Search Results

Search found 5262 results on 211 pages for 'at commands'.

Page 114/211 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• App to slice'n'dice video, specifically remove chunks, on a Mac?

  - by Phillip Oldham

  I have a couple of collections of DVD Box-Sets I've ripped to my mac. Now I'd like to sweeten the viewing experience by removing the title sequences and credits so that viewing doesn't mean I have to keep reaching for the remote to skip 30 seconds of annoying music (think watching multiple episodes of Family Guy). If I can find an app that will let me do this reasonably quickly manually that would be great, but it would be perfect if I could dump a load of commands into a file and have everything trimmed while the mac is "inactive". I'm thinking that if I can specify chunks of time to remove from the original file that would be perfect. I had a quick look at importing into iMovie to do it manually and gave up at the "Processing Thumbnails" stage as it said it would be a couple of hours to produce them for a 45min mp4 file, which I can understand at 25fps but I'm not willing to wait, especially when I've got over a week's worth of files. Any suggestions?

  Read the article

• monitoring TCP/IP performance on Solaris

  - by Andy Faibishenko

  I am trying to tune a high message traffic system running on Solaris. The architecture is a large number (600) of clients which connect via TCP to a big Solaris server and then send/receive relatively small messages (.5 to 1K payload) at high rates. The goal is to minimize the latency of each message processed. I suspect that the TCP stack of the server is getting overwhelmed by all the traffic. What are some commands/metrics that I can use to confirm this, and in case this is true, what is the best way to alleviate this bottleneck?

  Read the article

• Debian/Ubuntu apt or pbuilder without root privileges?

  - by Tem Pora

  I want to use apt or pbuilder to build a package in user's home directory. The home directory has enough space to hold the package's source, its dependencies and binary output. But the apt and pbuilder documents say that you have to be a root user (sudo) to use it. It's frustrating, as the only way now I have at my disposal is to build the package from source or use the dumba$$ (sorry for bad language) dpkg and in both cases figure out every dependency manually, create the dir layout manually and install the built things manually. Now if I can do all these things manually, why the tool writers (apt) think that doing so using their tool (apt) is somehow more special/dangerous? I don't want to use root privileges JUST to build and test a user-land package. If I am NOT allowed to do anything outside my home dir then why NOT the apt or pbuilder type commands be allowed to "build" something in my home dir without root privileges? I just want to use their functionality. It seems there is nothing like Gentoo Prefix from Debian

  Read the article

• Am I using too much memory? (Rails on EC2 with Resque)

  - by Stpn

  I am looking at the memory usage of the Rails application (it uses background processes via Resque) and since the common answer to the question, "how many workers is too many" was "test and see", I ran some memory commands and wonder if someone can help figuring if the memory usage is high enough already, or I can still add some extra workers.. so (this is all under the maximum load): $ free -t -m total used free shared buffers cached Mem: 1756 1532 223 0 12 229 -/+ buffers/cache: 1291 464 Swap: 895 10 885 Total: 2652 1543 1108 $ vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 10588 156172 13400 326476 1 6 4 0 5 4 1 0 99 0 If there is any extra info I can provide to help answer this, I would be happy to do so. If the question is strange in some way, please let me know I'd be glad to fix etc..

  Read the article

• In Outlook 2010, can you add "Categories" to the "New Email" Ribbon?

  - by Jeff

  I couldn't figure out how to do this in Outlook 2007, and I was hoping I could do it in Outlook 2010... I want the ability to quickly apply a category when composing a new email (typically a "Waiting For..." category) for things that need a response. It is possible to apply a category by clicking the "Options" ribbon, then the little arrow under the More Options section - but why can't I get the nice big "Categories" drop-down that's available in the "Tags" section of the main Outlook window. There are about a kabillion commands in the "Customize Ribbon" dialog box for the New Mail window, but I couldn't find anything about Categories. Should I just give up?

  Read the article

• How to execute a command on multiple hosts using IPv6 only?

  - by math

  First of all there is pdsh which is essentially a parallel distributed shell which may execute commands on a list of given hosts. However, I find myself in an IPv6 only problem setting. It seems that pdsh is not able to use IPv6, as I am getting error messages: pdsh -w ^hostnames my_command pdsh@myhost: gethostbyname("foobar") failed I also tried to use IPv6 addresses only, which also didn't work. So how do you run a single shell script for administrative purpose (no SGE stuff, or similar) on a bunch of hosts that is IPv6 reachable only?

  Read the article

• Why would anacron not be running?

  - by Rory

  I have a Ubuntu system that has anacron installed. However I'm pretty sure it's not running. It's not running the commands in /etc/cron.daily to rotate the syslog files (I'm using sysklog, which has its own rotating log method, not using logrotate). The last time the logs were rotated were in October 2009. /var/spool/anacron/cron.daily exists and the contents are 20091015. AFAIR we had a power outage then, and everything rebooted. How can I debug anacron? How can I see why it's not running? My first instinct is to look for /var/log/anacron, but that's not there. How can I fix it to make it run again?

  Read the article

• Can't pipe echo to netcat?

  - by user1641300

  I have the following command: echo 'HTTP/1.1 200 OK\r\n' | nc -l -p 8000 -c and when I curl localhost:8000 I am not seeing HTTP/1.1 200 .. being printed. I am on mac os x with netcat 0.7.1 Any ideas? #!/bin/bash trap 'my_exit; exit' SIGINT SIGQUIT my_exit() { echo "you hit Ctrl-C/Ctrl-\, now exiting.." # cleanup commands here if any } if test $# -eq 0 ; then echo "Usage: $0 PORT" echo "" exit 1 fi while true do echo "HTTP/1.1 200 OK\r\n" | nc -l -p ${1} -c done and testing with: curl localhost:8000

  Read the article

• Per process I/O accounting on AIX

  - by ipozgaj

  Is there a way of getting per process I/O statistics on AIX, i.e. to get current disk I/O rate of a process? Commands like iostat, nmon, topas etc. can't display such data. Filemon also doesn't help. Actually, what I would need is something much like iotop(1) command on Linux. Update: it seems there is no builtin command(s) to do this. I will most probably make my own by using the SPMI API.

  Read the article

• Access denied errors in windows server 2008 for system administrator

  - by NLV

  Hello I've a HP Pavilion DV4 with windows Server 2008 R2 enterprise. My system is connected to a domain. I login using my domain account. I am the administrator for the local machine. But I'm getting access denied everywhere (file system, running commands, using visual studio..literally everywhere..) in my machine. What could be the problem? Any ideas? Please tell me if you need more information as I'm just a developer with less knowledge in system administration.

  Read the article

• How to make a non-root user to use chown for any user group files?

  - by user1877716

  I would like to make a user super powerful, with almost all root rights but unable to touch a the root user (to change the password of the root). My goal is to user "B" to manage my web server. The problem is user B need to able to run the chown and chmod commands on some files belonging to other users. I tried to put B in root group or use visudo, but it's not enough. I'm working an Centos 6 system. If some body have ideas!

  Read the article

• how can I get back /usr/local/bin/mysql on Snow Leopard?

  - by Ole Media

  From terminal and trying to uninstall macports, I ran a command, rm -rf / macports...., that erased bunch of stuff. I feel ashamed about this, not realizing the space after /. Since then, mysql is running but I cannot execute any of the mysql commands because it is not under /usr/local/bin/ I went ahead an reinstall mysql but without luck. What steps do you recommend on doing in order to be able to run mysql, mysqlduml, mysqladmin, from terminal? I can access databases from phpmyadmin, so mysql is running, don't ask me how.

  Read the article

• Icon on user account desktop before the user has logged in.

  - by JHamill

  Currently working on a Windows 7 deployment project and I have a requirement to place an RDP icon on a specific users desktop, lets call this user 'Guest'. The image itself will be completely vanilla and all user accounts will be created using commands in the Unattend file. The 'Guest' account will not be a local admin and so it will not be the account used for autologon during the application of the unattend file. As a result of this, the 'Guest' profile will not have been created so I'm unable to simply place the icon at C:\Users\Guest\Desktop. Is there a way to place an icon on this specific users desktop prior to logging in with it? I know there are ways around this i.e. include this account in the base image and log in with it in order to create the profile but I'd like to keep the base image as vanilla as possible. Any ideas or pointers would be greatly appreciated. Thanks in advance.

  Read the article

• oracle virtualbox doesn't work for host Kubuntu since Lucid Lynx 10.04

  - by 13east

  I have a thinkpad edge 14 core i3 2.4 ghz and 4g ram; I have tried kubuntu 10.04, 10.10, 11.10, 12.04 and 12.10 (all x64 architecture); Both oracle and ose virtualbox only works properly to install XP and windows 7 quest system on kubuntu 10.04; For every other kubuntu release since, the guest installation goes as far as formatting the virtual drive, freezes at this step, and doesn't even go as far as copying files to hard-drive to begin installation. But virtualbox has not stopped responding to commands; I can kill that one specific window with the problem installation ("machine" - "close" - "power off the machine") and start over again without having to force-kill virtualbox application. If anyone knows how I can go about addressing this problem, any help you can provide would be very much appreciated. Thank You.

  Read the article

• Issues with hard disk secure erase

  - by John Watson

  I want to completely wipe all the data and both OSes (Ubuntu and Windows 7) from my hard drive. I tried DBAN but it gives me an error and does not run. I am looking for an alternative. After reading some articles online, I came to know that, using a Linux live CD, it can be done using either of following commands. a) sudo dd if=/dev/zero of=/dev/sda b) sudo shred -vfz -n 1 /dev/sda My questions are 1) Which option (a or b) is more secure (wipes everything) and faster? 2) Does either of the options damage the hard drive or anything? I want to use hard drive again i.e. installing Windows and Ubuntu again.

  Read the article

• Ping6 fail on linux

  - by michelemarcon

  I have 2 linux box configured with IPv4. I have tried adding IPv6 to them. I have issued this commands on box1: ip -6 addr add fd32:2d7f:f3c1::1/48 dev eth0 And I get this: inet6 addr: fd32:2d7f:f3c1::1/48 Scope:Global Then I have issued this command on box2: ip -6 addr add fd32:2d7f:f3c2::1/48 dev eth0 Back on box1 (command/response): ping6 fd32:2d7f:f3c1::1 is alive! ping6 fd32:2d7f:f3c2::1 ping6: sendto: Network is unreachable Why doesn't box1 ping box2 (of course, also box2 can't ping box1)?

  Read the article

• Converting Powerpoint to PDF solutions?

  - by OWiz

  I asked a version of this question earlier, but I'm in need of other solutions, so this is a more pointed question. I'm in need of a server-based solution for converting ppt files to pdf files. This solution can either sit on the current web server as a console command-triggered service, it can be integrated into the C# code of the web all, or it can be it's own server. It also can't be based off of Libreoffice or Openoffice, as those two have problems converting SmartArt. I'm currently using Libreoffice. I've tried Powerpoint console commands combined with a PDF driver but I can't get that to work from C#. I've tried a .vbs script, but that briefly opens the powerpoint window.

  Read the article

• SharePoint (2010) - Can't delete Service Application

  - by Chris W

  The search service application in our farm went bonkers complaining that it couldn't connect to itself. After multiple people fiddling to try and fix it we've ended up with two search application. The new one, which is working perfectly, and the original one which is very unhappy. I've tried deleting the original Search App in Central Admin but it just won't go - it sits on the screen saying "Processing" but it never completes regardless of how long it is left. There's lot's happening in the logs but I can't really decipher exactly why this isn't working. Things are working fine within the farm but I'd ideally like to clean up this old application if possible. Are there any other options like deleting it with stsadm? I've had a dig but can't seem to find the commands to enumerate the service applications and then delete the correct one.

  Read the article

• linking Office 365 and ADFS on Azure

  - by Gaurav

  i am trying to link my ADFS to Office 365 in order to set up Single Sign On for Office 365. I am going over this blog post. at Step 5, i am supposed to run Powershell commands so i can connect the ADFS to Office 365. Set-MsolAdfscontext -Computer <AD FS server FQDN> Convert-MsolDomainToFederated -DomainName <domain name> i am unable to determine the FQDN for the ADFS server. i searched around a lot on the web, but was not able to locate the solution. i am just getting started with all configuration of ADFS and Office 365, but was not able to find out a solution. any answers?

  Read the article

• Why does MOVE command in DOS treat wildcard patterns oddly in this case?

  - by Adisak

  I am using the "move" command with a wildcard pattern in the CMD prompt under Windows 7. In my source directory, I have the following files: movie1.avi movie1.avi_metadata movie2.avi movie2.avi_metadata If I type the command move source\*.avi dest it will move all four files even though I would expect it to only move the two *.avi files and not the *.avi_metadata files. As expected, move source\*.a dest and move source\*.av dest don't move any files. However when the length of the extension for the wildcard pattern is 3 characters, it will move all extensions that begin with those first three characters. Is this a bug in the "move" command or expected behavior and is it documented anywhere? Edit: John Watts notes that this is probably do to "short" filenames. Is it possible then to make commands in the CMD interpreter only operate on long filenames and to ignore short filenames?

  Read the article

• Using sudo /etc/init.d/httpd start complains for log file rights

  - by SCO

  I created a custom log directory with the root account, and chmoded it to 777 teporarily. ls -la /var/mylogs/log/ total 16 drwxrwxrwx 2 root root 4096 Jun 24 06:27 . drwxr-xr-x 5 root root 4096 Jun 24 06:25 .. When I try to start the service from a user (lets say "myuser", which is in the sudoers files as myuser ALL=(ALL) ALL), it fails because of the permissions : sudo /etc/init.d/httpd start Starting httpd: (13)Permission denied: httpd: could not open error log file /var/mylogs/log/httpd_error.log. Unable to open logs However, the following is successfull : sudo bash /etc/init.d/http start So I guess these two methods are not equivalent, although to me doing sudo was the same than logging into the root account and issuing the commands. Any clue ? Thank you !

  Read the article

• Config deployment on multiple servers.

  - by user66601

  I have multiple servers in WEB cluster (identical configuration for all of them, despite the IP) How do you deploy changes in configs on multile servers? I make the new config, then create config per every server (placing correct IP), and next: upload them on every server, replacing old ones (rsync over ssh) set on every server a job which reloads webserver at the same time (servers use ntp). - this done by issuing commands by script (to save time for logging in) before adding a job for server reload - there's checksum test of the config on the server) - an a notification in case of fail How do you see such method? What should be the "professional way :) ? (I don't say my way doesn't work... it works and saves my time not used for logging on every webserver.) Regards,

  Read the article

• How to restrict ssh port forwarding, without denying it?

  - by Kaz

  Suppose I have created an account whose login shell is actually a script which does not permit an interactive login, and only allows a very limited, specific set of commands to be remotely executed. Nevertheless, ssh allows the user of this account to forward ports, which is a hole. Now, the twist is that I actually want that account to set up a specific port forwarding configuration when the ssh session is established. But it must be impossible configure arbitrary port forwarding. (It is an acceptable solution if the permitted port forwarding configuration is unconditionally established as part of the every session.)

  Read the article

• EXEC() syntax error using ODBC

  - by Mike Trader

  I have written a little ETL application that I wish to run a few lines of TSQL from. If i enter a simple query like "SELECT * FROM MyTable" everything is fine. All single line commands run as expected. A multiline query like this is also fine: DECLARE @TableName NVARCHAR(MAX) set @TableName = 'MyTable' EXECute ( 'DROP TABLE '+ @TableName ) Howevery when I try and run: DECLARE @TableName NVARCHAR(MAX) OPEN Tables FETCH NEXT FROM Tables INTO @TableName WHILE @@FETCH_STATUS = 0 BEGIN EXEC( 'DROP TABLE ' + @TableName ) FETCH NEXT FROM Tables INTO @TableName END I get a syntax error after TABLE in the EXEC() call. I have spent 6 hours trying to figure this out thinking perhaps I need to escape the single quote or something. I just cannot see the problem. A set of fresh eyes would be appreciated.

  Read the article

• Why does deleting from the command line take significantly less time than from a GUI?

  - by Jordan Plahn

  So this is probably the dumbest question you'll read today, but it's something I just wondered about as I was deleting a dozen or so images from my computer. With a quick rm -rf command on the directory's contents, all the images were gone in a snap. When I drag the same dozen or so images to a trash can/recycle ban, it takes sometimes 10 seconds or more. Now I'm sure some of it comes from the overhead of the GUI and such, and some of it may be the fact that the file still "exists" in some form if it's put into the recycle bin, but is there anything else that accounts for such a huge time disparity? Are "rm" and "delete" just such fundamentally different commands so I'm trying to compare apples and oranges? Enlighten me, please!

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >