Search Results

Search found 9235 results on 370 pages for 'social networking'.

Page 112/370 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• Remote connection IP to use

  - by petwho

  I have two laptops that both run on ubuntu and installed ssh server and ssh client on them. One is usually on my desk at home and one I usually bring to my company. When I'm at home I can easily ssh to one from the other by typing this command (to login to the other laptop whose IP address is: 192.168.0.105) : ssh -p 22 [email protected] However, When I'm at my company, I try to type the same command and ofcourse it doesn't work. I understand that when at home I'm on LAN network, that my laptops actually using my ISP's address which differ from 192.168.0.107 asummed 203.113.131.1. So could you tell me what IP that ssh shoud use for my laptop (at work) to connet to my computer at home? Thank you.

  Read the article

• Archlinux/atheros WLAN configuration troubles

  - by GrinReaper

  I'm trying to config archlinux to use my wireless network adapter. It's quite troublesome. From what I've gathered, it's an atheros network adapter, using the ath5k driver/module... I can't get it to work; any ideas? Here's some of the output from my tinkering: # lspci | grep -i net 00:0a.0 Ethernet controller: nVidia corporation MCP67 Ethernet (reva2) 03:00.0 Ethernet controller: atheros communications inc. AR5001 Wireless Network Adapter (rev01) # lsusb ... Bus 004 Device 003: ID 03f0:17d Hewlett Packard Wireless (Bluetooth + WLAN Interface [Integrated Module] # ping -c 3 www.google.com ping: unknown host www.google.com #ping -c 3 8.8.8.8 ping: network is unreachable # lspci -v 03:00.0 Ethernet controller: atheros communications inc. AR5001 Wireless Network Adapter (rev01) ... Kernel driver in use: ath5k Kernel modules: ath5k # dmesg |grep ath5k registered as phy0 registered led device ath5k: atheros chip found PCI INT A disabled registered led device registered as phy1 # ip addr | sed '/^[0-9]/!d;s/: <.*$//' 1: lo 2: eth1 3: eth0 # ip link set <interface> up/down RNETLINK answers: Operation not possible due to RF-kill Also, is there a way to dump text from command-line to a text file so i can just copy pasta? Sorry, first time using a linux distro... EDIT: So I just tried this: I actually just did this twice. (I can't tell which setting is on/off for my wireless adapter. The lights are blue all the time now.) #rfkill list 0: hp-wifi: wireless lan softblocked: no hardblocked :yes 1: hp-bluetooth: bluetooth softblocked: no hardblocked :yes 3: phy1: wireless lan softblocked: no hardblocked :yes #rfkill list 0: hp-wifi: wireless lan softblocked: no hardblocked :no 1: hp-bluetooth: bluetooth softblocked: no hardblocked no 3: phy1: wireless lan softblocked: no hardblocked :yes 7: hci0: bluetooh 0: hp-wifi: wireless lan softblocked: no hardblocked :no I've dug around some other articles and it seems like ath5k is supposed to be preferable to madwifi, so should i be using madwifi? I'm 99% sure I disabled the hardblock (by turning it ON) but, as shown above, phy1 wireless lan is STILL hardblocked. What gives? Maybe I've made some more fundamental error in a basic config file? EDIT: I've fixed the hardblock. I've tried pinging www.google.com, but to no avail. I get: ping: unknown host www.google.com In the arch wiki: Edit /etc/hosts and add the same HOSTNAME you entered in /etc/rc.conf: 127.0.0.1 archlinux.domain.org localhost.localdomain localhost archlinux To my understanding, hostname is just a user-specified and based on preference(?) My /etc/rc.conf: HOSTNAME="gestalt" My /etc/hosts: 127.0.0.1 localhost.localdomain localhost gestalt but should it be the following? 120.0.0.1 localhost.domain.org localhost.localdomain localhost gestalt

  Read the article

• Linux does not communicate to Windows subinterface

  - by artaxerxe

  I set my NIC on Windows so that I have two interfaces: one (the first one) has IP 192.168.0.5 the other one has IP 10.10.10.1. On a Linux machine I set an interface to 10.10.10.2. On another Linux machine I set the interface to 10.10.10.3. And tried to ping those machines. Here is the result. Linux to Linux is ok. Windows to Linux also is ok. But Linux to Windows does not work. Can you help me on getting the communication between Linux and Windows? What should I do for this? I have to mention that those machines are connected through a switch. If you need any details, ask me please! Thanks in advance!

  Read the article

• How do I accept all Networks with the same ssid with wicd?

  - by rubo77

  We have a Mesh network here in my town, where every node creates the same client wlan with the SSID "kiel.freifunk.net". In wicd I can connect to those networks, but I have to choose which of them. In network-manager it was more handy: there was shown only one network with that SSID and if I moved through the room with my laptop, it automatically connects to the nearest network with that SSID name (I think that's called "roaming") Is it possible to achieve this with wicd also?

  Read the article

• Accessing A Shared Directory That Has An Account White List

  - by Xan

  I'm on a LAN here at work and I have my desktop sharing some of my project folders. I can access the computer via \\ComputerIP\, but I can't actually open any of the folders. Upon attempting, I get the error: Windowns cannot access \ComputerIP\ProjectFolder You do not have permission to access \ComputerIP\ProjectFolder. Contact your network administrator to request access. For more information about permissions, see Windows Help and Support Now, this is understood considering I've made it so that you had to utilize the "Project" credentials to connect. I have a user account on my main computer hosting these shared folders that gives full access to the folders if you are this "Project" user. I can Remote Desktop the computer just fine from my laptop using either set of credentials. When I try to open these folders it doesn't give me the option to attempt to apply any credentials like it does when I remote desktop. How am I supposed to gain access to these folders?

  Read the article

• How to configure a wireless router to point to a remote www proxy

  - by Mark

  I have a LG smart Tv with browser. I need the tv browser to connect to a uk based proxy server on port 808. Unfortunately there is no option within tv to setup proxy for its browser. Now the Tv connects via a wireless connection to the internet. IE: TV <- D-Link DIR-605L <- ADSL <- WWW. Is it possible to setup this wireless router to connect the TV to the Proxy ?? If so ? where ? and what setings do i need to change in the wireless router ?? In short my question is ? How do i get the wireless router to make up for the lack of proxy connectivity within my Tv browser ?? Thanks in advance NB: I have configured my Pc's browser's proxy settings, and streaming via the proxy works 100%

  Read the article

• How does IPv6 subnetting work and how does it differ from IPv4 subnetting?

  - by Michael Hampton

  This is a Canonical Question about IPv6 Subnetting. Related: How does IPv4 Subnetting Work? I know a lot about IPv4 Subnetting, and as I prepare to (deploy|work on) an IPv6 network I need to know how much of this knowledge is transferable and what I still need to learn. IPv6 seems at first glance to be much more complex than IPv4. So I would like to know: IPv6 is 128 bits, so why is /64 the smallest recommended subnet for hosts? Related to this: Why is it recommended to use /127 for point to point links between routers, and why was it recommended against in the past? Should I change existing router links to use /127? Why would virtual machines be provisioned with subnets smaller than /64? Are there other situations in which I would use a subnet smaller than /64? Can I map directly from IPv4 subnets to IPv6 subnets? My interfaces have several IPv6 addresses. Must the subnet be the same for all of them? Why do I sometimes see a % rather than a / in an IPv6 address and what does it mean? Am I wasting too many subnets? Aren't we just going to run out again? In what other major ways is IPv6 subnetting different from IPv4 subnetting?

  Read the article

• Diagnosing and debugging LAN congestion / connection issues

  - by John Weldon

  What are the top N tools / methodologies used to diagnose and repair network issues? Given a LAN, for example, where users are able to consistently ping an outside server, but any data intensive connections are flaky; how would you begin solving the network issues? I imagine issues like congestion, bandwidth constraints, throughput constraints, etc. are all factors, but I don't know how to diagnose those issues. I'm especially interested in LAN environments (rather than WAN)

  Read the article

• Troubleshooting an unstable internet connection

  - by Konrad Rudolph

  My MacBook Pro running OS X (10.9, but I had the same problem before) is connected to a Belkin router via WiFi and, using Virgin Media as the ISP, to the internet. The connection is extremely unstable – on some days, I get a ping timeout every few seconds. In addition, some domains seem to suffer general connectivity issues. For instance, I often find that while the youtube.com website loads, none of the videos (which are hosted on a separate domain) do. At other times, videos load but always fail to buffer, even though the actual connection speed is ok, even though I’ve disabled dash playback. Since I’m living in a rented room and the ISP contract isn’t actually mine I’ve got only limited possibilities of addressing the problem. In particular, I have no access to the router configuration and my non tech savvy landlady, while sympathetic, is not in a great hurry to hand the problem over to the ISP’s customer support. What’s more, I seem to be the only person in the house experiencing these problems – but I can imagine that this is simply because I’m the only one who’s using the internet continuously. I’m searching for specific tests that might be able to pinpoint – and ideally solve – the problem. So far all I’ve managed to do is establish that Virgin is routing my traffic in mysterious ways. Here’s an excerpt from traceroute google.co.uk. It’s worth mentioning that the host name doesn’t seem to matter a lot, the trace route is always the same. traceroute: Warning: google.co.uk has multiple addresses; using 62.254.36.148 traceroute to google.co.uk (62.254.36.148), 64 hops max, 52 byte packets 1 (192.168.2.1) 1.112 ms 1.300 ms 2.359 ms 2 10.100.32.1 (10.100.32.1) 11.926 ms 10.217 ms 24.987 ms 3 cmbg-core-1a-ae3-610.network.virginmedia.net (80.1.202.93) 28.809 ms * 66.653 ms 4 popl-bb-1b-ae16-0.network.virginmedia.net (212.43.163.141) 13.759 ms 126.504 ms 20.472 ms 5 nrth-bb-1b-et-010-0.network.virginmedia.net (62.253.175.57) 28.357 ms 16.398 ms 42.387 ms 6 nrth-bb-1c-ae1-0.network.virginmedia.net (62.253.174.110) 27.441 ms 15.622 ms 12.044 ms 7 lutn-icdn-1-ae0-0.network.virginmedia.net (62.253.175.82) 16.678 ms 28.463 ms 28.253 ms 8 * * * 9 * * * 10 * * * ^C If I let it, this goes on until the end of time. It never seems to reach a destination. Is this normal? A friend living in the same town who is also with Virgin Media has a more conventional traceroute output: 7 hops to google.co.uk, all of which send the ICMP TIME_EXCEEDED response. The obvious fix – rebooting the router – doesn’t seem to help. As far as I can tell, the WiFi connection is stable (I can always ping the router) so the problem is further downstream. I’ve tried using an alternative DNS before (OpenDNS) but if anything, this made things worse. In fact, it made all Google services nigh unreachable.

  Read the article

• Configuring vlans on Cisco SG200 series switch with Ubuntu server

  - by nixnotwin

  I created a vlan on Ubuntu with vconfig tool with 21 as id and eth1 as the host port. I connected eth1 to one of the ports on the swtich (GE23) as all ports trunk by default. In the webgui I created a vlan named test with the id 21 and I made GE2 are port as an access port. In port to vlan mapping I selected vlan 21 and added it port GE2 by selecting untagged option. I have assigned 192.168.1.1/24 as the ip of eth1.21 on Ubuntu. If I connect another cleint pc to GE2 port with a ip of 192.168.1.2/24 I cannot ping the server ip (192.168.1.1/24). Ping from server to client also does not work. I inspected packets that are sent out eth1 on the server and I could see the vlan 21 tag. And I connect the other end of the cable to a different Linux pc and inspected the packets but no vlan tags can be seen. What could be preventing me from getting vlans working? Edit 1 screenshots:

  Read the article

• Split horizon, route filtering, and having RIPv2 announce a non-attached route to host...

  - by Paul

  Routers A, B & C live at 10.1.1.1, 10.1.1.2 and 10.1.1.3 on a /24 metro Ethernet subnet. Each router also has its own private subnet on another interface. Router B's private subnet links thru a firewall to a 10.20.20.0 network at another organization. Router B redistributes to A and C several static routes for hosts on 10.20.20.0. However, a new host 10.20.20.5/32 must be reached via a different path that goes through router C. I know that C can advertise this host-based route with no problem, but I'd like to keep all my 10.20.20.x static routes in one place. So, how can B tell A via RIPv2 to send packets for 10.20.20.5/32 to C? So far it looks like I need no ip split-horizon on router B's 10.1.1.2 interface, perhaps because B has already learned from C other routes with a next hop of 10.1.1.3. But how does RIPv2 split horizon with no auto-summary and network 10.0.0.0 really work? If B learns a route to ANY 10.x.x.x network or host from A or C, is that enough for split horizon to keep it from redistributing ip route 10.20.20.5 255.255.255.255 10.1.1.3? And if I want to suspend split horizon only for this one new host, how do I filter out the mess of regurgitated routes that B advertises when I try no ip split-horizon? Thanks much.

  Read the article

• Having trouble setting up my router

  - by indyK1ng

  I just moved into my apartment and the Internet connection is working. It's Comcast in case that matters. Anyway, I'm having trouble setting up my wireless router (Netgear WNR2000) to work with it. Are there any settings that I could be missing? I currently have it set up to use a static IP address and I found the DNS servers I'm supposed to use and the Internet light is green, but I can't get out to the Internet. When I am trying, I'm connecting to an Ethernet port on the back of my router. Is there a setting I'm missing or a setting that I have set wrong? I used the automatic set up wizard to learn that it's a static IP address. Any help would be appreciated. I am currently only able to use my Linux machine, so please make any help in Linux commands. Yes, I can connect to the Internet if I connect to the modem directly and I've been using the web interface when I'm connected to the router, so I suppose I can ping the router. My router detected the connection as using a static IP address, so I connected to the modem directly and figured out what my IP address, gateway, and mask were as well as DNS servers.

  Read the article

• Terminating multi-mode fiber

  - by murisonc

  I'm looking at the feasibility of terminating multi-mode fiber connections ourselves. We would be using LC connectors. I've done some research and found two different methods. One requires polishing the ends and using epoxy while the other doesn't. I like the idea of not having to polish the ends but there doesn't seem to be much information on quality or ease of use. I've found two vendors (3M and Corning) that offer kits for terminating fiber without polishing or using epoxy. Does anyone have any experience with both methods that can offer some advice? Copper is easy but fiber seems to be a whole different animal. EDIT: After looking into fusion splicing suggested in the answer I've determined it's not for us. It's my understanding that is primarily used for outside plant and is better suited for single mode fiber. It's a good answer but doesn't address the question directly. Some more information about our situation. We will only be terminating multi-mode fiber inside a building and only doing between 4 and 20 pair a year. Hiring an outside person won't work due to our location. There are currently a couple people on-site that can terminate fiber (working for another company and charging large fees) but they can only do ST and SC connectors and we only use LC. So once again does anyone have experience with terminating using both epoxy type connectors and the other type (similar to Corning Unicam)?

  Read the article

• Rapidly changing public IP addresses on certain networks?

  - by zenblender

  I run/develop an online game where many of our users are in southeast asia. I recently went to southeast asia and made an alarming discovery. Anywhere I got internet access, whether it was via 3G, a LAN in a hotel, or wifi in a cafe, both in Singapore and the Philippines, I noticed that my IP address was changing CONSTANTLY. I mean the public IP address, not the private one. I could load a page like whatismyip.com and just hit reload and see a new IP address show up every 5-10 seconds! This has lots of consequences for my online game, as many things "break" if the IP address changes for a given user. Basically, I would like to know more about this. Is there a name for the kind of network or router or paradigm that causes this, so I can read up on it? I don't understand WHY a network would function this way. Does it do this on purpose? Is it for security reasons? Is it to anonymize and protect the identity of the users? Or is it just an "old" method that is mostly obsolete in the rest of the world? Thanks for any info that will help me to understand.

  Read the article

• Mysterious login attempts to windows server

  - by Jim Balo

  I have a Windows 2008R2 server that is reporting failed login attempts from a number of workstations on our network. Some event log details: Event ID 4625, Status: 0xc000006d, Sub Status: 0xc0000064 Security ID: NULL SID, Account Name: joedoe, Account Domain: Acme Workstation Name: WINXP1, Source Network Address: 192.168.1.23, Source Port: 1904 Logon Process: NtLmSsp, Authentication Package: NTLM, Logon Type: 3 (network) I believe this is coming from some netbios service or similar (maybe the file explorer), keeping an inventory of its network neighborhood and also trying to authenticate. Is there a way to turn this off without having to turn off file sharing all together? In other words, clients authenticating against file servers that they use is of course no problem, but I want to eliminate clients trying to authenticate to servers that they are not using and have no business with. The above example is only one of thousands of log alerts for similar failed network authentications. What can I do to clean this up / handle this? Thanks.

  Read the article

• Latency in Sending and Receiving Files From Amazon EC2 - Justification

  - by Adroidist

  I am facing a huge delay while uploading and downloading files from my Windows Amazon EC2 server to my android device. It takes around 50 seconds to upload then download 500 Kbytes image. My location is in asia and the server is is US-East. I pinged the server from my android and obtained values around 500 ms for RTT. Is this normal? How is this explained? I tried this website: http://cloudharmony.com/speedtest/run and obtained that downloading 270 Kbytes file takes around 20 seconds. How is this delay justified?

  Read the article

• How to route HyperV VMs traffic through host VPN

  - by Random

  I'm using Windows 8.1 Pro with HyperV. I have several VMs for development, all of them connected with host via Internal adapter using network addresses: 192.168.10.0/24 Where: 192.168.10.1 is my host's Hyper-V internal NIC address. When I'm not in my office I use 3G usb dongle an dialup VPN connection. I would like to route traffic from all existing and future VMs through the VPN. In best scenario traffic would be routed only partially to the local company network addresses 10.1.1.0/24 I don't want to use sharing because I'm switching between WiFi, USB 3G dongle and VPN. Moving to other virtualization is also not an option for me.

  Read the article

• Using VLANs that are routed together?

  - by dannymcc

  I have a quick question that's bugging me the more I read about VLANs. So far I understand that they are useful for dividing the network into sub-sections, but if you route them together does that not remove any security benefit? As an example, if I created a VLAN on my home network which was simply one computer, one server and one router.if I wanted to divide the network between computers and servers I could put the computer on VLAN 10 and the server on VLAN 20. Then the computer would no longer be able to communicate with the server - unless I added a static route to the router that connected the two together, basically telling VLAN 10 that VLAN 20 exists and how to communicate with it. The VLANs would then be connected in a similar way to a 'flat' network that has no VLANs. Therefore, surely, all security benefits are lost. Am I missing something?

  Read the article

• Slower wireless speed in Ubuntu 12.04 (64-bit) on Asus USB-N13

  - by PhantonTurtle

  I have an Asus USB-N13 which I use for wireless internet on my desktop. The download speed I get on Windows 7 (dual-boot) is 15.22 Mbps. On Ubuntu 12.04 (64-bit) I can only get 1.09 Mbps. I asked a question about this on the Ubuntu forums as well, but I did not get an answer. Here is the output from lsmod | grep rt which gives me, parport_pc 32866 0 rtl8192cu 103297 0 rtl8192c_common 75767 1 rtl8192cu rtlwifi 111202 1 rtl8192cu mac80211 506816 3 rtl8192cu,rtl8192c_common,rtlwifi cfg80211 205544 2 rtlwifi,mac80211 parport 46562 3 parport_pc,ppdev,lp I installed the drivers from Realtek (my chipset is Realtek, not Ralink) but that did not work.

  Read the article

• Windows 7 Forbid connecting to a specific wireless network

  - by Elliot

  Does anyone know how to tell windows 7 to bar a wireless network? It keeps logging into a random open one with no bandwidth my neighbors have instead of the good one we have here. I keep unchecking "automatically log in if available" and it keeps re-checking itself. I want it to NEVER log into this network no matter what without manual intervention. I do not want to disable auto connecting, just tell it "do not ever connect to this one without my express permission".

  Read the article

• How should one manager external and internal DNS servers at the same time?

  - by erotsppa

  We run a mac network here in the office. We have an internal DNS server to manage the network. Everything is resolved to a local ip (for mail.mydomain.com etc). However, we also have an external DNS server for when our users are not in the office. However, isn't it a pain to have to manage two lists? Whenever you change something you have to change another? And you can't have one be a slave of another because the ip are sometimes different (for example mail.mydomain.com would point to a local ip in local dns server but an external ip in the external dns server). Any tricks?

  Read the article

• Moving Portable Office. Have a LAN & Phone line query?

  - by John Smith

  We are about to move a portable office that has 8 phones and 12 lan connections. They are all wired back to our main switch and Nortel bcm200 phone system which are only about 20m (65ft) away. After the move the office will be 180m (600ft) away from these. What is the maximum length of cable a digital phone line can be? I am aware that a lan connection can only be 100m (305ft) when using cat5e utp. Does this rule apply to phone connections also? If so how can I extend beyond 100m for the phones? I was going to install about three cabinets, 3 switches and 6 patch panels for the lan connections but the ideal struck me tonight that maybe I could run a fibre optic line. Would this be feasible? Any feedback on this is greatly appreciated. Thanks

  Read the article

• VPN to Buffalo WHR-HP-G300N produces a Connection Error 807

  - by Darius

  My friend has modem/router from Clear and I have sent him Buffalo router to put it between his Clear device and the Network. I walked him thru establishing VPN in DD-WRT but when I try to VPN I get a VPN Connection Error 807. I am out of ideas how to solve this. Any suggestion? Clear Modem WAN: xx.xx.xx.xx Clearn Modem NAT's to: 192.168.15.XXX Clear Modem DHCP: 192.168.15.2 - 192.168.15.2 (range is limited to that of ONE ip address) Clear Modem DMZ: 192.168.15.2 the LAN of the clear modem is 192.168.15.XXX The DD-WRT IP: 192.168.4.1 Port FWD: 1723 to 192.168.4.1 PPTP server listens on 192.168.4.1 Where is the problem with this setup?

  Read the article

• Remotely turn on a device that is powered off?

  - by njboot

  Verbatim from the interview between Brian Williams and Edward Snowden last night: Snowden: Any intelligence service in the world that has significant funding and a real technological research team can own that phone [refering to Williams' iPhone] as soon as it connects to a network; it can be theirs. Williams: Can anyone turn it on remotely if it's off? Snowden: They can absolutely turn it on with the power turned off on the device. I concede Snowden's first point, fine. But the last? Does Snowden's last claim, that a powered off mobile device can be remotely turned, have any merit? It seems highly improbable and seemingly impossible.

  Read the article

• Linux Media Player

  - by Bupesh

  I have a SYABAS-based NAS Multimedia Server, which is connected via LAN to a PC running embedded Linux. I can get a list of content on the NAS device, but when I press play, it does not play, but displays the text path of the media file itself. In short it does not play streamed content, whereas the same content I am able to play using Windows based Internet Explorer. I meed a media player to work with embedded linux....

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >