Search Results

Search found 16940 results on 678 pages for 'disk drive'.

Page 114/678 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• Cannot Install Bootcamp on Mac Fusion Drive

  - by user3377019

  I have two drive installed in my mid-2013 Macbook pro. It is running osx maverick. I set the two drives (an ssd and a regular HD) up using the fusion drive (following the diy fusion drive guides out there). I went ahead and created a 40gb partition to host my windows install. I removed the SSD, installed windows, then reinstalled the SSD. As soon as the ssd was placed back in the bootcamp partition stopped booting. I get a blinking cursor on a black screen. I checked out the partition info in disk utility and it appears that the windows partition is not marked bootable. Below is some info I managed to gather. I am wondering if there is a way to fix the partition table so my bootcamp will boot. /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *120.0 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage 119.7 GB disk0s2 3: Apple_Boot Boot OS X 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Microsoft Basic Data BOOTCAMP 40.0 GB disk1s2 3: Apple_CoreStorage 459.2 GB disk1s3 4: Apple_Boot Boot OS X 650.0 MB disk1s4 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Macintosh HD *573.4 GB disk2 Name : BOOTCAMP Type : Partition Disk Identifier : disk1s2 Mount Point : /Volumes/BOOTCAMP File System : Windows NT File System (NTFS) Connection Bus : SATA Device Tree : IODeviceTree:/PCI0@0/SATA@1F,2/PRT1@1/PMP@0 Writable : No Universal Unique Identifier : 584BAED6-4C46-4F18-93B3-957F6E27003C Capacity : 40 GB (39,998,980,096 Bytes) Free Space : 16.34 GB (16,339,972,096 Bytes) Used : 23.66 GB (23,659,003,904 Bytes) Number of Files : 86,424 Number of Folders : 0 Owners Enabled : No Can Turn Owners Off : No Can Be Formatted : No Bootable : No Supports Journaling : No Journaled : No Disk Number : 1 Partition Number : 2

  Read the article

• NTBackup Error: C: is not a valid drive

  - by Chris

  I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Microsoft Office 2003 applications crash on 'Save As' to a network mapped drive

  - by Archit Baweja

  Hey guys, so I'm not sure if it belongs on ServerFault forums so figured I'd ask here first because its a workstation/client side issue. I have a client where we have windows server 2003 setup, with windows xp professional setup on all the workstations. We've setup a 'domain' and all workstations logon to the domain (authenticated by the Windows Domain Controller), and in the logon script we map drives on to each workstation. Everything is working peachy except for one workstation, where when I open a file in excel from a mapped drive, it opens fine, but when I go to hit Save As, the Save As dialog pops and hangs up. I cannot perform any other action in excel. When I try cancel the Save As dialog, excel crashes. The mapped drive opens up fine in Windows Explorer. To further investigate this issue, I created a new blank text document on the network drive in Windows Explorer. I then opened it. Then hit save as, and the Save As dialog opened up fine and it would let me save the document. I repeated the above steps for a word document. However this time the Save As dialog hung/froze again. So I'd imagine its a Microsoft Office Issue. Any ideas?

  Read the article

• Drive Mapped On Amazon EC2 Instance Startup Disconnected After Logon

  - by jsn

  I am launching an Amazon EC2 instance (Windows Server 2012), and on startup (though User Data field), it runs this powershell script: <powershell> NET CONFIG SERVER /AUTODISCONNECT:-1 # clear all prior connections net use * /delete /y > C:\delLog.txt 2>&1 # mount new drive net use R: \\dbHost\share /user:username pass /persistent:yes > C:\useLog.txt 2>&1 ipconfig /all > C:\ipLog.txt </powershell> When it launches and I connect to it through RDP, it shows in explorer "Diconnected Network Drive (R:). If I double click it, error message displays "R:\ is not accesible. Access id denied". Normally, it would ask me for credentials to reconnect. I need for this drive to be connected through the duration of the instance. delLog.txt contents: You have these remote connections: T: \\dbHost\share Continuing will cancel the connections. The command completed successfully. useLog.txt contents: The command completed successfully. ipLog.txt contents as expected. The net use commands works fine by itself, it connects. Anyone have any idea what could be wrong? There is only one account on these machines - Administrator. It is a samba share to a Linux server on a private network.

  Read the article

• "Path Not Found" when attempting to write to a sub folder within a mapped drive

  - by Adam

  We have an interesting issue with one of our server shares, or possibly, our Win 7 desktops. When our users try to save files in a sub folder, either via copy/paste or through an application, to a mapped drive on our DC they receive an error saying "Path not found". They can however browse this folder and open files from it. This is where the "Path Not Found" error doesn't seem to stack up in my opinion. Users can however save files fine in the root folder of the mapped drive, it appears only to affect sub folders. It seems to be random which users and machines this affects. The users can log on to a different machine and be able to save in sub folders fine, on the same mapped drive. Event viewer hasn't been much help either. Currently, the only solution we have found is to image the machines affected which solves the issue. Our servers are Server 2008 R2 with Win 7 Pro desktops. Any help/pointers/suggestions would greatly be appreciated.

  Read the article

• XP Client for NFS failure dialog on startup, but drive mapping works

  - by Matt Bennett

  I'm mounting an NFS share to some windows machines using the tools that come in the Services for UNIX Administration toolkit. I've set up the User Name Mapping service to use local passwd and group files. I had to manually start the User Name Mapping service, and then created an 'advanced map' from the XP machine's user to a uid that exists in on my NFS server, like so: Windows User: Matt Bennett UNIX Domain: PCNFS UNIX User: mattbennett UID: 10250 Primary: * I can map a network drive without any issues, and it correctly identifies the UID and GID to use, but when I reboot I get this message: "An error occurred while connecting to the NFS server. Make sure that the Client for NFS service has started. If the problem persists make sure Client for NFS service can communicate with User Name Mapping or PCNFS server." After dismissing the dialog, the machine finishes booting and the network drive is there in My Computer with the title "Disconnected Network Drive", but I can open it I can see the network share without a problem, and then it drops the 'disconnected' from its title. It seems like the services are starting in the wrong order or something, so the first attempt to connect fails but subsequent ones work as expected. There don't seem to be any symptoms apart from the dialog box, but obviously something's not quite right. What have I done wrong? Thanks, Matt.

  Read the article

• NTBackup Error: C: is not a valid drive

  - by Chris

  I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Windows7 shows a drive as full in summary but files, including backup folder, shown on drive are ver

  - by Rob

  I have a drive partitioned so it is seen by Windows as 2 drives: C:\ and D:\ Windows7 shows D:\ as full up in the graphical summary in 'My Computer' summary of all the drives, e.g. the bar graph indicates full and nearly all of the drive's capacity, 108Gb, is full. So I go into the D:\ drive to look at the files, I see several folders. I select them all and the right click menu Properties to count their size, expecting the value to be about the same as what Windows reports in the summary, i.e. nearly 108Gb. But the properties shows the files are very small, Kbs and Mbs, nowhere near 108Gbs. One of the folders is a backup, but its size is very small. I've checked the folder options to show all system files and hidden files too - and counted these in the properties. Something invisible is holding the space. What is happening here? I'm afraid to delete anything if it removes valuable backups. Have I got huge backups here? Why can't I see them? How do I see them?

  Read the article

• Sharing a folder with Nautilus and NTFS external drive gets errors

  - by TheLQ

  I am trying to share a folder in Lubuntu over a network that's on an external NTFS drive. Due to the system that I have (rotating backup disks) this is probably the second time that the drive would of been mounted. Its manually mounted with a simple (for example) mount /dev/sdb1 /media/BACKUP On an internal NTFS disk I have successfully setup a network share and can access it. However on the external disk I can't from any other Windows computer. When setting up the share Nautilus said that it needs to change the other's permissions to allow for other users to write. However afterwords its still blank. Changing it to Read and Write just changes back to blank. Chowning the entire /media folder recursively and trying didn't work. Running PCManFM as root and changing didn't work. Adding "public=yes" to smb.conf and restarting didn't work. I'm out of idea's on what to do. What's weird is that it worked just fine on an internal NTFS disk, so why not the external one? Any solutions need to be able to managed inside of a gui (preferably Nautilus) as the person managing the machine isn't as tech savvy. Thanks

  Read the article

• Windows 7 shows a drive as full in summary but files shown on drive are very small

  - by Rob

  I have a drive partitioned so it is seen by Windows as 2 drives: C:\ and D:\ Windows 7 shows D:\ as full up in the graphical summary in 'My Computer' summary of all the drives, e.g. the bar graph indicates full and nearly all of the drive's capacity, 108Gb, is full. So I go into the D:\ drive to look at the files, I see several folders. I select them all and the right-click menu Properties to count their size, expecting the value to be about the same as what Windows reports in the summary, i.e. nearly 108Gb. But the properties window shows the files are very small, Kbs and Mbs, nowhere near 108Gbs. One of the folders is a backup, but its size is very small. I've checked the folder options to show all system files and hidden files too - and counted these in the properties. Something invisible is holding the space. What is happening here? I'm afraid to delete anything if it removes valuable backups. Have I got huge backups here? Why can't I see them? How do I see them?

  Read the article

• Microsoft Office 2003 applications crash on 'Save As' to a network mapped drive

  - by Archit Baweja

  Hey guys, so I'm not sure if it belongs on ServerFault forums so figured I'd ask here first because its a workstation/client side issue. I have a client where we have windows server 2003 setup, with windows xp professional setup on all the workstations. We've setup a 'domain' and all workstations logon to the domain (authenticated by the Windows Domain Controller), and in the logon script we map drives on to each workstation. Everything is working peachy except for one workstation, where when I open a file in excel from a mapped drive, it opens fine, but when I go to hit Save As, the Save As dialog pops and hangs up. I cannot perform any other action in excel. When I try cancel the Save As dialog, excel crashes. The mapped drive opens up fine in Windows Explorer. To further investigate this issue, I created a new blank text document on the network drive in Windows Explorer. I then opened it. Then hit save as, and the Save As dialog opened up fine and it would let me save the document. I repeated the above steps for a word document. However this time the Save As dialog hung/froze again. So I'd imagine its a Microsoft Office Issue. Any ideas?

  Read the article

• Explorer.exe hangup during move large file into external drive

  - by PiotrK

  During move large files (700mb+) to external drive formated NTFS via USB 3.0 I've noticed strange things about explorer.exe (I am using Windows 7 up to date) Sometimes after move file the explorer get stuck (ie. it can happen after few files during move of several large files) - moving window freeze and I am unable to kill explorer (via taskmgr, or cmdline TASKKILL). In command line I've got something like this (taskmgr shows that explorer.exe is still running - I've got the same PID every time I try to kill it and no diagnostic message): C:\Windows\system32TASKKILL /F /IM explorer.exe SUKCES: proces "explorer.exe" o identyfikatorze PID 6296 zostal zakonczony. C:\Windows\system32TASKKILL /F /IM explorer.exe SUKCES: proces "explorer.exe" o identyfikatorze PID 6296 zostal zakonczony. If I try to run another explorer.exe process at this point, I got desktop icon and start bar back but I cannot open any explorer window After few minutes explorer.exe finally dies and I am able to rerun it without rebooting File that I moved have two copies - one local and one on the external drive (the original file wasn't delete after move); Both copies seems to contain the same data (same length and CRC info) If this happen during move of multiply files, only some files are moved and one of them have two copies (both locally and on the external drive) What can I do to fix those explorer hangs? Added: The same problem exist when copying files, it hangsup between large files Similar problem exist when I tried to use TotalCommander (x64): copying paused at 80% of one of files, TC didn't hung up (but clicking cancel in copying dialog box doesn't have any effect). During this pause I can't kill TotalCmd.exe just like Explorer.exe Added (2): This problem seems to disappear when I use 32 bit applications (like TotalCommander (x86) ), but I need to do more testing to be sure of this Added (3): There are several errors in event log, source: disk, id: 11, qualifiers: 49156, task: 0, level: 2, keywords: 0x80000000000000 (This may be important, and I forgot to mention this): Main disk is encrypted via Truecrypt (boot-in password)

  Read the article

• Ubuntu 12.04 partioning an external drive without lossing data

  - by Menelaos Perdikeas

  I have an Ubuntu 12.04 with an external 1.5T disk (just for data). It is /dev/sdc1 seen below: $ df -T Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/sda1 ext4 1451144932 27722584 1350794536 3% / udev devtmpfs 6199460 4 6199456 1% /dev tmpfs tmpfs 2482692 988 2481704 1% /run none tmpfs 5120 0 5120 0% /run/lock none tmpfs 6206724 284 6206440 1% /run/shm /dev/sdc1 fuseblk 1465135100 172507664 1292627436 12% /media/Elements The thing is I would like to implement this rsync-based backup strategy and I want to use my /dev/sdc1 external drive for that. Since the guide mentioned above recommends placing the backup directory in a separate partition I want to repartition the /dev/sdc1 external hard disk but retain existing data in a separate partition. E.g. split /dev/sdc1 into two partitions: (i) one to be used exclusively for the rsync-based backup and (ii) the other for the existing miscellaneous data. How should I go about partitioning with minimal risk to my existing data and what kind of filesystem do you recommend? I would prefer a console-based guide but unfortunately all the material I found on the web is oriented towards partitioning the main (bootable) disk and not an external fuseblk filesystem used only for passive data.

  Read the article

• Mapped network drive connection timeout

  - by Terix

  I have server "Alpha" and server "Beta". Server Beta has a shared folder, that is mapped on server Alpha as "X:" On server Alpha there is a .vbs script that runs and take some files on local drive and copy them on X: drive. My issue is if no user log on server Alpha for a long time, it seems like the tcp connection underneath the mapped drive has a timeout, and the vbs script fails on the copy of file. As soon I log with remote desktop on Alpha server, the .vbs is successfull on the copy of the files. I have made many tests, using file logs to check what was happening and I found no way to refresh the connection and let the .vbs be able to copy files unattended.. I have always to log with remote desktop on Alpha server to refresh the connection and let the .vbs copy the files without issues. What can I do to avoid to log every time? The .vbs script runs 3 times a day and is very annoying. I do not have control over server Beta so I cannot change anything there, and I am very limited on changes I can do on server Alpha ( I cannot change registry and that sort of things)

  Read the article

• Dual hard drive Windows 7 system, modified the registry to get programs to install on second drive, now IE doesn't work

  - by paul

  I have a dual hard drive Windows 7 system, Windows is installed on an SSD (C:) and I modified the registry to try to force programs to install on second HDD drive (another letter). The registry edits are pretty simple, just a few keys in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion to change the drive letter. For the most part the system is very fast and works great, but IE doesn't work anymore. With IE10, it opens for a flash with a white window then closes. I tried installed IE11 which opens a white window for a few seconds, doesn't respond, then crashes. I've tried all the solutions I could find. This includes resetting the IE settings, "uninstalling" and re-installing IE, which is just turning it on and off in "Turn Windows Features on or off", copying the Program Files\Internet Explorer files onto both/either drives, changing the registry keys back to use C:, lots of rebooting, and safe mode. Nothing has worked. I don't see errors in the event viewer, but I might not know what to look for. Any ideas on how to get IE running? I don't need IE for daily browsing, I just need it for cross-browser testing on sites I build and on the rare occasion a page only works in IE. I don't really want to use a virtual machine, but would be ok with something standalone like tredosoft's, but I'm not aware of something like that for current versions of IE.

  Read the article

• Backing up 80G hard drive 1G per day

  - by barrycarter

  I want to securely backup my 80G HD, but doing a complete backup takes forever and slows down my machine, so I want to backup just 1G per day. Details: % First hurdle: on the first day, I want to backup the "first" 1G of the hard drive. Of course, there really is no "first" 1G on a hard drive. % After 80 days, I'll have my whole HD backed up... assuming none of my files ever change, which of course they do. So the backup plan/program must also catch file creation/changes as they come along. % The backups must be consistent, in that I can restore my system by restoring the backups sequentially. In other words, "dd if=/harddrive" probably won't work. % The backups should encrypt file contents AND names, but I don't see this as a major hurdle. % Once the backup has backed up everything (even changed files), it can re-backup the first 1G on my hard drive. Even though this backup is redundant, that's OK, because I always want to be backing up something (eg, if I'm backing up to optical media, the older media might start going corrupt). Is there a magic backup plan/program that does this? In reality, I want to do this for multiple machines with multiple drives each, but think that solving the above will solve the general case.

  Read the article

• Formatting a former RAID 0 drive through USB

  - by EXC

  I'll try to be as specific as possible here: I was using two Hitachi 2.5" 500 gb HDDs in my Gateway P-7805u laptop in a RAID 0 configuration. The array was causing the laptop to run extremely hot, however, so I removed them and deleted the RAID array through Intel Matrix HDD manager. I did a clean install of Windows 7 on the original 320 gb HDD that came with the laptop. I never did format the original RAID array HDDs before taking them out of the computer. Now, I am attempting to format the Hitachi 500 gb RAID array HDDs externally through a USB external enclosure. The external HDD drivers install on my clean install OS, but when I go into 'My Computer' there is no external drive available. I cannot format in CMD Prompt because my computer will not designate a drive letter to the external HDD. The drivers install and the HDD is recognized as a Hitachi external drive, but nothing seems to show up in my computer window. I need to know if there is a way to format these drives to NTFS externally.

  Read the article

• Apache mod_disk_cache on a seperate drive

  - by pavs

  how can I set Apache mod_disk_cache on a separate drive from where the OS/Apache is installed? I have set up this on my apache2.conf: <IfModule mod_cache_disk.c> # cache cleaning is done by htcacheclean, which can be configured in # /etc/default/apache2 # # For further information, see the comments in that file, # /usr/share/doc/apache2/README.Debian, and the htcacheclean(8) # man page. # This path must be the same as the one in /etc/default/apache2 CacheRoot /media/cacheHD # This will also cache local documents. It usually makes more sense to # put this into the configuration for just one virtual host. CacheEnable disk / # The result of CacheDirLevels * CacheDirLength must not be higher than # 20. Moreover, pay attention on file system limits. Some file systems # do not support more than a certain number of inodes and # subdirectories (e.g. 32000 for ext3) CacheDirLevels 2 CacheDirLength 1 </IfModule> and it doesn't seem to be caching anything at all. The drive itself is a freshly installed ssd drive formatted with ext4.

  Read the article

• Boot from USB on MediaSmart EX485

  - by Matt Hanson

  I have an HP MediaSmart EX485. I'm attempting to install Vail on it with a USB flash drive and this guide: http://www.mediasmartserver.net/2010/04/26/how-to-install-windows-home-server-vail-on-the-hp-mediasmart-server/. I'm having issues getting the server to boot from the USB flash drive. The MediaSmart itself being headless doesn't help matters. The flash drive has an LED on it for disk activity, and I'm able to see that it's detected when the server is powered on, but it's definitely not booting from it. Any ideas?

  Read the article

• Windows Server 2003 - Handling hundreds of simultaneous downloads

  - by Paul Hinett

  At the moment I have a single server with 4 1TB hard disks, daily I haver over 150 MP3 music files uploaded (around 80mb each). At busy periods there is over 300 people streaming / downloading these mixes all at once, 75% of the activity is on the most recently uploaded stuff which is all on a single hard disk. My read speads on the hard disk are very low due to such high activity of 200+ reads all happening at the same time on a single hard disk (ran some tests with HDTach). What would be a logical solution to solve this, a couple of ideas I had are: Load balance with another server Install faster hard disks (what are best these days? SCSI / SATA) Spread the most accessed files over the 4 drives so it is sharing the load between all 4 disks, instead of all the most accessed (most recent) all on the most recently installed drive. Obviouslly load balance is the most expensive option, but would it dramatically help? Some help on this situation would be great!

  Read the article

• Intel RST crashing! IAStorUI unstable in win 8.1

  - by user269549

  I have a Z87E-ITX Asrock mobo. Using a new 64G Corsair SSD as cache and a new Western Digi Black Scorpion 750G 2.5" drive. Using windows 8.1. Latest software or not, I can't open Intel RST software without it saying IAStorUI has stopped working. A problem caused the program to stop working correctly blah blah. I have had some issues recently with Robotic sounds causing fps drops etc but found it was the HDD. After a standard windows scan and fix (& update to win 8.1) I haven't been able to open Intel RST. I thought maybe I should try to look for an SSD cache drive checker but as it doesn't show up as a drive, I'm unsure how any program can scan it.

  Read the article

• MacBook Pro - 7200 vs 5400 rpm drives - Heat and Noise

  - by webworm

  I am looking at a new 15" MacBook Pro for development purposes. I am planning to run a Virtual Machine for about 50% of my work (Windows 7 x64, IIS, SQL Server, and VS 2010). The upgrade from a 5400 rpm drive to a 7200 rpm is only $45. From what I understand the faster rotational speed of the 7200 rpm drive will help virtual machine performance. However, I am concerned that additional heat and fan noise might be an issue. I will be running mostly on A/C power so decreased battery life is not a major concern for me. Since I would be running with a Core i7 processor which gives off a fair amount of heat already I was wondering if it might be best to stay at 5400 rpm for the hard drive. What do you all think? Thanks!

  Read the article

• Partition disk for dual boot Windows XP and Windows 7 (shared files)

  - by soupagain

  I wish to dual boot Windows XP and Windows 7. I wish to have my documents available from both OSes. Do I create a single partition and it just works? 2 partitions, one for each OS? 3 partitions, one for each OS and one for the "my documents"? [EDIT] I used 3 partitions, one for each partition and one for docs which is mapped as a separate drive. Works perfectly. The only think you need to do is hide the other OS partition, ie for Windows XP, hide the Windows 7 partition. You do this from partition manager.

  Read the article

• Partition disk for dual boot Windows XP and Windows 7 (shared documents)

  - by soupagain

  I wish to dual boot Windows XP and Windows 7. I wish to have my documents available from both OSes. Do I create a single partition and it just works? 2 partitions, one for each OS? 3 partitions, one for each OS and one for the "my documents"? [EDIT] I used 3 partitions, one for each partition and one for docs which is mapped as a separate drive. Works perfectly. The only think you need to do is hide the other OS partition, ie for Windows XP, hide the Windows 7 partition. You do this from partition manager.

  Read the article

• SQL Server & Disk Space

  - by Dismissile

  I created a database on a local SQL server that we use for development. I created the log and data files on a second hard drive (E:\MSSQL\DATA). I am using this database to do some speed tests so I created a lot of data (7 Million rows). I started running some pretty intensive queries and to get some test data I ran an update statement that updated all 7 million rows and now it has taken up all of the space on my C:\, which I don't understand since I put the data files on the E:\. Is there some files on the C:\ that would be growing based on me running queries on this other database, if so how do I stop it? I am doing with this database but I need to get my C:\ back in order. The database file group was PRIMARY, is this relevant?

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >