.122.10 which is connected to other machines in LAN through switch. LAN machines with network 192.168.122.0 is not getting internet.How can they get internet Through Clear OS gateway.I have enabled packet forwarding in clear os using "ip_forward=1" What am i missing?.Can you please help me in this. Following are the static routing i have added: on LAN machine1 with ip address 192.168.122.11 ip route add 192.168.2.0/24 via 192.168.122.10 dev eth0 ip route show 192.168.2.0/24 via 192.168.122.10 dev eth0 192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.11 But still 192.168.2.0/24 network is not reachable.Where can be the problem??

    Read the article

  • Can Ping but Cannot Telnet directly to SQL Server 2012 Cluster Nodes

    - by tresstylez
    We have a monitoring tool (Solarwinds Orion) that needs to connect to a 2-node failover SQL Server Cluster. For reasons outside of our control -- we cannot monitor the CLUSTER IP directly at this time, so we have fallen back to monitoring each cluster node IP directly. This is not working. Upon troubleshooting, we tried to test that the cluster node was listening on the proper (fixed) port by using telnet to the cluster node IP/port -- and the telnet failed. However, telnet'ing to the Cluster IP/Port was SUCCESSFUL! Each node has its own IP. Each node is listening on the identical FIXED port. Each node has Dynamic Ports disabled. Each node can be PINGED successfully from the monitoring tool. Windows Firewall is DISABLED. How can I troubleshoot why I cannot telnet to the listening port on the cluster nodes?

    Read the article

  • DNS Help: Move domain, not mailserver

    - by Preserved
    I'm in the middle of launching a new website for an already-in-use domain. The domain has a complicated email system so we'd like to move that over to the new server a bit later on. Currently the domain DNS is managed by the current webhost. I plan on moving the DNS management back to Network Solutions, then point the A record to the new website's IP. However, currently the DNS has the MX record the same as the A record. When NetworkSolutions is managing the DNS, and I point the A record to the new IP, then the MX record can't be the A record.. Right now: A Record mydomain.com points to IP address 198.198.198.198 MX record mydomain.com points to IP address 198.198.198.198 What I want: A Record mydomain.com points to IP address of new server MX record somehow points to current existing mailserver Does this even make sense?

    Read the article

  • How do I bridge a connection from Wi-Fi to TAP on Mac OS X? (for the emulator QEMU)

    - by penx
    I'm trying to setup a bridge between my Wi-Fi connection and an emulator (QEMU). I need a virtual machine to be on the same LAN as the host, with its own IP address. QEMU requires using a TAP (virtual network device) so I have installed tuntaposx, have it running, and can open up QEMU using a TAP: qemu-system-arm -kernel zImage.integrator -initrd arm_root.img -m 256 -net nic -net tap,ifname=tap1 -nographic -append "console=ttyAMA0" I have a script that configures the bridge once QEMU has opened up the TAP interface: sysctl -w net.link.ether.inet.proxyall=1 sysctl -w net.inet.ip.forwarding=1 sysctl -w net.inet.ip.fw.enable=1 ifconfig bridge0 create ifconfig bridge0 addm en1 ifconfig tap1 0.0.0.0 up ifconfig bridge0 addm tap1 ifconfig bridge0 up If I manually set an IP on the VM, I can ping from the VM to the host, but not from the host to the VM. Also, I can't access the rest of the network from the VM - including not being able to set an IP over DHCP. Any ideas?

    Read the article

  • how to connect virtual box os and local machine

    - by soul
    This question is in connection to this question asked by a user before: http://superuser.com/questions/73470/virtualbox-vdi-file-to-vmware On how to convert vdi to vmdk or vmx using vmware converter. How do I connect the windows xp that is in virtual box to the local computer (windows 7) in a network. Because I got this error while I tried following this instruction: Give the IP address, username and password of the remote machine that you would like to convert and then hit next I got this error in vmware converter: Unable to connect the specified host 10.0.2.15 which is the ip address of the xp machine inside virtual box. It also said that there is a network configuration problem. And when I inputted the ip address from whatismyip.com which should be the same as the ip address on local machine. I didn't get the previous error but I got another one, it said that: insufficient permissions to connect to "ip address" What solution can you suggest for this problem?

    Read the article

  • Setting up a copy of a site with IIS 7?

    - by SJaguar13
    I have a site running on IIS with a dyndns.org domain that points to the IP of the Windows 2008 machine hosting it. I need a copy of that site for development purposes. I set up another folder with all the files, and create a new site in IIS. I don't really have a domain for it, so I was just going to use the IP address. When I go to localhost, 127.0.0.1, or the internal IP, I get bad hostname. If I use the IP address on port 80 (the same as the real version of the site), I get 404 not found. If I use a different port so I don't have them both on the same IP with the same port, I get connection timed out. How do I go about setting this up?

    Read the article

  • Issue updating domain name servers from BlueHost to AWS

    - by cowls
    I am trying to migrate my site hosting from bluehost to AWS cloud based service. I have the site up and running on AWS with an elastic IP configured, it loads fine when I specify the IP address in the browser. I have gone into Route 53 on the AWS console and created a "hosted zone" for the domain. I then created a new record set of type "A" using the IP address as the value. I have a domain name registered with bluehost. Ive logged into the bluehost account and updated the domain name servers to point to those specified in Route 53 in the AWS console. When I hit the IP address directly the site loads, however it doesn't load when using the domain name (I get a google chrome oops error page saying page is not found) I've tried using this site: http://dns.squish.net/ to debug but it seems to be giving me the correct results. fizaclegems.com 300 IN A 107.20.209.78 Where 107.20.209.78 matches the elastic IP configured in the AWS console. This is the result it gives for all 4 name servers. Am I missing a step here? Does anyone know what else I should be doing or looking for?

    Read the article

  • Kloxo - Use third party nameserver

    - by LePhleg
    Here's my case: I got my domain from a registrar. I got my VPS up from a provider who also offers free DNS hosting, on their own server (separately from my VPS, IP:111.111.111.111). So I got these third-party nameservers, lets name them: ns1.provider.com ns2.provider.com and pointed my domain registrar to them. I let it propagate for 24 hours so I believe its ok. (if I ping my domain I get the IP for these nameservers - 111.111.111.111) Afterwards I headed to my providers cPanel (the one they gave me for the DNS hosting service) and changed the default A Record IP from 111.111.111.111 to the IP associated with my VPS (IP:222.222.222.222). The last step, as I see it, is to configure my VPS via Kloxo panel and add the domain. Can someone guide me how can I achieve that? Is it just enough to create a new DNS Template and add as Primary DNS "ns1.provider.com" and Secondary DNS "ns2.provider.com"? Every tutorial I found is using Kloxo to create local nameservers on the same VPS which is something I want to avoid to save resources..

    Read the article

  • Iptables port mapping from two PCs to one

    - by Anton
    We have 3 PCs, two of it are connected to internet (both of it have 2 NIC) PC1: eth0 - 1.0.0.1 (external IP) eth1 - 172.16.0.1 (internal IP) PC2: eth0 - 1.0.0.2 (external IP) eth1 - 172.16.0.2 (internal IP) PC3: eth0 - 172.16.0.3 (internal IP) Now we want to map port 80 from PC1 and PC2 to PC3. But there is the problem: iptables port forwarding works well from PC1 or PC2, but only in case if PC3 have PC1 or PC2 as gateway. So, question is: can we have port mapping from both PC1 and PC2 regardless of gateway settings on PC3? Thank you in advance.

    Read the article

  • How to make this design closer to proper DDD?

    - by Seralize
    I've read about DDD for days now and need help with this sample design. All the rules of DDD make me very confused to how I'm supposed to build anything at all when domain objects are not allowed to show methods to the application layer; where else to orchestrate behaviour? Repositories are not allowed to be injected into entities and entities themselves must thus work on state. Then an entity needs to know something else from the domain, but other entity objects are not allowed to be injected either? Some of these things makes sense to me but some don't. I've yet to find good examples of how to build a whole feature as every example is about Orders and Products, repeating the other examples over and over. I learn best by reading examples and have tried to build a feature using the information I've gained about DDD this far. I need your help to point out what I do wrong and how to fix it, most preferably with code as "I would not recomment doing X and Y" is very hard to understand in a context where everything is just vaguely defined already. If I can't inject an entity into another it would be easier to see how to do it properly. In my example there are users and moderators. A moderator can ban users, but with a business rule: only 3 per day. I did an attempt at setting up a class diagram to show the relationships (code below): interface iUser { public function getUserId(); public function getUsername(); } class User implements iUser { protected $_id; protected $_username; public function __construct(UserId $user_id, Username $username) { $this->_id = $user_id; $this->_username = $username; } public function getUserId() { return $this->_id; } public function getUsername() { return $this->_username; } } class Moderator extends User { protected $_ban_count; protected $_last_ban_date; public function __construct(UserBanCount $ban_count, SimpleDate $last_ban_date) { $this->_ban_count = $ban_count; $this->_last_ban_date = $last_ban_date; } public function banUser(iUser &$user, iBannedUser &$banned_user) { if (! $this->_isAllowedToBan()) { throw new DomainException('You are not allowed to ban more users today.'); } if (date('d.m.Y') != $this->_last_ban_date->getValue()) { $this->_ban_count = 0; } $this->_ban_count++; $date_banned = date('d.m.Y'); $expiration_date = date('d.m.Y', strtotime('+1 week')); $banned_user->add($user->getUserId(), new SimpleDate($date_banned), new SimpleDate($expiration_date)); } protected function _isAllowedToBan() { if ($this->_ban_count >= 3 AND date('d.m.Y') == $this->_last_ban_date->getValue()) { return false; } return true; } } interface iBannedUser { public function add(UserId $user_id, SimpleDate $date_banned, SimpleDate $expiration_date); public function remove(); } class BannedUser implements iBannedUser { protected $_user_id; protected $_date_banned; protected $_expiration_date; public function __construct(UserId $user_id, SimpleDate $date_banned, SimpleDate $expiration_date) { $this->_user_id = $user_id; $this->_date_banned = $date_banned; $this->_expiration_date = $expiration_date; } public function add(UserId $user_id, SimpleDate $date_banned, SimpleDate $expiration_date) { $this->_user_id = $user_id; $this->_date_banned = $date_banned; $this->_expiration_date = $expiration_date; } public function remove() { $this->_user_id = ''; $this->_date_banned = ''; $this->_expiration_date = ''; } } // Gathers objects $user_repo = new UserRepository(); $evil_user = $user_repo->findById(123); $moderator_repo = new ModeratorRepository(); $moderator = $moderator_repo->findById(1337); $banned_user_factory = new BannedUserFactory(); $banned_user = $banned_user_factory->build(); // Performs ban $moderator->banUser($evil_user, $banned_user); // Saves objects to database $user_repo->store($evil_user); $moderator_repo->store($moderator); $banned_user_repo = new BannedUserRepository(); $banned_user_repo->store($banned_user); Should the User entitity have a 'is_banned' field which can be checked with $user->isBanned();? How to remove a ban? I have no idea.

    Read the article

  • Configure SQL Express 2005 for remote access

    Please follow the below steps as shown in pictures to configure SQL Server Express 2005 for remote access. Fig1: Open SQL Serve Configuration Manager Fig2: Navigate to SQL Serve 2005 N/W configuration and click on Protocols node Fig3: Enable TCP/IP Protocol Fig4: Enable Named Pipes Protocol Fig5: After enabling TCP/IP and Named Pipes protocols Fig6: Finally click on TCP/IP to configure the port number to listen N/W requests to SQL Express 2005. span.fullpost {display:none;}

    Read the article

  • iptables change destination address base on result from mysql

    - by user1812225
    I need to change destination address of tcp/ip packets based on result of execution mysql query... SELECT `score` FROM `reputation` WHERE `ip` = packet.source_ip if (score < a) then packet.destination_ip = ... else packet.destination_ip = ... What ways of solving this problem do you see? Thanks. P.S. this is important that destination host knows REAL ip address where packet came from, not IP address of firewall.

    Read the article

  • Apache reverse proxy setup

    - by nixnotwin
    I have a jboss application server on machine1. The application address is http://ip-address:8080/webapp. I wanted to have only an ip pointing to the application. So on machine2 I setup an apache proxy. But it only helps to shift to port 80 but the directory webapp cannot be removed. So using proxy, the address is http://ip-address/webapp. So is there a way to just have the ip point to the application. For example the address http://ip-address should open the web page of the application.

    Read the article

  • MAC filtering after DHCP

    - by user1655161
    How to manage filtering by MAC in Ubuntu? Scenario: Ubuntu DHCP is configured and working (network 192.168.1.0) a) Laptop 1 is set in configuration on Ubuntu as static IP Laptop 1 is configured for automatic IP and when is connected to server everything works. I'm taking laptop 2 which is configured as static IP 192.168.1.10 and his configuration is not set in Ubuntu dhcpd.conf After laptop 2 is connected internet working. It is possible to do MAC filtering which disallow to connect PCs with address IP set as static but MAC address is not configured in Ubuntu (something like: intruder in network)?

    Read the article

  • local wordpress installation not accessible from the outside world

    - by hello
    I have a working installation of wordpress located in /var/www/html/wordpress It is accessible in my local network at [local-machine-ip]/wordpress/ There is also a test page located in /var/www/html/test.html It is also accessible in my local network at [local-machine-ip] I would like the wordpress website to be accessible from the outside world. I know that my ISP blocks incoming requests on port 80, so I set my router to redirect requests from port 8080 to 80. This feature appears to be working correctly since I can access the test.html page using my public ip address as follows: [public-ip]:8080 However, I cannot access [public-ip]:8080/wordpress Here is my Apache config : <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/html ServerName [my.domain.com] <Directory /var/www/html/> Options FollowSymLinks Indexes MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Thanks!

    Read the article

  • network problem

    - by TimbooXD
    I was trying to make my IP static from my ubuntu 12.10 laptop but I made a mistake and after restarting with sudo /etc/init.d/networking restart Ubuntu crashed. So after restart my system it said that it couldn't use the network. Now I need to reconnect to the Internet and make my ip static. It is for a server and that isn't the problem, but how can I reconnect and make my ip static and which data I need to know?

    Read the article

  • Single ipv6 from /64 subnet

    - by PartyPete
    I have a newb question I'd like to ask. We have an dedicated server and we got an ipv6 /64 block. We want to use squid to make proxy and use those IP. And my question now is: Is it possible to use only one IP out of range? for example: let's say I have a range of IPs ffff:ffff::/64, and want to use only one address from it: ffff:ffff::1/128 or ffff:ffff::2/128 but whenever I set squid like this I always get from 'what is my ip' services whole subnet which is again ffff:ffff::. What I want to achieve is to get from those 'what is my ip' services to send me back IP ffff:ffff::1 (or 2 for that matter) Am I doing something wrong?

    Read the article

  • ????????Solaris: ???????????????

    - by Yusuke.Yamamoto
    ????? ??:2010/11/25 ??:?????? ??????? Solaris ?????????????????????????NIC?TCP/IP??????????????????????????????????????????????????????????????????????????????????? Solaris ???????????????????????? ???????????????????????????????????????????????????????????????????????????????????????????????????????CPU???????????????????????????????????????????????????????????????????????IP??????????IP???????????????????????????????TCP????????TCP???????????????????????????????????????????????????????????????????????????????????????? ????????? ????????????????? http://www.oracle.com/technology/global/jp/ondemand/otn-seminar/pdf/Homma_Network_201011.pdf

    Read the article

  • "Simple" sort a nested array using array_multisort or native PHP functions instead of my own foreach loop

    - by Ana Ban
    I have the following array of days of the week, with each day having hours of the day (the whole array represents the schedule of a part-time employee): Array ( [7] => Array ( [0] => 15 [1] => 14 [2] => 13 [3] => 11 [4] => 12 [5] => 10 ) [1] => Array ( [0] => 10 [1] => 13 [2] => 12 ) [6] => Array ( [0] => 14 ) [3] => Array ( [0] => 4 [1] => 5 [2] => 6 ) ) and I simply need to: sort asc each sub-array (2nd dimension) - no need to maintain the numeric keys, values are integers sort asc the 1st dimension and maintain the numeric, integer keys ie: Array ( [1] => Array ( [0] => 10 [1] => 12 [2] => 13 ) [3] => Array ( [0] => 4 [1] => 5 [2] => 6 ) [6] => Array ( [0] => 14 ) [7] => Array ( [0] => 10 [1] => 11 [2] => 12 [3] => 13 [4] => 14 [5] => 15 ) ) Additional info: only the keys of the 1st dimension and the values of the 2nd dimension (and of course their association) are meaningful to my use-case the 1st dimension can have at most 7 values, ranging from 1-7 (days of the week), and will have at least 1 value (1 day) the 2nd dimension can have at most 24 values, ranging from 0-23 (hours of each day), and will have at least 1 value (1 hour per day) I know I can do this with a foreach on the whole ksorted array and sort each 2nd dimension array: ksort($sched); foreach ($sched as &$array) sort($array); unset($array); but I was hoping I could achieve this with native php array function(s) instead. My search led me to try array_multisort(array_values($array), array_keys($array), $array) but I just can't make it work.

    Read the article

  • app.config files of referenced dlls

    - by ban-dana
    I have a Web Project (VS 2008) that references a bunch of DLLs. The DLLs are built separately, so the project references binaries and not DLL projects. Some of the DLLs have their own app.config, which I want to be copied autmatically to the web project's output directory. Is there any suitable generic way to achieve this?

    Read the article

  • Why I'm not getting "Multiple definition" error from the g++?

    - by ban
    I tried to link my executable program with 2 static libraries using g++. The 2 static libraries have the same function name. I'm expecting a "multiple definition" linking error from the linker, but I did not received. Can anyone help to explain why is this so? staticLibA.h #ifndef _STATIC_LIBA_HEADER #define _STATIC_LIBA_HEADER int hello(void); #endif staticLibA.cpp #include "staticLibA.h" int hello(void) { printf("\nI'm in staticLibA\n"); return 0; } output: g++ -c -Wall -fPIC -m32 -o staticLibA.o staticLibA.cpp ar -cvq ../libstaticLibA.a staticLibA.o a - staticLibA.o staticLibB.h #ifndef _STATIC_LIBB_HEADER #define _STATIC_LIBB_HEADER int hello(void); #endif staticLibB.cpp #include "staticLibB.h" int hello(void) { printf("\nI'm in staticLibB\n"); return 0; } output: g++ -c -Wall -fPIC -m32 -o staticLibB.o staticLibB.cpp ar -cvq ../libstaticLibB.a staticLibB.o a - staticLibB.o main.cpp extern int hello(void); int main(void) { hello(); return 0; } output: g++ -c -o main.o main.cpp g++ -o multipleLibsTest main.o -L. -lstaticLibA -lstaticLibB -lstaticLibC -ldl -lpthread -lrt

    Read the article

  • Why is Routes.rb not loading the IPs from cache?

    - by Christian Fazzini
    I am testing this in local. My ip is 127.0.0.1. The ip_permissions table, is empty. When I browse the site, everything works as expected. Now, I want to simulate browsing the site with a banned IP. So I add the IP into the ip_permissions table via: IpPermission.create!(:ip => '127.0.0.1', :note => 'foobar', :category => 'blacklist') In Rails console, I clear the cache via; Rails.cache.clear. I browse the site. I don't get sent to pages#blacklist. If I restart the server. And browse the site, then I get sent to pages#blacklist. Why do I need to restart the server every time the ip_permissions table is updated? Shouldn't it fetch it based on cache? Routes look like: class BlacklistConstraint def initialize @blacklist = IpPermission.blacklist end def matches?(request) @blacklist.map { |b| b.ip }.include? request.remote_ip end end Foobar::Application.routes.draw do match '/(*path)' => 'pages#blacklist', :constraints => BlacklistConstraint.new .... end My model looks like: class IpPermission < ActiveRecord::Base validates_presence_of :ip, :note, :category validates_uniqueness_of :ip, :scope => [:category] validates :category, :inclusion => { :in => ['whitelist', 'blacklist'] } def self.whitelist Rails.cache.fetch('whitelist', :expires_in => 1.month) { self.where(:category => 'whitelist').all } end def self.blacklist Rails.cache.fetch('blacklist', :expires_in => 1.month) { self.where(:category => 'blacklist').all } end end

    Read the article

  • Timer_EntityBody, Timer_ConnectionIdle and Connection Closed Unexpectly

    - by ihsany
    We have a windows application, it connects to a web service (XML web service hosted on a Windows 2008 Server IIS 7.5, no antivirus) and fetches some data to the client. But sometimes (around 5%-10% of the requests), it gives an error when trying to connect web service. Here is the client application error log; Exception:System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly. at System.Web.Services.Protocols.WebClientAsyncResult.WaitForResponse() at System.Web.Services.Protocols.WebClientProtocol.EndSend(IAsyncResult asyncResult, Object& internalAsyncState, Stream& responseStream) at System.Web.Services.Protocols.SoapHttpClientProtocol.EndInvoke(IAsyncResult asyncResult) at APPClient.APPFPService.WEBService.EndAddMoney(IAsyncResult asyncResult) at APPClient.BLL.ServiceAgent.AddMoneyCallback(IAsyncResult ar) From other hand, on the web server, i checked HTTP error logs and i see a long file like this; 2014-06-05 14:02:04 65.82.178.73 53798 SERVER.IP.ADDRESS 80 - - - - - Timer_ConnectionIdle - 2014-06-05 14:07:24 76.109.81.223 58985 SERVER.IP.ADDRESS 80 - - - - - Timer_ConnectionIdle - 2014-06-05 14:07:39 76.109.81.223 2803 SERVER.IP.ADDRESS 80 - - - - - Timer_ConnectionIdle - 2014-06-05 14:08:59 76.109.81.223 52656 SERVER.IP.ADDRESS 80 - - - - - Timer_ConnectionIdle - 2014-06-05 14:09:05 65.82.178.73 53904 SERVER.IP.ADDRESS 80 HTTP/1.1 POST /webservice/webservice.asmx - 2 Timer_EntityBody SYPService 2014-06-05 14:10:55 50.186.180.191 50648 SERVER.IP.ADDRESS 80 - - - - - Timer_ConnectionIdle - Here is a similar situation but it did not help me. UPDATE: When i checked the IIS logs, i see some issues like these; cs-method cs-uri-stem sc-status sc-win32-status time-taken cs-version POST /webservice/webservice.asmx 400 64 46 HTTP/1.1 POST /webservice/webservice.asmx 400 64 134675 HTTP/1.1 POST /webservice/webservice.asmx 400 64 37549 HTTP/1.1 POST /webservice/webservice.asmx 400 64 109 HTTP/1.1 POST /webservice/webservice.asmx 400 64 31 HTTP/1.1 POST /webservice/webservice.asmx 400 64 0 HTTP/1.1 POST /webservice/webservice.asmx 400 64 15 HTTP/1.1 sc-win32-status 64 : The specified network name is no longer available. sc-status 400 : Bad request Also some requests takes around 130 seconds, but some of less than 1 second. This is a windows application which connects to a web service for process some data. There is not a query takes around 130 seconds on the database.

    Read the article

  • mount.nfs: access denied by server while mounting (null), can't find any log information

    - by Mark0978
    Two ubuntu servers: 10.0.8.2 is the client, 192.168.20.58 is the server. Between the 2 machines, Ping works, ssh works (in both directions). From 10.0.8.2 showmount -e 192.168.20.58 Export list for 192.168.20.58: /imr/nfsshares/foobar 10.0.8.2 mount.nfs 192.168.20.58:/imr/nfsshares/foobar /var/data/foobar -v mount.nfs: access denied by server while mounting (null) Found several things online, tried them all and still can't find any log information anywhere. On the server: [email protected]:/var/log# cat /etc/hosts.allow sendmail: all ALL: 10.0.8.2 /etc/hosts.deny is all comments How can I get a trail of log statements to figure this out? What does it take to get some logging so I have some idea of WHY it won't mount? On the server: [email protected]# nmap -sR RPC 192.168.20.58 Starting Nmap 5.21 ( http://nmap.org ) at 2012-07-04 21:16 CDT Failed to resolve given hostname/IP: RPC. Note that you can't use '/mask' AND '1-4,7,100-' style IP ranges Nmap scan report for 192.168.20.58 Host is up (0.0000060s latency). Not shown: 988 closed ports PORT STATE SERVICE VERSION 22/tcp open unknown 80/tcp open unknown 111/tcp open unknown 139/tcp open unknown 445/tcp open unknown 902/tcp open unknown 2049/tcp open unknown 3000/tcp open unknown 5666/tcp open unknown 8009/tcp open unknown 8222/tcp open unknown 8333/tcp open unknown Nmap done: 1 IP address (1 host up) scanned in 3.81 seconds From the client: [email protected]:~$ nmap -sR RPC 192.168.20.58 Starting Nmap 5.21 ( http://nmap.org ) at 2012-07-04 22:14 EDT Failed to resolve given hostname/IP: RPC. Note that you can't use '/mask' AND '1-4,7,100-' style IP ranges Nmap scan report for 192.168.20.58 Host is up (0.73s latency). Not shown: 988 closed ports PORT STATE SERVICE VERSION 22/tcp open unknown 80/tcp open unknown 111/tcp open rpcbind (rpcbind V2) 2 (rpc #100000) 139/tcp open unknown 445/tcp open unknown 902/tcp open unknown 2049/tcp open nfs (nfs V2-4) 2-4 (rpc #100003) 3000/tcp open unknown 5666/tcp open unknown 8009/tcp open unknown 8222/tcp open unknown 8333/tcp open unknown Nmap done: 1 IP address (1 host up) scanned in 191.56 seconds

    Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >