Search Results

Search found 4462 results on 179 pages for 'ssh'.

Page 111/179 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

  • Multiple routers, subnets, gateways etc

    - by allentown
    My current setup is: Cable modem dishes out 13 static IP's (/28), a GB switch is plugged into the cable modem, and has access to those 13 static IP's, I have about 6 "servers" in use right now. The cable modem is also a firewall, DHCP server, and 3 port 10/100 switch. I am using it as a firewall, but not currently as a DHCP server. I have plugged into the cable modem, two network cables, one which goes to the WAN port of a Linksys Dual Band Wireless 10/100/1000 router/switch. Into the linksys are a few workstations, a few printers, and some laptops connecting to wifi. I set the Linksys to use take static IP, and enabled DHCP for the workstations, printers, etc in 192.168.1.1/24. The network for the Linksys is mostly self contained, backups go to a SAN, on that network, it all happens through that switch, over GB. But I also get internet access from it as well via the cable modem using one static IP. This all works, however, I can not "see" the static IP machines when I am on the Linksys. I can get to them via ssh and other protocols, and if I want to from "outside", I open holes, like 80, 25, 587, 143, 22, etc. The second wire, from the cable modem/fireall/switch just uplinks to the managed GB switch. What are the pros and cons of this? I do not like giving up the static IP to the Linksys. I basically have a mixed network of public servers, and internal workstations. I want the public servers on public IP's because I do not want to mess with port forwarding and mappings. Is it correct also, that if someone breaches the Linksys wifi, they still would have a hard time getting to the static IP range, just by nature of the network topology? Today, just for a test, I toggled on the DHCP in the firewall/cable modem at 10.1.10.1/24 range, the Linksys is n the 192.168.1.100/24 range. At that point, all the static IP machines still had in and out access, but Linksys was unreachable. The cable modem only has 10/100 ports, so I will not plug anything but the network drop into it, which is 50Mb/10Mb. Which makes me think this could be less than ideal, as transfers from the workstation network to the server network will be bottlenecked at 100Mb when I have 1000Mb available. I may not need to solve that, if isolation is better though. I do not move a lot of data, if any, from Linsys network to server network, so for it to pretend to be remote is ok. Should I approach this any different? I could enable DHCP on the cable modem/firewall, it should still send out the statics to the GB switch, but will also be a DHCP in 10.1.10.1/24 range? I can then plug the Linksys into the GB switch, which is now picking up statics and the 10.1.10.1/24 ranges, tell the Linksys to use 10.1.10.5 or so. Now, do I disable DHCP on the Linksys, and the cable modem/firewall will pass through the statics and 10.0.10.1/24 ranges as well? Or, could I open a second DHCP pool on the Linksys? I guess doing so gives me network isolation again, but it is just the reverse of what I have now. But I get out of the bottleneck, not that the Linksys could ever really touch real GB speeds anyway, but the managed switch certainly can. This is all because 13 statics are not that many. Right now, 6 "servers", the Linksys, a managed switch, a few SSL certs, and I am running out. I do not want to waste a static IP on the managed GB switch, or the Linksys, unless it provides me some type of benefit. Final question, under my current setup, if I am on a workstation, sitting at 192.168.1.109, the Linksys, with GB, and I send a file over ssh to the static IP machine, is that literally leaving the internet, and coming back in, or does it stay local? To me it seems like: Workstation (192.168.1.109) -> Linksys DHCP -> Linksys Static IP -> Cable Modem -> Server ( and it hits the 10/100 ports on the cable modem, slowing me down. But does it round trip the network, leave and come back in, limiting me to the 50/10 internet speeds? *These are all made up numbers, I do not use default router IP's as I will one day add a VPN, and do not want collisions. I need some recommendations, do I want one big network, or two isolated ones. Printers these days need an IP, everything does, I can not get autoconf/bonjour to be reliable on most printers. but I am also not sure I want the "server" side of my operation to be polluted by the workstation side of my operation. Unless there is some magic subetting I have not learned yet, here is what I am thinking: Cable modem 10/100, has 13 static IP, publicly accessible -> Enable DHCP on the cable modem -> Cable modem plugs into managed switch -> Managed switch gets 10.1.10.1 ssh, telnet, https admin management address -> Managed switch sends static IP's to to servers -> Plug Linksys into managed switch, giving it 10.1.10.2 static internally in Linksys admin -> Linksys gets assigned 10.1.10.x as its DHCP sending range -> Local printers, workstations, iPhones etc, connect to this -> ( Do I enable DHCP or disable it on the Linksys, just define a non over lapping range, or create an entirely new DHCP at 10.1.50.0/24, I think I am back isolated again with that method too? ) Thank you for any suggestions. This is the first time I have had to deal with less than a /24, and most are larger than that, but it is just a drop to a cabinet. Otherwise, it's a router, a few repeaters, and soho stuff that is simple, with one IP. I know a few may suggest going all DHCP on the servers, and I may one day, just not now, there has been too much moving of gear for me to be interested in that, and I would want something in the Catalyst series to deal with that.

    Read the article

  • Convert KVM virtual machine to LXC container

    - by linkdd
    I have 2 virtual machines (with Debian, using KVM) with virtual hard drives: /srv/kvm/ssh.img /srv/kvm/www.img Both have 3 partitions (/, /home, swap). I want to convert them in a RootFS usable with LXC (in order to use LXC instead of KVM). The only solution I have for the moment is: create a new RootFS copy /home partition into it reproduce the same configuration into it But is there an automated way to do it

    Read the article

  • Bad idea to keep htop running?

    - by Michael T. Smith
    I'm now monitoring multiple servers (3) and in the coming weeks that'll increase (towards 5 or 6). I've been keeping three terminal windows open running htop via SSH and I'm now wondering if there are any downsides to having a connection constantly open to production servers?

    Read the article

  • Automatically start VNC server on startup

    - by Vasu
    I installed the Ubuntu desktop on a Ubuntu 9.10 VPS server and am able to connect to the server using TightVNC. However, the VNC server on this VPS can only be started by logging in through SSH and typing the following command: vncserver :1 -geometry 800x600 -depth 16 -pixelformat rgb565 If I run this command on startup or as a schedule task, it won't start. What are my options? Thanks

    Read the article

  • Hang while starting several daemons [solved]

    - by Adrian Lang
    I’m running a Debian Squeeze AMD64 server. Target runlevel after boot is runlevel 2, which includes rsyslogd, cron, sshd and some other stuff, but not dovecot, postfix, apache2, etc. The system fails to reach runlevel 2 with several symptoms: The system hangs at trying to start rsyslogd Booting into runlevel 1 works, then login from the console works Starting rsyslogd from runlevel 1 via /etc/init.d/rsyslog hangs Starting runlevel 2 with rsyslogd disabled works But then, logging in via console fails: I get the motd, and then nothing Starting sshd from runlevel 1 succeeds But then, I cannot login via ssh. Sometimes password ssh login gives me the motd and then nothing, sometimes not even this. Trying to offer a public key seems to annoy the sshd enough to not talk to me any further. When rebooting from runlevel 1, the server hangs at trying to stop apache2 (which is not running, so this really should be trivial). Trying to stop apache2 when logged in in runleve 1 does hang as well. And that’s just the stuff which fails all the time. RAM has been tested, dmesg shows no problems. I have no clue. Update: (shortened) output from rsyslogd -c4 -d called in runlevel 1 rsyslogd 4.6.4 startup, compatibility mode 4, module path '' caller requested object 'net', not found (iRet -3003) Requested to load module 'lmnet' loading module '/user/lib/rsyslog/lmnet.so' module of type 2 being loaded conf.c requested ref for 'lmnet', refcount 1 rsylog runtime initialized, version 4.6.4, current users 1 syslogd.c requested ref for 'lmnet', refcount now 2 I can kill rsyslogd with Strg+C, then. /var/log shows none of the configured log files, though. Update2: Thanks to @DerfK I still have no clue, but at least I narrowed down the problem. I’m now testing with /etc/init.d/apache2 stop (without an apache2 running, of course) which hangs as well and looks like an even more obvious failure. After some testing I found out that a file with one single line: /usr/sbin/apache2ctl configtest /dev/null 2&1 hangs, while the same line executed in an interactive shell works. I was not able to further reduce this line while, i. e. every single part, the stream redirections and the commando itself is necessary to reproduce the hang. @DerfK also pointed me to strace which gave a shallow hint about what kind of hang we have here: wait4(-1for the init scripts futex(0xsomepointer, FUTEX_WAIT_PRIVATE, 2, NULL for rsyslogd / apache2 binaries called by the init scripts The system was installed as a Debian Lenny by my hoster in autumn 2011, I upgraded it to Squeeze immediately and kept it up to date with Squeeze, which then used to be testing. There were no big changes, though. I guess I never tried to reboot the system before. Update3: I found the problem. My /etc/nsswitch.conf specified ldap as hosts lookup backup, which is not available at that time of the boot. Relying on dns solely fixes my boot problems.

    Read the article

  • Load Balancer sftp persistence when a server goes offline

    - by Cobra Kai Dojo
    Let's say we have the following scenario: We have two identical *nix servers using a shared filesystem. We connect through SFTP (not FTPS) to one of them to upload a file to the shared filesystem, the server goes offline and we get redirected to the second system which is still available. My question is, would there be any connection persistence or the user will have to relogin? I guess a relogin would be needed because the ssh sessions are not shared between the two systems... Thanks in advance :)

    Read the article

  • Virtualbox: prevent a virtual machine to go down after I log out from the consolle I lanched the VM from

    - by Daniele
    I login remotely to a machine with Virtualbox installed by launching: ssh -Y root@virtualbox After that, I launch a Virtual Machine: nohup VBoxSDL --startvm vm1 or nohup VBoxSDL --startvm vm1 & After that, I don't have the prompt anymore. Then, if I switch off my local machine, the virtual machine goes down (no matter whether I use & or not). How can I keep it running after I switch off my local machine?

    Read the article

  • putty output screen too small?

    - by iie
    I'm having strange problem with my putty console. I'm establishing connection over ssh to my home computer [ windows 7 + freesshd server ]. Everything works just fine, but I'm getting this tiny screen with output, I can resize it of course, but the content is still in small box [ content doesn't resize ] I've tried to change the number of columns and rows in properties, but it didn't change anything. The same thing is with cygwin client.

    Read the article

  • Can't login as root but I can SU while logged with another user

    - by Rhyuk
    What I was doing before this happened?: I was tinkering trying to setup X server so I can open an app's GUI remotely so I installed "X Window System", "xclock" and uncommented "# ForwardX11 yes" from my "/etc/ssh/ssh_config". (never got it working but thats a whole other question) Since that moment I'm not able to login as root from Putty (I get Access Denied). I can login as another user and I can "su" successfully so I know the password is right. How can have direct access with root again?

    Read the article

  • Can't connect to EC2 instance in VPC (Amazon AWS)

    - by Ryan Lynch
    I've taken the following steps: Created a VPC (with a single public subnet) Added an EC2 instance to the VPC Allocated an elastic IP Associated the elastic IP with the instance Created a security group and assigned it to the instance Modified the security rules to allow inbound ICMP echo and TCP on port 22 I've done all this and I still can't ping or ssh into the instance. If I follow the same steps minus the VPC bits I am able to set this up without issue. What step am I missing?

    Read the article

  • debian gateway using iptables

    - by meijuh
    I am having problems setting up a debian gateway server. My goal: Having eth1 the WAN interface. Having eth0 the LAN interface. Allow both ports 22 (SSH) and 80 (HTTP) accessed from the outside world on the gateway (SSH and HTTP run on this server). What I did was the following: Create a file /etc/iptables.rules with contents: /etc/iptables.rules: *nat -A POSTROUTING -o eth1 -j MASQUERADE COMMIT *filter -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i eth1 -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth1 -j DROP COMMIT edit /etc/network/interfaces as follows: /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.rules auto eth0 allow-hotplug eth0 iface eth0 inet dhcp #auto eth1 #allow-hotplug eth1 #iface eth1 inet dhcp allow-hotplug eth1 iface eth1 inet static address 217.119.224.51 netmask 255.255.255.248 gateway 217.119.224.49 dns-nameservers 217.119.226.67 217.119.226.68 Uncomment the rule net.ipv4.ip_forward=1 in /etc/sysctl.conf to allow packet forwarding. The static settings for eth1 such as the ip address I got from my router (which I want to replace); I simply copied these. I have a (windows) DNS + DHCP server on ip address 10.180.1.10, which assigns ip address 10.180.1.44 to eth0. What this server does is not really interesting it only maps domain names on our local network and assigns one static ip to the gateway. What works: on the gateway itself I can ping 8.8.8.8 and google.nl. So that is okey. What does not work: (1) Every machine connected to eth0 (indirectly via a switch) can not ping an ip or a domain. So I guess the gateway can not be found. (2) Also when I configure my linux machine (a laptop) to use a static ip 10.180.1.41, a mask and a gateway (10.180.1.44) I can not ping an ip or domain either. This means that maybe my iptables is incorrect of not loaded correctly. Or I maybe have to configure my DNS/DHCP on my windows machine. I have not reset the windows machine net, restart the DNS/DHCP services, should I do this? I did not install dnsmasq as desribed here: http://blog.noviantech.com/2010/12/22/debian-router-gateway-in-15-minutes/. I don't think this is necessary?

    Read the article

  • Some sites won't load on Ubuntu/Mint

    - by Or W
    I have a REALLY weird problem with either my network or my OS. Last week I've suddenly had difficulties loading some websites or even more odd some parts of different websites. For example, I could load gmail.com, login and view the list of emails in my inbox but when I clicked one of them it would just time out. Another example is http://www.ynet.co.il, I can view the home page but going into any one of the articles fails (times out). I've tried Chrome, Firefox and Opera, all fail the same way. If I take a URL of a page I cannot load via the browser and try to wget it though the console I get the file just fine. I've formatted my machine (Used to run Ubuntu 13.04) and installed Mint Linux this time, it worked fine for a few days and now, again, having the same exact issues. Important to note that I have other machines connected either directly or via Wi-Fi to the router and they are all working fine (two win7 machines and 1 raspberry pi). Another strange behavior is that I can ftp or ssh to remote machines but cannot send files via ftp (times out) even if I set passive mode ON and when using ssh I can do just about anything but I cannot paste text into the remote machine, for example if I nano a file on the remote machine and try to paste anything from my clipboard it freezes. What I've tried so far: Disable IPv6 on the networking admin (and on firefox disabling ipv6 on the about:config page) Changing the port and the network cable I went to the store and bought a new standalone PCIe network adapter Connected my win7 laptop using the same cable and router port (sites that were not working on my Mint are working just fine on the win7 machine) Loaded Mint from a livecd, got the same result Tried changing the MTU (was 1500, tried 1492) Some observations: When I clear my browser cache and go to facebook.com for example, the homepage loads but I fail to load any profile/group page. If I refresh facebook.com homepage a couple of times it stops and fails to load until I clear my browser cache. I changed the chrome cache folder permissions to 0777 but that did not help. When I run netstat -n I see A LOT of connections that are in 'FIN_WAIT' mode (I'm guessing that's when I try to refresh pages that are not working and timing out), I have no idea what it means or if it helps anyone figure out what's wrong. The sites that are not loading correctly are always that same, they don't vary or anything and they fail to load exactly the same way on all three browsers that I've tried. When I Googled 'Ubuntu some sites not loading' I see a huge amount of complaints just like mine, but none of them that I could find actually says what the problem is or how they fixed it. Technical stuff: netstat -n ps aux netstat -nr

    Read the article

  • Server unable to communicate OUT, fine serving traffic

    - by jonoabroad
    We have several servers that are randomly loses the ability to communicate out to other nodes on the local network and internet. However websites are being served fine and we still have ssh access. A reboot seems to fix the problem for a few days. The servers are running 10.5.X and are fully up to date with software updates. Does anyone have any opinions, we think it is probably an ISP router, but we are guessing. Cheers Jono

    Read the article

  • APC File Cache not working but user cache is fine

    - by danishgoel
    I have just got a VPS (with cPanel/WHM) to test what gains i could get in my application with using apc file cache AND user cache. So firstly I got the PHP 5.3 compiled in as a DSO (apache module). Then installed APC via PECL through SSH. (First I tried with WHM Module installer, it also had the same problem, so I tried it via ssh) All seemed fine and phpinfo showed apc loaded and enabled. Then I checked with apc.php. All seemed OK But as I started testing my php application, the stats in apc for File Cache Information state: Cached Files 0 ( 0.0 Bytes) Hits 1 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Which meant no PHP files were being cached, even though I had browsed through over 10 PHP files having multiple includes. So there must have been some Cached Files. But the user cache is functioning fine. User Cache Information Cached Variables 0 ( 0.0 Bytes) Hits 1000 Misses 1000 Request Rate (hits, misses) 0.84 cache requests/second Hit Rate 0.42 cache requests/second Miss Rate 0.42 cache requests/second Insert Rate 0.84 cache requests/second Cache full count 0 Its actually from an APC caching test script which tries to retrieve and store 1000 entries and gives me the times. A sort of simple benchmark. Can anyone help me here. Even though apc.cache_by_default = 1, no php files are being cached. This is my apc config Runtime Settings apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 1M apc.mmap_file_mask apc.num_files_hint 1000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 32M apc.slam_defense 1 apc.stat 1 apc.stat_ctime 0 apc.ttl 0 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock 1 Also most php files are under 20KB, thus, apc.max_file_size = 1M is not the cause. I have also tried using 'apc_compile_file ' to force some files into opcode cache with no luck. I have also re-installed APC with Debugging enabled, but nothing shows in the error_log I have also tried setting mmap_file_mask to /dev/zero and /tmp/apc.xxxxxx, i have also set /tmp permissions to 777 to no avail Any clue anyone. Update: I have tried following things and none cause APC file cache to populate 1. set apc.enable_cli = 1 AND run a script from cli 2. Set apc.max_file_size = 5M (just in case) 3. switched php handler from dso to FastCGI in WHM (then switched it back to dso as it did not solve the problem) 4. Even tried restarting the container

    Read the article

  • Piping Mail with Exim: Only Works Locally

    - by John
    Whenever I send an email to my catchall alias via SSH (i.e., locally), Exim successfully pipes the e-mail to a PHP script, as I told it to do. However, when I try to send an e-mail to my catchall alias via my e-mail client (i.e., remotely), Exim won't pipe the e-mail. Any ideas?

    Read the article

  • pushing files via sftp

    - by Brettski
    A client wants us to push data files to them on a daily basis using SFTP (ssh over ftp). We are a 100% Microsoft shop with no Linux admins on staff. I am looking for recommendations on how to do achieve this. I have seen different applications for automating the sending of files via SFTP, but I don't know if they are a good approach or not. What have you found to be the easiest way to deal with this in a Microsoft Environment?

    Read the article

  • How to create a snapshot volume to a remote server?

    - by Purres
    I want to backup a few virtual machines to a backup server. Here're the backup steps. suspend a virtual machine create a snapshot of the virtual machine using lvcreate -s resume a virtual machine dd if=/virtual_machine_path | lzop > /temp/backup.lzo rsync /temp/backup.lzo -e "ssh " 1.2.3.4:/backup_path/ However, the hypervisor server doesn't have enough hard disk space to create a snapshot in step 2. Is there a way to create a logical volume snapshot to a remote server?

    Read the article

  • How to set the subversion repository root in Debian?

    - by Andrew Whitehouse
    I have just switched from an old Fedora Core server to Debian Linux v5.0.4. Having migrated the old repository and configured access through svn+ssh, I now want to be able to access the repository with the same path on the client as before. On Fedora you could specify the repository root with "svnserve -r " but having checked the config files and svnadmin options I'm stuck as to how I can do this on Debian. Is there a way to set the repository root in Debian?

    Read the article

  • Hang while starting several daemons

    - by Adrian Lang
    I’m running a Debian Squeeze AMD64 server. Target runlevel after boot is runlevel 2, which includes rsyslogd, cron, sshd and some other stuff, but not dovecot, postfix, apache2, etc. The system fails to reach runlevel 2 with several symptoms: The system hangs at trying to start rsyslogd Booting into runlevel 1 works, then login from the console works Starting rsyslogd from runlevel 1 via /etc/init.d/rsyslog hangs Starting runlevel 2 with rsyslogd disabled works But then, logging in via console fails: I get the motd, and then nothing Starting sshd from runlevel 1 succeeds But then, I cannot login via ssh. Sometimes password ssh login gives me the motd and then nothing, sometimes not even this. Trying to offer a public key seems to annoy the sshd enough to not talk to me any further. When rebooting from runlevel 1, the server hangs at trying to stop apache2 (which is not running, so this really should be trivial). Trying to stop apache2 when logged in in runleve 1 does hang as well. And that’s just the stuff which fails all the time. RAM has been tested, dmesg shows no problems. I have no clue. Update: (shortened) output from rsyslogd -c4 -d called in runlevel 1 rsyslogd 4.6.4 startup, compatibility mode 4, module path '' caller requested object 'net', not found (iRet -3003) Requested to load module 'lmnet' loading module '/user/lib/rsyslog/lmnet.so' module of type 2 being loaded conf.c requested ref for 'lmnet', refcount 1 rsylog runtime initialized, version 4.6.4, current users 1 syslogd.c requested ref for 'lmnet', refcount now 2 I can kill rsyslogd with Strg+C, then. /var/log shows none of the configured log files, though. Update2: Thanks to @DerfK I still have no clue, but at least I narrowed down the problem. I’m now testing with /etc/init.d/apache2 stop (without an apache2 running, of course) which hangs as well and looks like an even more obvious failure. After some testing I found out that a file with one single line: /usr/sbin/apache2ctl configtest /dev/null 2&1 hangs, while the same line executed in an interactive shell works. I was not able to further reduce this line while, i. e. every single part, the stream redirections and the commando itself is necessary to reproduce the hang. @DerfK also pointed me to strace which gave a shallow hint about what kind of hang we have here: wait4(-1for the init scripts futex(0xsomepointer, FUTEX_WAIT_PRIVATE, 2, NULL for rsyslogd / apache2 binaries called by the init scripts The system was installed as a Debian Lenny by my hoster in autumn 2011, I upgraded it to Squeeze immediately and kept it up to date with Squeeze, which then used to be testing. There were no big changes, though. I guess I never tried to reboot the system before.

    Read the article

  • how to switch to another window when Ctrl + B not works for tmux?

    - by hugemeow
    as we all know tmux is quite nice tool, but there is some scenerios that Ctrl + B cannot be used for example: i sshd to server A, and now i connect to A's tmux pty, so Ctrl + B is captured by server A. then i ssh to server B from server A, and there is also tmux running on Server B, this time, Ctrl + B only works for server A, and cannot be used by server B, so if i want to switch windows for server B, what should i do then?

    Read the article

  • FreeBSD jail with IPFW with loopback - unable to connect loopback interface

    - by khinester
    I am trying to configure a one IP jail with loopback interface, but I am unsure how to configure the IPFW rules to allow traffic to pass between the jail and the network card on the server. I have followed http://blog.burghardt.pl/2009/01/multiple-freebsd-jails-sharing-one-ip-address/ and https://forums.freebsd.org/viewtopic.php?&t=30063 but without success, here is what i have in my ipfw.rules # vim /usr/local/etc/ipfw.rules ext_if="igb0" jail_if="lo666" IP_PUB="192.168.0.2" IP_JAIL_WWW="10.6.6.6" NET_JAIL="10.6.6.0/24" IPF="ipfw -q add" ipfw -q -f flush #loopback $IPF 10 allow all from any to any via lo0 $IPF 20 deny all from any to 127.0.0.0/8 $IPF 30 deny all from 127.0.0.0/8 to any $IPF 40 deny tcp from any to any frag # statefull $IPF 50 check-state $IPF 60 allow tcp from any to any established $IPF 70 allow all from any to any out keep-state $IPF 80 allow icmp from any to any # open port ftp (20,21), ssh (22), mail (25) # ssh (22), , dns (53) etc $IPF 120 allow tcp from any to any 21 out $IPF 130 allow tcp from any to any 22 in $IPF 140 allow tcp from any to any 22 out $IPF 150 allow tcp from any to any 25 in $IPF 160 allow tcp from any to any 25 out $IPF 170 allow udp from any to any 53 in $IPF 175 allow tcp from any to any 53 in $IPF 180 allow udp from any to any 53 out $IPF 185 allow tcp from any to any 53 out # HTTP $IPF 300 skipto 63000 tcp from any to me http,https setup keep-state $IPF 300 skipto 63000 tcp from any to me http,https setup keep-state # deny and log everything $IPF 500 deny log all from any to any # NAT $IPF 63000 divert natd ip from any to any via $jail_if out $IPF 63000 divert natd ip from any to any via $jail_if in but when i create a jail as: # ezjail-admin create -f continental -c zfs node 10.6.6.7 /usr/jails/node/. /usr/jails/node/./etc /usr/jails/node/./etc/resolv.conf /usr/jails/node/./etc/ezjail.flavour.continental /usr/jails/node/./etc/rc.d /usr/jails/node/./etc/rc.conf 4 blocks find: /usr/jails/node/pkg/: No such file or directory Warning: IP 10.6.6.7 not configured on a local interface. Warning: Some services already seem to be listening on all IP, (including 10.6.6.7) This may cause some confusion, here they are: root syslogd 1203 6 udp6 *:514 *:* root syslogd 1203 7 udp4 *:514 *:* i get these warning and then when i go into the jail environment, i am unable to install any ports. any advice much appreciated.

    Read the article

  • Run VirtualBox in background, without a window

    - by Bashman
    Hi! I was wandering if it's possible to run an Ubuntu virtual machine using VirtualBox in background, I mean, without any window open. The idea is to conect via SSH to the linux host, that would be running in background. Have you ever done somenthing like this? Is it possible? Thanks!

    Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >