Search Results

Search found 12681 results on 508 pages for 'logical drive'.

Page 114/508 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

  • How to format my external HDD back to as "removable storage"?

    - by user990106
    Recently I formated my Seagate FreeAgent GoFlex external HDD in Mac OS X using GUID partition table since I wanted to install another Mac OS X onto that external HDD. However I changed my mind after my external HDD being formatted. Now I want to format my external HDD back to NTFS so that I can use it with my Windows 7. However, after I connected my external HDD via USB it didn't show up in my "computer" so I used "Disk Management" to check what's wrong with it. In the "Disk Management" I saw that there was one partition of my external HDD called "EFI partition" and I found that I could not delete this partition in the "Disk Management". So I tried to use "diskpart" in cmd and select the external HDD and commanded "clean". Then the EFI partition was gone and I created new volumn on that external HDD. However, after the volumn being created my external HDD did show up in my "computer" but it is in the "Hard Disk Drive" not in the "Devices with Removable Storage" as it used to be. I'm wondering if I can do anything to it to make it recognized as a "Devices with Removable Storage"?

    Read the article

  • Seeking faster access/transfer times for accounting application

    - by Markaway
    Our accounting software, Sage 50, has been getting slower to open on workstations and reading the company file. The company file only contains 2 years worth of transactions, and we just cleared out 2011 so the file size has gotten a lot smaller. There are 10 users, 6 of which are on it all day, 4 are on and off throughout the day. Our network is entirely GbE and the switches are set to prioritize traffic on that port number. Watching network traffic, we barely use 40% of the network capability on the workstation, so I don't think that is our bottleneck. Our server contains two older Raptors Sata 2(3GB/s) 150GB in RAID 1. We were considering switching to SSD's, but a lot of what I read says to stay away from MLC's, especially for production environment and definitely avoid putting them in a RAID config. So would upgrading to newer Raptors with SATA 3(6GB/s) offer noticable benefits? What other options are out there that aren't so expensive? Trying to keep it to 200-300 per drive. We need at least 150GB, but going to 250-300GB would be better as it gives us more room to grow. We have about 30% space remaining on what we have now.

    Read the article

  • Connecting to a network drive programmatically and caching credentials

    - by Chris Doggett
    I'm finally set up to be able to work from home via VPN (using Shrew as a client), and I only have one annoyance. We use some batch files to upload config files to a network drive. Works fine from work, and from my team lead's laptop, but both of those machines are on the domain. My home system is not, and won't be, so when I run the batch file, I get a ton of "invalid drive" errors because I'm not a domain user. The solution I've found so far is to make a batch file with the following: explorer \\MACHINE1 explorer \\MACHINE2 explorer \\MACHINE3 Then manually login to each machine using my domain credentials as they pop up. Unfortunately, there are around 10 machines I may need to use, and it's a pain to keep entering the password if I missed one that a batch file requires. I'm looking into using the answer to this question to make a little C# app that'll take the login info once and login programmatically. Will the authentication be shared automatically with Explorer, or is there anything special I need to do? If it does work, how long are the credentials cached? Is there an app that does something like this automatically? Unfortunately, domain authentication via the VPN isn't an option, according to our admin. EDIT: If there's a way to pass login info to Explorer via the command line, that would be even easier using Ruby and highline.

    Read the article

  • autoconf libtool library linker path incorrect (need drive-letter) for MinGW ld.exe in Cygwin

    - by Tam Toucan
    I use autoconf and when the target is mingw I was using the -mno-cygwin flag. This has been removed so I'm trying to using the mingw tool chain. The problem is the linker isn't finding my libraries /bin/sh ../../../libtool --tag=CXX --mode=link mingw32-g++ -g -Wall -pedantic -DNOMINMAX -D_REENTRANT -DWIN32 -I /usr/local/include/w32api -L/usr/local/lib/w32api -o testRandom.exe testRandom.o -L../../../lib/Random -lRandom libtool: link: mingw32-g++ -g -Wall -pedantic -DNOMINMAX -D_REENTRANT -DWIN32 -I /usr/local/include/w32api -o .libs/testRandom.exe testRandom.o -L/usr/local/lib/w32api -L/home/Tam/src/3DS_Games/lib/Random -lRandom D:\cygwin\opt\MinGW\bin\..\lib\gcc\mingw32\3.4.5\..\..\..\..\mingw32\bin\ld.exe: cannot find -lRandom To link this from the command line using the mingw linker the -L path needs the drive letter i.e mingw32-ld testRandom.o -LD:/home/Tam/src/3DS_Games/lib/Random -lRandom works. The -L path is generated from the makefile.am's which have LDADD = -L$(top_builddir)/lib/Random -lRandom However I can't find how to set top_builddir to a relative path or to start it with the drive letter (my autoconf skills are weak). As a tempoary "solution" I have removed the use of libtool. I could hack a $(DRIVE_LETTER) infront of every -L option, but I'd like to find something better.

    Read the article

  • Querying the size of a drive on a remote server is giving me an error

    - by Testifier
    Here's what I have: public static bool DriveHasLessThanTenPercentFreeSpace(string server) { long driveSize = 0; long freeSpace = 0; var oConn = new ConnectionOptions {Username = "username", Password = Settings.Default.SQLServerAdminPassword}; var scope = new ManagementScope("\\\\" + server + "\\root\\CIMV2", oConn); //connect to the scope scope.Connect(); //construct the query var query = new ObjectQuery("SELECT FreeSpace FROM Win32_LogicalDisk where DeviceID = 'D:'"); //this class retrieves the collection of objects returned by the query var searcher = new ManagementObjectSearcher(scope, query); //this is similar to using a data adapter to fill a data set - use an instance of the ManagementObjectSearcher to get the collection from the query and store it ManagementObjectCollection queryCollection = searcher.Get(); //iterate through the object collection and get what you're looking for - in my case I want the FreeSpace of the D drive foreach (ManagementObject m in queryCollection) { //the FreeSpace value is in bytes freeSpace = Convert.ToInt64(m["FreeSpace"]); //error happens here! driveSize = Convert.ToInt64(m["Size"]); } long percentFree = ((freeSpace / driveSize) * 100); if (percentFree < 10) { return true; } return false; } This line of code is giving me an error: driveSize = Convert.ToInt64(m["Size"]); The error says: ManagementException was unhandled by user code Not found I'm assuming the query to get the drive size is wrong. Please note that I AM getting the freeSpace value at the line: freeSpace = Convert.ToInt64(m["FreeSpace"]); So I know the query IS working for freeSpace. Can anyone give me a hand?

    Read the article

  • Boost Netbook Speed with an SD Card & ReadyBoost

    - by Matthew Guay
    Looking for a way to increase the performance of your netbook?  Here’s how you can use a standard SD memory card or a USB flash drive to boost performance with ReadyBoost. Most netbooks ship with 1Gb of Ram, and many older netbooks shipped with even less.  Even if you want to add more ram, often they can only be upgraded to a max of 2GB.  With ReadyBoost in Windows 7, it’s easy to boost your system’s performance with flash memory.  If your netbook has an SD card slot, you can insert a memory card into it and just leave it there to always boost your netbook’s memory; otherwise, you can use a standard USB flash drive the same way. Also, you can use ReadyBoost on any desktop or laptop; ones with limited memory will see the most performance increase from using it. Please Note:  ReadyBoost requires at least 256Mb of free space on your flash drive, and also requires minimum read/write speeds.  Most modern memory cards or flash drives meet these requirements, but be aware that an old card may not work with it. Using ReadyBoost Insert an SD card into your card reader, or connect a USB flash drive to a USB port on your computer.  Windows will automatically see if your flash memory is ReadyBoost capable, and if so, you can directly choose to speed up your computer with ReadyBoost. The ReadyBoost settings dialog will open when you select this.  Choose “Use this device” and choose how much space you want ReadyBoost to use. Click Ok, and Windows will setup ReadyBoost and start using it to speed up your computer.  It will automatically use ReadyBoost whenever the card is connected to the computer. When you view your SD card or flash drive in Explorer, you will notice a ReadyBoost file the size you chose before.  This will be deleted when you eject your card or flash drive. If you need to remove your drive to use elsewhere, simply eject as normal. Windows will inform you that the drive is currently being used.  Make sure you have closed any programs or files you had open from the drive, and then press Continue to stop ReadyBoost and eject your drive. If you remove the drive without ejecting it, the ReadyBoost file may still remain on the drive.  You can delete this to save space on the drive, and the cache will be recreated when you use ReadyBoost next time. Conclusion Although ReadyBoost may not make your netbook feel like a Core i7 laptop with 6GB of RAM, it will still help performance and make multitasking even easier.  Also, if you have, say, a memory stick and a flash drive, you can use both of them with ReadyBoost for the maximum benefit.  We have even noticed better battery life when multitasking with ReadyBoost, as it lets you use your hard drive less.  SD cards and thumb drives are relatively cheap today, and many of us have several already, so this is a great way to improve netbook performance cheaply. Similar Articles Productive Geek Tips Speed up Your Windows Vista Computer with ReadyBoostSet the Speed Dial as the Opera Startup PageAsk the Readers: What are Your Computer’s Hardware Specs?Understanding Windows Vista Aero Glass RequirementsReplace Google Chrome’s New Tab Page with Speed Dial TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Recycle ! Find That Elusive Icon with FindIcons Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems

    Read the article

  • help: cannot make ubuntu 64-bit v12.04 install work

    - by honestann
    I decided it was time to update my ubuntu (single boot) computer from 64-bit v10.04 to 64-bit v12.04. Unfortunately, for some reason (or reasons) I just can't make it work. Note that I am attempting a fresh install of 64-bit v12.04 onto a new 3TB hard disk, not an upgrade of the 1TB hard disk that has contained my 64-bit v10.04 installation. To perform the attempted install of v12.04 I unplug the SATA cable from the 1TB drive and plug it into the 3TB drive (to avoid risking damage to my working v10.04 installation). I downloaded the ubuntu 64-bit v12.04 install DVD ISO file (~1.6 GB) from the ubuntu releases webpage and burned it onto a DVD. I have downloaded the DVD ISO file 3 times and burned 3 of these installation DVDs (twice with v10.04 and once with my winxp64 system), but none of them work. I run the "check disk" on the DVDs at the beginning of the installation process to assure the DVD is valid. I also tried to install on two older 250GB seagate drives in the same computer. During every attempt I plug the same SATA cable (sda) into only one disk drive (the 3TB or one of the 250GB drives) and leave the other disk drives unconnected (for simplicity). Installation takes about 30 minutes on the 250GB drives, and about 60 minutes on the 3TB drive - not sure why. When I install on the 250GB drives, the install process finishes, the computer reboots (after the install DVD is removed), but I get a grub error 15. It is my understanding that 64-bit ubuntu (and 64-bit linux in general) has no problem with 3TB disk drives. In the BIOS I have tried having EFI set to "enabled" and "auto" with no apparent difference (no success). I have tried partitioning the drive in a few ways to see if that makes a difference, but so far it has not mattered. Typically I manually create partitions something like this: 8GB swap 8GB /boot ext4 3TB / ext4 But I've also tried the following, just in case it matters: 100MB boot efi 8GB swap 8GB /boot ext4 3TB / ext4 Note: In the partition dialog I specify bootup on the same drive I am partitioning and installing ubuntu v12.04 onto. It is a VERY DANGEROUS FACT that the default for this always comes up with the wrong drive (some other drive, generally the external drive). Unless I'm stupid or misunderstanding something, this is very wrong and very dangerous default behavior. Note: If I connect the SATA cable to the 1TB drive that has been my ubuntu 64-bit v10.04 system drive for the past 2 years, it boots up and runs fine. I guess there must be a log file somewhere, and maybe it gives some hints as to what the problem is. I should be able to boot off the 1TB drive with the 3TB drive connected as a secondary (non-boot) drive and get the log file, assuming there is one and someone tells me the name (and where to find it if the name is very generic). After installation on the 3TB drive completes and the system reboots, the following prints out on a black screen: Loading Operating System ... Boot from CD/DVD : Boot from CD/DVD : error: unknown filesystem grub rescue Note: I have two DVD burners in the system, hence the duplicate line above. The same install and reboot on the 250GB drives generates "grub error 15". Sigh. Any ideas? ========== motherboard == gigabyte 990FXA-UD7 CPU == AMD FX-8150 8-core bulldozer @ 3.6 GHz RAM == 8GB of DDR3 in 2 sticks (matched pair) HDD == seagate 3TB SATA3 @ 7200 rpm (new install 64-bit v12.04) HDD == seagate 1TB SATA3 @ 7200 rpm (current install 64-bit v10.04) GPU == nvidia GTX-285 ??? == no overclocking or other funky business USB == external seagate 2TB HDD for making backups DVD == one bluray burner (SATA) DVD == one DVD burner (SATA) The current ubuntu 64-bit v10.04 system boots and runs fine on a seagate 1TB.

    Read the article

  • ESXi hard drive power saving

    - by Jens
    I currently have a Windows Server running beneath my desk and was considering replacing it with a ESXi layer to run both a Windows and Unix virtual machine. The ESXi is going to give me some nice advantages that I can use but I am still stuck on this issue: The server is mainly used as a fileserver/local webserver, and I use Windows tasks to hibernate/wake the machine at night. Also there is an aggressive disk spin down timeout to reduce noise. With ESXi, this will not be possible to do any more. I could live with the server running 24/7, but I would really like to spin down the disks when not in use. Is there a way to do this on ESXi?

    Read the article

  • Using Linux LVM, can I change the number of stripes and "rebalance" the logical volume?

    - by mss
    I created a RAID10 by adding two RAID1 md devices as physical volumes to a volume group. Unfortunately it looks like I forgot to specify the number of stripes when I created the logical volumes (it was late): PV VG Fmt Attr PSize PFree /dev/md312 volume lvm2 a- 927.01G 291.01G /dev/md334 volume lvm2 a- 927.01G 927.01G I know that I can move all the data of a logical volume from one physical volume to another with pvmove. It also looks like lvextend supports an -i switch to change the number of stripes. Is there any way to combine these two, ie. change the number of stripes and "rebalance" the data over the stripes based on the allocation policy? According to this mail by Ross Walker from March 2010 it isn't possible but maybe this has changed since then.

    Read the article

  • Ubuntu mount hard drive confusing

    - by Fresheyeball
    I'm new to linux and have a home server set up running ubuntu. In the ui its very easy to mount my additional internal harddrives. I just double click on them. Since I have made this server headless, I now need to mount via the command line. How can I replicate the very simple double click gui behavior? So far all the information I've found is very complex. Ubuntu auto generated folders for each hd in under /media and I can see the harddrives under /dev but have no idea which is which as the hardware is identical between them. I also don't know how they are formated. Thanks in advance for any advice you have.

    Read the article

  • Install Oracle Drive and TNS for Windows XP?

    - by David.Chu.ca
    I am building a box with Windows XP with some applications. One application requires connection to an Oracle database on remote. I have installed OracleXEClient.exe from Oracle download. The installation does install "Oracle Provider for OLE DB" driver. My problem is that I still cannot make connections to the remote Oracle db. The test I have done is to create a UDL file with Oracle provider OLE DB connection. The error message is: --------------------------- Microsoft Data Link Error --------------------------- Test connection failed because of an error in initializing provider. ORA-12154: TNS:could not resolve the connect identifier specified I think I may miss TNSNAMEC.ora in the box. I can find this file from another box where Oracle connection works fine. I am not sure what package I should install (from Oracle) so that the default TNSNAEMES.ora will be installed with related files and setup path for accessing the TNS file?

    Read the article

  • Get-ChildItem fails to connect in SQLSERVER drive

    - by Norman Kelm
    I'm having some trouble with the SQLSERVER PSDRIVE. See error below. I only have named instances on my PC, both 2005 and 2008 Added the SQL snapins. The PC is named YODA The SQL instance is SQL2008 Navigate to the Databases folder for YODA\SQL2008. You can see the path below. dir -name spits out a connection error trying to connect to YODASQL2008\DEFAULT when it should be trying to connect to YODA\SQL2008. Then it outputs the db name which is Twitter in this case. Is there something missing from my config? Output: PS SQLSERVER:\SQL\YODA\SQL2008\Databases dir -name Get-ChildItem : SQL Server PowerShell provider error: Could not connect to 'YODASQL2008\DEFAULT'. [Failed to connect to server YODASQL2008. -- A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)] At line:1 char:4 + dir <<<< -name + CategoryInfo : OpenError: (SQLSERVER:\SQL\...tabases\Twitter:SqlPath) [Get-ChildItem], GenericProviderException + FullyQualifiedErrorId : ConnectFailed,Microsoft.PowerShell.Commands.GetChildItemCommand Twitter Repeats with error for every database. Thanks, Norman

    Read the article

  • Can't copy files with 'additional permissions' to ext4 drive -- files that have @ after permissions,

    - by 99miles
    I am copying files from Snow Leopard to a mounted ext4 share via Samba, that's on a Fedora machine. Some files cannot be copied, and give this error: The operation can’t be completed because you don’t have permission to access some of the items. I've noticed that the files that can't be copied have an @ at the end of their permissions whien I do 'ls -l' in the command line. For example, I can copy the second file but not the first: -rwxrwxrwx@ 1 miles staff 1448 May 14 22:55 test.txt -rw-r--r-- 1 miles staff 136 Apr 5 17:06 image.psd.zip From what I've found, the @ means the file has 'additional properties'. Does anyone know how I can resolve this issue so I can copy the files to the fileshare?? Thanks!

    Read the article

  • Remote NX login to Ubuntu, Gnome can't mount CD/DVD drive

    - by T.J. Crowder
    Even though I'm sitting next to it, I log into my Ubuntu 10.04 LTS system via NX Free Edition from another system at the moment (this is temporary, not worth buying a KVM for). Curiously, though, when I do that Gnome's auto-mounting fails for CD/DVD media (I haven't tried other kinds) with a "Not Authorized" error. For instance here's what happens when I put the Ubuntu 10.04 LTS installation CD in: This does not happen if I log into it locally (not via NX) with the same user account. When using NX, I can mount the media if I go to mount directly: tjc@midnight:~$ sudo mkdir /media/dvd tjc@midnight:~$ sudo mount -r -t iso9660 /dev/sr0 /media/dvd tjc@midnight:~$ ls /media/dvd autorun.inf casper dists install isolinux md5sum.txt pics pool preseed README.diskdefines ubuntu wubi.exe ...which, along with the "not authorized" error, suggests some kind of permissions problem to me (doh). What I find odd is that the same user is involved in both cases (local and via NX). I'm new to Ubuntu on the desktop (used it and other distros on servers for years), so I'm afraid I don't know how this auto-mounting is happening. I think it's handled by the gvfs package and its daemon, but that's about as far as I got (and perhaps I've taken a left turn even getting that far). Although I can work around it with mount, does anyone know how I might get auto-mounting to work?

    Read the article

  • Why is this LTO4 Tape-drive not working

    - by Tim Haegele
    # modprobe mptsas # dmesg [ 4274.796796] scsi target7:0:0: mptsas: ioc1: delete device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4274.939579] mptsas 0000:01:00.0: PCI INT A disabled [ 4280.934531] Fusion MPT SAS Host driver 3.04.12 [ 4280.934552] mptsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4280.934692] mptbase: ioc2: Initiating bringup [ 4281.490183] ioc2: LSISAS1064E B3: Capabilities={Initiator} [ 4281.490203] mptsas 0000:01:00.0: setting latency timer to 64 [ 4293.555274] scsi8 : ioc2: LSISAS1064E B3, FwRev=011e0000h, Ports=1, MaxQ=277, IRQ=16 [ 4293.574906] mptsas: ioc2: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4293.576471] scsi 8:0:0:0: Sequential-Access IBM ULTRIUM-HH4 B6W1 PQ: 0 ANSI: 6 [ 4293.578549] st 8:0:0:0: Attached scsi tape st0 [ 4293.578550] st 8:0:0:0: st0: try direct i/o: yes (alignment 512 B) [ 4293.578577] st 8:0:0:0: Attached scsi generic sg5 type 1 # mt -f /dev/st0 status mt -f /dev/st0 status mt: /dev/st0: rmtopen failed: Input/output error # dd if=/dev/zero of=/dev/nst0 bs=1024 count=10 dd: opening `/dev/nst0': Input/output error I am running debian squeeze 2.6.32-5-amd64 #1 SMP Sun May 6 04:00:17 UTC 2012 x86_64 GNU/Linux Server is Fujitsu TX140 with Controller Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS Tape+Hardware is new.

    Read the article

  • Backing up VMs to a tape drive

    - by Aljoscha Vollmerhaus
    I've got myself one of these fancy tape drives, HP LTO2 with 200/400 GB cartridges. The st driver reports it like this: scsi 1:0:0:0: Sequential-Access HP Ultrium 2-SCSI T65D I can store and retrieve files like a charm using tar, both tar cf /dev/st0 somedirectory and tar xf /dev/st0 work flawless. However, what I really would like to backup are LVM LVs. They contain entire virtual machines with varying partition layouts, so using mount and tar is not an option. I've tried using something like dd if=/dev/VG/LV bs=64k of=/dev/st0 to achieve this, but there seem to be various problems associated with this approach. Firstly, I would like to be able to store more than 1 LV on a single tape. Now I guess I could seek to concatenate the data on the tape, but I think this would not work very well in an automated scenario with many different LVs of various sizes. Secondly, I would like to store a small XML file along with the raw data that contains some information about the VM contained in the LV. I could dump everything to a directory and tar it up - not very desirable, I would have to set aside huge amounts of scratch space. Is there an easier way to achieve this? Thirdly, from googling around it seems like it would be wise to use something like mbuffer when writing to the tape, to prevent what wikipedia calls "shoe-shining" the tape. However, I can't get anything useful done with mbuffer. The mbuffer man page suggests this for writing to a tape device: mbuffer -t -m 10M -p 80 -f -o $TAPE So I've tried this: dd if=/dev/VG/LV | mbuffer -t -m 10M -p 80 -f -d 64k -o /dev/st0 Note the added "-d 64k" to account for the 64k block size of the tape. However, reading data back from a tape written in this way never seems to yield any useful results - dd has been running for ages now, and managed to transfer only 361M of data from the tape. What's wrong here?

    Read the article

  • Disk drive disappear in Windows Explorer

    - by Stan
    OS: WinXP SP3 When pressing win+E or open Windows Explorer, under My Computer, usually there are several disk drives. But somehow they just disappeared. If I type c:\ in address bar, then the disk will re-appear in the tree though. How to get them back? Thanks.

    Read the article

  • Linux machine can't find its tape drive

    - by Kyle Hodgson
    I have an older HP NetServer LPr with what is apparently a Symbios SCSI card connecting to a Quantum SuperLoader 3 that is DLT based. From time to time, we seem to lose the connection to the autoloader. It's usually due to flaky power, but not totally sure why; sometimes when this happens the Autoloader's LED's are orange and it needs to be power cycled. The annoying workaround currently is to reboot the machine. As it is our production VPN and DNS server in addition to being our backup server, this is less than optimal. In Debian (Sarge) is there not some command one can type to get the card to notice that it has the autoloader connected again? dcr1:/proc# grep -i symbios /proc/pci SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 1). dcr1:/proc# uname -a Linux dcr1 2.4.27-3-686 #1 Tue Dec 5 21:03:54 UTC 2006 i686 GNU/Linux dcr1:/proc# mt status mt: /dev/tape: No such device dcr1:/proc# ls -l /dev/tape lrwxrwxrwx 1 root root 8 2007-02-07 16:01 /dev/tape -> /dev/st0 dcr1:/proc# That mt status command will show the actual st0 status when things are working correctly. The No such device message is usually the second clue that we need to reboot - the first clue is usually that the backups didn't run.

    Read the article

  • Make flash drive bootable with MULTIPLE Windows Installers

    - by alexander7567
    I have seen many ways to make a USB an installer for about any Windows OS. But how can I (using grub or something like that) make it bootable to all editions on Windows XP and 7? I have tried Googling it and researching, I've even tried to do it, But I dont understand much about GRUB or linux at all. Please keep in mind that I am not very good with linux, so please use as many details as possible.

    Read the article

  • Hardware issue: UI freezes and hard drive light goes solid several times per hour

    - by alchemical
    I have a workstation that has been acting up for the last few weeks. It currently has Windows Server 2008 R2 installed on it, and 2 HDD mirrored. A few times per hour the screen will freeze up, applications will say "not responding", sometimes the screen will turn a lighter shaded color--at the same time the HDD light is on solid. This lasts anywhere from 10 to about 50 seconds. Could this be something with one of the drives or the mechanism keeping the mirror in place? Any other ideas?

    Read the article

  • Moving new drive volume out of /media

    - by nomoreflash
    I have the following filesystem: Filesystem Size Used Avail Use% Mounted on /dev/sda1 33G 2.7G 29G 9% / udev 1007M 232K 1007M 1% /dev none 1007M 244K 1007M 1% /dev/shm none 1007M 292K 1007M 1% /var/run none 1007M 0 1007M 0% /var/lock none 1007M 0 1007M 0% /lib/init/rw none 33G 2.7G 29G 9% /var/lib/ureadahead/debugfs /dev/sdb1 137G 69M 137G 1% /media/New Volume I want the /media/New Volume to become part of /. Does anyone know how I can do that without using gparted etc.?

    Read the article

  • Something eating space on OS drive

    - by noquery
    I am facing low disk space issue from last few days. I checked with Restore,System Volume Information, $Recycled folders. But there is nothing which is occupying space. I had scanned my system for virus too. Total size of C: is 18 GB. But when I select all folders inside C: and query for used space, it shows 20+ gb space is used. I vacate space some how by deleting temp files, program's cache files, disk clean up etc up to (3 gb). And I ensured that no cache/temp files are recreated who can use the space again. Even after cleaning so much data, I am again facing low disk space issue. Something is eating disk space within 15-20 mins.

    Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >