Search Results

Search found 3811 results on 153 pages for 'launch'.

Page 114/153 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• TeamCity EC2 Integration via ISA Server

  - by Tim Long

  I have a TeamCity server which is actually installed on SBS 2003 Premium with ISA Server (firewall/proxy) installed. My ADSL connection has multiple IP addresses, which all resolve directly to my SBS external NIC. The NIC is therefore multi-homed and I have allocated one of the IP addresses specifically to TeamCity. In ISA, I've created an access rule to allow the traffic in. I can access my TeamCity server externally and view the web interface, that all works fine. I want to use the Amazon EC2 integration in TeamCity to launch build agents 'in the cloud'. The problem I am having is that when the agent starts, it sees the server and registers, then just sits there waiting. On the server side, the agent appears as 'disconnected'. Examining the settings, the agent's IP address appears to be that of the external NIC. What I think might be happening is that the traffic is undergoing Network Address Translation (NAT) so that TeamCity always thinks the agent is locally installed and therefore can't communicate with the actual remote agent. This seems to happen even though I have a permanent static IP address dedicated to TeamCity. So, the question is this. How can I make traffic to a specific IP address pass through the ISA server un-NATted?

  Read the article

• How to permanently "renice" a process on Mac OS X (or iOS, etc)?

  - by mralexgray

  I use a nice (free) process manager called ATMonitor for Mac OS X that has a lot of cool hidden features... one of which is being able to click on a running process.. and set the "renice" from +20 (less priority) to -20 (highest priority). The best part.... it sticks between restarts... SO you want XYZ to get full attention all the time.. you set it once and it's done... I want to do the same thing (renice a process) on an iPad running a particular daemon.. and I don't know how to set a renice permanently. I can do it once, and it works fine... But the setting is lost on a reboot. I read somewhere.. Now, as for permanently resetting the priority of a process, this can't be done directly. You can fake it, however, with a shell script that starts the app and then immediately renice's it. Give that script a ".command" extension and it will be double-clickable in the GUI. Not very elegant, but it gets the job done. But as it says.. not very elegant, and I dont think this is how ATMonitor does it.... I found this thread.... http://superuser.com and they gave a way to do it as a launch argument, but no apparent way to save it as a persistent value... for instance - if the program wasn't going to be started by launchd... How do I set a permanent renice level, per executable binary, independent of it's PID, when, how or why it was launched?

  Read the article

• Why can’t two programs access my webcam simultaneously?

  - by qdii

  I first launch cheese and my webcam turns on. I then run vlc to grab the output of /dev/video0 but it fails with: [0x7f3ea40012e8] v4l2 demux error: cannot set input 0: Device or resource busy [0x7f3ea40012e8] v4l2 demux error: cannot set input 0: Device or resource busy [0x7f3ea4002168] v4l2 access error: cannot set input 0: Device or resource busy [0x7f3ea4002168] v4l2 access error: cannot set input 0: Device or resource busy [0x7f3eb4000b78] main input error: open of `v4l2:///dev/video0' failed Whatever pair of video programs I run (skype, cheese, vlc, etc.), the result is always the same: the second program can no longer use the webcam when the first one has already grabbed the output. However I find it curious as video4linux states: In general, V4L2 devices can be opened more than once. When this is supported by the driver, users can for example start a "panel" application to change controls like brightness or audio volume, while another application captures video and audio. My webcam is seen in lspci as 058f:a014 Alcor Micro Corp. Asus Integrated Webcam, but I don’t even know what the underlying driver is, so I can’t check whether my problem is driver-related or not. Any input would be more than welcome!

  Read the article

• Crash dump analysis

  - by Ryan Ries

  I hope this isn't a stupid question, and if it is, then I want to at least get it over with so I don't feel so dumb in the future. Here we are, loading up a Windows crash dump with Windbg. Here are the first few lines of the debugger output: 0: kd> .dumpdebug ----- 64 bit Kernel Summary Dump Analysis DUMP_HEADER64: MajorVersion 0000000f MinorVersion 00001db1 ... The MinorVersion I mostly understand. It's hexadecimal and it translates to 7601 in decimal. Windows admins would already be able to tell from that that this must be either a Win7 x64 machine or a 2k8 R2 machine with SP1. But isn't 7601 the build number? It's supposed to be Major.Minor.Build/Revision... right? Also I don't understand the MajorVersion. It should be 6. This version of Windows is 6. But isn't 0000000f in hexadecimal 15 in decimal? The full version string of this version of Windows, when you launch the Command Prompt for instance, is 6.1.7601. If 7601 is the MinorVersion, then what is 1 and what is 6? And why does the crash dump say 0F?

  Read the article

• Windows Authentication behaves oddly when VPN'd

  - by Dan F

  Hi all We've got a few apps that rely on windows authentication - a couple of web apps with AD auth turned on and we usually connect to our SQL servers with windows auth. This normally runs without a hitch. It doesn't work so well if we're VPN'd to a client site though. SSMS Opening SSMS normally from the start menu, then picking a server that normally accepts windows auth, results in a message saying: Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. (.Net SqlClient Data Provider) If I drop to a command prompt and use runas /user:domain\user to launch SSMS I can successfully windows auth to our SQL server instances with that ssms process. If I look in task manager, both copies of ssms.exe (start menu vs runas) have the same user, and I can see no discernible differences between the processes in procexp. AD Auth websites If I open IE and browse to any of our websites that require an authenticated windows user, I get the "who are you" prompt, and that dialog thinks I'm whoever the VPN user is. I can click "Use another account" and authenticate that way though. Outlook Even Outlook prompts for a username when we are VPN'd! It's affecting our Win7 and Vista machines. It's been a while since we had an XP box, but I don't recall having this issue on XP for what it's worth. The VPN connections are just using the built in windows VPN connections, they're not fancy cisco VPNs or anything of that nature. Does anyone know how to tell windows that I'd like to be my normal old primary domain user rather than the VPN user when authenticating to resources in our domain? Heck, I'd be happy with a solution that prompted me with the "who are you" if I was trying to access windows auth requiring resources on the client's VPN. Thanks! Apologies if this is more a superuser question, I wasn't sure which site it best suited. It's about networking and infrastructure and plagues all of our developers here, so I hope it's a serverfault Q.

  Read the article

• Windows 7: Touch gestures in IE not working without explorer.exe being run once

  - by Michael

  Details: Internet Explorer 9 and Windows 7 Professional, running on a HP TouchSmart (touch screen PC). It is going to be a kiosk PC (running a custom GUI for displaying websites). Scenario 1: When running Internet Explorer as a normal program in Windows 7, touch functions work perfectly. I can scroll the website by dragging it with my finger, I can pinch zoom and I can touch-and-hold right click. I now change the default shell in Windows to Internet Explorer (ie. IE starts instead of explorer.exe). Internet Explorer of course starts up when logging in. However, touch functions are reduced to basic clicking (no dragging, no pinch zooming, no touch-and-hold right click). Then I manually start explorer.exe, and the touch functions work again! And here is the weird part: When I kill explorer.exe, the touch functions keeps working - even if I close IE and start a new instance. Scenario 2: The exact same, but instead of changing the default shell to Internet Explorer, I change it to my own program, which uses an embedded Internet Explorer ("WebBrowser"). Same thing happens. What I've tried: Autorun programs: When explorer.exe launches, it launches all the autorun programs. There are no relevant programs being run by explorer, but just in case, I have manually started all the autorun programs, so that it is identical (but without explorer.exe) to a normal login. It still does not work (until I launch explorer.exe). Specifically TabTip.exe, TabTip32.exe and wisptis.exe are all running. All services are also started. To sum it up Running explorer.exe once changes something in the touch capabilities of Internet Explorer. It doesn't matter if explorer.exe is running - as long as it has been run once. Does anyone know what causes this behavior? Or how I can circumvent it neatly? Thanks!

  Read the article

• red5 Install on Ubuntu 10.04? Problems with libslf4j

  - by mrgordon

  I've been trying for many days to get Red5 to install on Ubuntu 10.04. I finally managed to get red5.sh to stop hanging a few seconds in but now I'm getting the following error: Setting default logging context: default Exception in thread "main" java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.red5.server.Bootstrap.bootStrap(Bootstrap.java:135) at org.red5.server.Bootstrap.main(Bootstrap.java:50) Caused by: java.lang.NoSuchMethodError: org.slf4j.impl.StaticLoggerBinder.getContextSelector()Lch/qos/logback/classic/selector/ContextSelector; at org.red5.logging.Red5LoggerFactory.getLogger(Red5LoggerFactory.java:121) at org.red5.logging.Red5LoggerFactory.getLogger(Red5LoggerFactory.java:108) at org.red5.server.Launcher.launch(Launcher.java:51) ... 6 more I suspected that this had to do with slf4j not being installed or on my classpath. I installed logback and libslf4j-java from aptitude and I see related files in my red5 lib directories. For example: /usr/share/red5/lib/slf4j-api-1.6.1.jar /usr/share/red5/lib/log4j-over-slf4j-1.6.1.jar /usr/share/red5/lib/logback-classic-0.9.26.jar /usr/share/red5/lib/logback-core-0.9.26.jar /usr/share/red5/lib/jcl-over-slf4j-1.6.1.jar /usr/share/red5/lib/jul-to-slf4j-1.6.1.jar And I set my classpath to /usr/share/red5/lib/ Any ideas on where to proceed from here? There seem to be a lot of people having trouble getting 10.04 and red5 0.9 working together. I've tried red5-0.9.1.tar.gz and red5_0.9.0-RC1_all.deb. The libraries above should be all that are needed according to Red5's documentation and I got the latest version of each.

  Read the article

• How to register an agent with launchd

  - by Konrad Rudolph

  I’m unable to schedule a periodic launch with launchctl/launchd on OS X (Leopard). Basically, I’m unable to find a step-by-step list of instructions on the web and the intuitive approach doesn’t work. The sync.plist file: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>net.madrat.utils.sync</string> <key>Program</key> <string>rsync</string> <key>ProgramArguments</key> <array> <string>-ar</string> <string>/path/to/folder/</string> <string>/path/to/backup/</string> </array> <key>StartInterval</key> <integer>7200</integer> </dict> </plist> I’ve put this script inside the path ~/Library/LaunchAgents. Next, I’ve registered the script using launchctl load ~/Library/LaunchAgents/sync.plist Finally, to test that it works, I started the job: launchctl start net.madrat.utils.sync – Nothing happened. Manually executing the rsync command in the terminal yields the expected result. I’m fairly sure that the job was registered correctly because if I try to start a non-existing job, I get an error message (which I didn’t get in the above command). What did I do wrong?

  Read the article

• Hudson Mercurial checkout throws exception on Debian

  - by Jack

  I'm trying to configure Hudson to checkout my site's sources from Mercurial but it throws an exception. The /var/lib/hudson/jobs/jobname directory does exist, and I can create a workspace directory in there (even after su hudson), but as soon as I run the Hudson job again this directory disappears and the job ends with the same error: java.io.IOException: Cannot run program "hg" (in directory "/var/lib/hudson/jobs/jobname/workspace"): java.io.IOException: error=2, No such file or directory at java.lang.ProcessBuilder.start(ProcessBuilder.java:460) at hudson.Proc$LocalProc.<init>(Proc.java:192) at hudson.Proc$LocalProc.<init>(Proc.java:164) at hudson.Launcher$LocalLauncher.launch(Launcher.java:639) at hudson.Launcher$ProcStarter.start(Launcher.java:274) at hudson.Launcher$ProcStarter.join(Launcher.java:281) at hudson.plugins.mercurial.MercurialSCM.joinWithPossibleTimeout(MercurialSCM.java:298) at hudson.plugins.mercurial.HgExe.popen(HgExe.java:191) at hudson.plugins.mercurial.HgExe.tip(HgExe.java:171) at hudson.plugins.mercurial.MercurialSCM.calcRevisionsFromBuild(MercurialSCM.java:254) at hudson.scm.SCM._calcRevisionsFromBuild(SCM.java:304) at hudson.model.AbstractProject.calcPollingBaseline(AbstractProject.java:1183) at hudson.model.AbstractProject.checkout(AbstractProject.java:1172) at hudson.model.AbstractBuild$AbstractRunner.checkout(AbstractBuild.java:499) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:415) at hudson.model.Run.run(Run.java:1362) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:145) Caused by: java.io.IOException: java.io.IOException: error=2, No such file or directory at java.lang.UNIXProcess.<init>(UNIXProcess.java:148) at java.lang.ProcessImpl.start(ProcessImpl.java:65) at java.lang.ProcessBuilder.start(ProcessBuilder.java:453) Running on Debian 6.0.1 I wonder if anyone has ran into this before, and hopefully solved it?

  Read the article

• Windows 2008 RemoteAPP client disconnects within a matter of minutes

  - by Jeroen Wilke

  I'm having an odd problem with Windows 2008 TS, and remote applications specifically. The situation is as follows: TS idle timeout is disabled via GPO TS terminating disconnected sessions after 1hr (via GPO) My users can log on to the Terminal server, and get a full desktop, OR via rdp files that give access to a few remote applications. When a user connects to a full desktop, everything is fine and dandy, they will remain logged on indefinately, and when they disconnect the session is terminated after an hour. however, when a user connects using a remote application link, the client seems to disconnect after only a few minutes of inactivity, when you click the window, the session reconnects. EventID's on TS server: 4779: This event is generated when a user disconnects from an existing Terminal Services session, or when a user switches away from an existing destop using Fast User Switching. 4778 : This event is generated when a user reconnects to an existing Terminal Services session, or when a user switches to an existing desktop using Fast User Switching users are connecting directly to 3389, not using a TS-gateway at the moment. This behavior is consistent on different clients that we have, Full desktop is fine, RemoteAPP constantly disconnects. The .rdp file used doesn't list any interesting parameters, aside from what application to launch, and where to find it. Can someone explain to me how there can be a difference in behaviour between full desktop, and remoteapp ? since essentially they use the exact same client ? Regards Jeroen

  Read the article

• RDS, RDWeb, and RemoteApp: How to use public certificate for launching apps on session host?

  - by Bret Fisher

  Question: How do i tell RDWeb to launch apps from remote.domain.com rather then host.internaldomain.local? Environment: Existing org with AD forest. New single Server 2012 running all Remote Desktop Services roles for session host. Used the new 2012 wizard to setup "QuickSessionCollection" with roles: RD Session Host RD Connection Broker RD Gateway RD Web Access RD Licensing Everything works with self-signed cert, but we want to prevent those. The users are potentially non-domain machines so sticking a private root cert for on their machines isn't an option. Every part of the solution needs to use public cert. Added public remote.domain.com cert to all roles using Server Manager GUI: RD Connection Broker - Enable Single Sign On RD Connection Broker - Publishing RD Web Access RD Gateway So now everything works beautifully except the last step: user logs into https://remote.domain.com user clicks a app icon, which in background downloads a .rdp file that is signed by remote.domain.com. .rdp is set to use RD Gateway, which is remote.domain.com .rdp says app is hosted on internal host.internaldomain.local, which doesn't match the RDP-tcp TLS cert of remote.domain.com, and pops a warning. It's this last step that I'd like to fix. Is there a config option in PowerShell, WMI, or .config to tell RDWeb/RemoteApp to use remote.domain.com for all published apps so the TLS cert for RDP matches what the Session Host is using? NOTE: This question talks about this issue, and this answer mentions how you might fix it in 2008, but that GUI doesn't exist in 2012 for RemoteApp, and I can't find a PowerShell setting for it. NOTE: Here's a screenshot of the setting in 2008R2 that I need to change. It tells RemoteApp what to use for the Session Host server name. How can I set that in 2012?

  Read the article

• VMWare Fusion: "No Permission to access this virtual machine"

  - by Craig Walker

  I had a VMWare Fusion VM backed up on my home network file server (Ubuntu). I wanted to run it again, so I copied it back to my Macbook. When I tried to launch it in VMWare, I got an error message: No permission to access this virtual machine. Configuration file: /Users/craig/WinXP Clean + Scanner.vmwarevm/WinXP Pro Test.vmx The permissions look fine to me: The bundle directory is 777 The bundle files (including the listed .vmx) are all 666 User is craig (my current user); group is staff. I changed the group to wheel at the suggestion of this page, but that didn't help. Finder shows read & write for craig, staff, and everyone on the bundle directory The bundle dir is also not locked Finder also shows rw and unlocked for the .vmx file The parent directory is also rw & unlocked Disk Utility permissions check doesn't show any problems with any of the associated files It sure looks like I should have wide open access to run this VM; why is Fusion complaining?

  Read the article

• Making the iPhone work with stripped down Windows XP

  - by Gabriel

  Hi, this is my first time posting here and I have a really specific question. I have an ASUS eee 901 running Windows XP Home. I had everything working well, but then I decided to improve performance by moving Windows to the smaller but faster internal SSD. I used Nlite to strip down Windows, following the instructions here: http://wiki.eeeuser.com/howto:nlitexp I now have a very lightweight installation of XP home with SP3 and all the current updates. Almost everything is working really well. I have installed iTunes and I CAN sync with no problems. However, each time I plug in my iPhone 3GS (latest firmware), Windows tries and fails to install drivers. The Found New Hardware Wizard launches, but nothing I do will make it complete successfully, with the result that the iphone does not show up in Windows as removable storage, or as a camera. When I launch the Camera and Scanner Wizard, it shows only my webcam, not the iphone. I have verified that I have the following files in place: Windows\System32\ptpusb.dll (regsvr32 successful) Windows\System32\ptpusd.dll (entry point not found, can not be registered) Windows\System32\usbaaplrc.dll (entry point not found, can not be registered) Windows\System32\drivers\usbaapl.sys Windows\System32\drivers\usbscan.sys Windows\System32\drivers\usbstor.sys Does anyone know if some other file is required or if there's some other element preventing this from working? Edit (From posted answer) I did select Cameras & Camcorders, and my webcam is working fine for video & still capture.

  Read the article

• Virtualbox HTTP load testing, host CPU overload issues

  - by aschuler

  I'm doing HTTP load testing benchmarks (using Apache Benchmark and Siege) on a small Java EE 1.7.0 / Tomcat 7.0.26 application running on a Debian Squeeze 6.0.4 x64 virtualized with Virtualbox 4.1.8. The computer host is Ubuntu 11.10 x64. I've modified those parameters in the Tomcat server.xml : <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="200000" redirectPort="8443" acceptCount="2000" maxThreads="150" minSpareThreads="50" /> The application executed on the server takes around 300ms. This app is running well until a certain amount of concurrent connections like those one : ab -n 500 -c 150 http://xx.xx.xx.xx:8080/myapp/ ab -n 1000 -c 50 http://xx.xx.xx.xx:8080/myapp/ siege -b -c 100 -r 20 http://xx.xx.xx.xx:8080/myapp/ A lot of socket connection timed out happens and this completly overload the host processor (but the CPU load inside the VM is normal). Doing an htop on the host, i can see that the Virtualbox processus is running under 300% CPU and never come down even after the load test is finished. (I've allocated 4 processors to the VM, if I allocate only one processor, CPU load goes under 100%). Restarting Tomcat don't do anything, i'm forced to restart the whole VM. I've tryed to launch those ab/siege commands locally on the VM and everything goes well. I first thought it was related to a linux network limit as explained here: Running some benchmarks using ab, and tomcat starts to really slow down So I've modified those TCP parameters : echo 15 > /proc/sys/net/ipv4/tcp_fin_timeout echo 30 > /proc/sys/net/ipv4/tcp_keepalive_intvl echo 1 > /proc/sys/net/ipv4/tcp_tw_recycle echo 1 > /proc/sys/net/ipv4/tcp_tw_reuse It seems to be better, but it continues to overload the host CPU and output socket connections time out at a certain amount of concurrent connections. I'm wondering if this is not related to how Virtualbox handles external concurrent connections.

  Read the article

• Hosting a javascript api file for third party sites the way sharethis, uservoice, analytics do it.

  - by Dayson

  I'm preparing to launch a service soon which will provide third party websites a widget. The widget requires my javascript file in the website's code. Exactly the same way services like analytics, uservoice, sharethis, getclicky, etc provide you with a javascript snippet to add to your page. Therefore, my javascript file is going to be hotlinked by tons of websites which possibly receive a lot of requests too. I need advice/opinions on the following aspects: What's the right location for hosting this file? Should I use a sub-domain for it? I was thinking of something like http://api.myservice.com/js/foo.js . Remember, once websites start embedding this file, its location CANNOT change under any circumstances. Right now we can afford just one dedicated server. So I have minified my file, enabled gzip and plan to use some good cache control headers through apache. Also, in the near future when the requests pickup, I will use a http proxy like Varnish. Is this a good plan for the near future? Should I be considering a CDN in the future (since we can't afford it now)? If so how do I make sure we're prepared to migrate to it without breaking services. Pros/Cons of moving just this file to a CDN? Also, since its just one javascript file(50kb), any affordable CDN so we could consider it in the beginning itself? Any other word of advice I could use? Anything I shouldn't overlook at this stage which I would regret later? (both in terms of server + javascript ajax limitations) Thanks in advance.

  Read the article

• Drobo FS vs. MacBook Pro: Finder works, Drobo Dashboard doesn't

  - by dash-tom-bang

  Does anyone have any experience with the new Drobo FS, specifically using it from a MacBook Pro? My experience thus far is this: Set up the Drobo Dashboard software (hereinafter called simply 'Dashboard') on my WinXP machine, which is hard-wired to the network to do the data migration from my NAS-that's-being-replaced (a 250G SimpleShare which works well enough but I was always afraid of losing the one disk). The Dashboard seems to work ok, except that the DroboCopy function doesn't work at all. This is the backup solution, which I can configure, and if I launch it (e.g. to back up from the old NAS to the Drobo) it spins the NAS, seeking the drive all over hell and creation, until finally giving up an hour+ later with zero files copied. Selecting only a subset of the data yields the same effect albeit more quickly. On my Mac I installed the Dashboard software too, since most of my fiddling with the device will be from my couch in the living room. Finder connects to the box just fine, fwiw, but Dashboard just sits there, "waiting for connection." This is considerably more bothersome than the above paragraph, but I figured I'd give whatever information I have. Drobo is insisting that I send them this "Debug Log" file that their software generates. Does anyone know what's in it? It's encrypted and they won't tell me, which spooks me just a bit; not like I'm terribly concerned about privacy but I don't want to be sending personal information out to every clown who says they "need" it in order to help me. thanks a ton, -tom!

  Read the article

• How to Move SMS from iPhone to Mac?

  - by seda16

  SMS is the main form to Communicate with others, you would saved many messages on your iPhone. Well, there're many reasons you need to backup your iPhone sms to the Mac. For example, your family or friends have sent you some important and you want to save them on your iPhone in case you delete them by accident, or you just need to backup your sms for other use. So today let's talk about how to move sms from iPhone to Mac. It would be very easy if you use an app to help you, I always use the iPhone to Mac transfer on Amacsoft to copy sms from iPhone to Mac. Now let me tell you how to use this great app: Step 1:Connect iPhone to Mac First of all, you need to install and launch the iPhone to Mac transfer, then connect your iPhone to Mac. The iPhone to Mac transfer would recognise your iPhone automatically. And all information of your iPhone will be shown on an interface. Step 2:Select sms and Start the Export Now you can see many choice on the left, find "SMS" and click it, all sms on your iPhone will be listed on the right. Select and check those you want to move, then just click "Export" on the top to start the transfer. Wait just a few a minute the transfer will be done. Great! You have finish the transfer now, it's really very easy, right? I believe it won't be a problem if you want to transfer your sms from iPhone to Mac. By the way you can also use this Amacsoft iPhone to Mac transfer to move other kind of files , like photos, songs etc. If you're a windows user, you can use iPhone to PC transfer on this web to move sms from iPhone to your PC just with the same steps, good luck!

  Read the article

• Hyper-V Guests Dying

  - by Jon Rauschenberger

  I just hit my THIRD instance of a Hyper-V guest machine dying with the exact same behavior. In all three instances we are hosting WS2008 guests on a WS2008 host. AFter a config change, we reboot the guest and the guest OS comes up but in a very cripled state. Specifically, we are able to log into the guest, but can't launch any apps and the guest never comes active on the network. I opened a support ticket with MS the second time this happened and they focused in on the DCOM subsystem not coming up...best explanation they could provide was that permissions on key system files got corrupted. I eventually gave up on the ticket after close to 10 hours on the phone trying different things that were going no where. What really concerns me is that we have now seen the exact same thing happen to a guest hosted on a completly differet host machine. There is zero hardware overlap between the two. Has anyone seen this before?? It's really odd behavior, but it also seems like there's a pattern here that's concerning me. Thanks, jon

  Read the article

• How to run Android-x86 project's ISO in VirtualBox with ethernet?

  - by Shiki

  I managed to find a way just days ago, but I had to leave my other PC and now I have no clue how to get it working again. Basically you have to get the image, then install it in a VirtualBox guest. Now the problem is ... when you launch your VM, there is no internet connection. No with NAT or Bridged. Tried all the network cards too. Since internet connection is crucial for Android development, I have to get this thing working. (As I said, I managed to fix it once.) I'm using: - The 4.0 RC1 images from Android-x86 - VirtualBox - Eclipse 4.2 Juno with the latest Android ADT - Android SDK v18 - upgraded to 19 via the Package manager. Now I seen a lot of different builds on the net, about different Android builds for VirtualBox. I have checked Buildroid for example, but there is no network connection. I have imported the virtual machine just as the howto said. The extension package is also installed and it's up to date.

  Read the article

• Failed to open the Parallels networking module

  - by user49204

  I'm running Parallels Desktop 7 on OSX Lion and encounter the issue in the subject on every time I'm trying to launch Parallels VM. The error message contains a hint to restore to network configuration default which does not help. As been advised by some forums to ran the following script: sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_hypervisor.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_hid_hook.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_usb_connect.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_vnic.kext" The output of: sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext" is: Diagnostics for /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext: Warnings: The booter does not recognize symbolic links; confirm these files/directories aren't needed for startup: /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeDirectory /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeRequirements /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeResources /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeSignature Dependency Resolution Failures: No kexts found for these libraries: com.parallels.kext.prl_hypervisor I've noticed that prl_netbridge is not being loaded (when I'm trying to unload it, I'm notified it is not loaded). Am I doing something wrong? What can be the reason for such behaviour?

  Read the article

• Rebooting access point via SSH with pexpect... hangs. Any ideas?

  - by MiniQuark

  When I want to reboot my D-Link DWL-3200-AP access point from my bash shell, I connect to the AP using ssh and I just type reboot in the CLI interface. After about 30 seconds, the AP is rebooted: # ssh [email protected] [email protected]'s password: ******** Welcome to Wireless SSH Console!! ['help' or '?' to see commands] Wireless Driver Rev 4.0.0.167 D-Link Access Point wlan1 -> reboot Sound's great? Well unfortunately the ssh client process never exits, for some reason (maybe the AP kills the ssh server a bit too fast, I don't know). My ssh client process is completely blocked (even if I wait for several minutes, nothing happens). I always have to wait for the AP to reboot, then open another shell, find the ssh client process ID (using ps aux | grep ssh) then kill the ssh process using kill <pid>. That's quite annoying. So I decided to write a python script to reboot the AP. The script connects to the AP's CLI interface via ssh, using python-pexpect, and it tries to launch the "reboot" command. Here's what the script looks like: #!/usr/bin/python # usage: python reboot_ap.py {host} {user} {password} import pexpect import sys import time command = "ssh %(user)s@%(host)s"%{"user":sys.argv[2], "host":sys.argv[1]} session = pexpect.spawn(command, timeout=30) # start ssh process response = session.expect(r"password:") # wait for password prompt session.sendline(sys.argv[3]) # send password session.expect(" -> ") # wait for D-Link CLI prompt session.sendline("reboot") # send the reboot command time.sleep(60) # make sure the reboot has time to actually take place session.close(force=True) # kill the ssh process The script connects properly to the AP (I tried running some other commands than reboot, they work fine), it sends the reboot command, waits for one minute, then kills the ssh process. The problem is: this time, the AP never reboots! I have no idea why. Any solution, anyone?

  Read the article

• "Run As Administrator" on program right click failing and not launching program

  - by GONeale

  This problem lies within a relatively fresh x64 Windows 7 install ~4 weeks, but is also a problem I have seen on Windows Vista machines (x86 versions). Since the other day, any programs attempted to be launched via right clicking on a shortcut (.lnk)'s context menu and pressing - "Run As Administrator" for instance, in the Quick Launch/Jump List in Windows 7 has failed, screen has not dimmed, no UAC popup. In fact the program does not even load. There is no way around this unless I use the shortcut version from "All Programs" which appears to work, very strange? I have performed no major software installs, nothing out of the ordinary. Has anybody encountered this or know what would be causing it? Here's an example of somebody else experiencing this problem in Vista with no solution: http://www.vistax64.com/vista-general/131918-strange-run-administrator-problem.html and I believe this problem is related, I also cannot right click - "Manage" on my computer): http://windows7forums.com/windows-7-support/5501-run-administrator-broken.html I am running the latest version of Avira AntiVir Virus Scanner and pretty concious of what I download, I don't think it is a virus, nor do I believe it is due to the RC Version of Windows 7, because I have seen the problem across multiple Operating Systems versions. Thanks guys.

  Read the article

• Environment variables in bash_profile or bashrc?

  - by Viriato

  I have found this question [blog]: Difference between .bashrc and .bash_profile very useful but after seeing the most voted answer (very good by the way) I have further questions. Towards the end of the most voted, correct answer I see the statement as follows : Note that you may see here and there recommendations to either put environment variable definitions in ~/.bashrc or always launch login shells in terminals. Both are bad ideas. Why is it a bad idea (I am not trying to fight, I just want to understand)? If I want to set an environment variable and add it to the PATH (for example JAVA_HOME) where it would be the best place to put the export entry? in ~/.bash_profile or ~/.bashrc? If the answer to question number 2 is ~/.bash_profile, then I have two further questions: 3.1. What would you put under ~/.bashrc? only aliases? 3.2. In a non-login shell, I believe the ~/.bash_profile is not being "picked up". If the export of JAVA_HOME entry was in bash_profile would I be able to execute javac & java commands? Would it find them on the PATH? Is that the reason why some posts and forums suggest setting JAVA_HOME and alike to ~/.bashrc? Thanks in advance.

  Read the article

• Create App_Data and register Excel application on ASP.NET deployment? (IIS7.5)

  - by Francesco

  I am deploying an ASP.NET MVC3 application in IIS7. I already deployed other applications but they never made use of the App_Data folder or any additional component such as the Interop library. I used the one click deployement and I sue the default application pool. When I launch the application I immediately get an error stating: [web access] Sorry, an error occurred while processing your request. [browse from IIS7] Could not find a part of the path 'D:\Data\Apps\OppUpdate\App_Data\Test.xlsx'. Then I manually added the App_Data folder inside the deployment directory and the application starts regularly. Then when it comes to the taks that uses the Interop library, I get the following error: [web access] Sorry, an error occurred while processing your request. [browse from IIS7] Retrieving the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). Is there any way to automatically add the App_Data folder when using 1 click deploy? How can I register the Interop services? Thanks you, Francesco

  Read the article

• Installing GitHub for Mac - "Github cannot be opened because of a probem"

  - by betitall

  I'm trying to get started using Git for Mac, but I receive an error when I try to run the program. I'm new to GitHub and relatively new to Mac. First, I installed Git using the downloadable .dmg file named "git-1.7.12.3-intel-universal-snow-leopard". I ran the .pkg file contained therein and the install seemed to work fine. I'm using a new macbook pro w/ retina. Then I downloaded the Github for Mac installer, "mac_GitHub for Mac 69.zip". When I double-click the file, it shows that there is a single file of type "Application". Double-clicking that application file produces the error: "GitHub cannot be opened because of a problem". Here are the partial details of that error: Application Specific Information: dyld: launch, loading dependent libraries Dyld Error Message: Library not loaded: @executable_path/../Frameworks/Rebel.framework/Rebel Referenced from: /Applications/GitHub.app/Contents/MacOS/GitHub Reason: no suitable image found. Did find: /Applications/GitHub.app/Contents/MacOS/../Frameworks/Rebel.framework/Rebel: file too short /Applications/GitHub.app/Contents/MacOS/../Frameworks/Rebel.framework/Rebel: file too short Any help would be much appreciated. Thanks.

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >