Search Results

Search found 111150 results on 4446 pages for 'ubuntu novice user'.

Page 111/4446 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

  • which drive do I mount

    - by Crash893
    I have a system hdd then two raid1 hard drives I see that sda1 is the system drive but when i do a fdisk -l I get the following results so which of the following do i need to mount to get the "raid" drive and not the individual hdd? root@Mxxxx-PDC:/etc/samba# fdisk -l Disk /dev/sda: 251.0 GB, 251000193024 bytes 255 heads, 63 sectors/track, 30515 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000762dc Device Boot Start End Blocks Id System /dev/sda1 * 1 30328 243609628+ 83 Linux /dev/sda2 30329 30515 1502077+ 5 Extended /dev/sda5 30329 30515 1502046 82 Linux swap / Solaris Disk /dev/sdb: 400.0 GB, 400088457216 bytes 255 heads, 63 sectors/track, 48641 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 48641 390708801 83 Linux Disk /dev/sdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0009f4b2 Device Boot Start End Blocks Id System /dev/sdc1 * 1 255 2048256 fd Linux raid autodetect /dev/sdc2 256 30401 242147745 fd Linux raid autodetect Disk /dev/sdd: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000b7f4c Device Boot Start End Blocks Id System /dev/sdd1 * 1 255 2048256 fd Linux raid autodetect /dev/sdd2 256 30401 242147745 fd Linux raid autodetect

    Read the article

  • OSSEC is not running

    - by batman
    I have an two ec2 instances. In one I have installed ossec server and in other I have installed ossec agent. Here are my server config INBOUND (security group/firewall) : port:514 source:0.0.0.0/0 port:1514 source:0.0.0.0/0 But it seems to be not working. In my agent log file I keep on getting: 2012/08/28 06:52:52 ossec-agentd: INFO: Using IPv4 for: x.x.x.x.x.x . 2012/08/28 06:53:13 ossec-agentd(4101): WARN: Waiting for server reply (not started). Tried: 'x.x.x.x.x'. Edit: Running sudo netstat --inet -nlp | grep ossec. I'm getting: udp 0 0 0.0.0.0:1514 0.0.0.0:* 26027/ossec-remoted Where I'm making the mistake?

    Read the article

  • TFTP Timing Out on Ubuntu VM

    - by valsidalv
    I'm running a Windows 7 PC with VMware installed which has my Ubuntu (10.04 Lucid Lynx). I recently installed a DHCP server and TFTP (Xinet tftpd) using these instructions. I've mapped a network drive so that my Windows has access to all the files in my VM through a 192.x.x.x IP address. I'm trying to throw some custom firmware onto a router. The router has its own built-in TFTP utility that will download the image. It successfully manages to do everything but it is slow because it writes it to flash memory. There is another method that is much quicker because it writes to RAM directly but it must use the TFTP server in Ubuntu. The issue I'm facing is that the Ubuntu TFTP transfer seems to be timing out. The transfer starts but never goes past ~60%. Here's my /etc/xinetd.d/tftp file (similar to a known working config): service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -s /home/user/tftp/ disable = no cps = 300 2 per_source = 60 } I've done some searching but can't find any parameters for this file to control timeout time or number of retries. The last two arguments (cps, per_source) and completely alien to me (can anyone explain). I have a few possible solutions but the easiest would be to get this TFTP server working. Can anyone help? Either with a timeout configuration or maybe even recommend a different TFTP server? Thanks!

    Read the article

  • 100% CPU load on Ubuntu 10.04.3 LTS 64bit

    - by deadtired
    I have 2 days since I am trying to fix this issue, with no success. The server is a mysql database server. Hardware: DELL Poweredge 1950, 2x Intel Xeon Quad Core E5345 @ 2.33GHz, 16 Gb mem, 2x 146Gb SAS (software RAID1) Software: Ubuntu 10.04.3 LTS, MySQL 5.1.41 Issue: while mysql is not used and runs with no database, everything seems alright. As soon as I install a database, it has the reason to bring all 8 cores in 100% with low memory consumption. So, you can imagine the load average goes high (I saw 212 load average for the first time). The server doesn't become unresponsive, but you can see it's slow while browsing the project installed. Additional info: the database used is not more than 24MB and it was moved from a server with less resources and a lot more larger databases. So it's not the database/project. my.cnf is not a reason also, as I used both default one and the one I use on the same distribution on another server.What is interesting is that mysql doesn't close any process and runs to the limit of the max_connections. Logs are quiet. Nothing there. I switched to this Ubuntu version after I suspected some problems in the newly Ubuntu 11.10 server. This one worked alright for an hour after I made a kernel upgrade to 3.0.1 (it was using the memory also) I tested disk speed and seems alright. Some more output on the running server: dstat -cndymlp -N total -D total 3: htop command: Idea? Did anyone meet the same problem? Any fix you can think of?

    Read the article

  • configuring apache with mod_mono for .net app

    - by Mystere Man
    I'm having a huge problem getting mod_mono and apache configured to work correctly. I've had this working at one time, but I can't seem to figure out where i'm going wrong. I'm using mono-server4. I'm trying to use a seperate port from the main website. So I have in /etc/apache2/sites-available (with a link from sites-enabled) a vhost configuration that looks like this: <VirtualHost *:9999> ServerName XXX ServerAdmin web-admin@XXX DocumentRoot /var/xxx MonoServerPath XXX "/usr/bin/mod-mono-server4" MonoDebug XXX true MonoSetEnv XXX MONO_IOMAP=all MonoApplications XXX "/:/var/xxx" <Location "/"> Allow from all Order allow,deny MonoSetServerAlias XXX SetHandler mono SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI "\.(?:gif|jpe?g|png)$" no-gzip dont-vary </Location> <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript </IfModule> </VirtualHost> I used mono-server4-admin to create the application mono-server4-admin --path=/var/xxx --app=/XXX --port=9999 When i start apache, it gives the error: Syntax error on line 13 of /etc/apache2/sites-enabled/xxx: Server alias 'XXX, not found. This corresponds with the MonoSetServerAlias statement. So I commented it out, and when I do that apache starts. However, when I try to access the site, I get a 500 error. The access log indicates that it's trying to access the app on port 80, rather than 9999. I'm not sure what the problem is here. Can anyone help me get figure out where I went wrong? My mono-server4-hosts.conf contains this: # start /etc/mono-server4/conf.d/RMRSite/10_XXX Alias /XXX "/var/xxx" AddMonoApplications default "/XXX:/var/xxx" <Directory /var/xxx> SetHandler mono <IfModule mod_dir.c> DirectoryIndex index.aspx </IfModule> </Directory> # end /etc/mono-server4/conf.d/XXX/10_XXX Also, my /etc/mono-server4/conf.d/XXX/10_XXX contains this: This is the configuration file for the XXX virtualhost path = /var/xxx alias = /XXX vhost = localhost port = 9999

    Read the article

  • How does the os know which paramater to pass to /etc/init.d/

    - by iDev247
    I've been working with linux for a while but in a rather simple manner. I understand that scripts in init.d are executed when the os starts but how exactly does it works? How does the os know which paramater to pass to a script? To start apache I would do sudo /etc/init.d/apache2 start. If I run sudo /etc/init.d/apache2 it doesn't work without the start. How does the os pass start to the script?

    Read the article

  • Ubuntu cannot access internet, LAN is fine

    - by Kevin Southworth
    I have an Ubuntu 8.04 LTS server that is directly connected to our Comcast Business Gateway modem and I have configured it with 1 of our 5 allotted Static IPs. My other machines on our LAN can connect to this server (via ssh, web, ping, etc.) but I cannot access this server from outside our network, and this machine cannot get out to the internet either (ping google.com fails with unknown host). Here is my /etc/networking/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.162.54.19 netmask 255.255.255.248 broadcast 173.162.54.23 gateway 173.162.54.22 and my /etc/resolv.conf: nameserver 68.87.77.130 nameserver 68.87.72.130 output from sudo route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 173.162.54.16 0.0.0.0 255.255.255.248 U 0 0 0 eth0 0.0.0.0 173.162.54.22 0.0.0.0 UG 100 0 0 eth0 I have a Windows 2008 machine with an almost identical Static IP, static DNS setup and it works correctly, can access it within the LAN and also from public internet, the Windows machine and the Ubuntu machine are both directly connected to the Comcast Business Gateway. I have tried rebooting Ubuntu, rebooting my Comcast modem, but nothing seems to make it work. I'm an Ubuntu noob, is there some other config I need to apply to make this work? UPDATE: Yes I am able to ping my default gateway 173.162.54.22 output of iptables --list -n: Chain INPUT (policy DROP) target prot opt source destination ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-input all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination ufw-before-forward all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-forward all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ufw-before-output all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-output all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-forward (1 references) target prot opt source destination LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK FORWARD]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-input (1 references) target prot opt source destination RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:137 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:138 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:139 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:67 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68 LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK INPUT]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-forward (1 references) target prot opt source destination ufw-user-forward all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED DROP all -- 0.0.0.0/0 0.0.0.0/0 ctstate INVALID ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:67 dpt:68 ufw-not-local all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 224.0.0.0/4 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 224.0.0.0/4 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-output (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ufw-user-output all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-not-local (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type MULTICAST RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type BROADCAST LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK NOT-TO-ME]: ' DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-forward (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0

    Read the article

  • Web based KVM management for Ubuntu

    - by Tim
    We've got a single Ubuntu 9.10 root server on which we want to run multiple KVM virtual machines. To administer these virtual machines I'd like a web based KVM management tool, but I don't know which one to choose from the list of tools mentioned on linux-kvm.org. I've used virsh & virt-manager on my desktop, but would like a web interface for the server. I tested ConVirt on my desktop, but it failed to pickup KVM machines from virsh / virt-manager, and I could not get KVM virtual machine import to work (only Xen). oVirt looks good, but I can't find out if and how I can install it on Ubuntu 9.10.. (And I'd really rather not waste another few days on testing stuff that might not work in the end.) Can anyone recommend any good web based KVM management tools that are easy to install on Ubuntu 9.10? I'm looking for something that will also allow me to run other services like apache and postgresql besides hosting virtual machines, so preferably fairly lightweight & no dedicated OS installs. We don't need any professional clustering / migration or anything, just something that will let us create, start, inspect, administer & stop virtual machines from a web page. Best regards, Tim Update: Anyone have any suggestions? It's awfully quiet here..

    Read the article

  • ubuntu's average load never below "0.00 0.01 0.05"

    - by Karma Fusebox
    I have several ubuntu 12.04 VMs running on a ubuntu 12.04 KVM host. Those of the virtual machines that are totally idle with no services (except syslog and the other "small" standard stuff of a fresh installation) show a constant load of "0.00 0.01 0.05" in top/htop as average 1/5/15. When there are "real" applications running, the load averages behave perfectly normal but they never fall below the mentioned values. While this doesn't affect performance at all and could easily be ignored, it screws up the monitoring graphs in a very annoying way: (Notice how load15 behaves nicely if 0.05 for a short time in the right half of the pic) Unfortunately I don't know what diagnostic outputs might be helpful for you, so here's some default stuff: # top top - 16:31:01 up 1:05, 1 user, load average: 0.00, 0.01, 0.05 Tasks: 62 total, 1 running, 61 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.2%sy, 0.0%ni, 99.2%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1019464k total, 73452k used, 946012k free, 6140k buffers Swap: 0k total, 0k used, 0k free, 22504k cached . # free -m total used free shared buffers cached Mem: 995 72 923 0 6 21 -/+ buffers/cache: 43 951 Swap: 0 0 0 . # iostat -x /dev/vda Linux 3.2.0-32-virtual (vm3) 11/15/2012 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 0.25 0.00 0.65 0.20 0.24 98.66 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util vda 0.14 0.12 0.51 0.22 6.74 1.46 22.50 0.02 23.26 20.64 29.30 7.63 0.56 Need something else? Has anyone ever seen this behavior? Might this be a bug in kvm/ubuntu/kernel 3.x in the end? Thanks a lot!

    Read the article

  • Kickstarting an Ubuntu Server 10.04 installation (DHCP fails)

    - by William
    I'm trying to automate the network installation of Ubuntu 10.04 LTS with an anaconda kickstart and everything seems to running except for the initial DHCP autoconfiguration. The installer attempts to configure the install via DHCP but fails on its first attempt. This brings me to a prompt where I can retry DHCP and it seems to always work on the second attempt. My issue is that this is not really automated if I have to hit retry for DHCP. Is there something I can add to the kickstart file so that it will automatically retry or better yet not fail the first time? Thanks. Kickstart: # System language lang en_US # Language modules to install langsupport en_US # System keyboard keyboard us # System mouse mouse # System timezone timezone America/New_York # Root password rootpw --iscrypted $1$unrsWyF2$B0W.k2h1roBSSFmUDsW0r/ # Initial user user --disabled # Reboot after installation reboot # Use text mode install text # Install OS instead of upgrade install # Use Web installation url --url=http://10.16.0.1/cobbler/ks_mirror/ubuntu-10.04-x86_64/ # System bootloader configuration bootloader --location=mbr # Clear the Master Boot Record zerombr yes # Partition clearing information clearpart --all --initlabel # Disk partitioning information part swap --size 512 part / --fstype ext3 --size 1 --grow # System authorization infomation auth --useshadow --enablemd5 %include /tmp/pre_install_ubuntu_network_config # Always install the server kernel. preseed --owner d-i base-installer/kernel/override-image string linux-server # Install the Ubuntu Server seed. preseed --owner tasksel tasksel/force-tasks string server # Firewall configuration firewall --disabled # Do not configure the X Window System skipx %pre wget "http://10.16.0.1/cblr/svc/op/trig/mode/pre/system/Test-D" -O /dev/null # Network information # Start pre_install_network_config generated code # Start of code to match cobbler system interfaces to physical interfaces by their mac addresses # Start eth0 # Configuring eth0 (00:1A:64:36:B1:C8) if ip -o link show | grep -i 00:1A:64:36:B1:C8 then IFNAME=$(ip -o link show | grep -i 00:1A:64:36:B1:C8 | cut -d" " -f2 | tr -d :) echo "network --device=$IFNAME --bootproto=dhcp" >> /tmp/pre_install_ubuntu_network_config fi # End pre_install_network_config generated code %packages openssh-server

    Read the article

  • Ubuntu inside VirtualBox is slow

    - by Kapsh
    I am running an Ubuntu instance on VirtualBox inside XP. Here are the details: Host: Windows XP Pro Guest: Ubuntu 8.10 Total RAM: 3GB RAM For VM: 1GB Total Video Memory: 128MB Video Memory for VM: 40MB Hard Drive: 200GB Hard Drive for VM: 30GB Processor: 2.80GHz Core Duo The problem is that whenever I am inside the virtual machine, things seem so much slower in general. For example Firefox, Eclipse take longer to load, dragging windows show a lag etc. I have tried running Ubuntu before (not inside a VM) and it seemed fantastically fast. So I am disappointed to have to deal with this situation. But I need access to the XP partition without having to reboot and hence the attempt. I am surprised with the perceived slowness since the whole world seems to be doing virtualization and I cannot imagine everyone works on slow systems knowingly. My question is - is there something I should be doing to boost performance? Am I doing something wrong? This is my home machine and I am not sure if this is the right forum to ask. Thanks.

    Read the article

  • How to install (old) packages for Ubuntu 9.04?

    - by wchrisjohnson
    Based on some excellent feedback by Mark here (http://serverfault.com/questions/285598/should-i-clone-a-physical-server-to-create-a-vm-for-a-staging-server), today I was able to use the vmware converter to clone my production server for a staging server. However the nic won't come up no matter what I do. I attempted to inistall vmware tools, as I suspect that the fact that it is not installed might prevent the nic from working. (I have the nic set as a vmxnet3 card in the vm settings). The install failed because there were several dependencies missing as well as the Linux headers. Given that Ubuntu 9.04 has been EOL'd, the packages I need to install to get the vmware tools to install are no longer available. I doubt the ubuntu 9.04 install CD has the packages on it. What are my options? I'd rather not upgrade the version of Ubuntu yet, as the point of the vm right now is to maintain parity with the production server. Might I have better luck resetting the driver to use vmxnet2 instead of the vmxnet3? Thanks in advance! Chris

    Read the article

  • adding ftp user on ubuntu

    - by user46250
    I followed this tut http://www.trainsignal.com/blog/how-to-set-up-safe-ftp-in-linux to setup an ftp server with user account sudo mkdir -p /home/ftp/ftpuser sudo useradd ftpuser -d /home/ftp/ftpuser -s /bin/false sudo passwd ftpuser when I tried to connect with login ftpuser remotely it didn't work. It didn't work even with root UNLESS I removed root from ftpusers. I am confused ftpusers are the users NOT allowed to do ftp ? Where are the list of users allowed then and why can't I connect with ftpuser I created ?

    Read the article

  • How does the operating system know which parameter to pass to /etc/init.d/ ?

    - by iDev247
    I've been working with linux for a while but in a rather simple manner. I understand that scripts in init.d are executed when the os starts but how exactly does it works? How does the os know which paramater to pass to a script? To start apache I would do sudo /etc/init.d/apache2 start. If I run sudo /etc/init.d/apache2 it doesn't work without the start. How does the os pass start to the script?

    Read the article

  • How to remove/backup script from /etc/init.d/?

    - by iDev247
    I've been working with linux for a while but in a rather simple manner. I understand that scripts in init.d are executed when the os starts but how exactly does it works? What if I want to keep a script but don't want it to start automaticly? Say I have a /etc/init.d/varnish and want to disable it temporary. How do I make sure it doesn't start if the os reboots? I don't want to delete the script. What if I want to add it again?

    Read the article

  • Win7 Domain User Profile- Desktop Icon management best practices request

    - by Doltknuckle
    Here's the situation: We have a large (5,000+ user) organization that is currently using folder redirection to manage the windows desktop icons. This folder is redirected to a network share where we can centrally manage the different sites and such. When a user tries to use a computer when the network is not available, they are unable to use any shortcuts in the Public folder. We only redirect the C:\Users\%username%\Desktop folder. Does anyone have any suggestions of how to go about managing desktop icons? We still want a central location to manage these items, but find a way to keep the system working when the network is unavailable. As a point of clarification, the network rarely goes down. We do have instances where a few computers do not have a network connection. Usually, something is simply unplugged. Since we have multiple sites, the line from a branch to the central office has gone down a few times. This is more of an attempt to maintain a positive end user experience when disconnected from the network.

    Read the article

  • Django anonymous user in model

    - by jack
    I have a model defined as below: class Example(models.Model): user = models.ForeignKey(User, null=True) other = models.CharField(max_length=100) The problem is Django refuses to assign django.contrib.auth.models.AnonymousUser directly to Example.user as null field so everytime I have to check if request.user.is_authenticated() ans assign Example.user = None manually. Is there a default value for AnonymousUser to use in a model field?

    Read the article

  • Broken cups installation on a ubuntu server 64

    - by user67046
    Hi, I am having trouble with an cups installation. It seems to be in a broken state. When i try to reinstall it it stalls, the same if i try to remove it completely. I am running the server version 64 bit of Ubuntu 10.10 with kernel Linux version 2.6.35-22-server. When i try to start the cups daemon with the following command sudo service cups start It just stays there and nothing happens. I have tried to remove it, to be able to reinstall it, with the following command sudo apt-get purge cups It finally stalls with the following message Removing cups ... After that nothing happens. The process tree for the apt-get command looks like this. 1404 1404 1404 ? 00:00:00 sshd 26495 26495 26495 ? 00:00:00 sshd 26581 26495 26495 ? 00:00:00 sshd 26582 26582 26582 pts/4 00:00:00 bash 27158 27158 26582 pts/4 00:00:00 apt-get 27172 27172 27172 pts/2 00:00:00 dpkg 27176 27172 27172 pts/2 00:00:00 cups.prerm 27178 27172 27172 pts/2 00:00:00 stop I have tried to leave the process running for a while to see if i get any error messages but without success. To get out of it I have to kill the processes. sudo dpkg --configure cups dpkg: error processing cups (--configure): package cups is already installed and configured Errors were encountered while processing: cups sudo dpkg --status cups Package: cups Status: purge ok installed Priority: optional Section: net Installed-Size: 8292 Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com> Architecture: amd64 Version: 1.4.4-6ubuntu2.3 Replaces: cupsddk-drivers (<< 1.4.0) Provides: cupsddk-drivers Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.7), libcups2 (>= 1.4.4-3~), libcupscgi1 (>= 1.4.2), libcupsdriver1 (>= 1.4.0), libcupsimage2 (>= 1.4.0), libcupsmime1 (>= 1.4.0), libcupsppdc1 (>= 1.4.0), libdbus-1-3 (>= 1.0.2), libgcc1 (>= 1:4.1.1), libgnutls26 (>= 2.7.14-0), libgssapi-krb5-2 (>= 1.8+dfsg), libijs-0.35, libkrb5-3 (>= 1.6.dfsg.2), libldap-2.4-2 (>= 2.4.7), libpam0g (>= 0.99.7.1), libpaper1, libpoppler7, libslp1, libstdc++6 (>= 4.1.1), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4), debconf (>= 1.2.9) | debconf-2.0, upstart-job, poppler-utils (>= 0.12), procps, ghostscript, lsb-base (>= 3), cups-common (>= 1.4.4), cups-client (>= 1.4.4-6ubuntu2.3), ssl-cert (>= 1.0.11), adduser, bc, ttf-freefont, cups-ppdc Recommends: foomatic-filters (>= 4.0), cups-driver-gutenprint, ghostscript-cups Suggests: cups-bsd, foomatic-db-compressed-ppds | foomatic-db, hplip, xpdf-korean | xpdf-japanese | xpdf-chinese-traditional | xpdf-chinese-simplified, cups-pdf, smbclient (>= 3.0.9), udev Breaks: foomatic-filters (<< 4.0) Conflicts: cupsddk-drivers (<< 1.4.0) Conffiles: /etc/fonts/conf.d/99pdftoopvp.conf a5221cfad70a981c80864229ef56586d /etc/logrotate.d/cups 5bb41fa9900f0d1c565954405a2bd7c4 /etc/default/cups 2b436fbb1a32b82b6aba45a76a1d7e40 /etc/pam.d/cups ff2488324854f7b1e892bb0df062d5f0 /etc/init/cups.conf 1a3cd022e8474e3d2b44640f33ce68e3 /etc/ufw/applications.d/cups 29e98a6d850da251e180c3d68dec2bd3 /etc/apparmor.d/usr.sbin.cupsd 60c4b26bfd5c033baa3dd48a3b2e9911 /etc/cups/cupsd.conf e2c7ec15835ea0939e5e86f7c6efcc03 /etc/cups/snmp.conf 2326a8af1e112676d55245bc5eb459ca /etc/cups/cupsd.conf.default a68d54d76021e857dd1d64edf57d36c5 Description: Common UNIX Printing System(tm) - server The Common UNIX Printing System (or CUPS(tm)) is a printing system and general replacement for lpd and the like. It supports the Internet Printing Protocol (IPP), and has its own filtering driver model for handling various document types. . This package provides the CUPS scheduler/daemon and related files. Original-Maintainer: Debian CUPS Maintainers <[email protected]> Would be greatful if someone could provide some help on how to solve this issue.

    Read the article

  • How to make Shared Keys .ssh/authorized_keys and sudo work together?

    - by farinspace
    I've setup the .ssh/authorized_keys and am able to login with the new "user" using the pub/private key ... I have also added "user" to the sudoers list ... the problem I have now is when I try to execute a sudo command, something simple like: $ sudo cd /root it will prompt me for my password, which I enter, but it doesn't work (I am using the private key password I set) Also, ive disabled the users password using $ passwd -l user What am I missing? Somewhere my initial remarks are being misunderstood ... I am trying to harden my system ... the ultimate goal is to use pub/private keys to do logins versus simple password authentication. I've figured out how to set all that up via the authorized_keys file. Additionally I will ultimately prevent server logins through the root account. But before I do that I need sudo to work for a second user (the user which I will be login into the system with all the time). For this second user I want to prevent regular password logins and force only pub/private key logins, if I don't lock the user via" passwd -l user ... then if i dont use a key, i can still get into the server with a regular password. But more importantly I need to get sudo to work with a pub/private key setup with a user whos had his/her password disabled. Edit: Ok I think I've got it (the solution): 1) I've adjusted /etc/ssh/sshd_config and set PasswordAuthentication no This will prevent ssh password logins (be sure to have a working public/private key setup prior to doing this 2) I've adjusted the sudoers list visudo and added root ALL=(ALL) ALL dimas ALL=(ALL) NOPASSWD: ALL 3) root is the only user account that will have a password, I am testing with two user accounts "dimas" and "sherry" which do not have a password set (passwords are blank, passwd -d user) The above essentially prevents everyone from logging into the system with passwords (a public/private key must be setup). Additionally users in the sudoers list have admin abilities. They can also su to different accounts. So basically "dimas" can sudo su sherry, however "dimas can NOT do su sherry. Similarly any user NOT in the sudoers list can NOT do su user or sudo su user. NOTE The above works but is considered poor security. Any script that is able to access code as the "dimas" or "sherry" users will be able to execute sudo to gain root access. A bug in ssh that allows remote users to log in despite the settings, a remote code execution in something like firefox, or any other flaw that allows unwanted code to run as the user will now be able to run as root. Sudo should always require a password or you may as well log in as root instead of some other user.

    Read the article

  • Set up grub2 on cloned Ubuntu installation

    - by ptikobj
    With an Ubuntu Live Disc, I have copied my Ubuntu 10.04 installation to a new harddisk (with the same hardware). However, it doesn't boot, since I think I still need to set up grub for this new installation. How do I set up grub2 for a copied Ubuntu installation? All the tutorials for grub2 didn't really help me... running update-grub on the "original" Ubuntu installation doesn't find the copied Ubuntu installation.

    Read the article

  • Cannot install vlc in ubuntu 13.10

    - by nisargshah95
    for some reasons I cannot instal VLC media player on my Ubuntu Gnome 13.10 32bit. I added the VideoLAN PPA repository and ran sudo apt-get update and sudo apt-get install vlc Here's the log - nisarg@nisarg-ThinkPad-T61:~$ sudo apt-get install vlc Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: liba52-0.7.4 libaacs0 libass4 libavcodec53 libavformat53 libavutil51 libbluray1 libcddb2 libcrystalhd3 libdc1394-22 libdca0 libdirac-encoder0 libdirectfb-1.2-9 libdvbpsi8 libdvdnav4 libdvdread4 libebml3 libfaad2 libgsm1 libiso9660-8 libkate1 libmad0 libmatroska5 libmodplug1 libmpcdec6 libmpeg2-4 libopus0 libpostproc52 libresid-builder0c2a libschroedinger-1.0-0 libsdl-image1.2 libsdl1.2debian libsidplay2 libssh2-1 libswscale2 libtar0 libts-0.0-0 libtwolame0 libupnp6 libva-x11-1 libva1 libvcdinfo0 libvlc5 libvlccore5 libwebp4 libx264-123 libxcb-composite0 libxcb-keysyms1 libxcb-randr0 libxcb-xv0 libzvbi-common libzvbi0 tsconf vlc-data vlc-nox vlc-plugin-notify vlc-plugin-pulse Suggested packages: libbluray-bdj firmware-crystalhd libdvdcss2 debhelper opus-tools videolan-doc The following NEW packages will be installed: liba52-0.7.4 libaacs0 libass4 libavcodec53 libavformat53 libavutil51 libbluray1 libcddb2 libcrystalhd3 libdc1394-22 libdca0 libdirac-encoder0 libdirectfb-1.2-9 libdvbpsi8 libdvdnav4 libdvdread4 libebml3 libfaad2 libgsm1 libiso9660-8 libkate1 libmad0 libmatroska5 libmodplug1 libmpcdec6 libmpeg2-4 libopus0 libpostproc52 libresid-builder0c2a libschroedinger-1.0-0 libsdl-image1.2 libsdl1.2debian libsidplay2 libssh2-1 libswscale2 libtar0 libts-0.0-0 libtwolame0 libupnp6 libva-x11-1 libva1 libvcdinfo0 libvlc5 libvlccore5 libwebp4 libx264-123 libxcb-composite0 libxcb-keysyms1 libxcb-randr0 libxcb-xv0 libzvbi-common libzvbi0 tsconf vlc vlc-data vlc-nox vlc-plugin-notify vlc-plugin-pulse 0 upgraded, 58 newly installed, 0 to remove and 7 not upgraded. Need to get 16.7 MB of archives. After this operation, 75.0 MB of additional disk space will be used. Do you want to continue [Y/n]? y Get:1 http://ppa.launchpad.net/videolan/stable-daily/ubuntu/ saucy/main vlc-data all 2.0.8+git20131025+r620-0~r13~ubuntu13.10.1 [4,967 kB] Get:2 http://ppa.launchpad.net/videolan/stable-daily/ubuntu/ saucy/main libvlccore5 i386 2.0.8+git20131025+r620-0~r13~ubuntu13.10.1 [384 kB] Get:3 http://ppa.launchpad.net/videolan/stable-daily/ubuntu/ saucy/main libvlc5 i386 2.0.8+git20131025+r620-0~r13~ubuntu13.10.1 [42.4 kB] Get:4 http://ppa.launchpad.net/videolan/stable-daily/ubuntu/ saucy/main vlc-nox i386 2.0.8+git20131025+r620-0~r13~ubuntu13.10.1 [2,084 kB] Get:5 http://ppa.launchpad.net/videolan/stable-daily/ubuntu/ saucy/main vlc i386 2.0.8+git20131025+r620-0~r13~ubuntu13.10.1 [1,078 kB] Get:6 http://ppa.launchpad.net/videolan/stable-daily/ubuntu/ saucy/main vlc-plugin-notify i386 2.0.8+git20131025+r620-0~r13~ubuntu13.10.1 [5,836 B] Get:7 http://ppa.launchpad.net/videolan/stable-daily/ubuntu/ saucy/main vlc-plugin-pulse i386 2.0.8+git20131025+r620-0~r13~ubuntu13.10.1 [18.2 kB] Err http://archive.ubuntu.com/ubuntu/ saucy/universe libaacs0 i386 0.6.0-2 Connection failed [IP: 91.189.92.176 80] 51% [Waiting for headers] Now it doesn't move forward after this point. Any suggestions?

    Read the article

  • Problem booting Windows after failed installation Ubuntu 12.04 alongside Windows 7

    - by Tassos
    I tried to install in my laptop Ubuntu 12.04 so that I can dual-boot with Windows 7. I made some mistakes during this process and I didn't manage to install Ubuntu. But my real problem now is that I'm afraid that I also destroyed the installation of Windows 7. Your help would be precious for me. Here are the details of what I did: 1) I followed these instructions to dual boot Ubuntu 12.04 and Windows 7: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ The only difference from what is described above, is that in my case the device names where: /dev/mapper/isw_fdjdhbadc_Volume0* instead of: /dev/sda* Note that I had created a bootable USB stick to do that. 2) The installation proceeded normally, but in the end I got a fatal error because the grub-install failed. 3) Then, after googling this problem, I runned ubuntu from the USB stick and run this command: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0p5 (/isw_fdjdhbadc_Volume0p5 was the partition that I had made for /boot) but this command also failed. 4) Then, I did something stupid (I think): I run the above command as: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0 namely I tried to install grub in the device isw_fdjdhbadc_Volume0 instead of the boot partition isw_fdjdhbadc_Volume0p5 The above command did not fail and was executed ok. 5) After that, I tried to boot my laptop, but it seemed that I had no operation system. Not even windows were detected. 6) I thought that I should uninstall grub from isw_fdjdhbadc_Volume0. So following some online instructions that I found, I booted again Ubuntu from the USB stick and run the following command (this was stupid since the instructions were for a totally different case than mine): sudo dd if=/dev/zero of=/dev/mapper/isw_fdjdhbadc_Volume0 bs=446 count=1 Afte that, I was still unable to boot Windows. I realize that I deleted something that I shouldn't, but I'm hope that this is not crucial and I can recover somehow. When I boot Ubuntu from the USB, I can see that the partition with Windows is still there, with all the directories, Windows files, my data etc. So, my question is: Is there a way to undo the mistakes that I desribed above and recover Windows 7? This is my major question. After solving that, I'd also like to know what I did wrong with the installation of Ubuntu. Thanks in advance for you valuable help!

    Read the article

  • Ubuntu 10.04 LTS server update / upgrade issue

    - by user92603
    I have a starnge problem here with my Ubuntu 10.04 LTS server. When I try to update the server I got messages Err and warning, here an eg: sudo apt-get update Err http://fr.archive.ubuntu.com lucid Release.gpg W: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/lucid-security/multiverse/i18n/Translation-fr.bz2 Erreur temporaire de résolution de «*security.ubuntu.com*» but my server is connected and if I try to ping some DNS server (eg: 8.8.8.8 ) it works ! Can some one help me on that issue ?

    Read the article

  • Getting Ubuntu on Bootloader after formatting

    - by Muhammad Badi
    I've been running Windows XP on a desktop machine (C:/) and installed Ubuntu 12.04 (D:/) and Windows bootloader was able to recognize Ubuntu when I turn on the computer. Months later, I've formatted drive C:/, removed XP, and then installed Windows 7 but sadly, Ubuntu is not showing in the boot menu as it used to be presented: Windows 7 Ubuntu How to get it back on boot list? NOTE: Please note that installing Ubuntu was done from inside Windows XP with wubi.exe

    Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >