Search Results

Search found 70026 results on 2802 pages for 'file recovery'.

Page 113/2802 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

• HDD dead forever???

  - by Roberto

  Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken, it couldn't be recognized by the BIOS. I have another of the same hd, so I exchanged the boards. I found out that there is a problem on its board since my good hd didn't work. But the broken hd doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hd is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hd but with the wrong size (2TB). I try to make it read the hd but it get an I/O error reading sector. It tries to read, the hd spins... So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do recover the files from it?

  Read the article

• Is there a way to undo deletion of registry keys while the machine is still running?

  - by Oliver Giesen

  [ also posted from a programmer's POV at http://stackoverflow.com/questions/3299230 ] I messed up big time and deleted a large portion of my registry during a programming experiment: As a result most of the contents of HKEY_CURRENT_USER\Software\ are gone. I haven't logged off or shutdown since this happened. The applications that were already running seem to be coping fine so far but I suspect that after the next reboot there won't be much happiness left... Also, System Restore tells me there are no restore points even though I'm pretty sure there should have been. Could this be another symptom of the purged registry? I wouldn't have expected this information to be stored under HKCU, though... Does anybody know of a technique or utility that can possibly restore some or all of the deleted entries? I'm on Windows 7 Enterprise 32bit. I'm not really holding my breath but you can always hope, can't you?

  Read the article

• How do I recover data after emptying trash in OS X?

  - by MD

  I have deleted my data from my drive. The data was in trash. But then I emptied the trash. So I want to get my data back. Is this possible?

  Read the article

• how to read/recover a udf partition

  - by Toc

  I need to recover the files inside a UDF partition on my vcr external disk. Which program can I use in (preferably) Windows or Linux os?

  Read the article

• Can't recover hard drive

  - by BreezyChick89

  My drive got corrupt after a thunderstorm. It used to be 1 partition of 2.5tb but now it shows 2 partitions. It's weird because 300gig free space is about how much it had before corrupting, but it was part of the first partition. I tried $ sudo resize2fs -f /dev/sdb1 Resizing the filesystem on /dev/sdb1 to 536870911 (4k) blocks. resize2fs: Can't read an block bitmap while trying to resize /dev/sdb1 Please run 'e2fsck -fy /dev/sdb1' to fix the filesystem after the aborted resize operation. sudo e2fsck -f /dev/sdb1 e2fsck 1.42 (29-Nov-2011) The filesystem size (according to the superblock) is 610471680 blocks The physical size of the device is 536870911 blocks Either the superblock or the partition table is likely to be corrupt! Abort? n .... Error reading block 537395215 (Invalid argument) while reading inode and block bitmaps. Ignore error<y>? yes Force rewrite<y>? yes Error writing block 537395215 (Invalid argument) while reading inode and block bitmaps. Ignore error<y>? yes ... A lot of these. I can't use e2fsck -y because the first question aborts if I say "y". If I put a weight on the 'y' key it fails because none of the errors were really fixed. I asked this question before and tried using gparted but gparted fails because the first thing it does is: e2fsck -f -y -v /dev/sdb1 giving the same error. The disk status says healthy. There are no bad blocks. This is very frustrating because I can see the data in testdisk and it looks like it's all there. I already bought another 2.5tb drive and made a clone using dd. The next step if I can't fix this is to wipe that drive and just move the data with testdisk, but it seems certain folders will copy infinitely until the drive is full because of symlinks or errors so it's also a difficult option. sudo fdisk -l Disk /dev/sdb: 2500.5 GB, 2500495958016 bytes 255 heads, 63 sectors/track, 304001 cylinders, total 4883781168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0005da5e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 4294969342 2147483647+ 83 Linux sudo badblocks -b 4096 -n -o badfile /dev/sdb 610471680 536870911 badfile is empty I also tried changing the superblock with "fsck -b" but all of them are the same.

  Read the article

• How to efficiently restore Library folder partially deleted on OS X

  - by flow

  I am using OS X Lion, and trying to delete some files I did accidentally (from home directoy): rm -fr Library I realized about this some 15 seconds later and did killall rm Some folders have been deleted, of course, inside "Library". Now the system seems to be ok, but I fear what will happen in case of reboot. I have a Time Machine backup from 5 days ago. I wonder if it would be a good solution, just to copy whole "Library" folder from my home directory from backup and replace this one. Or, what do you think would be the best approach? PS: In order to restore just deleted directories inside "Library", in which order does "rm" start to delete directories, alphabetically?

  Read the article

• Dead USB flash drive

  - by Unsliced

  So a friend has come to me with a problem. They have a dead USB thumb drive which no longer responds when plugged into a machine. I've tried it in a Mac and it doesn't even respond, at least on a Windows XP machine it sees that it is there but can't show it in explorer, just that whatever is plugged in has malfunctioned. There is obviously current because the activity light on the drive illuminates. I'm looking for suggestions, please. I have access to Mac or Windows hardware and am happy to experiment (and even to pay if the solution works!) It's a bit late to recommend regular backups, but in the lack of that, what's the next best forensic advice? Edit: I should stress that, if possible, we're trying to rescue the data, after all, thumb drives are basically disposable and hardly worth the bother if there's no emotional or functional reason for wanting to rescue it!

  Read the article

• Strange loss of format on pen drive

  - by Kiewic

  Hi, here is an screenshot of my pen drive. The files are impossible to open, and the names have been replaced by strange characters. In Ubuntu is worst, the Windows system crash. What can I do to recover my information?

  Read the article

• How to recover zfs pool when root fs fails?

  - by user27138

  I have a FreeBSD 8.0 amd64 box w/ 1 ATA drive for system root and 4 SATA drives as a RAIDZ pool. The ATA drive isn't mirrored nor part of any pool, but also doesn't hold any valuable data (other then the system). How can I recover my zpool if this ATA drive fails for any reason, but assume my RAIDZ vdev SATA drives remain intact? Should I also use at least a mirror configuration for that?

  Read the article

• Uptime concerns in case of AWS outage

  - by Aditya Patawari

  I am running an Elastic Load Balancer backup by 2 instances in different Availability Zones in US East. I am using Multi-AZ RDS as well. Ideally this should ensure that if one AZ goes down, it should not effect the app because everything is spread across multiple AZs. But the recent AWS outage took the app down for a long time. I am not sure how this can happen. It would be great if someone can point out what went wrong. Major question here I have is how can I avoid this in future? I can setup app servers across different regions or even providers and use DNS for load balancing but what do I do with MySQL? Read Replicas will introduce some lag which I would want to avoid.

  Read the article

• How to fix a folder content glitch in a FAT32 filesystem?

  - by kagali-san

  at my 450gb fat32 partition, a directory has a wrong content after improper usb drive disconnect; was: /files (total 250gb) /files/folder/ /files/folder2/ /files/somethn.gs Now: /files/weir?d?name, 5 mb Windows and Linux are saying that most (400 of 450gb) disk space is occupied, but sum of all files/dirs is about 130gb, so it seems that files are still there?. No write attempts since discovery; Rejected tools/methods: chkdsk(Windows7): checking completed, but no changes. fsck.vfat: attempted to ruin drive even more (there is a lot of LFN and unicode names). EasyRecovery. Didn't see the target folder (maybe wrong scan options? tried best match, but not raw scan - it would take days since the drive is usb 5200 rpm..).

  Read the article

• Question about getting information off an old HD...

  - by user37983

  Ok so my old cpu was a sony vaio. its kinda old and had xp on it. My gf thrashed it - the cd drive went and she tried fixing it by messing with the configurations bios etc. the actual laptop is really fried the keyboard doesnt work, etc. However the harddrive is still intact. I tried putting the HD in my new cpu (toshiba runnig win7) and it looks like its gonna boot up it goes to the screen with the logo and the status bar starts to load. then it flashes a blue screen for a split second, and goes to the black screen where it says windows did not shut down properly and gives options to (start windows normally, safe mode, safe mode with networking, safe mode with prompts) ive tried every option but it always goes back to this screen. I need to get into the hd cuz i have very important files. is there anyway?

  Read the article

• What are my options for a disk with what seems to be a corrupted filesystem?

  - by CT

  I have a friend with an old Dell that will not boot into Windows. It has an IDE drive. It spins up. I have an IDE to USB device. I've attached the drive via that device to a working laptop. The drive does not mount. If I go into Disk Management I can see the drive but it will not initalize, says "Drive not ready." I've also booted into a linux live cd to see if the drive mounts, it does not. I am just trying to recover some pictures from the drive. The data is not important enough to send to a professional. The issue is more of a curosity on how to recover data if and when these situations would occur in the future.

  Read the article

• Vostro 1520 crash during bios update

  - by Deadmilkman

  My Vostro 1520 (P8700 C2D) originally came with BIOS A02. This bios version have known problems with VT, so I had to upgrade to A05. During the upgrade, the notebook crashed. Needless to say, it won't boot anymore. The simple question is: is there a way to access the bios boot block to recover the bad flash with a crisis disk? I know that the MINI and the ALIENWARE models have this feature, but I can't seem to find anything about it in the Vostro machines. Any help will be much appreciated. PS: Dell's solution is to change the motherboard, but it will take several days, as the board isn't available in my country :( Regards, Deadmilkman

  Read the article

• Windows 7 just deleted 4 days of work

  - by Mat

  Hey! I'm just a bit about to freak out. I just finished a project and rebooted my computer. It didn't want to boot anymore so I had to use the Windows 7 system repair option. It ran for a minute and then booted up. Now most of my source code from the last 4 days of work is gone! Background: sometimes (most often after installing new software) my notebook won't boot up anymore. It will just show the little Windows 7 flag, but not read from the hard disk anymore. If I hard-abort and reboot then, it asks me whether to start Windows normally (which won't work) or to run "Windows startup repair". If I run it, it does some stuff for about two or three minutes and then I can boot Windows again. Usually after this, .exe files I added to the computer during previous days are gone - but other files so far were not touched. But now, after this happened, a whole bunch of ".as" (ActionScript source files) from my project are gone! Does anyone know where and whether there's a way to recover them?

  Read the article

• Why is execution of batch files different between drag & drop and from command line?

  - by Dharma Leonardi

  Ok, so I've been trying to figure this out for hours with no progress. I have created a batch file to get details of a VHD. Everything runs fine and produces the expected results when run from the command line in a command prompt. However, when I use drag and drop from file explorer (dragging a vhd file and dropping onto the batch file) the batch file runs without errors but the output (VHD.INFO) is empty. I'm stumped. Edited to only include the behaviour: @echo off cls setlocal enabledelayedexpansion set "_PATH.THIS=%~dp0" echo HELP | diskpart > %_PATH.THIS%OUTPUT.TMP TYPE %_PATH.THIS%OUTPUT.TMP PAUSE To demonstrate the different behaviour, please run the batch file from the command line once (works) and also run the batch file by double clicking in file explorer (failure in all piping commands).

  Read the article

• Use `dd` linux program to save / recover a disk's MBR

  - by Graduate

  I have an Ubuntu OS installed on my laptop. I want to install Windows 7 as well to another disk partition (I will do it by recovering it from a special partition on my laptop). After installing Windows, I want to recover my hard drive MBR to be able to load Ubuntu. I have a plan to use linux dd program: 1) (Before installing, perform this command in Linux) dd if=/dev/sda of=/home/user/mbr_backup bs=512 count=1 2) (after installing, load Ubuntu Live CD and launch this) dd if=/home/user/mbr_backup of=/dev/sda bs=512 count=1 3) Load Ubuntu on PC and re-configure the GRUB2 to be able start Windows I need your advice, I want to be sure I won't damage the disk (it's partition table).

  Read the article

• How can I tell if my hard drive(s) have Battery Backed Write Cache?

  - by Riedsio

  How can I tell if my hard drives have a battery backed write cache (BBWC)? How can I tell if it is enabled and/or configured correctly? I don't have physical access to my server. It's a GNU/Linux box. I can provide supplemental incremental information/details as requested. My frame of reference is that of a DBA -- I have access and privileges, but (usually) only tread where I know am supposed to. :)

  Read the article

• What's a good way to move large amounts of files from one place to another, using the file path?

  - by user165253

  I'm going to move my Winamp library from its current location (in various folders inside My Documents) to My Music, but I can't just drag and drop them, as there's thousands of files within My Documents that I don't want moved. I can get the path of every single music file from Winamp, but I don't know any way to move them all. I'd like some way to maintain their current folder arrangement, and not just dump all the files in a single folder, unorganised.

  Read the article

• Can I move files from a laptop hard drive with a corrupt sector to a USB hard drive?

  - by Corey

  I have a hard drive that is on its way out and won't boot to Windows 7. The Windows partition takes up the whole disk. I thought I would try to recover some recent files that hadn't been backed up. Assuming the files are recoverable, how can I explore the drive that has the corrupt sector and transfer files to a USB hard drive? If it helps, the laptop is able to see the USB drive when choosing a boot order. Some searching lead me to WinPE 3.0, part of the Windows Automated Install Kit. Is that a method?

  Read the article

• RAID 0 disk failure, how to recover the RAID?

  - by user7985

  Situation is this. A PC with 2 hard disks, in an RAID 0 Array. The electronics on one of the disks has failed. I can not find the same board for the disk (I've tried this, removed board from the OK disk, and the second, the damaged one, works fine). I've made an image with "dd" on linux on a new hard drive (same size, not same model) and now I get "Offline member" in the RAID config screen. Will I succeed to recover the data which is stored on the drives, any help, any experience with this kind of problem. And surly, I know it was stupid to put the disks in RAID 0 and store data on them :(

  Read the article

• How to save your Linux state (suspend to disk) periodically to recover from crashes?

  - by WoLpH

  One in a while my laptop crashes/dies because of a bad/empty battery, crappy wifi driver or whatever other reason. For a while I've wondered if it's possible to force Linux to periodically save the state (like vmware snapshots) to disk so you can restore from that with possibly slightly outdated work but at least with all of your apps open in the same state you've left them. I don't really see the point in having to boot everything from cratch constantly, although KDE saves your state on logout, that doesn't happen periodically (by default) either. It would make it much nicer to recover from your crashes if your ram was written to disk periodically. Anyone know if there's a system call to do this without also shutting down the machine? Even a manual button to save the entire state would be nice.

  Read the article

• Recover snap server data

  - by Ugg

  Hi I have a snap server 110 the machine powers on ok and the healthcheck passes but unable to connect no responce on the assigned ip or any ability to reach the device via the snap server manager. Believe the device is powering on but not loading the OS. Tried pulling the disk running and hooking up to a windows PC via USB, and using disk internals linux reader I am unable to access two of the partitions. ( one of which is the large data partition). There are three partitions on the the drice only one is accessible via Linux reader. I am looking to recover the data of the drive can anyone suggest a DIY option please?

  Read the article

• How do I get SSIS Data Flow to put '0.00' in a flat file?

  - by theog

  I have an SSIS package with a Data Flow that takes an ADO.NET data source (just a small table), executes a select * query, and outputs the query results to a flat file (I've also tried just pulling the whole table and not using a SQL select). The problem is that the data source pulls a column that is a Money datatype, and if the value is not zero, it comes into the text flat file just fine (like '123.45'), but when the value is zero, it shows up in the destination flat file as '.00'. I need to know how to get the leading zero back into the flat file. I've tried various datatypes for the output (in the Flat File Connection Manager), including currency and string, but this seems to have no effect. I've tried a case statement in my select, like this: CASE WHEN columnValue = 0 THEN '0.00' ELSE columnValue END (still results in '.00') I've tried variations on that like this: CASE WHEN columnValue = 0 THEN convert(decimal(12,2), '0.00') ELSE convert(decimal(12,2), columnValue) END (Still results in '.00') and: CASE WHEN columnValue = 0 THEN convert(money, '0.00') ELSE convert(money, columnValue) END (results in '.0000000000000000000') This silly little issue is killin' me. Can anybody tell me how to get a zero Money datatype database value into a flat file as '0.00'?

  Read the article

• xcodebuild: error: 'file' is not a workspace file

  - by Vladimir Voitekhovski

  there were no problem but now my job in Jenkins CI failed. I try to rename Xcode workspace like RacingPost.xcworkspace no changes. Try to delete this options at all, this job also failed. Configuration: XCODEPROJECTDIRECTORY=. TARGET_BUILD_DIR=${XCODEPROJECTDIRECTORY}/build XCODEWORKSPACE=RacingPost.xcodeproj XCODESCHEME=UnitTests XCODECONFIGURATION=ENTERPRISE-HD XCODESDK=iphoneos XCODEARGS="TEST_AFTER_BUILD=YES" XCODEBUILD_APP_NAME=RacingPost.app XCODETARGET=UnitTests XCODEPROJECT=RacingPost.xcodeproj IPA_PATH=${TARGET_BUILD_DIR}/RacingPost.ipa xcrun -sdk iphoneos PackageApplication -v "$(${XCTOOL_HOME}/xctool.sh -scheme RacingPost -project ${XCODEPROJECT} -configuration "${XCODECONFIGURATION}" -sdk "${XCODESDK}" -showBuildSettings -workspace ${WORKSPACE}| grep TARGET_BUILD_DIR | cut -d = -f 2 | cut -d . -f 1 | head -1 | sed 's/^[ ^t]*//')/${XCODEBUILD_APP_NAME}" -o "${IPA_PATH}" Output: 17:33:25 ** BUILD SUCCEEDED ** (58104 ms) 17:33:27 [RGP-ODC_RacingPost_iPad_staging] $ /bin/bash -xe /var/folders/df/575wx61n4dzdlw_48pgsjwk40000gn/T/hudson6052564280091633098.sh 17:33:27 + cd . 17:33:27 ++ /Users/epadmin/ci-tools/xctool/xctool.sh -scheme RacingPost -project RacingPost.xcodeproj - configuration ENTERPRISE-HD -sdk iphoneos -showBuildSettings -workspace /Users/epadmin/jenkins-slave/workspace/RGP- ODC_RacingPost_iPad_staging 17:33:27 ++ grep TARGET_BUILD_DIR 17:33:27 ++ cut -d = -f 2 17:33:27 ++ cut -d . -f 1 17:33:27 ++ head -1 17:33:27 ++ sed 's/^[ ^t]*//' 17:33:30 xcodebuild: error: '/Users/epadmin/jenkins-slave/workspace/RGP-ODC_RacingPost_iPad_staging' is not a workspace file. 17:33:30 + xcrun -sdk iphoneos PackageApplication -v /RacingPost.app -o ./build/RacingPost.ipa 17:33:30 error: Specified application doesn't exist or isn't a bundle directory : '/RacingPost.app' 17:33:30 Build step 'Execute shell' marked build as failure My structure of folders on node: epadmin@epclus1macp02:~/jenkins-slave/workspace/RGP-ODC_RacingPost_iPad_staging$ ls drwxr-xr-x 21 epadmin staff 714B May 29 10:28 ./ drwxr-xr-x 37 epadmin staff 1.2K May 29 10:33 ../ drwxr-xr-x 7 epadmin staff 238B May 29 10:28 .svn/ drwxr-xr-x 10 epadmin staff 340B Apr 18 09:02 RacingPost/ drwxr-xr-x 10 epadmin staff 340B May 29 09:27 RacingPost.xcodeproj/ drwxr-xr-x 10 epadmin staff 340B May 7 09:04 RacingPostUtilApp/ drwxr-xr-x 3 epadmin staff 102B May 18 02:16 Source/ drwxr-xr-x 75 epadmin staff 2.5K Apr 16 09:03 UnitTests/ drwxr-xr-x 16 epadmin staff 544B May 29 09:05 _certs/ drwxr-xr-x 3 epadmin staff 102B Apr 15 09:03 _doc/ drwxr-xr-x 4 epadmin staff 136B Apr 15 09:03 _provisioning/ drwxr-xr-x 3 epadmin staff 102B May 29 10:31 build/ -rw-r--r-- 1 epadmin staff 9.9K May 19 04:39 build.xml

  Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >