Search Results

Search found 18422 results on 737 pages for 'down town'.

Page 113/737 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

  • Router not assigning an IP address after installing OS X 10.6

    - by Vaibhav Bajpai
    I recently installed Mac OS X 10.6, however the ethernet state is down. The assigned IP is 169.x.x.x. When booted the live USB of Ubuntu, I properly get an IP assigned in the range 192.168.1.x from the router 192.168.1.1 I am using the same router and same ethernet line. I tried to ping to 192.168.1.1 from my Mac and I get a host down message. I tried to manually assign the IP and set the router IP to 192.168.1.1 but still the router is unreachable.

    Read the article

  • Issue with increasing the root partition from the swap

    - by user211761
    I have an issue with increase the size of my root partition. I have ElementaryOS Luna, and while installing it asked me how much space I want to use. I choosed 15 GB for it, because I want to use this as an alternative system. The issue is that after the installation was complete, I found out that my root partition is only 7 GB big, and SWAP is 8 GB which is useless cuz I have 8 GB of RAM. Now I want to shrink the swap and increase the size of my root partition, so I booted the LiveCD and used GParted. I shrinked the swap without any problems, but now I cant add that free space to any partition. I also turned Swap off. I would add a picture, but I need at least 10 reputation to post images ( Stupid ) Its also worth mentioning that in Gparted its showing my partition in a different way. I would post an image BUT I CANT, so I need to write it down. Its something like this [Pointing arrow down] /dev/sda4 Extended /dev/sda5 ntfs /dev/sda6 ext4 (Which is my main partition) /dev/sda7 linux-swap unallocated Picture:

    Read the article

  • How can I make Chrome work more like Firefox?

    - by rhooligan
    After Firefox broke my add-ons yet again, I decided to give Chrome a second look. To my surprise all the add-ons are available. What I am missing though is the drop-down search bar. First, I've disabled the search from the location bar. Now I want to add a combo box that is always visible where I can select the engine to do searching. I downloaded a search extension (Search Box), but it's an icon that needs to be clicked before you can interact with it: TL;DR; I want a box that is always visible and can change the search engine from a drop-down. Is there an extension like this available in Chrome?

    Read the article

  • ADSL improvement in recent years

    - by cleong
    Currently I have a 2mb/s ADSL connection. I signed up for the service more than five years ago. Has technology improved much during that time to allow for greater speed using the same wires? The building I live in is quite old and the lines aren't very good. They weren't able to support 6mb/s service back then. Now I notice that the lowest speed offered by my telco is 10mb/s. Even that would be a serious improvement over what I have now. Here are the stats from the modem: Line Attenuation (Up/Down) [dB]: 10,5 / 15,5 SN Margin (Up/Down) [dB]: 31,5 / 29,0

    Read the article

  • Using Queries with Coherence Read-Through Caches

    - by jpurdy
    Applications that rely on partial caches of databases, and use read-through to maintain those caches, have some trade-offs if queries are required. Coherence does not support push-down queries, so queries will apply only to data that currently exists in the cache. This is technically consistent with "read committed" semantics, but the potential absence of data may make the results so unintuitive as to be useless for most use cases (depending on how much of the database is held in cache). Alternatively, the application itself may manually "push down" queries to the database, either retrieving results equivalent to querying the cache directly, or may query the database for a key set and read the values from the cache (relying on read-through to handle any missing values). Obviously, if the result set is too large, reading through the cache may cause significant thrashing. It's also worth pointing out that if the cache is asynchronously synchronized with the database (perhaps via database change listener), that an application may commit a transaction to the database, then generate a key set from the database via a query, then read cache entries through the cache, possibly resulting in a race condition where the application sees older data than it had previously committed. In theory this is not problematic but in practice it is very unintuitive. For this reason it often makes sense to invalidate the cache when updating the database, forcing the next read-through to update the cache.

    Read the article

  • Create a rectangle struct to be rotated and have a .Intersects() function

    - by MintyAnt
    In my XNA program, I am trying to swing a sword. The sword starts at an angle of 180 degrees, then rotates (clockwise) to an angle of 90 degrees. The Rectangle struct that XNA provides, Rectangle mAttackBox = new Rectangle(int x, int y, int width, int height); However, this struct has two problems: Holds position and size in Integers, not Floats Cannot be rotated I was hoping someone could help me in either telling me that i'm wrong and the Rectangle can be used for both these methods, or can lead me down the right path for rotating a rectangle. I know how to create a Struct. I believe that I can make methods like classes. I can determine the 4 vertices of a 2D rectangle by calculating out the x,y of the other 3 given the length, width. I'm sure theres a Matrix class I can use to multiply each point against a Rotation matrix. But once i have my 4 vertices, I got two other problems: - How do I test other rectangles against it? How does .Intersects() work for the rectangle struct? - Is this even the fastest way to do it? I'd be constantly doing matrix multiplication, wouldnt that slow things down?

    Read the article

  • It Ain't Over 'Til It's Over

    - by Oracle OpenWorld Blog Team
    Oracle OpenWorld 2012 is behind us. Well, for San Francisco, anyhow. The team is already working on the Latin America event which takes place in December in Sao Paulo, and an OpenWorld in Asia for 2013 as well. And of course they're already working on the next San Francisco OpenWorld for 2013. So what happens after the conference is over? People pack up demo and network gear and ship it out to wherever it's going next; take down and recycle signage; strike the keynote set, the exhibition and demo halls, the street tents, and anything else that was constructed just for the conference. There's a lot of post-conference analyis going on too. Oracle and partner marketing teams are looking at and following up on the leads they got from booth, demo, and lounge traffic. The events team is evaluating the session and conference surveys you filled out if you attended -- looking to identify the best speakers, what worked and didn't work, how you liked the venues, the food, the entertainment, the presentations. From all of that information will come recommendations for next year on what to keep doing, what to do better, and what not to do at all. The goal for each year's conference is to be better than last year's. If you attended and haven't filled out the surveys yet, you have until October 19 for them to be counted, and for you to be entered into a daily sweepstakes. Click here for more information. Posts to this blog will slow down for a while, but we'll post news about Oracle OpenWorld in San Francisco and around the world when we have it. Any suggestions about future blog topics are welcome. Oh - I forgot to mention that you can sign up to be notified when registration for Oracle OpenWorld 2013 goes live. If you register at that time you'll get the best discount available on attending next year. So sign up, and stay tuned.

    Read the article

  • How do I optimize a high traffic Wordpress website?

    - by mha
    Hello, I am running a wordpress based site which is now hosted on (mt) under DV-Extreme package 2GB+256MB addon RAM. It a muti author site where people are engaged in writing posts, comments, updating status etc. According to Google Analytics this month traffic Visitor = 45,764 Pageview = 1,051,186 Visit = 141,447 I have cdn my site, compress the css, used w3 Total cache plugin to optimize my site. Since last month I am getting several down notice from Pingdom. Right now I am facing more down alert than before. And have to restart my site several time to up again. Is my hosting resource is not enough? Do I need more resource? or what could be the solution? Helpful suggestion will be appreciated. Thanks.

    Read the article

  • Combine OS partion with data partition on NAS4Free/FreeNAS

    - by Pak
    I recently built a NAS4Free (formerly FreeNAS) machine using a 256MB (yes, MB) USB drive for the OS. When I did the original install, I had the bright idea of making the OS partition just big enough for the OS and a then creating a second partition using the remainder of the drive to store stuff pertaining to the OS. I never really found a use for the data partition and I ended up running out of space on the OS partition, so now I'd like to combine the partitions into a single partition. Is this something that is possible to do while everything is up and running? If it comes down to it, I can take down the machine and do a fresh install of the OS using the entire space of the USB drive, but I'd like to use this as an opportunity to better familiarize myself with FreeBSD/UNIX type systems. If this is possible, will it interfere with the NAS4Free things? The data partition shows up in the web interface under the disks section. If I end up manually changing the partitions, I'd be concerned with NAS4Free getting confused by the missing partition.

    Read the article

  • changing desktop background picture from stretch on Windows 7

    - by nird
    I have a brand new Windows 7 laptop, I've changed the desktop background picture using the "personalization" item of the desktop right click menu. Below the list that of images to choose there's a drop down with options "stretch", "fit", "tile", etc. When I change that from stretch to anything else nothing happens, and when I return to that dialog the drop down is still on "stretch". Anyone knows what's going on? Thanks. EDIT: apparently this is a know problem with HP/Compaq laptops.

    Read the article

  • Can't get utouch to show available wifi networks

    - by kellrobinson
    I have ubuntu touch installed on a 2014 Nexus 7. Swiping down from the wireless symbol reveals a "Network" menu with the choices Flight Mode, Wifi Settings, and Cellular Settings. Wifi Settings leads to another menu: Previous Networks, and Other Networks. Previous Networks shows a list of networks used in the past; Other Networks opens an empty box for typing in the name of a network. I don't see any way to show a list of available networks detected by the device. On rare occasions, swiping down the wireless symbol actually does bring up a list of detected networks. But most of the time ubuntu touch exhibits the behavior described above, with no apparent way to bring up the list of available wireless networks. I would like to see a list of the availble networks, if there is a way to do so. Edit: The wifi menu works properly now. Just needed a couple of reboots, it seems. I have other problems, though. If these other problems persist I will make a post specific to them. This device is a 2013 Nexus 7 4G. Not sure how to find the ubuntu version. Can't navigate the settings menu right now because it got stuck and there's no way to go back, except to reboot(!) I'll open multirom manager or boot into recovery and look for the information there.

    Read the article

  • Problem with Toshiba Mini Netbook not turning on

    - by wahle509
    This is the second time this has happened with my Toshiba Mini Netbook. When I restart it, it will shut down but then not come back up. It seems like it's running but the screen is blank and the power button is lit. The first time it happened I shut it down via the power button, then turned it back on while pressing F2 and it came up properly. Now, however, it is not doing it. The screen remains blank. What could be causing this and how do I fix it? It is running Windows XP.

    Read the article

  • Multiple Java Apps on single Server

    - by kdssea
    What is the best way to host potentially dozens of fairly trivial Java web applications on a single machine? These will be for different clients, and so having them isolated from each other is important, so that if one goes down, they don't all go down. I realize Tomcat can handle multiple apps on its own, but having them all run in a single tomcat instance sounds a little scary to me. An instance of tomcat per app also seems silly, since these apps are likely to be fairly basic. Any thoughts?

    Read the article

  • Can software operation damage an SD card?

    - by Borek
    My SD card has a broken boot sector and the tools I've tried say that it's not repairable (I've tried TestDisk, DriveRestore Pro and Easeus Partition Recovery). The card was in my Android phone and at one point, it simply shut down and I had to reboot it. After I rebooted it, the SD card was not recognized and since then I've tried to recover it (I don't want to format the card as it contains some data I'd like not to lose although it's nothing critical). My question is, can some software error in Android, or a sudden crash of a system, damage the SD card? Or was it the other way around, the card first died and it brought the system down?

    Read the article

  • APC UPS-5000 Power off remote servers

    - by Vishal
    Hi there, I have a UPS connected via the serial port to a server using PowerChute Business Edition. If a power outage occurs I would like this server to start shutting down all other servers within the network. Is there dedicated software to do this? I was thinking of creating a command file which runs a .bat file to run shut down commands to each server (using PSExec). I can set PowerChute to run this command file when a power failure occurs. Is there not anything APC provide which has this functionality and is more efficient than writing a .bat file to do this? Thanks,

    Read the article

  • wireless printer - entering WPA - is there a quicker way?

    - by camcam
    I have a wireless printer (Brother DCP-585CW). The wireless setup instruction says I should enter the WPA key to the printer. The key is entered using up and down buttons on the printer. So, I am supposed to enter 64 characters using up and down buttons. To enter 1 character, it takes on average (24+10)/2 = 17 times pressing the button (digits start after 24 letters). So 17*64 = 1088 times. Is there a quicker way to setup a wireless printer? Maybe there is a Windows program that discovers printers connected to computer through USB or Ethernet (my printer has both sockets) and allows to pre-configure it for wireless usage (enter the long WPA key)? Update There is BRAdmin program and it allows to set up almost all wireless settings... almost - all except WPA :(

    Read the article

  • Dell Inspiron7520 and ubntu 12.04 issues

    - by user91358
    I have a DELL Inspiron 7520 in the highest configuration: 3rd Generation Intel® Core™ i7-3612QM processor (6M Cache, up to 3.1 GHz) 15.6" Full High Definition (1080p) LED Display 8GB3 Dual Channel DDR3 SDRAM at 1600MHz 1TB 5400RPM SATA HDD + 32GB mSATA SSD w/Intel Smart Response Blu-ray Disc (BD) Combo (Reads BD and Writes to DVD/CD) AMD Radeon™ HD 7730M 2GB 6.09 lbs and I have installed Ubuntu 12.04 few days ago and I'm facing some issues: 1) sometimes the whole ntb freezes and I have to hold power button for 5 secs to shut it down. I think it is something with VGA and connected external monitor. I have read somewhere that it is already a reported bug, but what I am not sure about that it is doing sporadically. Sometimes it freezes right after I log in, sometime I ran few hours and then it freezes. I am using those proprietary drivers but I wasn't been able to install those with updates. 2) the next issue is the fan is quite noisy even when the ntb is almost Idle. (max 10% CPU usage). Can you recommend me some software which could do this power management to lower the noise? I have tried CPU frequency scaling indicator, but it seems that it has not any effects. 3) and issue no. 3: when I want to log out, restart or shutdown using the menu in upper right corner the upper and left trays disappear, but programs are still running and they won't close to complete log out or shutting down the OS. When I use the CLI command, it works fine. Thanks for any help you can provide.

    Read the article

  • Mac | Router not assigning the IP address.

    - by Vaibhav Bajpai
    I recently installed Mac OS X 10.6, however the ethernet state is down. The assigned IP is 169.x.x.x. When booted the live USB of Ubuntu, I properly get an IP assigned in the range 192.168.1.x from the router 192.168.1.1 I am using the same router and same ethernet line. I tried to ping to 192.168.1.1 from my Mac and I get a host down message. I tried to manually assign the IP and set the router IP to 192.168.1.1 but still the router is unreachable.

    Read the article

  • Migrate servers without losing any data / time-limited MySQL dump?

    - by inac
    Is there a way to migrate from an old dedicated server to a new one without losing any data in-between - and with no downtime? In the past, I've had to lose MySQL data between the time when the new server goes up (i.e., all files transferred, system up and ready), and when I take the old server down (data still transferred to old until new one takes over). There is also a short period where both are down for DNS, etc., to refresh. Is there a way for MySQL/root to easily transfer all data that was updated/inserted between a certain time frame?

    Read the article

  • Efficient algorithm for Virtual Machine(VM) Consolidation in Cloud

    - by devansh dalal
    PROBLEM: We have N physical machines(PMs) each with ram Ri, cpu Ci and a set of currently scheduled VMs each with ram requirement ri and ci respectively Moving(Migrating) any VM from one PM to other has a cost associated which depends on its ram ri. A PM with no VMs is shut down to save power. Our target is to minimize the weighted sum of (N,migration cost) by migrating some VMs i.e. minimize the number of working PMs as well as not to degrade the service level due to excessive migrations. My Approach: Brute Force approach is choosing the minimum loaded PM and try to fit its VMs to other PMs by First Fit Decreasing algorithm or we can select the victim PMs and target PMs based on their loading level and shut down victims if possible by moving their VMs to targets. I tried this Greedy approach on the Data of Baadal(IIT-D cloud) but It isn't giving promising results. I have also tried to study the Ant colony optimization for dynamic VM consolidating but was unable to understand very much. I used the links. http://dumas.ccsd.cnrs.fr/docs/00/72/52/15/PDF/Esnault.pdf http://hal.archives-ouvertes.fr/docs/00/72/38/56/PDF/RR-8032.pdf Would anyone please clarify the solution or suggest any new approach/resources for better performance. I am basically searching for the algorithms not the physical optimizations and I also know that many commercial organizations have provided these solution but I just wanted to know more the underlying algorithms. Thanks in advance.

    Read the article

  • Cocos2D: Change animation based on joystick direction

    - by Blade
    I'm trying to get my figure to look in the right directions, based on the input of the joystick. So if I tilt left it looks left and the left animation is used, if I used right, it looks right and right animation is used, if up, then up, down, down and so on. I just get animation for front and back. Also if I press up I see the back of the figure correctly, but it won't go back into the original state when I don't press up anymore. -(void)applyJoystick:(SneakyJoystick *)aJoystick forTimeDelta:(float) deltaTime { CGPoint scaledVelocity = ccpMult(aJoystick.velocity, 128.0f); CGPoint oldPosition = [self position]; CGPoint newPosition = ccp(oldPosition.x + scaledVelocity.x * deltaTime, oldPosition.y + scaledVelocity.y * deltaTime); [self setPosition:newPosition]; id action = nil; int extra = 50; if ((int) aJoystick.degrees > 180 - extra && aJoystick.degrees < 180 + extra) { action = [CCAnimate actionWithAnimation:walkingAnimLeft restoreOriginalFrame:NO]; } else if ((int) aJoystick.degrees > 360 - extra && aJoystick.degrees < 360 + extra) { action = [CCAnimate actionWithAnimation:walkingAnimRight restoreOriginalFrame:NO]; } else if ((int) aJoystick.degrees > 90 - extra && aJoystick.degrees < 90 + extra) { action = [CCAnimate actionWithAnimation:walkingAnimBack restoreOriginalFrame:NO]; } else if ((int) aJoystick.degrees > 270 - extra && aJoystick.degrees < 270 + extra) { action = [CCAnimate actionWithAnimation:walkingAnimFront restoreOriginalFrame:NO]; } if (action != nil) { [self runAction:action]; } } }

    Read the article

  • Is it a good practice to create a list of definitions for all symbols and words in a programming language?

    - by MrDaniel
    After arriving at this point in Learning Python The Hard Way I am wondering if this is a good practice to create a list of symbols and define what they do as noted in bold below, for every programming language. This seems reasonable, and might be very useful to have when jumping between programming languages? Is this something that programmers do or is it just a waste of effort? Exercise 22: What Do You Know So Far? There won't be any code in this exercise or the next one, so there's no WYSS or Extra Credit either. In fact, this exercise is like one giant Extra Credit. I'm going to have you do a form of review what you have learned so far. First, go back through every exercise you have done so far and write down every word and symbol (another name for 'character') that you have used. Make sure your list of symbols is complete. Next to each word or symbol, write its name and what it does. If you can't find a name for a symbol in this book, then look for it online. If you do not know what a word or symbol does, then go read about it again and try using it in some code. You may run into a few things you just can't find out or know, so just keep those on the list and be ready to look them up when you find them. Once you have your list, spend a few days rewriting the list and double checking that it's correct. This may get boring but push through and really nail it down. Once you have memorized the list and what they do, then you should step it up by writing out tables of symbols, their names, and what they do from memory. When you hit some you can't recall from memory, go back and memorize them again.

    Read the article

  • Hibernate doesn't work in Windows 7 64bit

    - by hey
    Hibernate doesn't work in Windows 7 64bit. When I try to hibernate, it just turns off computer and when I turn on it, it doesn't resume and it just starts as 'fresh' again. I updated my drivers. What is the problem? Can you give me a hand? Thank you. Come on, please help me, I really need hibernate working, 100 of my reputation will go to you. Thanks. Edit, by the way, my model is: Inspiron N5010. After I hibernate and turn on my computer, it just show Shut down didn't shut down correctly.

    Read the article

  • Wireless (Broadcom) just stopped working after putting machine to sleep!

    - by tommed
    Had the wireless working on my Dell Studio 15 for months now (Ubuntu 10.04 64bit, now 10.10 64bit). But I shut the lid this morning, which put the machine to sleep; when I openend it again the wireless would no longer connect to anything :'( I rebooted the machine, but that didn't help. I then did ifconfig eth1 {down,up}, but that didn't help, then I did iwconfig eth1 power {down,on}, but that didn't work. So I uninstalled the wireless driver (Broadcom STA) from additional drivers (reboot in the middle), but it still won't work anymore!! This is the trace from daemon.log, looks like it is a driver issue? Nov 28 12:26:39 ulap NetworkManager[1218]: (eth1): supplicant connection state: disconnected - scanning Nov 28 12:26:39 ulap NetworkManager[1218]: (eth1): supplicant connection state: scanning - disconnected Nov 28 12:26:45 ulap NetworkManager[1218]: (eth1): supplicant connection state: disconnected - scanning Nov 28 12:26:50 ulap wpa_supplicant[1295]: Trying to associate with MY_MAC_CODE (SSID='MY_WIRESS_SSID' freq=2417 MHz) Nov 28 12:26:50 ulap wpa_supplicant[1295]: Association request to the driver failed Nov 28 12:26:50 ulap NetworkManager[1218]: (eth1): supplicant connection state: scanning - associating Nov 28 12:26:51 ulap wpa_supplicant[1295]: Associated with MY_MAC_CODE Nov 28 12:26:51 ulap NetworkManager[1218]: (eth1): supplicant connection state: associating - associated Nov 28 12:27:01 ulap wpa_supplicant[1295]: Authentication with MY_MAC_CODE timed out. Nov 28 12:27:01 ulap NetworkManager[1218]: (eth1): supplicant connection state: associated - disconnected Anyone seen this, or know how I can get around this issue? It had been working fine up until now?! Even ran update-manager, but there wasn't any changes to the wireless drivers (or any related networking areas). Running the most up-to-date version of 10.10 x64. My android phone and other devices are still working on the wireless.

    Read the article

  • Uptime concerns in case of AWS outage

    - by Aditya Patawari
    I am running an Elastic Load Balancer backup by 2 instances in different Availability Zones in US East. I am using Multi-AZ RDS as well. Ideally this should ensure that if one AZ goes down, it should not effect the app because everything is spread across multiple AZs. But the recent AWS outage took the app down for a long time. I am not sure how this can happen. It would be great if someone can point out what went wrong. Major question here I have is how can I avoid this in future? I can setup app servers across different regions or even providers and use DNS for load balancing but what do I do with MySQL? Read Replicas will introduce some lag which I would want to avoid.

    Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >