Search Results

Search found 2806 results on 113 pages for 'notes'.

Page 113/113 | < Previous Page | 109 110 111 112 113 

  • Why do I get Detached Entity exception when upgrading Spring Boot 1.1.4 to 1.1.5

    - by mmeany
    On updating Spring Boot from 1.1.4 to 1.1.5 a simple web application started generating detached entity exceptions. Specifically, a post authentication inteceptor that bumped number of visits was causing the problem. A quick check of loaded dependencies showed that Spring Data has been updated from 1.6.1 to 1.6.2 and a further check of the change log shows a couple of issues relating to optimistic locking, version fields and JPA issues that have been fixed. Well I am using a version field and it starts out as Null following recommendation to not set in the specification. I have produced a very simple test scenario where I get detached entity exceptions if the version field starts as null or zero. If I create an entity with version 1 however then I do not get these exceptions. Is this expected behaviour or is there still something amiss? Below is the test scenario I have for this condition. In the scenario the service layer that has been annotated @Transactional. Each test case makes multiple calls to the service layer - the tests are working with detached entities as this is the scenario I am working with in the full blown application. The test case comprises four tests: Test 1 - versionNullCausesAnExceptionOnUpdate() In this test the version field in the detached object is Null. This is how I would usually create the object prior to passing to the service. This test fails with a Detached Entity exception. I would have expected this test to pass. If there is a flaw in the test then the rest of the scenario is probably moot. Test 2 - versionZeroCausesExceptionOnUpdate() In this test I have set the version to value Long(0L). This is an edge case test and included because I found reference to Zero values being used for version field in the Spring Data change log. This test fails with a Detached Entity exception. Of interest simply because the following two tests pass leaving this as an anomaly. Test 3 - versionOneDoesNotCausesExceptionOnUpdate() In this test the version field is set to value Long(1L). Not something I would usually do, but considering the notes in the Spring Data change log I decided to give it a go. This test passes. Would not usually set the version field, but this looks like a work-around until I figure out why the first test is failing. Test 4 - versionOneDoesNotCausesExceptionWithMultipleUpdates() Encouraged by the result of test 3 I pushed the scenario a step further and perform multiple updates on the entity that started life with a version of Long(1L). This test passes. Reinforcement that this may be a useable work-around. The entity: package com.mvmlabs.domain; import javax.persistence.Column; import javax.persistence.Entity; import javax.persistence.GeneratedValue; import javax.persistence.GenerationType; import javax.persistence.Id; import javax.persistence.Table; import javax.persistence.Version; @Entity @Table(name="user_details") public class User { @Id @GeneratedValue(strategy=GenerationType.AUTO) private Long id; @Version private Long version; @Column(nullable = false, unique = true) private String username; @Column(nullable = false) private Integer numberOfVisits; public Long getId() { return id; } public void setId(Long id) { this.id = id; } public Long getVersion() { return version; } public void setVersion(Long version) { this.version = version; } public Integer getNumberOfVisits() { return numberOfVisits == null ? 0 : numberOfVisits; } public void setNumberOfVisits(Integer numberOfVisits) { this.numberOfVisits = numberOfVisits; } public String getUsername() { return username; } public void setUsername(String username) { this.username = username; } } The repository: package com.mvmlabs.dao; import org.springframework.data.repository.CrudRepository; import com.mvmlabs.domain.User; public interface UserDao extends CrudRepository<User, Long>{ } The service interface: package com.mvmlabs.service; import com.mvmlabs.domain.User; public interface UserService { User save(User user); User loadUser(Long id); User registerVisit(User user); } The service implementation: package com.mvmlabs.service; import org.springframework.beans.factory.annotation.Autowired; import org.springframework.stereotype.Service; import org.springframework.transaction.annotation.Propagation; import org.springframework.transaction.annotation.Transactional; import org.springframework.transaction.support.TransactionSynchronizationManager; import com.mvmlabs.dao.UserDao; import com.mvmlabs.domain.User; @Service @Transactional(propagation=Propagation.REQUIRED, readOnly=false) public class UserServiceJpaImpl implements UserService { @Autowired private UserDao userDao; @Transactional(readOnly=true) @Override public User loadUser(Long id) { return userDao.findOne(id); } @Override public User registerVisit(User user) { user.setNumberOfVisits(user.getNumberOfVisits() + 1); return userDao.save(user); } @Override public User save(User user) { return userDao.save(user); } } The application class: package com.mvmlabs; import org.springframework.boot.SpringApplication; import org.springframework.boot.autoconfigure.EnableAutoConfiguration; import org.springframework.context.annotation.ComponentScan; import org.springframework.context.annotation.Configuration; @Configuration @ComponentScan @EnableAutoConfiguration public class Application { public static void main(String[] args) { SpringApplication.run(Application.class, args); } } The POM: <?xml version="1.0" encoding="UTF-8"?> <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd"> <modelVersion>4.0.0</modelVersion> <groupId>com.mvmlabs</groupId> <artifactId>jpa-issue</artifactId> <version>0.0.1-SNAPSHOT</version> <packaging>jar</packaging> <name>spring-boot-jpa-issue</name> <description>JPA Issue between spring boot 1.1.4 and 1.1.5</description> <parent> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-starter-parent</artifactId> <version>1.1.5.RELEASE</version> <relativePath /> <!-- lookup parent from repository --> </parent> <dependencies> <dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-starter-data-jpa</artifactId> </dependency> <dependency> <groupId>org.hsqldb</groupId> <artifactId>hsqldb</artifactId> <scope>runtime</scope> </dependency> <dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-starter-test</artifactId> <scope>test</scope> </dependency> </dependencies> <properties> <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding> <start-class>com.mvmlabs.Application</start-class> <java.version>1.7</java.version> </properties> <build> <plugins> <plugin> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-maven-plugin</artifactId> </plugin> </plugins> </build> </project> The application properties: spring.jpa.hibernate.ddl-auto: create spring.jpa.hibernate.naming_strategy: org.hibernate.cfg.ImprovedNamingStrategy spring.jpa.database: HSQL spring.jpa.show-sql: true spring.datasource.url=jdbc:hsqldb:file:./target/testdb spring.datasource.username=sa spring.datasource.password= spring.datasource.driverClassName=org.hsqldb.jdbcDriver The test case: package com.mvmlabs; import org.junit.Assert; import org.junit.Test; import org.junit.runner.RunWith; import org.springframework.beans.factory.annotation.Autowired; import org.springframework.boot.test.SpringApplicationConfiguration; import org.springframework.test.context.junit4.SpringJUnit4ClassRunner; import com.mvmlabs.domain.User; import com.mvmlabs.service.UserService; @RunWith(SpringJUnit4ClassRunner.class) @SpringApplicationConfiguration(classes = Application.class) public class ApplicationTests { @Autowired UserService userService; @Test public void versionNullCausesAnExceptionOnUpdate() throws Exception { User user = new User(); user.setUsername("Version Null"); user.setNumberOfVisits(0); user.setVersion(null); user = userService.save(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(1), user.getNumberOfVisits()); Assert.assertEquals(new Long(1L), user.getVersion()); } @Test public void versionZeroCausesExceptionOnUpdate() throws Exception { User user = new User(); user.setUsername("Version Zero"); user.setNumberOfVisits(0); user.setVersion(0L); user = userService.save(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(1), user.getNumberOfVisits()); Assert.assertEquals(new Long(1L), user.getVersion()); } @Test public void versionOneDoesNotCausesExceptionOnUpdate() throws Exception { User user = new User(); user.setUsername("Version One"); user.setNumberOfVisits(0); user.setVersion(1L); user = userService.save(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(1), user.getNumberOfVisits()); Assert.assertEquals(new Long(2L), user.getVersion()); } @Test public void versionOneDoesNotCausesExceptionWithMultipleUpdates() throws Exception { User user = new User(); user.setUsername("Version One Multiple"); user.setNumberOfVisits(0); user.setVersion(1L); user = userService.save(user); user = userService.registerVisit(user); user = userService.registerVisit(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(3), user.getNumberOfVisits()); Assert.assertEquals(new Long(4L), user.getVersion()); } } The first two tests fail with detached entity exception. The last two tests pass as expected. Now change Spring Boot version to 1.1.4 and rerun, all tests pass. Are my expectations wrong? Edit: This code saved to GitHub at https://github.com/mmeany/spring-boot-detached-entity-issue

    Read the article

  • dbus dependency with yum

    - by Hengjie
    Whenever, I try and run yum update I get the following error: [root@server ~]# yum update Loaded plugins: dellsysid, fastestmirror Loading mirror speeds from cached hostfile * base: mirror01.idc.hinet.net * extras: mirror01.idc.hinet.net * rpmforge: fr2.rpmfind.net * updates: mirror01.idc.hinet.net Excluding Packages in global exclude list Finished Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package NetworkManager.x86_64 1:0.7.0-13.el5 set to be updated ---> Package NetworkManager-glib.x86_64 1:0.7.0-13.el5 set to be updated ---> Package SysVinit.x86_64 0:2.86-17.el5 set to be updated ---> Package acl.x86_64 0:2.2.39-8.el5 set to be updated ---> Package acpid.x86_64 0:1.0.4-12.el5 set to be updated ---> Package apr.x86_64 0:1.2.7-11.el5_6.5 set to be updated ---> Package aspell.x86_64 12:0.60.3-12 set to be updated ---> Package audit.x86_64 0:1.8-2.el5 set to be updated ---> Package audit-libs.x86_64 0:1.8-2.el5 set to be updated ---> Package audit-libs-python.x86_64 0:1.8-2.el5 set to be updated ---> Package authconfig.x86_64 0:5.3.21-7.el5 set to be updated ---> Package autofs.x86_64 1:5.0.1-0.rc2.163.el5 set to be updated ---> Package bash.x86_64 0:3.2-32.el5 set to be updated ---> Package bind.x86_64 30:9.3.6-20.P1.el5 set to be updated ---> Package bind-libs.x86_64 30:9.3.6-20.P1.el5 set to be updated ---> Package bind-utils.x86_64 30:9.3.6-20.P1.el5 set to be updated ---> Package binutils.x86_64 0:2.17.50.0.6-20.el5 set to be updated ---> Package centos-release.x86_64 10:5-8.el5.centos set to be updated ---> Package centos-release-notes.x86_64 0:5.8-0 set to be updated ---> Package coreutils.x86_64 0:5.97-34.el5_8.1 set to be updated ---> Package cpp.x86_64 0:4.1.2-52.el5 set to be updated ---> Package cpuspeed.x86_64 1:1.2.1-10.el5 set to be updated ---> Package crash.x86_64 0:5.1.8-1.el5.centos set to be updated ---> Package cryptsetup-luks.x86_64 0:1.0.3-8.el5 set to be updated ---> Package cups.x86_64 1:1.3.7-30.el5 set to be updated ---> Package cups-libs.x86_64 1:1.3.7-30.el5 set to be updated ---> Package curl.x86_64 0:7.15.5-15.el5 set to be updated --> Processing Dependency: dbus = 1.1.2-15.el5_6 for package: dbus-libs ---> Package dbus.x86_64 0:1.1.2-16.el5_7 set to be updated ---> Package dbus-libs.x86_64 0:1.1.2-16.el5_7 set to be updated ---> Package device-mapper.x86_64 0:1.02.67-2.el5 set to be updated ---> Package device-mapper-event.x86_64 0:1.02.67-2.el5 set to be updated ---> Package device-mapper-multipath.x86_64 0:0.4.7-48.el5_8.1 set to be updated ---> Package dhclient.x86_64 12:3.0.5-31.el5 set to be updated ---> Package dmidecode.x86_64 1:2.11-1.el5 set to be updated ---> Package dmraid.x86_64 0:1.0.0.rc13-65.el5 set to be updated ---> Package dmraid-events.x86_64 0:1.0.0.rc13-65.el5 set to be updated ---> Package dump.x86_64 0:0.4b41-6.el5 set to be updated ---> Package e2fsprogs.x86_64 0:1.39-33.el5 set to be updated ---> Package e2fsprogs-devel.x86_64 0:1.39-33.el5 set to be updated ---> Package e2fsprogs-libs.x86_64 0:1.39-33.el5 set to be updated ---> Package ecryptfs-utils.x86_64 0:75-8.el5 set to be updated ---> Package file.x86_64 0:4.17-21 set to be updated ---> Package finger.x86_64 0:0.17-33 set to be updated ---> Package firstboot-tui.x86_64 0:1.4.27.9-1.el5.centos set to be updated ---> Package freetype.x86_64 0:2.2.1-28.el5_7.2 set to be updated ---> Package freetype-devel.x86_64 0:2.2.1-28.el5_7.2 set to be updated ---> Package ftp.x86_64 0:0.17-37.el5 set to be updated ---> Package gamin.x86_64 0:0.1.7-10.el5 set to be updated ---> Package gamin-python.x86_64 0:0.1.7-10.el5 set to be updated ---> Package gawk.x86_64 0:3.1.5-15.el5 set to be updated ---> Package gcc.x86_64 0:4.1.2-52.el5 set to be updated ---> Package gcc-c++.x86_64 0:4.1.2-52.el5 set to be updated ---> Package glibc.i686 0:2.5-81.el5_8.1 set to be updated ---> Package glibc.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package glibc-common.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package glibc-devel.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package glibc-headers.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package gnutls.x86_64 0:1.4.1-7.el5_8.2 set to be updated ---> Package groff.x86_64 0:1.18.1.1-13.el5 set to be updated ---> Package gtk2.x86_64 0:2.10.4-21.el5_7.7 set to be updated ---> Package gzip.x86_64 0:1.3.5-13.el5.centos set to be updated ---> Package hmaccalc.x86_64 0:0.9.6-4.el5 set to be updated ---> Package htop.x86_64 0:1.0.1-2.el5.rf set to be updated ---> Package hwdata.noarch 0:0.213.26-1.el5 set to be updated ---> Package ifd-egate.x86_64 0:0.05-17.el5 set to be updated ---> Package initscripts.x86_64 0:8.45.42-1.el5.centos set to be updated ---> Package iproute.x86_64 0:2.6.18-13.el5 set to be updated ---> Package iptables.x86_64 0:1.3.5-9.1.el5 set to be updated ---> Package iptables-ipv6.x86_64 0:1.3.5-9.1.el5 set to be updated ---> Package iscsi-initiator-utils.x86_64 0:6.2.0.872-13.el5 set to be updated ---> Package kernel.x86_64 0:2.6.18-308.1.1.el5 set to be installed ---> Package kernel-headers.x86_64 0:2.6.18-308.1.1.el5 set to be updated ---> Package kpartx.x86_64 0:0.4.7-48.el5_8.1 set to be updated ---> Package krb5-devel.x86_64 0:1.6.1-70.el5 set to be updated ---> Package krb5-libs.x86_64 0:1.6.1-70.el5 set to be updated ---> Package krb5-workstation.x86_64 0:1.6.1-70.el5 set to be updated ---> Package ksh.x86_64 0:20100621-5.el5_8.1 set to be updated ---> Package kudzu.x86_64 0:1.2.57.1.26-3.el5.centos set to be updated ---> Package less.x86_64 0:436-9.el5 set to be updated ---> Package lftp.x86_64 0:3.7.11-7.el5 set to be updated ---> Package libX11.x86_64 0:1.0.3-11.el5_7.1 set to be updated ---> Package libX11-devel.x86_64 0:1.0.3-11.el5_7.1 set to be updated ---> Package libXcursor.x86_64 0:1.1.7-1.2 set to be updated ---> Package libacl.x86_64 0:2.2.39-8.el5 set to be updated ---> Package libgcc.x86_64 0:4.1.2-52.el5 set to be updated ---> Package libgomp.x86_64 0:4.4.6-3.el5.1 set to be updated ---> Package libpng.x86_64 2:1.2.10-16.el5_8 set to be updated ---> Package libpng-devel.x86_64 2:1.2.10-16.el5_8 set to be updated ---> Package libsmbios.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package libstdc++.x86_64 0:4.1.2-52.el5 set to be updated ---> Package libstdc++-devel.x86_64 0:4.1.2-52.el5 set to be updated ---> Package libsysfs.x86_64 0:2.1.0-1.el5 set to be updated ---> Package libusb.x86_64 0:0.1.12-6.el5 set to be updated ---> Package libvolume_id.x86_64 0:095-14.27.el5_7.1 set to be updated ---> Package libxml2.x86_64 0:2.6.26-2.1.15.el5_8.2 set to be updated ---> Package libxml2-python.x86_64 0:2.6.26-2.1.15.el5_8.2 set to be updated ---> Package logrotate.x86_64 0:3.7.4-12 set to be updated ---> Package lsof.x86_64 0:4.78-6 set to be updated ---> Package lvm2.x86_64 0:2.02.88-7.el5 set to be updated ---> Package m2crypto.x86_64 0:0.16-8.el5 set to be updated ---> Package man.x86_64 0:1.6d-2.el5 set to be updated ---> Package man-pages.noarch 0:2.39-20.el5 set to be updated ---> Package mcelog.x86_64 1:0.9pre-1.32.el5 set to be updated ---> Package mesa-libGL.x86_64 0:6.5.1-7.10.el5 set to be updated ---> Package mesa-libGL-devel.x86_64 0:6.5.1-7.10.el5 set to be updated ---> Package microcode_ctl.x86_64 2:1.17-1.56.el5 set to be updated ---> Package mkinitrd.x86_64 0:5.1.19.6-75.el5 set to be updated ---> Package mktemp.x86_64 3:1.5-24.el5 set to be updated --> Processing Dependency: nash = 5.1.19.6-68.el5_6.1 for package: mkinitrd ---> Package nash.x86_64 0:5.1.19.6-75.el5 set to be updated ---> Package net-snmp.x86_64 1:5.3.2.2-17.el5 set to be updated ---> Package net-snmp-devel.x86_64 1:5.3.2.2-17.el5 set to be updated ---> Package net-snmp-libs.x86_64 1:5.3.2.2-17.el5 set to be updated ---> Package net-snmp-utils.x86_64 1:5.3.2.2-17.el5 set to be updated ---> Package net-tools.x86_64 0:1.60-82.el5 set to be updated ---> Package nfs-utils.x86_64 1:1.0.9-60.el5 set to be updated ---> Package nfs-utils-lib.x86_64 0:1.0.8-7.9.el5 set to be updated ---> Package nscd.x86_64 0:2.5-81.el5_8.1 set to be updated ---> Package nspr.x86_64 0:4.8.9-1.el5_8 set to be updated ---> Package nspr-devel.x86_64 0:4.8.9-1.el5_8 set to be updated ---> Package nss.x86_64 0:3.13.1-5.el5_8 set to be updated ---> Package nss-devel.x86_64 0:3.13.1-5.el5_8 set to be updated ---> Package nss-tools.x86_64 0:3.13.1-5.el5_8 set to be updated ---> Package nss_ldap.x86_64 0:253-49.el5 set to be updated ---> Package ntp.x86_64 0:4.2.2p1-15.el5.centos.1 set to be updated ---> Package numactl.x86_64 0:0.9.8-12.el5_6 set to be updated ---> Package oddjob.x86_64 0:0.27-12.el5 set to be updated ---> Package oddjob-libs.x86_64 0:0.27-12.el5 set to be updated ---> Package openldap.x86_64 0:2.3.43-25.el5 set to be updated ---> Package openssh.x86_64 0:4.3p2-82.el5 set to be updated ---> Package openssh-clients.x86_64 0:4.3p2-82.el5 set to be updated ---> Package openssh-server.x86_64 0:4.3p2-82.el5 set to be updated ---> Package openssl.i686 0:0.9.8e-22.el5_8.1 set to be updated ---> Package openssl.x86_64 0:0.9.8e-22.el5_8.1 set to be updated ---> Package openssl-devel.x86_64 0:0.9.8e-22.el5_8.1 set to be updated ---> Package pam_krb5.x86_64 0:2.2.14-22.el5 set to be updated ---> Package pam_pkcs11.x86_64 0:0.5.3-26.el5 set to be updated ---> Package pango.x86_64 0:1.14.9-8.el5.centos.3 set to be updated ---> Package parted.x86_64 0:1.8.1-29.el5 set to be updated ---> Package pciutils.x86_64 0:3.1.7-5.el5 set to be updated ---> Package perl.x86_64 4:5.8.8-38.el5 set to be updated ---> Package perl-Compress-Raw-Bzip2.x86_64 0:2.037-1.el5.rf set to be updated ---> Package perl-Compress-Raw-Zlib.x86_64 0:2.037-1.el5.rf set to be updated ---> Package perl-rrdtool.x86_64 0:1.4.7-1.el5.rf set to be updated ---> Package poppler.x86_64 0:0.5.4-19.el5 set to be updated ---> Package poppler-utils.x86_64 0:0.5.4-19.el5 set to be updated ---> Package popt.x86_64 0:1.10.2.3-28.el5_8 set to be updated ---> Package postgresql-libs.x86_64 0:8.1.23-1.el5_7.3 set to be updated ---> Package procps.x86_64 0:3.2.7-18.el5 set to be updated ---> Package proftpd.x86_64 0:1.3.4a-1.el5.rf set to be updated --> Processing Dependency: perl(Mail::Sendmail) for package: proftpd ---> Package python.x86_64 0:2.4.3-46.el5 set to be updated ---> Package python-ctypes.x86_64 0:1.0.2-3.el5 set to be updated ---> Package python-libs.x86_64 0:2.4.3-46.el5 set to be updated ---> Package python-smbios.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package rhpl.x86_64 0:0.194.1-2 set to be updated ---> Package rmt.x86_64 0:0.4b41-6.el5 set to be updated ---> Package rng-utils.x86_64 1:2.0-5.el5 set to be updated ---> Package rpm.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rpm-build.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rpm-devel.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rpm-libs.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rpm-python.x86_64 0:4.4.2.3-28.el5_8 set to be updated ---> Package rrdtool.x86_64 0:1.4.7-1.el5.rf set to be updated ---> Package rsh.x86_64 0:0.17-40.el5_7.1 set to be updated ---> Package rsync.x86_64 0:3.0.6-4.el5_7.1 set to be updated ---> Package ruby.x86_64 0:1.8.5-24.el5 set to be updated ---> Package ruby-libs.x86_64 0:1.8.5-24.el5 set to be updated ---> Package sblim-sfcb.x86_64 0:1.3.11-49.el5 set to be updated ---> Package sblim-sfcc.x86_64 0:2.2.2-49.el5 set to be updated ---> Package selinux-policy.noarch 0:2.4.6-327.el5 set to be updated ---> Package selinux-policy-targeted.noarch 0:2.4.6-327.el5 set to be updated ---> Package setup.noarch 0:2.5.58-9.el5 set to be updated ---> Package shadow-utils.x86_64 2:4.0.17-20.el5 set to be updated ---> Package smartmontools.x86_64 1:5.38-3.el5 set to be updated ---> Package smbios-utils-bin.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package smbios-utils-python.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package sos.noarch 0:1.7-9.62.el5 set to be updated ---> Package srvadmin-omilcore.x86_64 0:6.5.0-1.452.1.el5 set to be updated ---> Package strace.x86_64 0:4.5.18-11.el5_8 set to be updated ---> Package subversion.x86_64 0:1.6.11-7.el5_6.4 set to be updated ---> Package sudo.x86_64 0:1.7.2p1-13.el5 set to be updated ---> Package sysfsutils.x86_64 0:2.1.0-1.el5 set to be updated ---> Package syslinux.x86_64 0:3.11-7 set to be updated ---> Package system-config-network-tui.noarch 0:1.3.99.21-1.el5 set to be updated ---> Package talk.x86_64 0:0.17-31.el5 set to be updated ---> Package tar.x86_64 2:1.15.1-31.el5 set to be updated ---> Package traceroute.x86_64 3:2.0.1-6.el5 set to be updated ---> Package tzdata.x86_64 0:2012b-3.el5 set to be updated ---> Package udev.x86_64 0:095-14.27.el5_7.1 set to be updated ---> Package util-linux.x86_64 0:2.13-0.59.el5 set to be updated ---> Package vixie-cron.x86_64 4:4.1-81.el5 set to be updated ---> Package wget.x86_64 0:1.11.4-3.el5_8.1 set to be updated ---> Package xinetd.x86_64 2:2.3.14-16.el5 set to be updated ---> Package yp-tools.x86_64 0:2.9-2.el5 set to be updated ---> Package ypbind.x86_64 3:1.19-12.el5_6.1 set to be updated ---> Package yum.noarch 0:3.2.22-39.el5.centos set to be updated ---> Package yum-dellsysid.x86_64 0:2.2.27-3.2.el5 set to be updated ---> Package yum-fastestmirror.noarch 0:1.1.16-21.el5.centos set to be updated ---> Package zlib.x86_64 0:1.2.3-4.el5 set to be updated ---> Package zlib-devel.x86_64 0:1.2.3-4.el5 set to be updated --> Running transaction check --> Processing Dependency: dbus = 1.1.2-15.el5_6 for package: dbus-libs --> Processing Dependency: nash = 5.1.19.6-68.el5_6.1 for package: mkinitrd ---> Package perl-Mail-Sendmail.noarch 0:0.79-1.2.el5.rf set to be updated base/filelists | 3.5 MB 00:00 dell-omsa-indep/filelists | 195 kB 00:01 dell-omsa-specific/filelists | 1.0 kB 00:00 extras/filelists_db | 224 kB 00:00 rpmforge/filelists | 4.8 MB 00:06 updates/filelists_db | 715 kB 00:00 --> Finished Dependency Resolution dbus-libs-1.1.2-15.el5_6.i386 from installed has depsolving problems --> Missing Dependency: dbus = 1.1.2-15.el5_6 is needed by package dbus-libs-1.1.2-15.el5_6.i386 (installed) mkinitrd-5.1.19.6-68.el5_6.1.i386 from installed has depsolving problems --> Missing Dependency: nash = 5.1.19.6-68.el5_6.1 is needed by package mkinitrd-5.1.19.6-68.el5_6.1.i386 (installed) Error: Missing Dependency: nash = 5.1.19.6-68.el5_6.1 is needed by package mkinitrd-5.1.19.6-68.el5_6.1.i386 (installed) Error: Missing Dependency: dbus = 1.1.2-15.el5_6 is needed by package dbus-libs-1.1.2-15.el5_6.i386 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. I have tried running package-cleanup --dupes and package-cleanup --problems but to no avail.

    Read the article

  • Where can these be posted besides the Python Cookbook?

    - by Noctis Skytower
    Whitespace Assembler #! /usr/bin/env python """Assembler.py Compiles a program from "Assembly" folder into "Program" folder. Can be executed directly by double-click or on the command line. Give name of *.WSA file without extension (example: stack_calc).""" ################################################################################ __author__ = 'Stephen "Zero" Chappell <[email protected]>' __date__ = '14 March 2010' __version__ = '$Revision: 3 $' ################################################################################ import string from Interpreter import INS, MNEMONIC ################################################################################ def parse(code): program = [] process_virtual(program, code) process_control(program) return tuple(program) def process_virtual(program, code): for line, text in enumerate(code.split('\n')): if not text or text[0] == '#': continue if text.startswith('part '): parse_part(program, line, text[5:]) elif text.startswith(' '): parse_code(program, line, text[5:]) else: syntax_error(line) def syntax_error(line): raise SyntaxError('Line ' + str(line + 1)) ################################################################################ def process_control(program): parts = get_parts(program) names = dict(pair for pair in zip(parts, generate_index())) correct_control(program, names) def get_parts(program): parts = [] for ins in program: if isinstance(ins, tuple): ins, arg = ins if ins == INS.PART: if arg in parts: raise NameError('Part definition was found twice: ' + arg) parts.append(arg) return parts def generate_index(): index = 1 while True: yield index index *= -1 if index > 0: index += 1 def correct_control(program, names): for index, ins in enumerate(program): if isinstance(ins, tuple): ins, arg = ins if ins in HAS_LABEL: if arg not in names: raise NameError('Part definition was never found: ' + arg) program[index] = (ins, names[arg]) ################################################################################ def parse_part(program, line, text): if not valid_label(text): syntax_error(line) program.append((INS.PART, text)) def valid_label(text): if not between_quotes(text): return False label = text[1:-1] if not valid_name(label): return False return True def between_quotes(text): if len(text) < 3: return False if text.count('"') != 2: return False if text[0] != '"' or text[-1] != '"': return False return True def valid_name(label): valid_characters = string.ascii_letters + string.digits + '_' valid_set = frozenset(valid_characters) label_set = frozenset(label) if len(label_set - valid_set) != 0: return False return True ################################################################################ from Interpreter import HAS_LABEL, Program NO_ARGS = Program.NO_ARGS HAS_ARG = Program.HAS_ARG TWO_WAY = tuple(set(NO_ARGS) & set(HAS_ARG)) ################################################################################ def parse_code(program, line, text): for ins, word in enumerate(MNEMONIC): if text.startswith(word): check_code(program, line, text[len(word):], ins) break else: syntax_error(line) def check_code(program, line, text, ins): if ins in TWO_WAY: if text: number = parse_number(line, text) program.append((ins, number)) else: program.append(ins) elif ins in HAS_LABEL: text = parse_label(line, text) program.append((ins, text)) elif ins in HAS_ARG: number = parse_number(line, text) program.append((ins, number)) elif ins in NO_ARGS: if text: syntax_error(line) program.append(ins) else: syntax_error(line) def parse_label(line, text): if not text or text[0] != ' ': syntax_error(line) text = text[1:] if not valid_label(text): syntax_error(line) return text ################################################################################ def parse_number(line, text): if not valid_number(text): syntax_error(line) return int(text) def valid_number(text): if len(text) < 2: return False if text[0] != ' ': return False text = text[1:] if '+' in text and '-' in text: return False if '+' in text: if text.count('+') != 1: return False if text[0] != '+': return False text = text[1:] if not text: return False if '-' in text: if text.count('-') != 1: return False if text[0] != '-': return False text = text[1:] if not text: return False valid_set = frozenset(string.digits) value_set = frozenset(text) if len(value_set - valid_set) != 0: return False return True ################################################################################ ################################################################################ from Interpreter import partition_number VMC_2_TRI = { (INS.PUSH, True): (0, 0), (INS.COPY, False): (0, 2, 0), (INS.COPY, True): (0, 1, 0), (INS.SWAP, False): (0, 2, 1), (INS.AWAY, False): (0, 2, 2), (INS.AWAY, True): (0, 1, 2), (INS.ADD, False): (1, 0, 0, 0), (INS.SUB, False): (1, 0, 0, 1), (INS.MUL, False): (1, 0, 0, 2), (INS.DIV, False): (1, 0, 1, 0), (INS.MOD, False): (1, 0, 1, 1), (INS.SET, False): (1, 1, 0), (INS.GET, False): (1, 1, 1), (INS.PART, True): (2, 0, 0), (INS.CALL, True): (2, 0, 1), (INS.GOTO, True): (2, 0, 2), (INS.ZERO, True): (2, 1, 0), (INS.LESS, True): (2, 1, 1), (INS.BACK, False): (2, 1, 2), (INS.EXIT, False): (2, 2, 2), (INS.OCHR, False): (1, 2, 0, 0), (INS.OINT, False): (1, 2, 0, 1), (INS.ICHR, False): (1, 2, 1, 0), (INS.IINT, False): (1, 2, 1, 1) } ################################################################################ def to_trinary(program): trinary_code = [] for ins in program: if isinstance(ins, tuple): ins, arg = ins trinary_code.extend(VMC_2_TRI[(ins, True)]) trinary_code.extend(from_number(arg)) else: trinary_code.extend(VMC_2_TRI[(ins, False)]) return tuple(trinary_code) def from_number(arg): code = [int(arg < 0)] if arg: for bit in reversed(list(partition_number(abs(arg), 2))): code.append(bit) return code + [2] return code + [0, 2] to_ws = lambda trinary: ''.join(' \t\n'[index] for index in trinary) def compile_wsa(source): program = parse(source) trinary = to_trinary(program) ws_code = to_ws(trinary) return ws_code ################################################################################ ################################################################################ import os import sys import time import traceback def main(): name, source, command_line, error = get_source() if not error: start = time.clock() try: ws_code = compile_wsa(source) except: print('ERROR: File could not be compiled.\n') traceback.print_exc() error = True else: path = os.path.join('Programs', name + '.ws') try: open(path, 'w').write(ws_code) except IOError as err: print(err) error = True else: div, mod = divmod((time.clock() - start) * 1000, 1) args = int(div), '{:.3}'.format(mod)[1:] print('DONE: Comipled in {}{} ms'.format(*args)) handle_close(error, command_line) def get_source(): if len(sys.argv) > 1: command_line = True name = sys.argv[1] else: command_line = False try: name = input('Source File: ') except: return None, None, False, True print() path = os.path.join('Assembly', name + '.wsa') try: return name, open(path).read(), command_line, False except IOError as err: print(err) return None, None, command_line, True def handle_close(error, command_line): if error: usage = 'Usage: {} <assembly>'.format(os.path.basename(sys.argv[0])) print('\n{}\n{}'.format('-' * len(usage), usage)) if not command_line: time.sleep(10) ################################################################################ if __name__ == '__main__': main() Whitespace Helpers #! /usr/bin/env python """Helpers.py Includes a function to encode Python strings into my WSA format. Has a "PRINT_LINE" function that can be copied to a WSA program. Contains a "PRINT" function and documentation as an explanation.""" ################################################################################ __author__ = 'Stephen "Zero" Chappell <[email protected]>' __date__ = '14 March 2010' __version__ = '$Revision: 1 $' ################################################################################ def encode_string(string, addr): print(' push', addr) print(' push', len(string)) print(' set') addr += 1 for offset, character in enumerate(string): print(' push', addr + offset) print(' push', ord(character)) print(' set') ################################################################################ # Prints a string with newline. # push addr # call "PRINT_LINE" """ part "PRINT_LINE" call "PRINT" push 10 ochr back """ ################################################################################ # def print(array): # if len(array) <= 0: # return # offset = 1 # while len(array) - offset >= 0: # ptr = array.ptr + offset # putch(array[ptr]) # offset += 1 """ part "PRINT" # Line 1-2 copy get less "__PRINT_RET_1" copy get zero "__PRINT_RET_1" # Line 3 push 1 # Line 4 part "__PRINT_LOOP" copy copy 2 get swap sub less "__PRINT_RET_2" # Line 5 copy 1 copy 1 add # Line 6 get ochr # Line 7 push 1 add goto "__PRINT_LOOP" part "__PRINT_RET_2" away part "__PRINT_RET_1" away back """ Whitespace Interpreter #! /usr/bin/env python """Interpreter.py Runs programs in "Programs" and creates *.WSO files when needed. Can be executed directly by double-click or on the command line. If run on command line, add "ASM" flag to dump program assembly.""" ################################################################################ __author__ = 'Stephen "Zero" Chappell <[email protected]>' __date__ = '14 March 2010' __version__ = '$Revision: 4 $' ################################################################################ def test_file(path): disassemble(parse(trinary(load(path))), True) ################################################################################ load = lambda ws: ''.join(c for r in open(ws) for c in r if c in ' \t\n') trinary = lambda ws: tuple(' \t\n'.index(c) for c in ws) ################################################################################ def enum(names): names = names.replace(',', ' ').split() space = dict((reversed(pair) for pair in enumerate(names)), __slots__=()) return type('enum', (object,), space)() INS = enum('''\ PUSH, COPY, SWAP, AWAY, \ ADD, SUB, MUL, DIV, MOD, \ SET, GET, \ PART, CALL, GOTO, ZERO, LESS, BACK, EXIT, \ OCHR, OINT, ICHR, IINT''') ################################################################################ def parse(code): ins = iter(code).__next__ program = [] while True: try: imp = ins() except StopIteration: return tuple(program) if imp == 0: # [Space] parse_stack(ins, program) elif imp == 1: # [Tab] imp = ins() if imp == 0: # [Tab][Space] parse_math(ins, program) elif imp == 1: # [Tab][Tab] parse_heap(ins, program) else: # [Tab][Line] parse_io(ins, program) else: # [Line] parse_flow(ins, program) def parse_number(ins): sign = ins() if sign == 2: raise StopIteration() buffer = '' code = ins() if code == 2: raise StopIteration() while code != 2: buffer += str(code) code = ins() if sign == 1: return int(buffer, 2) * -1 return int(buffer, 2) ################################################################################ def parse_stack(ins, program): code = ins() if code == 0: # [Space] number = parse_number(ins) program.append((INS.PUSH, number)) elif code == 1: # [Tab] code = ins() number = parse_number(ins) if code == 0: # [Tab][Space] program.append((INS.COPY, number)) elif code == 1: # [Tab][Tab] raise StopIteration() else: # [Tab][Line] program.append((INS.AWAY, number)) else: # [Line] code = ins() if code == 0: # [Line][Space] program.append(INS.COPY) elif code == 1: # [Line][Tab] program.append(INS.SWAP) else: # [Line][Line] program.append(INS.AWAY) def parse_math(ins, program): code = ins() if code == 0: # [Space] code = ins() if code == 0: # [Space][Space] program.append(INS.ADD) elif code == 1: # [Space][Tab] program.append(INS.SUB) else: # [Space][Line] program.append(INS.MUL) elif code == 1: # [Tab] code = ins() if code == 0: # [Tab][Space] program.append(INS.DIV) elif code == 1: # [Tab][Tab] program.append(INS.MOD) else: # [Tab][Line] raise StopIteration() else: # [Line] raise StopIteration() def parse_heap(ins, program): code = ins() if code == 0: # [Space] program.append(INS.SET) elif code == 1: # [Tab] program.append(INS.GET) else: # [Line] raise StopIteration() def parse_io(ins, program): code = ins() if code == 0: # [Space] code = ins() if code == 0: # [Space][Space] program.append(INS.OCHR) elif code == 1: # [Space][Tab] program.append(INS.OINT) else: # [Space][Line] raise StopIteration() elif code == 1: # [Tab] code = ins() if code == 0: # [Tab][Space] program.append(INS.ICHR) elif code == 1: # [Tab][Tab] program.append(INS.IINT) else: # [Tab][Line] raise StopIteration() else: # [Line] raise StopIteration() def parse_flow(ins, program): code = ins() if code == 0: # [Space] code = ins() label = parse_number(ins) if code == 0: # [Space][Space] program.append((INS.PART, label)) elif code == 1: # [Space][Tab] program.append((INS.CALL, label)) else: # [Space][Line] program.append((INS.GOTO, label)) elif code == 1: # [Tab] code = ins() if code == 0: # [Tab][Space] label = parse_number(ins) program.append((INS.ZERO, label)) elif code == 1: # [Tab][Tab] label = parse_number(ins) program.append((INS.LESS, label)) else: # [Tab][Line] program.append(INS.BACK) else: # [Line] code = ins() if code == 2: # [Line][Line] program.append(INS.EXIT) else: # [Line][Space] or [Line][Tab] raise StopIteration() ################################################################################ MNEMONIC = '\ push copy swap away add sub mul div mod set get part \ call goto zero less back exit ochr oint ichr iint'.split() HAS_ARG = [getattr(INS, name) for name in 'PUSH COPY AWAY PART CALL GOTO ZERO LESS'.split()] HAS_LABEL = [getattr(INS, name) for name in 'PART CALL GOTO ZERO LESS'.split()] def disassemble(program, names=False): if names: names = create_names(program) for ins in program: if isinstance(ins, tuple): ins, arg = ins assert ins in HAS_ARG has_arg = True else: assert INS.PUSH <= ins <= INS.IINT has_arg = False if ins == INS.PART: if names: print(MNEMONIC[ins], '"' + names[arg] + '"') else: print(MNEMONIC[ins], arg) elif has_arg and ins in HAS_ARG: if ins in HAS_LABEL and names: assert arg in names print(' ' + MNEMONIC[ins], '"' + names[arg] + '"') else: print(' ' + MNEMONIC[ins], arg) else: print(' ' + MNEMONIC[ins]) ################################################################################ def create_names(program): names = {} number = 1 for ins in program: if isinstance(ins, tuple) and ins[0] == INS.PART: label = ins[1] assert label not in names names[label] = number_to_name(number) number += 1 return names def number_to_name(number): name = '' for offset in reversed(list(partition_number(number, 27))): if offset: name += chr(ord('A') + offset - 1) else: name += '_' return name def partition_number(number, base): div, mod = divmod(number, base) yield mod while div: div, mod = divmod(div, base) yield mod ################################################################################ CODE = (' \t\n', ' \n ', ' \t \t\n', ' \n\t', ' \n\n', ' \t\n \t\n', '\t ', '\t \t', '\t \n', '\t \t ', '\t \t\t', '\t\t ', '\t\t\t', '\n \t\n', '\n \t \t\n', '\n \n \t\n', '\n\t \t\n', '\n\t\t \t\n', '\n\t\n', '\n\n\n', '\t\n ', '\t\n \t', '\t\n\t ', '\t\n\t\t') EXAMPLE = ''.join(CODE) ################################################################################ NOTES = '''\ STACK ===== push number copy copy number swap away away number MATH ==== add sub mul div mod HEAP ==== set get FLOW ==== part label call label goto label zero label less label back exit I/O === ochr oint ichr iint''' ################################################################################ ################################################################################ class Stack: def __init__(self): self.__data = [] # Stack Operators def push(self, number): self.__data.append(number) def copy(self, number=None): if number is None: self.__data.append(self.__data[-1]) else: size = len(self.__data) index = size - number - 1 assert 0 <= index < size self.__data.append(self.__data[index]) def swap(self): self.__data[-2], self.__data[-1] = self.__data[-1], self.__data[-2] def away(self, number=None): if number is None: self.__data.pop() else: size = len(self.__data) index = size - number - 1 assert 0 <= index < size del self.__data[index:-1] # Math Operators def add(self): suffix = self.__data.pop() prefix = self.__data.pop() self.__data.append(prefix + suffix) def sub(self): suffix = self.__data.pop() prefix = self.__data.pop() self.__data.append(prefix - suffix) def mul(self): suffix = self.__data.pop() prefix = self.__data.pop() self.__data.append(prefix * suffix) def div(self): suffix = self.__data.pop() prefix = self.__data.pop() self.__data.append(prefix // suffix) def mod(self): suffix = self.__data.pop() prefix = self.__data.pop() self.__data.append(prefix % suffix) # Program Operator def pop(self): return self.__data.pop() ################################################################################ class Heap: def __init__(self): self.__data = {} def set_(self, addr, item): if item: self.__data[addr] = item elif addr in self.__data: del self.__data[addr] def get_(self, addr): return self.__data.get(addr, 0) ################################################################################ import os import zlib import msvcrt import pickle import string class CleanExit(Exception): pass NOP = lambda arg: None DEBUG_WHITESPACE = False ################################################################################ class Program: NO_ARGS = INS.COPY, INS.SWAP, INS.AWAY, INS.ADD, \ INS.SUB, INS.MUL, INS.DIV, INS.MOD, \ INS.SET, INS.GET, INS.BACK, INS.EXIT, \ INS.OCHR, INS.OINT, INS.ICHR, INS.IINT HAS_ARG = INS.PUSH, INS.COPY, INS.AWAY, INS.PART, \ INS.CALL, INS.GOTO, INS.ZERO, INS.LESS def __init__(self, code): self.__data = code self.__validate() self.__build_jump() self.__check_jump() self.__setup_exec() def __setup_exec(self): self.__iptr = 0 self.__stck = stack = Stack() self.__heap = Heap() self.__cast = [] self.__meth = (stack.push, stack.copy, stack.swap, stack.away, stack.add, stack.sub, stack.mul, stack.div, stack.mod, self.__set, self.__get, NOP, self.__call, self.__goto, self.__zero, self.__less, self.__back, self.__exit, self.__ochr, self.__oint, self.__ichr, self.__iint) def step(self): ins = self.__data[self.__iptr] self.__iptr += 1 if isinstance(ins, tuple): self.__meth[ins[0]](ins[1]) else: self.__meth[ins]() def run(self): while True: ins = self.__data[self.__iptr] self.__iptr += 1 if isinstance(ins, tuple): self.__meth[ins[0]](ins[1]) else: self.__meth[ins]() def __oint(self): for digit in str(self.__stck.pop()): msvcrt.putwch(digit) def __ichr(self): addr = self.__stck.pop() # Input Routine while msvcrt.kbhit(): msvcrt.getwch() while True: char = msvcrt.getwch() if char in '\x00\xE0': msvcrt.getwch() elif char in string.printable: char = char.replace('\r', '\n') msvcrt.putwch(char) break item = ord(char) # Storing Number self.__heap.set_(addr, item) def __iint(self): addr = self.__stck.pop() # Input Routine while msvcrt.kbhit(): msvcrt.getwch() buff = '' char = msvcrt.getwch() while char != '\r' or not buff: if char in '\x00\xE0': msvcrt.getwch() elif char in '+-' and not buff: msvcrt.putwch(char) buff += char elif '0' <= char <= '9': msvcrt.putwch(char) buff += char elif char == '\b': if buff: buff = buff[:-1] msvcrt.putwch(char) msvcrt.putwch(' ') msvcrt.putwch(char) char = msvcrt.getwch() msvcrt.putwch(char) msvcrt.putwch('\n') item = int(buff) # Storing Number self.__heap.set_(addr, item) def __goto(self, label): self.__iptr = self.__jump[label] def __zero(self, label): if self.__stck.pop() == 0: self.__iptr = self.__jump[label] def __less(self, label): if self.__stck.pop() < 0: self.__iptr = self.__jump[label] def __exit(self): self.__setup_exec() raise CleanExit() def __set(self): item = self.__stck.pop() addr = self.__stck.po

    Read the article

  • client problems - misaligned expectations & not following SDLC protocols

    - by louism
    hi guys, im having some serious problems with a client on a project - i could use some advice please the short version i have been working with this client now for almost 6 months without any problems (a classified website project in the range of 500 hours) over the last few days things have drastically deteriorated to the point where ive had to place the project on-hold whilst i work-out what to do (this has pissed the client off even more) to be simplistic, the root cause of the issue is this: the client doesnt read the specs i make for him, i code the feature, he than wants to change things, i tell him its not to the agreed spec and that that change will have to be postponed and possibly charged for, he gets upset and rants saying 'hes paid for the feature' and im not keeping to the agreement (<- misalignment of expectations) i think the root cause of the root cause is my clients failure to take my SDLC protocols seriously. i have a bug tracking system in place which he practically refuses to use (he still emails me bugs), he doesnt seem to care to much for the protocols i use for dealing with scope creep and change control the whole situation came to a head recently where he 'cracked it' (an aussie term for being fed-up). the more terms like 'postponed for post-launch implementation', 'costed feature addition', and 'not to agreed spec' i kept using, the worse it got finally, he began to bully me - basically insisting i shut-up and do the work im being paid for. i wrote a long-winded email explaining how wrong he was on all these different points, and explaining what all the SDLC protocols do to protect the success of the project. than i deleted that email and wrote a new one in the new email, i suggested as a solution i write up a list of grievances we both had. we than review the list and compromise on different points: he gets some things he wants, i get some things i want. sometimes youve got to give ground to get ground his response to this suggestion was flat-out refusal, and a restatement that i should just get on with the work ive been paid to do so there you have the very subjective short version. if you have the time and inclination, the long version may be a little less bias as it has the email communiques between me and my client the long version (with background) the long version works by me showing you the email communiques which lead to the situation coming to a head. so here it is, judge for yourself where the trouble started... 1. client asked me why something was missing from a feature i just uploaded, my response was to show him what was in the spec: it basically said the item he was looking for was never going to be included 2. [clients response...] Memo Louis, We are following your own title fields and keeping a consistent layout. Why the big fuss about not adding "Part". It simply replaces "model" and is consistent with your current title fields. 3. [my response...] hi [client], the 'part' field appeared to me as a redundancy / mistake. i requested clarification but never received any in a timely manner (about 2 weeks ago) the specification for this feature also indicated it wasnt going to be included: RE: "Why the big fuss about not adding "Part" " it may not appear so, but it would actually be a lot of work for me to now add a 'Part' field it could take me up to 15-20 minutes to properly explain why its such a big undertaking to do this, but i would prefer to use that time instead to work on completing your v1.1 features as a simplistic explanation - it connects to the change in paradigm from a 'generic classified ad' model to a 'specific attributes for specific categories' model basically, i am saying it is a big fuss, but i understand that it doesnt look that way - after all, it is just one ity-bitty field :) if you require a fuller explanation, please let me know and i will commit the time needed to write that out also, if you recall when we first started on the project, i said that with the effort/time required for features, you would likely not know off the top of your head. you may think something is really complex, but in reality its quite simple, you might think something is easy - but it could actually be a massive trauma to code (which is the case here with the 'Part' field). if you also recalled, i said the best course of action is to just ask, and i would let you know on a case-by-case basis 4. [email from me to client...] hi [client], the online catalogue page is now up live (see my email from a few days ago for information on how it works) note: the window of opportunity for input/revisions on what data the catalogue stores has now closed (as i have put the code up live now) RE: the UI/layout of the online catalogue page you may still do visual/ui tweaks to the page at the moment (this window for input/revisions will close in a couple of days time) 5. [email from client to me...] *(note: i had put up the feature & asked the client to review it, never heard back from them for a few days)* Memo Louis, Here you go again. CLOSED without a word of input from the customer. I don't think so. I will reply tomorrow regarding the content and functionality we require from this feature. 5. [from me to client...] hi [client]: RE: from my understanding, you are saying that the mini-sale yard control would change itself based on the fact someone was viewing for parts & accessories <- is that correct? this change is outside the scope of the v1.1 mini-spec and therefore will need to wait 'til post launch for costing/implementation 6. [email from client to me...] Memo Louis, Following your v1.1 mini-spec and all your time paid in full for the work selected. We need to make the situation clear. There will be no further items held for post-launch. Do not expect us to pay for any further items other than those we have agreed upon. You have undertaken to complete the Parts and accessories feature as follows. Obviously, as part of this process the "mini search" will be effected, and will require "adaption to make sense". 7. [email from me to client...] hi [client], RE: "There will be no further items held for post-launch. Do not expect us to pay for any further items other than those we have agreed upon." a few points to consider: 1) the specification for the 'parts & accessories' feature was as follows: (i.e. [what] "...we have agreed upon.") 2) you have received the 'parts & accessories' feature free of charge (you have paid $0 for it). ive spent two days coding that feature as a gesture of good will i would request that you please consider these two facts carefully and sincerely 8. [email from client to me...] Memo Louis, I don't see how you are giving us anything for free. From your original fee proposal you have deleted more than 30 hours of included features. Your title "shelved features". Further you have charged us twice by adding back into the site, at an addition cost, some of those "shelved features" features. See v1.1 mini-spec. Did include in your original fee proposal a change request budget but then charge without discussion items included in v1.1 mini-spec. Included a further Features test plan for a regression test, a fee of 10 hours that would not have been required if the "shelved features" were not left out of the agreed fee proposal. I have made every attempt to satisfy your your uneven business sense by offering you everything your heart desired, in the v1.1 mini-spec, to be left once again with your attitude of "its too hard, lets leave it for post launch". I am no longer accepting anything less than what we have contracted you to do. That is clearly defined in v1.1 mini-spec, and you are paid in advance for delivering those items as an acceptable function. a few notes about the above email... i had to cull features from the original spec because it didnt fit into the budget. i explained this to the client at the start of the project (he wanted more features than he had budget hours to do them all) nothing has been charged for twice, i didnt charge the client for culled features. im charging him to now do those culled features the draft version of the project schedule included a change request budget of 10 hours, but i had to remove that to meet the budget (the client may not have been aware of this to be fair to them) what the client refers to as my attitude of 'too hard/leave it for post-launch', i called a change request protocol and a method for keeping scope creep under control 9. [email from me to client...] hi [client], RE: "...all your grievances..." i had originally written out a long email response; it was fantastic, it had all these great points of how 'you were wrong' and 'i was right', you would of loved it (and by 'loved it', i mean it would of just infuriated you more) so, i decided to deleted it start over, for two reasons: 1) a long email is being disrespectful of your time (youre a busy businessman with things to do) 2) whos wrong or right gets us no closer to fixing the problems we are experiencing what i propose is this... i prepare a bullet point list of your grievances and my grievances (yes, im unhappy too about how things are going - and it has little to do with money) i submit this list to you for you to add to as necessary we then both take a good hard look at this list, and we decide which areas we are willing to give ground on as an example, the list may look something like this: "louis, you keep taking away features you said you would do" [your grievance 2] [your grievance 3] [your grievance ...] "[client], i feel you dont properly read the specs i prepare for you..." [my grievance 2] [my grievance 3] [my grievance ...] if you are willing to give this a try, let me know will it work? who knows. but if it doesnt, we can always go back to arguing some more :) obviously, this will only work if you are willing to give it a genuine try, and you can accept that you may have to 'give some ground to get some ground' what do you think? 10. [email from client to me ...] Memo Louis, Instead of wasting your time listing grievances, I would prefer you complete the items in v1.1 mini-spec, to a satisfactory conclusion. We almost had the website ready for launch until you brought the v1.1 mini-spec into the frame. Obviously I expected you could complete the v1.1 mini-spec in a two-week time frame as you indicated and give the site a more profession presentation. Most of the problems have been caused by you not following our instructions, but deciding to do what you feel like at the time. And then arguing with us how the missing information is not necessary. For instance "Parts and Accessories". Why on earth would you leave out the parts heading, when it ties-in with the fields you have already developed. It replaces "model" and is just as important in the context of information that appears in the "Details" panel. We are at a stage where the the v1.1 mini-spec needs to be completed without further time wasting and the site is complete (subject to all features working). We are on standby at this end to do just that. Let me know when you are back, working on the site and we will process and complete each v1.1 mini-spec, item by item, until the job is complete. 11. [last email from me to client...] hi [client], based on this reply, and your demonstrated unwillingness to compromise/give any ground on issues at hand, i have decided to place your project on-hold for the moment i will be considering further options on how to over-come our challenges over the next few days i will contact you by monday 17/may to discuss any new options i have come up with, and if i believe it is appropriate to restart work on your project at that point or not told you it was long... what do you think?

    Read the article

  • file doesn't open, running outside of debugger results in seg fault (c++)

    - by misterich
    Hello (and thanks in advance) I'm in a bit of a quandry, I cant seem to figure out why I'm seg faulting. A couple of notes: It's for a course -- and sadly I am required to use use C-strings instead of std::string. Please dont fix my code (I wont learn that way and I will keep bugging you). please just point out the flaws in my logic and suggest a different function/way. platform: gcc version 4.4.1 on Suse Linux 11.2 (2.6.31 kernel) Here's the code main.cpp: // /////////////////////////////////////////////////////////////////////////////////// // INCLUDES (C/C++ Std Library) #include <cstdlib> /// EXIT_SUCCESS, EXIT_FAILURE #include <iostream> /// cin, cout, ifstream #include <cassert> /// assert // /////////////////////////////////////////////////////////////////////////////////// // DEPENDENCIES (custom header files) #include "dict.h" /// Header for the dictionary class // /////////////////////////////////////////////////////////////////////////////////// // PRE-PROCESSOR CONSTANTS #define ENTER '\n' /// Used to accept new lines, quit program. #define SPACE ' ' /// One way to end the program // /////////////////////////////////////////////////////////////////////////////////// // CUSTOM DATA TYPES /// File Namespace -- keep it local namespace { /// Possible program prompts to display for the user. enum FNS_Prompts { fileName_, /// prints out the name of the file noFile_, /// no file was passed to the program tooMany_, /// more than one file was passed to the program noMemory_, /// Not enough memory to use the program usage_, /// how to use the program word_, /// ask the user to define a word. notFound_, /// the word is not in the dictionary done_, /// the program is closing normally }; } // /////////////////////////////////////////////////////////////////////////////////// // Namespace using namespace std; /// Nothing special in the way of namespaces // /////////////////////////////////////////////////////////////////////////////////// // FUNCTIONS /** prompt() prompts the user to do something, uses enum Prompts for parameter. */ void prompt(FNS_Prompts msg /** determines the prompt to use*/) { switch(msg) { case fileName_ : { cout << ENTER << ENTER << "The file name is: "; break; } case noFile_ : { cout << ENTER << ENTER << "...Sorry, a dictionary file is needed. Try again." << endl; break; } case tooMany_ : { cout << ENTER << ENTER << "...Sorry, you can only specify one dictionary file. Try again." << endl; break; } case noMemory_ : { cout << ENTER << ENTER << "...Sorry, there isn't enough memory available to run this program." << endl; break; } case usage_ : { cout << "USAGE:" << endl << " lookup.exe [dictionary file name]" << endl << endl; break; } case done_ : { cout << ENTER << ENTER << "like Master P says, \"Word.\"" << ENTER << endl; break; } case word_ : { cout << ENTER << ENTER << "Enter a word in the dictionary to get it's definition." << ENTER << "Enter \"?\" to get a sorted list of all words in the dictionary." << ENTER << "... Press the Enter key to quit the program: "; break; } case notFound_ : { cout << ENTER << ENTER << "...Sorry, that word is not in the dictionary." << endl; break; } default : { cout << ENTER << ENTER << "something passed an invalid enum to prompt(). " << endl; assert(false); /// something passed in an invalid enum } } } /** useDictionary() uses the dictionary created by createDictionary * - prompts user to lookup a word * - ends when the user enters an empty word */ void useDictionary(Dictionary &d) { char *userEntry = new char; /// user's input on the command line if( !userEntry ) // check the pointer to the heap { cout << ENTER << MEM_ERR_MSG << endl; exit(EXIT_FAILURE); } do { prompt(word_); // test code cout << endl << "----------------------------------------" << endl << "Enter something: "; cin.getline(userEntry, INPUT_LINE_MAX_LEN, ENTER); cout << ENTER << userEntry << endl; }while ( userEntry[0] != NIL && userEntry[0] != SPACE ); // GARBAGE COLLECTION delete[] userEntry; } /** Program Entry * Reads in the required, single file from the command prompt. * - If there is no file, state such and error out. * - If there is more than one file, state such and error out. * - If there is a single file: * - Create the database object * - Populate the database object * - Prompt the user for entry * main() will return EXIT_SUCCESS upon termination. */ int main(int argc, /// the number of files being passed into the program char *argv[] /// pointer to the filename being passed into tthe program ) { // EXECUTE /* Testing code * / char tempFile[INPUT_LINE_MAX_LEN] = {NIL}; cout << "enter filename: "; cin.getline(tempFile, INPUT_LINE_MAX_LEN, '\n'); */ // uncomment after successful debugging if(argc <= 1) { prompt(noFile_); prompt(usage_); return EXIT_FAILURE; /// no file was passed to the program } else if(argc > 2) { prompt(tooMany_); prompt(usage_); return EXIT_FAILURE; /// more than one file was passed to the program } else { prompt(fileName_); cout << argv[1]; // print out name of dictionary file if( !argv[1] ) { prompt(noFile_); prompt(usage_); return EXIT_FAILURE; /// file does not exist } /* file.open( argv[1] ); // open file numEntries >> in.getline(file); // determine number of dictionary objects to create file.close(); // close file Dictionary[ numEntries ](argv[1]); // create the dictionary object */ // TEMPORARY FILE FOR TESTING!!!! //Dictionary scrabble(tempFile); Dictionary scrabble(argv[1]); // creaate the dicitonary object //*/ useDictionary(scrabble); // prompt the user, use the dictionary } // exit return EXIT_SUCCESS; /// terminate program. } Dict.h/.cpp #ifndef DICT_H #define DICT_H // /////////////////////////////////////////////////////////////////////////////////// // DEPENDENCIES (Custom header files) #include "entry.h" /// class for dictionary entries // /////////////////////////////////////////////////////////////////////////////////// // PRE-PROCESSOR MACROS #define INPUT_LINE_MAX_LEN 256 /// Maximum length of each line in the dictionary file class Dictionary { public : // // Do NOT modify the public section of this class // typedef void (*WordDefFunc)(const char *word, const char *definition); Dictionary( const char *filename ); ~Dictionary(); const char *lookupDefinition( const char *word ); void forEach( WordDefFunc func ); private : // // You get to provide the private members // // VARIABLES int m_numEntries; /// stores the number of entries in the dictionary Entry *m_DictEntry_ptr; /// points to an array of class Entry // Private Functions }; #endif ----------------------------------- // /////////////////////////////////////////////////////////////////////////////////// // INCLUDES (C/C++ Std Library) #include <iostream> /// cout, getline #include <fstream> // ifstream #include <cstring> /// strchr // /////////////////////////////////////////////////////////////////////////////////// // DEPENDENCIES (custom header files) #include "dict.h" /// Header file required by assignment //#include "entry.h" /// Dicitonary Entry Class // /////////////////////////////////////////////////////////////////////////////////// // PRE-PROCESSOR MACROS #define COMMA ',' /// Delimiter for file #define ENTER '\n' /// Carriage return character #define FILE_ERR_MSG "The data file could not be opened. Program will now terminate." #pragma warning(disable : 4996) /// turn off MS compiler warning about strcpy() // /////////////////////////////////////////////////////////////////////////////////// // Namespace reference using namespace std; // /////////////////////////////////////////////////////////////////////////////////// // PRIVATE MEMBER FUNCTIONS /** * Sorts the dictionary entries. */ /* static void sortDictionary(?) { // sort through the words using qsort } */ /** NO LONGER NEEDED?? * parses out the length of the first cell in a delimited cell * / int getWordLength(char *str /// string of data to parse ) { return strcspn(str, COMMA); } */ // /////////////////////////////////////////////////////////////////////////////////// // PUBLIC MEMBER FUNCTIONS /** constructor for the class * - opens/reads in file * - creates initializes the array of member vars * - creates pointers to entry objects * - stores pointers to entry objects in member var * - ? sort now or later? */ Dictionary::Dictionary( const char *filename ) { // Create a filestream, open the file to be read in ifstream dataFile(filename, ios::in ); /* if( dataFile.fail() ) { cout << FILE_ERR_MSG << endl; exit(EXIT_FAILURE); } */ if( dataFile.is_open() ) { // read first line of data // TEST CODE in.getline(dataFile, INPUT_LINE_MAX_LEN) >> m_numEntries; // TEST CODE char temp[INPUT_LINE_MAX_LEN] = {NIL}; // TEST CODE dataFile.getline(temp,INPUT_LINE_MAX_LEN,'\n'); dataFile >> m_numEntries; /** Number of terms in the dictionary file * \todo find out how many lines in the file, subtract one, ingore first line */ //create the array of entries m_DictEntry_ptr = new Entry[m_numEntries]; // check for valid memory allocation if( !m_DictEntry_ptr ) { cout << MEM_ERR_MSG << endl; exit(EXIT_FAILURE); } // loop thru each line of the file, parsing words/def's and populating entry objects for(int EntryIdx = 0; EntryIdx < m_numEntries; ++EntryIdx) { // VARIABLES char *tempW_ptr; /// points to a temporary word char *tempD_ptr; /// points to a temporary def char *w_ptr; /// points to the word in the Entry object char *d_ptr; /// points to the definition in the Entry int tempWLen; /// length of the temp word string int tempDLen; /// length of the temp def string char tempLine[INPUT_LINE_MAX_LEN] = {NIL}; /// stores a single line from the file // EXECUTE // getline(dataFile, tempLine) // get a "word,def" line from the file dataFile.getline(tempLine, INPUT_LINE_MAX_LEN); // get a "word,def" line from the file // Parse the string tempW_ptr = tempLine; // point the temp word pointer at the first char in the line tempD_ptr = strchr(tempLine, COMMA); // point the def pointer at the comma *tempD_ptr = NIL; // replace the comma with a NIL ++tempD_ptr; // increment the temp def pointer // find the string lengths... +1 to account for terminator tempWLen = strlen(tempW_ptr) + 1; tempDLen = strlen(tempD_ptr) + 1; // Allocate heap memory for the term and defnition w_ptr = new char[ tempWLen ]; d_ptr = new char[ tempDLen ]; // check memory allocation if( !w_ptr && !d_ptr ) { cout << MEM_ERR_MSG << endl; exit(EXIT_FAILURE); } // copy the temp word, def into the newly allocated memory and terminate the strings strcpy(w_ptr,tempW_ptr); w_ptr[tempWLen] = NIL; strcpy(d_ptr,tempD_ptr); d_ptr[tempDLen] = NIL; // set the pointers for the entry objects m_DictEntry_ptr[ EntryIdx ].setWordPtr(w_ptr); m_DictEntry_ptr[ EntryIdx ].setDefPtr(d_ptr); } // close the file dataFile.close(); } else { cout << ENTER << FILE_ERR_MSG << endl; exit(EXIT_FAILURE); } } /** * cleans up dynamic memory */ Dictionary::~Dictionary() { delete[] m_DictEntry_ptr; /// thou shalt not have memory leaks. } /** * Looks up definition */ /* const char *lookupDefinition( const char *word ) { // print out the word ---- definition } */ /** * prints out the entire dictionary in sorted order */ /* void forEach( WordDefFunc func ) { // to sort before or now.... that is the question } */ Entry.h/cpp #ifndef ENTRY_H #define ENTRY_H // /////////////////////////////////////////////////////////////////////////////////// // INCLUDES (C++ Std lib) #include <cstdlib> /// EXIT_SUCCESS, NULL // /////////////////////////////////////////////////////////////////////////////////// // PRE-PROCESSOR MACROS #define NIL '\0' /// C-String terminator #define MEM_ERR_MSG "Memory allocation has failed. Program will now terminate." // /////////////////////////////////////////////////////////////////////////////////// // CLASS DEFINITION class Entry { public: Entry(void) : m_word_ptr(NULL), m_def_ptr(NULL) { /* default constructor */ }; void setWordPtr(char *w_ptr); /// sets the pointer to the word - only if the pointer is empty void setDefPtr(char *d_ptr); /// sets the ponter to the definition - only if the pointer is empty /// returns what is pointed to by the word pointer char getWord(void) const { return *m_word_ptr; } /// returns what is pointed to by the definition pointer char getDef(void) const { return *m_def_ptr; } private: char *m_word_ptr; /** points to a dictionary word */ char *m_def_ptr; /** points to a dictionary definition */ }; #endif -------------------------------------------------- // /////////////////////////////////////////////////////////////////////////////////// // DEPENDENCIES (custom header files) #include "entry.h" /// class header file // /////////////////////////////////////////////////////////////////////////////////// // PUBLIC FUNCTIONS /* * only change the word member var if it is in its initial state */ void Entry::setWordPtr(char *w_ptr) { if(m_word_ptr == NULL) { m_word_ptr = w_ptr; } } /* * only change the def member var if it is in its initial state */ void Entry::setDefPtr(char *d_ptr) { if(m_def_ptr == NULL) { m_word_ptr = d_ptr; } }

    Read the article

  • :: Help Needed to parse ksoap response using J2ME ::

    - by Sachin
    Hi Guys, I am developing a mobile application using J2ME, LWUIT and KSOAP. The application makes .net webservice calls and fetches responses. I am able to successfully make calls and receive respone, but not able to parse the response, due to my limited knowledge in java. following is my WSDL file and j2me code snippet used to make calls. The WSDL file has complex and SIMPLETYPE elements, which needs to be mapped to JAVA classes. i request you guys to help me out with any pointers or sample code. WSDL file: <?xml version="1.0" encoding="utf-8"?> <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"> <wsdl:types> <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/"> <s:element name="Login"> <s:complexType> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="userLoginID" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" /> </s:sequence> </s:complexType> </s:element> <s:element name="LoginResponse"> <s:complexType> <s:sequence> <s:element minOccurs="1" maxOccurs="1" name="User" nillable="true" type="tns:UserBin" /> </s:sequence> </s:complexType> </s:element> <s:complexType name="UserBin" abstract="true"> <s:sequence> <s:element minOccurs="1" maxOccurs="1" name="CompanyCodeSeqId" type="s:int" /> <s:element minOccurs="0" maxOccurs="1" name="Image" type="s:base64Binary" /> <s:element minOccurs="1" maxOccurs="1" name="DateOfBirth" type="s:dateTime" /> <s:element minOccurs="1" maxOccurs="1" name="UserSeqId" type="s:int" /> <s:element minOccurs="0" maxOccurs="1" name="UserFirstName" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="UserLastName" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="PassWord" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="UserRole" type="tns:Roles" /> <s:element minOccurs="1" maxOccurs="1" name="UserSSN" type="s:int" /> <s:element minOccurs="0" maxOccurs="1" name="EmailId" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="MobileNumber" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="CreatedDate" type="s:dateTime" /> <s:element minOccurs="1" maxOccurs="1" name="ModifiedDate" type="s:dateTime" /> <s:element minOccurs="1" maxOccurs="1" name="UserGroup" type="tns:UserGroups" /> <s:element minOccurs="1" maxOccurs="1" name="SecretQuestionID" type="s:int" /> <s:element minOccurs="0" maxOccurs="1" name="SecretAnswer" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="WorkPhone" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="HomePhone" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="Company" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="PreviousLoginTime" type="s:dateTime" /> <s:element minOccurs="1" maxOccurs="1" name="LoginTime" type="s:dateTime" /> </s:sequence> </s:complexType> <s:simpleType name="Roles"> <s:restriction base="s:string"> <s:enumeration value="Guest" /> <s:enumeration value="Customer" /> <s:enumeration value="Driver" /> <s:enumeration value="Dispatcher" /> <s:enumeration value="CompanyCodeAdmin" /> </s:restriction> </s:simpleType> <s:simpleType name="UserGroups"> <s:restriction base="s:string"> <s:enumeration value="Invalid" /> <s:enumeration value="Customer" /> <s:enumeration value="Driver" /> <s:enumeration value="Dispatcher" /> </s:restriction> </s:simpleType> <s:complexType name="DriverBin"> <s:complexContent mixed="false"> <s:extension base="tns:UserBin"> <s:sequence> <s:element minOccurs="1" maxOccurs="1" name="DriverGroupId" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="DriverTypeId" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="HireDate" type="s:dateTime" /> <s:element minOccurs="0" maxOccurs="1" name="LicenceNumber" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="ExpiryDateForLicence" type="s:dateTime" /> <s:element minOccurs="0" maxOccurs="1" name="VehicleNumber" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="EmergencyName" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="EmergencyPhone" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="EmergencyAddress" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="EmergencyRelationship" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="DriverType" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="DriverGroupName" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="VehicleID" type="s:int" /> <s:element minOccurs="0" maxOccurs="1" name="SocialSN" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="StreetAddress" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="City" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="State" type="s:int" /> <s:element minOccurs="0" maxOccurs="1" name="Zip" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="EmergencyCity" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="EmergencyState" type="s:int" /> <s:element minOccurs="0" maxOccurs="1" name="EmergencyZip" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="TerminationDate" type="s:dateTime" /> <s:element minOccurs="1" maxOccurs="1" name="HireAgainFlag" type="s:boolean" /> <s:element minOccurs="0" maxOccurs="1" name="TerminationReason" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="Notes" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="ImageName" type="s:string" /> </s:sequence> </s:extension> </s:complexContent> </s:complexType> <s:complexType name="CustomerBin"> <s:complexContent mixed="false"> <s:extension base="tns:UserBin"> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="PassengesDetails" type="tns:ArrayOfPassengerBin" /> <s:element minOccurs="0" maxOccurs="1" name="CompanyName" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="CreditCardDetailsArray" type="tns:ArrayOfCreditCardDetailsBin" /> <s:element minOccurs="0" maxOccurs="1" name="AddressArray" type="tns:ArrayOfAddressBin" /> <s:element minOccurs="1" maxOccurs="1" name="CustomerCompanyID" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="CustomerType" type="tns:CustomerType" /> <s:element minOccurs="0" maxOccurs="1" name="PassengerGradeName" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="PassengerGradeID" type="s:int" /> </s:sequence> </s:extension> </s:complexContent> </s:complexType> <s:complexType name="ArrayOfPassengerBin"> <s:sequence> <s:element minOccurs="0" maxOccurs="unbounded" name="PassengerBin" nillable="true" type="tns:PassengerBin" /> </s:sequence> </s:complexType> <s:complexType name="PassengerBin"> <s:sequence> <s:element minOccurs="1" maxOccurs="1" name="CustomerSeqID" type="s:int" /> <s:element minOccurs="0" maxOccurs="1" name="EmailID" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="PhoneNumber" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="LastName" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="FirstName" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="PassengerSeqID" nillable="true" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="IsSelf" type="s:boolean" /> </s:sequence> </s:complexType> <s:complexType name="ArrayOfCreditCardDetailsBin"> <s:sequence> <s:element minOccurs="0" maxOccurs="unbounded" name="CreditCardDetailsBin" nillable="true" type="tns:CreditCardDetailsBin" /> </s:sequence> </s:complexType> <s:complexType name="CreditCardDetailsBin"> <s:sequence> <s:element minOccurs="1" maxOccurs="1" name="CardSeqID" nillable="true" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="ExpiryYear" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="ExpiryMonth" type="s:int" /> <s:element minOccurs="0" maxOccurs="1" name="CardType" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="NickName" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="CVVNumber" type="s:int" /> <s:element minOccurs="0" maxOccurs="1" name="CreditCardNumber" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="NameOnTheCard" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="ZipCode" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="IsPrimary" type="s:boolean" /> </s:sequence> </s:complexType> <s:complexType name="ArrayOfAddressBin"> <s:sequence> <s:element minOccurs="0" maxOccurs="unbounded" name="AddressBin" nillable="true" type="tns:AddressBin" /> </s:sequence> </s:complexType> <s:complexType name="AddressBin"> <s:sequence> <s:element minOccurs="1" maxOccurs="1" name="UserSeqID" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="AddressID" nillable="true" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="ZipCode" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="IsPrimary" type="s:boolean" /> <s:element minOccurs="0" maxOccurs="1" name="State" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="StateID" type="s:int" /> <s:element minOccurs="0" maxOccurs="1" name="StateCode" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="City" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="CityID" type="s:int" /> <s:element minOccurs="0" maxOccurs="1" name="StreetAddress" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="NickName" type="s:string" /> </s:sequence> </s:complexType> <s:simpleType name="CustomerType"> <s:restriction base="s:string"> <s:enumeration value="Individual" /> <s:enumeration value="Corporate" /> </s:restriction> </s:simpleType> <s:complexType name="DispatcherBin"> <s:complexContent mixed="false"> <s:extension base="tns:UserBin"> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="Address1" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="Address2" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="City" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="Province" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="ZipCode" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="IsActive" type="s:boolean" /> <s:element minOccurs="1" maxOccurs="1" name="DispatcherHireDate" type="s:dateTime" /> <s:element minOccurs="1" maxOccurs="1" name="DispatcherSSN" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="TerminationDate" type="s:dateTime" /> <s:element minOccurs="0" maxOccurs="1" name="ReasonForTermination" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="HireAgainFlag" type="s:boolean" /> <s:element minOccurs="0" maxOccurs="1" name="EmergencyContactName" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="EmergencyContactNumber" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="EmergencyContactAddress" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="EmergencyContactRelationship" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="HireDate" type="s:dateTime" /> </s:sequence> </s:extension> </s:complexContent> </s:complexType> <s:element name="Logout"> <s:complexType> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="userLoginID" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" /> <s:element minOccurs="1" maxOccurs="1" name="userSeqID" type="s:int" /> <s:element minOccurs="0" maxOccurs="1" name="validationKey" type="s:string" /> </s:sequence> </s:complexType> </s:element> <s:element name="LogoutResponse"> <s:complexType /> </s:element> </s:schema> </wsdl:types> <wsdl:message name="LoginSoapIn"> <wsdl:part name="parameters" element="tns:Login" /> </wsdl:message> <wsdl:message name="LoginSoapOut"> <wsdl:part name="parameters" element="tns:LoginResponse" /> </wsdl:message> <wsdl:message name="LogoutSoapIn"> <wsdl:part name="parameters" element="tns:Logout" /> </wsdl:message> <wsdl:message name="LogoutSoapOut"> <wsdl:part name="parameters" element="tns:LogoutResponse" /> </wsdl:message> <wsdl:portType name="AccountManagementSoap"> <wsdl:operation name="Login"> <wsdl:input message="tns:LoginSoapIn" /> <wsdl:output message="tns:LoginSoapOut" /> </wsdl:operation> <wsdl:operation name="Logout"> <wsdl:input message="tns:LogoutSoapIn" /> <wsdl:output message="tns:LogoutSoapOut" /> </wsdl:operation> </wsdl:portType> <wsdl:binding name="AccountManagementSoap" type="tns:AccountManagementSoap"> <soap:binding transport="http://schemas.xmlsoap.org/soap/http" /> <wsdl:operation name="Login"> <soap:operation soapAction="http://tempuri.org/Login" style="document" /> <wsdl:input> <soap:body use="literal" /> </wsdl:input> <wsdl:output> <soap:body use="literal" /> </wsdl:output> </wsdl:operation> <wsdl:operation name="Logout"> <soap:operation soapAction="http://tempuri.org/Logout" style="document" /> <wsdl:input> <soap:body use="literal" /> </wsdl:input> <wsdl:output> <soap:body use="literal" /> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:binding name="AccountManagementSoap12" type="tns:AccountManagementSoap"> <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" /> <wsdl:operation name="Login"> <soap12:operation soapAction="http://tempuri.org/Login" style="document" /> <wsdl:input> <soap12:body use="literal" /> </wsdl:input> <wsdl:output> <soap12:body use="literal" /> </wsdl:output> </wsdl:operation> <wsdl:operation name="Logout"> <soap12:operation soapAction="http://tempuri.org/Logout" style="document" /> <wsdl:input> <soap12:body use="literal" /> </wsdl:input> <wsdl:output> <soap12:body use="literal" /> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:service name="AccountManagement"> <wsdl:port name="AccountManagementSoap" binding="tns:AccountManagementSoap"> <soap:address location="http://webservice.mcubeit.com/trs_webservice/services/AccountManagement.asmx" /> </wsdl:port> <wsdl:port name="AccountManagementSoap12" binding="tns:AccountManagementSoap12"> <soap12:address location="http://webservice.mcubeit.com/trs_webservice/services/AccountManagement.asmx" /> </wsdl:port> </wsdl:service> </wsdl:definitions> J2ME Code Snippet: String uname = username.getText(); String pass = password.getText(); String serviceUrl = "http://xxx.xxx.xxx/webservice/services/AccountManagement.asmx"; String serviceNameSpace = "http://tempuri.org/"; String soapAction = "http://tempuri.org/Login"; String methodName = "Login"; SoapObject rpc = new SoapObject(serviceNameSpace, methodName); rpc.addProperty("userLoginID", uname.trim()); rpc.addProperty("password", pass.trim()); //rpc.addProperty("userSeqID", String.valueOf(192).toString()); SoapSerializationEnvelope envelope = new SoapSerializationEnvelope(SoapEnvelope.VER11); envelope.bodyOut = rpc; envelope.dotNet = true; envelope.encodingStyle = SoapSerializationEnvelope.ENC; HttpTransport ht = new HttpTransport(serviceUrl); ht.debug = true; ht.setXmlVersionTag("<?xml version=\"1.0\" encoding=\"UTF-8\"?>"); String result = null; try { ht.call(soapAction, envelope); result = (envelope.getResponse()).toString(); System.out.println("Result :" + result.toString()); } catch (org.xmlpull.v1.XmlPullParserException ex2) { System.out.println("XmlPullParserException :" + ex2.toString()); System.out.println("Request \n" + ht.requestDump); System.out.println("Response \n" + ht.responseDump); } catch (SoapFault sf) { System.out.println("SoapFault :" + sf.faultstring); System.out.println("Request \n" + ht.requestDump); System.out.println("Response \n" + ht.responseDump); } catch (IOException ioe) { System.out.println("IOException :" + ioe.toString()); System.out.println("Request \n" + ht.requestDump); System.out.println("Response \n" + ht.responseDump); } RESPONSE Result :CustomerBin{CompanyCodeSeqId=-1; Image=AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA==; DateOfBirth=1900-01-01T00:00:00; UserSeqId=192; UserFirstName=Sachin; UserLastName=Nevase; PassWord=anyType{}; UserRole=Customer; UserSSN=-2147483648; [email protected]; MobileNumber=804131244; CreatedDate=1900-01-01T00:00:00; ModifiedDate=1900-01-01T00:00:00; UserGroup=Customer; SecretQuestionID=-2147483648; SecretAnswer=anyType{}; WorkPhone=anyType{}; HomePhone=anyType{}; Company=anyType{}; PreviousLoginTime=2010-05-04T23:38:34; LoginTime=1900-01-01T00:00:00; PassengesDetails=anyType{PassengerBin=anyType{CustomerSeqID=192; [email protected]; PhoneNumber=0804131244; LastName=Nevase; FirstName=Sachin; PassengerSeqID=55; IsSelf=true; }; }; CustomerCompanyID=-1; CustomerType=Individual; PassengerGradeName=Grade1; PassengerGradeID=1; } Thanks, Sachin

    Read the article

< Previous Page | 109 110 111 112 113