Search Results

Search found 3308 results on 133 pages for 'quality assurance'.

Page 113/133 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

  • Feynman's inbox

    - by user12607414
    Here is Richard Feynman writing on the ease of criticizing theories, and the difficulty of forming them: The problem is not just to say something might be wrong, but to replace it by something — and that is not so easy. As soon as any really definite idea is substituted it becomes almost immediately apparent that it does not work. The second difficulty is that there is an infinite number of possibilities of these simple types. It is something like this. You are sitting working very hard, you have worked for a long time trying to open a safe. Then some Joe comes along who knows nothing about what you are doing, except that you are trying to open the safe. He says ‘Why don’t you try the combination 10:20:30?’ Because you are busy, you have tried a lot of things, maybe you have already tried 10:20:30. Maybe you know already that the middle number is 32 not 20. Maybe you know as a matter of fact that it is a five digit combination… So please do not send me any letters trying to tell me how the thing is going to work. I read them — I always read them to make sure that I have not already thought of what is suggested — but it takes too long to answer them, because they are usually in the class ‘try 10:20:30’. (“Seeking New Laws”, page 161 in The Character of Physical Law.) As a sometime designer (and longtime critic) of widely used computer systems, I have seen similar difficulties appear when anyone undertakes to publicly design a piece of software that may be used by many thousands of customers. (I have been on both sides of the fence, of course.) The design possibilities are endless, but the deep design problems are usually hidden beneath a mass of superfluous detail. The sheer numbers can be daunting. Even if only one customer out of a thousand feels a need to express a passionately held idea, it can take a long time to read all the mail. And it is a fact of life that many of those strong suggestions are only weakly supported by reason or evidence. Opinions are plentiful, but substantive research is time-consuming, and hence rare. A related phenomenon commonly seen with software is bike-shedding, where interlocutors focus on surface details like naming and syntax… or (come to think of it) like lock combinations. On the other hand, software is easier than quantum physics, and the population of people able to make substantial suggestions about software systems is several orders of magnitude bigger than Feynman’s circle of colleagues. My own work would be poorer without contributions — sometimes unsolicited, sometimes passionately urged on me — from the open source community. If a Nobel prize winner thought it was worthwhile to read his mail on the faint chance of learning a good idea, I am certainly not going to throw mine away. (In case anyone is still reading this, and is wondering what provoked a meditation on the quality of one’s inbox contents, I’ll simply point out that the volume has been very high, for many months, on the Lambda-Dev mailing list, where the next version of the Java language is being discussed. Bravo to those of my colleagues who are surfing that wave.) I started this note thinking there was an odd parallel between the life of the physicist and that of a software designer. On second thought, I’ll bet that is the story for anybody who works in public on something requiring special training. (And that would be pretty much anything worth doing.) In any case, Feynman saw it clearly and said it well.

    Read the article

  • A developer&rsquo;s WBS &ndash; 3 factors of 5

    - by johndoucette
    As a development manager, I have requested work breakdown structures (WBS) many times from the dev leads. Everyone has their own approach and why it takes sometimes days to get this simple list is often frustrating. Here is a simple way to get that elusive WBS done in 30 minutes and have 125 items in your list – well, 126. The WBS is made up of parent-child entities representing the overall outcome of the project. At the bottom of the hierarchical list should be the task item that a developer would perform in support of the branch in the list or WBS. Because I work with different dev leads on every project, I always ask the “what time value would you like to see at the lowest task in order to assign it to a developer and ensure it gets done within the timeframe”. I am particular to a task being 8 hours. Some like 8 to 24 hours. Stay away from tasks defaulting to 1 week. The task becomes way to vague and hard to manage completeness, especially on short budgets. As a developer, your focus is identifying the tasks you to accomplish in order to deliver the product. As a project manager, you will take the developer's WBS and add all the “other stuff” like quality testing, meetings, documentation, transition to maintenance, etc… Start your exercise with the name of the product you are delivering as a result of the project. You should be able to represent what you are building and deploying with one to three words. Example; XYZ Public Website Middleware BizTalk Application The reason you start with that single identifier is to always see the list as the product. It helps during each of the next three passes. Now, choose 5 tasks which in their entirety represent the product you will be delivering and add them to list under the product name you created earlier; Public Website     Security     Sites     Infrastructure     Publishing     Creative Continue this concept of seeing the list as the complete picture and decompose it one more level. You should have 25 items. Public Website     Security         Authentication         Login Control         Administration         DRM         Workflow     Sites         Masterpages         Page Layouts         Web Parts (RIA, Multimedia)         Content Types         Structures     Infrastructure         ...     Publishing         ...     Creative         ... And one more time for a total of 125 items. The top item makes the list 126. Public Website     Security         Authentication             Install (AD/ADAM/LDAP/SQL)             Configuration             Management             Web App Configuration             Implement Provider         Login Control             Login Form             Login/Logoff             pw change             pw recover/forgot             email verification         Administration             ...         DRM             ...         Workflow             ...     Sites         Masterpages         Page Layouts         Web Parts (RIA, Multimedia)         Content Types         Structures     Infrastructure         ...     Publishing         ...     Creative         ... The next step is to make sure the task at the bottom of every branch represents the “time value” you planned for the project. You can add more to the WBS and of course if you can’t find 5 items, 4 is fine. If a task can be done in a fraction of the time value you determined for the project, try to roll it up into a larger task. In the task actions (later when the iteration is being planned), decompose the details back to the simple tasks. Now, go estimate!

    Read the article

  • Part 6: Extensions vs. Modifications

    - by volker.eckardt(at)oracle.com
    Customizations = Extensions + Modifications In the EBS terminology, a customization can be an extension or a modification. Extension means that you mainly create your own code from scratch. You may utilize existing views, packages and java classes, but your code is unique. Modifications are quite different, because here you take existing code and change or enhance certain areas to achieve a slightly different behavior. Important is that it doesn't matter if you place your code at the same or at another place – it is a modification. It is also not relevant if you leave the original code enabled or not! Why? Here is the answer: In case the original code piece you have taken as your base will get patched, you need to copy the source again and apply all your changes once more. If you don't do that, you may get different results or write different data compared to the standard – this causes a high risk! Here are some guidelines how to reduce the risk: Invest a bit longer when searching for objects to select data from. Rather choose a view than a table. In case Oracle development changes the underlying tables, the view will be more stable and is therefore a better choice. Choose rather public APIs over internal APIs. Same background as before: although internal structure might change, the public API is more stable. Use personalization and substitution rather than modification. Spend more time to check if the requirement can be covered with such techniques. Build a project code library, avoid that colleagues creating similar functionality multiple times. Otherwise you have to review lots of similar code to determine the need for correction. Use the technique of “flagged files”. Flagged files is a way to mark a standard deployment file. If you run the patch analyse (within Application Manager), the analyse result will list flagged standard files in case they will be patched. If you maintain a cross reference to your own CEMLIs, you can easily determine which CEMLIs have to be reviewed. Implement a code review process. This can be done by utilizing team internal or external persons. If you implement such a team internal process, your team members will come up with suggestions how to improve the code quality by themselves. Review heavy customizations regularly, to identify options to reduce complexity; let's say perform this every 6th month. You may not spend days for such a review, but a high level cross check if the customization can be reduced is suggested. De-install customizations which are no more required. Define a process for this. Add a section into the technical documentation how to uninstall and what are possible implications. Maintain a cross reference between CEMLIs and between CEMLIs, EBS modules and business processes. Keep this list up to date! Share this list! By following these guidelines, you are able to improve product stability. Although we might not be able to avoid modifications completely, we can give a much better advise to developers and to our test team. Summary: Extensions and Modifications have to be handled differently during their lifecycle. Modifications implicate a much higher risk and should therefore be reviewed more frequently. Good cross references allow you to give clear advise for the testing activities.

    Read the article

  • An Actionable Common Approach to Federal Enterprise Architecture

    - by TedMcLaughlan
    The recent “Common Approach to Federal Enterprise Architecture” (US Executive Office of the President, May 2 2012) is extremely timely and well-organized guidance for the Federal IT investment and deployment community, as useful for Federal Departments and Agencies as it is for their stakeholders and integration partners. The guidance not only helps IT Program Planners and Managers, but also informs and prepares constituents who may be the beneficiaries or otherwise impacted by the investment. The FEA Common Approach extends from and builds on the rapidly-maturing Federal Enterprise Architecture Framework (FEAF) and its associated artifacts and standards, already included to a large degree in the annual Federal Portfolio and Investment Management processes – for example the OMB’s Exhibit 300 (i.e. Business Case justification for IT investments).A very interesting element of this Approach includes the very necessary guidance for actually using an Enterprise Architecture (EA) and/or its collateral – good guidance for any organization charged with maintaining a broad portfolio of IT investments. The associated FEA Reference Models (i.e. the BRM, DRM, TRM, etc.) are very helpful frameworks for organizing, understanding, communicating and standardizing across agencies with respect to vocabularies, architecture patterns and technology standards. Determining when, how and to what level of detail to include these reference models in the typically long-running Federal IT acquisition cycles wasn’t always clear, however, particularly during the first interactions of a Program’s technical and functional leadership with the Mission owners and investment planners. This typically occurs as an agency begins the process of describing its strategy and business case for allocation of new Federal funding, reacting to things like new legislation or policy, real or anticipated mission challenges, or straightforward ROI opportunities (for example the introduction of new technologies that deliver significant cost-savings).The early artifacts (i.e. Resource Allocation Plans, Acquisition Plans, Exhibit 300’s or other Business Case materials, etc.) of the intersection between Mission owners, IT and Program Managers are far easier to understand and discuss, when the overlay of an evolved, actionable Enterprise Architecture (such as the FEA) is applied.  “Actionable” is the key word – too many Public Service entity EA’s (including the FEA) have for too long been used simply as a very highly-abstracted standards reference, duly maintained and nominally-enforced by an Enterprise or System Architect’s office. Refreshing elements of this recent FEA Common Approach include one of the first Federally-documented acknowledgements of the “Solution Architect” (the “Problem-Solving” role). This role collaborates with the Enterprise, System and Business Architecture communities primarily on completing actual “EA Roadmap” documents. These are roadmaps grounded in real cost, technical and functional details that are fully aligned with both contextual expectations (for example the new “Digital Government Strategy” and its required roadmap deliverables - and the rapidly increasing complexities of today’s more portable and transparent IT solutions.  We also expect some very critical synergies to develop in early IT investment cycles between this new breed of “Federal Enterprise Solution Architect” and the first waves of the newly-formal “Federal IT Program Manager” roles operating under more standardized “critical competency” expectations (including EA), likely already to be seriously influencing the quality annual CPIC (Capital Planning and Investment Control) processes.  Our Oracle Enterprise Strategy Team (EST) and associated Oracle Enterprise Architecture (OEA) practices are already engaged in promoting and leveraging the visibility of Enterprise Architecture as a key contributor to early IT investment validation, and we look forward in particular to seeing the real, citizen-centric benefits of this FEA Common Approach in particular surface across the entire Public Service CPIC domain - Federal, State, Local, Tribal and otherwise. Read more Enterprise Architecture blog posts for additional EA insight!

    Read the article

  • Gaming on Cloud

    - by technomad
    Sometimes I wonder the pundits of cloud computing are way to consumed with the enterprise applications. With all the CAPEX / OPEX, ROI-talk taking the center stage, an opportunity to affect masses directly is getting overlooked. I am a self proclaimed die hard gamer. I come from the generation of gamers who started their journey in DOS games like Wolfenstein 3D and Allan Border Cricket (the latter is still a favorite pastime). In the late 90s, a revolution called accelerated graphics started in DirectX and OpenGL. Games got more advanced. Likes of Quake III and Unreal Tournament became the crown jewels of the industry. But with all these advancements, there started a race. A race of GFX giants ATI and NVIDIA to beat each other for better frame and image quality. Revisions to the graphics chipsets became frequent. Games became eye candies but at the cost of more GPU power / memory. Every eagerly awaited title started demanding more muscle power in graphics and PC hardware. Latest games and all the liquid smooth frame rates became the territory of the once with deep pockets who could spend lavishly on latest hardware. Enthusiasts like yours truly, who couldn’t afford this route, started exploring over-clocking, optimized hardware cooling... etc. to pursue the passion. Ever rising cost of hardware requirements lead to rampant piracy of PC games. Gamers were willing to spend on the latest titles, but the ones with tight budget prefer hardware upgrades against a legal copy of the game. It was also fueled by emergence of the P2P file sharing networks. Then came the era of Xbox and PS3s. It solved the major issue of hardware standardization and provided an alternative to ever increasing hardware costs. I have always admired these consoles, but being born and brought up in a keyboard/mouse environment, I still find it difficult to play first person shooters with a gamepad. I leave the topic of PC v/s Consol gaming for another day, but the bottom line is… PC gamers deserve an equally democratized solution. This is where I think Cloud Computing can come to rescue. It can minimize hardware requirements. Virtually end the software piracy and rationalize costs for gamers. Subscription based models like pay-as-you-play. In game rewards, like extended subscription credits for exceptional gamers (oh yes, I have beaten Xaero on nightmare in Quake III, time and again!) Easy deployment for patches and fixes. Better game AI. The list goes on and on… Fortunately, companies like OnLive are thinking in the same direction. Their gaming service is all set to launch on 17th June 2010 in E3 2010 expo in L.A. I wish them all the luck. I hope they will start a trend which will bring the smiles back on the face of budget gamers with the help of cloud computing.

    Read the article

  • Oracle ties social, CRM, analytics products to customer experience

    - by Richard Lefebvre
    Oracle will embark on a new product strategy that centers on customer experience management, an approach driven by the company’s many recent acquisitions.  The new approach, announced by the company Monday night, will be seen in an expansive suite that features familiar Oracle products -- such as its Fusion CRM platform -- and offerings the company recently gained through acquisitions, including FatWire, RightNow and Vitrue. Billed as Oracle Customer Experience (CX), the suite enables businesses to respond to a market centered on the customer experience, said Anthony Lye, the company’s senior vice president of CRM. Companies “are very aware their products are commoditizing,” Lye said in an interview last week, referring to how the Web and social media channels have empowered customers. Customer experiences start and mature outside of CRM, and applications today need to reflect that shift, Lye said. Businesses thus need to step away from a pure CRM model, he said. Oracle claims CX will improve customer experience management by connecting businesses with customers across Web sites and social channels. Companies can create a single, real-time view of the customer and use predictive analytics of interactions to strengthen the customer experience, Oracle said. “Companies have to connect with their customers wherever, whenever and however they want,” Lye said. “They have to know and understand their customer.” Lye promoted Oracle CX as a suite that will work across channels to complement the company’s applications. A new strategy has been “cooking” for years now, but the acquisitions Oracle has made over the past two years made the time right for a “unique collaboration,” Lye said. CX includes basic Oracle CRM solutions such as Siebel and the new Fusion Apps. It also includes the company’s MDM products, Enterprise Data Quality, Customer Hub and Product Hub. And the suite is rounded out by the services that Oracle recently bought, transactions that created or enhanced the company’s presence in social, marketing, e-commerce and customer service. For instance, FatWire provides tools for marketing. ATG focuses on e-commerce. And RightNow specializes in customer service. Two recent acquisitions -- Collective Intellect and Vitrue -- gave Oracle a seat at the social table. Collective Intellect is a social intelligence program, and Vitrue is a social marketing and engagement platform. Those acquisitions have yet to be finalized. Oracle hopes to eventually integrate the two social offerings, as well as most of the other services, into the CX suite. CX can integrate on Oracle’s standard middleware, and can give users a lower TCO by leveraging it as a single stack on premise or as a cloud solution. Lye deferred questions about the pricing of CX, and instead pitched Oracle’s ability to offer multiple customer experience solutions in one suite. Businesses have struggled with the complexity of infrastructure and modern services that communicate with customers, Lye said. “They’ve struggled to pull all these things together. We’ve done that,” he said. Stephen Powers, a research director at Forrester Research Inc. in Cambridge, Mass., said it’s not surprising for Oracle to offer the CX suite and a related customer experience strategy.  “They’ve got CRM, ATG, FatWire. Clearly, it’s been the strategy for them,” he said. But the challenge for Oracle, and for any other vendor that has gone on an “acquisition spree,” is to connect its many products, Powers said. “The portfolio has to be more than the parts. They’ve got to realize the efficiencies and value of having these pieces to tie them together,” he said. “The proof is in the pudding. Adobe has done a nice job in its space with the products they’ve got. Now, Oracle has got to show it has something.” Albert McKeon (SearchCRM) Published: 25 Jun 2012 : http://searchcrm.techtarget.com/news/2240158644/Oracle-ties-social-CRM-analytics-products-to-customer-experience

    Read the article

  • Dallas First Regionals 2012&ndash; For Inspiration and Recognition of Science and Technology

    - by T
    Wow!  That is all I have to say after the last 3 days. Three full fun filled days in a world that fed the geek, sparked the competitor, inspired the humanitarian, encouraged the inventor, and continuously warmed my heart.  As part of the Dallas First Regionals, I was awed by incredible students who teach as much as they learn, inventive and truly caring mentors that make mentoring look easy, and completely passionate and dedicated volunteers that bring meaning to giving all that you have and making events fun and safe for all.  If you have any interest in innovation, robotics, or highly motivated students, I can’t recommend anything any higher than visiting a First Robotics event. This is my third year with First and I was honored enough to serve the Dallas First Regionals as both a Web Site evaluator and as the East Field Volunteer Coordinator.  This was also the first year my daughter volunteered with me.  My daughter and I both recognize how different the First program is from other team events.  The difference with First is that everyone is a first class citizen.   It is a difference we can feel through experiencing and observing interactions between executives, respected engineers, students, and event staff.  Even with a veracious competition, you still find a lot of cooperation and we never witnessed any belittling between teams or individuals. First Robotics coined the term “Gracious Professionalism”.   It's a way of doing things that encourages high-quality work, emphasizes the value of others, and respects individuals and the community.1 I was introduced to this term as the Volunteer Coordinator when I was preparing the volunteer instructional speech.  Through the next few days, I discovered it is truly core to everything that First does.  One of the ways First accomplishes Gracious Professionalism is by utilizing another term they came up with which is “CoopertitionTM”. At FIRST, CoopertitionTM is displaying unqualified kindness and respect in the face of fierce competition.1   One of the things I never liked about sports was the need to “destroy” the other team.  First has really found a way to integrate CoopertitionTM  into the rules so teams can be competitive and part of that competition rewards cooperation. Oh and did I mention it has ROBOTS!!!  This year it had basket ball playing Kinect connected, remote controlled, robots!  There are not words for how exciting these games are.  You HAVE to check out this years game, Rebound Rumble, on youtube or you can view live action on Dallas First Video (as of this posting, the recording haven’t posted yet but should be there soon).  There are also some images below. Whatever it is, these students get it and exemplify it and these mentors ooze with it.  I am glad that First supports these events so we can all learn and be inspired by these exceptional students and mentors.  I know that no matter how much I give, it will never compare to what I gain volunteering at First.  Even if you don’t have time to volunteer, you owe it to yourself to go check out one of these events.  See what the future holds, be inspired, be encouraged, take some knowledge, leave some knowledge and most of all, have FUN.  That is what First is all about and thanks to First, I get it.   First Dallas Regionals 2012 VIEW SLIDE SHOW DOWNLOAD ALL 1.  USFirst http://www.usfirst.org/aboutus/gracious-professionalism

    Read the article

  • Move on and look elsewhere, or confront the boss?

    - by Meister
    Background: I have my Associates in Applied Science (Comp/Info Tech) with a strong focus in programming, and I'm taking University classes to get my Bachelors. I was recently hired at a local company to be a Software Engineer I on a team of about 8, and I've been told they're looking to hire more. This is my first job, and I was offered what I feel to be an extremely generous starting salary ($30/hr essentially + benefits and yearly bonus). What got me hired was my passion for programming and a strong set of personal projects. Problem: I had no prior experience when I interviewed, so I didn't know exactly what to ask them about the company when I was hired. I've spotted a number of warning signs and annoyances since then, such as: Four developers when I started, with everyone talking about "Ben" or "Ryan" leaving. One engineer hired thirty days before me, one hired two weeks after me. Most of the department has been hiring a large number of people since I started. Extremely limited internet access. I understand the idea from an IT point of view, but not only is Facebook blocked, but so it Youtube, Twitter, and Pandora. I've also figured out that they block all access to non-DNS websites (http://xxx.xxx.xxx.xxx/) and strangely enough Miranda-IM. Low cubicles. Which is fine because I like my immediate coworkers, but they put the developers with the customer service, customer training, and QA department in a huge open room. Noise, noise, noise, and people stop to chitchat all day long. Headphones only go so far. Several emails have been sent out by my boss since I started telling us programmers to not talk about non-work-related-things like Video Games at our cubicles, despite us only spending maybe five minutes every few hours doing so. Further digging tells me that this is because someone keeps complaining that the programmers are "slacking off". People are looking over my shoulder all day. I was in the Freenode webchat to get help with a programming issue, and within minutes I had an email from my boss (to all the developers) telling us that we should NOT be connected to any outside chat servers at work. Version control system from 2005 that we must access with IE and keep the Java 1.4 JRE installed to be able to use. I accidentally updated to Java 6 one day and spent the next two days fighting with my PC to undo this "problem". No source control, no comments on anything, no standards, no code review, no unit testing, no common sense. I literally found a problem in how they handle string resource translations that stems from the simple fact that they don't trim excess white spaces, leading to developers doing: getResource("Date: ") instead of: getResource("Date") + ": ", and I was told to just add the excess white spaces back to the database instead of dealing with the issue directly. Some of these things I'd like to try to understand, but I like having IRC open to talk in a few different rooms during the day and keep in touch with friends/family over IM. They don't break my concentration (not NEARLY as much as the lady from QA stopping by to talk about her son), but because people are looking over my shoulder all day as they walk by they complain when they see something that's not "programmer-looking work". I've been told by my boss and QA that I do good, fast work. I should be judged on my work output and quality, not what I have up on my screen for the five seconds you're walking by So, my question is, even though I'm just barely at my 90 days: How do you decide to move on from a job and looking elsewhere, or when you should start working with your boss to resolve these issues? Is it even possible to get the boss to work with me in many of these things? This is the only place I heard back from even though I sent out several resume's a day for several months, and this place does pay well for putting up with their many flaws, but I'm just starting to get so miserable working here already. Should I just put up with it?

    Read the article

  • Reaching to the Holy Grail of Data Management

    - by Irem Radzik
    Pervasive, continuous access to trusted data. That’s the ultimate goal of data management. It enables to leverage data as an asset to create value for customers and the organization. It creates the strong foundation needed to move the business forward. How you get there is also critical. As with all IT initiatives using high performance solutions with low cost of ownership is another key requirement in today’s IT world. Oracle's  data integration product strategy focuses on helping customers achieve this ultimate goal with high performance and low TCO.  At OpenWorld, we will be showing how Oracle Data Integration products help you reach your data management goals, considering new trends in information management, such as big data and cloud computing. We will also provide an update on the latest product releases, such as Oracle GoldenGate 11gR2. If you will be at OpenWorld, please join us on Monday Oct 1st 10:45am at Moscone West – 3005 to hear our VP of Product Development, Brad Adelberg, present "Future Strategy, Direction, and Roadmap of Oracle’s Data Integration Platform". The Data Integration track at OpenWorld covers variety of topics and speakers. In addition to product management of Oracle GoldenGate, Oracle Data Integrator, and Enteprise Data Quality presenting product updates and roadmap, we have several customer panels and stand-alone sessions featuring select customers such as St. Jude Medical, Raymond James, Aderas, Turkcell, Paychex, Comcast,  Ticketmaster, Bank of America and more. You can see an overview of Data Integration sessions here. If you are not able to attend OpenWorld, please check out our latest resources for Data Integration and Oracle GoldenGate. In the coming weeks you will see more blogs about our products’ new capabilities and what to expect at OpenWorld. I hope to see you at OpenWorld and stay in touch via our future blogs. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

    Read the article

  • What's wrong with my wireless?

    - by dazzle
    I am having issues with my wireless connection. My connection is constantly disconnecting, then attempting to reconnect, reconnecting momentarily, then disconnecting etc. on times scales that range from seconds to minutes. In the meantime, needless to say I'm having significant packet loss. I'm running Ubuntu 14.04 64bit, updated and upgraded to today. Here is my card and driver: delta@sager:~$ lspci -vq | grep -i wireless -B 1 -A 5 04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi Here is my kernel: delta@sager:~$ uname -r 3.13.0-34-generic None of the other machines on my home network are having these issues. Windows Vista is networking without issue for goodness sake ;-) Here is a small clipping from the output of dmesg. As you can see, I am getting a cfg80211 message of some sort over and over again (FYI, I've replaced my MAC address with a series of dashes, so anytime there is a ---------------, that was where the MAC address was: [ 1881.739161] wlan1: authenticate with --------------- [ 1881.741561] wlan1: send auth to --------------- (try 1/3) [ 1881.743440] wlan1: authenticated [ 1881.746027] wlan1: associate with --------------- (try 1/3) [ 1881.749244] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1881.754727] wlan1: associated [ 1881.754827] cfg80211: Calling CRDA for country: US [ 1881.761552] cfg80211: Regulatory domain changed to country: US [ 1881.761559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1881.761564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1881.761568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1881.761571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761574] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761577] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1881.761584] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1882.391038] cfg80211: Calling CRDA to update world regulatory domain [ 1882.396254] cfg80211: World regulatory domain updated: [ 1882.396260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1882.396265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1882.396274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.148252] wlan1: authenticate with --------------- [ 1886.150005] wlan1: send auth to --------------- (try 1/3) [ 1886.151807] wlan1: authenticated [ 1886.154847] wlan1: associate with --------------- (try 1/3) [ 1886.158147] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1886.163464] wlan1: associated [ 1886.163520] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by --------------- [ 1886.163588] cfg80211: Calling CRDA for country: US [ 1886.170500] cfg80211: Regulatory domain changed to country: US [ 1886.170508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1886.170513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1886.170517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1886.170520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170523] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170526] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1886.170533] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1887.200197] cfg80211: Calling CRDA to update world regulatory domain [ 1887.203655] cfg80211: World regulatory domain updated: [ 1887.203659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1887.203662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1887.203668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I've poked around on AskUbuntu, and have not found any adequate solutions; have also found similar threads that were left unanswered. Any advice/experience/threads I might be able to pull on would be greatly appreciated. In your opinion, is this a kernel issue, hardware issue, etc.? Thanks in advance. EDIT: chili, here's the output of iwconfig: delta@sager:~$ iwconfig wlan1 IEEE 802.11abg ESSID:"LANbeforetime" Mode:Managed Frequency:2.412 GHz Access Point: ----------- Bit Rate=48 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=44/70 Signal level=-66 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 eth0 no wireless extensions. lo no wireless extensions.

    Read the article

  • Know your Data Lineage

    - by Simon Elliston Ball
    An academic paper without the footnotes isn’t an academic paper. Journalists wouldn’t base a news article on facts that they can’t verify. So why would anyone publish reports without being able to say where the data has come from and be confident of its quality, in other words, without knowing its lineage. (sometimes referred to as ‘provenance’ or ‘pedigree’) The number and variety of data sources, both traditional and new, increases inexorably. Data comes clean or dirty, processed or raw, unimpeachable or entirely fabricated. On its journey to our report, from its source, the data can travel through a network of interconnected pipes, passing through numerous distinct systems, each managed by different people. At each point along the pipeline, it can be changed, filtered, aggregated and combined. When the data finally emerges, how can we be sure that it is right? How can we be certain that no part of the data collection was based on incorrect assumptions, that key data points haven’t been left out, or that the sources are good? Even when we’re using data science to give us an approximate or probable answer, we cannot have any confidence in the results without confidence in the data from which it came. You need to know what has been done to your data, where it came from, and who is responsible for each stage of the analysis. This information represents your data lineage; it is your stack-trace. If you’re an analyst, suspicious of a number, it tells you why the number is there and how it got there. If you’re a developer, working on a pipeline, it provides the context you need to track down the bug. If you’re a manager, or an auditor, it lets you know the right things are being done. Lineage tracking is part of good data governance. Most audit and lineage systems require you to buy into their whole structure. If you are using Hadoop for your data storage and processing, then tools like Falcon allow you to track lineage, as long as you are using Falcon to write and run the pipeline. It can mean learning a new way of running your jobs (or using some sort of proxy), and even a distinct way of writing your queries. Other Hadoop tools provide a lot of operational and audit information, spread throughout the many logs produced by Hive, Sqoop, MapReduce and all the various moving parts that make up the eco-system. To get a full picture of what’s going on in your Hadoop system you need to capture both Falcon lineage and the data-exhaust of other tools that Falcon can’t orchestrate. However, the problem is bigger even that that. Often, Hadoop is just one piece in a larger processing workflow. The next step of the challenge is how you bind together the lineage metadata describing what happened before and after Hadoop, where ‘after’ could be  a data analysis environment like R, an application, or even directly into an end-user tool such as Tableau or Excel. One possibility is to push as much as you can of your key analytics into Hadoop, but would you give up the power, and familiarity of your existing tools in return for a reliable way of tracking lineage? Lineage and auditing should work consistently, automatically and quietly, allowing users to access their data with any tool they require to use. The real solution, therefore, is to create a consistent method by which to bring lineage data from these data various disparate sources into the data analysis platform that you use, rather than being forced to use the tool that manages the pipeline for the lineage and a different tool for the data analysis. The key is to keep your logs, keep your audit data, from every source, bring them together and use the data analysis tools to trace the paths from raw data to the answer that data analysis provides.

    Read the article

  • Managing Operational Risk of Financial Services Processes – part 2/2

    - by Sanjeev Sharma
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} In my earlier blog post, I had described the factors that lead to compliance complexity of financial services processes. In this post, I will outline the business implications of the increasing process compliance complexity and the specific role of BPM in addressing the operational risk reduction objectives of regulatory compliance. First, let’s look at the business implications of increasing complexity of process compliance for financial institutions: · Increased time and cost of compliance due to duplication of effort in conforming to regulatory requirements due to process changes driven by evolving regulatory mandates, shifting business priorities or internal/external audit requirements · Delays in audit reporting due to quality issues in reconciling non-standard process KPIs and integrity concerns arising from the need to rely on multiple data sources for a given process Next, let’s consider some approaches to managing the operational risk of business processes. Financial institutions considering reducing operational risk of their processes, generally speaking, have two choices: · Rip-and-replace existing applications with new off-the shelf applications. · Extend capabilities of existing applications by modeling their data and process interactions, with other applications or user-channels, outside of the application boundary using BPM. The benefit of the first approach is that compliance with new regulatory requirements would be embedded within the boundaries of these applications. However pre-built compliance of any packaged application or custom-built application should not be mistaken as a one-shot fix for future compliance needs. The reason is that business needs and regulatory requirements inevitably out grow end-to-end capabilities of even the most comprehensive packaged or custom-built business application. Thus, processes that originally resided within the application will eventually spill outside the application boundary. It is precisely at such hand-offs between applications or between overlaying processes where vulnerabilities arise to unknown and accidental faults that potentially result in errors and lead to partial or total failure. The gist of the above argument is that processes which reside outside application boundaries, in other words, span multiple applications constitute a latent operational risk that spans the end-to-end value chain. For instance, distortion of data flowing from an account-opening application to a credit-rating system if left un-checked renders compliance with “KYC” policies void even when the “KYC” checklist was enforced at the time of data capture by the account-opening application. Oracle Business Process Management is enabling financial institutions to lower operational risk of such process ”gaps” for Financial Services processes including “Customer On-boarding”, “Quote-to-Contract”, “Deposit/Loan Origination”, “Trade Exceptions”, “Interest Claim Tracking” etc.. If you are faced with a similar challenge and need any guidance on the same feel free to drop me a note.

    Read the article

  • Need help with chronic slow wifi connections

    - by mgeorge
    I have had chronic slow wifi connections on several networks for a while now, I think since my update to 12.04 when it came out. I have tried many of the tips and tricks already available out there in the forums with no luck (wicd, etc..). I want to see if any of you experts out there might be able to help me, and thanks in advance!! I use ubuntu 12.04 on a lenovo ideapad y650, and most networks I connect to lose the connection frequently or do not give appropriate bandwidth when I am connected. Here are some results of the usual go-to system checks: cat /etc/lsb-release; uname -a: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" Linux mgeorge-lenovo 3.2.0-48-generic-pae #74-Ubuntu SMP Thu Jun 6 20:05:01 UTC 2013 i686 i686 i386 GNU/Linux lspci -nnk | grep -iA2 net: 04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211] Kernel driver in use: iwlwifi -- 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) Subsystem: Lenovo Device [17aa:3878] Kernel driver in use: tg3 lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 090c:7371 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) iwconfig: lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"Dyno" Mode:Managed Frequency:2.412 GHz Access Point: CC:5D:4E:46:0A:93 Bit Rate=150 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-40 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:948 Invalid misc:728 Missed beacon:0 eth0 no wireless extensions. rfkill list all: 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsmod: Module Size Used by uvcvideo 67203 0 videodev 86588 1 uvcvideo nouveau 712674 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197641 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau mxm_wmi 12893 1 nouveau wmi 18744 1 mxm_wmi joydev 17393 0 arc4 12473 2 snd_hda_codec_realtek 174313 1 snd_hda_codec_hdmi 31775 1 snd_hda_intel 32719 3 snd_hda_codec 109562 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80916 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi psmouse 86520 0 snd_seq 51592 2 snd_seq_midi,snd_seq_midi_event serio_raw 13027 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq iwlwifi 366509 0 mac80211 436493 1 iwlwifi snd 62218 16 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,sn d_rawmidi,snd_seq,snd_timer,snd_seq_device ideapad_laptop 17890 0 sparse_keymap 13658 1 ideapad_laptop cfg80211 178877 2 iwlwifi,mac80211 ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm ir_mce_kbd_decoder 12681 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 ir_rc6_decoder 12459 0 ir_rc5_decoder 12459 0 rc_rc6_mce 12454 0 ir_nec_decoder 12459 0 video 19115 1 nouveau ene_ir 18019 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ene_ir bnep 17830 2 rfcomm 38139 0 parport_pc 32114 0 bluetooth 158479 10 bnep,rfcomm ppdev 12849 0 binfmt_misc 17292 1 mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141414 0 nm-tool: NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: tg3 State: unavailable Default: no HW Address: 00:23:5A:CC:85:BD Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 [Dyno] -------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: yes HW Address: 00:22:FA:D0:94:CA Capabilities: Speed: 150 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) *Dyno: Infra, CC:5D:4E:46:0A:93, Freq 2412 MHz, Rate 54 Mb/s, Strength 81 WPA2 IPv4 Settings: Address: 10.0.0.43 Prefix: 24 (255.255.255.0) Gateway: 10.0.0.1 DNS: 10.0.0.1

    Read the article

  • Capgemini Global Business Process Management Report

    - by JuergenKress
    Welcome to the Capgemini Global Business Process Management (BPM) Report. This report is an exploration of key trends in BPM as seen by CXOs across a broad selection of sectors and geographies. BPM is perhaps at a tipping point - it’s certainly at an exciting stage in its evolution. As both an engineer and an Operational Research practitioner in my early career, and subsequently as a consultant, I have seen BPM through its development over the last 26 years. BPM has its roots in management practices such as Total Quality Management, Business Process Reengineering & Model Based Development; but the advent of the new generation of sophisticated modelling and process execution technologies has greatly enhanced BPM’s power to truly transform businesses. This has created one of the most rapidly growing and attractive market sectors for both services and technology. We see BPM as a critical management discipline that when executed against clear, cross organizational business objectives, can deliver exceptional value to that organization. However, we also see that the potential for BPM is not well understood. Our decision to conduct this global survey stemmed from discussions with our clients. We sought to gain a better impression of their understanding of BPM, how they measure its value, and how far it is prioritized within their Business and Technology Transformation efforts. This research confirms our belief that BPM needs to be a jointly owned Business and IT discipline. It also demonstrates that it is starting to gain significant traction in the market and investments are starting to pay dividends to the early adopters. At Capgemini we are being asked by our clients to help them simplify and improve their business models and the technology that supports them and we are already seeing BPM become an integral and key part of this proposition. Business Process Management is becoming ever more relevant to both large and small organizations in the current economic climate. At a time when many different market sectors are facing slow revenue growth, customer churn and increased pressures on costs, BPM becomes a critical weapon in the battle for efficiency and effectiveness in processes. Furthermore, in a challenging and changing business environment that is characterized by uncertainty, it allows organizations to adapt, be more agile and fleet of foot. Capgemini is seeing strong demand for BPM services in markets such as the USA, the UK, the Netherlands and France; and there are clear signs of increased interest in other geographies such as, Germany, Sweden, Spain, Italy and Australia. In sector terms, the financial services industry has led the way in BPM adoption over the recent past, driven by increased focus on customer- centricity and regulatory compliance. Other sectors, public sector, utilities, telco, retail and manufacturing are now not only catching up, but are starting o use BPM in new ways to create new business models to serve customers and outsmart the competition. The research findings also show however that this is a complex landscape, and we are not seeing adoption of BPM in a clear and consistent way. This report also looks at some of the barriers to adoption, with organizational silos being a major obstacle. Waters are further muddied by fragmented budgets, lack of clear governance and ownership and internal politics. The objective of our investment in this research project was to shed some light on these elements with a view to assisting organizations to create strategies that avoid or at least mitigate some of these barriers to success. Management of change in such endea vours is a key part in enabling the appropriate alignment of business and technology to support their transformation efforts. I hope that you find this report of benefit in the further adoption of Business Process Management. Get the full report here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Technorati Tags: Capgemini,bpm report,bpm market,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • BI&EPM in Focus Sep 2012

    - by Mike.Hallett(at)Oracle-BI&EPM
    Customers ·       Iluka Resources Improves Business Insight into Mining Operations Through Significantly Faster, Customized Analyses ·       Waikato Regional Council Consolidates Financial Reports up to 10 Times Faster  ·       Lojas Renner Shortens Budget Consolidation from Three Days to 15 Minutes; Improves Data Quality, and Supports Aggressive Expansion Plans  ·       Link to Complete Archive ·       Profit Magazine article featuring General Dynamics: RECONnomics: Integrate. Innovate. Grow (link) ·       Video: Goodhope Asia Unifies Financial Data with Oracle Hyperion (link)   Enterprise Performance Management ·       Oracle University Training on Demand: 1.     Oracle Hyperion Financial Reporting 11.1.2 for Financial Management (link) 2.     Oracle Essbase Bootcamp: On Demand (link) 3.     Oracle Hyperion Planning 11.1.2: Create & Manage Applications On Demand (link)   Business Intelligence ·       Oracle University Training on Demand: 1.     Learn How to Create Analyses, Dashboards with OBI 11g (link) 2.     Build Repositories with Oracle Business Intelligence 11g (link) 3.     Oracle BI Publisher 11g Fundamentals (link) 4.     Oracle BI Applications Courses now available for 7.9.6  (link) 5.     Oracle BI 11g: New Features and Exalytics ·       Oracle Business Intelligence Release 11.1.1.6.2BP, updated information: 1.     Oracle BI Mobile at the Speed of Thought 2.     What's New in Oracle Business Intelligence Mobile 3.     What's New in Oracle Business Intelligence Visualizations 4.     Oracle Business Intelligence on Oracle.com 5.     Download the New Release ·       Discover How to Turn Data into Insight: Big Data Guide : Whitepaper and set of short Videos. ·       New OPN Specialisation Exam for OBI 11g Certification . ·       Lastest BIC2g and Exalytics Demonstration VMs for Partners . ·       New Version 2.3 Oracle Endeca Information Discovery and Server now available . ·       New Oracle BI Publisher 11.1.1.6 Trial Edition Now Available .

    Read the article

  • How can a developer realize the full value of his work [closed]

    - by Jubbat
    I, honestly, don't want to work as a developer in a company anymore after all I have seen. I want to continue developing software, yes, but not in the way I see it all around me. And I'm in London, a city that congregates lots of great developers from the whole world, so it shouldn't be a problem of location. So, what are my concerns? First of all, best case scenario: you are paying managers salary out of yours. You are consistently underpaid by making up for the average manager negative net return plus his whole salary. Typical scenario. I am a reasonably good developer with common sense who cares for readable code with attention to basic principles. I have found way too often, overconfident and arrogant developers with a severe lack of common sense. Personally, I don't want to follow TDD or Agile practices like all the cool kids nowadays. I would read about them, form my own opinion and take what I feel is useful, but don't follow it sheepishly. I want to work with people who understand that you have to design good interfaces, you absolutely have to document your code, that readability is at the top of your priorities. Also people who don't have a cargo cult mentality too. For instance, the same person who asked me about design patterns in a job interview, later told me that something like a List of Map of Vector of Map of Set (in Java) is very readable. Why would someone ask me about design patterns if they can't even grasp encapsulation? These kind of things are the norm. I've seen many examples. I've seen worse than that too, from very well paid senior devs, by the way. Every second that you spend working with people with such lack of common sense and clear thinking, you are effectively losing money by being terribly inefficient with your time. Yet, with all these inefficiencies, the average developer earns a high salary. So I tried working on my own then, although I don't like the idea. I prefer healthy exchange of opinions and ideas and task division. I then did a bit of online freelancing for a while but I think working in a sweatshop might be more enjoyable. Also, I studied computer engineering and you are in an environment in which your client will presume you don't have any formal education because there is no way to prove it. Again, you are undervalued. You could try building a product, yes. But, of course, luck is a big factor. I wonder if there is a way to work in something you can do well, software development, and be valued for the quality of your work and be paid accordingly, and where you and only you get fairly paid for the value you generate. I know that what I have written seems somehow unlikely but I strongly feel this way. Hopefully someone will understand me and has already figured this out. I don't think I'm alone in this kind of feeling.

    Read the article

  • ORE graphics using Remote Desktop Protocol

    - by Sherry LaMonica
    Oracle R Enterprise graphics are returned as raster, or bitmap graphics. Raster images consist of tiny squares of color information referred to as pixels that form points of color to create a complete image. Plots that contain raster images render quickly in R and create small, high-quality exported image files in a wide variety of formats. However, it is a known issue that the rendering of raster images can be problematic when creating graphics using a Remote Desktop connection. Raster images do not display in the windows device using Remote Desktop under the default settings. This happens because Remote Desktop restricts the number of colors when connecting to a Windows machine to 16 bits per pixel, and interpolating raster graphics requires many colors, at least 32 bits per pixel.. For example, this simple embedded R image plot will be returned in a raster-based format using a standalone Windows machine:  R> library(ORE) R> ore.connect(user="rquser", sid="orcl", host="localhost", password="rquser", all=TRUE)  R> ore.doEval(function() image(volcano, col=terrain.colors(30))) Here, we first load the ORE packages and connect to the database instance using database login credentials. The ore.doEval function executes the R code within the database embedded R engine and returns the image back to the client R session. Over a Remote Desktop connection under the default settings, this graph will appear blank due to the restricted number of colors. Users who encounter this issue have two options to display ORE graphics over Remote Desktop: either raise Remote Desktop's Color Depth or direct the plot output to an alternate device. Option #1: Raise Remote Desktop Color Depth setting In a Remote Desktop session, all environment variables, including display variables determining Color Depth, are determined by the RCP-Tcp connection settings. For example, users can reduce the Color Depth when connecting over a slow connection. The different settings are 15 bits, 16 bits, 24 bits, or 32 bits per pixel. To raise the Remote Desktop color depth: On the Windows server, launch Remote Desktop Session Host Configuration from the Accessories menu.Under Connections, right click on RDP-Tcp and select Properties.On the Client Settings tab either uncheck LimitMaximum Color Depth or set it to 32 bits per pixel. Click Apply, then OK, log out of the remote session and reconnect.After reconnecting, the Color Depth on the Display tab will be set to 32 bits per pixel.  Raster graphics will now display as expected. For ORE users, the increased color depth results in slightly reduced performance during plot creation, but the graph will be created instead of displaying an empty plot. Option #2: Direct plot output to alternate device Plotting to a non-windows device is a good option if it's not possible to increase Remote Desktop Color Depth, or if performance is degraded when creating the graph. Several device drivers are available for off-screen graphics in R, such as postscript, pdf, and png. On-screen devices include windows, X11 and Cairo. Here we output to the Cairo device to render an on-screen raster graphic.  The grid.raster function in the grid package is analogous to other grid graphical primitives - it draws a raster image within the current plot's grid.  R> options(device = "CairoWin") # use Cairo device for plotting during the session R> library(Cairo) # load Cairo, grid and png libraries  R> library(grid) R> library(png)  R> res <- ore.doEval(function()image(volcano,col=terrain.colors(30))) # create embedded R plot  R> img <- ore.pull(res, graphics = TRUE)$img[[1]] # extract image  R> grid.raster(as.raster(readPNG(img)), interpolate = FALSE) # generate raster graph R> dev.off() # turn off first device   By default, the interpolate argument to grid.raster is TRUE, which means that what is actually drawn by R is a linear interpolation of the pixels in the original image. Setting interpolate to FALSE uses a sample from the pixels in the original image.A list of graphics devices available in R can be found in the Devices help file from the grDevices package: R> help(Devices)

    Read the article

  • Creating a Corporate Data Hub

    - by BuckWoody
    The Windows Azure Marketplace has a rich assortment of data and software offerings for you to use – a type of Software as a Service (SaaS) for IT workers, not necessarily for end-users. Among those offerings is the “Data Hub” – a  codename for a project that ironically actually does what the codename says. In many of our organizations, we have multiple data quality issues. Finding data is one problem, but finding it just once is often a bigger problem. Lots of departments and even individuals have stored the same data more than once, and in some cases, made changes to one of the copies. It’s difficult to know which location or version of the data is authoritative. Then there’s the problem of accessing the data. It’s fairly straightforward to publish a database, share or other location internally to store the data. But then you have to figure out who owns it, how it is controlled, and pass out the various connection strings to those who want to use it. And then you need to figure out how to let folks access the internal data externally – bringing up all kinds of security issues. Finally, in many cases our user community wants us to combine data from the internally sources with external data, bringing up the security, strings, and exploration features up all over again. Enter the Data Hub. This is an online offering, where you assign an administrator and data stewards. You import the data into the service, and it’s available to you - and only you and your organization if you wish. The basic steps for this service are to set up the portal for your company, assign administrators and permissions, and then you assign data areas and import data into them. From there you make them discoverable, and then you have multiple options that you or your users can access that data. You’re then able, if you wish, to combine that data with other data in one location. So how does all that work? What about security? Is it really that easy? And can you really move the data definition off to the Subject Matter Experts (SME’s) that know the particular data stack better than the IT team does? Well, nothing good is easy – but using the Data Hub is actually pretty simple. I’ll give you a link in a moment where you can sign up and try this yourself. Once you sign up, you assign an administrator. From there you’ll create data areas, and then use a simple interface to bring the data in. All of this is done in a portal interface – nothing to install, configure, update or manage. After the data is entered in, and you’ve assigned meta-data to describe it, your users have multiple options to access it. They can simply use the portal – which actually has powerful visualizations you can use on any platform, even mobile phones or tablets.     Your users can also hit the data with Excel – which gives them ultimate flexibility for display, all while using an authoritative, single reference for the data. Since the service is online, they can do this wherever they are – given the proper authentication and permissions. You can also hit the service with simple API calls, like this one from C#: http://msdn.microsoft.com/en-us/library/hh921924  You can make HTTP calls instead of code, and the data can even be exposed as an OData Feed. As you can see, there are a lot of options. You can check out the offering here: http://www.microsoft.com/en-us/sqlazurelabs/labs/data-hub.aspx and you can read the documentation here: http://msdn.microsoft.com/en-us/library/hh921938

    Read the article

  • New Version 3.1 Endeca Information Discovery Now Available

    - by Mike.Hallett(at)Oracle-BI&EPM
    Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Business User Self-Service Data Mash-up Analysis and Discovery integrated with OBI11g and Hadoop Oracle Endeca Information Discovery 3.1 (OEID) is a major release that incorporates significant new self-service discovery capabilities for business users, including agile data mashup, extended support for unstructured analytics, and an even tighter integration with Oracle BI.  · Self-Service Data Mashup and Discovery Dashboards: business users can combine information from multiple sources, including their own up-loaded spreadsheets, to conduct analysis on the complete set.  Creating discovery dashboards has been made even easier by intuitive drag-and drop layouts and wizard-based configuration.  Business users can now build new discovery applications in minutes, without depending on IT. · Enhanced Integration with Oracle BI: OEID 3.1 enhances its’ native integration with Oracle Business Intelligence Foundation. Business users can now incorporate information from trusted BI warehouses, leveraging dimensions and attributes defined in Oracle’s Common Enterprise Information Model, but evolve them based on the varying day-to-day demands and requirements that they personally manage. · Deep Unstructured Analysis: business users can gain new insights from a wide variety of enterprise and public sources, helping companies to build an actionable Big Data strategy.  With OEID’s long-standing differentiation in correlating unstructured information with structured data, business users can now perform their own text mining to identify hidden concepts, without having to request support from IT. They can augment these insights with best in class keyword search and pattern matching, all in the context of rich, interactive visualizations and analytic summaries. · Enterprise-Class Self-Service Discovery:  OEID 3.1 enables IT to provide a powerful self-service platform to the business as part of a broader Business Analytics strategy, preserving the value of existing investments in data quality, governance, and security.  Business users can take advantage of IT-curated information to drive discovery across high volumes and varieties of data, and share insights with colleagues at a moment’s notice. · Harvest Content from the Web with the Endeca Web Acquisition Toolkit:  Oracle now provides best-of-breed data access to website content through the Oracle Endeca Web Acquisition Toolkit.  This provides an agile, graphical interface for developers to rapidly access and integrate any information exposed through a web front-end.  Organizations can now cost-effectively include content from consumer sites, industry forums, government or supplier portals, cloud applications, and myriad other web sources as part of their overall strategy for data discovery and unstructured analytics. For more information: OEID 3.1 OTN Software and Documentation Download And Endeca available for download on Software Delivery Cloud (eDelivery) New OEID 3.1 Videos on YouTube Oracle.com Endeca Site /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

    Read the article

  • Inside Red Gate - Exercising Externally

    - by simonc
    Over the next few weeks, we'll be performing experiments on SmartAssembly to confirm or refute various hypotheses we have about how people use the product, what is stopping them from using it to its full extent, and what we can change to make it more useful and easier to use. Some of these experiments can be done within the team, some within Red Gate, and some need to be done on external users. External testing Some external testing can be done by standard usability tests and surveys, however, there are some hypotheses that can only be tested by building a version of SmartAssembly with some things in the UI or implementation changed. We'll then be able to look at how the experimental build is used compared to the 'mainline' build, which forms our baseline or control group, and use this data to confirm or refute the relevant hypotheses. However, there are several issues we need to consider before running experiments using separate builds: Ideally, the user wouldn't know they're running an experimental SmartAssembly. We don't want users to use the experimental build like it's an experimental build, we want them to use it like it's the real mainline build. Only then will we get valid, useful, and informative data concerning our hypotheses. There's no point running the experiments if we can't find out what happens after the download. To confirm or refute some of our hypotheses, we need to find out how the tool is used once it is installed. Fortunately, we've applied feature usage reporting to the SmartAssembly codebase itself to provide us with that information. Of course, this then makes the experimental data conditional on the user agreeing to send that data back to us in the first place. Unfortunately, even though this does limit the amount of useful data we'll be getting back, and possibly skew the data, there's not much we can do about this; we don't collect feature usage data without the user's consent. Looks like we'll simply have to live with this. What if the user tries to buy the experiment? This is something that isn't really covered by the Lean Startup book; how do you support users who give you money for an experiment? If the experiment is a new feature, and the user buys a license for SmartAssembly based on that feature, then what do we do if we later decide to pivot & scrap that feature? We've either got to spend time and money bringing that feature up to production quality and into the mainline anyway, or we've got disgruntled customers. Either way is bad. Again, there's not really any good solution to this. Similarly, what if we've removed some features for an experiment and a potential new user downloads the experimental build? (As I said above, there's no indication the build is an experimental build, as we want to see what users really do with it). The crucial feature they need is missing, causing a bad trial experience, a lost potential customer, and a lost chance to help the customer with their problem. Again, this is something not really covered by the Lean Startup book, and something that doesn't have a good solution. So, some tricky issues there, not all of them with nice easy answers. Turns out the practicalities of running Lean Startup experiments are more complicated than they first seem! Cross posted from Simple Talk.

    Read the article

  • 4 Key Ingredients for the Cloud

    - by Kellsey Ruppel
    It's a short week here with the US Thanksgiving Holiday. So, before we put on our stretch pants and get ready to belly up to the dinner table for turkey, stuffing and mashed potatoes, let's spend a little time this week talking about the Cloud (kind of like the feathery whipped goodness that tops the infamous Thanksgiving pumpkin pie!) But before we dive into the Cloud, let's do a side by side comparison of the key ingredients for each. Cloud Whipped Cream  Application Integration  1 cup heavy cream  Security  1/4 cup sugar  Virtual I/O  1 teaspoon vanilla  Storage  Chilled Bowl It’s no secret that millions of people are connected to the Internet. And it also probably doesn’t come as a surprise that a lot of those people are connected on social networking sites.  Social networks have become an excellent platform for sharing and communication that reflects real world relationships and they play a major part in the everyday lives of many people. Facebook, Twitter, Pinterest, LinkedIn, Google+ and hundreds of others have transformed the way we interact and communicate with one another.Social networks are becoming more than just an online gathering of friends. They are becoming a destination for ideation, e-commerce, and marketing. But it doesn’t just stop there. Some organizations are utilizing social networks internally, integrated with their business applications and processes and the possibility of social media and cloud integration is compelling. Forrester alone estimates enterprise cloud computing to grow to over $240 billion by 2020. It’s hard to find any current IT project today that is NOT considering cloud-based deployments. Security and quality of service concerns are no longer at the forefront; rather, it’s about focusing on the right mix of capabilities for the business. Cloud vs. On-Premise? Policies & governance models? Social in the cloud? Cloud’s increasing sophistication, security in applications, mobility, transaction processing and social capabilities make it an attractive way to manage information. And Oracle offers all of this through the Oracle Cloud and Oracle Social Network. Oracle Social Network is a secure private network that provides a broad range of social tools designed to capture and preserve information flowing between people, enterprise applications, and business processes. By connecting you with your most critical applications, Oracle Social Network provides contextual, real-time communication within and across enterprises. With Oracle Social Network, you and your teams have the tools you need to collaborate quickly and efficiently, while leveraging the organization’s collective expertise to make informed decisions and drive business forward. Oracle Social Network is available as part of a portfolio of application and platform services within the Oracle Cloud. Oracle Cloud offers self-service business applications delivered on an integrated development and deployment platform with tools to rapidly extend and create new services. Oracle Social Network is pre-integrated with the Fusion CRM Cloud Service and the Fusion HCM Cloud Service within the Oracle Cloud. If you are looking for something to watch as you veg on the couch in a post-turkey dinner hangover, you might consider watching these how-to videos! And yes, it is perfectly ok to have that 2nd piece of pie

    Read the article

  • Creating a Corporate Data Hub

    - by BuckWoody
    The Windows Azure Marketplace has a rich assortment of data and software offerings for you to use – a type of Software as a Service (SaaS) for IT workers, not necessarily for end-users. Among those offerings is the “Data Hub” – a  codename for a project that ironically actually does what the codename says. In many of our organizations, we have multiple data quality issues. Finding data is one problem, but finding it just once is often a bigger problem. Lots of departments and even individuals have stored the same data more than once, and in some cases, made changes to one of the copies. It’s difficult to know which location or version of the data is authoritative. Then there’s the problem of accessing the data. It’s fairly straightforward to publish a database, share or other location internally to store the data. But then you have to figure out who owns it, how it is controlled, and pass out the various connection strings to those who want to use it. And then you need to figure out how to let folks access the internal data externally – bringing up all kinds of security issues. Finally, in many cases our user community wants us to combine data from the internally sources with external data, bringing up the security, strings, and exploration features up all over again. Enter the Data Hub. This is an online offering, where you assign an administrator and data stewards. You import the data into the service, and it’s available to you - and only you and your organization if you wish. The basic steps for this service are to set up the portal for your company, assign administrators and permissions, and then you assign data areas and import data into them. From there you make them discoverable, and then you have multiple options that you or your users can access that data. You’re then able, if you wish, to combine that data with other data in one location. So how does all that work? What about security? Is it really that easy? And can you really move the data definition off to the Subject Matter Experts (SME’s) that know the particular data stack better than the IT team does? Well, nothing good is easy – but using the Data Hub is actually pretty simple. I’ll give you a link in a moment where you can sign up and try this yourself. Once you sign up, you assign an administrator. From there you’ll create data areas, and then use a simple interface to bring the data in. All of this is done in a portal interface – nothing to install, configure, update or manage. After the data is entered in, and you’ve assigned meta-data to describe it, your users have multiple options to access it. They can simply use the portal – which actually has powerful visualizations you can use on any platform, even mobile phones or tablets.     Your users can also hit the data with Excel – which gives them ultimate flexibility for display, all while using an authoritative, single reference for the data. Since the service is online, they can do this wherever they are – given the proper authentication and permissions. You can also hit the service with simple API calls, like this one from C#: http://msdn.microsoft.com/en-us/library/hh921924  You can make HTTP calls instead of code, and the data can even be exposed as an OData Feed. As you can see, there are a lot of options. You can check out the offering here: http://www.microsoft.com/en-us/sqlazurelabs/labs/data-hub.aspx and you can read the documentation here: http://msdn.microsoft.com/en-us/library/hh921938

    Read the article

  • The Minimalist Approach to Content Governance - Request Phase

    - by Kellsey Ruppel
    Originally posted by John Brunswick. For each project, regardless of size, it is critical to understand the required ownership, business purpose, prerequisite education / resources needed to execute and success criteria around it. Without doing this, there is no way to get a handle on the content life-cyle, resulting in a mass of orphaned material. This lowers the quality of end user experiences.     The good news is that by using a simple process in this request phase - we will not have to revisit this phase unless something drastic changes in the project. For each of the elements mentioned above in this stage, the why, how (technically focused) and impact are outlined with the intent of providing the most value to a small team. 1. Ownership Why - Without ownership information it will not be possible to track and manage any of the content and take advantage of many features of enterprise content management technology. To hedge against this, we need to ensure that both a individual and their group or department within the organization are associated with the content. How - Apply metadata that indicates the owner and department or group that has responsibility for the content. Impact - It is possible to keep the content system optimized by running native reports against the meta-data and acting on them based on what has been outlined for success criteria. This will maximize end user experience, as content will be faster to locate and more relevant to the user by virtue of working through a smaller collection. 2. Business Purpose Why - This simple step will weed out requests that have tepid justification, as users will most likely not spend the effort to request resources if they do not have a real need. How - Use a simple online form to collect and workflow the request to management native to the content system. Impact - Minimizes the amount user generated content that is of low value to the organization. 3. Prerequisite Education Resources Needed Why - If a project cannot be properly staffed the probability of its success is going to be low. By outlining the resources needed - in both skill set and duration - it will cause the requesting party to think critically about the commitment needed to complete their project and what gap must be closed with regard to education of those resources. How - In the simple request form outlined above, resources and a commitment to fulfilling any needed education should be included with a brief acceptance clause that outlines the requesting party's commitment. Impact - This stage acts as a formal commitment to ensuring that resources are able to execute on the vision for the project. 4. Success Criteria Why - Similar to the business purpose, this is a key element in helping to determine if the project and its respective content should continue to exist if it does not meet its intended goal. How - Set a review point for the project content that will check the progress against the originally outlined success criteria and then determine the fate of the content. This can even include logic that will tell the content system to remove items that have not been opened by any users in X amount of time. Impact - This ensures that projects and their contents do not live past their useful lifespans. Just as with orphaned content, non-relevant information will slow user's access to relevant materials for the jobs. Request Phase Summary With a simple form that outlines the ownership of a project and its content, business purpose, education and resources, along with success criteria, we can ensure that an enterprise content management system will stay clean and relevant to end users - allowing it to deliver the most value possible. The key here is to make it straightforward to make the request and let the content management technology manage as much as possible through metadata, retention policies and workflow. Doing these basic steps will allow project content to get off to a great start in the enterprise! Stay tuned for the next installment - the "Create Phase" - covering security access and workflow involved in content creation, enabling a practical layer of governance over our enterprise content repository.

    Read the article

  • Ask the Readers: How Many Monitors Do You Use with Your Computer?

    - by Asian Angel
    Most people have a single monitor for their computers, many have two, and some individuals enjoy “3 monitor plus” goodness. This week we would like to know how many monitors you use with your computer. Photo by DamnedNice. A good majority of people have a single monitor that they use with their computers and that single monitor serves their needs very well. It could be that these individuals do not engage in a heavy amount of work or play on their computers…they just need to do the basics like checking e-mail, using I.M., working with photos, etc. Another possibility is the use of virtual desktop software such as Dexpot, Yodm 3D, or Sysinternals Desktops on Windows systems. Linux systems such as Ubuntu already have that wonderful multi-desktop functionality built in. The wonderful part about virtual desktops is that a single monitor can feel equivalent to a small army of monitors. The ability to separate your open windows into “categories” and spread them out across multiple desktops is definitely nice. With each passing year dual monitor setups are becoming more common. Having twice the screen real-estate visible at the same time can be extremely convenient when you are multi-tasking. Perhaps you like to monitor your system’s stats and an e-mail account on the second monitor while working with software on the first. It certainly beats having windows popping up and down on your screen constantly while keeping on top of everything! Next we have the people who have three or more monitors in use with their computers. This may be a result of the type of work they do, an experiment to see if multiple monitors are right for them, or the cool, geeky factor that comes with having all those monitors. Needless to say these individuals can induce a good amount of envy and/or inspiration in the rest of us when we see their awesome setups. Are you perfectly content with a single monitor? Do you have two or more monitors that you use? If you have two or more monitors are they actually that useful to you? Perhaps you are getting ready even now to add additional monitors to your system. Whatever your situation may be at the moment, let us know your thoughts (and possible multi-monitor plans) in the comments! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Hidden Tracks Your Stolen Mac; Free Until End of January Why the Other Checkout Line Always Moves Faster World of Warcraft Theme for Windows 7 Ubuntu Font Family Now Available for Download Oh No! WikiLeaks Published Santa Claus’s Naughty List [Video] Remember the Milk Now Supports HTTPS Encryption for the Entire Session

    Read the article

  • EMEA Analytics & Data Integration Oracle Partner Forum

    - by milomir.vojvodic
    MONDAY 12TH NOVEMBER, 2012 IN LONDON (UK) For Oracle Partners across Europe, Middle East and Africa: come to hear the latest news from Oracle OpenWorld about Oracle BI & Data Integration, and propel your business growth as an Oracle partner. This event should appeal to BI or Data Integration specialized partners, Executives, Sales, Pre-sales and Solution architects: with a choice of participation in the plenary day and then a set of special interest (technical) sessions. The follow on breakout sessions from the 13th November provide deeper dives and technical training for those of you who wish to stay for more detailed and hands-on workshops. Keynote: Andrew Sutherland, SVP Oracle Technology Hot agenda items will include: The Fusion Middleware Stack: Engineered to work together A complete Analytics and Data Integration Solution Architecture: Big Data and Little Data combined In-Memory Analytics for Extreme Insight Latest Product Development Roadmap for Data Integration and Analytics Venue: Oracles London CITY Moorgate Offices Places are limited, Register from this Link Note: Registration for the conference and the deeper dives and technical training is free of charge to OPN member Partners, but you will be responsible for your own travel and hotel expenses. Event Schedule During this event you can learn about partner success stories, participate in an array of break-out sessions, exchange information with other partners and enjoy a vibrant panel discussion. Nov. 12th  : Day 1 Main Plenary Session : Full day, starting 10.30 am.  Oracle Hosted Dinner in the Evening Nov. 13th  onwards Architecture Masterclass : IM Reference Architecture – Big Data and Little Data combined (1 day) BI-Apps Bootcamp  (4-days) Oracle GoldenGate workshop (1 day) Oracle Data Integrator and Oracle Enterprise Data Quality workshop (1 day) For further information and detail download the Agenda (pdf) or contact Michael Hallett at [email protected] and Milomir Vojvodic at [email protected] v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >