Search Results

Search found 41497 results on 1660 pages for 'fault'.

Page 114/1660 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• SQL 2008 Log Reader fails with 'Could not execute sp_replcmds" - Transactional Replication

  - by JoeJoe

  Transactional Replication. Two servers SQL server 2008sp1 using domain account. If I make a small dummy setup it works fine. If I use copy of my Production database it fails with MSSQL_REPL20011 error 'could not execute sp_replcmds'.(and MSSQL error 15517, and MSSQL_REPL22037). I've restarted the Agent - no good. How do I troubleshoot this to find root cause?

  Read the article

• Virtualmin install failing on Rackspace Debian 5.0

  - by Rob

  Hi - Running the install.sh script as-is from Virtualmin (GPL version), I get a dovecot error after about 5.5mins of installation. I have tried this on several versions of the server - same error whether or not I run apt-get update +/- apt-get upgrade .... and whether or not I have the FQDN set. Here's the end of the installation: http://screencast.com/t/ZDkxMmY1NDQ Any hints/suggestions, etc. would be much appreciated... Thanks, Rob

  Read the article

• Virtualmin install failing on Rackspace Debian 5.0

  - by Rob

  Hi - Running the install.sh script as-is from Virtualmin (GPL version), I get a dovecot error after about 5.5mins of installation. I have tried this on several versions of the server - same error whether or not I run apt-get update +/- apt-get upgrade .... and whether or not I have the FQDN set. Here's the end of the installation: http://screencast.com/t/ZDkxMmY1NDQ Any hints/suggestions, etc. would be much appreciated... Thanks, Rob

  Read the article

• "Unable to open MRTG log file" error with nagios and mrtg

  - by Simone Magnaschi

  We have a strange issue with our setup of icinga / nagios and mrtg. Icinga is working great and has no problem, it can monitor basically everything without issues. We setup mrtg to gather bandwith data from our routers and switches. MRTG is working fine: it stores the log data in the /var/www/mrtg/ directory and displays the graph data via web. We assume so MRTG is doing great. We tried to setup bandwidth checks in nagios: define service{ use generic-service ; Inherit values from a template host_name zywall-agora service_description ZYWALL AGORA TRAFFICO check_command check_local_mrtgtraf!/var/www/mrtg/x.x.x.x_2.log!AVG!1000000,2000000!5000000,5000000!1000 check_interval 1 ; Check the service every 1 minute under normal conditions retry_interval 1 ; Re-check every minute until its final/hard state is determined } Where /var/www/mrtg/x.x.x.x_2.log is the correct log path file. We keep on getting Unable to open MRTG log file error in the test result in icinga web interface. We tried everything: give ownership to user nagios or icinga to the log file give chmod 777 to the file try to copy the file in another directory and give it full permission Same error. The strange thing is that if we use the command that nagios generate in a bash session the command works like a charm: /usr/lib64/nagios/plugins/check_mrtgtraf -F /var/www/mrtg/x.x.x.x_2.log -a AVG -w 10,20 -c 5000000,5000000 -e 10 Result: Traffic WARNING - Avg. In = 17.9 KB/s, Avg. Out = 5.0 KB/s|in=17.877930KB/s;10.000000;5000000.000000;0.000000 out=5.000000KB/s;20.000000;5000000.000000;0.000000 We ran that command line as root, as user nagios and as user icinga and all three worked ok. We thought that the command that nagios perform maybe has something wrong in it, so we debugged nagios but we found out that the generated command from nagios is the same as above. Searching on google for these kind of problem returns only issues of systems where mrtg is not installed or issues with the wrong path to the log file, but these seems not to be our case. We are stuck, can somebody help?

  Read the article

• Exchange 2003: Fresh install, couple noob questions.

  - by Eli

  Hi All, Thanks for reading! I have a small network set up for a local office here, and have a fresh install of Exchange 2003 on our sole-server PDC. The network uses one domain, call it ourdomain.net, which is DNSed locally, but not DNSed for the actual domain, so ourdomain.net works from within the network, but from outside, it's just pointed to some domain parking. I have a completely different domain, call it emaildomain.com, which is currently setup for our website and email, which is hosted with a standard hosting company. We've been using a combination of Thunderbird and Outlook (with local .pst files) for email. I've been asked to setup Exchange to work with our email, but am not familiar with it. The install seems to have gone just fine. The question is: How do I get email from a domain outside our network to work with the exchange server? Do I need to move the email for that domain to point to our local server (I so hope not!), or can I just set exchange so somehow slurp mail from the existing mailboxes on our host for that domain's mail? Or are there better ideas I don't know to ask for? Any help very appreciated - thanks!

  Read the article

• one step Bugzilla installation

  - by Martin

  I'm looking into installing Bugzilla either on a Windows or Linux box. Bugzilla requires a bunch of packages (apache, sql, mail sending?). Does anyone know of a pre-packaged installer which includes most common options or a linux virtual machine image?

  Read the article

• Powershell - Set-ClusteredScheduledTask - Error "Incorrect function."

  - by NealWalters

  I'm experimenting with Powershell to add a ClusteredScheduledTask on a clustered server (Win 2012/R2) Technet sample code gives error: #canned exampled from http://technet.microsoft.com/en-us/library/jj649815.aspx $Action01 = New-ScheduledTaskAction -Execute Notepad $Action02 = New-ScheduledTaskAction -Execute Calc Set-ClusteredScheduledTask -TaskName "Task03" -Action $Action01,$Action02 Error: Set-ClusteredScheduledTask : Incorrect function. At I:\Scripts\TaskSchedulerSetupJobs\TestWebSampleCode.ps1:4 char:1 + Set-ClusteredScheduledTask -TaskName "Task03" -Action $Action01,$Action02 + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : NotSpecified: (PS_ClusteredScheduledTask:Root/Microsoft/...edScheduledTask) [Set-ClusteredScheduledTask], CimException + FullyQualifiedErrorId : HRESULT 0x80070001,Set-ClusteredScheduledTask Added: As KrisFR pointed out below, I really meant to do a Register, not Set, but I still get the same basic error: #canned exampled from http://technet.microsoft.com/en-us/library/jj649815.aspx cls $Trigger = New-ScheduledTaskTrigger -At 12:00 -Once $Action01 = New-ScheduledTaskAction -Execute Notepad Register-ClusteredScheduledTask -TaskName "Task03" -Trigger $Trigger -Action $Action01 Error: Register-ClusteredScheduledTask : The parameter is incorrect. At I:\Scripts\TaskSchedulerSetupJobs\TestWebSampleCode.ps1:5 char:1 + Register-ClusteredScheduledTask -TaskName "Task03" -Trigger $Trigger -Action $Ac ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidArgument: (PS_ClusteredScheduledTask:Root/Microsoft/...edScheduledTask) [Register-ClusteredScheduledTask], CimExce ption + FullyQualifiedErrorId : HRESULT 0x80070057,Register-ClusteredScheduledTask

  Read the article

• Ldap ssh authentication is super slow... any way to speed it up?

  - by Johnathon

  I am running OpenSUSE. Here is the output of ssh -vvv: OpenSSH_5.8p1, OpenSSL 1.0.0c 2 Dec 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to <ipaddress> [ipaddress] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug3: Incorrect RSA1 identifier debug3: Could not load "/root/.ssh/id_rsa" as a RSA1 public key debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /root/.ssh/id_rsa type 1 debug1: identity file /root/.ssh/id_rsa-cert type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: identity file /root/.ssh/id_dsa-cert type -1 debug1: identity file /root/.ssh/id_ecdsa type -1 debug1: identity file /root/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1 debug1: match: OpenSSH_5.1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "ipaddress" from file "/root/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /root/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],[email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 138/256 debug2: bits set: 529/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA cb:7f:ff:2e:65:28:f0:95:e6:8a:71:24:2a:67:02:2b debug3: load_hostkeys: loading entries for host "<ipaddress>" from file "/root/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /root/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug1: Host '<ipaddress>' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:4 debug2: bits set: 504/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /root/.ssh/id_rsa (0xb789d5c8) debug2: key: /root/.ssh/id_dsa ((nil)) debug2: key: /root/.ssh/id_ecdsa ((nil)) debug1: Authentications that can continue: publickey,keyboard-interactive debug3: start over, passed a different list publickey,keyboard-interactive debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /root/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply It hangs here for a good 30 seconds to a minute then debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /root/.ssh/id_dsa debug3: no such identity: /root/.ssh/id_dsa debug1: Trying private key: /root/.ssh/id_ecdsa debug3: no such identity: /root/.ssh/id_ecdsa debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 I added PubkeyAuthentication no to the /etc/ssh/ssh_config and the /etc/ssh/sshd_config which makes it faster getting to the password prompt, but the password prompt still takes some time. Any way to fix that? Here is where the password hangs debug3: packet_send2: adding 32 (len 25 padlen 7 extra_pad 64) debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 0 debug3: packet_send2: adding 48 (len 10 padlen 6 extra_pad 64) debug1: Authentication succeeded (keyboard-interactive). Authenticated to ipaddress ([ipaddress]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. FIXED!!!!!!!!!!!!!! What is did... In the nsswitch_conf I had ldap included in the group and passwd which slows it down a lot. Thank you everybody for your input passwd: compat group: files hosts: files dns networks: files dns

  Read the article

• Scripting an automated SQLServer 2008 DR move

  - by ItsAMystery

  Hi All We use the built in logshipping in SQLServer to logship to our DR site but once in a month do a DR test which requires us to move back and forth between our Live and BAckup servers. We run multiple (30) databases on the system so manually backing up the final logs and disabling the jobs is too much work and takes too long. I though no problem, I will script it but have run into trouble with it always complaninig that the final logship is too early to apply even though I dont export the final log until putting the database into norecovery mode. Firstly, does any one no a simple and reliable way of doing this? I have lokoed at some 3rd party software (redgate sqlbackup I think it was) but that didnt make it easy in this situation either. What I want to be able to do is basically run a script (a series of stored procedures) to get me to DR and run another to get me back with no dataloss. My scripts are very simplistic at the moment but here they are: 2 servers Primary Paris Secondary ParisT The StartAgentJobAndWait is a script written by someone else (ta) and just checks the jobs have finished or quits it if it never ends. At the moment I am just using a test database called BOB2 but if I can get it working will pass in the database and job names. from PARIS: /* Disable backup job */ exec msdb..sp_update_job @job_name = 'LSBackup_BOB2', @enabled = 0 exec PARIST.msdb..sp_update_job @job_name = 'LSCopy_PARIS_BOB2', @enabled = 0 exec PARIST.msdb..sp_update_job @job_name = 'LSRestore_PARIS_BOB2', @enabled = 0 exec PARIST.master.dbo.DRStage2 ParisT DRStage2 DECLARE @RetValue varchar (10) EXEC @RetValue = StartAgentJobAndWait LSCopy_PARIS_BOB2 , 2 SELECT ReturnValue=@RetValue if @RetValue = 1 begin print 'The Copy Task completed Succesffuly' END ELSE print 'The Copy task failed, This may or may not be a problem, check restore state of database' SELECT @RetValue = 0 EXEC @RetValue = StartAgentJobAndWait LSRestore_PARIS_BOB2 , 2 SELECT ReturnValue=@RetValue if @RetValue = 1 begin print 'The Restore Task completed Succesffuly' END ELSE print 'The Copy task failed, This may or may not be a problem, check restore state of database' exec PARIS.master.dbo.DRStage3 /* Do the last logship and move it to Trumpington */ BACKUP log "BOB2" to disk='c:\drlogshipping\BOB2.bak' with compression, norecovery EXEC xp_cmdshell 'copy c:\drlogshipping \\192.168.7.11\drlogshipping' EXEC PARIST.master.dbo.DRTransferFinish AS BEGIN restore database "BOB2" from disk='c:\drlogshipping\bob2.bak' with recovery

  Read the article

• Disk is spinning down each minute, unable to disable it

  - by lzap

  I played with spindown and APM settings of my Samsung discs and now they spin down every minute. I want to disable it, but it seems it does not accept any of the spindown time or APM values. Nothing works, it's all the same. Please help what values should be proper for it. I do not want it to spin down at all. /dev/sda: ATA device, with non-removable media Model Number: SAMSUNG HD154UI Serial Number: S1Y6J1KZ206527 Firmware Revision: 1AG01118 Standards: Used: ATA-8-ACS revision 3b Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 2930277168 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 1430799 MBytes device size with M = 1000*1000: 1500301 MBytes (1500 GB) cache/buffer size = unknown Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test Media Card Pass-Through * General Purpose Logging feature set * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * NCQ priority information DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 326min for SECURITY ERASE UNIT. 326min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50024e900300cca3 NAA : 5 IEEE OUI : 0024e9 Unique ID : 00300cca3 Checksum: correct I have the very same disc which I did not "tuned" and it does not spin. But I do not know where to read the settings from. The hdparm only shows this: Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 Edit: It seems the issue was tuned daemon in RHEL6. It was too aggressive, I turned off disc tuning and it seems they are no longer spinning down.

  Read the article

• DD-WRT VPN error 800?

  - by MrZombie

  I have set up a router with DD-WRT Mega on my Asus WL-500gP V2, and I can't connect to the VPN service. I have set it up according to the configuration on the DD-WRT wiki, so the server IP is set to 192.168.1.1, which is the address of the router, and I set up the client addresses to be 192.168.1.20-29. My chap secrets are set up correctly, and still, I get an error 800 on windows XP. As far as I can tell, it means my network is unreachable. The server responds to ping.

  Read the article

• OpenSSL support for Ruby: "Cipher is not a module (TypeError)"

  - by smotchkkiss

  The Problem Our systems admin needed to upgrade the packages on our CentOS 5.4 dev server to match the packages on our production server. The upgrade affected ruby and/or openssl. We run a Ruby on Rails issue tracking system called Redmine that is deployed with Passenger on Apache. Everything worked before the server update, but when trying to access the ticket system now, I get the following error: Error message: Cipher is not a module Exception class: TypeError Application root: /home/dev/rails/redmine-0.8.7 I've been trying so hard to fix this problem but I can't seem to beat it. I have tried following this guide: http://iamclovin.posterous.com/how-to-solve-the-cipher-is-not-a-module-error When I try require 'openssl' in IRB, I do see a true return value. However, I'm still seeing the Cipher.rb is not a module TypeError when accessing the ticket system. Possibly (probably) related: I've tried updating Passenger, but when I try passenger-install-apache2-module I see: Checking for required software... * GNU C++ compiler... found at /usr/bin/g++ * Ruby development headers... found * OpenSSL support for Ruby... /usr/lib/ruby/1.8/openssl/cipher.rb:22: Cipher is not a module (TypeError) Any help?

  Read the article

• Is "aptitude full-upgrade" safe to run on a new server?

  - by Miko

  Is it safe to run this command on a brand new Debian server? aptitude -y full-upgrade The command is from http://www.linode.com/stackscripts/view/?StackScriptID=1 On a related note, how is aptitude update different from apt-get update?

  Read the article

• Sonicwall TZ 210 Enhanced OS - Allow Wireless to talk VPN

  - by Malnizzle

  Does anyone know how to allow the WLAN access to talk to a VPN subnet that is set up on a Sonicwall TZ 210 Enhanced? I got the WLAN (192.168.2.X) talking to the LAN (192.168.1.X), but I also need to the WLAN to talk to the VPN (192.168.3.X) Thanks!

  Read the article

• Gitorious errors

  - by Switz

  I installed Gitorious on my (shared) hosting. I was getting errors, but I seemed to have fixed most of them. It is working. When I commit/push, I get a lot of remote: errors spewed out although it does push the files properly from what I can tell. Here are the errors I'm getting (I swapped out the domain to git.domain.com): $ git push origin master Counting objects: 5, done. Delta compression using up to 2 threads. Compressing objects: 100% (3/3), done. Writing objects: 100% (3/3), 283 bytes, done. Total 3 (delta 2), reused 0 (delta 0) remote: /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/inflector.rb:361:in `const_defined?': wrong constant name Admin/usersHelper (NameError) remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/inflector.rb:361:in `constantize' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/inflector.rb:360:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/inflector.rb:360:in `constantize' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/core_ext/string/inflections.rb:162:in `constantize' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:137:in `helper' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:115:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:115:in `helper' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:120:in `helper' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:115:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:115:in `helper' remote: from /home/saegit/GIT.DOMAIN.COM/app/controllers/searches_controller.rb:22 remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:158:in `require' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:158:in `require' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:265:in `require_or_load' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:224:in `depend_on' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:136:in `require_dependency' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:414:in `load_application_classes' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:413:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:413:in `load_application_classes' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:411:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:411:in `load_application_classes' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:197:in `process' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:113:in `send' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:113:in `run' remote: from /home/saegit/GIT.DOMAIN.COM/config/environment.rb:24 remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:27:in `require' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:27:in `load_env' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:31:in `load_processor' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:55:in `queue' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:59:in `do_publish' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging.rb:39:in `publish' remote: from ./hooks/messaging.rb:45:in `post_message' remote: from hooks/post-receive:37 remote: => Syncing Gitorious... To [email protected]:os/ptd.git 7526ccb..3316eb2 master -> master

  Read the article

• VB6 Scheduled tasks on Windows Server 2008 Standard

  - by Terry

  Hello, this is my first time using this forum. Here is my situation: We are having issues with specific tasks written in VB6 it would seem. I am not a developer, but I am told these tasks exe are written in VB6. The task is initiated by task scheduler, the process begins to run (you can view the task in task manager, but no resources are used, 00 CPU, 760 K RAM), but nothing occurs. In a normal operating situation, the task will use 25% CPU and up to 20 MB RAM. When the task fails to run, you can still end and start it via Task Scheduler, but nothing happens. If you run just the process via the exe, it runs fine. The problem just seems to be when it is initiated via Task Scheduler. And this is a random issue, which always disappears after a server reboot. All of these tasks are VB 6 applications on Windows Server 2008 Standard, some servers are SP1, some are SP2, but both versions experience the issue. The task has been configured to run with highest priviledges, and to run whether logged on or not. Setting compatibility mode on the exe to 2003 does not make a difference. Situation 1: 51 - ERROR - Program did not appear to complete, check server!! (Desc: Input past end of file) in this situation, the task is running in task scheduler and you can view the process in task manager. . In the log file, all that is logged is: 12/17/2009 03:16 Starting T2 Populator version - 1.0.12 You can just end the task via task scheduler and start it via task scheduler and away it goes Situation 2: 36 - ERROR - Program last ran on 16-Dec-2009 in this situation the task is running in Task Scheduler and you can view the process in task manager, but no resources are used, 00 CPU, 760 K RAM. Nothing is logged in the log file. You end the task via task scheduler, but you must manually run the exe for it to complete. I was wondering if anyone else has experienced issues with VB6 tasks, or any tasks for that matter, on Server 2008?

  Read the article

• Jenkins: Use it with SSL / https

  - by Tim

  I have a Fedora server running Jenkins which I install via yum. Everything is okay, I can access it with http://ci.mydomain.com. But now, I want to access it with https://ci.mydomain.com, so the login with username and password is encrypted. How can I do this? Best Regards Tim Update My /etc/sysconfig/jenkins file. Starting Jenkins works, but I can not access Jenkins with the webbrowser with https://ci.mydomain.com or http://ci.mydomain.com:443, ... ## Path: Development/Jenkins ## Description: Configuration for the Jenkins continuous build server ## Type: string ## Default: "/var/lib/jenkins" ## ServiceRestart: jenkins # # Directory where Jenkins store its configuration and working # files (checkouts, build reports, artifacts, ...). # JENKINS_HOME="/var/lib/jenkins" ## Type: string ## Default: "" ## ServiceRestart: jenkins # # Java executable to run Jenkins # When left empty, we'll try to find the suitable Java. # JENKINS_JAVA_CMD="" ## Type: string ## Default: "jenkins" ## ServiceRestart: jenkins # # Unix user account that runs the Jenkins daemon # Be careful when you change this, as you need to update # permissions of $JENKINS_HOME and /var/log/jenkins. # JENKINS_USER="jenkins" ## Type: string ## Default: "-Djava.awt.headless=true" ## ServiceRestart: jenkins # # Options to pass to java when running Jenkins. # JENKINS_JAVA_OPTIONS="-Djava.awt.headless=true" ## Type: integer(0:65535) ## Default: 8080 ## ServiceRestart: jenkins # # Port Jenkins is listening on. # JENKINS_PORT="8080" ## Type: integer(1:9) ## Default: 5 ## ServiceRestart: jenkins # # Debug level for logs -- the higher the value, the more verbose. # 5 is INFO. # JENKINS_DEBUG_LEVEL="5" ## Type: yesno ## Default: no ## ServiceRestart: jenkins # # Whether to enable access logging or not. # JENKINS_ENABLE_ACCESS_LOG="no" ## Type: integer ## Default: 100 ## ServiceRestart: jenkins # # Maximum number of HTTP worker threads. # JENKINS_HANDLER_MAX="100" ## Type: integer ## Default: 20 ## ServiceRestart: jenkins # # Maximum number of idle HTTP worker threads. # JENKINS_HANDLER_IDLE="20" ## Type: string ## Default: "" ## ServiceRestart: jenkins # # Pass arbitrary arguments to Jenkins. # Full option list: java -jar jenkins.war --help # JENKINS_ARGS="--httpsPort=443 --httpsKeyStore=/root/.keystore --httpsKeyStorePassword=MYPASSWORD"

  Read the article

• one way routing

  - by user101531

  I have two computers connected with VPN, and some virtual machines on each. I want everything to see each other (that is basically 4 different networked machines). What I've not managed so far is that a computer on the one end to be visible to the other end. In tracert terms: 192.168.78.42>tracert 192.168.69.18 Tracing route to WIN-2K8R2 [192.168.69.18] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.78.17 2 * * * Request timed out. 3 217 ms 78 ms 78 ms WIN-2K8R2 [192.168.69.18] Trace complete. 192.168.78.42>tracert 192.168.69.112 Tracing route to 192.168.69.112 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.78.17 2 333 ms * 337 ms WIN-2K8R2 [192.168.86.22] 3/4/5 * * * Request timed out. 6 ^C 192.168.69.18>tracert 192.168.69.112 Tracing route to 192.168.69.112 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.69.112 Trace complete. 192.168.69.112>tracert 192.168.78.42 Tracing route to 192.168.78.42 over a maximum of 30 hops 1 1 ms * <1 ms 192.168.69.18 2 79 ms 77 ms 80 ms 192.168.86.21 3 80 ms 77 ms 81 ms 192.168.78.42 Trace complete. Note: the 4 machines are 192.168.69.112 (winXP), 192.168.69.18=192.168.86.22 (win2K8R2), 192.168.86.21=192.168.78.17 (Linux), 192.168.78.42 (win2K3). The VPN is a TAP openvpn connection between 192.168.86.21 and 192.168.86.22. I would say that the problem is in the win2K8 machine, but Windows networking is my weak point.

  Read the article

• Dovecot vs Courier vs Cyrus

  - by wag2639

  What is best for a Personal/SMB mail server running on an Ubuntu Server (8.04+)? I want to setup my own mail server at home to evaluate some options for my company before I make a recommendation. Which is the most secure, efficient, and reliable? Also, which is easiest to integrate with an LDAP and Calendar solution?

  Read the article

• Authentication on Exchange using EWS managed API

  - by Jacob Proffitt

  I'm having a weird issue with the Exchange Web Services. The operation I'm attempting is pretty simple—pull a user's calendar items for the current week on our internal website. When testing locally, the ews managed API pulls the calendar information just fine. When deployed to the web server (using integrated windows authentication), it chokes. My trace is telling me that access is denied in the Exchange call. Initially, I thought this was a double-hop NTLM permissions issue, but it turns out that the service actually works for some internal users, but not for most. The only thing I can find that the functioning users have in common is that they are blackberry users and I surmise that their exchange permissions are setup differently. Or are their active directory accounts setup differently? I don't know and it's driving me crazy. I surmise that the blackberry app runs some scripts when a user is added to the application, but I'm completely unfamiliar with what may be going on behind the scenes there. So. Is there a way to duplicate the permissions those users enjoy (either AD or Exchange permissions)? And/or how exactly does one fix the double-hop credentials situation?

  Read the article

• GConf error and gnome does not load properly in RHEL 5.3

  - by Tim

  Hello, I am using Red Hat Enterprise Linux 5.3 . I created a user oracle on the system, using the following command useradd -g oinstall -G dba,oper -d /home/oracle oracle Now, when i try to login as the user oracle, GNOME does not load properly and i get popup box error message like the following GConf error:Failed to contact configuration server;some possible causes are that you need to enable TCP/IP for ORBit,or your have NFS locks due to a system crash.(Details-/:IOR file'/tmp/gcofd-cheetahman/tock/ior' not opened successfully,no gconfd located:Permission denied 2: IOR file /tmp/gconfd-cheetahman/lock/ior not opened succesfully no gconfd located: Permission denied) Any way to fix this ? Thank You

  Read the article

• IIS7 Custom ASP.NET Errors

  - by Nathan Roe

  I'm trying to setup a custom error page for the IIS 7 404.13 (Content length too large) error. Here's the relevant sections of my web.config file: <system.webServer> <httpErrors errorMode="Custom" existingResponse="Replace"> <remove statusCode="404" subStatusCode="13" /> <error statusCode="404" subStatusCode="13" prefixLanguageFilePath="" path="/FileUpload/Test.aspx" responseMode="ExecuteURL" /> </httpErrors> <security> <requestFiltering> <requestLimits maxAllowedContentLength="10240" /> </requestFiltering> </security> </system.webServer> The response that is being sent back to the server is blank. The Test.aspx file is not blank. Any idea what's going on here?

  Read the article

• hyperv vss writer unexpected error

  - by Eric Martin

  I am using Mozy Pro to backup our Hyperv servers. I am doing this without any issues on a 2nd server but this box hasn't backed up sucessfully yet. I was told by the support tech at Mozy to type: vssadmin list providers >c:\providers.txt vssadmin list writers >c:\writers.txt Writers.txt: vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool (C) Copyright 2001-2013 Microsoft Corp. Writer name: 'Task Scheduler Writer' Writer Id: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124} Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b} State: [1] Stable Last error: No error Writer name: 'VSS Metadata Store Writer' Writer Id: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06} Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93} State: [1] Stable Last error: No error Writer name: 'Performance Counters Writer' Writer Id: {0bada1de-01a9-4625-8278-69e735f39dd2} Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381} State: [1] Stable Last error: No error Writer name: 'System Writer' Writer Id: {e8132975-6f93-4464-a53e-1050253ae220} Writer Instance Id: {506e7d9c-ded3-4edf-824a-4dd9af7f7538} State: [1] Stable Last error: No error Writer name: 'ASR Writer' Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4} Writer Instance Id: {1de438e4-09de-487c-9ea8-eeafbe3fd210} State: [1] Stable Last error: No error Writer name: 'COM+ REGDB Writer' Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f} Writer Instance Id: {511d23d9-4cbb-400f-b739-e6e0a8ecdbee} State: [1] Stable Last error: No error Writer name: 'Microsoft Hyper-V VSS Writer' Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} Writer Instance Id: {32f41185-2b20-41ff-a7aa-92c262f578cd} State: [1] Stable Last error: Unexpected error Writer name: 'Registry Writer' Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485} Writer Instance Id: {fa328ece-623f-43cc-9888-e897e108c40e} State: [1] Stable Last error: No error Writer name: 'Shadow Copy Optimization Writer' Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f} Writer Instance Id: {7b582861-7f7f-4c10-adb1-5106bcab3902} State: [1] Stable Last error: No error Writer name: 'WMI Writer' Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0} Writer Instance Id: {d2f73a0f-c19a-44cc-bcd2-6c84ac6e516b} State: [1] Stable Last error: No error Writer name: 'MSMQ Writer (MSMQ)' Writer Id: {7e47b561-971a-46e6-96b9-696eeaa53b2a} Writer Instance Id: {95ea6efc-c00c-47ca-90d1-28fbe6d7a8d0} State: [1] Stable Last error: No error Writer name: 'IIS Config Writer' Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6} Writer Instance Id: {d5a32f43-0675-400d-8502-cdece4c867e1} State: [1] Stable Last error: No error Providers.txt: vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool (C) Copyright 2001-2013 Microsoft Corp. Provider name: 'Microsoft File Share Shadow Copy provider' Provider type: Fileshare Provider Id: {89300202-3cec-4981-9171-19f59559e0f2} Version: 1.0.0.1 Provider name: 'Microsoft Software Shadow Copy provider 1.0' Provider type: System Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5} Version: 1.0.0.7 The tech said I needed to resolve this issue: Writer name: 'Microsoft Hyper-V VSS Writer' Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} Writer Instance Id: {32f41185-2b20-41ff-a7aa-92c262f578cd} State: [1] Stable Last error: Unexpected error I checked the event viewer and this is the only thing I found related to hyperv: I don't know where to start to resolve this or to find out where the issue is at. I know nothing of the vss writer for hyperv so any input would be greatly appreciated.

  Read the article

• Change SQL Server 2008 Express ide language

  - by Alexandre Jobin

  Hi! is it possible to install another IDE language to SQL Server 2008 Express like i can do in Visual Studio? In the options of Visual Studio, i can change the Environnement Language. Can i do the same with SQL Server 2008? alex

  Read the article

• Unexpected server restart - Windows 2003 SP2 fully patched

  - by PCTech

  I'm having problems with a server that has been restarting itself randomly for the past 3 months. The server is windows 2003 with SP2 Domain Controller and it is fully patched. I have seen the following errors in event log: Source: USER32 Category: None Type: Information Event ID: 1074 User: Domain\Administrator The process winlogon.exe has initiated the restart of computer (server name) on behalf of user domainname\Administrator for the following reason: No title for this reason could be found Reason Code: 0x840000ff Shutdown Type: restart I have ran out of ideas as to what might be causing this issue. The system is clean and not infected. There are no scheduled tasks responsible for the restart either. I'm considering moving the backup (Backup Exec 12.5) to a different server but I'm almost certain that this is not the issue as the restart times vary and do not match the scheduled backup jobs. Any suggestions to help me resolve this issue would be appreciated, thanks.

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >