Search Results

Search found 12895 results on 516 pages for 'multi boot'.

Page 113/516 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

  • Mac Air Bootcamp Windows 7 Installation and USB3 Hurdles

    - by Casey
    I am trying to load windows 7 on a new Mac Air(OS X 10.9 Mavericks) using Boot camp, a downloaded windows 7 iso file, and USB3 flash drive. No obvious issues with stepping through the initial phases of boot camp and disc partition, but when the system reboots to load windows setup/install from the USB3 flash, it stalls after a few screens and gives a "missing cd/dvd drive" error. I have read similar posts regarding this fail that imply there is possibly a windows 7 compatibility concern with USB3, and that if a USB2 port is available....or if you can change your BIOS to make your USB3 look like USB2...then you can get around this error. Unfortunately I only have USB3 ports on this system, and it appears accessing the PC equivalent "BIOS" on the new Macs is very difficult....and if you screw it up you can ruin the system. Does anyone have any suggestions? I should also mention that there is NOT a CD/DVD drive on the Mac Air....and I can't migrate to Windows8 (for various reasons). Any help is much appreciated!!

    Read the article

  • DVD ROM is not working

    - by Cyril N.
    (note: I don't know in which StackExchange site to put this question, I'll thank the moderator that will move it to a more appropriate place, if there is a S.E. available for my question). I have a DVD RW drive that is well listed in the bios, and if no CD is in, it is also present in the "My Computer" of my Fedora 16. But when I put a disc on it, the icon disapear from "My Computer", and I can not do anything with this ! (Like erasing a RW disc). I'd like to boot a Fedora 17 Live CD image. I burned it on an other computer but when I try to run it in bios, nothing is done and I'm redirected to Grub of my HD. The command cdrecord -scanbus shows this : wodim: Warning: controller returns wrong size for CD capabilities page. wodim: Cannot get CD capabilities data. 6,1,0 601) 'HD-DT%ST' 'DVD%RAM G@22NP20' '1&04' Removable CD-ROM And when I try to mount manually the disc, I got this error : mount: block device /dev/sr0 is write-protected, mounting read-only mount: /dev/sr0: can't read superblock Here's a paste of dmesg | grep sr0 : [ 5.161265] sr0: scsi-1 drive [ 5.161621] sr 6:0:1:0: Attached scsi CD-ROM sr0 [ 834.545978] sr0: Hmm, seems the drive doesn't support multisession CD's [ 841.731194] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 842.021640] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 842.021652] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 842.021662] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 842.021672] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [ 842.021688] end_request: I/O error, dev sr0, sector 0 [ 842.021697] Buffer I/O error on device sr0, logical block 0 [ 842.023715] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.048203] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.048211] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.048219] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.048234] end_request: I/O error, dev sr0, sector 0 [ 843.048274] EXT4-fs (sr0): unable to read superblock [ 843.063155] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.075904] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.220512] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.220522] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.220530] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.220538] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.220553] end_request: I/O error, dev sr0, sector 0 [ 843.220609] FAT-fs (sr0): unable to read boot sector The lines from Sense Key .. (line 6) to DRIVER_SENSE (line 11) are repeating a lot. I then changed my DVD player with an other spare one I had, and the disc didn't boot neither. I then changed the IDE cable, but still no success. What can I do to make it work? Thanks for your help.

    Read the article

  • Computer cannot detect hard disk

    - by Nrew
    Details: BIOS: AMI Bios, set primary master to Auto OS: Windows XP Sp2 Memory: 384 Mb Processor: Pentium 3 yeah this one is really very old. And some of the capacitors in the motherboard are already bulging. It detected the hdd yesterday when were trying to fix it and install xp. But today it cannot boot and said: Boot failure. What can you suggest that I would do to revive this old machine. What would be the problem, is it the hdd, the ide cable or the motherboard.

    Read the article

  • HP proliant dl360 g5 fails to reboot

    - by user1039384
    Some history of this also available here. As of my latest update on the forum linked above, now cold reboot as well as hard reset and following boot for my proliant dl360 g5 works as expected and successfully boot the system. However, soft-reboot results in internal health indicator turning RED on the front and long beeps every around 6seconds until I either cold reboot or press and hold the power button. A summary of system state when this happens: Internal Health led indicator: RED External Health led indicator: Green No led next to any component is red or amber No POST message neither on the video output nor on IML logs (verified both at the time issue occures and after cold reboot that boots the system successfully). Any thoughts please share. I hope we can knock this issue down together with your help!

    Read the article

  • How to install OSX into VirtualBox on a Macbook Air using Apple's Reinstall USB

    - by eug
    I'm currently dual-booting OSX and Ubuntu on my Macbook Air, but it'd be nice to run OSX within Ubuntu via VirtualBox. This seems possible using VirtualBox and is legal - there's even a post on an Oracle blog describing this: http://blogs.oracle.com/karim/entry/installing_mac_os_x_in. Actually, I've read elsewhere that it's only legal with OSX Server, but can't find a reason why it'd be illegal with normal OSX - please let me know if you think otherwise. The problem I have is that a MacBook Air doesn't come with a bootable DVD, but with a "Reinstall Drive" which is a USB stick that comes up as a CDROM drive. It doesn't seem to be ISO9660-formatted though but has an Apple partition table, with OSX installed on an HFS partition. refit says that it has a "boot.efi" as well. I don't know Apple booting/partitioning very well and would really appreciate some advice on how to convert this USB into an ISO or boot it in VirtualBox some other way.

    Read the article

  • How can I create an encrypted, bootable thumbdrive containing Linux?

    - by Hanno Fietz
    I want to have a bootable flash drive that's fully encrypted. I have not tested, but seem to like, TrueCrypt, which provides a fully encrypted system and has lots of other features I like (for instance, hidden volumes). Unfortunately, it seems, system encryption is only supported for Windows, although I'm not sure why. The crux here, I guess, is that you need a boot loader that is capable of asking for your password and decrypt the disk, at least the part that contains kernel and initrd. An alternative might be to have an unencrypted boot partition containing a more powerful system which will decrypt and mount the main partition. However, this brings up the question of whether you're introducing data leaks. Depending on the specific scenario, I may lack the experience to assess if this is a problem. So I'd strongly prefer a fully encrypted disk or a similarly straightforward alternative.

    Read the article

  • install grub on disk image

    - by Dima
    I have disk image with 2 partitions: Partition 1 has cramfs file system (read only). This partition contains all system files of the OS Partition 2 has ext3 file system. This partition has only configuration files that may be changed. How can I install GRUB1 boot loader on MBR. I tried to copy first 446 bytes of my hard disk and copy GRUB files to the /boot directory on the 1st (cramfs) partition. I cannot use grub-install because I have disk image and not disk itself. Any ideas?

    Read the article

  • How to create an UEFI bootable USB stick from an ISO

    - by shiin
    I have an ISO image of my backup solution's recovery cd. When I burn the image to a CD-ROM, I can boot from it in UEFI or normal mode without problems. Unfortunately, this is no solution for my laptop, as it does not have an optical drive. Thus, I tried to create a bootable USB stick that can also boot in UEFI mode, but so far I have not been successful (note that the laptop has UEFI and boots Windows 7 in UEFI mode). So my question is, if anyone knows how I can get said ISO on my USB stick so that it boots as if I would use a CD-ROM?

    Read the article

  • Wake up and record in Windows Media Center on a Mac Mini

    - by Sir Code-A-Lot
    I'm currently considering buying a Mac Mini to use as a media center. I plan to install Windows 7 (or 8) on it, using Boot Camp. Will it be able to go into standby or hibernate (S3, S4?) and wake up to record TV scheduled in Windows Media Center? I haven't been able to find concrete information on supported standby types when running Windows under boot camp, and if Windows will even be able to wake when a recording should start. I just want to be clear on any limitations in this area before I buy anything.

    Read the article

  • How can I make Windows XP bootable again?

    - by Scott Severance
    Some time ago, I replaced my hard drive. Foolishly, I imaged the individual partitions, not the entire drive. That meant that my system was unbootable. For my primary OS (Linux), that was no problem as I could simply re-run GRUB. However Windows XP remains unbootable. The machine in question is a netbook which doesn't have a CD drive or a restore partition, so I can't boot from a Windows CD and run fixmbr. How can I fix Windows? Here's a picture of what I see when I try to boot Windows from the GRUB menu: I don't actually have an XP CD, since of my two machines, the netbook in question has neither a restore partition nor a CD, and my other XP machine only came with a restore partition. So I'll also need a way to get hold of the necessary files.

    Read the article

  • How to tell which physical disks have bootable MBR?

    - by Jon
    The computer I am using right now has 6 physical disks attached. Using the BIOS's "select boot device" functionality I have discovered that I can boot off 3 of these disks into the exact same bootloader. This means that all of these disks have the bootable flag set on their MBR, even though I had been under the impression that only 2 of them are in fact bootable. My question is: is there an easy way to check which disks have a bootable MBR with a command line tool or some OS utility? I am aware of the DISKPART tool and its basic functionality, but I haven't found how to view the information I need. The OS is Windows 7 x64 Ultimate with SP1.

    Read the article

  • Issue with Toshiba Satellite C50 A-1JM

    - by Nathan Hawkes
    I am having some odd problems with my Toshiba laptop. For the last two days, it has not loaded past the boot screen for hours, if at all. When I force the laptop off and switch it back on, it goes to the Preparing Automatic Repair process but will not complete the process and go to the desktop. However, this only happens when the battery is plugged in. When I remove the battery and run the laptop on power, it works without issue. Would this be a battery issue (given it works without the battery) or a hard drive issue (given it won't get past the boot screen)? If neither, what would you suggest as a solution?

    Read the article

  • Windows 7 Bootcamp to see data doubler SATA SSD in Optical Bay Connector

    - by bumble_bee_tuna
    Hi I purchased a OWC data doubler http://eshop.macsales.com/item/OWC/DDAMBS0GB/ ... Long story short it lets you add a second HD to your macbook pro in place of the cd/dvd drive (which is useless anyway, impossible to get stuff out when stuck). My current setup is 600gb intel SSD bootdrive 100gb partition for OSX / 500gb for Windows 7 Prof from Bootcamp (use 99 % of time). My desire is to have a second 300gb SSD to run disk intensive VM's off of. So I added a second 300gb intel SSD (again, NO desire to boot off of) on the sata optical port. I can see the drive no problem if I boot in to OSX, however, can't see it in disk management on Win7 ??? Any ideas similar experience ... Funny thing is I can see it in "Device Manager Disk Drivers" but not Disk Management ??? Also no I don't want to use Fusion/Parallels this is a waste of resources for me.

    Read the article

  • PC boots on then off & 30 sec. later on again, it wiil shut off on itself mostly in idle or just unexpecticly

    - by Jody
    This problem started w/ my sons desktop, it would just shut off after a bit of work or stay on for a long time & to get it to unfreeze is to cold boot it, i put a new HDD in & I still have the same issue, RAM is good power supply fan is moving quite as well as all the rest of the fans it has stayed fairly dust free, i'm at a loss ,I have defaulted all the factory settings changed battery & ungraded to a new OS. I still have the same problem. the power light stays on after it has shut down & when upon starting it goes straight to safe mode option page, I start in last good config. reboots again takes 30 sec. to boot & will work again for a while, the only other thing I haven't tried was a graphic card replace, i'm onboard video now & have been.

    Read the article

  • Gigabyte GA-Z77X-D3H MB problems

    - by Hans
    I installed a new system last week. I've some issues with it. The system consists of a: Gigabyte GA-Z77X-D3H with F9 BIOS (latest) Intel Core i5 3570K proccesor Sapphire Radeon HD7850 2x 8GB Corsair 1600MHz memory OCZ Vertex 2 120G SSD Connected peripherals : 2 Samsung 940BF (1 via DVI on GFX card, 1 via an Displayport to DVI adapter) 1 Dell U2312HM monitor (displayport) Dell USB Hub (monitor) Wired mouse, wireless keyboard (logitech) Logitch G25 wheel Canon MP800 printer Okay, my issues are the following: if I plug in 1 or more monitor at DisplayPort during boot, most of the time it won't boot properly. I get an empty message screen of UEFI: only the header GIGABYTE DUEL BIOS appears. The system reboots itself, turns on for a few seconds (no video) and then reboots again. Now it starts all over again. This repeats until I remove all displayport monitors. Windows boots, and I can use them when I replug them. The graphics card has been running fine for a few weeks on an older system (intel Q6600). Another issue is; if I plug in my G25 steering wheel, the UEFI BIOS is inaccessible. It either gives the same empty UEFI screen, or the BIOS screen is rendering but crashes half way (so pieces of text and graphics are missing, and it has crashed). If I remove the G25, all is fine. To verify the graphics card is OK and the motherboard is causing these issues, I tried an NVIDIA 8800GT graphics card. This hasn't got Displayport, but it also cannot boot the BIOS with the G25 wheel plugged in. The PC also refuses to go into or out of standby. It just hangs when going into standby, and in other occasions (when it does succesfully do so) get out of standby. Power supply is OCZ StealthXStream 600W. Proccesor is 25 - 30C idle, ~55C stressed (Scythe Mugen 2). I am really puzzled what can be done to resolve this. I am not really waiting for an RMA request (otherwise I will return the MB for another type), because it will likely mean I have to wait very long before I get a replacement. Anyone else with a similar experience on this board/chipset or can help me troubleshoot this?

    Read the article

  • Bootable ISO to USB stick xp wuickest method

    - by brux
    My dog took a leak on my PC when I went out (ye funny), now it reandomly restarts - im convinced the HDD is failing because the Windows seagate diagnostic program fails on a few tests. I want to run this prior to windows in an attempt to try and recover sectors, the program includes an iso which can be written to cd and booted, but i dont have any cd's. I tried using unetbootin to create the bootable usb from the iso file (SeaToolsDOS222ALL.576.ISO) but it doesnt work. When i boot from the usb hdd unetbootin loads with "default" in the menu. No joy booting though. I checked the usb hdd in windows and all the files are there, extracted from the iso file, wont boot though. Any ideas? Im using windows xp, or

    Read the article

  • How can I run 2 already installed OS at the same time?

    - by eran
    I have Win7 and Ubuntu installed on my PC, and I can choose which to run at boot time. I would like to be able to run the Ubuntu from within the Win7. Tools like VMWare allows one to create a new installation of a guest OS, which could then be run alongside the hosting OS. However, I already have the Ubuntu fully installed on my hard drive, and I'd like to maintain the dual boot option. Ideally, I'd like to be able to create a new virtual machine on my Win7, but instead of installing a new guest OS, just direct it to the existing installation. Is that possible?

    Read the article

  • Removing a malware that sets up as a system driver

    - by ereOn
    Hello, I recently tried to fix up my mother's computer which has some serious malwares. One of them apparently registered itself as system driver (tjbijkoq.sys if that can help) and after running a malware suppression tool, the computer won't boot anymore, complaining about a "critical driver that is missing". I think deleting the matching entry in the registry would just solve the problem, but obviously I can't boot up the computer (even in safe mode) to fix it. Do you guys have any experience with such an issue and how to solve this ? Thank you very much. The operating system is Windows Vista 32 bits Professional

    Read the article

  • Booting a GPT USB key on older BIOS laptop

    - by fonix232
    I have an old HP EliteBook 8530p, which does not support booting from GPT USB (GPT HDDs are fine though). Lately I had the wish to have a fast-to-start OS for browsing, smaller web tasks, etc., so I grabbed a ChromeOS build (latest one by ArnoldTheBat), flashed it on an 8GB flash drive, and popped it in. It did not boot, so I dug deeper and discovered that it actually is GPT, and cannot be converted to MBR. As my laptop does not support UEFI booting from USB (there's a really-really beta UEFI support in the BIOS, but as I said, it only supports GPT hard drives, not USB devices), I'm stuck. Is there any way of booting it, say, another flash drive with a specific boot loader/manager (e.g. Plop)?

    Read the article

  • Script errors when run by launchd at startup, but not when run in Terminal

    - by Mechcozmo
    I'm attempting to create a RAM disk that loads the previous contents when the system starts up, and every six hours writes the contents to a disk image. Currently, when you run the script from the terminal ("sudo bash LogToRAM.sh") everything works fine. But when run from launchd during startup, it doesn't work. Here's the lines from the log; the first line just gives some idea as to where in the boot process we are: SecurityAgent[202] Showing Login Window com.mechcozmo.LogToRAM[51] + /Developer/usr/bin/SetFile -a V /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] ERROR: File Not Found. (-43) on file: /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] + /usr/sbin/asr -source '/Library/Application Support/LogToRAM/RAMdisk_store.dmg' -target /Volumes/LogfileRAMdisk/ -noverify Here is the script and plist file in question. Note that 'set -vx' is up at the top of the script; it give a lot of information about what is happening in the script. My current theory is that the /Volumes directory does not exist at this stage of the boot process, but that seems unlikely to be honest.

    Read the article

  • What determines the time to first ping response in an OS?

    - by Stuart Woodward
    When a server (say Windows, Linux) is rebooted, it will take some time to respond to ping. I'm assuming that the software firewall has to be up before pings will be returned as there might be a setting to disable ping responses. Everyone knows that Windows and Linux have have totally different architectures so lets treat them separately. The answer I'm looking for is "After XXX is running, pings will be returned." It would be helpful to know where in the boot order this is too. i.e. at the start or end. I ask because we get questions from a customer about why it takes so long to respond to ping after creating a Virtual Machine. I'm sure this is just an artefact of the OS boot behaviour.

    Read the article

  • How is the 137GB limit counted in Virtual PC (two systems on one disk)?

    - by Nux
    I have a dual boot (Win7, XP) physical machine on my old computer which I want to virtualize and move to my new one. So I've uninstalled everything that I can and run shrink from RescueCD (used GParted). Now I have two about 80GiB partitions with a gap between them, so still this seem to be above the given limit. Still the resulting VHD (made with Disk2vhd) is much below the limit (about 110GiB) and both partitions are below the limit. So my question is - is it failing due to the limitations of disk size for VPC or is failing simply because it's a dual boot system. Or maybe it would work if I would move partitions to be close to each other (the gap between them is about 171GB and the whole physical disk is 1TB)?

    Read the article

  • Can Grub be configured to remember the last OS you booted into?

    - by Matthew
    I typically have 2-3 OSes in my boot menu: Ubuntu 10.04 Windows 7 [Sometimes, a third option, such as Ubuntu 10.04 Netbook] If I am in an OS other than the default choice (Windows 7 in this case), and I reboot, Grub boots into Ubuntu 10.04. This shouldn't happen--when I reboot in Windows 7, I want to stay in Windows 7. Is there any way to configure Grub to remember my last choice, and boot into that? Alternatively, it would be even better if Grub only did this when I rebooted (not when I first turn the computer on). I realize this may not be possible, so I'd be happy with simple last-choice-remembering.

    Read the article

  • Any programs for getting rid of .DS_Store files? [closed]

    - by mcandre
    Possible Duplicate: How to prevent Mac OS X creating .DS_Store files on non Mac (HFS) Volumes? I dual boot between Mac and Windows. When I browse my Windows partition with Finder, it drops little .DS_Store turds all over the folders. They show up when I boot back into Windows. Right now I've got one on my Desktop, sigh. Are there any (free) programs I can use to stop this from happening? I know, I know, there's a Finder setting to stop dropping .DS_Store files on network drives, but my local Windows partition is NOT a network drive.

    Read the article

  • Why do I get a GRUB error after deleting the Linux partition?

    - by nateify
    I had a dual-boot setup with Windows 7 and Windows Vista. I used Easus Partition Manager and shrank my Windows 7 partition. In the empty space, I installed Linux Mint. I decided I didn't want it anymore, I simply deleted the Linux Mint partition. Now when I boot, all I get is this: GRUB loading. error: no such partition grub rescue> I don't have my Windows 7 install disk because it was pre-installed.

    Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >