Search Results

Search found 9235 results on 370 pages for 'social networking'.

Page 111/370 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

• Huawei b260a gsm modem not forwarding gre for pptp tunnel

  - by Priit

  I have a huawei gsm modem that does not want to let gre through. The goal is to connect into a pptp server thats behind the huawei. In the modems port forwarding settings theres a ready made profile for pptp (1723). After activating that the MS pptp test tools show that connection is being initiated but no gre packets make it to the server. After taking a closer look into the modems iptables rules theres nothing in there about gre. So I tried making gre rules manualy into forward and preroute chains without any success what so ever. As far as I can tell theres no ip_gre module present on the device is that needed for gre forwarding? Thats what I'm afraid of that it doesn't support gre in NAT but how would I turn it into a bridge? The wan interface is ppp0 so bridging it with eth0 would not work right? Is there some iptables rule I could use to make the modem let all the traffic just straight through?

  Read the article

• http, https and ftp is not working but smtp and imap is working

  - by Unicron

  hi all, yesterday on a computer of a friend a strange thing happened. after booting the ports fo http, https and ftp are closed but e-mail is still working. in the control panel the windows firewall seems active even if he tries to deactivate it. i have a suspision that it is the faul of norton internet security 2010, we have tried to uninstall it, but the uninstallation did not work. when using the removal tool from symantec it just goes to 23% and then it crashes. the process ccSvcHst.exe is still running. how can i safeley remove the rest of norton internet security? thanks in advance [edit] norton internet security 2010 is sucesfully removed, but still no connectivity

  Read the article

• No option to connect to wireless network

  - by Casebash

  I don't have any option to connect to wireless. It just doesn't appear in the taskbar at all - even the no wireless networks were found doesn't appear. In network connections, I only have the option of using a wired connection. According to device manager, I have a working VIA Rhine II Fast Ethernet Adapter (this device only appeared after I selected showing hidden devices). I have already attempted restarting the computer a few times. Does anyone have any suggestions?

  Read the article

• Prevent Network Printers Automatically being added to 'Devices and Printers' in Windows 7

  - by Ben

  I think my question is a duplicate of this one, but the original question was never properly answered (the steps described are for Windows XP). I am aware of the option to "Turn off Network Discovery" (under Control Panel All Control Panel Items Network and Sharing Center Advanced sharing settings); I set this option (for both Home/Work and Private) but it doesn't seem to stop the printers getting added, and has the side effect of preventing me from browsing the list of machines on the network (which I need). I've tried the Windows XP registry option - but it doesn't seem to make any difference: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\NoNetCrawling I find it annoying having the printer list cluttered with printers from all over the office which I am never going to use (especially since lots of them no longer physically exist, users just haven't deleted them from their machines). This must be a real problem for people in massive offices with large numbers of printers - but I can't seem to find a lot of people complaining about it - which makes me think I'm missing something obvious. I don't really want to hack the firewall or turn off sharing completely, I still want to select and use network printers and file shares. Any ideas?

  Read the article

• How to get Windows 7 to automatically connect to an ad-hoc network?

  - by George Edison

  I have two machines - one is running Ubuntu 12.04 64-bit and the other is running Windows 7 Starter Edition (32-bit). The Ubuntu machine is connected to the Internet via the eth0 interface. That machine also has a wireless network interface (wlan0) that is currently functioning as an ad-hoc network. I can connect to the ad-hoc network just fine with the Windows machine but each time I wish to do so, I must manually initiate the connection and enter the password. Is there some way to instruct Windows to automatically connect to this network (an option I have for standard wireless networks but not ad-hoc networks)?

  Read the article

• How do I send traffic to specific IP addresses through VPN and others directly to the internet?

  - by keithwarren7

  I am running Windows 7 and using the Cisco VPN adapter to connect to a private network where I access resources starting with the IP address 172.. My problem is that when connected to the VPN all external traffic is routed through the VPN. I want to set things up so only certain IP addresses go through the VPN and everything else goes out over the local adapter and out to the internet as normal. How?

  Read the article

• How to Set Linux Bonding Interface to Gigabit

  - by Kyle Brandt

  I have enabled Linux active backup mode bonding. Each interface is a gigabit interface, but the bond interface seems to end up at 100 Megabit: bonding: bond0: Warning: failed to get speed and duplex from eth1, assumed to be 100Mb/sec and Full. ... bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON ... bonding: bond0: backup interface eth1 is now up ethtool apparently can't provide info on bond: sudo ethtool bond0 Settings for bond0: No data available So does this mean I am operating at 100 or 1000 Megabit (My guess is 1000)? If it is only 100, what options in the ifcfg scripts or the modprobe bonding options do I need to sett to make it 1000?

  Read the article

• Detecting man-in-the-middle attacks?

  - by Ilari Kajaste

  There seem to be many possible ways to create man-in-the-middle attacks on public access points, by stealing the access point's local IP address with ARP spoofing. The possible attacks range from forging password request fields, to changing HTTPS connections to HTTP, and even the recently discovered possibilit of injecting malicious headers in the beginning of secure TLS connections. However, it seems to be claimed that these attacks are not very common. It would be interesting to see for myself. What ways are there to detect if such an attack is being attempted by someone on the network? I guess getting served a plain HTTP login page would be an obvious clue, and of course you could run Wireshark and keep reading all the interesting ARP traffic... But an automated solution would be a tiny bit more handy. Something that analyzes stuff on the background and alerts if an attack is detected on the network. It would be interesting to see for myself if these attack are actually going on somewhere.

  Read the article

• Bandwidth Control on our Internet Connection

  - by AlamedaDad

  Hi all, I have Covad dual/bonded T1 service in our office coming through a Cisco 1841 and then through a Sonicwall 3060Pro/Enhanced SW firewall. The problem I'm looking for some input on is how to limit the amount of bandwidth any single user/PC can user for downloading a file from the Internet. It's become an issue that when one person happens to download let's say an ~300MB file, normal internet access for the other employees slows to a crawl. I've seen through MRTG that in fact usage of the circuit jumps to the full 3mb for the duration of the download and then drops. Is it possible to control this? I'm not familiar with QOS or the like so I'm not sure. Any help on this would be appreciated. Thanks...Michael

  Read the article

• "Address already in use" error from socket bind, when ports are not being used

  - by Ivan Novick

  I can not bind (using C or python sockets) to any port in the range: 59969-60000 Using lsof, netstat and fuser I do not see any processes using these ports. Other ports such as 59900-59968 and 60001-60009 I can bind to them. My OS: is CentOS release 5.5 (Final) 2.6.18-194.3.1.el5 There must be something missing? Anyone have any idea how to debug why this port range is not usable? Cheers, Ivan

  Read the article

• New CAT5 cable run is unstable - bad jacks? Bad cable?

  - by BeemerGuy

  This is a little project I'm doing at home. I wanted to wire two rooms together (basically, the router is one room, and the switch is in the second room). So I ran a CAT5 between the two rooms, and wired an RJ45 jack in each room. I then hooked up the two jacks with two CAT5 cable to run it through the cable tester, and all 8 wires seem good. Now, when I connect the switch and the router, the connection is unstable -- I ping the router and it barely holds on for two pings before it disconnects, and stays in that unstable state. Just to make sure the router and the switch are ok, I connected them with long wire between the two rooms and the connection is absolutely stable, and pings continuously. What could be the cause for the unstable connection? Especially that it pings a few times, so there IS a connection. But why is it unstable? And how come the cable tester says it's ok, but it's unstable?

  Read the article

• Windows 7 can't connect to via ethernet to Airpot Extreme

  - by Mr AJL

  I have an Airport Extreme, and everything works beautifully on the Mac, but my Windows 7 computer, which is connected via a regular ethernet cable, can't see any network. The Windows computer says there's no cable connected. Any ideas? Is there some kind of setting you have to enable with the Airport utility? I looked everywhere but can't find anything. Or do I need to install that Airport utility something on the PC just to connect to the router? (Haven't tried because the PC has no CD drive)

  Read the article

• Archlinux/atheros WLAN configuration troubles

  - by GrinReaper

  I'm trying to config archlinux to use my wireless network adapter. It's quite troublesome. From what I've gathered, it's an atheros network adapter, using the ath5k driver/module... I can't get it to work; any ideas? Here's some of the output from my tinkering: # lspci | grep -i net 00:0a.0 Ethernet controller: nVidia corporation MCP67 Ethernet (reva2) 03:00.0 Ethernet controller: atheros communications inc. AR5001 Wireless Network Adapter (rev01) # lsusb ... Bus 004 Device 003: ID 03f0:17d Hewlett Packard Wireless (Bluetooth + WLAN Interface [Integrated Module] # ping -c 3 www.google.com ping: unknown host www.google.com #ping -c 3 8.8.8.8 ping: network is unreachable # lspci -v 03:00.0 Ethernet controller: atheros communications inc. AR5001 Wireless Network Adapter (rev01) ... Kernel driver in use: ath5k Kernel modules: ath5k # dmesg |grep ath5k registered as phy0 registered led device ath5k: atheros chip found PCI INT A disabled registered led device registered as phy1 # ip addr | sed '/^[0-9]/!d;s/: <.*$//' 1: lo 2: eth1 3: eth0 # ip link set <interface> up/down RNETLINK answers: Operation not possible due to RF-kill Also, is there a way to dump text from command-line to a text file so i can just copy pasta? Sorry, first time using a linux distro... EDIT: So I just tried this: I actually just did this twice. (I can't tell which setting is on/off for my wireless adapter. The lights are blue all the time now.) #rfkill list 0: hp-wifi: wireless lan softblocked: no hardblocked :yes 1: hp-bluetooth: bluetooth softblocked: no hardblocked :yes 3: phy1: wireless lan softblocked: no hardblocked :yes #rfkill list 0: hp-wifi: wireless lan softblocked: no hardblocked :no 1: hp-bluetooth: bluetooth softblocked: no hardblocked no 3: phy1: wireless lan softblocked: no hardblocked :yes 7: hci0: bluetooh 0: hp-wifi: wireless lan softblocked: no hardblocked :no I've dug around some other articles and it seems like ath5k is supposed to be preferable to madwifi, so should i be using madwifi? I'm 99% sure I disabled the hardblock (by turning it ON) but, as shown above, phy1 wireless lan is STILL hardblocked. What gives? Maybe I've made some more fundamental error in a basic config file? EDIT: I've fixed the hardblock. I've tried pinging www.google.com, but to no avail. I get: ping: unknown host www.google.com In the arch wiki: Edit /etc/hosts and add the same HOSTNAME you entered in /etc/rc.conf: 127.0.0.1 archlinux.domain.org localhost.localdomain localhost archlinux To my understanding, hostname is just a user-specified and based on preference(?) My /etc/rc.conf: HOSTNAME="gestalt" My /etc/hosts: 127.0.0.1 localhost.localdomain localhost gestalt but should it be the following? 120.0.0.1 localhost.domain.org localhost.localdomain localhost gestalt

  Read the article

• Linux does not communicate to Windows subinterface

  - by artaxerxe

  I set my NIC on Windows so that I have two interfaces: one (the first one) has IP 192.168.0.5 the other one has IP 10.10.10.1. On a Linux machine I set an interface to 10.10.10.2. On another Linux machine I set the interface to 10.10.10.3. And tried to ping those machines. Here is the result. Linux to Linux is ok. Windows to Linux also is ok. But Linux to Windows does not work. Can you help me on getting the communication between Linux and Windows? What should I do for this? I have to mention that those machines are connected through a switch. If you need any details, ask me please! Thanks in advance!

  Read the article

• Can I set up multiple accounts on DD-WRT? [closed]

  - by Greg Ros

  Possible Duplicate: Can I set up multiple accounts on DD-WRT? I want to set up multiple accounts on DD-WRT (accounts meaning, username-password pairs). Specifically, I want one to be used primarily for remote web management (though there is no reason to restrict the account to such). Is this possible? If so, how do I go about it? I'm running: Router Model TP-Link TL-WR1043ND Firmware Version DD-WRT v24-sp2 (08/07/10) std - build 14896

  Read the article

• Dlink DIR-615 suddenly stops working - Orange internet light

  - by zm15

  I unplugged my Dlink DIR-615 router last night from the wall due to a storm rolling in. I've done this countless times, no problem. However, when I went to plug it in and use the internet today, nothing. Check everything, cycled everything. Hard reset the router, nothing. The little globe on the front is red/orange, and it should be green. Windows gives me an error of a "DNS Issue", and the internet works when connected directly to the modem. How can I fix this issue? Why would it suddenly stop working?

  Read the article

• How do I apply multiple subnets to a server with one NIC?

  - by Cosban

  I am trying to route multiple IPs through one physical NIC on my dedicated server for use with Proxmox KVM VMs. I have a dedicated server which is currently running Debian 4.4.5-8 with 3 available ip addresses for use, which will be displayed as 176.xxx.xxx.196 (main), 176.xxx.xxx.198 (on same subnet as main) and 5.xxx.xxx.166 (different subnet). I am currently trying to route the third IP address with the dedi for use with a vps that I have set up using proxmox v2.x but am having a really, really hard time doing so. Virtual interfaces binding the additional IP addresses work as expected, ruling out external routing problems. The provider has given the following information for the IP addresses on the main subnet: gateway: 176.xxx.xxx.193 netmask: 255.255.255.224 broadcast: 176.xxx.xxx.223 As well as the following information for the IP address on the second subnet: gateway: 5.xxx.xxx.161 netmask: 255.255.255.248 broadcast: 5.xxx.xxx.167 Everything I've tried with /etc/network/interfaces has either not worked, or has rendered the network completely useless. This is the current state of the file, which has the secondary IP address working on the same subnet as well as IPv6 working, but not the second subnet. # Nativen IPv6 Schnittstelle iface eth0 inet6 manual # Bridge IPv4 Schnittstelle (176.xxx.xxx.193/27) auto vmbr0 iface vmbr0 inet static address 176.xxx.xxx.196 netmask 255.255.255.224 gateway 176.xxx.xxx.193 broadcast 176.xxx.xxx.223 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 176.xxx.xxx.198/27 dev vmbr0 auto vmbr1 iface vmbr1 inet static address 5.xxx.xxx.166 netmask 255.255.255.248 gateway 5.xxx.xxx.161 broadcast 5.xxx.xxx.167 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 5.xxx.xxx.166/27 dev vmbr1 # Bridge IPv6 Schnittstelle (Reichweite: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx::/64) iface vmbr0 inet6 static address xxxx:xxxx:xxxx:xxxx:xxxx:xxxx netmask 64 up ip -6 route add xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 up ip -6 route add default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0

  Read the article

• Linux: multiple network connections - 3G/4G / Wifi / LAN / etc; how can i set a preferred network connection to use?

  - by Alex

  I've been looking at how I can setup a laptop that has multiple network interfaces, but a problem exists if all the connections are active, i.e. 3G, WiFi and LAN are all connected, I would like it to default to LAN. I would like to set "weights" or "priority" to each connection, so that if the LAN is unplugged, it'll default to WiFi - if its in range and working, otherwise, it'll switch and use the 3G dongle; I've been looking around and I can see that the "metric" counter for route isn't being used for recent kernels. I thought that would be able to set the preferred gateway / connections - but according to the man page: man route: OUTPUT Metric The 'distance' to the target (usually counted in hops). It is not used by recent kernels, but may be needed by routing daemons. So I'm confused, are there any scripts / apps / anything that can detect active network connections, and by way of configuration, send my default gateway network traffic through that interface if its active / alive?

  Read the article

• second ip address on the same interface but on a different subnet

  - by fptstl

  Is it possible in CentOS 5.7 64bit to have a second IP address on one interface (eg. eth0) - alias interface configuration - in a different subnet? Here is the original config for eth0 more etc/sysconfig/network-scripts/ifcfg-eth0 # Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.91.255 HWADDR=00:1D:09:FE:DA:04 IPADDR=192.168.91.250 NETMASK=255.255.255.0 NETWORK=192.168.91.0 ONBOOT=yes And here is the config for eth0:0 more etc/sysconfig/network-scripts/ifcfg-eth0:0 # Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express DEVICE=eth0:0 BOOTPROTO=static BROADCAST=10.10.191.255 DNS1=10.10.15.161 DNS2=10.10.18.36 GATEWAY=10.10.191.254 HWADDR=00:1D:09:FE:DA:04 IPADDR=10.10.191.210 NETMASK=255.255.255.0 NETWORK=10.39.191.0 ONPARENT=yes How would the resolv.conf file should change since there are two different gateways? Any other change needed?

  Read the article

• Finding all domain names that resolve to the same ip?

  - by Janak

  Lately I've been tracking a spammer on craigslist. I recently discovered that he's added a new technique to his arsenal, he registered a whole bunch of domain names but they all resolve to the same ip address. Is there any way to take an ip address and get a list of all the domain names that resolve to that ip?

  Read the article

• How to skip pushing the default gateway via DHCP in OpenWRT?

  - by francadaval

  I have a router with OpenWRT that I want to resolve IP addressing with DHCP without setting a default gateway. I have added a DHCP-Option parameter with value 3,0.0.0.0 that is supposed to set the default gateway by DHCP. Instead, the router IP is defined as default gateway for DHCP connections. How can I set a null default gateway (0.0.0.0) for connections configuration by DHCP? As said in a comment: I want this router to service a VirtualBox network that doesn't set a default gateway via DHCP.

  Read the article

• Remote connection IP to use

  - by petwho

  I have two laptops that both run on ubuntu and installed ssh server and ssh client on them. One is usually on my desk at home and one I usually bring to my company. When I'm at home I can easily ssh to one from the other by typing this command (to login to the other laptop whose IP address is: 192.168.0.105) : ssh -p 22 [email protected] However, When I'm at my company, I try to type the same command and ofcourse it doesn't work. I understand that when at home I'm on LAN network, that my laptops actually using my ISP's address which differ from 192.168.0.107 asummed 203.113.131.1. So could you tell me what IP that ssh shoud use for my laptop (at work) to connet to my computer at home? Thank you.

  Read the article

• Event ID 8021 The browser was unable to retrieve a list of servers from the browser master

  - by Ash

  We have a LAN where workstations are randomly losing network connectivity for brief moments of time. The workstations can also take a long time to login to the domain. During our troubleshooting we have found an error log on a few Windows 7 workstations: Warning BROWSER 8021 The browser was unable to retrieve a list of servers from the browser master \\random-pc on the network \Device\NetBT_Tcpip_{BBABCDE9-D8A0-4399-93F2-492FE0848B12}. The data is the error code. What do these errors mean? What computers should have the Computer Browser service enabled, workstations and/or servers? The environment is a mix of Windows 7 & Windows XP workstations on a Windows Server SBS 2011 SP1 domain.

  Read the article

• How does IPv6 subnetting work and how does it differ from IPv4 subnetting?

  - by Michael Hampton

  This is a Canonical Question about IPv6 Subnetting. Related: How does IPv4 Subnetting Work? I know a lot about IPv4 Subnetting, and as I prepare to (deploy|work on) an IPv6 network I need to know how much of this knowledge is transferable and what I still need to learn. IPv6 seems at first glance to be much more complex than IPv4. So I would like to know: IPv6 is 128 bits, so why is /64 the smallest recommended subnet for hosts? Related to this: Why is it recommended to use /127 for point to point links between routers, and why was it recommended against in the past? Should I change existing router links to use /127? Why would virtual machines be provisioned with subnets smaller than /64? Are there other situations in which I would use a subnet smaller than /64? Can I map directly from IPv4 subnets to IPv6 subnets? My interfaces have several IPv6 addresses. Must the subnet be the same for all of them? Why do I sometimes see a % rather than a / in an IPv6 address and what does it mean? Am I wasting too many subnets? Aren't we just going to run out again? In what other major ways is IPv6 subnetting different from IPv4 subnetting?

  Read the article

• How do I accept all Networks with the same ssid with wicd?

  - by rubo77

  We have a Mesh network here in my town, where every node creates the same client wlan with the SSID "kiel.freifunk.net". In wicd I can connect to those networks, but I have to choose which of them. In network-manager it was more handy: there was shown only one network with that SSID and if I moved through the room with my laptop, it automatically connects to the nearest network with that SSID name (I think that's called "roaming") Is it possible to achieve this with wicd also?

  Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >