Search Results

Search found 3496 results on 140 pages for 'reset'.

Page 111/140 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

  • Fork in Perl not working inside a while loop reading from file

    - by Sag
    Hi, I'm running a while loop reading each line in a file, and then fork processes with the data of the line to a child. After N lines I want to wait for the child processes to end and continue with the next N lines, etc. It looks something like this: while ($w=<INP>) { # ignore file header if ($w=~m/^\D/) { next;} # get data from line chomp $w; @ws = split(/\s/,$w); $m = int($ws[0]); $d = int($ws[1]); $h = int($ws[2]); # only for some days in the year if (($m==3)and($d==15) or ($m==4)and($d==21) or ($m==7)and($d==18)) { die "could not fork" unless defined (my $pid = fork); unless ($pid) { some instructions here using $m, $d, $h ... } push @qpid,$pid; # when all processors are busy, wait for child processes if ($#qpid==($procs-1)) { for my $pid (@qpid) { waitpid $pid, 0; } reset 'q'; } } } close INP; This is not working. After the first round of processes I get some PID equal to 0, the @qpid array gets mixed up, and the file starts to get read at (apparently) random places, jumping back and forth. The end result is that most lines in the file get read two or three times. Any ideas? Thanks a lot in advance, S.

    Read the article

  • nhibernate error recovery

    - by Berryl
    I downloaded Rhino Security today and started going through some of the tests. Several that run perfectly in isolation start getting errors after one that purposely raises an exception runs though. Here is that test: [Test] public void EntitesGroup_CanCreate() { var group = _authorizationRepository.CreateEntitiesGroup("Accounts"); _session.Flush(); _session.Evict(group); var fromDb = _session.Get<EntitiesGroup>(group.Id); Assert.NotNull(fromDb); Assert.That(fromDb.Name, Is.EqualTo(group.Name)); } And here are the tests and error messages that fail: [Test] public void User_CanSave() { var ayende = new User {Name = "ayende"}; _session.Save(ayende); _session.Flush(); _session.Evict(ayende); var fromDb = _session.Get<User>(ayende.Id); Assert.That(fromDb, Is.Not.Null); Assert.That(ayende.Name, Is.EqualTo(fromDb.Name)); } ----> System.Data.SQLite.SQLiteException : Abort due to constraint violation column Name is not unique [Test] public void UsersGroup_CanCreate() { var group = _authorizationRepository.CreateUsersGroup("Admininstrators"); _session.Flush(); _session.Evict(group); var fromDb = _session.Get<UsersGroup>(group.Id); Assert.NotNull(fromDb); Assert.That(fromDb.Name, Is.EqualTo(group.Name)); } failed: NHibernate.AssertionFailure : null id in Rhino.Security.Tests.User entry (don't flush the Session after an exception occurs) Does anyone see how I can reset the state of the in memory SQLite db after the first test? I changed the code to use nunit instead of xunit so maybe that is part of the problem here as well. Cheers, Berryl

    Read the article

  • 'SImple' 2 class Java calculator doesn't accept inputs or do calculations

    - by Tony O'Keeffe
    Hi, I'm trying to get a two class java calculator working (new to java) to work but so far i'm having no success. the two classes are outlined below, calcFrame is for the interface and calEngine should do the actual calculations but i can't get them to talk to one another. i'd really appreciate any assistance on same. Thanks. CalcFrame Code - import java.awt.; import javax.swing.; import javax.swing.border.; import java.awt.event.; /** *A Class that operates as the framework for a calculator. *No calculations are performed in this section */ public class CalcFrame implements ActionListener { private CalcEngine calc; private JFrame frame; private JTextField display; private JLabel status; /** * Constructor for objects of class GridLayoutExample */ public CalcFrame() { makeFrame(); //calc = engine; } /** * This allows you to quit the calculator. */ // Alows the class to quit. private void quit() { System.exit(0); } // Calls the dialog frame with the information about the project. private void showAbout() { JOptionPane.showMessageDialog(frame, "Group Project", "About Calculator Group Project", JOptionPane.INFORMATION_MESSAGE); } private void makeFrame() { frame = new JFrame("Group Project Calculator"); makeMenuBar(frame); JPanel contentPane = (JPanel)frame.getContentPane(); contentPane.setLayout(new BorderLayout(8, 8)); contentPane.setBorder(new EmptyBorder( 10, 10, 10, 10)); /** * Insert a text field */ display = new JTextField(); contentPane.add(display, BorderLayout.NORTH); //Container contentPane = frame.getContentPane(); contentPane.setLayout(new GridLayout(4, 4)); JPanel buttonPanel = new JPanel(new GridLayout(4, 4)); contentPane.add(new JButton("1")); contentPane.add(new JButton("2")); contentPane.add(new JButton("3")); contentPane.add(new JButton("4")); contentPane.add(new JButton("5")); contentPane.add(new JButton("6")); contentPane.add(new JButton("7")); contentPane.add(new JButton("8")); contentPane.add(new JButton("9")); contentPane.add(new JButton("0")); contentPane.add(new JButton("+")); contentPane.add(new JButton("-")); contentPane.add(new JButton("/")); contentPane.add(new JButton("*")); contentPane.add(new JButton("=")); contentPane.add(new JButton("C")); contentPane.add(buttonPanel, BorderLayout.CENTER); //status = new JLabel(calc.getAuthor()); //contentPane.add(status, BorderLayout.SOUTH); frame.pack(); frame.setVisible(true); } /** * Create the main frame's menu bar. * The frame that the menu bar should be added to. */ private void makeMenuBar(JFrame frame) { final int SHORTCUT_MASK = Toolkit.getDefaultToolkit().getMenuShortcutKeyMask(); JMenuBar menubar = new JMenuBar(); frame.setJMenuBar(menubar); JMenu menu; JMenuItem item; // create the File menu menu = new JMenu("File"); menubar.add(menu); // create the Quit menu with a shortcut "Q" key. item = new JMenuItem("Quit"); item.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_Q, SHORTCUT_MASK)); item.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { quit(); } }); menu.add(item); // Adds an about menu. menu = new JMenu("About"); menubar.add(menu); // Displays item = new JMenuItem("Calculator Project"); item.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { showAbout(); } }); menu.add(item); } /** * An interface action has been performed. * Find out what it was and handle it. * @param event The event that has occured. */ public void actionPerformed(ActionEvent event) { String command = event.getActionCommand(); if(command.equals("0") || command.equals("1") || command.equals("2") || command.equals("3") || command.equals("4") || command.equals("5") || command.equals("6") || command.equals("7") || command.equals("8") || command.equals("9")) { int number = Integer.parseInt(command); calc.numberPressed(number); } else if(command.equals("+")) { calc.plus(); } else if(command.equals("-")) { calc.minus(); } else if(command.equals("=")) { calc.equals(); } else if(command.equals("C")) { calc.clear(); } else if(command.equals("?")) { } // else unknown command. redisplay(); } /** * Update the interface display to show the current value of the * calculator. */ private void redisplay() { display.setText("" + calc.getDisplayValue()); } /** * Toggle the info display in the calculator's status area between the * author and version information. */ } CalcEngine - public class CalcEngine { // The calculator's state is maintained in three fields: // buildingDisplayValue, haveLeftOperand, and lastOperator. // The current value (to be) shown in the display. private int displayValue; // The value of an existing left operand. private int leftOperand; /** * Create a CalcEngine. */ public CalcEngine() { clear(); } public int getDisplayValue() { return displayValue; } /** * A number button was pressed. * Either start a new operand, or incorporate this number as * the least significant digit of an existing one. * @param number The number pressed on the calculator. */ public void numberPressed(int number) { if(buildingDisplayValue) { // Incorporate this digit. displayValue = displayValue*10 + number; } else { // Start building a new number. displayValue = number; buildingDisplayValue = true; } } /** * The 'plus' button was pressed. */ public void plus() { applyOperator('+'); } /** * The 'minus' button was pressed. */ public void minus() { applyOperator('-'); } /** * The '=' button was pressed. */ public void equals() { // This should completes the building of a second operand, // so ensure that we really have a left operand, an operator // and a right operand. if(haveLeftOperand && lastOperator != '?' && buildingDisplayValue) { calculateResult(); lastOperator = '?'; buildingDisplayValue = false; } else { keySequenceError(); } } /** * The 'C' (clear) button was pressed. * Reset everything to a starting state. */ public void clear() { lastOperator = '?'; haveLeftOperand = false; buildingDisplayValue = false; displayValue = 0; } /** * @return The title of this calculation engine. */ public String getTitle() { return "Java Calculator"; } /** * @return The author of this engine. */ public String getAuthor() { return "David J. Barnes and Michael Kolling"; } /** * @return The version number of this engine. */ public String getVersion() { return "Version 1.0"; } /** * Combine leftOperand, lastOperator, and the * current display value. * The result becomes both the leftOperand and * the new display value. */ private void calculateResult() { switch(lastOperator) { case '+': displayValue = leftOperand + displayValue; haveLeftOperand = true; leftOperand = displayValue; break; case '-': displayValue = leftOperand - displayValue; haveLeftOperand = true; leftOperand = displayValue; break; default: keySequenceError(); break; } } /** * Apply an operator. * @param operator The operator to apply. */ private void applyOperator(char operator) { // If we are not in the process of building a new operand // then it is an error, unless we have just calculated a // result using '='. if(!buildingDisplayValue && !(haveLeftOperand && lastOperator == '?')) { keySequenceError(); return; } if(lastOperator != '?') { // First apply the previous operator. calculateResult(); } else { // The displayValue now becomes the left operand of this // new operator. haveLeftOperand = true; leftOperand = displayValue; } lastOperator = operator; buildingDisplayValue = false; } /** * Report an error in the sequence of keys that was pressed. */ private void keySequenceError() { System.out.println("A key sequence error has occurred."); // Reset everything. clear(); } }

    Read the article

  • Drupal theme preprocess function - primary links

    - by slimcady
    I recently wrote a theme function to add a class to my primary links that works great. I then wrote some css classes to style these links with custom background images. Worked out great. Now comes the problem, the link text for the primary links still is displayed. Normally this isn't a problem as I would just wrap the in a with a custom "hide" class. For example: <span class="hide"><a href="#">Link Text</a></span> So my question is how can I loop through the primary links and wrap the text w/ a <span> like my example? Here's my theme function that I used to add my classes. function zkc_preprocess_page(&$vars, $hook) { // Make a shortcut for the primary links variables $primary_links = $vars['primary_links']; // Loop thru the menu, adding a new class for CSS selectors $i = 1; foreach ($primary_links as $link => $attributes){ // Append the new class to existing classes for each menu item $class = $attributes['attributes']['class'] . " item-$i"; // Add revised classes back to the primary links temp variable $primary_links[$link]['$attributes']['class'] = $class; $i++; } // end the foreach loop // reset the variable to contain the new markup $vars['primary_links'] = $primary_links; }

    Read the article

  • iPhone: contentInset isn't animating

    - by Cuzog
    In my app, I have a table view. When the user clicks a button, a UIView overlays part of that table view. It's essentially a partial modal. That table view is intentionally still scrollable while that modal is active. To allow the user to scroll to the bottom of the table view, I change the contentInset and scrollIndicatorInsets values to adjust for the smaller area above the modal. When the modal is taken away, I reset those inset values. The problem is that when the user has scrolled to the bottom of the newly adjusted inset and then dismisses the modal, the table view jumps abruptly to a new scroll position because the inset is changed instantly. I would like to animate it so there is a transition, but the beginAnimation/commitAnimations methods aren't affecting it for some reason. Any ideas as to why the values aren't getting animated? Any help is greatly appreciated! The relevant code from the table view controller is here: - (void)viewDidLoad { [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(modalOpened) name:@"ModalStartedOpening" object:nil]; [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(modalDismissed) name:@"ModalStartedClosing" object:nil]; [super viewDidLoad]; } - (void)modalOpened { [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:0.5]; [UIView setAnimationDelegate:self]; self.tableView.contentInset = UIEdgeInsetsMake(0, 0, 201, 0); self.tableView.scrollIndicatorInsets = UIEdgeInsetsMake(0, 0, 201, 0); [UIView commitAnimations]; } - (void)modalDismissed { [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:0.5]; [UIView setAnimationDelegate:self]; self.tableView.contentInset = UIEdgeInsetsMake(0, 0, 0, 0); self.tableView.scrollIndicatorInsets = UIEdgeInsetsMake(0, 0, 0, 0); [UIView commitAnimations]; }

    Read the article

  • Declaring Intent Filter in android

    - by Rahul Varma
    Hi, I have problem in declaring the intents on my app. I have a form with text fields and spinner. I have added a button which onClick must display Datepicker. I have declared the DatePicker as a new class and added to intent onCLick. date.setOnClickListener(new View.OnClickListener() { public void onClick(View view) { Intent i=new Intent(SendMail.this,DatePicker.class); startActivity(i); } }); In manifest i have declared <activity android:name=".DatePicker"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> Now the problem is when i click the button the whole form is getting reset and all the spinner values are getting vanished. This must be because of declaring the intent wrongly. So, can anyone specify how to declare my intent so that the DatePicker will be called on the main form iteself

    Read the article

  • How do you clear a CustomValidator Error on a Button click event?

    - by George
    I have a composite User control for entering dates: The CustomValidator will include server sided validation code. I would like the error message to be cleared via client sided script if the user alters teh date value in any way. To do this, I included the following code to hook up the two drop downs and the year text box to the validation control: <script type="text/javascript"> ValidatorHookupControlID("<%= ddlMonth.ClientID%>", document.getElementById("<%= CustomValidator1.ClientID%>")); ValidatorHookupControlID("<%= ddlDate.ClientID%>", document.getElementById("<%= CustomValidator1.ClientID%>")); ValidatorHookupControlID("<%= txtYear.ClientID%>", document.getElementById("<%= CustomValidator1.ClientID%>")); </script> However, I would also like the Validation error to be cleared when the user clicks the clear button. When the user clicks the Clear button, the other 3 controls are reset. To avoid a Post back, the Clear button is a regular HTML button with an OnClick event that resets the 3 controls. Unfortunately, the ValidatorHookupControlID method does not seem to work on HTML controls, so I thought to change the HTML Button to an ASP button and to Hookup to that control instead. However, I cannot seem to eliminate the Postback functionality associated by default with the ASP button control. I tried to set the UseSubmitBehavior to False, but it still submits. I tried to return false in my btnClear_OnClick client code, but the code sent to the browser included a DoPostback call after my call. btnClear.Attributes.Add("onClick", "btnClear_OnClick();") Instead of adding OnClick code, I tried overwriting it, but the DoPostBack code was still included in the final code that was sent to the browser. What do I have to do to get the Clear button to clear the CustomValidator error when clicked and avoid a postback? btnClear.Attributes.Item("onClick") = "btnClear_OnClick();"

    Read the article

  • Designing secure consumer blackberry application

    - by Kiran Kuppa
    I am evaluating a requirement for a consumer blackberry application that places high premium on security of user's data. Seems like it is an insurance company. Here are my ideas on how I could go about it. I am sure this would be useful for others who are looking for similar stuff Force the user to use device password. (I am guessing that this would be possible - though not checked it yet). Application can request notifications when the device is about to be locked and just after it has been unlocked. Encryption of application specific data can be managed at those times. Application data would be encrypted with user's password. User's credentials would be encrypted with device password. Remote backup of the data could be done over HTTPS (any better ideas are appreciated) Questions: What if the user forgets his device password. If the user forgets his application password, what is the best and secure way to reset the password? If the user losses the phone, remote backup must be done and the application data must be cleaned up. I have some ideas on how to achieve (3) and shall share them. There must be an off-line verification of the user's identity and the administrator must provide a channel using which the user must be able to send command to the device to perform the wiping of application data. The idea is that the user is ALWAYS in control of his data. Without the user's consent, even the admin must not be able to do activities such as cleaning up the data. In the above scheme of things, it appears as if the user's password need not be sent over the air to server. Am I correct? Thanks, --Kiran Kumar

    Read the article

  • Using Javascript to flip flop a textbox's readonly flag

    - by Velika
    I have a frame with several radio buttons where the user is supposed to select the "Category" that his Occupation falls into and then unconditionally also specify his occupation. If the user selects "Retired", the requirement is to prefill "Retired" in the "Specify Occupation" text box and to disable it to prevent it from being changed. The Specify Occupation text box should also no longer be a tab stop. If the user selects a radio button other than Retired the Specify Occupation text box should be enabled and once again in the normal tab sequence. Originally, I was setting and clearing the disabled property on the Specify occupation textbox, then I found out that, upon submitting the form, disabled fields are excluded from the submit and the REQUIRED validator on the Specify Occupation textbox was being raised because the textbox was being blanked out. What is the best way to solve this? My approach below was to mimic a disabled text box by setting/resetting the readonly attribute on the text box and changing the background color to make it appear disabled. (I suppose I should be changing the forecolor instead of teh background color). Nevertheless, my code to make the textbox readonly and to reset it doesn't appear to be working. function OccupationOnClick(sender) { debugger; var optOccupationRetired = document.getElementById("<%= optOccupationRetired.ClientId %>"); var txtSpecifyOccupation = document.getElementById("<%= txtSpecifyOccupation.ClientId %>"); var optOccupationOther = document.getElementById("<%= optOccupationOther.ClientId %>"); if (sender == optOccupationRetired) { txtSpecifyOccupation.value = "Retired" txtSpecifyOccupation.readonly = "readonly"; txtSpecifyOccupation.style.backgroundColor = "#E0E0E0"; txtSpecifyOccupation.tabIndex = -1; } else { if (txtSpecifyOccupation.value == "Retired") txtSpecifyOccupation.value = ""; txtSpecifyOccupation.style.backgroundColor = "#FFFFFF"; txtSpecifyOccupation.readonly = ""; txtSpecifyOccupation.tabIndex = 0; } } Can someone provide a suggest for the best way to handle this scenario and porovide a tweek to the code above to fix the setting/resetting on the readonly property?

    Read the article

  • HTML5 optimalize to IE6.0

    - by marharépa
    Hello! Do you know any method to optimize this HTML Code to IE6 or 7 (or 8) without adding any HTML elements, or the IE is skipping all the HTML5 elements? <!DOCTYPE HTML> <head> <meta charset="UTF-8"> <title>title</title> <link type="text/css" rel="stylesheet" href="reset.css"> <link type="text/css" rel="stylesheet" href="style.css"> </head> <body> <header>code of header</header> <nav> code of nav </nav> <section> code of gallery </section> <article> code of article </article> <footer>code of footer</footer> </body> </html> Thank you.

    Read the article

  • SD card initialization using SPI interface

    - by Tobias
    I get invalid response Codes from my SD Card(CMD8, CMD55, CMD41) Init routine: SDCS = 1; // MMC deaktiviert SPI1CON1bits.SMP = 0; SPI1CON1bits.CKE = 1; SPI1CON1bits.MSTEN = 1; SPI1CON1bits.CKP = 0; SPI1STATbits.SPIEN = 1; for(i=0;i<10;i++) SPI(0xFF); // RESET unsigned char rr=Command(CMD0,0); SDCS=1; // MMC deactivated /*OK response == 1*/ r=Command(CMD8,0); // check voltage SDCS=1; /* response == 0xC1 ?!? */ r = Command(CMD58,0); // READ_OCR unsigned char ocr1 = SPI(0xFF); unsigned char ocr2 = SPI(0xFF); unsigned char ocr3 = SPI(0xFF); unsigned char ocr4 = SPI(0xFF); unsigned char ocr5 = SPI(0xFF); /* r = 0xF8; ?!? ocr1 = 0x0F; ocr2 = 0xFF; ocr3 = 0xFF; ocr4 = 0xFF; ocr5 = 0xFF; */ SDCS=1; // INIT unsigned char rrr = 0; i=10000; do { rrr=Command(55,0); // Next is APP CMD SDCS=1; if(r) break; }while(--i>0); /* OK response == 1 */ // APP CMD 41 with OCR = 0x0F?? You can read the response codes in the comments. Is it possible the response code to CMD8 is 0xC1? Bit 7 should be 0, right? Is it a hardware error?

    Read the article

  • Publish failed using Ant publisher (Eclipse/datanucleus).

    - by aronp
    Dear All, I am being driven mad the following (apparently hard) error from eclipse. Publish failed using Ant publisher Resource is out of sync with the file system: '/MyServlet/build/classes/com/inver/hotzones/database/BaseNetworkData.class'. I have seen comments on similar errors where refreshing eclipses view of the project helps but it is not helping me. Have tried cleaning the project, removing it from the webserver, deleting war files but cant seem to clear it. I have reset my TMPDIR variable so that it uses a directory on the same filesystem as that appeared to be another possible cause. The error occurs on classes which have been enhanced by datanuculeus. I have auto-enhance on the project. The other references to this problem indicate that it is due to Eclipses view of the project being out of step with the filesystem, and I am guessing that this has something to do with thedata nucleus enhancement. Any ideas? Thanks. I am using Eclipse 3.5.2 with latest datanucleus pluggins. Stack trace org.eclipse.core.runtime.CoreException: Resource is out of sync with the file system: '/MyServlet/build/classes/com/inver/hotzones/database/BaseNetworkData.class'. at org.eclipse.jst.server.generic.core.internal.publishers.AbstractModuleAssembler.copyModule(AbstractModuleAssembler.java:172) at org.eclipse.jst.server.generic.core.internal.publishers.WarModuleAssembler.assemble(WarModuleAssembler.java:31) at org.eclipse.jst.server.generic.core.internal.publishers.AntPublisher.assembleModule(AntPublisher.java:167) at org.eclipse.jst.server.generic.core.internal.publishers.AntPublisher.publish(AntPublisher.java:128) at org.eclipse.jst.server.generic.core.internal.GenericServerBehaviour.publishModule(GenericServerBehaviour.java:82) at org.eclipse.wst.server.core.model.ServerBehaviourDelegate.publishModule(ServerBehaviourDelegate.java:949) at org.eclipse.wst.server.core.model.ServerBehaviourDelegate.publishModules(ServerBehaviourDelegate.java:1039) at org.eclipse.wst.server.core.model.ServerBehaviourDelegate.publish(ServerBehaviourDelegate.java:872) at org.eclipse.wst.server.core.model.ServerBehaviourDelegate.publish(ServerBehaviourDelegate.java:708) at org.eclipse.wst.server.core.internal.Server.publishImpl(Server.java:2731) at org.eclipse.wst.server.core.internal.Server$PublishJob.run(Server.java:278) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)

    Read the article

  • Passing an instance variable through RJS?

    - by Elliot
    Hey guys here is my code (roughly): books.html.erb <% @books.each do |book| %> <% @bookid = book.id %> <div id="enter_stuff"> <%= render "input", :bookid => @bookid %> </div> <%end%> _input.html.erb <% @book = Book.find_by_id(@bookid) %> <strong>your book is: <%=h @book.name %></strong> create.rjs page.replace_html :enter_stuff, :partial => 'input', :object => @bookid The problem here is that only create.js doesn't seem to work (though, if instead of passing the partial I passed "..." it does work, so I know its that there are instance variables in the partial that aren't being reset. Any ideas?) So the final question, is how do I pass an instance variable to a partial through the create.rjs file? p.s. I know I will have duplicate div IDs, I'm not worrying about that for now though. Best, Elliot

    Read the article

  • django: cannot import settings, cannot login to admin, cannot change admin password

    - by xpanta
    Hi, It seems that I am completely lost here. Yesterday I noticed that I cannot login to the admin panel (don't use it much, so it's been some weeks since last login). I thought that I might have changed the admin password and now I can't remember it (though I doubt it). I tried django-admin.py changepassword (using django 1.2.1) but it said that 'changepassword' is unknown command (I have all the necessary imports in my settings.py. Admin interface used to work ok). Then I gave a django-admin.py validate. Then the hell begun. django-admin.py validate gave me this error: Error: Settings cannot be imported, because environment variable DJANGO_SETTINGS_MODULE is undefined. I then gave a set DJANGO_SETTINGS_MODULE=myproject.settings and then again a django-admin.py validate This is what I get now: Error: Could not import settings 'myproject.settings' (Is it on sys.path? Does it have syntax errors?): No module named myproject.settings and now I am lost. I tried django console and sys.path.append('c:\workspace') or sys.append('c:\workspace\myproject') but still get the same errors. I use windows 7 and my project dir is c:\workspace. I don't use a PYTHONPATH variable (although I tried setting it temporarily to C:\workspace but I still get the same error). I don't use Apache, just the django development server. What am I doing wrong? My web page works fine. I think that the fact that I can't login as admin is related to the previous import error, no? PS: I also tried this: http://coderseye.com/2007/howto-reset-the-admin-password-in-django.html but still I couldn't change admin password for some reason. Although I could create another admin user (with which I couldn't login).

    Read the article

  • What is the best way to get an audio file duration in Android?

    - by Gilead
    Hi! I'm using a SoundPool [ 1 ] to play audio clips in my app. All is fine but I need to know when the clip playback has finished. At the moment I track it in my app by obtaining the duration of each clip using a MediaPlayer [ 2 ] instance. That works fine but it looks wasteful to load each file twice, just to get the duration. I could roughly calculate the duration myself knowing the length of the file (available from the AssetFileDescriptor [ 3 ]) but I'd still need to know the sample rate and the number of channels. I see two potential solutions to that problem: Figuring out when a clip has finished playing (doesn't seem to be possible with SoundClip). Having a class which could load just the header of an audio file and give me the sample rate/number of channels (and, ideally, the sample count to get the exact duration). Any suggestions? Thanks, Max The code I'm using at the moment (works fine but is rather heavy for the purpose): String[] fileNames = ... MediaPlayer mp = new MediaPlayer(); for (String fileName : fileNames) { AssetFileDescriptor d = context.getAssets().openFd(fileName); mp.reset(); mp.setDataSource(d.getFileDescriptor(), d.getStartOffset(), d.getLength()); mp.prepare(); int duration = mp.getDuration(); // ... } On a side note, this question has already been asked [ 4 ] but got no answers.

    Read the article

  • Item rendered via a DataTemplate with any Background Brush renders selection coloring behind item.

    - by Mike L
    I have a ListBox which uses a DataTemplate to render databound items. The XAML for the datatemplate is as follows: <DataTemplate x:Key="NameResultTemplate"> <WrapPanel x:Name="PersonResultWrapper" Margin="0" Orientation="Vertical" Background="{Binding Converter={StaticResource NameResultToColor}, Mode=OneWay}" > <i:Interaction.Triggers> <i:EventTrigger EventName="MouseDown"> <cmd:EventToCommand x:Name="SelectPersonEventCommand" Command="{Binding Search.SelectedPersonCommand, Mode=OneWay, Source={StaticResource Locator}}" CommandParameter="{Binding Mode=OneWay}" /> </i:EventTrigger> </i:Interaction.Triggers> <TextBlock x:Name="txtPersonName" TextWrapping="Wrap" Margin="0" VerticalAlignment="Top" Text="{Binding PersonName}" FontSize="24" Foreground="Black" /> <TextBlock x:Name="txtAgencyName" TextWrapping="Wrap" Text="{Binding AgencyName}" HorizontalAlignment="Left" VerticalAlignment="Bottom" Margin="0" FontStyle="Italic" Foreground="Black" /> <TextBlock x:Name="txtPIDORI" TextWrapping="Wrap" Text="{Binding PIDORI}" HorizontalAlignment="Left" VerticalAlignment="Bottom" Margin="0" FontStyle="Italic" Foreground="Black" /> <TextBlock x:Name="txtDescriptors" TextWrapping="Wrap" Text="{Binding DisplayDescriptors}" Margin="0" VerticalAlignment="Top" Foreground="Black"/> <Separator Margin="0" Width="400" /> </WrapPanel> </DataTemplate> Note that there is a value converter called NameResultToColor which changes the background brush of the rendered WrapPanel to gradient brush depending on certain scenarios. All of this works as I'd expect, except when you click on any of the rendered ListBox items. When you click one, there is only the slightest sign of the selection coloring (the default bluish color). I can see a trace bit of it underneath my gradient-brushed item. If I reset the background brush to "no brush" then the selection rendering works properly. If I set the background brush to a solid color, it also fails to render as I'd expect. How can I get the selection coloring to be on top? What is trumping the selection rendering?

    Read the article

  • A more elegant way to start a multithread alarm in Rebol VID ? (What's the equivalent of load event?

    - by Rebol Tutorial
    I want to trigger an alarm when the GUI starts. I can't see what's the equivalent of load event of other language in Rebol VID, so I put it in the periodic handler which is quite circumvoluted. So how to do this more cleanly ? alarm-data: none set-alarm: func [ "Set alarm for future time." seconds "Seconds from now to ring alarm." message [string! unset!] "Message to print on alarm." ] [ alarm-data: reduce [now/time + seconds message] ] ring: func [ "Action for when alarm comes due." message [string! unset!] ] [ set-face monitor either message [message]["RIIIING!"] ; Your sound playing can also go here (my computer doesn't have speakers). ] periodic: func [ "Called every second, checks alarms." fact action event ] [ either alarm-data [ ; Update alarm countdown. set-face monitor rejoin [ "Alarm will ring in " to integer! alarm-data/1 - now/time " seconds." ] ; Check alarm. if now/time > alarm-data/1 [ ring alarm-data/2 ;alarm-data: none ; Reset once fired. ] ][ either value? 'message [ set-alarm seconds message ][ set-alarm seconds "Alarm triggered!" ] ] ] alarm: func[seconds message [string! unset!]][ system/words/seconds: seconds if value? 'message [ system/words/message: message ] view layout [ monitor: text 256 "" rate 1 feel [engage: :periodic] button 256 "re/start countdown" [ either value? 'message [ set-alarm seconds message ][ set-alarm seconds "Alarm triggered!" ] set-face monitor "Alarm set." ] ] ]

    Read the article

  • SimpleModal can't bind event onShow

    - by Higgs Boson
    Hi All I can't seem to get this working, some help would be greatly appreciated. I have a page with the following code: $('.editname').click(function (e) { var src = "test.html"; $.modal('<iframe src="' + src + '" height="480" width="640" style="border:0">', { closeHTML:"<div class='no simplemodal-close'>Close</div>", containerCss:{ backgroundColor:"#fff", border:"10px solid #333", height:480, padding:"10px", width:640 }, opacity:50, overlayCss: {backgroundColor:"#fff"}, onShow: function (dialog) { $('.saveit', dialog.data[0]).click(function () { // close the dialog $.modal.close(); }); } }); }); The code for test.html (the contents of the modal window) is: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <title>Untitled Document</title> <link href="css/reset.css" rel="stylesheet" type="text/css" /> <link href="css/layout.css" rel="stylesheet" type="text/css" /> <link href="css/text.css" rel="stylesheet" type="text/css" /> </head> <body> <h1>Test</h1> <div class='pointer spacertop'><a href="#" class="saveit">Save</a></div> </body> </html> The modal window appears, however clicking on the Save button (class saveit) in the modal window does not fire the click function. It does nothing. Please help. Thank you in advance.

    Read the article

  • ASP.NET MVC View ReRenders Part of Itself

    - by Jason
    In all my years of .NET programming I have not run across a bug as weird as this one. I discovered the problem because some elements on the page were getting double-bound by jQuery. After some (ridiculous) debugging, I finally discovered that once the view is completely done rendering itself and all its children partial views, it goes back to an arbitrary yet consistent location and re-renders itself. I have been pulling my hair out about this for two days now and I simply cannot get it to render itself only once! For lack of any better debugging idea, I've painstakingly added logging tracers throughout the HTML just so I can pin down what may be causing this. For instance, this code ($log just logs to the console): ... <script type="text/javascript">var x = 0; $log('1');</script> <div id="new-ad-form"> <script type="text/javascript">x++;$log('1.5', x);</script> ... will yield ... <--- this happens before this snippet 1 1.5 1 ... 10 <--- bottom of my form, after snippet 1.5 2 <--- beginning of part that runs again! ... 9 <--- this happens after this snippet I've searched my codebase high and low, but there is NOTHING that says that it should re-render part of a page. I'm wondering if the jQueryUI has anything to do with it, as #new-ad-form is the container for a jQueryUI dialog box. If this is potentially the case, here's my init code for that: $('#new-ad-form').dialog({ autoOpen: false, modal: true, width: 470, title: 'Create A New Ad', position: ['center', 35], close: AdEditor.reset });

    Read the article

  • How do I find the object with the oldest updated_at column in RJS?

    - by user284194
    Hello, I'm trying to remove the object with the oldest updated_at value when the rjs is executed. page.insert_html :top, :messages, :partial => @message page[@message].visual_effect :grow page[:message_form].reset Message.old_messages.each do |m| page.remove(m.id) end page.delay(1) do page.select('.message').last.visual_effect :fade end I'm using .last in there right now, but I have a periodically_call_remote in the view that continually updates and runs the rjs above. The line: page.select('.message').last.visual_effect :fade seems to only execute the first time because after the message that is "last" fades away there's nothing recognized as "last" anymore so I figure instead of calling .last I could find the object that has the oldest updated_at time stamp and just remove that instead. I'm thinking that I probably cannot do this using page.select since it only calls on css elements. And therefore I probably don't have access to the updated_at values in the Message model. Does anyone have a suggestion on how to accomplish removing the oldest message with rjs? The messages are already automatically removed in the model as new messages are created. But I want them to fade automatically when the RJS refreshes the element.

    Read the article

  • Moving a large number of files in one directory to multiple directories

    - by Axsuul
    I am looking to create a Windows batch script to move about 2,000 files and splitting them up so that there are 10 files per folder. I have attempted creating a batch script but the syntax really boggles my mind. Here is what I have so far @echo off :: Config parameters set /a groupsize = 10 :: initial counter, everytime counter is 1, we create new folder set /a n = 1 :: folder counter set /a nf = 1 for %%f in (*.txt) do ( :: if counter is 1, create new folder if %n% == 1 ( md folder%nf% set /a n += 1 ) :: move file into folder mv -Y %%f folder%nf%\%%f :: reset counter if larger than group size if %n% == %groupsize% ( set /a n = 1 ) else ( set /a n += 1 ) ) pause Basically what this script does is loop through each .txt file in the directory. It creates a new directory in the beginning and moves 10 files into that directory, then creates a new folder again and moves another 10 files into that directory, and so on. However, I'm having problems where the n variable is not being incremented in the loop? I'm sure there's other errors too since the CMD window closes on me even with pause. Any help or guidance is appreciated, thanks for your time!

    Read the article

  • How do I exclude data from local table schema_migrations from being pushed to Heroku DB?

    - by Thierry Lam
    I was able to push my Ruby on Rails app with MySQL(local dev) to the Heroku server along with migrating my model with the command heroku rake db:migrate. I have also read the documentation on Database Import/Export. Is that doc referring to pushing actual data from my local dev DB to whichever Heroku's DB? Do I need to modify anything in the file database.yml to make it happen? I ran the following command: heroku db:push and I am getting the error: Sending data 2 tables, 3 records !!! Caught Server Exception | ETA: --:--:-- Taps Server Error: PGError ERROR: duplicate key value violates unique constraint "unique_schema_migrations" I have 2 tables, one I create for my app and the other schema_migrations. The total number of entries among the 2 tables is 3. I'm also printing the number of entries I have in the table I have created and it's showing 0. Any ideas what I might be missing or what I am doing wrong? EDIT: I figured out the above, Heroku's DB already have schema_migrations the moment I ran migrate. New question: Does anyone know how I can exclude data from a specific table from being pushed to Heroku DB. The table to exclude in this case will be schema_migrations. Not so good solution: I googled around and someone else was having the same issue. He suggested naming the schema_migrations table to zschema_migrations. In this way data from the other tables will be pushed properly until it fails on the last table. It's a pretty bad solution but will do for the time being. A better solution will be to use an existing Rails command which can reset a specific table from a database. I don't think Rake can do that.

    Read the article

  • Resetting a PChar variable

    - by scott-thornton
    Hi, I don't know much about delphi win 32 programming, but I hope someone can answer my question. I get duplicate l_sGetUniqueIdBuffer saved into the database which I want to avoid. The l_sGetUniqueIdBuffer is actually different ( the value of l_sAuthorisationContent is xml, and I can see a different value generated by the call to getUniqueId) between rows. This problem is intermittant ( duplicates are rare...) There is only milliseconds difference between the update date between the rows. Given: ( unnesseary code cut out) l_sGetUniqueIdBuffer: PChar; FOutputBufferSize : integer; FOutputBufferSize := 1024; while( not dmAccomClaim.ADOQuClaimIdentification.Eof ) do begin // Get a unique id for the request l_sGetUniqueIdBuffer := AllocMem (FOutputBufferSize); l_returnCode := getUniqueId (m_APISessionId^, l_sGetUniqueIdBuffer, FOutputBufferSize); dmAccomClaim.ADOQuAddContent.Active := False; dmAccomClaim.ADOQuAddContent.Parameters.ParamByName('pContent').Value := (WideString(l_sAuthorisationContent)); dmAccomClaim.ADOQuAddContent.Parameters.ParamByName('pClaimId').Value := dmAccomClaim.ADOQuClaimIdentification.FieldByName('SB_CLAIM_ID').AsString; dmAccomClaim.ADOQuAddContent.Parameters.ParamByName('pUniqueId').Value := string(l_sGetUniqueIdBuffer); dmAccomClaim.ADOQuAddContent.ExecSQL; FreeMem( l_sAuthorisationContent, l_iAuthoriseContentSize ); FreeMem( l_sGetUniqueIdBuffer, FOutputBufferSize ); end; I guess i need to know, is the value in l_sGetUniqueIdBuffer being reset for every row??

    Read the article

  • Debugging PHP Mail() and/or PHPMailer

    - by Agos
    Hi, I'm quite stuck with a problem sending mail from a PHP script. Some data: Shared hosting, no SSH access, only hosting provider panel PHP version 5.2.5 Last year I built a site which had no problems sending mail with the same hosting Let's say the domain is “domain.com” and my private address is “[email protected]” for anonimity's sake in the following code. Here's the code: <?php error_reporting(E_ALL); ini_set("display_errors", 1); $to = "[email protected]"; $subject = "Hi"; $body = "Test 1\nTest 2\nTest 3"; $headers = 'From: [email protected]' . "\r\n" . 'errors-to: [email protected]' . "\r\n" . 'X-Mailer: PHP/' . phpversion(); if (mail($to, $subject, $body, $headers)) { echo("Message successfully sent"); } else { echo("Message sending failed"); } require('class.phpmailer.php'); $message = "Hello world"; $mail = new PHPMailer(); $mail->CharSet = "UTF-8"; $mail->AddAddress("[email protected]", "Agos"); $mail->SetFrom("[email protected]","My Site"); $mail->Subject = "Test Message"; $mail->Body = $message; $mail->Send(); ?> And here is what I get: Message sending failed 'ai' = 'application/postscript', 'eps' = 'application/postscript', 'ps' = 'application/postscript', 'smi' = 'application/smil', 'smil' = 'application/smil', 'mif' = 'application/vnd.mif', 'xls' = 'application/vnd.ms-excel', 'ppt' = 'application/vnd.ms-powerpoint', 'wbxml' = 'application/vnd.wap.wbxml', 'wmlc' = 'application/vnd.wap.wmlc', 'dcr' = 'application/x-director', 'dir' = 'application/x-director', 'dxr' = 'application/x-director', 'dvi' = 'application/x-dvi', 'gtar' = 'application/x-gtar', 'php' = 'application/x-httpd-php', 'php4' = 'application/x-httpd-php', 'php3' = 'application/x-httpd-php', 'phtml' = 'application/x-httpd-php', 'phps' = 'application/x-httpd-php-source', 'js' = 'application/x-javascript', 'swf' = 'application/x-shockwave-flash', 'sit' = 'application/x-stuffit', 'tar' = 'application/x-tar', 'tgz' = 'application/x-tar', 'xhtml' = 'application/xhtml+xml', 'xht' = 'application/xhtml+xml', 'zip' = 'application/zip', 'mid' = 'audio/midi', 'midi' = 'audio/midi', 'mpga' = 'audio/mpeg', 'mp2' = 'audio/mpeg', 'mp3' = 'audio/mpeg', 'aif' = 'audio/x-aiff', 'aiff' = 'audio/x-aiff', 'aifc' = 'audio/x-aiff', 'ram' = 'audio/x-pn-realaudio', 'rm' = 'audio/x-pn-realaudio', 'rpm' = 'audio/x-pn-realaudio-plugin', 'ra' = 'audio/x-realaudio', 'rv' = 'video/vnd.rn-realvideo', 'wav' = 'audio/x-wav', 'bmp' = 'image/bmp', 'gif' = 'image/gif', 'jpeg' = 'image/jpeg', 'jpg' = 'image/jpeg', 'jpe' = 'image/jpeg', 'png' = 'image/png', 'tiff' = 'image/tiff', 'tif' = 'image/tiff', 'css' = 'text/css', 'html' = 'text/html', 'htm' = 'text/html', 'shtml' = 'text/html', 'txt' = 'text/plain', 'text' = 'text/plain', 'log' = 'text/plain', 'rtx' = 'text/richtext', 'rtf' = 'text/rtf', 'xml' = 'text/xml', 'xsl' = 'text/xml', 'mpeg' = 'video/mpeg', 'mpg' = 'video/mpeg', 'mpe' = 'video/mpeg', 'qt' = 'video/quicktime', 'mov' = 'video/quicktime', 'avi' = 'video/x-msvideo', 'movie' = 'video/x-sgi-movie', 'doc' = 'application/msword', 'word' = 'application/msword', 'xl' = 'application/excel', 'eml' = 'message/rfc822' ); return (!isset($mimes[strtolower($ext)])) ? 'application/octet-stream' : $mimes[strtolower($ext)]; } /** * Set (or reset) Class Objects (variables) * * Usage Example: * $page-set('X-Priority', '3'); * * @access public * @param string $name Parameter Name * @param mixed $value Parameter Value * NOTE: will not work with arrays, there are no arrays to set/reset * @todo Should this not be using __set() magic function? */ public function set($name, $value = '') { try { if (isset($this-$name) ) { $this-$name = $value; } else { throw new phpmailerException($this-Lang('variable_set') . $name, self::STOP_CRITICAL); } } catch (Exception $e) { $this-SetError($e-getMessage()); if ($e-getCode() == self::STOP_CRITICAL) { return false; } } return true; } /** * Strips newlines to prevent header injection. * @access public * @param string $str String * @return string */ public function SecureHeader($str) { $str = str_replace("\r", '', $str); $str = str_replace("\n", '', $str); return trim($str); } /** * Set the private key file and password to sign the message. * * @access public * @param string $key_filename Parameter File Name * @param string $key_pass Password for private key */ public function Sign($cert_filename, $key_filename, $key_pass) { $this-sign_cert_file = $cert_filename; $this-sign_key_file = $key_filename; $this-sign_key_pass = $key_pass; } /** * Set the private key file and password to sign the message. * * @access public * @param string $key_filename Parameter File Name * @param string $key_pass Password for private key */ public function DKIM_QP($txt) { $tmp=""; $line=""; for ($i=0;$i<= $ord) && ($ord <= 0x3A)) || $ord == 0x3C || ((0x3E <= $ord) && ($ord <= 0x7E)) ) { $line.=$txt[$i]; } else { $line.="=".sprintf("%02X",$ord); } } return $line; } /** * Generate DKIM signature * * @access public * @param string $s Header */ public function DKIM_Sign($s) { $privKeyStr = file_get_contents($this-DKIM_private); if ($this-DKIM_passphrase!='') { $privKey = openssl_pkey_get_private($privKeyStr,$this-DKIM_passphrase); } else { $privKey = $privKeyStr; } if (openssl_sign($s, $signature, $privKey)) { return base64_encode($signature); } } /** * Generate DKIM Canonicalization Header * * @access public * @param string $s Header */ public function DKIM_HeaderC($s) { $s=preg_replace("/\r\n\s+/"," ",$s); $lines=explode("\r\n",$s); foreach ($lines as $key=$line) { list($heading,$value)=explode(":",$line,2); $heading=strtolower($heading); $value=preg_replace("/\s+/"," ",$value) ; // Compress useless spaces $lines[$key]=$heading.":".trim($value) ; // Don't forget to remove WSP around the value } $s=implode("\r\n",$lines); return $s; } /** * Generate DKIM Canonicalization Body * * @access public * @param string $body Message Body */ public function DKIM_BodyC($body) { if ($body == '') return "\r\n"; // stabilize line endings $body=str_replace("\r\n","\n",$body); $body=str_replace("\n","\r\n",$body); // END stabilize line endings while (substr($body,strlen($body)-4,4) == "\r\n\r\n") { $body=substr($body,0,strlen($body)-2); } return $body; } /** * Create the DKIM header, body, as new header * * @access public * @param string $headers_line Header lines * @param string $subject Subject * @param string $body Body */ public function DKIM_Add($headers_line,$subject,$body) { $DKIMsignatureType = 'rsa-sha1'; // Signature & hash algorithms $DKIMcanonicalization = 'relaxed/simple'; // Canonicalization of header/body $DKIMquery = 'dns/txt'; // Query method $DKIMtime = time() ; // Signature Timestamp = seconds since 00:00:00 - Jan 1, 1970 (UTC time zone) $subject_header = "Subject: $subject"; $headers = explode("\r\n",$headers_line); foreach($headers as $header) { if (strpos($header,'From:') === 0) { $from_header=$header; } elseif (strpos($header,'To:') === 0) { $to_header=$header; } } $from = str_replace('|','=7C',$this-DKIM_QP($from_header)); $to = str_replace('|','=7C',$this-DKIM_QP($to_header)); $subject = str_replace('|','=7C',$this-DKIM_QP($subject_header)) ; // Copied header fields (dkim-quoted-printable $body = $this-DKIM_BodyC($body); $DKIMlen = strlen($body) ; // Length of body $DKIMb64 = base64_encode(pack("H*", sha1($body))) ; // Base64 of packed binary SHA-1 hash of body $ident = ($this-DKIM_identity == '')? '' : " i=" . $this-DKIM_identity . ";"; $dkimhdrs = "DKIM-Signature: v=1; a=" . $DKIMsignatureType . "; q=" . $DKIMquery . "; l=" . $DKIMlen . "; s=" . $this-DKIM_selector . ";\r\n". "\tt=" . $DKIMtime . "; c=" . $DKIMcanonicalization . ";\r\n". "\th=From:To:Subject;\r\n". "\td=" . $this-DKIM_domain . ";" . $ident . "\r\n". "\tz=$from\r\n". "\t|$to\r\n". "\t|$subject;\r\n". "\tbh=" . $DKIMb64 . ";\r\n". "\tb="; $toSign = $this-DKIM_HeaderC($from_header . "\r\n" . $to_header . "\r\n" . $subject_header . "\r\n" . $dkimhdrs); $signed = $this-DKIM_Sign($toSign); return "X-PHPMAILER-DKIM: phpmailer.worxware.com\r\n".$dkimhdrs.$signed."\r\n"; } protected function doCallback($isSent,$to,$cc,$bcc,$subject,$body) { if (!empty($this-action_function) && function_exists($this-action_function)) { $params = array($isSent,$to,$cc,$bcc,$subject,$body); call_user_func_array($this-action_function,$params); } } } class phpmailerException extends Exception { public function errorMessage() { $errorMsg = '' . $this-getMessage() . " \n"; return $errorMsg; } } ? Fatal error: Class 'PHPMailer' not found in /mailtest.php on line 20 Which is baffling to say the least. Is there anything I can do to get at least some more meaningful errors? Why is code from the class showing up in my file?

    Read the article

  • Auditing in Entity Framework.

    - by Gabriel Susai
    After going through Entity Framework I have a couple of questions on implementing auditing in Entity Framework. I want to store each column values that is created or updated to a different audit table. Rightnow I am calling SaveChanges(false) to save the records in the DB(still the changes in context is not reset). Then get the added | modified records and loop through the GetObjectStateEntries. But don't know how to get the values of the columns where their values are filled by stored proc. ie, createdate, modifieddate etc. Below is the sample code I am working on it. //Get the changed entires( ie, records) IEnumerable<ObjectStateEntry> changes = context.ObjectStateManager.GetObjectStateEntries(EntityState.Modified); //Iterate each ObjectStateEntry( for each record in the update/modified collection) foreach (ObjectStateEntry entry in changes) { //Iterate the columns in each record and get thier old and new value respectively foreach (var columnName in entry.GetModifiedProperties()) { string oldValue = entry.OriginalValues[columnName].ToString(); string newValue = entry.CurrentValues[columnName].ToString(); //Do Some Auditing by sending entityname, columnname, oldvalue, newvalue } } changes = context.ObjectStateManager.GetObjectStateEntries(EntityState.Added); foreach (ObjectStateEntry entry in changes) { if (entry.IsRelationship) continue; var columnNames = (from p in entry.EntitySet.ElementType.Members select p.Name).ToList(); foreach (var columnName in columnNames) { string newValue = entry.CurrentValues[columnName].ToString(); //Do Some Auditing by sending entityname, columnname, value } }

    Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >