Search Results

Search found 6654 results on 267 pages for 'socket io'.

Page 114/267 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• Hostapd - WLAN as AP

  - by BBK

  I'm trying to start hostapd but without success. I'm using Headless Ubuntu 11.10 oneiric 3.0.0-16-server x86_64. WLAN driver is rt2800usb and my wireless nic card TP-Link TL-WN727N supports AP mode as shows below: us0# ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:27:19:be:cd:b6 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) us0# lsusb Bus 003 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter us0# lshw -C network *-network:3 description: Wireless interface physical id: 4 bus info: usb@3:2 logical name: wlan0 serial: 00:27:19:be:cd:b6 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.0.0-16-server firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn us0# hostapd /etc/hostapd/hostapd.conf Configuration file: /etc/hostapd/hostapd.conf Could not read interface wlan0 # The int flags: No such device nl80211 driver initialization failed. ELOOP: remaining socket: sock=4 eloop_data=0xd3e4a0 user_data=0xd3ecc0 handler=0x433880 ELOOP: remaining socket: sock=6 eloop_data=0xd411f0 user_data=(nil) handler=0x43cc10 us0# cat /etc/hostapd/hostapd.conf ssid=Home interface=wlan0 # The interface name of the card #driver=rt2800usb driver=nl80211 macaddr_acl=0 ieee80211n=1 channel=1 hw_mode=g auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=88888888 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP us0# iw list Wiphy phy0 Band 1: Capabilities: 0x172 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI RX STBC 1-stream Max AMSDU length: 7935 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-7, 32 TX unequal modulation not supported HT TX Max spatial streams: 1 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) (passive scanning, no IBSS) * 2472 MHz [13] (20.0 dBm) (passive scanning, no IBSS) * 2484 MHz [14] (20.0 dBm) (passive scanning, no IBSS) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * Unknown command (68) * Unknown command (55) * Unknown command (57) * Unknown command (59) * Unknown command (67) * set_wiphy_netns * Unknown command (65) * Unknown command (66) * connect * disconnect The question is: Why the hostapd not starting?

  Read the article

• Voxel Engine in Multiplayer?

  - by Oliver Schöning

  This is a question more out of Interest for now, because I am not even near to the point that I could create this project at the moment. I really like the progress on the Atomontage Engine. A Voxel engine that is WIP at the moment. I would like to create a Voxel SERVER eventually. First in JavaScript (That's what I am learning right now) later perhaps in C++ for speed. Remember, I am perfectly aware that this is very hard! This is a brainstorm for the next 10 years as for now. What I would like to achieve one day is a Multiplayer Game in the Browser where the voxels positions are updated by XYZ input from the server. The Browser Does only 3 things: sending player input to the server, updating Voxel positions send from the server and rendering the world. I imagine using something like the Three.js libary on the client side. So that would be my programming dream right there... Now to something simpler for the near future. Right now I am learning javascript. And I am making games with Construct2. (A really cool JavaScript "game maker") The plan is to create a 2D Voxel enviorment (Block Voxels) on the Socket.IO Server* and send the position of the Voxels and Players to the Client side which then positions the Voxel Blocks to the Server Output coordinates. I think that is a bit more manageable then the other bigger idea. And also there should be no worries about speed with this type of project in JavaScript (I hope). Extra Info: *I am using nodejs (Without really knowing what it does besides making Socket.IO work) So now some questions: Is the "dream project" doable in JavaScript? Or is C++ just the best option because it does not take as long to be interpreted at run time like JavaScript? What are the limitations? I can think of some: Need of a Powerful server depending on how much information the server has to process. Internet Speed; Sending the data of the Voxel positions to every player could add up being very high! The browser FPS might go down quickly if rendering to many objects. One way of fixing reducing the packages Could be to let the browser calculate some of the Voxel positions from Several Values. But that would slow down the Client side too. What about the more achievable project? I am almost 100% convinced that this is possible in JavaScript, and that there are several ways of doing this. This is just XY position Updating for now.. Hope this did make some sense. Please comment if you got something to say :D

  Read the article

• Refresh banshee album art

  - by kmassada

  I usually just copy ~/.config/banshee-1, and ~/.gconf/apps/banshee-1 when i'm moving from one computer to the other, if I keep the path of the folders. I get to keep my music library intact with the playlists I have. The problem with this method is that, the album arts doesn't carry over nicely. You'd have to play every album to get the album art to appear. Anyone knows a workaround, to maybe force banshee to reload all album art? I saw this, but not quite what my issue is? I tried banshee --fetch-artwork, but didn't work too well kenneth@dv7:~$ banshee --fetch-artwork [Warn 11:23:38.200] DBus support could not be started. Disabling for this sessi on. - System.Exception: Error 111: Connection refused (in `dbus-sharp') at DBus.Unix.UnixSocket.Connect (System.Byte[] remote_end) [0x00000] in <filen ame unknown>:0 at DBus.Transports.UnixNativeTransport.OpenAbstractUnix (System.String path) [ 0x00000] in <filename unknown>:0 at DBus.Transports.UnixNativeTransport.Open (System.String path, Boolean abstr act) [0x00000] in <filename unknown>:0 at DBus.Transports.UnixTransport.Open (DBus.AddressEntry entry) [0x00000] in < filename unknown>:0 at DBus.Transports.Transport.Create (DBus.AddressEntry entry) [0x00000] in <fi lename unknown>:0 at DBus.Connection.OpenPrivate (System.String address) [0x00000] in <filename unknown>:0 at DBus.Connection..ctor (System.String address) [0x00000] in <filename unknow n>:0 at DBus.Bus..ctor (System.String address) [0x00000] in <filename unknown>:0 at DBus.Bus.Open (System.String address) [0x00000] in <filename unknown>:0 at DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 System.Exception: Unable to open the session message bus. (in `dbus-sharp') at DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 at DBus.BusG.Init () [0x00000] in <filename unknown>:0 at Banshee.ServiceStack.DBusConnection.Connect (System.String serviceName, Boo lean init) [0x00000] in <filename unknown>:0 at Banshee.ServiceStack.DBusConnection.GrabDefaultName () [0x00000] in <filena me unknown>:0 [Info 11:23:38.286] Running Banshee 2.6.0: [Ubuntu 12.10 (linux-gnu, x86_64) @ 2012-10-11 06:19:37 UTC] (Banshee:21865): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Failed to connect to socket /tmp/dbus-vLxS6Riwsn: Connection refused [Warn 11:23:38.948] Could not read GConf key core.send_anonymous_usage_data - G Lib.GException: No D-BUS daemon running (in `gconf-sharp') at GConf.Client.Get (System.String key) [0x00000] in <filename unknown>:0 at Banshee.GnomeBackend.GConfConfigurationClient.TryGet[Boolean] (System.Strin g namespace, System.String key, System.Boolean& result) [0x00000] in <filename u nknown>:0 (Banshee:21865): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Failed to connect to socket /tmp/dbus-vLxS6Riwsn: Connection refused [Warn 11:23:39.239] Could not read GConf key core.send_anonymous_usage_data - G Lib.GException: No D-BUS daemon running (in `gconf-sharp') at GConf.Client.Get (System.String key) [0x00000] in <filename unknown>:0 at Banshee.GnomeBackend.GConfConfigurationClient.TryGet[Boolean] (System.Strin g namespace, System.String key, System.Boolean& result) [0x00000] in <filename u nknown>:0

  Read the article

• Friendly Purchase Suggestions - DELL XPS M1330(PA10) Laptop Computer Power Supply

  DELL XPS M1330 Series Laptop Computer PC charger is defective; consider few tips here Power Supply Contains 2 separate parts. Brick Power supply And Detachable Cable connects to Wall socket, it';s co... [Author: Sekhar Somu - Computers and Internet - April 10, 2010]

  Read the article

• Friendly Purchase Suggestions - DELL XPS M1330(PA10) Laptop Computer Power Supply

  DELL XPS M1330 Series Laptop Computer PC charger is defective; consider few tips here Power Supply Contains 2 separate parts. Brick Power supply And Detachable Cable connects to Wall socket, it';s co... [Author: Sekhar Somu - Computers and Internet - April 10, 2010]

  Read the article

• NVidia with Optimus conflicting in Ubuntu 12.04

  - by Humannoise

  i have recently installed Ubuntu 12.04 in a Intel Ivy Bridge with integrated graphics and NVidia GPU with Optimus tech, however i cant manage it to work properly. I have already passed by the solution of bumblebee project, however iam got the following message when try to run anything with nvidia card( e.g. with optirun firefox): [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect. [ERROR]Could not connect to bumblebee daemon - is it running? Since the nvidia card is not working properly, some softwares like Scilab, that make use of X11 system for graphic handling and plotting, wont work too. my bios has no option concerning graphics card and the log of daemon returned: Jul 5 16:10:51 humannoise-W251ESQ-W270ESQ bumblebeed[980]: Module 'nvidia' is not found. Jul 5 16:10:51 humannoise-W251ESQ-W270ESQ kernel: [ 17.943272] init: bumblebeed main process (980) terminated with status 1 Jul 5 16:10:51 humannoise-W251ESQ-W270ESQ kernel: [ 17.943288] init: bumblebeed main process ended, respawning Jul 5 16:10:51 humannoise-W251ESQ-W270ESQ bumblebeed[1026]: Module 'nvidia' is not found. The lspci -nn | grep '\[030[02]\]:' returned: 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0de9] (rev a1) Ok, for the command dpkg -l | grep '^ii' | grep nvidia i got : ii bumblebee-nvidia 3.0-2~preciseppa1 nVidia Optimus support using the proprietary NVIDIA driver ii nvidia-current 302.17-0ubuntu1~precise~xup1 NVIDIA binary Xorg driver, kernel module and VDPAU library ii nvidia-current-updates 295.49-0ubuntu0.1 NVIDIA binary Xorg driver, kernel module and VDPAU library ii nvidia-settings 302.17-0ubuntu1~precise~xup3 Tool of configuring the NVIDIA graphics driver ii nvidia-settings-updates 295.33-0ubuntu1 Tool of configuring the NVIDIA graphics driver After full reinstallation, including the remove of any previous nvidia drive, lsmod | grep -E 'nvidia|nouveau' returned: nvidia 10888310 46 dmesg | grep -C3 -E 'nouveau|NVRM' returned things like: [ 1875.607283] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1875.607289] nvidia 0000:01:00.0: setting latency timer to 64 [ 1875.607293] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 1875.607363] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 302.17 Tue Jun 12 16:03:22 PDT 2012 [ 1884.830035] nvidia 0000:01:00.0: PCI INT A disabled [ 1884.832058] bbswitch: disabling discrete graphics [ 1884.832960] bbswitch: Result of Optimus _DSM call: 09000019 Some programs, like Scilab, are now working fine under optirun(e.g. >optirun scilab) call. Thank you.

  Read the article

• Cannot get Virtualbox to install properly on Ubuntu 12.04

  - by lopac1029

  I cannot get Virtualbox to install properly on my 12.04. I first went with a manual install for the .deb from the old builds section of the Virtualbox page. That .deb opened up the Software Center and installed. Then I got the error coming up of VT-x/AMD-V hardware acceleration is not available on your system. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot. which I can only assume was due to my Ubuntu version being 32-bit (System Details - Overview - OC type: 32-bit, right?) So I followed these instructions to remove the .deb manually, restarted my laptop, and then FOUND the actual Virtualbox install in the Software Center and installed from that (assuming it would give me the correct version I need for my system) So after all that (and then some), I'm still getting the same error when I connect to my new job's project in Virtualbox. Can anyone point me in the right direction of what to do here? This is the first time I've ever worked with Virtualbox, and no one at this company is using Ubuntu, so I'm on my own here. EDIT: Here is the direct info from running the 2 suggested commands Inspiron-1750-brick:~ $lscpu Architecture: i686 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 23 Stepping: 10 CPU MHz: 2100.000 BogoMIPS: 4189.45 L1d cache: 32K L1i cache: 32K L2 cache: 2048K Inspiron-1750-brick:~ $cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.80 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.45 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

  Read the article

• Can not print after upgrading from 12.x to 14.04

  - by user318889

  After upgrading from V12.04 to V14.04 I am not able to print. I am using an HP LaserJet 400 M451dn. The printer troubleshooter told me that there is no solution to the problem. This is the output of the advanced diagnositc output. (Due to limited space I cut the output!) Can anybody tell me what is going wrong. I am using the printer via USB ? Page 1 (Scheduler not running?): {'cups_connection_failure': False} Page 2 (Is local server publishing?): {'local_server_exporting_printers': False} Page 3 (Choose printer): {'cups_dest': , 'cups_instance': None, 'cups_queue': u'HP-LaserJet-400-color-M451dn', 'cups_queue_listed': True} Page 4 (Check printer sanity): {'cups_device_uri_scheme': u'hp', 'cups_printer_dict': {'device-uri': u'hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670', 'printer-info': u'Hewlett-Packard HP LaserJet 400 color M451dn', 'printer-is-shared': True, 'printer-location': u'Pinatubo', 'printer-make-and-model': u'HP LJ 300-400 color M351-M451 Postscript (recommended)', 'printer-state': 4, 'printer-state-message': u'', 'printer-state-reasons': [u'none'], 'printer-type': 8556636, 'printer-uri-supported': u'ipp://localhost:631/printers/HP-LaserJet-400-color-M451dn'}, 'cups_printer_remote': False, 'hplip_output': (['', '\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.6)\x1b[0m', '\x1b[01mDevice Information Utility ver. 5.2\x1b[0m', '', 'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP', 'This software comes with ABSOLUTELY NO WARRANTY.', 'This is free software, and you are welcome to distribute it', 'under certain conditions. See COPYING file for more details.', '', '', '\x1b[01mhp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670\x1b[0m', '', '\x1b[01mDevice Parameters (dynamic data):\x1b[0m', '\x1b[01m Parameter Value(s) \x1b[0m', ' ---------------------------- ----------------------------------------------------------', ' back-end hp ', " cups-printers ['HP-LaserJet-400-color-M451dn'] ", ' cups-uri hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670 ', ' dev-file ', ' device-state -1 ', ' device-uri hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670 ', ' deviceid ', ' error-state 101 ', ' host ', ' is-hp True ', ' panel 0 ', ' panel-line1 ', ' panel-line2 ', ' port 1 ', ' serial CNFF308670 ', ' status-code 5002 ', ' status-desc ', '\x1b[01m', 'Model Parameters (static data):\x1b[0m', '\x1b[01m Parameter Value(s) \x1b[0m', ' ---------------------------- ----------------------------------------------------------', ' align-type 0 ', ' clean-type 0 ', ' color-cal-type 0 ', ' copy-type 0 ', ' embedded-server-type 0 ', ' fax-type 0 ', ' fw-download False ', ' icon hp_color_laserjet_cp2025.png ', ' io-mfp-mode 1 ', ' io-mode 1 ', ' io-support 6 ', ' job-storage 0 ', ' linefeed-cal-type 0 ', ' model HP_LaserJet_400_color_M451dn ', ' model-ui HP LaserJet 400 Color m451dn ', ' model1 HP LaserJet 400 Color M451dn ', ' monitor-type 0 ', ' panel-check-type 0 ', ' pcard-type 0 ', ' plugin 0 ', ' plugin-reason 0 ', ' power-settings 0 ', ' ppd-name lj_300_400_color_m351_m451 ', ' pq-diag-type 0 ', ' r-type 0 ', ' r0-agent1-kind 4 ', ' r0-agent1-sku CE410A/CE410X ', ' r0-agent1-type 1 ', ' r0-agent2-kind 4 ', ' r0-agent2-sku CE411A ', ' r0-agent2-type 4 ', ' r0-agent3-kind 4 ', ' r0-agent3-sku CE413A ', ' r0-agent3-type 5 ', ' r0-agent4-kind 4 ', ' r0-agent4-sku CE412A ', ' r0-agent4-type 6 ', ' scan-src 0 ', ' scan-type 0 ', ' status-battery-check 0 ', ' status-dynamic-counters 0 ', ' status-type 3 ', ' support-released True ', ' support-subtype 2202411 ', ' support-type 2 ', ' support-ver 3.12.2 ', " tech-class ['Postscript'] ", " tech-subclass ['Normal'] ", ' tech-type 4 ', ' usb-pid 3882 ', ' usb-vid 1008 ', ' wifi-config 0 ', '\x1b[01m', 'Status History (most recent first):\x1b[0m', '\x1b[01m Date/Time Code Status Description User Job ID \x1b[0m', ' -------------------- ----- ---------------------------------------- -------- --------', ' 08/21/14 00:07:25 5012 Device communication error richard 0 ', ' 08/20/14 13:42:44 500 Started a print job richard 4214 ', '', '', 'Done.', ''], ['\x1b[35;01mwarning: No display found.\x1b[0m', '\x1b[31;01merror: hp-info -u/--gui requires Qt4 GUI support. Entering interactive mode.\x1b[0m', '\x1b[31;01merror: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670\x1b[0m', '\x1b[31;01merror: Error opening device (Device not found).\x1b[0m', ''], 0), 'is_cups_class': False, 'local_cups_queue_attributes': {'charset-configured': u'utf-8', 'charset-supported': [u'us-ascii', u'utf-8'], 'color-supported': True, 'compression-supported': [u'none', u'gzip'], 'copies-default': 1, 'copies-supported': (1, 9999), 'cups-version': u'1.7.2', 'device-uri': u'hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670', 'document-format-default': u'application/octet-stream', 'document-format-supported': [u'application/octet-stream', u'application/pdf', u'application/postscript', u'application/vnd.adobe-reader-postscript', u'application/vnd.cups-command', u'application/vnd.cups-pdf', u'application/vnd.cups-pdf-banner', u'application/vnd.cups-postscript', u'application/vnd.cups-raw', u'application/vnd.samsung-ps', u'application/x-cshell', u'application/x-csource', u'application/x-perl', u'application/x-shell', u'image/gif', u'image/jpeg', u'image/png', u'image/tiff', u'image/urf', u'image/x-bitmap', u'image/x-photocd', u'image/x-portable-anymap', u'image/x-portable-bitmap', u'image/x-portable-graymap', u'image/x-portable-pixmap', u'image/x-sgi-rgb', u'image/x-sun-raster', u'image/x-xbitmap', u'image/x-xpixmap', u'image/x-xwindowdump', u'text/css', u'text/html', u'text/plain'], 'finishings-default': 3, 'finishings-supported': [3], 'generated-natural-language-supported': [u'en-us'], 'ipp-versions-supported': [u'1.0', u'1.1', u'2.0', u'2.1'], 'ippget-event-life': 15, 'job-creation-attributes-supported': [u'copies', u'finishings', u'ipp-attribute-fidelity', u'job-hold-until', u'job-name', u'job-priority', u'job-sheets', u'media', u'media-col', u'multiple-document-handling', u'number-up', u'output-bin', u'orientation-requested', u'page-ranges', u'print-color-mode', u'print-quality', u'printer-resolution', u'sides'], 'job-hold-until-default': u'no-hold', 'job-hold-until-supported': [u'no-hold', u'indefinite', u'day-time', u'evening', u'night', u'second-shift', u'third-shift', u'weekend'], 'job-ids-supported': True, 'job-k-limit': 0, 'job-k-octets-supported': (0, 470914416), 'job-page-limit': 0, 'job-priority-default': 50, 'job-priority-supported': [100], 'job-quota-period': 0, 'job-settable-attributes-supported': [u'copies', u'finishings', u'job-hold-until', u'job-name', u'job-priority', u'media', u'media-col', u'multiple-document-handling', u'number-up', u'output-bin', u'orientation-requested', u'page-ranges', u'print-color-mode', u'print-quality', u'printer-resolution', u'sides'], 'job-sheets-default': (u'none', u'none'), 'job-sheets-supported': [u'none', u'classified', u'confidential', u'form', u'secret', u'standard', u'topsecret', u'unclassified'], 'jpeg-k-octets-supported': (0, 470914416), 'jpeg-x-dimension-supported': (0, 65535), 'jpeg-y-dimension-supported': (1, 65535), 'marker-change-time': 0, 'media-bottom-margin-supported': [423], 'media-col-default': u'(unknown IPP value tag 0x34)', 'media-col-supported': [u'media-bottom-margin', u'media-left-margin', u'media-right-margin', u'media-size', u'media-source', u'media-top-margin', u'media-type'], 'media-default': u'iso_a4_210x297mm', 'media-left-margin-supported': [423], 'media-right-margin-supported': [423],

  Read the article

• Intel Server Strategy Shift with Sandy Bridge EN & EP

  - by jchang

  The arrival of the Sandy Bridge EN and EP processors, expected in early 2012, will mark the completion of a significant shift in Intel server strategy. For the longest time 1995-2009, the strategy had been to focus on producing a premium processor designed for 4-way systems that might also be used in 8-way systems and higher. The objective for 2-way systems was use the desktop processor that later had a separate brand and different package & socket to leverage the low cost structure in driving...(read more)

  Read the article

• Want to Hear About IIS8?

  - by The Official Microsoft IIS Site

  With the recent release of the Windows 8 Consumer Preview and the Windows Server 8 Beta I’ve been looking at the new features in IIS8 such as: Web Socket Support Application Initialization Configuration Optimization SNI Support and many more… If you would like to know more and are in the Manchester area why not come along to NxtGenUG Manchester on Wednesday 18th April 2012 where I’ll be giving my first in a number of sessions on IIS8.  For more information or to signup please visit the NxtGenUG...(read more)

  Read the article

• Looking to trade a 1U HP Proliant DL360 G5 in exchange for a small linux VPS

  - by user597875

  I have a 1U HP Proliant DL360 G5 that I have no place to rack and would like to trade it for a small linux VPS. If interested let me know... Here are the specs of the server: Model: Intel Xeon CPU 5150 @ 2.66GHz, 4MB L2 Cache Processor Speed: 2.7GHz Processor Sockets: 2 Processor Cores per Socket: 2 Logical Processors: 4 8GB of memory 4x72GB 10k SAS drives Manufacturer: HP Model: Proliant DL360 G5 BIOS Version: P58

  Read the article

• FeiTeng 1000

  - by nospam(at)example.com (Joerg Moellenkamp)

  My colleague Roland pointed me to a website with some additional information about the usage of SPARC in the Tianhe-1a super computer: 512 飞腾 Server( 4 socket Galaxy FT1000 飞腾 cpu ( 65nm, 1Ghz, 8 core, 8 threads, openSPARC T2) that has 3HT links and 4 DDR3 memory channel and 8 PCI2.0)So essentialy the NUDT took the openSPARC T2 and added DDR3 , PCIe 2.0 and Hypertransport to it ...

  Read the article

• gnome-open raises this error when run from inside tmux

  - by dan

  The error I get is this: GConf Error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: Error connecting: Connection refused) Failed to open bus: Failed to connect to socket /tmp/dbus-BYC0LHrEHk: Connection refused Any suggestions?

  Read the article

• Problems installing clamcour

  - by user10778

  Hello People, when i try to install clamcour from terminal, it gives me this error, somebody can help me? calmcourdir# ./configure checking for libraries containing socket functions... -lc checking for socket... yes checking for bind... yes checking for listen... yes checking for accept... yes checking for shutdown... yes checking for socklen_t... yes checking for struct sockaddr_un.sun_len... no System log functions checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for openlog... yes checking for syslog... yes checking for closelog... yes Time functions checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for localtime_r... yes checking for strftime... yes checking for unistd.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for sysconf... yes BZip2 support checking bzlib.h usability... no checking bzlib.h presence... no checking for bzlib.h... no checking for BZ2_bzWriteOpen in -lbz2... no GZip support checking zlib.h usability... no checking zlib.h presence... no checking for zlib.h... no checking for gzopen in -lz... no LibClamAV support checking for /usr/bin/clamav-config... no checking for /usr/local/bin/courier-config... no checking for /usr/clamav/bin/clamav-config... no checking for /usr/local/clamav/bin/clamav-config... no ./configure: line 25234: : command not found configure: error: Cannot find clamav-config

  Read the article

• Keep getting SocketExceptions (6 replies)

  I am using the System.Net.Sockets.NetworkStream to read data from a network connection I keep getting exceptions #### Exception System.Net.Sockets.SocketException E FAIL (11) #### #### Microsoft.SPOT.Net.SocketNative::recv [IP: 0000] #### #### System.Net.Sockets.Socket::Receive [IP: 0018] #### #### System.Net.Sockets.NetworkStream::Read [IP: 005e] #### #### MFToolkit.Net.Web.HttpRequest::Read [IP:...

  Read the article

• Problems building clamcour

  - by user10778

  Hello People, when i try to install clamcour from terminal, it gives me this error, somebody can help me? calmcourdir# ./configure checking for libraries containing socket functions... -lc checking for socket... yes checking for bind... yes checking for listen... yes checking for accept... yes checking for shutdown... yes checking for socklen_t... yes checking for struct sockaddr_un.sun_len... no System log functions checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for openlog... yes checking for syslog... yes checking for closelog... yes Time functions checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for localtime_r... yes checking for strftime... yes checking for unistd.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for sysconf... yes BZip2 support checking bzlib.h usability... no checking bzlib.h presence... no checking for bzlib.h... no checking for BZ2_bzWriteOpen in -lbz2... no GZip support checking zlib.h usability... no checking zlib.h presence... no checking for zlib.h... no checking for gzopen in -lz... no LibClamAV support checking for /usr/bin/clamav-config... no checking for /usr/local/bin/courier-config... no checking for /usr/clamav/bin/clamav-config... no checking for /usr/local/clamav/bin/clamav-config... no ./configure: line 25234: : command not found configure: error: Cannot find clamav-config

  Read the article

• Lot of "file not found" when using sudo find / -type s

  - by Andrea Moro

  In the attempt to understand why I keep getting the following error error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' while using the command sudo find / -type s the terminal prompted something like this find: ‘/proc/31348/task/31348/fd/5’: No such file or directory find: ‘/proc/31348/task/31348/fdinfo/5’: No such file or directory find: ‘/proc/31348/fd/5’: No such file or directory find: ‘/proc/31348/fdinfo/5’: No such file or directory What does this mean?

  Read the article

• Reseller exposes Opteron 6100 speeds and prices

  <b>Channel Register:</b> "Ohio computer components reseller Provantage accidentally let slip pricing information for the forthcoming "Magny-Cours" eight- and 12-core Opteron 6100 series of processors for two- and four-socket boxes"

  Read the article

• Will Beej's Guide to Network programming point me the right way to be able to make multiplayer games and a web broswer?

  - by Logan545

  I'm new to socket programming in C, and I've found the Beej's Guide to Networking programming. It looks fine and all, however, I just wanted to ask whether this tutorial will point me in the right direction in terms of network programming. I plan to build a game in opengl that will be multiplayer using c+ and possibly a web browser. I know this tutorial would by no means teach me how to do this, but would this be a good way to start off on my path?

  Read the article

• TLS/SSL and .NET Framework 4.0

  The Secure Socket Layer is now essential for the secure exchange of digital data, and is most generally used within the HTTPS protocol. .NET now provides the Windows Communication Foundation (WCF) to implement secure communications directly. Matteo explains the TLS/SSL protocol, and takes a hands-on approach to investigate the SslStream class to show how to implement a secure communication channel

  Read the article

• How often should multiplayer games communicate with the server?

  - by Bane

  I once heard that Runescape "ticks" every 0.3s, and that seemed like a very long period of time, although Runescape is kind of a slow game. I'm building a more dynamic top-down shooter game, and I'm wandering, how often should I communicate with the server? ASAP, or every 0.1s? How do shooter games usually do it? Both the server and the client are written in Javascript, node.js and socket.io are being used.

  Read the article

• Messenger Application

  The messenger application is about chatting among multiplies users. Socket technique (UDP) is used in this application.

  Read the article

• Android real time multiplayer over LAN

  - by Heigo

  I've developed several games for the android platform and now planning to create my first multiplayer game. What I have in mind is basically just a 2-player game witch you can play with 2 phones over local area connection/WiFi. Both phones need to be able to pass 3 integer values to the other phone in real time. So far I have considered using Socket's, but before I dig into it too deep I wanted to ask if there might be a better approach? Thanks!

  Read the article

• Toshiba A105 s4244 microphone doesn't work

  - by Adrian Gabura

  I have installed ubuntu on my toshiba laptop and whenever I connect a microphone it doesn't detect any sounds at all. Everything worked well under xp. When I try sound recorder to record sounds it registers no sounds. The only thing that actually gets recorded is a sound when I remove or connect the microphone in its socket(a kind of a "click"). No its NOT muted I checked a million times. Thanks a lot!

  Read the article

• Opera 12.10 disponible en beta : le navigateur norvégien s'attaque à Windows 8, Mountain Lion et aux écrans Retina

  Opera 12.10 disponible en beta Le navigateur s'attaque à Windows 8, Mountain Lion et aux écrans Retina Opera 12.10 vient de sortir en beta. Au menu, le support du SPDY, ce protocole proposé par Google pour accélérer le chargement des pages et de Web Socket (« depuis que les problèmes de sécurité ont été résolus » explique Opera Software), de nouvelles API pour créer des extensions, une meilleure intégration dans Mac OS X Mountain Lion et le support des écrans Retina. Des améliorations sur le zoom tactile ont également été faites pour la version Windo...

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >