Search Results

Search found 3695 results on 148 pages for 'failure'.

Page 113/148 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

• Restore a database with LDF file only

  - by Martin

  First of all, i know how stupid it is not to have a any backup. I can't help it, but i have to (try) to solve it. I have a transaction log (LDF) file from a SQL Server 2000 database that contains all transactions since the creation of the database. No truncation has been done. The MDF file is gone. Probably because of some disk failure. There is no backup. Not from the original database and not from the transaction log. I have tried to link the transaction log to a new clean database. But (ofcourse) that failed because SQL Server checks the identity of both files. I have read about software that can read the transaction log. ApexSQL seems to do that. I tried to install the trial version but it gives weird errors when trying to start the program. Anyone knows a solution for me? It may contain third party software, but i prefer a clean SQL Server solution.

  Read the article

• How do you enable webcam support in facebook for ubuntu 10.04?

  - by Jonathan

  I think I have finally arrived at an insolvable equation: Chromium v.7 + Ubuntu 10.04 + Sun Java 6 + Webcam + Facebook + Flash 10 = non-functional All of those items listed above are potential points of failure in this situation, and any help narrowing them down would be fantastic. I am simply trying to enable webcame support directly through Facebooks website. Forum searches and the usual googling turn up few posts related to this specific equation. Two of the major suggestions include: 1) Installing the Sun (I refuse to say oracle sob)-provided Java implementation instead of the OpenJDK normally installed in ubuntu. And yes, after installing it, I did update all my default supports to use the sun commands over the openjdk. 2) Somehow enabling Facebook as a permitted site to access my webcam using Flash settings. I have not been able to explore option 2 because I cannot find a way to adjust the Flash settings in chromium 7. Other factors that do not help include the fact that I am pretty sure facebook changes its webcam interface every 10 seconds just to keep troubleshooters and support personnel on their toes. If anyone has a OTP that informs us of the next shift in the app, a leak would be greatly appreciated! Cheers!

  Read the article

• On Ubuntu get: "-bash: ./flume No such file or directory" BUT flume is there and executable. Same binary OK on RHEL

  - by lcbrevard

  This is already posted in serverfault - and may be more apprpriate there. Reworked a bit from the orginal posting. We have a product built on CentOS 4 32-bit Linux that runs unmodified on 32- and 64-bit CentOS/RHEL 4 and 5 and SLES 10. It also runs unmodified on SLES 9 64-bit. [SLES 9 32-bit requires a different libstdc++.] The name of the main binary executable is 'flume' Yesterday we tried to put this on 64-bit Ubuntu 10 and, even though the file is there and the right size, we get: -bash: ./flume: No such file or directory 'file flume' shows it to be a 32-bit ELF (can't remember the exact output and the system is on an isolated network) If put into /usr/local/bin, then 'which flume' returns: /usr/local/bin/flume The file is marked as executable (did 'chmod +x flume') and lsattr shows no problems with attribute bits. I was not able to try 'ldd flume' yet. I have also not tried 'strace flume'. Currently I am with an air conditioning failure. [It's been that kind of week!] I now suspect that some library is not there. This is a profoundly unhelpful message and one I have never seen before. Is this peculiar to Ubuntu or perhaps just to this installation. We gave up and moved to a RHEL 4 system and everything is fine. But I sure would like to know what causes this.

  Read the article

• Is there any reason this cronjob would fail in cron, but not on the command line?

  - by Treffynnon

  I have written a little one liner that will email me when a list of files changes - I used sha512 to generate a list of hashes and then periodically check that those hashes still match. */5 * * * * /usr/bin/sha512sum --status -c /sha512.sumlist && echo "Success" > /dev/null || echo "Check robots.txt and index.html in /var/www as staging sites are now potentially exposed to the world and the damned googlebot" | /usr/bin/mail -s "Default staging server files have changed" [email protected] It works fine on the command line with: /usr/bin/sha512sum --status -c /sha512.sumlist && echo "Success" > /dev/null || echo "Check robots.txt and index.html in /var/www as staging sites are now potentially exposed to the world and the damned googlebot" | /usr/bin/mail -s "Default staging server files have changed" [email protected] As soon as I run it as a cronjob though it emails every time it runs with the failure message instead of only when the sha512sum check should fail. Is there something silly I have missed in a rush? I forgot to mention that I am running an Ubuntu machine.

  Read the article

• sql server uninstallation issue

  - by angel

  I'm unable to remove SQL Server 2008 sp1 completely from my system. I'm using windows 7 ultimate. Everytime I try uninstalling it i get the following error. How can I remove it? here is the log: Overall summary: Final result: Failed: see details below Exit code (Decimal): -2068643839 Exit facility code: 1203 Exit error code: 1 Exit message: Failed: see details below Start time: 2013-06-24 21:10:38 End time: 2013-06-24 21:21:17 Requested action: Uninstall Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\sql_rs_Cpu64_1.log Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22 Machine Properties: Machine name: ABHI-PC Machine processor count: 4 OS version: Windows Vista OS service pack: Service Pack 1 OS region: United States OS language: English (United States) OS architecture: x64 Process architecture: 64 Bit OS clustered: No Product features discovered: Product Instance Instance ID Feature Language Edition Version Clustered Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services 1033 Enterprise Edition 10.0.1600.22 No Sql Server 2008 Management Tools - Basic 10.0.1600.22 No Package properties: Description: SQL Server Database Services 2008 SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9} ProductName: SQL2008 Type: RTM Version: 10 SPLevel: 0 Installation edition: ENTERPRISE User Input Settings: ACTION: Uninstall CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\ConfigurationFile.ini FEATURES: RS,SSMS,SNAC_SDK,CE_RUNTIME,CE_TOOLS,SNAC HELP: False INDICATEPROGRESS: False INSTANCEID: INSTANCENAME: MSSQLSERVER MEDIASOURCE: QUIET: False QUIETSIMPLE: False X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\ConfigurationFile.ini Detailed results: Feature: SQL Client Connectivity Status: Skipped MSI status: Passed Configuration status: Passed Feature: SQL Client Connectivity SDK Status: Skipped MSI status: Passed Configuration status: Passed Feature: Reporting Services Status: Failed: see logs for details MSI status: Passed Configuration status: Failed: see details below Configuration error code: 0xFFD65603 Configuration error description: Input string was not in a correct format. Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\Detail.txt Feature: SQL Compact Edition Tools Status: Passed MSI status: Passed Configuration status: Passed Feature: SQL Compact Edition Runtime Status: Skipped MSI status: Passed Configuration status: Passed Feature: Management Tools - Basic Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Rules with failures: Global rules: There are no scenario-specific rules. Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\SystemConfigurationCheck_Report.htm

  Read the article

• Laptop seemingly randomly "freezes" to the point of no longer executing applications

  - by Aierou

  After upgrading to Windows 8 pro on my Samsung Series 7 Chronos NP700Z5C-S04US (may be relevant, I'm not sure), my computer began to stop allowing the execution of any service or application, as well as discontinuing the update of the clock until a hard shutdown was performed. This seems to occur randomly after periods of inactivity and I've no idea the cause. These are measures I have already taken in order to attempt to stop this: -Obviously Googling potential answers to this problem -Updating all drivers -Researching all events that have occurred around the time of the failure to respond (with no results) -I tried applying "bcdedit /set disabledynamictick no" which was a hotfix for what seemed to be the same error but was not. Here is some more, potentially related, information about the error: -No BSOD (actually, I haven't at all experienced a BSOD with Windows 8) -Computer seems to have a problem shutting down/restarting most of the time (Hangs at the point where it should completely turn off) -New sound instances are not able to play, but previously loaded containers function properly -As mentioned before, the clock freezes at the time of the error -USB devices function properly -Servers that I was running fail to respond on my end, but stay online. If you require more information, please request it specifically and I will be happy to oblige. Thanks.

  Read the article

• How do you enable webcam support in Facebook for Ubuntu 10.04?

  - by Jonathan

  I think I have finally arrived at an insolvable equation: Chromium v.7 + Ubuntu 10.04 + Sun Java 6 + Webcam + Facebook + Flash 10 = non-functional All of those items listed above are potential points of failure in this situation, and any help narrowing them down would be fantastic. I am simply trying to enable webcame support directly through Facebooks website. Forum searches and the usual googling turn up few posts related to this specific equation. Two of the major suggestions include: 1) Installing the Sun (I refuse to say oracle sob)-provided Java implementation instead of the OpenJDK normally installed in Ubuntu. And yes, after installing it, I did update all my default supports to use the sun commands over the openjdk. 2) Somehow enabling Facebook as a permitted site to access my webcam using Flash settings. I have not been able to explore option 2 because I cannot find a way to adjust the Flash settings in chromium 7. Other factors that do not help include the fact that I am pretty sure facebook changes its webcam interface every 10 seconds just to keep troubleshooters and support personnel on their toes. If anyone has a OTP that informs us of the next shift in the app, a leak would be greatly appreciated!

  Read the article

• Google MAIL not arriving - relay not allowed

  - by renevdkooi

  I have a server with sendmail, hosting my domain mind-zone.nl, i changed the MX records to point to the server. When I use Hotmail or any other client the email arrives and everything is fine. ONLY mail from GMAIL server is bounced and gmail returns "relay denied". I have set all the virtual server host settings etc, from command line I can send mails as well, hotmail works, etc. Just not gmail. The strange thing is, this is what gmail returns: Look at the lower part: "Received by" it returns some IP address which is not mine and has absolutely nothing with my domain. While when I do a NSLOOKUP and change to google's DNS server it will state that the IP Address for my domain is correctly pointing at my server. Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 5.7.1: Relay access denied (state 14). ----- Original message ----- MIME-Version: 1.0 Received: by 10.14.37.138 with SMTP id y10mr3421504eea.43.1297665573901; Sun, 13 Feb 2011 22:39:33 -0800 (PST) Received: by 10.14.29.75 with HTTP; Sun, 13 Feb 2011 22:39:33 -0800 (PST)

  Read the article

• Setting up a global MySQL Cluster in the cloud

  - by GregB

  I'm giving the question an overhaul to more specifically identify where I need help. I use two tools to manage a bunch of cloud server: Puppet and Rundeck. Both of these can be configured to use a mysql backend. I'd like to setup an instance of each application in both the U.S., and the U.K., treating the U.K. servers as hot stand-bys in case of failure in the U.S. I want to use a MySql cluster so that the data is automatically replicated from the U.S. to the U.K. Because these are hot standbys, high performance is not a goal. Redundancy and data integrity are most important. My question revolves around the setup of the mysql cluster. I want to run three servers, each one running a data node, a sql node, and a management node. Is this a valid configuration for mysql server? If so, could someone point me in the right direction for creating such a setup? I've downloaded the offical tarball, and the official debian, and the documentation for them contradicts many of the online tutorials. I'm installing on Ubuntu 10.04.

  Read the article

• query keepalived

  - by tdimmig

  *Note: I have trouble deciding what should go in serverfault and what should go in superuser, if some kindly admin decides this is in the wrong place please move it for me - many thanks. I am implementing a basic HA system with keepalived. I only want to be notified of the failover in the case of hardware failure. I do, however, have the servers switch roles periodically. I have a track_script running on the backup that will vary it's return between 0 and 1 on an interval (once a week, once a month, whatever). Upon returning 0, the priority is raised above that of the master, upon returning 1 the priority is lowered again. This way they trade places on the configured interval. The question: What can I do to tell the difference between a switch caused by my script, and a switch caused because one of the servers died? I certainly want to be notified when there is an actual problem, but not every time the servers change places because of the script. I see that version 1.2.7 has snmp support and I may be able to use it to get some information that could tell me one way or another, but to be honest I've never used snmp before and I don't know how to get the information I want with it (my Google foo failed me).

  Read the article

• Connections to IIS sometimes get stuck in CLOSE_WAIT state

  - by randomhuman

  Our application includes an ASP.Net web service that only needs to deal with a handful of clients. As such, the 10 incoming connection limit of Windows XP Pro is generally not a problem. However, on one particular server, connections are occasionally becoming stuck in the CLOSE_WAIT state. These connections build up over time and eventually new client connections are refused because the maximum number of connections are used up. From my googling it sounds like a failure of the webservice to properly close the connection can cause this problem, but as it works just fine on hundreds of other Windows XP pro machines I can't see it being a bug in our code. It also ran fine on the affected machine until some shenanigans on the part of the end user (I think they set about deleting duplicate files in order to reduce their disk usage, but they did not exactly come clean about it). What could the user have changed to introduce this problem? Is there any way I can force connections that are in CLOSE_WAIT to time out rather than letting them hang around? I have seen suggestions to reduce TcpTimedWaitDelay, but that only relates to the TIME_WAIT state, and changing it did not have any effect.

  Read the article

• How to start and stop a systemd unit with another?

  - by Andy Shinn

  I am using CoreOS to schedule systemd units with fleet. I have two units (firehose.service and firehose-announce.service. I am trying to get the firehose-announce.service to start and stop along with the firehose.service. Here is the unit file for firehose-announce.service: [Unit] Description=Firehose etcd announcer BindsTo=firehose@%i.service After=firehose@%i.service Requires=firehose@%i.service [Service] EnvironmentFile=/etc/environment TimeoutStartSec=30s ExecStartPre=/bin/sh -c 'sleep 1' ExecStart=/bin/sh -c "port=$(docker inspect -f '{{range $i, $e := .NetworkSettings.Ports }}{{$p := index $e 0}}{{$p.HostPort}}{{end}}' firehose-%i); echo -n \"Adding socket $COREOS_PRIVATE_IPV4:$port/tcp to /firehose/upstream/firehose-%i\"; while netstat -lnt | grep :$port >/dev/null; do etcdctl set /firehose/upstream/firehose-%i $COREOS_PRIVATE_IPV4:$port --ttl 300 >/dev/null; sleep 200; done" RestartSec=30s Restart=on-failure [X-Fleet] X-ConditionMachineOf=firehose@%i.service I am trying to use BindsTo with the notion that start and stop of firehose.service will also start or stop firehose-announce.service. But this never happens correctly. If firehose.service is stopped, then firehose-announce.service goes to failed state. But when I start firehose.service, the firehose-announce.service doesn't start up. What am I doing wrong here?

  Read the article

• Service redirection on same network

  - by Unode

  I have a network on which I run multiple servers each dedicated to a given service. Because most services run on distinct ports I'm currently looking for a way of unifying "all" services into a single "proxy" machine. The idea is to abstract which machine is being accessed but still allow direct connection if needed/requested. This "proxy" machine has only one network interface which is part of the same network as all the other service providing machines. I've looked into Routing and NAT but I've so far failed to figure out how to make it work. I tried to achieve this using shorewall but couldn't find clear examples. However I'm not entirely sure this is the best/simplest strategy. With that said, what would be the best way of achieving this result? Example case: Proxy IP - Listening port - Send requests to 192.168.0.50 80 192.168.0.1:80 " 22 192.168.0.2:2222 " 3306 192.168.0.3:3000 " 5432 192.168.0.4:5432 " 5222 192.168.0.5:5222 PS: I'm not concerned with the single-point-of-failure nature of the proxy. Thanks

  Read the article

• Remotely port forward/launch process or a client-less remote desktop app?

  - by DC177E

  I have an XP box running Logmein at a remote location behind a linksys router, which was running well for a whole of four days, until we had a power failure. Our ISP gave us a new IP, the machine restarted, and logmein did not autorun (or, at least, it did not automatically sign in), and our service (which may or may not be a Minecraft server with non-backed-up save files) also did not run upon startup. Logmein does not register the new IP (it still displays the old one). I have a DDNS updater service, so I do know the new dynamic address. I have tried using the built in XP remote desktop service, but, as with almost all non-cloud-based remote desktop services, it requires a port forward. Thus, I would appreciate it if anyone has any ideas as to: A: Any way of accessing our router remotely to forward the remote desktop port. I've seen the Remote Management option (forwarding the setup page to port 8080), but I do not have it enabled. I've tried UPnP, but again, the setup page for our router is not forwarded. B: Any way of remotely launching a process that does not require port forwarding (or uses ports 255XX, 18XXX, or 9000.), such as a remote console service built into XP. I realize this is a near impossibility. C: A Way to remotely start logmein, and sign in, which is likely a definite impossibility. Sorry if this is too specific for Stackexchange, or if I've put it into the wrong section (is SuperUser the correct place for this?). Ideas would, again be much appreciated, as shot-in-the-dark-like this may be.

  Read the article

• Outlook 2007 - Mailbox doesn't show my Items (like Calendar)

  - by cyntaxx

  Hi All, I have running an Exchange Server 2003 and 2 IBM Laptops (A&B)with XP SP3. On both Laptops Office 2007 is installed. Laptop "A" Outlook doesn't show me my Calendar and Notes entries in my mailbox tree on Laptop "A". I can click on the calenendar tab and the entries are there. On Laptop "B" it is working fine. I know that I can make a "rigth click" on "mailbox" and choose "create new folder". Than I select i.g. my calendar. It creates it, but I can't access it through my mailbox tree. Clicking on the Calendar tab works fine again. So, the mailbox is fine (I think). There must be failure with Outlook. I tried these commands here with no positive result. Outlook /cleanviews Outlook /resetfolders I want to avoid a repair installation of Outlook, because the whole office needs to be repaired. (And both laptops belong to my boss) :) Thanks, Toby

  Read the article

• Datastage 8.7 installs fine on Window7 without any errors but it can not launch localhost:9080 web console

  - by user265273

  When I launch the web console, I get page can not be displayed error. What I have tried so far: I have re-installed DS about 7 times, and each time, I get same errors. I added entries in etc/hosts file for local host and my host name. I have turned off firewall. My hardware/software setup. My host system is window8.1. My vmware workstation is 7. The guest os is windows 7 enterprise x64. I have installed 10g, and given dba role to public. I have installed VS 5, and ms visual c++ 2010 express. I have installed msxml. IE version is 10. Firewall is off. My internet works fine It passed all the DS requirement tests and install completed successfully. When I launch my vmware guest instance, I do get SQL5000c error upon boot which I have tried to ignore in some installs and in some, I used db2systray -clean command to get rid of it. But that has not helped solve the webconsole connect failure to my host. I have spent over 2 weeks exclusively on this issue and badly need some help.

  Read the article

• Video adapter problem on new motherboard

  - by Dmitriy Matveev

  Something bad happened to my PC several days ago. I wasn't near my PC, so I have no idea about what happened it was just halted. When I tried to boot it was entering infinite loops of a few seconds power up (cpu, hdds, etc) and then power down. I've tried to boot the system with no additional components (that includes hdd, video, network adapters and even memory) connected and that didn't solved the problem, so I've made a decision that most likely it's either some a problem with power unit or with motherboard. I've tried to replace my power unit by another one (which was expected to be working) and the problem didn't resolved again. I've bought a new MB (ASUS P5KPL-AM SE) and tried to get it running with my old CPU and memory (I hope it's still alive). Since this MB include on-board video I've tried to run the PC without installation of mine video. The PC wasn't running and the BIOS was beeping one long signal following by two short (Does it means a video problem?). After that I've installed my video adapter to PCI-E slot and tried to boot the system again and the BIOS was beeping the same. I don't get it. I may expect some problem with CPU and/or memory since I don't know what happened to my PC (maybe some power failure or something different), but not with video and not with on-board video on newly bought MB. How can I understand what's wrong with my system now?

  Read the article

• I really need help resolving a Window Vista BSOD (Blue Screen Crash) on my desktop

  - by anonymous

  Hi, thanks for taking the time to read this. I'll get straight to the details. My desktop is on the fritz; it keeps going to blue screen with the stop message of 0x0000007E immediately after the loading bar of vista, right before transitioning to the account selection screen. My desktop runs on a dual-core 32-bit processor with windows Vista Home(?) installed. I have 3 GB of ram as two separate modules, a 1GB acer module and a 2GB geil module. I have an ati video card, unfortunately I cannot recall the exact name but the chipset is ATI and the manufacturer is Sapphire and the card is on the lower end. My hard drive is 320GB (i think) partitioned into two. The C:\ partition is red lined, while the D:\ partition is still pretty empty. As per the advice of my friend, i tried restarting the system with the graphics card removed. Upon failure, i repeated the process removing one RAM module one at a time, but the system still failed to load. Vista would attempt to repair the system and it would initially report that the system was fixed, but vista really failed to fix the problem. After removing the memory modules, vista started to report it's inability to fix the problem. I tried running on safe mode and the driver listing would always stop at crcdisk.sys. I ran memory diagnostics using the windows memory diagnostic tool found in the screen after vista's failed attempt to fix the problem with no luck. the problem details are as such: Problem Event Name : StartupRepairV2 Problem Signature 01: AutoFailover 02: (vista's version number?) 03: 6 04: 720907 05: 0x7e 06: 0x7e 07: 0 08: 2 09: WrpRepair 10: 0 OS Version: 6.0.6000.2.0.0.256.1 Locale ID 1033 any correct advice would be appreciated as i really need my pc to work so i can work on my projects. kinda sad, but i'm college of computer science and i have no idea what to do :P

  Read the article

• Cheated!! Please help

  - by Rohit K

  I was experiencing some hard disk problem with my HP laptop. It showed at bootup as system diagnostics are run -- Smart Drive attribute failed. Also i repeatedly got a warning for imminent hard drive failure and thus to back up my data. So i gave my laptop to authorized HP service center for repair. They formatted my hard disk and installed a pirated copy of Win 7 Ultimate (i earlier had genuine Win 7 Home Premium running on my laptop) and they told me they cover out-of-warranty issues and even charged me for it. What's worse is that the hard drive problem is still present and all i am left with is an illegal copy of windows which i think also voids my warranty. What should i do? I mean i did purchase a genuine Windows with my laptop, so there must be some way to reinstall it even when i don't have a genuine copy now on my machine. Can't i get legit keys to reinstall Win 7 from Microsoft because i did pay for the software when i purchased my machine. And if that's not possible, how can i claim warranty and get my hard disk replaced by HP?

  Read the article

• Managing records of bugs and notes

  - by Jim

  Hi. I want to create a knowledgebase for a piece of software. I'd also like to be able to track bugs and common points of failure in that application. Linking knowledgebase articles to bug records would be a real boon, as would the ability to do complex queries for particular articles and bugs on the basis of tags or metadata. I've never done anything like this before, and like to install as little as possible. I've been looking at creating a wiki with Wiki On A Stick, and it seems to offer a lot. But I can't make complex queries. I can create pages that list all 'articles' with a particular single tag, but I can't specify multiple tags or filters. Is there any software that can help? I don't want to spend money until I've tried something out thoroughly, and I'd ideally like something that demands little-to-no installation. Are there any tools that can help me? If something could easily export its data, or stored data in XML, that would be a real plus too. Otherwise, are there any simple apps that allow me to set up forms for bugs, store data as XML then query and process that XML on demand? Thanks in advance.

  Read the article

• Trying to migrate old server to new. Getting duplicate name errors

  - by SpaceCowboy74

  I have an existing server on my network that is running under windows 2000 with SQL Server 2000 on it. We are in the process of moving the server to a windows 2008 platform, with SQL 2008 as well. A few changes are happening though. For one, applications that were on the old server, will now be on a new application server. The issue is, the developers of the original applications hard coded the server name in the apps and/or batch files. I could change all the code, but that would require weeks of work. My original idea was to change the hosts and lmhosts files to point to the new servers with a different IP. So i implemented the following where oldserver was the original server and server is the new one brought online: hosts: 192.168.1.10 oldserver 192.168.1.15 server lmhosts: 192.168.1.10 oldserver #pre 192.168.1.15 server #pre Problem is, when i try to do this, i get the following errors: \\server\c$ Logon Failure : The target account name is incorrect. and \\oldserver\c$ A duplicate name exists on the network. I know about renaming servers in AD, but can't do so yet as the original server is in production and i cannot rename it without breaking a lot of things at the moment. I'm wanting to do a proof of concept to the management before renaming the servers. Any idea how i should resolve this?

  Read the article

• How can I tell System Restore in WIndows 7 recovery console to use my recovered backup drive's restore point data?

  - by Rich Shealer

  My Windows 7 desktop PC failed to boot. It would get to a grayish screen with a mouse and would only respond to the power button. After much examination I found that the problem was not a failed drive as running CHKDSK from the Recovery Console on my main drives passed without any errors. I had been installing various Java version in the days before the failure so I decided to use a restore point to roll backwards. I have an external SATA drive controller with two 2 TB drives mirrored using the Windows mirroring function. My system has been backing up to this drive regularly. The problem is I accidently broke the mirror when testing to see if this drive system might have been causing my boot issue. Connecting it to another machine showed two dynamic drives that were invalid. In the end I reformatted one as an NTFS basic disc and used recovery software on the other to copy all of the files to the reformatted drive. I had to copy the restore points into the new drive's System Volume Information folder by granting rights to that user. I moved the drive back to the original machine and rebooted. I can see my new drive, it even uses the same drive letter as it did in normal mode. Running System Restore it lists a new Automatic Restore point created while sitting at the RC along with all of my backups. Selecting the backup I want (or any other) I get a dialog. The backup drive could not be found. System Restore is looking for restore points on your backup. Make sure the backup drive is on and connected to this computer and then click OK. What do I need to do to allow system restore to see the restore points?

  Read the article

• windows server 2003 speed issues

  - by farzinSH

  I have a HP server with windows server 2003 and 50 windows XP clients. Since a week and a half the networks speed suddenly drop 2-3 times per day. It gets so slow that none of the clients could work with the HIS program installed on them. We tried so many different things such as replacing the hubs,switches and even some wires. Every time one of these changes solves the problem and the network goes back to its normal state. I checked everything. Even when I disconnected all the clients from the server and connected it to just one computer the problem still remained for 2 hours. I just narrowed down the problem to the couple of likely speculations as follows: viruses? (Updated Kaspersky running on the server shows none) server hardware failure? Physical memory usage on the server? (Because the last time the problem occurred none of the changes above solved the issue so I restarted the server an checked the physical memory usage which was 2 GBs. But I noticed it's increasing over time to over 9 GBs...the server has 16 GBs of RAM.) I surfed the internet and got nothing. Any help would do us a lot....thanks in advance

  Read the article

• Profile not loaded correctly (Cannot access registry)

  - by xaav

  Every so often, I log on and get the Following Message: User profile was not loaded correctly. You have been logged on with a temporary profile. Changes you make to this profile will be lost when you log off. Please see the event log for details or contact your administrator This almost always happens when somebody else has been on the computer for a while, and then I log on. This never used to happen, but now it happens pretty often. My profile is not permanently corrupted, all I have to do is restart my computer, but this annoys me, and I would like to fix it. I was curios about the reason of this cause, so I looked into the Event Log, and found the root of the problem was the ntuser.dat file in the profile that I was logging on to was locked at logon time. This resulted in the current users registry not being loaded, resulting in failure to load the profile. I just found a microsoft article that mentions this exact issue: http://support.microsoft.com/kb/960464/ The problem is that I do not want to delete this profile; and this issue does not come up every time that I log on, only when somebody else has been on a long time before me. What could be locking this file? Is there any way to get a process list without logging on so that I can identify which process has the file locked? Any other suggestions?

  Read the article

• ZFS Data Loss Scenarios

  - by Obtuse

  I'm looking toward building a largish ZFS Pool (150TB+), and I'd like to hear people experiences about data loss scenarios due to failed hardware, in particular, distinguishing between instances where just some data is lost vs. the whole filesystem (of if there even is such a distinction in ZFS). For example: let's say a vdev is lost due to a failure like an external drive enclosure losing power, or a controller card failing. From what I've read the pool should go into a faulted mode, but if the vdev is returned the pool should recover? or not? or if the vdev is partially damaged, does one lose the whole pool, some files, etc.? What happens if a ZIL device fails? Or just one of several ZILs? Truly any and all anecdotes or hypothetical scenarios backed by deep technical knowledge are appreciated! Thanks! Update: We're doing this on the cheap since we are a small business (9 people or so) but we generate a fair amount of imaging data. The data is mostly smallish files, by my count about 500k files per TB. The data is important but not uber-critical. We are planning to use the ZFS pool to mirror 48TB "live" data array (in use for 3 years or so), and use the the rest of the storage for 'archived' data. The pool will be shared using NFS. The rack is supposedly on a building backup generator line, and we have two APC UPSes capable of powering the rack at full load for 5 mins or so.

  Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >