Search Results

Search found 41582 results on 1664 pages for 'fault tolerance'.

Page 113/1664 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

• Too much memory consumed during TFS automated build

  - by Bernard Chen

  We're running TFS 2010 Standard Edition, and we've set up an automated build to run whenever someone checks in code. We run through all of the automated tests (built with MSTest) as part of the build. We've configured the build to run the tests as a 64-bit process, but the QTAgent.exe that runs the tests grows in memory while the tests are running. It is currently reaching 8GB for the ~650 tests we have, and the process has slowed significantly when we went from 450 tests to 650 tests. When we run all of the tests in the local development environment, memory seems to be freed at least with each TestClass and never exceeds a certain level. The process of running all tests has not increased significantly in the local development environment. Is there a way to configure the build service to free up memory with each Test or each TestClass? With the way things are currently running, the build process gets very slow when we start to run out of memory on the machine. Edit: I found the MSTest invocation in the build log and ran it manually and saw the same behavior of runaway memory. I removed the /publish, /publishbuild, /teamproject, /platform, and /flavor parameters from the invocation of MSTest, in case the test runner was holding onto results until the end, but the behavior didn't change. I ran the same command line on a dev box, separate from the build server, and the memory freed up frequently. It seems there must be something wrong/different about the build server that is causing it to behave different, but I'm stumped where to look. I've looked at qtagent.exe.config, mstest.exe.config, versions of both executables. What else might affect this?

  Read the article

• AD LDS (ADAM) user not authenticate

  - by Hongwei

  I am trying to add a user to AD LDS (formerly known as ADAM). I added the user, set the password, and set the following properties: accountsExpires=(Never) msDS-UserAccountDisabled=FALSE msDS-UserDontExpirePassword=TRUE userPrincipalName=JUser I also added the user to Readers group. However, when I used ADSI Edit to bind to the directory with this user's credential, I got an error indicating invalid username or password. What else do I have to do for the user to authenticate? Thanks.

  Read the article

• Binary management/delivery

  - by Stan

  Is there any good solution to management server application binaries (may up to 1GB), with the aim of achieving version control and delivery, and have a way to verify that every remote server has same version? Our operating system is Windows Server 2003.

  Read the article

• uwsgi_params not in nginx

  - by Halit Alptekin

  Firstly I setup nginx and uwsgi via apt-get. And,I add the line to nginx conf file(/etc/nginx/conf.d/default.conf) like below line; server { listen 80; server_name <replace with your hostname>; #Replace paths for real deployments... access_log /tmp/access.log; error_log /tmp/error.log; location / { include uwsgi_params; uwsgi_pass 127.0.0.1:8889; } } I had a error; Starting nginx: [emerg]: open() "/etc/nginx/uwsgi_params" failed (2: No such file or directory) in /etc/nginx/conf.d/default.conf:11 configuration file /etc/nginx/nginx.conf test failed If I add uwsgi_params file from uwsgi's source;I had a simple error. Thanks

  Read the article

• Connecting debian and windows via IPsec VPN with Racoon and ipsec-tools

  - by Michi Qne

  I've some trouble with the IPsec configuration on my debian server (6 squeeze). This server should connect via IPsec VPN to an windows server, which is protected by an firewall. I've used racoon and ipsec-tools and this tutorial http://wiki.debian.org/IPsec. However, I am not quite sure, if this tutorial fits to my purpose, because of some differences: my Host and my gateway are the same server. So I don't have two different ip addresses. I guess, that's not a problem the other server is an windows system behind a firewall. Hopefully, not a problem the subnet of the windows system is /32 not /24. So I change it to /32. I worked through the tutorial step by step, but I wasn't able to route the ip. The following command didn't work for me: ip route add to 172.16.128.100/32 via XXX.XXX.XXX.XXX src XXX.XXX.XXX.XXX So I tried the following instead: ip route add to 172.16.128.100 .., which obviously not solved the problem. The next problem is the compression. The windows doesn't use a compression, but 'compression_algorithm none;' doesn't work with my racoon. So the current value is 'compression_algorithm deflate;' So my current result looks like this: When I am trying to ping the windows host (ping 172.16.128.100), I receive the following error message from ping: ping: sendmsg: Operation not permitted And racoon logs: racoon: ERROR: failed to get sainfo. After googling for a while I came to no conclusion, what's the solution. Does this error message mean that the first phase of IPsec works? I am thankful for any advice. I guess my configs might be helpful. My racoon.conf looks like this: path pre_shared_key "/etc/racoon/psk.txt"; remote YYY.YYY.YYY.YYY { exchange_mode main; proposal { lifetime time 8 hour; encryption_algorithm 3des; hash_algorithm sha1; authentication_method pre_shared_key; dh_group 2; } } sainfo address XXX.XXX.XXX.XXX/32 any address 172.16.128.100/32 any { pfs_group 2; lifetime time 8 hour; encryption_algorithm aes 256; authentication_algorithm hmac_sha1; compression_algorithm deflate; } And my ipsec-tools.conf looks like this: flush; spdflush; spdadd XXX.XXX.XXX.XXX/32 172.16.128.100/32 any -P out ipsec esp/tunnel/XXX.XXX.XXX.XXX-YYY.YYY.YYY.YYY/require; spdadd 172.16.128.100/32 XXX.XXX.XXX.XXX/32 any -P in ipsec esp/tunnel/YYY.YYY.YYY.YYY-XXX.XXX.XXX.XXX/require; If anyone has an advice, that would be awesome. Thanks in Advance. Greets, Michael It was a simple copy-and-paste error in an ip address.

  Read the article

• Problems configuring an SSH tunnel to a Nexentastor appliance for use with headless Crashplan

  - by Rob Smallshire

  Problem I am attempting to configure an SSH tunnel to a NexentaStor appliance from either a Windows or Linux computer so that I can connect a Crashplan Desktop GUI to a headless Crashplan server running on the Nexenta box, according to these instructions on the Crashplan support site: Connect to a Headless CrashPlan Desktop. So far, I've failed to get a working SSH tunnel from from either either a Windows client (using Putty) or a Linux client (using command line SSH). I'm fairly sure the problem is at the receiving end with NexentaStor. A blog article - CrashPlan for Backup on Nexenta - indicates that it could be made to work only after "after enabling TCP forwarding in Nexenta in /etc/ssh/sshd_config" - although I'm not sure how to go about that or specifically what I need to do. Things I have tried Ensuring the Crashplan server on the Nexenta box is listening on port 4243 $ netstat -na | grep LISTEN | grep 42 127.0.0.1.4243 *.* 0 0 131072 0 LISTEN *.4242 *.* 0 0 65928 0 LISTEN Establishing a tunnel from a Linux host: $ ssh -L 4200:localhost:4243 admin:10.0.0.56 and then, from another terminal on the Linux host, using telnet to verify the tunnel: $ telnet localhost 4200 Trying ::1... Connected to localhost. Escape character is #^]'. with nothing more, although the Crashplan server should respond with something. From Windows, using PuTTY have followed the instructions on the Crashplan support site to establish an equivalent tunnel, but then telnet on Windows gives me no response at all and the Crashplan GUI can't connect either. The PuTTY log for the tunnelled connection shows reasonable output: ... 2011-11-18 21:09:57 Opened channel for session 2011-11-18 21:09:57 Local port 4200 forwarding to localhost:4243 2011-11-18 21:09:57 Allocated pty (ospeed 38400bps, ispeed 38400bps) 2011-11-18 21:09:57 Started a shell/command 2011-11-18 21:10:09 Opening forwarded connection to localhost:4243 but the telnet localhost 4200 command from Windows does nothing at all - it just waits with a blank terminal. On the NexentaStor server I've examined the /etc/ssh/sshd_config file and everything seems 'normal' - and I've commented out the ListenAddress entries to ensure that I'm listening on all interfaces. How can I establish a tunnel, and how can I verify that it is working?

  Read the article

• Failed MDADM Array With Ext.4 Partition - "e2fsck: unable to set superblock flags on /dev/md0"

  - by Matthew Hodgkins

  Had a power failure and now my mdadm array is having problems. sudo mdadm -D /dev/md0 [hodge@hodge-fs ~]$ sudo mdadm -D /dev/md0 /dev/md0: Version : 0.90 Creation Time : Sun Apr 25 01:39:25 2010 Raid Level : raid5 Array Size : 8790815232 (8383.57 GiB 9001.79 GB) Used Dev Size : 1465135872 (1397.26 GiB 1500.30 GB) Raid Devices : 7 Total Devices : 7 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Sat Aug 7 19:10:28 2010 State : clean, degraded, recovering Active Devices : 6 Working Devices : 7 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 128K Rebuild Status : 10% complete UUID : 44a8f730:b9bea6ea:3a28392c:12b22235 (local to host hodge-fs) Events : 0.1307608 Number Major Minor RaidDevice State 0 8 81 0 active sync /dev/sdf1 1 8 97 1 active sync /dev/sdg1 2 8 113 2 active sync /dev/sdh1 3 8 65 3 active sync /dev/sde1 4 8 49 4 active sync /dev/sdd1 7 8 33 5 spare rebuilding /dev/sdc1 6 8 16 6 active sync /dev/sdb sudo mount -a [hodge@hodge-fs ~]$ sudo mount -a mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so sudo fsck.ext4 /dev/md0 [hodge@hodge-fs ~]$ sudo fsck.ext4 /dev/md0 e2fsck 1.41.12 (17-May-2010) fsck.ext4: Group descriptors look bad... trying backup blocks... /dev/md0: recovering journal fsck.ext4: unable to set superblock flags on /dev/md0 sudo dumpe2fs /dev/md0 | grep -i superblock [hodge@hodge-fs ~]$ sudo dumpe2fs /dev/md0 | grep -i superblock dumpe2fs 1.41.12 (17-May-2010) Primary superblock at 0, Group descriptors at 1-524 Backup superblock at 32768, Group descriptors at 32769-33292 Backup superblock at 98304, Group descriptors at 98305-98828 Backup superblock at 163840, Group descriptors at 163841-164364 Backup superblock at 229376, Group descriptors at 229377-229900 Backup superblock at 294912, Group descriptors at 294913-295436 Backup superblock at 819200, Group descriptors at 819201-819724 Backup superblock at 884736, Group descriptors at 884737-885260 Backup superblock at 1605632, Group descriptors at 1605633-1606156 Backup superblock at 2654208, Group descriptors at 2654209-2654732 Backup superblock at 4096000, Group descriptors at 4096001-4096524 Backup superblock at 7962624, Group descriptors at 7962625-7963148 Backup superblock at 11239424, Group descriptors at 11239425-11239948 Backup superblock at 20480000, Group descriptors at 20480001-20480524 Backup superblock at 23887872, Group descriptors at 23887873-23888396 Backup superblock at 71663616, Group descriptors at 71663617-71664140 Backup superblock at 78675968, Group descriptors at 78675969-78676492 Backup superblock at 102400000, Group descriptors at 102400001-102400524 Backup superblock at 214990848, Group descriptors at 214990849-214991372 Backup superblock at 512000000, Group descriptors at 512000001-512000524 Backup superblock at 550731776, Group descriptors at 550731777-550732300 Backup superblock at 644972544, Group descriptors at 644972545-644973068 Backup superblock at 1934917632, Group descriptors at 1934917633-1934918156 sudo e2fsck -b 32768 /dev/md0 [hodge@hodge-fs ~]$ sudo e2fsck -b 32768 /dev/md0 e2fsck 1.41.12 (17-May-2010) /dev/md0: recovering journal e2fsck: unable to set superblock flags on /dev/md0 sudo dmesg | tail [hodge@hodge-fs ~]$ sudo dmesg | tail EXT4-fs (md0): ext4_check_descriptors: Checksum for group 0 failed (59837!=29115) EXT4-fs (md0): group descriptors corrupted! EXT4-fs (md0): ext4_check_descriptors: Checksum for group 0 failed (59837!=29115) EXT4-fs (md0): group descriptors corrupted! Please Help!!!

  Read the article

• Tomcat SPNEGO authentication against Active Directory not working.

  - by Michael

  I'm trying to authenticate against AD using the http://spnego.sourceforge.net component with tomcat. I've created my SPN's "setspn.exe -A HTTP/servername SVCTomcat" & "setspn.exe -A HTTP/servername.fqdn.net SVCTomcat" I've created my krb5.conf & login.conf file and setup the filter in the web.xml ie. <filter-name>SpnegoHttpFilter</filter-name> <filter-class>net.sourceforge.spnego.SpnegoHttpFilter</filter-class> <param-name>spnego.allow.unsecure.basic</param-name> <param-value>false</param-value> <param-name>spnego.login.client.module</param-name> <param-value>spnego-client</param-value> <param-name>spnego.krb5.conf</param-name> <param-value>krb5.conf</param-value> <param-name>spnego.login.conf</param-name> <param-value>login.conf</param-value> <param-name>spnego.preauth.username</param-name> <param-value>SVCTomcat</param-value> <param-name>spnego.preauth.password</param-name> <param-value>Pasword</param-value> <param-name>spnego.login.server.module</param-name> <param-value>spnego-server</param-value> <param-name>spnego.prompt.ntlm</param-name> <param-value>false</param-value> <param-name>spnego.logger.level</param-name> <param-value>2</param-value> Note i've stripped extraneous tags from this, so it's not the actual XML. When i go to a page protected by this filter i get this in the catalina logfile. 25-Mar-2010 12:41:26 org.apache.catalina.startup.Catalina start INFO: Server startup in 4615 ms 25-Mar-2010 12:41:47 net.sourceforge.spnego.SpnegoHttpFilter doFilter FINE: principal=SYSTEM@TESTDOMAIN And in the hello_spnego.jsp example on the website it just reports the name of the user tomcat is running as (SYSTEM), not the user i'm connecting with. It seems the author stopped halfway through his debugging page, so i've no areas to look in other than to triple check my config. Any ideas?

  Read the article

• Installing OpenSSL that supports SNI along with previous version of OpenSSL

  - by gh0sT

  So I learned that to host multiple HTTPS websites on the same IP address you need an OpenSSL version that supports SNI (0.9.8f and higher). My RHEL5 box currently has 0.9.8e and Apache version httpd-2.2.26-2.el5. According to a same question here it's not a good idea to replace the original version of OpenSSL and instead to have a parallel installation. It however doesn't explicitly mention how to achieve this. So my questions are: How do I have an alternate installation of OpenSSL without breaking the system? How do I make Apache to use this version of OpenSSL and not the original one? A detailed guide would be extremely helpful.

  Read the article

• 8Gb Fiber Channcel HBA vs. 10 Gb SPF+ Converged HBA

  - by Hossein Aarabi

  I am putting a Dell server together, more specifically R720. I have to select the correct Host Bus Adapter. This HBA on R710 will connect to a storage device. I am confused between these two: QLogic 2562, Dual Port 8Gb Optical Fiber Channel HBA (price $2,045) QLogic 8262, Dual Port 10Gb SFP+, Converged Network Adapter (price $1,618) I thought since the QLogic 2562 is a fiber channel and is more expensive then it is faster in terms of IOPS. But, it is a 8Gb as opposed to 10 Gb of SFP+. My questions: Which one is better (IOPS performance, etc.)? Why should I choose one over another?

  Read the article

• Cisco Pix 501 - reaching local host limit, showing odd IP addresses

  - by cdonner

  I am running out of licenses on my Pix 501, and the show local-host command lists a number of odd IP addresses that do not belong to my 10.10.1.* subnet. Any idea what they are? The only thing I could find was a potential ISP: DINSA is Defence Interoperable Network Services Authority, an agency of the Ministry of Defence of the United Kingdom. Does not sound right. I don't see any active connections, though. I can't ping or traceroute these IPs, but they reappear after I clear the list, with various other addresses in that general range, up until the connection limit is reached. Based on the number denied, I suppose I would have a lot more of them had I not the connection limit. Very dubious. Is anybody else seeing this? pixfirewall# show local-host Interface inside: 10 active, 10 maximum active, **118 denied** local host: <10.10.1.110>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.176>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.170>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 1/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.175>, TCP connection count/limit = 11/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 1/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.108>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <25.33.41.115>, // ???????????????? what is this? TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <25.33.226.124>, // ???????????????? what is this? TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.172>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <25.36.114.91>, // ???????????????? what is this? TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.109>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): pixfirewall#

  Read the article

• Do you have to work with Ruby to make nginx_http_push_module work

  - by Saif Bechan

  I am interested to work with the nginx_http_push_module. It says something about using comet, and I see some code example of ruby. I want to know if this is just used as an example or is this the only way to have it to work. I want to use this module in combination with Node.js, server side JavaScript. With this I want to create a data-stream from the server to the client.

  Read the article

• Can a CNAME be a hostname

  - by pulegium

  This is bit of a theological question, but nonetheless... So, a server has a hostname, let's say the fqdn is hostname.example.com (to be really precise about what I mean, this is the name that is set in /etc/sysconfig/network). The very same server has multiple interfaces on different subnets. Let's say the IPs are 10.0.0.1 and 10.0.1.1. Now the question is, is it theoretically (mind you, this is important, I know that practically it works, but I'm interested in purely academic answer) allowed to have the following setup: interface1.example.com. IN A 10.0.0.1 interface2.example.com. IN A 10.0.1.1 hostname.example.com. IN CNAME interface1.example.com. OR should it rather be: hostname.example.com. IN A 10.0.0.1 interface2.example.com. IN A 10.0.1.1 interface1.example.com. IN CNAME hostname.example.com. I guess it's obvious which one is making more sense from the management/administration POV, but is it technically correct? The argument against the first setup is that a reverse lookup to 10.0.0.1 returns interface1.example.com and not what one might expect (ie the hostname: hostname.example.com), so the forward request and then sub sequential reverse lookups would return different results. Now, as I said, I want a theoretical answer. Links to RFC sections etc, that explicitly allows or disallows use of CNAME name as a hostname. If there's none, that's fine too, I just need to confirm. I failed to find any explicit statements so far, bar this book, where this situation is given as an example and implies that it can be done as one of the ways to avoid MX records pointing to a CNAME.

  Read the article

• Getting 0x80070043 error when accessing Samba share from Windows 7

  - by FelixM

  I created a Samba share on my new Ubuntu 10.04 machine. When I try to access it from a Windows 7 client, I get network error 0x80070043 (The network path not found). However, I get this error when I click on the share in the Windows Explorer, so it seems that Windows does find the path. I already enabled NTLMv1, disabled 128bit security and made sure that NetBIOS is running. I briefly disabled the Windows firewall, it didn't make a difference. What could be the problem?

  Read the article

• How can I trigger the creation of a new CLB file?

  - by Xperimental

  I'm currently having a problem with an application using COM running on Windows Vista. The application runs ok on one machine, but doesn't work on a similar configured machine. Both machines are virtual images originating from the same source image. While searching the registry for causes of this error, I came across the CLBVersion key in HKCR\CLSID which seems to have something to do with COM. The value of the key differs between the two machines (0x6 on the erroneous one, 0xc on the working one). Also there are files containing the same number in their filenames in the %SystemRoot\Registration directories of the machines. They are called R000000000006.clb and R00000000000c.clb respectively. I have already searched the windows event log for anything leading to the creation of those files (I have searched by the creation date of the files). Now a few questions regarding the registry keys and the files: Is it correct, that this is connected to COM? What is the function of the files? What causes the creation of a new "CLBVersion"? Is there a way for me to trigger the creation of a new CLB file? edit: I have now found out, that this has nothing to do with my application error. But I would still be interested in details about the registry key and the files. An installation of Visual Studio 2005 has brought the second machine to the same configuration (0xc in registry and file) as the other one.

  Read the article

• Which Linux distro for Mac Mini?

  - by spoon16

  I recently received a Mac Mini and would like to set it up as a web server and git source server. I would like to learn Linux so am interested in setting up my Mac Mini with Linux instead of OSX. Here are the main things that I will be using the Mac Mini for. git Repositories (via Gitosis) build server (build projects in git repositories using commit hooks and run tests) simple websites (PHP) learning C++ in a non-Windows environment What distribution would you recommend? Please provide some detail in your answer so that I can make an meaningful decision. Because I am looking to use the mini as more of a server than a normal desktop machine I was thinking of Ubuntu Server, I'm not sure if that is over kill though given the hardware I am using.

  Read the article

• Unable to remove file using 'rm'

  - by Alvin Sim

  Hi all, In one of our severs (IBM AIX), we have a file in path /data/1002/ which we were not able to remove or delete using the 'rm' command. The error message we got is "rm: A1208001.002: A file or directory in the path name does not exist." With the "-f" option, no error message was displayed, but the file is still there. This file has a '0' byte size and when i use the command "touch A120001.002", i see two files with the same file name in that directory. The directory listing is as below: $ ls -l total 56 -rwxrwxrwx 1 oracle dba 0 Feb 09 11:57 S1208001.002 drwxrwxrwx 4 nobody dba 24576 Feb 09 13:36 backup How do I remove this bogus fie? Thanks.

  Read the article

• Error "403 Forbidden" on Sharepoint Search Settings Page

  - by user21924

  Hello I thought I had solved this nightmare by re-entering the values in my SSP properties set up, however accessing the Search Settings page error has reared it ugly head again. Now all solutions point to this method listed here * http://www.routtlogics.com/blog/Lists/Posts/Post.aspx?ID=6 * http://social.technet.microsoft.com/Forums/en-US/sharepointadmin/thread/f00651cd-e452-45b9-b19e-90e89c3c3ad4 * http://blogs.technet.com/sushrao/archive/2009/03/26/microsoft-office-sharepoint-server-2007-moss-403-forbidden-error-when-clicked-on-search-settings-page.aspx The above workaround(s) basically states that granting the local group WSS_WPG read and write permission to the Task folder in the Windows directory would solve the problem, however whenever I try to change to the permission attribute of this folder I get an access denied message, even when logged in as a Domain administrator, Enterprise and even the SharePoint Farm administrator. Please guys how do I get around this access denied issue. Thanks

  Read the article

• squid ssl bump sslv3 enforce to allow old sites

  - by Shrey

  Important: I have this question on stackoverflow but somebody told me this is more relevant place for this question. Thanks I have configured squid(3.4.2) as ssl bumped proxy. I am setting proxy in firefox(29) to use squid for https/http. Now it works for most sites, but some sites which support old SSL proto(sslv3) break, and I see squid not employing any workarounds for those like browsers do. Sites which should work: https://usc-excel.officeapps.live.com/ , https://www.mahaconnect.in As a workaround I have set sslproxy_version=3 , which enforces SSLv3 and above sites work. My question: is there a better way to do this which does not involve enforcing SSLv3 for servers supporting TLS1 or better. Now I know openssl doesn't automatically handle that. But I imagined squid would. My squid conf snipper: http_port 3128 ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=4MB cert=/usr/local/squid/certs/SquidCA.pem always_direct allow all ssl_bump server-first all sslcrtd_program /usr/local/squid/libexec/ssl_crtd -s /usr/local/squid/var/lib/ssl_db -M 4MB client_persistent_connections on server_persistent_connections on sslproxy_version 3 sslproxy_options ALL cache_dir aufs /usr/local/squid/var/cache/squid 100 16 256 coredump_dir /usr/local/squid/var/cache/squid strip_query_terms off httpd_suppress_version_string on via off forwarded_for transparent vary_ignore_expire on refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 UPDATE: I have tried compiling squid 3.4.5 with openssl 1.0.1h . No improvements

  Read the article

• eth0:0 is configured but not listed in ifconfig output

  - by FractalizeR

  Hello. I have the following problem: My server was given two IPs from [b]different[/b] subnets. Now I am trying to configure the system to work properly. I have created [root@server ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) HWADDR=00:30:48:DA:B1:0E DEVICE=eth0 BOOTPROTO=none BROADCAST=79.174.69.255 IPADDR=79.174.69.241 NETMASK=255.255.254.0 NETWORK=79.174.68.0 ONBOOT=yes GATEWAY=79.174.68.1 TYPE=Ethernet [root@server ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0:0 # Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) HWADDR=00:30:48:DA:B1:0E DEVICE=eth0 BOOTPROTO=none BROADCAST=79.174.69.255 IPADDR=79.174.71.74 NETMASK=255.255.255.0 NETWORK=79.174.71.1 ONBOOT=yes GATEWAY=79.174.71.1 TYPE=Ethernet But both after "service network restart" and after "reboot" [root@server ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:30:48:DA:B1:0E inet addr:79.174.71.74 Bcast:79.174.71.255 Mask:255.255.255.0 inet6 addr: fe80::230:48ff:feda:b10e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:910284 errors:0 dropped:0 overruns:0 frame:0 TX packets:2924 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:257964879 (246.0 MiB) TX bytes:232450 (227.0 KiB) Memory:df220000-df240000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:27 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6976 (6.8 KiB) TX bytes:6976 (6.8 KiB) Device eth0:0 is not shown as active. If I try [root@server ~]# ifconfig eth0:0 eth0:0 Link encap:Ethernet HWaddr 00:30:48:DA:B1:0E UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:df220000-df240000 It is shown as up and running, but IP is not assigned to it. Also it is strange, that IP address assigned to eth0:0 in config file is used by eth0. /var/log/messages shows nothing about network configuration errors on either eth0 or eth0:0. system-config-network seem to understand all settings correctly and resaves them ok also. "ifup eth0:0" executes ok, but ifconfig afterwards shows no eth0:0 device after that. What did I do wrong? May be the problem is that IPs are from different subnets?

  Read the article

• Access All VLANS over XenServer Interface

  - by Garrett

  For my current setup, I have a physical NIC on a XenServer machine that receives traffic tagged with various VLAN IDs. I have a virtual machine that is running Vyatta that needs to be able to access both tagged and untagged traffic in order to route traffic. Here's the problem: 1) If I bind the NIC in XenCenter to the VM (which has no VLAN ID associated with it), the VM cannot see any tagged traffic. I have verified this using tcpdump. However, the tagged traffic is flowing into the XenServer machine perfectly fine. 2) I have more than 7 VLANs, so adding each VLAN as an interface within XenCenter isn't an option. 3) Even though tcpdump shows no tagged traffic coming in the VMs NIC, I have tried adding VLAN interfaces within Vyatta. This also doesn't work. I have tried using both Linux bridge and openvswitch setups and neither seem to work. I am running XenServer 6.0.3 free and Vyatta VC6.3. Please help! I've run out of ideas. I've googled for hours and can't seem to find anything.

  Read the article

• Heartbeat (Linux HA) and NetApp?

  - by Drew

  Does anyone have any experience setting up a high availability two node Linux cluster using heartbeat (linux-ha.org) and NetApp storage (preferably using SnapDrive for Linux)? Basically I would like to mount the same NetApp LUN over Fibre Channel to two servers in an Active/Passive mode (only one server can access the LUN at a time) Thanks!

  Read the article

• QoS basics on a Cisco ASA

  - by qbn

  Could someone briefly explain how to use QoS on Cisco ASA 5505? I have the basics of policing down, but what about shaping and priorities? Basically what I'm trying to do is carve out some bandwidth for my VPN subnets (in an object-group called priority-traffic). I've seen this Cisco QoS document, however configuring shaping and priority-queue don't seem to have any effects in my test. A full download of the linux kernel from kernel.org will boost a ping to a server via VPN sky high. Policing has been successful in passing this test, although it doesn't seem as efficient (I cap non-vpn traffic at 3 of my 4.5 megabits of bandwidth). Am I misunderstanding the results of the test? I think there is some simple concept I'm not grasping here. EDIT: Here is my config thus far (I have 4.5 megabits of bandwidth): access-list priority-traffic extended permit ip object-group priority-traffic any access-list priority-traffic extended permit ip any object-group priority-traffic access-list priority-traffic extended permit icmp object-group priority-traffic any access-list priority-traffic extended permit icmp any object-group priority-traffic access-list non-priority-traffic extended deny ip object-group priority-traffic any access-list non-priority-traffic extended deny ip any object-group priority-traffic access-list non-priority-traffic extended permit ip any any priority-queue outside queue-limit 440 class-map non-priority-traffic match access-list non-priority-traffic class-map priority-traffic match access-list priority-traffic class-map inspection_default match default-inspection-traffic policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp policy-map outbound-qos-policy class non-priority-traffic police input 2500000 police output 2500000 class priority-traffic priority service-policy global_policy global service-policy outbound-qos-policy interface outside

  Read the article

• Reset crawled content for one content source in MOSS

  - by Andrew Strong

  I'm using MOSS 2007 and I want to wipe out the search index and do a full re-crawl of one of my content sources. I see the link to 'Reset all crawled content' but I don't want to have to re-crawl the other content sources. Is there any way to do this?

  Read the article

• Unable to Create System DSN

  - by Baxter

  Environment: Windows 7 Professional 64-bit Operating System Problem: (ODBC Data Source Administrator) Opening Administrative Tools - Data Sources (ODBC) - Click "System DSN" tab. Error: ODBC System DSN Warning You are logged on with non-Administrative privileges. System DSNs could not be created or modified. Failed Troubleshooting so far: Enabled local Administrator account logged in under this account. Navigated to C:\Windows\System32\ right clicked odbcad32.exe Run as Administrator Notes: I am an Administrator on this machine. The 32-bit version runs fine if I open C:\Windows\SysWoW64\odbcad32.exe However, I need the data source to be 64-bit. I am not experiencing this problem on any of my other 64-bit machines. Any help would be greatly appreciated.

  Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >