Search Results

Search found 12330 results on 494 pages for 'old retired dude'.

Page 112/494 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• None of usb-controllers are working after a crash

  - by Cray

  So I have a GA-p35-DS4 mboard with a Q6600, running windows7-x64. After a random crash with a bluescreen (not caused by anything particular as I recall), none of the usb-controllers are working. (And none of the devices connected to those usb ports). All the controllers are showed up in the device manager, but every one has a warning-icon (as they are not functioning properly). The windows identifies them correctly, it shows exactly the model of each controller, and it says that the driver is installed. Now, when I try to reinstall the driver (Update driver menu item in the device manager), it tries to find it, finds the driver, but quits saying that the driver was found but could not be installed. Additionally, it displays "This operation requires an interactive window station", whatever that means... Now get this, the same thing happens with a new pci-usb controller card! It is found (actually each time the machine starts, it is found as new hardware), but trying to install drivers leads nowhere, I am getting the same message about an interactive window station. (tried to install drivers from the acoompanying CD) I have tried deleting those devices from device manager and let windows find them again, but that leads to same results. None of the ports on this extension card work either. This should not be a hardware problem, a usb keyboard connected to the builtin usb controller works in bios, and even in another OS running the same computer (old xp installation) What to do? Will I have to reinstall? Can deleting infcache.1 help? Is there some way to let windows remove all old drivers and try to find all hardware again, this time only looking for drivers on a windows install disk or something?

  Read the article

• Exchange Online SMTP Not Working With Any Email Client

  - by emre nevayeshirazi

  I am trying to switch our company mail server to exchange online. I have successfully added my domain and users and can send and receive mails through Outlook Web App. I can also send and receive if I configure my Outlook 2013 client using Exchange protocol. However, some folks in company are using Thunderbird and some old Outlook Clients. For those, I tried to connect to Exchange via IMAP/SMTP. This is what I use, For incoming, IMAP / Port : 993 with SSL / Host : outlook.office365.com For outgoing, SMTP / Port : 589 with TSL / Host : smtp.office365.com I can receive emails, however I could not be able to send emails. I keep getting An error occurred while sending mail. The mail server responded: 4.3.2 Service not active. Please verify that your email address is correct in your Mail preferences and try again. My username and password are correct, I am using my mail address as my username to mailbox. I also tried sending mail via C# application which was working for outlook.com and gmail.com SMTP settings. It also fails to send emails and returns the same error code. I thought TB and other old clients such as Office 2003 might not support Exc. Online so I tried same settings in Office 2013. It successfully connected my mailbox when checking for configuration but failed in sending test message and returned the same error code. Configuration for incoming and outgoing mailbox are taken from here. They are also available on Office 365 user page and they are same. What could be the reason for error ?

  Read the article

• Integrated Graphics went kaput, can I switch to dedicated graphics if I can't get into the BIOS

  - by Om Nom Nom

  I have an 8 year old computer (Pentium 4 1.6 GHz, 256 MB DDR RAM) which is not turning on (it beeps for 10 seconds and then goes off). Nothing appears on the screen, so I can't get into the BIOS. A computer repair person listened to the beeping pattern and told me that its because of the integrated graphics on the motherboard is defective. It's an ASUS P4S333-VM motherboard and the graphics solution is SiS 650. He tried putting in a PCI graphics card expecting that the computer will use that instead and ignore the integrated graphics, but apparently older computers don't switch automatically to the dedicated graphics card; it needs to be changed from the BIOS. But, I can't get inside the BIOS settings as I already said. I am told that the only option now is to replace the motherboard (which is not feasible since it's very old now). So, is there any way to make the computer use the PCI graphics card? IIRC, the motherboard also has an AGP port, but I think that it will also need to be selected from the BIOS?

  Read the article

• Physical-to-virtual for personal use

  - by Journeyman Geek

  One of my current projects involves reducing the number of old computers lying around. So far, the office systems have been downsized from 5 to 2. One system which had no data on it was dumped entirely, while three other identical boxes were consolidated into to one (I swap hard drives as needed and they just work(tm)). I want to make further cuts. The physical systems in question all run windows xp sp3, and were old Pentium 4s with 256 MB of RAM. Currently, I have got a VirtualBox running on another system. My intention is to migrate all services to that. We can assume that disk space and RAM on the host is not an issue. I'd rather not go with a client-server physical-to-virtual (P2V) method like what VirtualBox uses now. I have a few specific concerns as well - specifically whether I'd need to reactivate or sysprep for dissimilar hardware first. An offline tool for imaging (Windows or Linux) would not be an issue since the drives could be mounted onto another system I have anyway or I could use a LiveCD. What would be my options for P2V conversion, and what would I need to keep in mind when doing this?

  Read the article

• Eclipse: Slow startup time

  - by ct2k7

  Hello, I've got Eclipse 3.6.1 on my MacBook Air (2010), and I'm getting slowish startup times. Well, slow, compared to my Desktop, which is somewhat less powerful and a few years old). The startup generally takes 15 seconds, and of this, 4 is spent just on the Eclipse splash screen, before Eclipse loads anything. No projects are open at startup. Here's a copy of my eclipse.ini. -startup ../../../plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar --launcher.library ../../../plugins/org.eclipse.equinox.launcher.cocoa.macosx.x86_64_1.1.1.R36x_v20100810 -showsplash org.eclipse.platform --launcher.XXMaxPermSize 512m --launcher.defaultAction openFile -vmargs -Xms256m -Xmx512m -Xdock:icon=../Resources/Eclipse.icns -XstartOnFirstThread -Dorg.eclipse.swt.internal.carbon.smallFonts -Dosgi.requiredJavaVersion=1.6 -Xverify:none -XX:+UseConcMarkSweepGC -XX:+CMSClassUnloadingEnabled -XX:+CMSPermGenSweepingEnabled -XX:+UnlockExperimentalVMOptions -XX:+AggressiveOpts -XX:+StringCache -XX:+UseFastAccessorMethods -XX:+UseLargePages -XX:LargePageSizeInBytes=4m -XX:AllocatePrefetchLines=1 -XX:AllocatePrefetchStyle=1 -Dide.gc=true The problem doesn't seem to be related to plugins - I've disabled the ones which I don't need, and regardless of this configuration or whether all of them are selected on startup, it only takes 1second to load the plugins. I'm running Eclipse 3.6.1 Cocoa x64 build (vanilla) with the Zend Studio plugin. The machine has 4GB RAM, an SSD with over 64% free space, 1.6GHz (4MB L2 Cache). OS is Mac OS X 10.6.6, latest Java available, 1.6. For comparison, my Desktop, an old P4 3GHZ (512K L2 Cache) with a 7200RPM drive, under 40% free space, Eclipse (same config) loads in under 7 seconds, consistently. Note, this one is a Windows machine, with latest Java installed.

  Read the article

• samba "username map" stopped to work

  - by Kris_R

  It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user Kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems. p.s. i've asked this question at serverfault but no answer came. Maybe I have more luck with this forum. Sorry for duplicate if any of you reads both.

  Read the article

• Driver issue for 7850 HD Diamond Windows 7

  - by Mr.Student

  I have an issue with windows 7 implementing the drivers ati provides for my 7850 HD Diamond video card. The video card is plugged in correctly to the PCIE 2.0 slots of my motherboard (p6t asus) with more then enough power. Fortunately the card works as I have my monitor plugged into the card itself and I can see just fine. However windows 7 does not replace the standard vga default microsoft driver with catalyst drivers that I've tried installing from online as well as the CD. Every time I install the drivers using Catalyst Install manager it always finishes with "Install complete(Warnings occured)". I then see the warnings it has which it instead reports that it successfully installed the SDK, Catalyst Install Manager, and HDMI/AUDIO packages. When I check my device manager after that, the display adapter still shows as standard vga and that its still using microsoft default display adapter. Now this current card is replacing an old card of mine which is the ATI 4890 HD which works beautifully. In fact for the old card to work, all I need to do is go to device manager and right click on standard vga - click update driver and windows 7 magically finds the correct driver to install and everything is good. Not so with the new card. I've even went into my regedits and uninstalled every bit of ati driver software before reinstalling my new card. Nothing's worked thus far. I've already exchanged my card out once and talked to customer support from my motherboard, microsoft, and ati all blaming the other. Please help me out!!

  Read the article

• Very strange networking problem in all computers in my house

  - by Anthony

  I have three computers in my house: One desktop (wired), and two laptops (wireless). I'm using Cox Communications (yes they suck), and yesterday they had a major outage. I know it was them because I called them up when I started losing connection to the internet. All the computers can connect just fine, but they don't have internet access. It just says "local only". The weird thing is, some of them work occasionally. For the first day my laptop was working perfectly, while all the other computers couldn't connect. Later on in the day it got reversed, and the desktop was the one with internet access. By the second day the problem on Cox's end was fixed, but we still had no access. I called them up and they reset my modem, and did the usual troubleshooting stuff. It never fixed the problem, but we found out that the problem had to do with conflicting IP addresses. My router was a Linksys WRT54G and it was about 5 years old. I figured it might have gotten damaged from the outage since it was so old, and now it's having trouble "fixing itself" and giving out the proper IP addresses. So I bought a new router, a Cisco Linksys E1000. I set everything up, and still the same problem. My computer has access right now (that's how I'm writing this), but no other computers seem to be able to get access. Is there possible damage to the modem? Can someone help me please? Sorry for this being so long.

  Read the article

• Repository bugzilla package changed to bugzilla3 in Lenny; upgradable?

  - by Pukku

  This question was asked in debianhelp.org almost half a year ago, but never got an answer. I wasn't the one who posted it, however I was today facing exactly the same question. Not sure if copying it to here as such is considered as inappropriate or something, but there's not really anything that I would even like to paraphrase... So let's just go. (I'm sure you will be happy to close it, if this is not the way to go :) Hello all! We are using a Bugzilla server install on a Debian 4/Etch server and are starting to look at the upgrade to Debian 5/Lenny. I was hoping to upgrade the existing Bugzilla server and database from the oldstable (v2.22) to the newer stable in Lenny (v3) when we get to doing a dist-upgrade. However from testing in a virtual machine it seems that the old package was called "Bugzilla" whereas the Lenny package is called "Bugzilla3" and I could not figure a way to directly upgrade between the two. Is it possible to establish some kind of upgrade path quickly after the dist-upgrade to minimise downtime using apt-get or aptitude? Going on past experiences I would not want to do a fresh install with the Bugzilla3 package and attempt to inject the old database into it (previous attempts failed miserably!) :(

  Read the article

• Failed to connect from slave to master with error "error connecting to master (1045)"

  - by Victor Lin

  I try to setup replication from slave to the master. CHANGE MASTER TO MASTER_HOST = 'master', MASTER_PORT = 3306, MASTER_USER = 'repl', MASTER_PASSWORD = 'xxx'; And I did grant privileges to the user on master. I can connect with mysql command from slave machine to the master mysql -h master -u repl -p mysql> show grants; GRANT RELOAD, SUPER, REPLICATION SLAVE, CREATE USER ON *.* TO 'repl'@'xxx' IDENTIFIED BY PASSWORD 'xxx' mysql> select 1; +---+ | 1 | +---+ | 1 | +---+ 1 row in set (0.04 sec) As you can see, privileges are correct, connection works fine, but however, the connection for replication to master always failed. mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Connecting to master Master_Host: master Master_User: repl Master_Port: 3306 Connect_Retry: 60 Master_Log_File: Read_Master_Log_Pos: 4 Relay_Log_File: slave-replay-bin.000002 Relay_Log_Pos: 4 Relay_Master_Log_File: Slave_IO_Running: Connecting Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 0 Relay_Log_Space: 107 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 1045 Last_IO_Error: error connecting to master 'repl@master:3306' - retry-time: 60 retries: 86400 Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 0 1 row in set (0.00 sec) Is this caused by different version of MySQL server? The version of master is 5.0.77, and the slave is 5.5.13. But all articles I could find tell me that it's okay to replicate from a newer slave to old master. How to solve this problem? -- Update -- I even try to upgrade the old MySQL, but still, the problem is not solved. mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Connecting to master Master_Host: master Master_User: repl Master_Port: 3306 Connect_Retry: 60 Master_Log_File: master-bin.000007 Read_Master_Log_Pos: 107 Relay_Log_File: slave-replay-bin.000001 Relay_Log_Pos: 4 Relay_Master_Log_File: master-bin.000007 Slave_IO_Running: Connecting Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 107 Relay_Log_Space: 107 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 1045 Last_IO_Error: error connecting to master 'repl@master' - retry-time: 60 retries: 86400 Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 0 1 row in set (0.00 sec)

  Read the article

• undelete big files - mission impossible?

  - by johnrembo

  Hi, I've accidentaly deleted outlook.pst (6.7GB) file, while there was only 400MB free space left on primary NTFS partition (winxp). I've tried several recovery tools to get this file back. "Ontrack Easy Recovery Pro" found 0 pst files (complete scan mode), while "Recover My Files" in sector scan mode found 5 pst's, but 4 of them of sizes from 3 to 28 KB, while the 5th one - 1Gb. I've managed to succesfuly recover 1Gb pst file, which was 1 year old copy (the one used after the latest windows reinstall). Now, I'm frustrated and confused Why 1 year old file was succesfuly recovered if there were only 400MB left on primary partition? Where's 6.7GB file gone? I did some reading (i.e. here), and it seems that there's almost no probability to retrieve the file I'm looking for, but wait - none of recovery tools i've used found zero-sized pst file, moreover - if due to fragmentation a file might be corrupted - we could use scanpst.exe to fix some errors and survive with 10 or 100 emails missing - whatever. Could you please recommend some more sophisticated recovery tools for this particular task? Appretiate your help - thanks in advance

  Read the article

• Built local glibc, broke system, how do I ssh without parsing the .bashrc?

  - by Mikhail

  The cluster I am on had really old build tools and I needed to use CUDA5. I'm a pretty clever dude and I planned on building the necissary tools. So, I built a local copy of gcc, bintools, and glibc. Everything a CUDA5 could want. All builds finished without error. and I tested gcc and bintools. Everything was wonderful and I built and ran a few of the programs. I set up the LD_LIBRARY_PATHs in the .bashrc and logged back in, expecting a productive night ahead. To my horror I realized that everything is dynamically linked. Now I can't do simple commands like ls [ex@uid377 ~]$ ls ls: error while loading shared libraries: __vdso_time: invalid mode for dlopen(): Invalid argument and I can't do commands to fix the problem like rm or vim! Is there a way for me to ssh but also to ignore .bashrc file? Any suggestions are much appreciated. This machine is obviously under maintained and I don't know when I could have administrator support.

  Read the article

• Port forwarding on D-Link DIR-615 super-slow, useless

  - by Jaroslav Záruba

  Hello I have replaced my old router with DIR-615 from D-Link, and now the port forwarding is so slow it makes the router practically useless for requests coming from outside of my network. Accessing the router itself (admin UI) from outside is without any issues, no delay whatsoever. But when I try to access a service residing on any of the computers in my network from outside the requests take minutes and minutes. (E.g. I can see source of my GWT-app main page, but loading additional CSS and JS files takes years.) If anyone could recommend any further diagnostics I should do to figure out what is happening it would be great. Few notes: happens with more services (web-app on Tomcat, viewing directory index via Apache) it does not make a difference whether the service is hosted on wired or wireless PC accessing the service on a localhost works fine, as does any 'inner' communication turning off firewall on target PC does not make difference either (makes sense) when I replace this router with the old one (both 192.168.1.1) everything works fine I see nothing suspicious in the router's log I believe I have the latest firmware (4.11) DIR-615 sucks, it already died once completely Regards Jarda Z.

  Read the article

• linux + create host file from CSV file by sed or awk or perl

  - by yael

  I have the following CSV file this file defined which Linux machine exist in the system and there ip's my target is to create host file from this file please advice how to create host file as example 1 from my CSV file ( I need to match the IP address from CSV file and put it on the first field of the host file , then match the LINUX name and locate this name in the sec field – as example 1 ) remark - should be performed by sed or awk or perl .. , I need to write the solution in my bash script CSV file , machine , VM-LINUX1 , SZ , Phy , 10.213.158.18 , PROXY , VM-LINUX2 , SZ , 10.213.158.19 , OLD HW , VM-LINUX3 , SZ , 10.213.158.20 , , VM-LINUX4 , SZ , Phy , 10.213.158.21 , , VM-LINUX5 , SZ , Phy , OUT , EXT , LAN3 , 10.213.158.22 , INTERNAL , VM-LINUX6 , SZ , Phy , 10.213.158.23 , , server , new HW , VM-LINUX7 , SZ , Phy , 10.213.158.24 , OUT, LAN3 , VM-LINUX8 , SZ , 10.213.158.25 , OLD HW , machine , VM-LINUX9 , SZ , Phy , INT , 10.213.158.26 , LAN2, AN45, , VM-LINUX10 , SZ , Phy , 10.213.158.27 , , VM-LINUX11 , SZ , Phy , LAN5 , 10.213.158.28 , example 1 ( host file ) 10.213.158.18 VM-LINUX1 10.213.158.19 VM-LINUX2 10.213.158.20 VM-LINUX3 10.213.158.21 VM-LINUX4 10.213.158.22 VM-LINUX5 10.213.158.23 VM-LINUX6 10.213.158.24 VM-LINUX7 10.213.158.25 VM-LINUX8 10.213.158.26 VM-LINUX9 10.213.158.27 VM-LINUX10 10.213.158.25 VM-MACHINE8 10.213.158.26 STAR9 10.213.158.27 TOP10 10.213.158.28 SERVER11

  Read the article

• Remote Desktop *from* Windows 2008 R2 Server

  - by freefaller

  Summary: how do I create an RDC connection from a Windows 2008 server to another server? Our client will only allow us to connect to their server via a static IP address (which is fair enough), but unfortunately as we're a very small company we don't have one in the office. As a work around, we had the connection working through our old Windows 2003 server (dynamic-cloud from 1and1). .. however we have just rebuilt the server to run under Windows 2008 R2 (don't ask, but it was necessary), and now I simply cannot get the connection working. I have added an "Outbound Rule" to Windows Firewall with Advanced Security (TCP, All local ports, 3389 remote port - I have also tried the other way around). I have added a packet filter IP security rule with the same details. The 1and1 firewall rules (through their online control panel) allows for 3389 TCP and UDP. But it is simply not connecting (yes, the server is definitely on and able to accept connections) with the general error of... Remote Desktop can’t connect to the remote computer for one of these reasons: 1) Remote access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Is there anything obvious I've missed - or something I can use to find out where the request is being blocked? The new server is using the exact same IP address as before, so I don't believe that would be an issue. Unless it's trying to use an IPv6 address rather than the old IPv4 address that it was before? I apologise that I am not a network person by trade, but I know more than anybody else in my office!!

  Read the article

• samba "username map" stopped to work after upgrade to 3.6

  - by Kris_R

  It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems.

  Read the article

• Laptop won't boot with both memory slots used

  - by Johnny W

  I'm currently trying to upgrade my old Sony Vaio VGN-SZ1HP/B to 2GB of RAM. It already had 1GB of Crucial RAM in one of its slots, and one empty. I checked on Crucial.com and it confirms that each bank can hold 1GB of PC2-5300. The 1GB stick already installed was this, but Crucial's page recommended this... The two are identical from what I can make out, so I just ordered another one of the former. Unfortunately the machine refuses to even POST with both sticks installed. If I remove the old RAM from Slot 1 and replace it with the new RAM it runs fine. If I leave Slot 1 empty and put RAM (either stick) in Slot 2, it won't POST. Basically it seems that Slot 2 just isn't working properly. Does anyone have any ideas on how to solve this problem? Or maybe have any experience with this sort of thing with Sony Vaios? Thanks for any help!

  Read the article

• Windows Virtual Machines will not run

  - by jlego

  I'm trying to setup a few virtual machines to use for testing websites in the various old versions of IE. I had Microsoft Virtual PC working on an older machine using XP mode and 2 other VHD's from Microsoft that allowed me to test in IE6-IE8. I've recently gotten a new work machine and am trying to set up the VMs again for testing, however nothing seems to be working. Both the old and the new system run Windows 7 64-bit Ultimate with AMD processors. I downloaded Virtual PC & XP mode from here http://www.microsoft.com/windows/virtual-pc/download.aspx and go through the installation process. XP mode is installed, but when I try to run it it goes through the initial setup process only to fail when it is almost complete with the error "Cannot Complete Setup". (After googling I see that this might be a conflict with my processor) I download other VHD's from here http://www.microsoft.com/windows/virtual-pc/download.aspx in order to get the other versions of IE and try to set those up in Virtual PC as well. I click on them to start the machine and both Windows 7 with IE8 and Windows Vista with IE7 just hang at a black screen. I try to use Virtual Box instead, and I get Windows XP with IE6 running, but I have no internet connection in the VM. I try all different settings and try to google the correct settings but nothing seems to work. When I load the VM, XP shows that its found new hardware but it needs the drivers. One of these pieces of hardware is the network adapter, but I can't connect to the internet to download the driver in the guest OS. VirtualBox tells me I need to install extensions in order for things to function properly. I go through the installation process in the guest OS and restart the VM, however now XP is asking for validation and I can't access the VM. I try installing the other 2 OS (Vista & 7) but I get a BSOD right after the startup screen appears and the VM restarts itself. I'm getting so frustrated trying to make this work, I would really appreciate any assistance on getting the VMs up and running or any alternatives for testing websites in Internet Explorer.

  Read the article

• Why are Microsoft Windows Update taking so long to install?

  - by Mathieu Pagé

  Hi, I have a question that is not related to a problem I have. Just something I'd like to understand. Why are Windows update so long? First Windows Update need to find witch updates you needs and this take about 5 minutes. What is happening behind the scene during those 5 minutes? I would have tought that it would be enough to compare the updates you already have to the complete list of updates or to check the version numbers of a couples files. Then when it comes time to install the upgrades, they're also taking a long time. Some 1 Mb updates takes 2, 3 or 5 minutes to install. What is taking so long. I would have though that it was simply a mater of backup the old file, uncompress the new files, replace the old file. This should be really fast. Is Windows doing something else? For comparison, under Linux, you can find which updates you need in about 20 seconds and installing them is usually pretty fast (The time to uncompress the files). I can do a complete updgrade of my linux machine in about 25 minutes (download 600-800 Mb of updates, hundreds of them and install them) while under windows 25 minutes is the time it needs to find witch update are needed and install about 5-10 updates. I just updated a Windows XP home from SP1a to SP3 + all other updates. It took me more than 3 hours. Doing something like that in the Linux World takes about 30 minutes. I don't want to bash Microsoft here. I genuinly want to know what they do differently that makes it so long.

  Read the article

• Error regarding DNS - "... must be able to resolve names ..." (Windows Server 2008 R2 installation)

  - by Scolytus

  I'm trying to replace our old Windows 2000 Server by a Windows Server 2008 R2. I followed the guide at MSDN. Coming to the step "Install Active Directory Domain Services..." the option to install the DNS-Server was grayed-out. According to Microsoft Support I skipped the DNS Server Installation at this point. (Because of the single-label DNS name) I then installed the DNS-Server role and created a forward-lookup-zone for the domain. When running the Best Practices Analyzer of the DNS-Server role I get these two messages for both domain controllers (the old win2k and the new win 2008 R2): The DNS server [IP address] on [adapter name] must be able to resolve names in the primary DNS domain zone The DNS server [IP address] on [adapter name] must be able to resolve names in the forest root domain name zone The TechCenter articles suggest to use a proper DNS Server - that's pointless when I try to configure a proper DNS Server. How do I configure the DNS Server in a way that it resolves these zones? Or are these errors irrelevant? dcdiag /v /test:DNS Seems to run fine...

  Read the article

• Adding new SPNs to existing service ids

  - by jmh

  We have a tomcat server using spring-security kerberos to authenticate users to the webpage against active directory. There are around 25 domain controllers. The site has two CNAME based DNS aliases. The site currently has one Service ID with SPNs registered for the DNS A record as well as each of the CNAMEs. While everything is working right now, I don't know how to reliably change this configuration without possible downtime. The reason is that clients cache kerberos tickets: http://www.juniper.net/techpubs/en_US/uac4.2/topics/concept/user-role-active-directory-about.html The 'kerbtray.exe' program is helpful for viewing and deleting Kerberos tickets on the endpoint. Old tickets must be purged from the endpoint if SPNs are updated or passwords are changed (assuming the endpoint still has a cached copy of the ticket from a prior SPNEGO request to the MAG Series device. During testing, you should purge tickets before each authentication request. Description of "klist" program used to inspect/delete cached tickets: http://technet.microsoft.com/en-us/library/hh134826.aspx So if each of the clients (users running windows) who connect to my web server have kerberos tickets that become invalid as soon as I update the SPNs or passwords, how do I ensure changes are seamless? Are there any operations that can be done safely? I can't just ask all of the users to install klist and delete their old tickets.

  Read the article

• Why does the screen resolution of 1440x900 suddenly disappear from Intel GMA Control Panel?

  - by GeneQ

  I'm using a Vostro 1200 laptop with the Mobile Intel(R) 965 Express Chipset powering its graphics and running Vista 32-bit SP2. I've been using the Vostro with a Dell SE198WFP LCD Monitor as the external display since day one for about two years without any problems. Recently, I plugged the Vostro into a couple of other monitors. The problem is, now the native resolution for my main monitor's (the SE198WFP) resolution of 1440x900 @ 60 Hz is no longer available. (See below) I've tried everything from uninstalling and reinstalling the Intel drivers as well as the monitor drivers to no avail. I've goggled this problem and it appears that this has happened to other people but all the answers involve people giving up in frustration or reinstalling; both terrible outcomes. Has anybody ever figured why this happens and have a good solution? UPDATE: This dude has a complicated solution, which I haven't tried yet. His explanations for the problem was After an exausting search for an answer to the matter of why my brand new 19? widescreen monitor’s native resolution (1440×900) was unavailible (sic) in the display properties, I finally stumbled upon an article a person posted on Intel’s forums that basically explained what shannanigans Intel had been up to with their GMA 950 line of onboard graphic solutions. Not very comforting.

  Read the article

• Is it possible/practical to install and run Linux on a USB flash drive?

  - by Graeme Donaldson

  I'm going to replace my old 2004 vintage desktop PC soon and I have an idea of what I want to do, I'm just not sure if it's possible or realistic. In the time since I built the old PC it has slowly become less used as a PC and more as a file server, so I figured I'd build a small file server which could also function as a router/DHCP/DNS/whatever box. The idea is to base it on an Atom system. I have my eye on the Intel D510MO for the moment. This supports 2 SATA disks, and I'd prefer to dedicate those to data storage. I'd like to install Ubuntu Server or maybe Debian on a 8/16GB USB flash drive. I have seen plenty of tutorials on how to perform an installation from a USB drive, but I can't seem to find any info on actually booting and running the OS from USB flash. Is this even possible? Is it practical? This box will mostly be used for: Making backups of mine and my wife's notebooks via LAN. Will use SMB or NFS for this. Digital media storage, which will be accessed by a Mede8er box with no storage of its own. I will most likely use NFS for this.

  Read the article

• Error upgrading Ubuntu server from Intrepid to Jaunty

  - by Martin

  I'm trying to upgrade an old ubuntu server from 8.10 (Intrepid) to 9.04 (Jaunty). But it fails. root@server1:/# do-release-upgrade Checking for a new ubuntu release Failed Upgrade tool signature Failed Upgrade tool Done downloading extracting 'jaunty.tar.gz' Failed to extract Extracting the upgrade failed. There may be a problem with the network or with the server. Does anyone have an idea why I get this error and how to fix it? UPDATE: I think i might have tracked the problem down. My /etc/update-manager/meta-release looks like this: [METARELEASE] URI = http://changelogs.ubuntu.com/meta-release URI_LTS = http://changelogs.ubuntu.com/meta-release-lts URI_UNSTABLE_POSTFIX = -development URI_PROPOSED_POSTFIX = -proposed If i go to http://changelogs.ubuntu.com/meta-release it has this info for Jaunty: Dist: jaunty Name: Jaunty Jackalope Version: 9.04 Date: Thu, 23 Apr 2009 12:00:00 UTC Supported: 0 Description: This is the 9.04 release Release-File: http://archive.ubuntu.com/ubuntu/dists/jaunty/Release ReleaseNotes: http://changelogs.ubuntu.com/EOLReleaseAnnouncement UpgradeTool: http://archive.ubuntu.com/ubuntu/dists/jaunty-proposed/main/dist-upgrader-all/0.111.8/jaunty.tar.gz UpgradeToolSignature: http://archive.ubuntu.com/ubuntu/dists/jaunty-proposed/main/dist-upgrader-all/0.111.8/jaunty.tar.gz.gpg Those links starting with archive.ubuntu.com are broken since jaunty is EOL. I guess i could fix this by copying this file, replacing "archive" with "old-releases", host the modified file somewhere and change the url in the meta-release file. Is this a good solution or will it make me run into worse problems?

  Read the article

• Combining URL mapping and Access-Control-Allow-Origin: *

  - by ksangers

  I am in the progress of migrating an old banner system to a new one and in doing so I want to rewrite the old banner system's URL's to the new one. I load my banners via an AJAX request, and therefore I require the Access-Control-Allow-Origin to be set to *. I have the following VirtualHost configuration: <VirtualHost *:80> ServerAdmin [email protected] ServerName banner.studenten.net # we want to allow XMLHTTPRequests Header set Access-Control-Allow-Origin "*" RewriteEngine on RewriteMap bannersOldToNew txt:/home/user/banner.studenten.net/banner-studenten-net-to-ads-all4students-nl-map # check whether a zoneid exists in the query string RewriteCond %{QUERY_STRING} ^(.*)zoneid=([1-9][0-9]*)(.*) # make sure the requested banner has been mapped RewriteCond ${bannersOldToNew:%2|NOTFOUND} !=NOTFOUND # rewrite to ads.all4students.nl RewriteRule ^/ads/.* http://ads.all4students.nl/delivery/ajs.php?%1zoneid=${bannersOldToNew:%2}%3 [R] # else 404 or something ErrorLog ${APACHE_LOG_DIR}/banner.studenten.net-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/banner.studenten.net-access.log combined </VirtualHost> My map file, /home/user/banner.studenten.net/banner-studenten-net-to-ads-all4students-nl-map, contains something like: # oldId newId 140 11 141 12 142 13 Based on the above configuration I was expecting the following: GET /ads/ajs.php?zoneid=140 HTTP/1.1 Host: banner.studenten.net HTTP/1.1 302 Found ... Access-Control-Allow-Origin: * Location: http://ads.all4students.nl/delivery/ajs.php?zoneid=11 But instead I get the following: GET /ads/ajs.php?zoneid=140 HTTP/1.1 Host: banner.studenten.net HTTP/1.1 302 Found ... Location: http://ads.all4students.nl/delivery/ajs.php?zoneid=11 Note the missing Access-Control-Allow-Origin header, this means the XMLHttpRequest is denied and the banner is not displayed. Any suggestions on how to fix this in Apache?

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >