Search Results

Search found 34060 results on 1363 pages for 'ubuntu font family'.

Page 114/1363 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• Unable to change IP address for eth0 without restart in Ubuntu

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I tried to change the IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4 auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status When I issue: sudo service networking restart I get this response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart does the IP change. Any ideas?

  Read the article

• Just installed Ubuntu 10.10, can't connect via SSH

  - by swilliams

  I've just downloaded and installed Ubuntu 10.10 in a VM on virtualbox (4.0.4). Everything on the VM is set to the defaults: NAT adapter. When installing the OS, I selected OpenSSH, and nothing else. I've tried to connect to the server via ssh from the host (running Mac OS X), but it only timeouts. Can't scp my credentials to it or ping the server either. As far as I can tell, the server is connected fine, has a valid IP, and can ping google.com. I know I'm missing something basic here... I don't believe I have any kind of firewall up, unless there's one I don't know about that comes with the install. iptables has the default configuration.

  Read the article

• Port Forwarding Using iptables on Ubuntu

  - by user141610

  This is the scenario. I have configured a web-server in MUX. Now I want to access that web-server from Internet. Ubuntu box has two interfaces, One is connected to WAN (Public IP) and another one is connected to MUX (Private IP). MUX has no option to insert default gateway. iptables -t nat -A PREROUTING -p tcp -i eth0 -d 103.x.x.x --dport 8001 -j DNAT --to-destination 192.168.1.2:8080 iptables -A FORWARD -p tcp -d 192.168.1.2 --dport 8080 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT It does not work. Thanks...

  Read the article

• Ubuntu 12.10 sources.list empty after install

  - by Martin Nielsen

  I recently installed the Ubuntu 12.10 server version from a USB stick. The step "Install additional software" or whatever keeps failing, so i though screw it and continued. Everything else worked like a charm. I thought. Turns out, the only two entries in my sources.list are the install CD. This means that i have no way of getting a.. well.. anything installed. Can someone give me a short list of repositories that i need so i can put them in the file? And on a similar note: What is the comment character for the sources list? #?

  Read the article

• df-h command in ubuntu

  - by Esha Sharma

  I am a new user of Ubuntu. When I type df -h in terminal , it gives me list of all storage devices and space usage. In my system I get this. Filesystem Size Used Avail Use% Mounted on /cow 934M 173M 761M 19% / udev 925M 4.0K 925M 1% /dev tmpfs 374M 856K 373M 1% /run /dev/sdb1 7.5G 2.8G 4.8G 37% /cdrom /dev/loop0 1.5G 1.5G 0 100% /rofs tmpfs 934M 16K 934M 1% /tmp none 5.0M 0 5.0M 0% /run/lock none 934M 76K 934M 1% /run/shm /dev/sda 299G 74M 299G 1% /media/q I understand that /dev/sda is my hard drive which is 320 gb(in gib it is 299 and hopefully that is what is being displayed) and /dev/sdb1 is pendrive of 8gb from which I am running the live cd. My question is what are the other folders and what is the physical location of these folders if complete memory is taken by the device dev/sda?

  Read the article

• Ubuntu 12.04 Transparent proxy gateway

  - by user146536

  i have a ubuntu server which i want to use as a transparent proxy, (i have no issue setting up squid, just the iptables. The server only has one network interface. The server sits on the same subnet as the router which is the current gateway to the internet for clients, i want to simply set the gateway on the clients pointing at the transparent proxy which in turn forwards the requests to the router and off to the internet. See me diagram, can anybody offer to help with the iptables configuration to achieve this scenario? subnet mask /22 Router(10.4.12.1) Transparent Proxy (eth0, 10.4.12.2) | | +----+----+---------+----+----+ | | | | Comp1(10.4.12.6) Comp2(10.4.12.5) Comp3(10.4.12.4) Comp4(10.4.12.3) Thanks

  Read the article

• Can't unlock locked screen, in Ubuntu 12

  - by Camille Goudeseune

  After locking the screen (with a keystroke bound to xlock -nice 8 -mode blank), I can unlock the screen as expected, but only within a few minutes. After being locked overnight, when I hit a key (even Ctrl+Alt combos), the screen stays black with just a brief white flash across the middle of both monitors. The workaround is to ssh in from another host and restart X. Some months ago, this happened every few weeks. By now it happens almost every morning. How do I even start to diagnose this? What might I look for in log files? (The intermittency is particularly troubling.) Failing that, is there an alternative to xlock aka xlockmore? Hardware: 3-year-old HP minitower, GEForce 9800 GT, two Asus LCD monitors. Software: Ubuntu 12.04.2 LTS. Window manager awesome-wm. NVidia driver 304.88. XLock version xlockmore-5.31.

  Read the article

• Clean Install: Ubuntu 8.04, 10.04 or somthing else?

  - by Robert S. Barnes

  I'm faced with a pending clean install due to a dying hard drive in my old Dell Inspiron 8600 laptop. I've been running Ubuntu 8.04 on it since... 8.04 and I've been more or less happy with it except that it's a PITA to recompile the kernel or do any other kernel related work. I mostly do software dev on it, gcc, gvim, c/c++/perl/php/mysql and running vmware server 2.0. I've heard mixed reviews of 10.04, and am wondering what to put on the new HD. I'm even considering just sticking with 8.04 as it seems to mostly meet my needs. Any suggestions?

  Read the article

• How to create a new user group and add user to it in Ubuntu 12.04

  - by Omal Lasitha

  My OS is Ubuntu 12.04.1 Desktop version (32bit). I want to create a new group called restricted which allows its users to use Audio devices and Video devices only, and I want to add a user called visitors to that group. By using Users and Groups, I was able to create a new user account called visitors, and a new group called restricted. But I can't figure out how to add those settings to the group restricted, and add the visitors user account to that group. I tried Google-ing, but every search result was about accessing root privileges and all, and I couldn't find answers on this specific topic.

  Read the article

• Default maximum heap size -- Ubuntu 10.04 LTS, openjdk6-jre

  - by sachin

  I just installed openjdk6-jre on Ubuntu 10.04 java version "1.6.0_20" OpenJDK Runtime Environment (IcedTea6 1.9.2) (6b20-1.9.2-0ubuntu1~10.04.1) OpenJDK 64-Bit Server VM (build 19.0-b09, mixed mode) Every time I run "java" I get this error: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. This can be solved by specifying a maximum heap size and running "java -Xmx256m" But is there anyway to permanently fix this error (i.e. set the default heap size to 256MB so that I do not need to specify the max heap size every time I run the command)

  Read the article

• No Drivers in Ubuntu 9.10

  - by Chris

  I have a Lenovo G550 and I installed Ubuntu on it through Windows and I have no drivers. No sound, no wireless. I previously had installed it through Windows Vista with no problems at all. I now run Windows 7 and cannot seem to get it to function properly. I tried installing the recommended drivers to make sure the proper ones were installed and that still did nothing. Any one have ANY idea what could be happening? I just don't feel like dealing with it.

  Read the article

• Cannot connect via OpenSSH and FTP to my ubuntu server

  - by budde

  Hello I have installed a webserver (ubuntu server 10.04) and it is connected to the internet. I can tell because the apache server apparently is working. But i can't get SSH or FTP to work. When I try to login from my laptop (SSH user@my-ip) ,SSH asks for my password, and when i give it, it does nothing! Also when I give the wrong password, it tells me that the password is incorrect. I'm also receiving an error while trying to connect by FTP. Sorry could not display all the contents of "/ on [my-ip]": DBus error

  Read the article

• Lan DNS not working after reinstall of Ubuntu 13.10

  - by DrorCohen

  I upgrade my Ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's host name. I get "Unknown Host". However pinging from another computer on the same lan - works fine (a laptop with 12.04 lts). for that matter every ping from the 13.10 to the local lan by hostname fails, ping with ip works. I don't have a local DNS server but somehow all the other computers in the network find each other by host name - only this new one fails... help appreciated...

  Read the article

• Ubuntu 6.06 Boot problem

  - by nijikunai

  I tried to boot my pc using ubuntu 6.06 in the live cd mode but it refuses to boot. It throws the error Uncompressing Linux.. ok, booting from kernel [ 54.168828] ACPI Unable to load the System Descriptor Tables The live cd works perfectly okay in other computers. Out of curiosity, I also tried to boot using Slax live cd, It too threw some errors incomplete literal tree invalid compressed format (err=1) UDF-fs: No partition found (1) XFS: bade magic number XFS: SB validate failed Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) The slax errors are a bit worrying to me. Thanks for the help in advance!

  Read the article

• Rebuilding RAID1 in Ubuntu

  - by John Utech

  I had my second HD in my RAID1 come up with bad sectors. So I got another drive and pulled out the bad sector drive and put the new drive in. With the original working RAID1 drive in the computer it failed to boot. I manually copied everything from the old drive over via a Gparted Live CD. Still no booting. Kind of scratching my head here as I can see that both of the drives have data on them but are unable to get either of them to boot. I used a Ubuntu live CD and couldn't even manually mount either of the drives, which I thought was really the odd part. Not sure where to go from here.

  Read the article

• ubuntu server refusing connections via port forwarding

  - by Matt

  Getting some really weird behavior from our Ubuntu server... it's behind a Verizon router firewall with port forwarding (port 8080 to port 80 on the server), and we've been having issues accessing it via this external IP. From within the network, it appears to respond normally (I can access it via web browser and SSH), but refuses connections through port forwarding (using our static external IP). The strangest thing is that it actually responds to external port-forwarded connections right after being restarted, but quickly lapses back into this pattern of refusing external connections. I'm a bit of a server newbie (I'm actually a programmer in a small startup that just lost their server ops guy, urgh) so this is all trial by fire for me. Does anyone have any advice on what could be going wrong here? Any help would be appreciated, thanks.

  Read the article

• ubuntu boots into gnu grub 1.99

  - by greenish

  I've tried set root=(hd0,2) chainloader +1 boot set root=(hd0,2) linux /boot/vmlinuz... and the loopback (loop0) /ubuntu/disks/root.disk command etc. When I try the boot command it tells me there's no kernel and when I boot Win7 (it's a dual boot) the root.disk says 0kb. nothing boots from the live usb I've made and I've tried to use programs to mount the partitions to no effect - they only show me what's on my windows file drives. I've got some really important docs on the linux harddrive I need to get to. any ideas?

  Read the article

• MySQL - complete server migration (Ubuntu) [closed]

  - by Mr A

  Possible Duplicate: How to copy and move mysql database Dump all databases with SSH access I'm setting up a new dev machine, and I have the old one sitting right next to me. I'd like to do an exact copy of all MySQL structures and data from the old machine to the new. Nothing fancy needs to happen (it's a dev machine). No replication. I don't care about "downtimes" etc. Is there a super simple way to do this? For example, I have SSH on the old server, can I just use Nautilus, do a connect to server, and then transfer a folder over, replacing another folder with it and be done? It's the same version of MySQL on both sides. Same version of Ubuntu. Same in most respects.

  Read the article

• Ubuntu 12.04: Unable to add or delete a user named 'mysql'

  - by Afaque H

  I am trying to install MySql on Ubuntu 12.04 but the installation is failing with the error: "Can't change to run as user 'mysql'. Check if the user 'mysql' exits." So I go ahead type in the command : 'cat /etc/passwd | grep mysql' and result is null. I try to add a user 'mysql' by issuing the command 'useradd mysql'/. But it fails with the message: 'useradd: user 'mysql' already exists'. When I try to delete the user 'mysql' using the command 'userdel mysql' it also fails with the message "userdel: cannot remove entry 'mysql' from /etc/passwd." Can anyone explain me what's going on and suggest a solution.

  Read the article

• Stop Ubuntu From Automatically Updating the Time

  - by Yar

  I just need to set the date temporarily. I run this date 051918002010.00 and it sticks for just 5 seconds or so. Then it syncs with the time server. I have tried: ps aux | grep ntp but there is nothing there. I need a correct answer now, more than a more detailed answer later :) Edit: As answerers quickly discovered, my Ubuntu is running in a VirtualBox, which turned out to be relevant for some versions of the answer. Thanks to everybody.

  Read the article

• Load on Ubuntu 8.04 LTS high

  - by Paddington

  My Ubuntu 8.04 LTS server periodically has a high load avg spike(once every 2 days) resulting in Apache timing out and virtualy everything even SSH to the server is not possible. When I am on the console and run TOP is see that The load avg increases from less than 1 to above 60 in 15 mins. How can I isolate the cause? top - 09:21:51 up 37 days, 20:18, 6 users, load average: 5.41, 5.53, 5.36 Tasks: 160 total, 2 running, 156 sleeping, 0 stopped, 2 zombie Cpu(s): 65.0%us, 8.8%sy, 0.0%ni, 1.0%id,24.6%wa, 0.3%hi, 0.3%si, 0.0%st Mem: 3989468k total, 3444984k used, 544484k free, 360460k buffers Swap: 11687248k total, 178168k used, 11509080k free, 881772k cached

  Read the article

• Ubuntu 10.4 No internet

  - by Keeper780

  I have Ubuntu 10.4 dual booted with Windows Vista on a work Lenovo R61 laptop. The home and work wireless connection were working fine. I lost all internet connection at work. The IT guy clearly knew nothing about Linux. Since he 'fixed' it get nothing, no wlan signal the Network manager icon was gone, no internet. I still have the live disc and if I run from the live disc the connections are there and everything works perfectly. How do I restore the internet easily on my laptop. I have been using Linux for 3 Years but I am still a bit of a newbie, this is the first major problem I've had in three years. It's driving me nuts. Thanks

  Read the article

• Setting JAVA_HOME on Ubuntu 10.x

  - by user20285

  I'm trying to get the Rhodes framework installed so I can develop Android apps. This requires that I install the SUN JDK and add JAVA_HOME and JAVA_HOME/bin to path. I thought I could solve this by editing my bash.bashrc file: JAVA_HOME="/usr/lib/jvm/java-6-sun/jre/bin/java" export JAVA_HOME PATH=$PATH:$JAVA_HOME/bin This still doesn't work, because when I run: rake run:android I get a prompt in the console that says the Java bin was not found in my path. However, running echo $PATH gets me: usernamee@ubuntu:~$ echo $PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/username/ruby/gems/bin:/usr/lib/jvm/java-6-sun/jre/bin/java/bin:/home/username/ruby_files/android-sdk-linux_86/tools What are my options here? Edit: If the problem is not the export statement, how can I ensure that the Sun JDK is properly installed and that I am, in fact, pointing to the correct path in bashrc?

  Read the article

• ubuntu 10.04 notebook edition running slow

  - by Nrew

  I installed ubuntu 10.04 notebook edition inside windows 7 through wubi installation. I've installed it in a Compaq Presario b1200 laptop. But the graphics is very slow. When I choose the items in the left hand pane. It takes up to 15 seconds for the screen to react. What am I supposed to do? I tried to go to the device manager and see if there is a graphic driver that isn't installed but it said that there are no proprietary drivers available. What might be the cause of this problem, how to solve this.

  Read the article

• Touchpad not working after login in Ubuntu

  - by Maria Mateescu

  At some point my touchpad stopped working on Lenovo x220 under Ubuntu 11.10, after login. I have found two possible solutions for that online, but neither of them work. First, gconftool-2 --set --type boolean /desktop/gnome/peripherals/touchpad/touchpad_enabled true and a second one, xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Off" 8 0 After looking more carefully into xinput I have realized that xinput list-props "SynPS/2 Synaptics TouchPad" outputs: Device Enabled (132): 0 This field seems to be stuck to zero, because trying to set it back to 1 by: xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Device Enabled" 8 1 doesn't seem to have any effect, e.g. I still have: Device Enabled (132): 0 Any ideas? Thank you!

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >