process innovation - Page 111

IIS 7 AppPool logs an error after recycle due to inactivity

- by ddysart

We have Windows 2008 RS Server running IIS hosting an ASP.NET site. This morning there was a weird sequence. First a notice that the AppPool was being recycled due to inactivity: "A worker process with process id of '6896' serving application pool 'xxxx' was shutdown due to inactivity. Application Pool timeout configuration was set to 20 minutes. A new worker process will be started when needed." This makes sense and jibes with out timeout settings, but 30 seconds later we see: "A process serving application pool 'xxxx' terminated unexpectedly. The process id was '6896'. The process exit code was '0xc0000005'." I found an older KB article that explains a condition where this might happend on IIS6 due to permission issues, but am curious what might cause this on IIS7.5, especially since we are not seeing it regularly.

Read the article

The effects of Agile Programming can alter the five desirable properties of modeling tools and techniques

The effects of Agile Programming can alter the five desirable properties of modeling tools and techniques as documented by Pfleeger. The agile methodology does promote human understanding and communication through the use of short iterative software development life cycles which forces stakeholders to review the project and adjust the project for any requirement changes. Due to the consistent evaluations of a project and requirements, process are continually being refined, upgraded, and compared against other alternatives to ensure the best design delivered to the client. Due to the short repetitive development cycles, increased time is devoted to process management due to the fact that requirements and designs could be constantly changing. This requires additional forecasting, monitoring, and planning for each iteration. Because things can change so rapidly, automated guidance in performing process must be updated for each iteration because the environment and the available reusable process could change. In addition, the original guidance and suggestions for the project also need to be updated to account for these changes as well. In essence the automation of process execution is supported by the agile methodology because during every iteration all processes must be tested, evaluated to ensure process integrity and compliance with the customer’s requirements. I do not think the agile approach diminishes modeling, in fact I think it increases the modeling because before the start of every development cycle, modeling must be checked for accuracy based on the changed requirements. So in essence the reduced time spent initially designing the models is in fact gained as the project completes every iteration of the project.

Read the article

Parallelize incremental processing in Tabular #ssas #tabular

- by Marco Russo (SQLBI)

I recently came in a problem trying to improve the parallelism of Tabular processing. As you know, multiple tables can be processed in parallel, whereas the processing of several partitions within the same table cannot be parallelized. When you perform an incremental update by adding only new rows to existing table, what you really do is adding rows to a partition, so adding rows to many tables means adding rows to several partitions. The particular condition you have in this case is that every partition in which you add rows belongs to a different table. Adding rows implies using the ProcessAdd command; its QueryBinding parameter specifies a SQL syntax to read new rows, otherwise the original query specified for the partition will be used, and it could generate duplicated data if you don’t have a dynamic behavior on the SQL side. If you create the required XMLA code manually, you will find that the QueryBinding node that should be part of the ProcessAdd command has to be moved out from ProcessAdd in case you are using a Batch command with more than one Process command (which is the reason why you want to use a single batch: run multiple process operations in parallel!). If you use AMO (Analysis Management Objects) you will find that this combination is not supported, even if you don’t have a syntax error compiling the code, but you might obtain this error at execution time: The syntax for the 'Process' command is incorrect. The 'Bindings' keyword cannot appear under a 'Process' command if the 'Process' command is a part of a 'Batch' command and there are more than one 'Process' commands in the 'Batch' or the 'Batch' command contains any out of line related information. In this case, the 'Bindings' keyword should be a part of the 'Batch' command only. If this is happening to you, the best solution I’ve found is manipulating the XMLA code generated by AMO moving the Binding nodes in the right place. A more detailed description of the issue and the code required to send a correct XMLA batch to Analysis Services is available in my article Parallelize ProcessAdd with AMO. By the way, the same technique (and code) can be used also if you have the same problem in a Multidimensional model.

Read the article

Modelling work-flow plus interaction with a database - quick and accessible options

- by cjmUK

I'm wanting to model a (proposed) manufacturing line, with specific emphasis on interaction with a traceability database. That is, various process engineers have already mapped the manufacturing process - I'm only interested in the various stations along the line that have to talk to the DB. The intended audience is a mixture of project managers, engineers and IT people - the purpose is to identify: points at which the line interacts with the DB (perhaps going so far as indicating the Store Procs called at each point, perhaps even which parameters are passed.) the communication source (PC/Handheld device/PLC) the communication medium (wireless/fibre/copper) control flow (if leak test fails, unit is diverted to repair station) Basically, the model will be used as a focus different groups on outstanding tasks; for example, I'm interested in the DB and any front-end app needed, process engineers need to be thinking about the workflow and liaising with the PLC suppliers, the other IT guys need to make sure we have the hardware and comms in place. Obviously I could just improvise in Visio, but I was wondering if there was a particular modelling technique that might particularly suit my needs or my audience. I'm thinking of a visual model with supporting documentation (as little as possible, as much as is necessary). Clearly, I don't want something that will take me ages to (effectively) learn, nor one that will alienate non-technical members of the project team. So far I've had brief looks at BPMN, EPC Diagrams, standard Flow Diagrams... and I've forgotten most of what I used to know about UML... And I'm not against picking and mixing... as long as it is quick, clear and effective. Conclusion: In the end, I opted for a quasi-workflow/dataflow diagram. I mapped out the parts of the manufacturing process that interact with the traceability DB, and indicated in a significantly-simplified form, the data flows and DB activity. Alongside which, I have a supporting document which outlines each process, the data being transacted for each process (a 'data dictionary' of sorts) and details of hardware and connectivity required. I can't decide whether is a product of genius or a crime against established software development practices, but I do think that is will hit the mark for this particular audience.

Read the article

php-cgi got SIGKILL on burst.net VPS?

- by Shawn

I got an VPS at burst.net, very cheap one, but this doesn't matter. The strange behavior of it is, the php-cgi process, which started using lighthttpd's spawn-cgi, dies every a few minutes. however, other processes are fine and great, even include a java process, and I'm sure there is no "out of memory" issue, so it's not killed by OOM killer. I used strace to trace the process, and found out it was killed by SIGKILL, hence no single log was left on the disk, just dies suddenly. Is there anyway I can find out what process/thing sent the SIGKILL to the poor php process? Filed a ticket with the vendor, but they said they won't care. strace -p 7176 Process 7176 attached - interrupt to quit wait4(-1, <unfinished ...> +++ killed by SIGKILL +++

Read the article

Dijkstra's Bankers Algorithm

- by idea_

Could somebody please provide a step-through approach to solving the following problem using the Banker's Algorithm? How do I determine whether a "safe-state" exists? What is meant when a process can "run to completion"? In this example, I have four processes and 10 instances of the same resource. Resources Allocated | Resources Needed Process A 1 6 Process B 1 5 Process C 2 4 Process D 4 7

Read the article

EJB3 Transaction Propogation

- by Matt S.

I have a stateless bean something like: @Stateless public class MyStatelessBean implements MyStatelessLocal, MyStatelessRemote { @PersistenceContext(unitName="myPC") private EntityManager mgr; @TransationAttribute(TransactionAttributeType.SUPPORTED) public void processObjects(List<Object> objs) { // this method just processes the data; no need for a transaction for(Object obj : objs) { this.process(obj); } } @TransationAttribute(TransactionAttributeType.REQUIRES_NEW) public void process(Object obj) { // do some work with obj that must be in the scope of a transaction this.mgr.merge(obj); // ... this.mgr.merge(obj); // ... this.mgr.flush(); } } The typically usage then is the client would call processObjects(...), which doesn't actually interact with the entity manager. It does what it needs to do and calls process(...) individually for each object to process. The duration of process(...) is relatively short, but processObjects(...) could take a very long time to run through everything. Therefore I don't want it to maintain an open transaction. I do need the individual process(...) operations to operate within their own transaction. This should be a new transaction for every call. Lastly I'd like to keep the option open for the client to call process(...) directly. I've tried a number of different transaction types: never, not supported, supported (on processObjects) and required, requires new (on process) but I get TransactionRequiredException every time merge() is called. I've been able to make it work by splitting up the methods into two different beans: @Stateless @TransationAttribute(TransactionAttributeType.NOT_SUPPORTED) public class MyStatelessBean1 implements MyStatelessLocal1, MyStatelessRemote1 { @EJB private MyStatelessBean2 myBean2; public void processObjects(List<Object> objs) { // this method just processes the data; no need for a transaction for(Object obj : objs) { this.myBean2.process(obj); } } } @Stateless public class MyStatelessBean2 implements MyStatelessLocal2, MyStatelessRemote2 { @PersistenceContext(unitName="myPC") private EntityManager mgr; @TransationAttribute(TransactionAttributeType.REQUIRES_NEW) public void process(Object obj) { // do some work with obj that must be in the scope of a transaction this.mgr.merge(obj); // ... this.mgr.merge(obj); // ... this.mgr.flush(); } } but I'm still curious if it's possible to accomplish this in one class. It looks to me like the transaction manager only operates at the bean level, even when individual methods are given more specific annotations. So if I mark one method in a way to prevent the transaction from starting calling other methods within that same instance will also not create a transaction, no matter how they're marked? I'm using JBoss Application Server 4.2.1.GA, but non-specific answers are welcome / preferred.

Read the article

crash with CoUnintailize() api of COM

- by jbp117

My main process(main.exe) initilaized COM library and created a thread which creates a new process(p1.exe) this new process is again initializing COM library and after making all references as zero unintialized COM here.. the unintailezed COM in the main process (i.e main.exe) also.... When i run p1.exe individually it is successful.. but it is crashing when i create a process for p1.exe from main.exe

Read the article

crash with CoUnintialize() api of COM

- by jbp117

My main process(main.exe) initilaized COM library and created a thread which creates a new process(p1.exe) this new process is again initializing COM library and after making all references as zero unintialized COM here.. the unintailezed COM in the main process (i.e main.exe) also.... When i run p1.exe individually it is successful.. but it is crashing when i create a process for p1.exe from main.exe

Read the article

python multiprocessing member variable not set

- by Jake

In the following script, I get the "stop message received" output but the process never ends. Why is that? Is there another way to end a process besides terminate or os.kill that is along these lines? from multiprocessing import Process from time import sleep class Test(Process): def __init__(self): Process.__init__(self) self.stop = False def run(self): while self.stop == False: print "running" sleep(1.0) def end(self): print "stop message received" self.stop = True if __name__ == "__main__": test = Test() test.start() sleep(1.0) test.end() test.join()

Read the article

timing control for parallel processes

- by omrihsan

how can i control two processes to run alternately in separate terminal windows. for example i run the code for each on separate terminal windows at 11:59 and both of them wait for the time to be 12:00. at this moment process one starts execution and process two waits for say 10 seconds. then they switch, process two executes and process one waits. in this way they take turns until the process is complete.

Read the article

Know more about Cache Buffer Handle

- by Liu Maclean(???)

??????«latch free:cache buffer handles???SQL????»?????cache buffer handle latch?????,?????????: “?????pin?buffer header???????buffer handle,??buffer handle?????????cache buffer handles?,??????cache buffer handles??????,???????cache???buffer handles,?????(reserved set)?????????????_db_handles_cached(???5)???,?????????????????SQL??????????????????????,????pin??????,????????handle,?????????5?cached buffer handles???handle????????????????,Oracle?????????????????pin?”????“?buffer,????????????????handle???db_block_buffers/processes,????_cursor_db_buffers_pinned???????cache buffer handles?????,??????,????????????SQL,????cache?buffer handles?????????,??????????????,???????????/?????” ????T.ASKMACLEAN.COM????,??????cache Buffer handle?????: cache buffer handle ??: ------------------------------ | Buffer state object | ------------------------------ | Place to hang the buffer | ------------------------------ | Consistent Get? | ------------------------------ | Proc Owning SO | ------------------------------ | Flags(RIR) | ------------------------------ ???? cache buffer handle SO: 70000046fdfe530, type: 24, owner: 70000041b018630, flag: INIT/-/-/0×00(buffer) (CR) PR: 70000048e92d148 FLG: 0×500000lock rls: 0, class bit: 0kcbbfbp: [BH: 7000001c7f069b0, LINK: 70000046fdfe570]where: kdswh02: kdsgrp, why: 0BH (7000001c7f069b0) file#: 12 rdba: 0×03061612 (12/398866) class: 1 ba: 7000001c70ee000set: 75 blksize: 8192 bsi: 0 set-flg: 0 pwbcnt: 0dbwrid: 2 obj: 66209 objn: 48710 tsn: 6 afn: 12hash: [700000485f12138,700000485f12138] lru: [70000025af67790,700000132f69ee0]lru-flags: hot_bufferckptq: [NULL] fileq: [NULL] objq: [700000114f5dd10,70000028bf5d620]use: [70000046fdfe570,70000046fdfe570] wait: [NULL]st: SCURRENT md: SHR tch: 0flags: affinity_lockLRBA: [0x0.0.0] HSCN: [0xffff.ffffffff] HSUB: [65535]where: kdswh02: kdsgrp, why: 0 # Example:# (buffer) (CR) PR: 37290 FLG: 0# kcbbfbp : [BH: befd8, LINK: 7836c] (WAITING) Buffer handle (X$KCBBF) kernel cache, buffer buffer_handles Query x$kcbbf – lists all the buffer handles ???? _db_handles System-wide simultaneous buffer operations ,no of buffer handles_db_handles_cached Buffer handles cached each process , no of processes default 5_cursor_db_buffers_pinned additional number of buffers a cursor can pin at once_session_kept_cursor_pins Number of cursors pins to keep in a session When a buffer is pinned it is attached to buffer state object. ??? ???????? cache buffer handles latch ? buffer pin???: SESSION A : SQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE 10.2.0.5.0 Production TNS for Linux: Version 10.2.0.5.0 - Production NLSRTL Version 10.2.0.5.0 - Production SQL> create table test_cbc_handle(t1 int); Table created. SQL> insert into test_cbc_handle values(1); 1 row created. SQL> commit; Commit complete. SQL> select rowid from test_cbc_handle; ROWID ------------------ AAANO6AABAAAQZSAAA SQL> select * from test_cbc_handle where rowid='AAANO6AABAAAQZSAAA'; T1 ---------- 1 SQL> select addr,name from v$latch_parent where name='cache buffer handles'; ADDR NAME ---------------- -------------------------------------------------- 00000000600140A8 cache buffer handles SQL> select to_number('00000000600140A8','xxxxxxxxxxxxxxxxxxxx') from dual; TO_NUMBER('00000000600140A8','XXXXXXXXXXXXXXXXXXXX') ---------------------------------------------------- 1610694824 ??cache buffer handles????parent latch ??? child latch ???SESSION A hold ??????cache buffer handles parent latch ???? oradebug call kslgetl ??, kslgetl?oracle??get latch??? SQL> oradebug setmypid; Statement processed. SQL> oradebug call kslgetl 1610694824 1; Function returned 1 ?????SESSION B ???: SQL> select * from v$latchholder; PID SID LADDR NAME GETS ---------- ---------- ---------------- ---------------------------------------------------------------- ---------- 15 141 00000000600140A8 cache buffer handles 119 cache buffer handles latch ???session A hold??,????????acquire cache buffer handle latch SQL> select * from test_cbc_handle where rowid='AAANO6AABAAAQZSAAA'; T1 ---------- 1 ?????Server Process?????? read buffer, ????????"_db_handles_cached", ??process?cache 5? cache buffer handle ??"_db_handles_cached"=0,?process????5????cache buffer handle , ???? process ???pin buffer,???hold cache buffer handle latch??????cache buffer handle SQL> alter system set "_db_handles_cached"=0 scope=spfile; System altered. ????? shutdown immediate; startup; session A: SQL> oradebug setmypid; Statement processed. SQL> oradebug call kslgetl 1610694824 1; Function returned 1 session B: select * from test_cbc_handle where rowid='AAANO6AABAAAQZSAAA'; session B hang!! WHY? SQL> oradebug setmypid; Statement processed. SQL> oradebug dump systemstate 266; Statement processed. SO: 0x11b30b7b0, type: 2, owner: (nil), flag: INIT/-/-/0x00 (process) Oracle pid=22, calls cur/top: (nil)/0x11b453c38, flag: (0) - int error: 0, call error: 0, sess error: 0, txn error 0 (post info) last post received: 0 0 0 last post received-location: No post last process to post me: none last post sent: 0 0 0 last post sent-location: No post last process posted by me: none (latch info) wait_event=0 bits=8 holding (efd=4) 600140a8 cache buffer handles level=3 SO: 0x11b305810, type: 2, owner: (nil), flag: INIT/-/-/0x00 (process) Oracle pid=10, calls cur/top: 0x11b455ac0/0x11b450a58, flag: (0) - int error: 0, call error: 0, sess error: 0, txn error 0 (post info) last post received: 0 0 0 last post received-location: No post last process to post me: none last post sent: 0 0 0 last post sent-location: No post last process posted by me: none (latch info) wait_event=0 bits=2 Location from where call was made: kcbzgs: waiting for 600140a8 cache buffer handles level=3 FBD93353:000019F0 10 162 10005 1 KSL WAIT BEG [latch: cache buffer handles] 1610694824/0x600140a8 125/0x7d 0/0x0 FF936584:00002761 10 144 10005 1 KSL WAIT BEG [latch: cache buffer handles] 1610694824/0x600140a8 125/0x7d 0/0x0 PID=22 holding ??cache buffer handles latch PID=10 ?? cache buffer handles latch, ????"_db_handles_cached"=0 ?? process??????cache buffer handles ??systemstate???? kcbbfbp cache buffer handle??, ?? "_db_handles_cached"=0 ? cache buffer handles latch?hold ?? ????cache buffer handles latch , ??? buffer?pin?????????? session A exit session B: SQL> select * from v$latchholder; no rows selected SQL> insert into test_cbc_handle values(2); 1 row created. SQL> commit; Commit complete. SQL> SQL> select t1,rowid from test_cbc_handle; T1 ROWID ---------- ------------------ 1 AAANPAAABAAAQZSAAA 2 AAANPAAABAAAQZSAAB SQL> select spid,pid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)); SPID PID ------------ ---------- 19251 10 ? GDB ? SPID=19215 ?debug , ?? kcbrls ????breakpoint ??? ????release buffer [oracle@vrh8 ~]$ gdb $ORACLE_HOME/bin/oracle 19251 GNU gdb (GDB) Red Hat Enterprise Linux (7.0.1-37.el5) Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /s01/oracle/product/10.2.0.5/db_1/bin/oracle...(no debugging symbols found)...done. Attaching to program: /s01/oracle/product/10.2.0.5/db_1/bin/oracle, process 19251 Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libskgxp10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libskgxp10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libhasgen10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libhasgen10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libskgxn2.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libskgxn2.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libocr10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libocr10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libocrb10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libocrb10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libocrutl10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libocrutl10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libjox10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libjox10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libclsra10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libclsra10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libdbcfg10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libdbcfg10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libnnz10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libnnz10.so Reading symbols from /usr/lib64/libaio.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib64/libaio.so.1 Reading symbols from /lib64/libdl.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/libdl.so.2 Reading symbols from /lib64/libm.so.6...(no debugging symbols found)...done. Loaded symbols for /lib64/libm.so.6 Reading symbols from /lib64/libpthread.so.0...(no debugging symbols found)...done. [Thread debugging using libthread_db enabled] Loaded symbols for /lib64/libpthread.so.0 Reading symbols from /lib64/libnsl.so.1...(no debugging symbols found)...done. Loaded symbols for /lib64/libnsl.so.1 Reading symbols from /lib64/libc.so.6...(no debugging symbols found)...done. Loaded symbols for /lib64/libc.so.6 Reading symbols from /lib64/ld-linux-x86-64.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/ld-linux-x86-64.so.2 Reading symbols from /lib64/libnss_files.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/libnss_files.so.2 0x00000035c000d940 in __read_nocancel () from /lib64/libpthread.so.0 (gdb) break kcbrls Breakpoint 1 at 0x10e5d24 session B: select * from test_cbc_handle where rowid='AAANPAAABAAAQZSAAA'; select hang !! GDB (gdb) c Continuing. Breakpoint 1, 0x00000000010e5d24 in kcbrls () (gdb) bt #0 0x00000000010e5d24 in kcbrls () #1 0x0000000002e87d25 in qertbFetchByUserRowID () #2 0x00000000030c62b8 in opifch2 () #3 0x00000000032327f0 in kpoal8 () #4 0x00000000013b7c10 in opiodr () #5 0x0000000003c3c9da in ttcpip () #6 0x00000000013b3144 in opitsk () #7 0x00000000013b60ec in opiino () #8 0x00000000013b7c10 in opiodr () #9 0x00000000013a92f8 in opidrv () #10 0x0000000001fa3936 in sou2o () #11 0x000000000072d40b in opimai_real () #12 0x000000000072d35c in main () SQL> oradebug setmypid; Statement processed. SQL> oradebug dump systemstate 266; Statement processed. ?????? kcbbfbp buffer cache handle ? SO state object ? BH BUFFER HEADER link??? ---------------------------------------- SO: 0x11b452348, type: 3, owner: 0x11b305810, flag: INIT/-/-/0x00 (call) sess: cur 11b41bd18, rec 0, usr 11b41bd18; depth: 0 ---------------------------------------- SO: 0x1182dc750, type: 24, owner: 0x11b452348, flag: INIT/-/-/0x00 (buffer) (CR) PR: 0x11b305810 FLG: 0x108000 class bit: (nil) kcbbfbp: [BH: 0xf2fc69f8, LINK: 0x1182dc790] where: kdswh05: kdsgrp, why: 0 BH (0xf2fc69f8) file#: 1 rdba: 0x00410652 (1/67154) class: 1 ba: 0xf297c000 set: 3 blksize: 8192 bsi: 0 set-flg: 2 pwbcnt: 272 dbwrid: 0 obj: 54208 objn: 54202 tsn: 0 afn: 1 hash: [f2fc47f8,1181f3038] lru: [f2fc6b88,f2fc6968] obj-flags: object_ckpt_list ckptq: [1182ecf38,1182ecf38] fileq: [1182ecf58,1182ecf58] objq: [108712a28,108712a28] use: [1182dc790,1182dc790] wait: [NULL] st: XCURRENT md: SHR tch: 12 flags: buffer_dirty gotten_in_current_mode block_written_once redo_since_read LRBA: [0xc7.73b.0] HSCN: [0x0.1cbe52] HSUB: [1] Using State Objects ---------------------------------------- SO: 0x1182dc750, type: 24, owner: 0x11b452348, flag: INIT/-/-/0x00 (buffer) (CR) PR: 0x11b305810 FLG: 0x108000 class bit: (nil) kcbbfbp: [BH: 0xf2fc69f8, LINK: 0x1182dc790] where: kdswh05: kdsgrp, why: 0 buffer tsn: 0 rdba: 0x00410652 (1/67154) scn: 0x0000.001cbe52 seq: 0x01 flg: 0x02 tail: 0xbe520601 frmt: 0x02 chkval: 0x0000 type: 0x06=trans data tab 0, row 0, @0x1f9a tl: 6 fb: --H-FL-- lb: 0x0 cc: 1 col 0: [ 2] c1 02 tab 0, row 1, @0x1f94 tl: 6 fb: --H-FL-- lb: 0x2 cc: 1 col 0: [ 2] c1 15 end_of_block_dump (buffer) (CR) PR: 0x11b305810 FLG: 0x108000 st: XCURRENT md: SHR tch: 12 ? buffer header?status= XCURRENT mode=KCBMSHARE KCBMSHR current share ????? x$kcbbf ????? cache buffer handle SQL> select distinct KCBBPBH from x$kcbbf ; KCBBPBH ---------------- 00 00000000F2FC69F8 ==>0xf2fc69f8 SQL> select * from x$kcbbf where kcbbpbh='00000000F2FC69F8'; ADDR INDX INST_ID KCBBFSO_TYP KCBBFSO_FLG KCBBFSO_OWN ---------------- ---------- ---------- ----------- ----------- ---------------- KCBBFFLG KCBBFCR KCBBFCM KCBBFMBR KCBBPBH ---------- ---------- ---------- ---------------- ---------------- KCBBPBF X0KCBBPBH X0KCBBPBF X1KCBBPBH ---------------- ---------------- ---------------- ---------------- X1KCBBPBF KCBBFBH KCBBFWHR KCBBFWHY ---------------- ---------------- ---------- ---------- 00000001182DC750 748 1 24 1 000000011B452348 1081344 1 0 00 00000000F2FC69F8 00000001182DC750 00 00000001182DC750 00 00000001182DC7F8 00 583 0 SQL> desc x$kcbbf; Name Null? Type ----------------------------------------- -------- ---------------------------- ADDR RAW(8) INDX NUMBER INST_ID NUMBER KCBBFSO_TYP NUMBER KCBBFSO_FLG NUMBER KCBBFSO_OWN RAW(8) KCBBFFLG NUMBER KCBBFCR NUMBER KCBBFCM NUMBER KCBBFMBR RAW(8) KCBBPBH RAW(8) KCBBPBF RAW(8) X0KCBBPBH RAW(8) X0KCBBPBF RAW(8) X1KCBBPBH RAW(8) X1KCBBPBF RAW(8) KCBBFBH RAW(8) KCBBFWHR NUMBER KCBBFWHY NUMBER gdb ?? ?process??????kcbrls release buffer? ???cache buffer handle??? SQL> select distinct KCBBPBH from x$kcbbf ; KCBBPBH ---------------- 00

Read the article

Apache 2.2 and FastCGI stops responding, warnings, crashes

- by Brett

I've seen this question posted a few times using a Google search, with no real answers. I have a multi-threaded FastCGI application running with Apache 2.2 on FreeBSD 7.2. There are a few issues with it, and I am unable to really figure out the source of the problem even after poking through a bunch of the mod_fastcgi source code. My FastCGI application gets anywhere from 2 to 15 or so hits per second, and mostly services a back-end API (the majority of web server usage is for this, and not actually serving content). Everything seems to work ok under normal conditions, but recently this problem has been becoming worse. It starts out with the FastCGI process manager apparently trying to close unneeded processes, sending them a SIGTERM signal. I catch the signal, clean up some stuff, and exit (by calling exit()) with status code 0. This process seems to result in three log messages in my httpd error log: [Tue Jun 01 14:03:31 2010] [warn] FastCGI: (dynamic) server "/home/program/wwwroot/domains/www.mydomain.com/cgi-bin/program.cgi" (pid 98182) termination signaled [Tue Jun 01 14:03:31 2010] [warn] FastCGI: (dynamic) server "/home/program/wwwroot/domains/www.mydomain.com/cgi-bin/program.cgi" (pid 98182) terminated by calling exit with status '0' [Tue Jun 01 14:03:31 2010] [warn] FastCGI: (dynamic) server "/home/program/wwwroot/domains/www.mydomain.com/cgi-bin/program.cgi" restarted (pid 98294) I am not sure why it says it is restarting the process, but in any case no core dump is ever generated so I do believe it is the FastCGI process manager doing it's thing. This makes sense because it begins to happen after the initial load increase from restarting Apache. Since it's down for a few seconds, it gets hit with a couple of hundred requests over the first few seconds it's running again (sometimes even hitting the upper limit of MAXCLIENTS in Apache), and this seems to be the process manager doing the work of spawning more processes to handle the increased load. So this all seems fine, but here is where things get weird. There are really two problems that I see. First, my multithreaded FastCGI process spawns 25 worker threads, and all seem to be used according to my internal log files (multiple processes are clearly using multiple threads to do work). However it seems that 3 or 4 FastCGI processes is not enough to handle the 5 to 15 hit per second load, even though the requests take about .02s or so to process internally. In order to be at all responsive, it seems I need 50 or more FastCGI processes, leading me to believe that FastCGI does not realize that my program is multithreaded. I've read the documentation at http://www.fastcgi.com/mod_fastcgi/docs/mod_fastcgi.html and do not see any option pertaining to multithreaded-ness, and my internal code is more or less set up just like the examples provided by the FastCGI library. The second problem I am having is that once process termination has happened a bunch of times as above (and seemingly at random), I begin getting a lot of these messages in my error log: [Tue Jun 01 14:06:22 2010] [warn] (32)Broken pipe: FastCGI: write() to PM failed (ignore if a restart or shutdown is pending) The messages occur for about half the hits I get to the server, and it completely kills the responsiveness of my application - it seems FastCGI will look for a working "pipe" until it finds one, and fail to realize that whatever application it is trying to contact is dead. It does still work though, it's just incredibly unresponsive - sometimes taking up to 40 or so seconds to process a request. I recompiled mod_fastcgi with some extra debugging around the point of the error message, and it appears that the error happens when it tries to write() to the application. The call to write() fails with a -1 return code, and sets errno to EPIPE. I am noticing that the issue happens mostly when either a crash occurs in one of the FastCGI processes, or a bunch of them are seemingly terminated by the process manager. I haven't had any core dumps though, except for one, where the backtrace outputted by gdb is just a single call to free() at address 0x0000000000000000 with nothing else in the stack trace, so I don't really know what to make of that. I'm thinking it happens sometime after the SIGTERM signal is caught, maybe some global variable not being cleaned up properly or something.

Read the article

Windows Azure Use Case: Agility

- by BuckWoody

This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Description: Agility in this context is defined as the ability to quickly develop and deploy an application. In theory, the speed at which your organization can develop and deploy an application on available hardware is identical to what you could deploy in a distributed environment. But in practice, this is not always the case. Having an option to use a distributed environment can be much faster for the deployment and even the development process. Implementation: When an organization designs code, they are essentially becoming a Software-as-a-Service (SaaS) provider to their own organization. To do that, the IT operations team becomes the Infrastructure-as-a-Service (IaaS) to the development teams. From there, the software is developed and deployed using an Application Lifecycle Management (ALM) process. A simplified view of an ALM process is as follows: Requirements Analysis Design and Development Implementation Testing Deployment to Production Maintenance In an on-premise environment, this often equates to the following process map: Requirements Business requirements formed by Business Analysts, Developers and Data Professionals. Analysis Feasibility studies, including physical plant, security, manpower and other resources. Request is placed on the work task list if approved. Design and Development Code written according to organization’s chosen methodology, either on-premise or to multiple development teams on and off premise. Implementation Code checked into main branch. Code forked as needed. Testing Code deployed to on-premise Testing servers. If no server capacity available, more resources procured through standard budgeting and ordering processes. Manual and automated functional, load, security, etc. performed. Deployment to Production Server team involved to select platform and environments with available capacity. If no server capacity available, standard budgeting and procurement process followed. If no server capacity available, systems built, configured and put under standard organizational IT control. Systems configured for proper operating systems, patches, security and virus scans. System maintenance, HA/DR, backups and recovery plans configured and put into place. Maintenance Code changes evaluated and altered according to need. In a distributed computing environment like Windows Azure, the process maps a bit differently: Requirements Business requirements formed by Business Analysts, Developers and Data Professionals. Analysis Feasibility studies, including budget, security, manpower and other resources. Request is placed on the work task list if approved. Design and Development Code written according to organization’s chosen methodology, either on-premise or to multiple development teams on and off premise. Implementation Code checked into main branch. Code forked as needed. Testing Code deployed to Azure. Manual and automated functional, load, security, etc. performed. Deployment to Production Code deployed to Azure. Point in time backup and recovery plans configured and put into place.(HA/DR and automated backups already present in Azure fabric) Maintenance Code changes evaluated and altered according to need. This means that several steps can be removed or expedited. It also means that the business function requesting the application can be held directly responsible for the funding of that request, speeding the process further since the IT budgeting process may not be involved in the Azure scenario. An additional benefit is the “Azure Marketplace”, In effect this becomes an app store for Enterprises to select pre-defined code and data applications to mesh or bolt-in to their current code, possibly saving development time. Resources: Whitepaper download- What is ALM? http://go.microsoft.com/?linkid=9743693 Whitepaper download - ALM and Business Strategy: http://go.microsoft.com/?linkid=9743690 LiveMeeting Recording on ALM and Windows Azure (registration required, but free): http://www.microsoft.com/uk/msdn/visualstudio/contact-us.aspx?sbj=Developing with Windows Azure (ALM perspective) - 10:00-11:00 - 19th Jan 2011

Read the article

Creating a Synchronous BPEL composite using File Adapter

- by [email protected]

By default, the JDeveloper wizard generates asynchronous WSDLs when you use technology adapters. Typically, a user follows these steps when creating an adapter scenario in 11g: 1) Create a SOA Application with either "Composite with BPEL" or an "Empty Composite". Furthermore, if the user chooses "Empty Composite", then he or she is required to drop the "BPEL Process" from the "Service Components" pane onto the SOA Composite Editor. Either way, the user comes to the screen below where he/she fills in the process details. Please note that the user is required to choose "Define Service Later" as the template. 2) Creates the inbound service and outbound references and wires them with the BPEL component: 3) And, finally creates the BPEL process with the initiating <receive> activity to retrieve the payload and an <invoke> activity to write the payload. This is how most BPEL processes that use Adapters are modeled. And, if we scrutinize the generated WSDL, we can clearly see that the generated WSDL is one way and that makes the BPEL process asynchronous (see below) In other words, the inbound FileAdapter would poll for files in the directory and for every file that it finds there, it would translate the content into XML and publish to BPEL. But, since the BPEL process is asynchronous, the adapter would return immediately after the publish and perform the required post processing e.g. deletion/archival and so on. The disadvantage with such asynchronous BPEL processes is that it becomes difficult to throttle the inbound adapter. In otherwords, the inbound adapter would keep sending messages to BPEL without waiting for the downstream business processes to complete. This might lead to several issues including higher memory usage, CPU usage and so on. In order to alleviate these problems, we will manually tweak the WSDL and BPEL artifacts into synchronous processes. Once we have synchronous BPEL processes, the inbound adapter would automatically throttle itself since the adapter would be forced to wait for the downstream process to complete with a <reply> before processing the next file or message and so on. Please see the tweaked WSDL below and please note that we have converted the one-way to a two-way WSDL and thereby making the WSDL synchronous: Add a <reply> activity to the inbound adapter partnerlink at the end of your BPEL process e.g. Finally, your process will look like this: You are done. Please remember that such an excercise is NOT required for Mediator since the Mediator routing rules are sequential by default. In other words, the Mediator uses the caller thread (inbound file adapter thread) for processing the routing rules. This is the case even if the WSDL for mediator is one-way.

Read the article

Managing Operational Risk of Financial Services Processes – part 2/2

- by Sanjeev Sharma

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} In my earlier blog post, I had described the factors that lead to compliance complexity of financial services processes. In this post, I will outline the business implications of the increasing process compliance complexity and the specific role of BPM in addressing the operational risk reduction objectives of regulatory compliance. First, let’s look at the business implications of increasing complexity of process compliance for financial institutions: · Increased time and cost of compliance due to duplication of effort in conforming to regulatory requirements due to process changes driven by evolving regulatory mandates, shifting business priorities or internal/external audit requirements · Delays in audit reporting due to quality issues in reconciling non-standard process KPIs and integrity concerns arising from the need to rely on multiple data sources for a given process Next, let’s consider some approaches to managing the operational risk of business processes. Financial institutions considering reducing operational risk of their processes, generally speaking, have two choices: · Rip-and-replace existing applications with new off-the shelf applications. · Extend capabilities of existing applications by modeling their data and process interactions, with other applications or user-channels, outside of the application boundary using BPM. The benefit of the first approach is that compliance with new regulatory requirements would be embedded within the boundaries of these applications. However pre-built compliance of any packaged application or custom-built application should not be mistaken as a one-shot fix for future compliance needs. The reason is that business needs and regulatory requirements inevitably out grow end-to-end capabilities of even the most comprehensive packaged or custom-built business application. Thus, processes that originally resided within the application will eventually spill outside the application boundary. It is precisely at such hand-offs between applications or between overlaying processes where vulnerabilities arise to unknown and accidental faults that potentially result in errors and lead to partial or total failure. The gist of the above argument is that processes which reside outside application boundaries, in other words, span multiple applications constitute a latent operational risk that spans the end-to-end value chain. For instance, distortion of data flowing from an account-opening application to a credit-rating system if left un-checked renders compliance with “KYC” policies void even when the “KYC” checklist was enforced at the time of data capture by the account-opening application. Oracle Business Process Management is enabling financial institutions to lower operational risk of such process ”gaps” for Financial Services processes including “Customer On-boarding”, “Quote-to-Contract”, “Deposit/Loan Origination”, “Trade Exceptions”, “Interest Claim Tracking” etc.. If you are faced with a similar challenge and need any guidance on the same feel free to drop me a note.

Read the article

Forcing an External Activation with Service Broker

- by Davide Mauri

In these last days I’ve been working quite a lot with Service Broker, a technology I’m really happy to work with, since it can give a lot of satisfaction. The scale-out solution one can easily build is simply astonishing. I’m helping a company to build a very scalable and – yet almost inexpensive – invoicing system that has to be able to scale out using commodity hardware. To offload the work from the main server to satellite “compute nodes” (yes, I’ve borrowed this term from PDW) we’re using Service Broker and the External Activator application available in the SQL Server Feature Pack. For those who are not used to work with SSB, the External Activation is a feature that allows you to intercept the arrival of a message in a queue right from your application code. http://msdn.microsoft.com/en-us/library/ms171617.aspx (Look for “Event-Based Activation”) In order to make life even more easier, Microsoft released the External Activation application that saves you even from writing even this code. http://blogs.msdn.com/b/sql_service_broker/archive/tags/external+activator/ The External Activator application can be configured to execute your own application so that each time a message – an invoice in my case – arrives in the target queue, the invoking application is executed and the invoice is calculated. The very nice feature of External Activator is that it can automatically execute as many configured application in order to process as many messages as your system can handle. This also a lot of create a scale-out solution, leaving to the developer only a fraction of the problems that usually came with asynchronous programming. Developers are also shielded from Service Broker since everything can be encapsulated in Stored Procedures, so that – for them – developing such scale-out asynchronous solution is not much more complex than just executing a bunch of Stored Procedures. Now, if everything works correctly, you don’t have to bother of anything else. You put messages in the queue and your application, invoked by the External Activator, process them. But what happen if for some reason your application fails to process the messages. For examples, it crashes? The message is safe in the queue so you just need to process it again. But your application is invoked by the External Activator application, so now the question is, how do you wake up that app? Service Broker will engage the activation process only if certain conditions are met: http://msdn.microsoft.com/en-us/library/ms171601.aspx But how we can invoke the activation process manually, without having to wait for another message to arrive (the arrival of a new message is a condition that can fire the activation process)? The “trick” is to do manually with the activation process does: sending a system message to a queue in charge of handling External Activation messages: declare @conversationHandle uniqueidentifier; declare @n xml = N' <EVENT_INSTANCE> <EventType>QUEUE_ACTIVATION</EventType> <PostTime>' + CONVERT(CHAR(24),GETDATE(),126) + '</PostTime> <SPID>' + CAST(@@SPID AS VARCHAR(9)) + '</SPID> <ServerName>[your_server_name]</ServerName> <LoginName>[your_login_name]</LoginName> <UserName>[your_user_name]</UserName> <DatabaseName>[your_database_name]</DatabaseName> <SchemaName>[your_queue_schema_name]</SchemaName> <ObjectName>[your_queue_name]</ObjectName> <ObjectType>QUEUE</ObjectType> </EVENT_INSTANCE>' begin dialog conversation @conversationHandle from service [<your_initiator_service_name>] to service '<your_event_notification_service>' on contract [http://schemas.microsoft.com/SQL/Notifications/PostEventNotification] with encryption = off, lifetime = 6000 ; send on conversation @conversationHandle message type [http://schemas.microsoft.com/SQL/Notifications/EventNotification] (@n) ; end conversation @conversationHandle; That’s it! Put the code in a Stored Procedure and you can add to your application a button that says “Force Queue Processing” (or something similar) in order to start the activation process whenever you need it (which should not occur too frequently but it may happen). PS I know that the “fire-and-forget” (ending the conversation without waiting for an answer) technique is not a best practice, but in this case I don’t see how it can hurts so I decided to stay very close to the KISS principle []

Read the article

BPM Suite 11gR1 Released

- by Manoj Das

This morning (April 27th, 2010), Oracle BPM Suite 11gR1 became available for download from OTN and eDelivery. If you have been following our plans in this area, you know that this is the release unifying BEA ALBPM product, which became Oracle BPM10gR3, with the Oracle stack. Some of the highlights of this release are: BPMN 2.0 modeling and simulation Web based Process Composer for BPMN and Rules authoring Zero-code environment with full access to Oracle SOA Suite’s rich set of application and other adapters Process Spaces – Out-of-box integration with Web Center Suite Process Analytics – Native process cubes as well as integration with Oracle BAM You can learn more about this release from the documentation. Notes about downloading and installing Please note that Oracle BPM Suite 11gR1 is delivered and installed as part of SOA 11.1.1.3.0, which is a sparse release (only incremental patch). To install: Download and install SOA 11.1.1.2.0, which is a full release (you can find the bits at the above location) Download and install SOA 11.1.1.3.0 During configure step (using the Fusion Middleware configuration wizard), use the Oracle Business Process Management template supplied with the SOA Suite11g (11.1.1.3.0) If you plan to use Process Spaces, also install Web Center 11.1.1.3.0, which also is delivered as a sparse release and needs to be installed on top of Web Center 11.1.1.2.0 Some early feedback We have been receiving very encouraging feedback on this release. Some quotes from partners are included below: “I just attended a preview workshop on BPM Studio, Oracle's BPMN 2.0 tool, held by Clemens Utschig Utschig from Oracle HQ. The usability and ease to get started are impressive. In the business view analysts can intuitively start modeling, then developers refine in their own, more technical view. The BPM Studio sets itself apart from pure play BPMN 2.0 tools by being seamlessly integrated inside a holistic SOA / BPM toolset: BPMN models are placed in SCA-Composites in SOA Suite 11g. This allows to abstract away the complexities of SOA integration aspects from business process aspects. For UIs in BPMN tasks, you have the richness of ADF 11g based Frontends. With BPM Studio we architects have a new modeling and development IDE that gives us interesting design challenges to grasp and elaborate, since many things BPMN 2.0 are different from good ol' BPEL. For example, for simple transformations, you don't use BPEL "assign" any more, but add the transformation directly to the service call. There is much less XPath involved. And, there is no translation from model to BPEL code anymore, so the awkward process model to BPEL roundtrip, which never really worked as well as it looked on marketing slides, is obsolete: With BPMN 2.0 "the model is the code". Now, these are great times to start the journey into BPM! Some tips: Start Projects smoothly, with initial processes being not overly complex and not using the more esoteric areas of BPMN, to manage the learning path and to stay successful with each iteration. Verify non functional requirements by conducting performance and load tests early. As mentioned above, separate all technical integration logic into SOA Suite or Oracle Service Bus. And - share your experience!” Hajo Normann, SOA Architect - Oracle ACE Director - Co-Leader DOAG SIG SOA "Reuse of components across the Oracle 11G Fusion Middleware stack, like for instance a Database Adapter, is essential. It improves stability and predictability of the solution. BPM just is one of the components plugging into the stack and reuses all other components." Mr. Leon Smiers, Oracle Solution Architect, Capgemini “I had the opportunity to follow a hands-on workshop held by Clemens for Oracle partners and I was really impressed of the overall offering of BPM11g. BPM11g allows the execution of BPMN 2.0 processes, without having to transform/translate them first to BPEL in order to be executable. The fact that BPMN uses the same underlying service infrastructure of SOA Suite 11g has a lot of benefits for us already familiar with SOA Suite 11g. BPMN is just another SCA component within a SCA composite and can (re)use all the existing components like Rules, Human Workflow, Adapters and Mediator. I also like the fact that BPMN runs on the same service engine as BPEL. By that all known best practices for making a BPEL process reliable are valid for BPMN processes as well. Last but not least, BPMN is integrated into the superior end-to-end tracing of SOA Suite 11g. With BPM11g, Oracle offers a very competitive product which will have a big effect on the IT market. Clemens and Jürgen: Thanks for the great workshop! I’m really looking forward to my first project using Oracle BPM11g!” Guido Schmutz, Technology Manager / Oracle ACE Director for Fusion Middleware and SOA, Company: Trivadis Some earlier feedback were summarized in this post.

Read the article

Forcing an External Activation with Service Broker

- by Davide Mauri

In these last days I’ve been working quite a lot with Service Broker, a technology I’m really happy to work with, since it can give a lot of satisfaction. The scale-out solution one can easily build is simply astonishing. I’m helping a company to build a very scalable and – yet almost inexpensive – invoicing system that has to be able to scale out using commodity hardware. To offload the work from the main server to satellite “compute nodes” (yes, I’ve borrowed this term from PDW) we’re using Service Broker and the External Activator application available in the SQL Server Feature Pack. For those who are not used to work with SSB, the External Activation is a feature that allows you to intercept the arrival of a message in a queue right from your application code. http://msdn.microsoft.com/en-us/library/ms171617.aspx (Look for “Event-Based Activation”) In order to make life even more easier, Microsoft released the External Activation application that saves you even from writing even this code. http://blogs.msdn.com/b/sql_service_broker/archive/tags/external+activator/ The External Activator application can be configured to execute your own application so that each time a message – an invoice in my case – arrives in the target queue, the invoking application is executed and the invoice is calculated. The very nice feature of External Activator is that it can automatically execute as many configured application in order to process as many messages as your system can handle. This also a lot of create a scale-out solution, leaving to the developer only a fraction of the problems that usually came with asynchronous programming. Developers are also shielded from Service Broker since everything can be encapsulated in Stored Procedures, so that – for them – developing such scale-out asynchronous solution is not much more complex than just executing a bunch of Stored Procedures. Now, if everything works correctly, you don’t have to bother of anything else. You put messages in the queue and your application, invoked by the External Activator, process them. But what happen if for some reason your application fails to process the messages. For examples, it crashes? The message is safe in the queue so you just need to process it again. But your application is invoked by the External Activator application, so now the question is, how do you wake up that app? Service Broker will engage the activation process only if certain conditions are met: http://msdn.microsoft.com/en-us/library/ms171601.aspx But how we can invoke the activation process manually, without having to wait for another message to arrive (the arrival of a new message is a condition that can fire the activation process)? The “trick” is to do manually with the activation process does: sending a system message to a queue in charge of handling External Activation messages: declare @conversationHandle uniqueidentifier; declare @n xml = N' <EVENT_INSTANCE> <EventType>QUEUE_ACTIVATION</EventType> <PostTime>' + CONVERT(CHAR(24),GETDATE(),126) + '</PostTime> <SPID>' + CAST(@@SPID AS VARCHAR(9)) + '</SPID> <ServerName>[your_server_name]</ServerName> <LoginName>[your_login_name]</LoginName> <UserName>[your_user_name]</UserName> <DatabaseName>[your_database_name]</DatabaseName> <SchemaName>[your_queue_schema_name]</SchemaName> <ObjectName>[your_queue_name]</ObjectName> <ObjectType>QUEUE</ObjectType> </EVENT_INSTANCE>' begin dialog conversation @conversationHandle from service [<your_initiator_service_name>] to service '<your_event_notification_service>' on contract [http://schemas.microsoft.com/SQL/Notifications/PostEventNotification] with encryption = off, lifetime = 6000 ; send on conversation @conversationHandle message type [http://schemas.microsoft.com/SQL/Notifications/EventNotification] (@n) ; end conversation @conversationHandle; That’s it! Put the code in a Stored Procedure and you can add to your application a button that says “Force Queue Processing” (or something similar) in order to start the activation process whenever you need it (which should not occur too frequently but it may happen). PS I know that the “fire-and-forget” (ending the conversation without waiting for an answer) technique is not a best practice, but in this case I don’t see how it can hurts so I decided to stay very close to the KISS principle []

Read the article

Create a Smoother Period Close

- by Get Proactive Customer Adoption Team

Untitled Document Do You Use Oracle E-Business Suite Products Involved in Accounting Period Closes? We understand that closing the periods in your system at the end of an accounting period enables your company to make the right business decisions. We also know this requires prior preparation, good procedures, and quality data. To help you meet that need, Oracle E-Business Suite’s proactive support team developed the Period Close Advisor to help your organization conduct a smooth period close for its Oracle E-Business Suite 12 products. The Period Close Advisor is composed of logical steps you can follow, aligned by the business requirement flow. It will help with an orderly close of the product sub-ledgers before posting to the General Ledger. It combines recommendations and industry best practices with tips from subject matter experts for troubleshooting. You will find patches needed and references to assist you during each phase. Get to know the E-Business Suite Period Close Advisor The Period Close Advisor does more than help the users of Oracle E-Business Suite products close their period. You can use it before and throughout the period to stay on track. Proactively it assists you as you set up your company’s period close process. During the period, it helps evaluate your system’s readiness for initiating the period close procedures and prepare the system for a smooth period close experience. The Period Close Advisor gets you to answers when you have questions and gives you the latest news from us on Oracle E-Business Suite’s period close. The Period Close Advisor is the right place to start. How to Use the E-Business Suite Period Close The Period Close Advisor graphically guides you through your period close. The tabs show you the products (also called applications or sub-ledgers) covered, and the product order required for the processing to handle any dependencies between the products. Users of all the products it covers can benefit from the information it contains. Structure of the Period Close Advisor Clicking on a tab gives you the details for that particular step in the process. This includes an overview, showing how the products fit into the overall period close process, and step-by-step information on each phase needed to complete the period close for the tab. You will also find multimedia training and related resources you can access if you need more information. Once you click on any of the phases, you see guidance for that phase. This can include: Tips from the subject-matter experts—here are examples from a Cash Management specialist: “For organizations with high transaction volumes bank statements should be loaded and reconciled on a daily basis.” “The automatic reconciliation process can be set up to create miscellaneous transactions automatically.” References to useful Knowledge Base documents: Information Centers for the products and features FAQs on functionality Known Issues and patches with both the errors and their solutions How-to documents that explain in detail how to use a feature or complete a process White papers that give overview of a feature, list setup required to use the feature, etc. Links to diagnosticsthat help debug issues you may find in a process Additional information and alerts about a process or reports that can help you prevent issues from surfacing This excerpt from the “Process Transaction” phase for the Receivables product lists documents you’ll find helpful. How to Get Started with the Period Close Advisor The Period Close Advisor is a great resource that can be used both as a proactive tool (while setting up your period end procedures) and as the first document to refer to when you encounter an issue during the period close procedures! As mentioned earlier, the order of the product tabs in the Period Close Advisor gives you the recommended order of closing. The first thing to do is to ensure that you are following the prescribed order for closing the period, if you are using more than one sub-ledger. Next, review the information shared in the Evaluate and Prepare and Process Transactions phases. Make sure that you are following the recommended best practices; you have applied the recommended patches, etc. The Reconcile phase gives you the recommended steps to follow for reconciling a sub-ledger with the General Ledger. Ensure that your reconciliation procedure aligns with those steps. At any stage during the period close processing, if you encounter an issue, you can revisit the Period Close Advisor. Choose the product you have an issue with and then select the phase you are in. You will be able to review information that can help you find a solution to the issue you are facing. Stay Informed Oracle updates the Period Close Advisor as we learn of new issues and information. Bookmark the Oracle E-Business Suite Period Close Advisor [ID 335.1] and keep coming back to it for the latest information on period close

Read the article

How to Integrate ILMerge into Visual Studio Build Process to Merge Assemblies?

- by AMissico

I want to merge one .NET DLL assembly and one C# Class Library project referenced by a VB.NET Console Application project into one command-line console executable. I can do this with ILMerge from the command-line, but I want to integrate this merging of reference assemblies and projects into the Visual Studio project. From my reading, I understand that I can do this through a MSBuild Task or a Target and just add it to a C#/VB.NET Project file, but I can find no specific example since MSBuild is large topic. Moreover, I find some references that add the ILMerge command to the Post-build event. How do I integrate ILMerge into a Visual Studio (C#/VB.NET) project, which are just MSBuild projects, to merge all referenced assemblies (copy-local=true) into one assembly? How does this tie into a possible ILMerge.Targets file? Is it better to use the Post-build event?

Read the article

Java Runtime.getRuntime().exec() alternatives

- by twilbrand

I have a collection of webapps that are running under tomcat. Tomcat is configured to have as much as 2 GB of memory using the -Xmx argument. Many of the webapps need to perform a task that ends up making use of the following code: Runtime runtime = Runtime.getRuntime(); Process process = runtime.exec(command); process.waitFor(); ... The issue we are having is related to the way that this "child-process" is getting created on Linux (Redhat 4.4 and Centos 5.4). It's my understanding that an amount of memory equal to the amount tomcat is using needs to be free in the pool of physical (non-swap) system memory initially for this child process to be created. When we don't have enough free physical memory, we are getting this: java.io.IOException: error=12, Cannot allocate memory at java.lang.UNIXProcess.<init>(UNIXProcess.java:148) at java.lang.ProcessImpl.start(ProcessImpl.java:65) at java.lang.ProcessBuilder.start(ProcessBuilder.java:452) ... 28 more My questions are: 1) Is it possible to remove the requirement for an amount of memory equal to the parent process being free in the physical memory? I'm looking for an answer that allows me to specify how much memory the child process gets or to allow java on linux to access swap memory. 2) What are the alternatives to Runtime.getRuntime().exec() if no solution to #1 exists? I could only think of two, neither of which is very desirable. JNI (very un-desirable) or rewriting the program we are calling in java and making it it's own process that the webapp communicates with somehow. There has to be others. 3) Is there another side to this problem that I'm not seeing that could potentially fix it? Lowering the amount of memory used by tomcat is not an option. Increasing the memory on the server is always an option, but seems like more a band-aid. Servers are running java 6.

Read the article

Error when reloading supervisord: unix:///tmp/supervisor.sock no such file

- by Yarin

I'm running supervisord on my CentOS 6 box like so, /usr/bin/supervisord -c /etc/supervisord.conf and when I launch supervisorctl all process status are fine, but if I try to reload using supervisorctl I get unix:///tmp/supervisor.sock no such file I'm using the same config file I've used successfully on other boxes, and im running everything as root. I can't undesrtand what the problem is... Config file: ; Sample supervisor config file. [unix_http_server] file=/tmp/supervisor.sock ; (the path to the socket file) ;chmod=0700 ; socket file mode (default 0700) ;chown=nobody:nogroup ; socket file uid:gid owner ;username=user ; (default is no username (open server)) ;password=123 ; (default is no password (open server)) ;[inet_http_server] ; inet (TCP) server disabled by default ;port=127.0.0.1:9001 ; (ip_address:port specifier, *:port for all iface) ;username=user ; (default is no username (open server)) ;password=123 ; (default is no password (open server)) [supervisord] logfile=/tmp/supervisord.log ; (main log file;default $CWD/supervisord.log) logfile_maxbytes=50MB ; (max main logfile bytes b4 rotation;default 50MB) logfile_backups=10 ; (num of main logfile rotation backups;default 10) loglevel=info ; (log level;default info; others: debug,warn,trace) pidfile=/tmp/supervisord.pid ; (supervisord pidfile;default supervisord.pid) nodaemon=false ; (start in foreground if true;default false) minfds=1024 ; (min. avail startup file descriptors;default 1024) minprocs=200 ; (min. avail process descriptors;default 200) ;umask=022 ; (process file creation umask;default 022) ;user=chrism ; (default is current user, required if root) ;identifier=supervisor ; (supervisord identifier, default is 'supervisor') ;directory=/tmp ; (default is not to cd during start) ;nocleanup=true ; (don't clean up tempfiles at start;default false) ;childlogdir=/tmp ; ('AUTO' child log dir, default $TEMP) ;environment=KEY=value ; (key value pairs to add to environment) ;strip_ansi=false ; (strip ansi escape codes in logs; def. false) ; the below section must remain in the config file for RPC ; (supervisorctl/web interface) to work, additional interfaces may be ; added by defining them in separate rpcinterface: sections [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface [supervisorctl] serverurl=unix:///tmp/supervisor.sock ; use a unix:// URL for a unix socket ;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket ;username=chris ; should be same as http_username if set ;password=123 ; should be same as http_password if set ;prompt=mysupervisor ; cmd line prompt (default "supervisor") ;history_file=~/.sc_history ; use readline history if available ; The below sample program section shows all possible program subsection values, ; create one or more 'real' program: sections to be able to control them under ; supervisor. ;[program:foo] ;command=/bin/cat [program:embed_scheduler] command=/opt/web-apps/mywebsite/custom_process.py process_name=%(program_name)s_%(process_num)d numprocs=3 ;[program:theprogramname] ;command=/bin/cat ; the program (relative uses PATH, can take args) ;process_name=%(program_name)s ; process_name expr (default %(program_name)s) ;numprocs=1 ; number of processes copies to start (def 1) ;directory=/tmp ; directory to cwd to before exec (def no cwd) ;umask=022 ; umask for process (default None) ;priority=999 ; the relative start priority (default 999) ;autostart=true ; start at supervisord start (default: true) ;autorestart=unexpected ; whether/when to restart (default: unexpected) ;startsecs=1 ; number of secs prog must stay running (def. 1) ;startretries=3 ; max # of serial start failures (default 3) ;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2) ;stopsignal=QUIT ; signal used to kill process (default TERM) ;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10) ;killasgroup=false ; SIGKILL the UNIX process group (def false) ;user=chrism ; setuid to this UNIX account to run the program ;redirect_stderr=true ; redirect proc stderr to stdout (default false) ;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO ;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10) ;stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0) ;stdout_events_enabled=false ; emit events on stdout writes (default false) ;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO ;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stderr_logfile_backups=10 ; # of stderr logfile backups (default 10) ;stderr_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0) ;stderr_events_enabled=false ; emit events on stderr writes (default false) ;environment=A=1,B=2 ; process environment additions (def no adds) ;serverurl=AUTO ; override serverurl computation (childutils) ; The below sample eventlistener section shows all possible ; eventlistener subsection values, create one or more 'real' ; eventlistener: sections to be able to handle event notifications ; sent by supervisor. ;[eventlistener:theeventlistenername] ;command=/bin/eventlistener ; the program (relative uses PATH, can take args) ;process_name=%(program_name)s ; process_name expr (default %(program_name)s) ;numprocs=1 ; number of processes copies to start (def 1) ;events=EVENT ; event notif. types to subscribe to (req'd) ;buffer_size=10 ; event buffer queue size (default 10) ;directory=/tmp ; directory to cwd to before exec (def no cwd) ;umask=022 ; umask for process (default None) ;priority=-1 ; the relative start priority (default -1) ;autostart=true ; start at supervisord start (default: true) ;autorestart=unexpected ; whether/when to restart (default: unexpected) ;startsecs=1 ; number of secs prog must stay running (def. 1) ;startretries=3 ; max # of serial start failures (default 3) ;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2) ;stopsignal=QUIT ; signal used to kill process (default TERM) ;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10) ;killasgroup=false ; SIGKILL the UNIX process group (def false) ;user=chrism ; setuid to this UNIX account to run the program ;redirect_stderr=true ; redirect proc stderr to stdout (default false) ;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO ;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10) ;stdout_events_enabled=false ; emit events on stdout writes (default false) ;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO ;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stderr_logfile_backups ; # of stderr logfile backups (default 10) ;stderr_events_enabled=false ; emit events on stderr writes (default false) ;environment=A=1,B=2 ; process environment additions ;serverurl=AUTO ; override serverurl computation (childutils) ; The below sample group section shows all possible group values, ; create one or more 'real' group: sections to create "heterogeneous" ; process groups. ;[group:thegroupname] ;programs=progname1,progname2 ; each refers to 'x' in [program:x] definitions ;priority=999 ; the relative start priority (default 999) ; The [include] section can just contain the "files" setting. This ; setting can list multiple files (separated by whitespace or ; newlines). It can also contain wildcards. The filenames are ; interpreted as relative to this file. Included files *cannot* ; include files themselves. ;[include] ;files = relative/directory/*.ini

Read the article

Rebooting access point via SSH with pexpect... hangs. Any ideas?

- by MiniQuark

When I want to reboot my D-Link DWL-3200-AP access point from my bash shell, I connect to the AP using ssh and I just type reboot in the CLI interface. After about 30 seconds, the AP is rebooted: # ssh [email protected] [email protected]'s password: ******** Welcome to Wireless SSH Console!! ['help' or '?' to see commands] Wireless Driver Rev 4.0.0.167 D-Link Access Point wlan1 -> reboot Sound's great? Well unfortunately the ssh client process never exits, for some reason (maybe the AP kills the ssh server a bit too fast, I don't know). My ssh client process is completely blocked (even if I wait for several minutes, nothing happens). I always have to wait for the AP to reboot, then open another shell, find the ssh client process ID (using ps aux | grep ssh) then kill the ssh process using kill <pid>. That's quite annoying. So I decided to write a python script to reboot the AP. The script connects to the AP's CLI interface via ssh, using python-pexpect, and it tries to launch the "reboot" command. Here's what the script looks like: #!/usr/bin/python # usage: python reboot_ap.py {host} {user} {password} import pexpect import sys import time command = "ssh %(user)s@%(host)s"%{"user":sys.argv[2], "host":sys.argv[1]} session = pexpect.spawn(command, timeout=30) # start ssh process response = session.expect(r"password:") # wait for password prompt session.sendline(sys.argv[3]) # send password session.expect(" -> ") # wait for D-Link CLI prompt session.sendline("reboot") # send the reboot command time.sleep(60) # make sure the reboot has time to actually take place session.close(force=True) # kill the ssh process The script connects properly to the AP (I tried running some other commands than reboot, they work fine), it sends the reboot command, waits for one minute, then kills the ssh process. The problem is: this time, the AP never reboots! I have no idea why. Any solution, anyone?

Read the article

Is jQuery.parseJSON able to process all valid json?

- by murze

This piece of valid json (it has been generated using php's json_encode): {"html":"form is NOT valid<form id=\"articleform\" enctype=\"application\/x-www-form-urlencoded\" method=\"post\" action=\"\"><dl class=\"zend_form\">\n<dt id=\"title-label\"> <\/dt>\n<dd id=\"title-element\">\n<input type=\"text\" name=\"title\" id=\"title\" value=\"Artikel K\"><\/dd>\n<dt id=\"articleFormSubmitted-label\"> <\/dt>\n<dd id=\"articleFormSubmitted-element\">\n<input type=\"hidden\" name=\"articleFormSubmitted\" value=\"1\" id=\"articleFormSubmitted\"><\/dd>\n<dt id=\"submit-label\"> <\/dt><dd id=\"submit-element\">\n<input type=\"submit\" name=\"submit\" id=\"submit\" value=\"Bewaar artikel\" onclick=\"this.value='Bezig...';\"><\/dd><\/dl><\/form><script type=\"text\/javascript\">\n\t $(\"#articleform\").submit(function(){\n $.post(\"\/admin\/ajax\/contenttree\/node\/9\/ajaxtarget\/ajaxContainer\", $(\"#articleform\").serialize(), function(html){$(\"#ajaxContainer\").html(html);} );\n\t\t return false;\n\t });\n\n <\/script>","newNodeName":""} is giving jQuery.parseJSON(data) and me a hard time. With this piece of code: alert('start'); alert(data); jQuery.parseJSON(data) alert('stop'); I get a message start and then the data (jsonstring above) is shown. The message "stop" never appears. When I use this json: {"html":"test","newNodeName":""} I've verified that my first big chick of json is valid. Why isn't it processed by jQuery.parseJSON Are there any special characters that don't go well with json?

Search Results

Search found 21664 results on 867 pages for 'process innovation'.

Page 111/867 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118 | Next Page >

- by ddysart

- by Marco Russo (SQLBI)

- by cjmUK

- by Shawn

- by idea_

- by Matt S.

- by jbp117

- by jbp117

- by Jake

- by omrihsan

- by Liu Maclean(???)

- by Brett

- by BuckWoody

- by [email protected]

- by Sanjeev Sharma

- by Davide Mauri

- by Manoj Das

- by Davide Mauri

- by Get Proactive Customer Adoption Team

- by AMissico

- by twilbrand

- by Yarin

- by MiniQuark

- by murze

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118 | Next Page >