Search Results

Search found 6414 results on 257 pages for 'unread mail'.

Page 114/257 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

  • Gmail rejects emails. Openspf.net fails the tests

    - by pablomedok
    I've got a problem with Gmail. It started after one of our trojan infected PCs sent spam for one day from our IP address. We've fixed the problem, but we got into 3 black lists. We've fixed that, too. But still every time we send an email to Gmail the message is rejected: So I've checked Google Bulk Sender's guide once again and found an error in our SPF record and fixed it. Google says everything should become fine after some time, but this doesn't happen. 3 weeks already passed but we still can't send emails to Gmail. Our MX setup is a bit complex, but not too much: We have a domain name delo-company.com, it has it's own mail @delo-company.com (this one is fine, but the problems are with sub-domain name corp.delo-company.com). Delo-company.com domain has several DNS records for the subdomain: corp A 82.209.198.147 corp MX 20 corp.delo-company.com corp.delo-company.com TXT "v=spf1 ip4:82.209.198.147 ~all" (I set ~all for testing purposes only, it was -all before that) These records are for our corporate Exchange 2003 server at 82.209.198.147. Its LAN name is s2.corp.delo-company.com so its HELO/EHLO greetings are also s2.corp.delo-company.com. To pass EHLO check we've also created some records in delo-company.com's DNS: s2.corp A 82.209.198.147 s2.corp.delo-company.com TXT "v=spf1 ip4:82.209.198.147 ~all" As I understand SPF verifications should be passed in this way: Out server s2 connects to MX of the recepient (Rcp.MX): EHLO s2.corp.delo-company.com Rcp.MX says Ok, and makes SPF check of HELO/EHLO. It does NSlookup for s2.corp.delo-company.com and gets the above DNS-records. TXT records says that s2.corp.delo-company.com should be only from IP 82.209.198.147. So it should be passed. Then our s2 server says RCPT FROM: Rcp.MX` server checks it, too. The values are the same so they should also be positive. Maybe there is also a rDNS check, but I'm not sure what is checked HELO or RCPT FROM. Our PTR record for 82.209.198.147 is: 147.198.209.82.in-addr.arpa. 86400 IN PTR s2.corp.delo-company.com. To me everything looks fine, but anyway all emails are rejected by Gmail. So, I've checked MXtoolbox.com - it says everything is fine, I passed http://www.kitterman.com/spf/validate.html Python check, I did 25port.com email test. It's fine, too: Return-Path: <[email protected]> Received: from s2.corp.delo-company.com (82.209.198.147) by verifier.port25.com id ha45na11u9cs for <[email protected]>; Fri, 2 Mar 2012 13:03:21 -0500 (envelope-from <[email protected]>) Authentication-Results: verifier.port25.com; spf=pass [email protected] Authentication-Results: verifier.port25.com; domainkeys=neutral (message not signed) [email protected] Authentication-Results: verifier.port25.com; dkim=neutral (message not signed) Authentication-Results: verifier.port25.com; sender-id=pass [email protected] Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01CCF89E.BE02A069" Subject: test Date: Fri, 2 Mar 2012 21:03:15 +0300 X-MimeOLE: Produced By Microsoft Exchange V6.5 Message-ID: <[email protected]> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: test Thread-Index: Acz4jS34oznvbyFQR4S5rXsNQFvTdg== From: =?koi8-r?B?89XQ0tXOwMsg8MHXxcw=?= <[email protected]> To: <[email protected]> I also checked with [email protected], but it FAILs all the time, no matter which SPF records I make: <s2.corp.delo-company.com #5.7.1 smtp;550 5.7.1 <[email protected]>: Recipient address rejected: SPF Tests: Mail-From Result="softfail": Mail From="[email protected]" HELO name="s2.corp.delo-company.com" HELO Result="softfail" Remote IP="82.209.198.147"> I've filled Gmail form twice, but nothing happens. We do not send spam, only emails for our clients. 2 or 3 times we did mass emails (like New Year Greetings and sales promos) from corp.delo-company.com addresses, but they where all complying to Gmail Bulk Sender's Guide (I mean SPF, Open Relays, Precedence: Bulk and Unsubscribe tags). So, this should be not a problem. Please, help me. What am I doing wrong? UPD: I also tried Unlocktheinbox.com test and the server also fails this test. Here is the result: http://bit.ly/wYr39h . Here is one more http://bit.ly/ypWLjr I also tried to send email from that server manually via telnet and everything is fine. Here is what I type: 220 mx.google.com ESMTP g15si4811326anb.170 HELO s2.corp.delo-company.com 250 mx.google.com at your service MAIL FROM: <[email protected]> 250 2.1.0 OK g15si4811326anb.170 RCPT TO: <[email protected]> 250 2.1.5 OK g15si4811326anb.170 DATA 354 Go ahead g15si4811326anb.170 From: [email protected] To: Pavel <[email protected]> Subject: Test 28 This is telnet test . 250 2.0.0 OK 1330795021 g15si4811326anb.170 QUIT 221 2.0.0 closing connection g15si4811326anb.170 And this is what I get: Delivered-To: [email protected] Received: by 10.227.132.73 with SMTP id a9csp96864wbt; Sat, 3 Mar 2012 09:17:02 -0800 (PST) Received: by 10.101.128.12 with SMTP id f12mr4837125ann.49.1330795021572; Sat, 03 Mar 2012 09:17:01 -0800 (PST) Return-Path: <[email protected]> Received: from s2.corp.delo-company.com (s2.corp.delo-company.com. [82.209.198.147]) by mx.google.com with SMTP id g15si4811326anb.170.2012.03.03.09.15.59; Sat, 03 Mar 2012 09:17:00 -0800 (PST) Received-SPF: pass (google.com: domain of [email protected] designates 82.209.198.147 as permitted sender) client-ip=82.209.198.147; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 82.209.198.147 as permitted sender) [email protected] Date: Sat, 03 Mar 2012 09:17:00 -0800 (PST) Message-Id: <[email protected]> From: [email protected] To: Pavel <[email protected]> Subject: Test 28 This is telnet test

    Read the article

  • Xobni Free Powers Up Outlook’s Search and Contacts

    - by Matthew Guay
    Want to find out more about your contacts, discover email trends, and even sync Yahoo! email accounts in Outlook?  Here’s how you can do this and more with Xobni Free. Email is one of the most important communications mediums today, but even with all of the advances in Outlook over the years it can still be difficult to keep track of conversations, files, and contacts.  Xobni makes it easy by indexing your emails and organizing them by sender.  You can use its powerful search to quickly find any email, find related messages, and then view more information about that contact with information from social networks.  And, to top it off, it even lets you view your Yahoo! emails directly in Outlook without upgrading to a Yahoo! Plus account.  Xobni runs in Outlook 2003, 2007, and 2010, including the 64 bit version of Outlook 2010, and users of older versions will especially enjoy the new features Xobni brings for free. Getting started Download the Xobni Free installer (link below), and run to start the installation.  Make sure to exit Outlook before installing.  Xobni may need to download additional files which may take a few moments. When the download is finished, proceed with the install as normal.  You can opt out of the Product Improvement Program at the end of the installation by unchecking the box.  Additionally, you are asked to share Xobni with your friends on social networks, but this is not required.   Next time you open Outlook, you’ll notice the new Xobni sidebar in Outlook.  You can choose to watch an introduction video that will help you quickly get up to speed on how Xobni works. While this is playing, Xobni is working at indexing your email in the background.  Once the first indexing is finished, click Let’s Go! to start using Xobni. Here’s how Xobni looks in Outlook 2010: Advanced Email Information Select an email, and now you can see lots of info about it in your new Xobni sidebar.   On the top of the sidebar, select the graph icon to see when and how often you email with a contact.  Each contact is given an Xobni rank so you can quickly see who you email the most.   You can see all related emails sorted into conversations, and also all attachments in the conversation, not just this email. Xobni can also show you all scheduled appointments and links exchanged with a contact, but this is only available in the Plus version.  If you’d rather not see the tab for a feature you can’t use, click Don’t show this tab to banish it from Xobni for good.   Searching emails from the Xobni toolbar is very fast, and you can preview a message by simply hovering over it from the search pane. Get More Information About Your Contacts Xobni’s coolest feature is its social integration.  Whenever you select an email, you may see a brief bio, picture, and more, all pulled from social networks.   Select one of the tabs to find more information.  You may need to login to view information on your contacts from certain networks. The Twitter tab lets you see recent tweets.  Xobni will search for related Twitter accounts, and will ask you to confirm if the choice is correct.   Now you can see this contact’s recent Tweets directly from Outlook.   The Hoovers tab can give you interesting information about the businesses you’re in contact with. If the information isn’t correct, you can edit it and add your own information.  Click the Edit button, and the add any information you want.   You can also remove a network you don’t wish to see.  Right-click on the network tabs, select Manage Extensions, and uncheck any you don’t want to see. But sometimes online contact just doesn’t cut it.  For these times, click on the orange folder button to request a contact’s phone number or schedule a time with them. This will open a new email message ready to send with the information you want.  Edit as you please, and send. Add Yahoo! Email to Outlook for Free One of Xobni’s neatest features is that it let’s you add your Yahoo! email account to Outlook for free.  Click the gear icon in the bottom of the Xobni sidebar and select Options to set it up. Select the Integration tab, and click Enable to add Yahoo! mail to Xobni. Sign in with your Yahoo! account, and make sure to check the Keep me signed in box. Note that you may have to re-signin every two weeks to keep your Yahoo! account connected.  Select I agree to finish setting it up. Xobni will now download and index your recent Yahoo! mail. Your Yahoo! messages will only show up in the Xobni sidebar.  Whenever you select a contact, you will see related messages from your Yahoo! account as well.  Or, you can search from the sidebar to find individual messages from your Yahoo! account.  Note the Y! logo beside Yahoo! messages.   Select a message to read it in the Sidebar.  You can open the email in Yahoo! in your browser, or can reply to it using your default Outlook email account. If you have many older messages in your Yahoo! account, make sure to go back to the Integration tab and select Index Yahoo! Mail to index all of your emails. Conclusion Xobni is a great tool to help you get more out of your daily Outlook experience.  Whether you struggle to find attachments a coworker sent you or want to access Yahoo! email from Outlook, Xobni might be the perfect tool for you.  And with the extra things you learn about your contacts with the social network integration, you might boost your own PR skills without even trying! Link Download Xobni Similar Articles Productive Geek Tips Speed up Windows Vista Start Menu Search By Limiting ResultsFix for New Contact Group Button Not Displaying in VistaGet Maps and Directions to Your Contacts in Outlook 2007Backup Windows Mail Messages and Contacts in VistaHow to Import Gmail Contacts Into Outlook 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs

    Read the article

  • Rails, gmail: howto get plain/text from body

    - by atmorell
    Hello, I am loading am email with IMAP and parsing it with mail. This works very well, however the mail.body.decoded field contains a lot of formatting. How do I dig out the plain/txt body of the email - ignore attachements, formatting etc. It works fine if I try with an email without html. source = imap.uid_fetch(uid, ['RFC822']).first.attr['RFC822'] mail = Mail.new(source) This body content looks like this: Mail::Body:0x7f36ed468270 @epilogue="", @boundary="_004_4C49171DCB8C4540844E69DD39FDD98Ffirm_", @encoding="7bit", @raw_source="--_004_4C49171DCB8C4540844E69DD39FDD98Ffirm_\r\nContent-Type: multipart/alternative;\r\n\tboundary=\"_000_4C49171DCB8C4540844E69DD39FDD98Ffirm_\"\r\n\r\n--_000_4C49171DCB8C4540844E69DD39FDD98Ffirm_\r\nContent-Type: text/plain; charset=\"iso-8859-1\"\r\nContent-Transfer-Encoding: quoted-printable\r\n\r\ndasdsasda\r\n\r\n\r\n\r\nMed venlig hilsen / Med V=E4nlig H=E4lsning / Best Regards\r\r\nAsbj=F8rn Toke Morell. .\r\n+45 7020 0160\r\n+45 2152 0015\r\n[cid:[email protected]]\r\nhttp://www..dk\r\n\r\n\r\n--_000_4C49171DCB8C4540844E69DD39FDD98Ffirm_\r\nContent-Type: text/html; charset=\"iso-8859-1\"\r\nContent-Transfer-Encoding: quoted-printable\r\n\r\n<html>headheadbody style3D"word-wrap: break-word; -webkit-nbsp-mode:=\r\n space; -webkit-line-break: after-white-space; ">dasdsasda<br><div apple-co=\r\nntent-edited=3D"true">\r\n<span class=3D"Apple-style-span" style=3D"border-collapse: separate; color:=\r\n rgb(0, 0, 0); font-family: Helvetica; font-size: medium; font-style: norma=\r\nl; font-variant: normal; font-weight: normal; letter-spacing: normal; line-=\r\nheight: normal; orphans: 2; text-align: auto; text-indent: 0px; text-transf=\r\norm: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-borde=\r\nr-horizontal-spacing: 0px; -webkit-border-vertical-spacing: 0px; -webkit-te=\r\nxt-decorations-in-effect: none; -webkit-text-size-adjust: auto; -webkit-tex=\r\nt-stroke-width: 0px; "><span class=3D"Apple-style-span" style=3D"font-famil=\r\ny: Calibri, sans-serif; font-size: 15px; "><span class=3D"Apple-style-span"=\r\n style=3D"border-collapse: separate; color: rgb(0, 0, 0); font-family: Helv=\r\netica; font-size: medium; font-style: normal; font-variant: normal; font-we=\r\night: normal; letter-spacing: normal; line-height: normal; orphans: 2; text=\r\n-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-sp=\r\nacing: 0px; -webkit-border-horizontal-spacing: 0px; -webkit-border-vertical=\r\n-spacing: 0px; -webkit-text-decorations-in-effect: none; -webkit-text-size-=\r\nadjust: auto; -webkit-text-stroke-width: 0px; "><span class=3D"Apple-style-=\r\nspan" style=3D"font-family: Calibri, sans-serif; font-size: 15px; "><div st=\r\nyle=3D"margin-top: 0cm; margin-right: 0cm; margin-bottom: 0.0001pt; margin-=\r\nleft: 0cm; font-size: 11pt; font-family: Calibri, sans-serif; "><font class=\r\n=3D"Apple-style-span" color=3D"#000080" face=3D"'Times New Roman', serif" s=\r\nize=3D"3"><span class=3D"Apple-style-span" style=3D"font-size: 13px; "><br =\r\nclass=3D"Apple-interchange-newline"><br></span></font></div><div style=3D"m=\r\nargin-top: 0cm; margin-right: 0cm; margin-bottom: 0.0001pt; margin-left: 0c=\r\nm; font-size: 11pt; font-family: Calibri, sans-serif; "><font class=3D"Appl=\r\ne-style-span" color=3D"#000080" face=3D"'Times New Roman', serif" size=3D"3=\r\n"><span class=3D"Apple-style-span" style=3D"font-size: 13px; "><br></span><=\r\n/font></div><div style=3D"margin-top: 0cm; margin-right: 0cm; margin-bottom=\r\n: 0.0001pt; margin-left: 0cm; font-size: 11pt; font-family: Calibri, sans-s=\r\nerif; "><span style=3D"font-size: 10pt; font-family: 'Times New Roman', ser=\r\nif; color: navy; ">Med venlig hilsen / Med V=E4nlig H=E4lsning / Best Regar=\r\nds&nbsp;<br>firm<br>Asbj=F8rn Toke Morell... This is the ony relevant from information from the body: 'ndasdsasda\r\n\r\n\r\n\r\nMed venlig hilsen / Med V=E4nlig H=E4lsning / Best Regards\r\r\nAsbj=F8rn Toke Morell' Any ideas?

    Read the article

  • Hibernate mapping one-to-many problem

    - by Xorty
    Hello, I am not very experienced with Hibernate and I am trying to create one-to-many mapping. Here are relevant tables: And here are my mapping files: <hibernate-mapping package="com.xorty.mailclient.server.domain"> <class name="Attachment" table="Attachment"> <id name="id"> <column name="idAttachment"></column> </id> <property name="filename"> <column name="name"></column> </property> <property name="blob"> <column name="file"></column> <type name="blob"></type> </property> <property name="mailId"> <column name="mail_idmail"></column> </property> </class> </hibernate-mapping> <hibernate-mapping> <class name="com.xorty.mailclient.server.domain.Mail" table="mail"> <id name="id" type="integer" column="idmail"></id> <property name="content"> <column name="body"></column> </property> <property name="ownerAddress"> <column name="account_address"></column> </property> <property name="title"> <column name="head"></column> </property> <set name="receivers" table="mail_has_contact" cascade="all"> <key column="mail_idmail"></key> <many-to-many column="contact_address" class="com.xorty.mailclient.client.domain.Contact"></many-to-many> </set> <list name="attachments" cascade="save-update, delete" inverse="true"> <key column="mail_idmail" not-null="true"/> <index column="fk_Attachment_mail1"></index> <one-to-many class="com.xorty.mailclient.server.domain.Attachment"/> </list> </class> </hibernate-mapping> In plain english, one mail has more attachments. When I try to do CRUD on mail without attachments, everyting works just fine. When I add some attachment to mail, I cannot perform any CRUD operation. I end up with following trace: org.hibernate.exception.ConstraintViolationException: Could not execute JDBC batch update at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:96) at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66) at org.hibernate.jdbc.AbstractBatcher.executeBatch(AbstractBatcher.java:275) at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:268) at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:184) at org.hibernate.event.def.AbstractFlushingEventListener.performExecutions(AbstractFlushingEventListener.java:321) at org.hibernate.event.def.DefaultFlushEventListener.onFlush(DefaultFlushEventListener.java:51) at org.hibernate.impl.SessionImpl.flush(SessionImpl.java:1216) at org.hibernate.impl.SessionImpl.managedFlush(SessionImpl.java:383) at org.hibernate.transaction.JDBCTransaction.commit(JDBCTransaction.java:133) at domain.DatabaseTest.testPersistMailWithAttachment(DatabaseTest.java:355) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at junit.framework.TestCase.runTest(TestCase.java:168) at junit.framework.TestCase.runBare(TestCase.java:134) at junit.framework.TestResult$1.protect(TestResult.java:110) at junit.framework.TestResult.runProtected(TestResult.java:128) at junit.framework.TestResult.run(TestResult.java:113) at junit.framework.TestCase.run(TestCase.java:124) at junit.framework.TestSuite.runTest(TestSuite.java:232) at junit.framework.TestSuite.run(TestSuite.java:227) at org.junit.internal.runners.JUnit38ClassRunner.run(JUnit38ClassRunner.java:83) at org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.run(JUnit4TestReference.java:49) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:467) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:683) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:390) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:197) Caused by: java.sql.BatchUpdateException: Cannot add or update a child row: a foreign key constraint fails (`maildb`.`attachment`, CONSTRAINT `fk_Attachment_mail1` FOREIGN KEY (`mail_idmail`) REFERENCES `mail` (`idmail`) ON DELETE NO ACTION ON UPDATE NO ACTION) at com.mysql.jdbc.PreparedStatement.executeBatchSerially(PreparedStatement.java:1666) at com.mysql.jdbc.PreparedStatement.executeBatch(PreparedStatement.java:1082) at org.hibernate.jdbc.BatchingBatcher.doExecuteBatch(BatchingBatcher.java:70) at org.hibernate.jdbc.AbstractBatcher.executeBatch(AbstractBatcher.java:268) ... 27 more Thank you

    Read the article

  • CodePlex Daily Summary for Friday, August 22, 2014

    CodePlex Daily Summary for Friday, August 22, 2014Popular ReleasesQuickMon: Version 3.22: This release add two important changes. 1. Config variables at the monitor pack level (global to entire monitor pack for all Collectors) 2. The QuickMon (Windows) service now automatically reloads monitor packs that have been changed since it was started. This means you don't have to restart the service for changes to take effect.SSIS ReportGeneratorTask: ReportGenerator Task 1.8: New version of the SSIS Report Generator Task that supports SQL Server 2008, 2012 and 2014. In addition to minor bug fixes Multi-Value Parameters and Execution Information were integrated. The complete variable and parameter assignment is now a string and can be set dynamically.Corefig for Windows Server 2012 Core and Hyper-V Server 2012: Corefig 1.1.2 ISO: FixesUpdated Hyper-V scripts to use version 2 of the WMI tree. Updated the Hyper-V check for saved VM to look for the proper identifier. Fixed text issues with the licensing tab (thanks to briangw for rooting this problem out). EnhancementsNew (and improved) version number in Corefig.psd1.Outlook 2013 Backup Add-In: Outlook Backup Add-In 1.3: Changelog for new version: Added button in config-window to reset the last backup-time (this will trigger the backup after closing outlook) Minimum interval set to 0 (backup at each closing of outlook) Catch exception when data store entry is corrupt Added two parameters (prefix and suffix) to automatically rename the backup file Updated VSTO-Runtime to 10.0.50325 Upgraded project to Visual Studio 2013 Added optional command to run after backup (e.g. pack backup files, ...) Add...babelua: 1.6.7.0: V1.6.7.0 - 2014.8.21New feature: add a file search window ( ctrl+1 or ALT+L ), like The file search in VC Assistant; Stability improvement: performance improvement when BabeLua load/unload; performance improvement when debugger load lua files;File Explorer for WPF: FileExplorer3_20August2014: Please see Aug14 Update.Open NFe: RDI Open NFe 3.0 (alpha): Atualização para o layout 3.10 da NFe.ODBC Connect: v1.0: ODBC Connect executables for both 32bit and 64bit ODBC data sourcesMSSQL Deployment Tool: Microsoft SQL Deploy Tool v1.3.1: MicrosoftSqlDeployTool: v1.3.1.38348 What's changed? Update namespace and assembly name. Bug fixing.SharePoint 2013 Search Query Tool: SharePoint 2013 Search Query Tool v2.1: Layout improvements Bug fixes Stores auth method and user name Moved experimental settings to Advanced boxCtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.2.41183 Alpha: This alpha of the CtrlAltStudio Viewer provides some preliminary Oculus Rift DK2 support. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-2-41183-alpha Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of Second Life.HDD Guardian: HDD Guardian 0.6.1: New: package now include smartctl 6.3; Removed: standard notification e-mail. Now you have to set your mail server to send e-mail alerts; Bugfix: USB detection error; custom e-mail server settings issue; bottom panel displays a wrong ATA error count.VG-Ripper & PG-Ripper: VG-Ripper 2.9.62: changes NEW: Added Support for 'MadImage.org' links NEW: Added Support for 'ImgSpot.org' links NEW: Added Support for 'ImgClick.net' links NEW: Added Support for 'Imaaage.com' links NEW: Added Support for 'Image-Bugs.com' links NEW: Added Support for 'Pictomania.org' links NEW: Added Support for 'ImgDap.com' links NEW: Added Support for 'FileSpit.com' links FIXED: 'ImgSee.me' linksMagick.NET: Magick.NET 7.0.0.0001: Magick.NET linked with ImageMagick 7-Beta.CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...Fluentx: Fluentx v1.5.3: Added few more extension methods.fastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.New Projects1thManage: GDT for erevery oneCreateProjectOnCodePlex: This is the first project for CoderCamps.HEAD FIRST C# LAB 1 : A DAY AT THE RACES: This has been provided for educational purposes and general discussion to improve coding practices associated with the resources detailed within Head First C#.Introduce Audit logging to your EF application using Repository & Unit of Work: Introduce Auditing in your application that uses Entity Framework by utilizing the Repository and Unit of Work design patterns.License Registration (C++): Allow to create demo version, activate or not a module.MS Word SharepointWiki Plugin: Scope of the Plugin is to enable a Post to a Sharepoint Wiki from within MS Word with Formatted Text and Images.Send My Zip: This app will help you to send the files were zipped then send the email about password information. This project is currently in setup mode and only availablewinhttp: this is a project for http/https download.Wix Builder: WixBuilder focusses on easily generating a WiX script from a project ouput, compile and link it into msi installer using the WiX Toolset.XiamiSig: ????????。

    Read the article

  • FreeBSD performance tuning. Sysctls, loader.conf, kernel

    - by SaveTheRbtz
    I wanted to share knowledge of tuning FreeBSD via sysctl.conf/loader.conf/KENCONF. It was initially based on Igor Sysoev's (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Tunings are for FreeBSD-CURRENT. Since 7.2 amd64 some of them are tuned well by default. Prior 7.0 some of them are boot only (set via /boot/loader.conf) or does not exist at all. sysctl.conf: # No zero mapping feature # May break wine # (There are also reports about broken samba3) #security.bsd.map_at_zero=0 # If you have really busy webserver with apache13 you may run out of processes #kern.maxproc=10000 # Same for servers with apache2 / Pound #kern.threads.max_threads_per_proc=4096 # Max. backlog size kern.ipc.somaxconn=4096 # Shared memory // 7.2+ can use shared memory > 2Gb kern.ipc.shmmax=2147483648 # Sockets kern.ipc.maxsockets=204800 # Can cause this on older kernels: # http://old.nabble.com/Significant-performance-regression-for-increased-maxsockbuf-on-8.0-RELEASE-tt26745981.html#a26745981 ) kern.ipc.maxsockbuf=10485760 # Mbuf 2k clusters (on amd64 7.2+ 25600 is default) # For such high value vm.kmem_size must be increased to 3G kern.ipc.nmbclusters=262144 # Jumbo pagesize(_SC_PAGESIZE) clusters # Used as general packet storage for jumbo frames # can be monitored via `netstat -m` #kern.ipc.nmbjumbop=262144 # Jumbo 9k/16k clusters # If you are using them #kern.ipc.nmbjumbo9=65536 #kern.ipc.nmbjumbo16=32768 # For lower latency you can decrease scheduler's maximum time slice # default: stathz/10 (~ 13) #kern.sched.slice=1 # Increase max command-line length showed in `ps` (e.g for Tomcat/Java) # Default is PAGE_SIZE / 16 or 256 on x86 # This avoids commands to be presented as [executable] in `ps` # For more info see: http://www.freebsd.org/cgi/query-pr.cgi?pr=120749 kern.ps_arg_cache_limit=4096 # Every socket is a file, so increase them kern.maxfiles=204800 kern.maxfilesperproc=200000 kern.maxvnodes=200000 # On some systems HPET is almost 2 times faster than default ACPI-fast # Useful on systems with lots of clock_gettime / gettimeofday calls # See http://old.nabble.com/ACPI-fast-default-timecounter,-but-HPET-83--faster-td23248172.html # After revision 222222 HPET became default: http://svnweb.freebsd.org/base?view=revision&revision=222222 kern.timecounter.hardware=HPET # Small receive space, only usable on http-server, on file server this # should be increased to 65535 or even more #net.inet.tcp.recvspace=8192 # This is useful on Fat-Long-Pipes #net.inet.tcp.recvbuf_max=10485760 #net.inet.tcp.recvbuf_inc=65535 # Small send space is useful for http servers that serve small files # Autotuned since 7.x net.inet.tcp.sendspace=16384 # This is useful on Fat-Long-Pipes #net.inet.tcp.sendbuf_max=10485760 #net.inet.tcp.sendbuf_inc=65535 # Turn off receive autotuning # You can play with it. #net.inet.tcp.recvbuf_auto=0 #net.inet.tcp.sendbuf_auto=0 # This should be enabled if you going to use big spaces (>64k) # Also timestamp field is useful when using syncookies net.inet.tcp.rfc1323=1 # Turn this off on high-speed, lossless connections (LAN 1Gbit+) # If you set it there is no need in TCP_NODELAY sockopt (see man tcp) net.inet.tcp.delayed_ack=0 # This feature is useful if you are serving data over modems, Gigabit Ethernet, # or even high speed WAN links (or any other link with a high bandwidth delay product), # especially if you are also using window scaling or have configured a large send window. # Automatically disables on small RTT ( http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_subr.c?#rev1.237 ) # This sysctl was removed in 10-CURRENT: # See: http://www.mail-archive.com/[email protected]/msg06178.html #net.inet.tcp.inflight.enable=0 # TCP slowstart algorithm tunings # We assuming we have very fast clients #net.inet.tcp.slowstart_flightsize=100 #net.inet.tcp.local_slowstart_flightsize=100 # Disable randomizing of ports to avoid false RST # Before usage check SA here www.bsdcan.org/2006/papers/ImprovingTCPIP.pdf # (it's also says that port randomization auto-disables at some conn.rates, but I didn't checked it thou) #net.inet.ip.portrange.randomized=0 # Increase portrange # For outgoing connections only. Good for seed-boxes and ftp servers. net.inet.ip.portrange.first=1024 net.inet.ip.portrange.last=65535 # # stops route cache degregation during a high-bandwidth flood # http://www.freebsd.org/doc/en/books/handbook/securing-freebsd.html #net.inet.ip.rtexpire=2 net.inet.ip.rtminexpire=2 net.inet.ip.rtmaxcache=1024 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # # There is also good example of sysctl.conf with comments: # http://www.thern.org/projects/sysctl.conf # # icmp may NOT rst, helpful for those pesky spoofed # icmp/udp floods that end up taking up your outgoing # bandwidth/ifqueue due to all that outgoing RST traffic. # #net.inet.tcp.icmp_may_rst=0 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # IPv6 Security # For more info see http://www.fosslc.org/drupal/content/security-implications-ipv6 # Disable Node info replies # To see this vulnerability in action run `ping6 -a sglAac ::1` or `ping6 -w ::1` on unprotected node net.inet6.icmp6.nodeinfo=0 # Turn on IPv6 privacy extensions # For more info see proposal http://unix.derkeiler.com/Mailing-Lists/FreeBSD/net/2008-06/msg00103.html net.inet6.ip6.use_tempaddr=1 net.inet6.ip6.prefer_tempaddr=1 # Disable ICMP redirect net.inet6.icmp6.rediraccept=0 # Disable acceptation of RA and auto linklocal generation if you don't use them #net.inet6.ip6.accept_rtadv=0 #net.inet6.ip6.auto_linklocal=0 # Increases default TTL, sometimes useful # Default is 64 net.inet.ip.ttl=128 # Lessen max segment life to conserve resources # ACK waiting time in miliseconds # (default: 30000. RFC from 1979 recommends 120000) net.inet.tcp.msl=5000 # Max bumber of timewait sockets net.inet.tcp.maxtcptw=200000 # Don't use tw on local connections # As of 15 Apr 2009. Igor Sysoev says that nolocaltimewait has some buggy realization. # So disable it or now till get fixed #net.inet.tcp.nolocaltimewait=1 # FIN_WAIT_2 state fast recycle net.inet.tcp.fast_finwait2_recycle=1 # Time before tcp keepalive probe is sent # default is 2 hours (7200000) #net.inet.tcp.keepidle=60000 # Should be increased until net.inet.ip.intr_queue_drops is zero net.inet.ip.intr_queue_maxlen=4096 # Interrupt handling via multiple CPU, but with context switch. # You can play with it. Default is 1; #net.isr.direct=0 # This is for routers only #net.inet.ip.forwarding=1 #net.inet.ip.fastforwarding=1 # This speed ups dummynet when channel isn't saturated net.inet.ip.dummynet.io_fast=1 # Increase dummynet(4) hash #net.inet.ip.dummynet.hash_size=2048 #net.inet.ip.dummynet.max_chain_len # Should be increased when you have A LOT of files on server # (Increase until vfs.ufs.dirhash_mem becomes lower) vfs.ufs.dirhash_maxmem=67108864 # Note from commit http://svn.freebsd.org/base/head@211031 : # For systems with RAID volumes and/or virtualization envirnments, where # read performance is very important, increasing this sysctl tunable to 32 # or even more will demonstratively yield additional performance benefits. vfs.read_max=32 # Explicit Congestion Notification (see http://en.wikipedia.org/wiki/Explicit_Congestion_Notification) net.inet.tcp.ecn.enable=1 # Flowtable - flow caching mechanism # Useful for routers #net.inet.flowtable.enable=1 #net.inet.flowtable.nmbflows=65535 # Extreme polling tuning #kern.polling.burst_max=1000 #kern.polling.each_burst=1000 #kern.polling.reg_frac=100 #kern.polling.user_frac=1 #kern.polling.idle_poll=0 # IPFW dynamic rules and timeouts tuning # Increase dyn_buckets till net.inet.ip.fw.curr_dyn_buckets is lower net.inet.ip.fw.dyn_buckets=65536 net.inet.ip.fw.dyn_max=65536 net.inet.ip.fw.dyn_ack_lifetime=120 net.inet.ip.fw.dyn_syn_lifetime=10 net.inet.ip.fw.dyn_fin_lifetime=2 net.inet.ip.fw.dyn_short_lifetime=10 # Make packets pass firewall only once when using dummynet # i.e. packets going thru pipe are passing out from firewall with accept #net.inet.ip.fw.one_pass=1 # shm_use_phys Wires all shared pages, making them unswappable # Use this to lessen Virtual Memory Manager's work when using Shared Mem. # Useful for databases #kern.ipc.shm_use_phys=1 # ZFS # Enable prefetch. Useful for sequential load type i.e fileserver. # FreeBSD sets vfs.zfs.prefetch_disable to 1 on any i386 systems and # on any amd64 systems with less than 4GB of avaiable memory # For additional info check this nabble thread http://old.nabble.com/Samba-read-speed-performance-tuning-td27964534.html #vfs.zfs.prefetch_disable=0 # On highload servers you may notice following message in dmesg: # "Approaching the limit on PV entries, consider increasing either the # vm.pmap.shpgperproc or the vm.pmap.pv_entry_max tunable" vm.pmap.shpgperproc=2048 loader.conf: # Accept filters for data, http and DNS requests # Useful when your software uses select() instead of kevent/kqueue or when you under DDoS # DNS accf available on 8.0+ accf_data_load="YES" accf_http_load="YES" accf_dns_load="YES" # Async IO system calls aio_load="YES" # Linux specific devices in /dev # As for 8.1 it only /dev/full #lindev_load="YES" # Adds NCQ support in FreeBSD # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ # 8.0+ only #ahci_load="YES" #siis_load="YES" # FreeBSD 8.2+ # New Congestion Control for FreeBSD # http://caia.swin.edu.au/urp/newtcp/tools/cc_chd-readme-0.1.txt # http://www.ietf.org/proceedings/78/slides/iccrg-5.pdf # Initial merge commit message http://www.mail-archive.com/[email protected]/msg31410.html #cc_chd_load="YES" # Increase kernel memory size to 3G. # # Use ONLY if you have KVA_PAGES in kernel configuration, and you have more than 3G RAM # Otherwise panic will happen on next reboot! # # It's required for high buffer sizes: kern.ipc.nmbjumbop, kern.ipc.nmbclusters, etc # Useful on highload stateful firewalls, proxies or ZFS fileservers # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #vm.kmem_size="3G" # If your server has lots of swap (>4Gb) you should increase following value # according to http://lists.freebsd.org/pipermail/freebsd-hackers/2009-October/029616.html # Otherwise you'll be getting errors # "kernel: swap zone exhausted, increase kern.maxswzone" # kern.maxswzone="256M" # Older versions of FreeBSD can't tune maxfiles on the fly #kern.maxfiles="200000" # Useful for databases # Sets maximum data size to 1G # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #kern.maxdsiz="1G" # Maximum buffer size(vfs.maxbufspace) # You can check current one via vfs.bufspace # Should be lowered/upped depending on server's load-type # Usually decreased to preserve kmem # (default is 10% of mem) #kern.maxbcache="512M" # Sendfile buffers # For i386 only #kern.ipc.nsfbufs=10240 # FreeBSD 9+ # HPET "legacy route" support. It should allow HPET to work per-CPU # See http://www.mail-archive.com/[email protected]/msg03603.html #hint.atrtc.0.clock=0 #hint.attimer.0.clock=0 #hint.hpet.0.legacy_route=1 # syncache Hash table tuning net.inet.tcp.syncache.hashsize=1024 net.inet.tcp.syncache.bucketlimit=512 net.inet.tcp.syncache.cachelimit=65536 # Increased hostcache # Later host cache can be viewed via net.inet.tcp.hostcache.list hidden sysctl # Very useful for it's RTT RTTVAR # Must be power of two net.inet.tcp.hostcache.hashsize=65536 # hashsize * bucketlimit (which is 30 by default) # It allocates 255Mb (1966080*136) of RAM net.inet.tcp.hostcache.cachelimit=1966080 # TCP control-block Hash table tuning net.inet.tcp.tcbhashsize=4096 # Disable ipfw deny all # Should be uncommented when there is a chance that # kernel and ipfw binary may be out-of sync on next reboot #net.inet.ip.fw.default_to_accept=1 # # SIFTR (Statistical Information For TCP Research) is a kernel module that # logs a range of statistics on active TCP connections to a log file. # See prerelease notes http://groups.google.com/group/mailing.freebsd.current/browse_thread/thread/b4c18be6cdce76e4 # and man 4 sitfr #siftr_load="YES" # Enable superpages, for 7.2+ only # Also read http://lists.freebsd.org/pipermail/freebsd-hackers/2009-November/030094.html vm.pmap.pg_ps_enabled=1 # Usefull if you are using Intel-Gigabit NIC #hw.em.rxd=4096 #hw.em.txd=4096 #hw.em.rx_process_limit="-1" # Also if you have ALOT interrupts on NIC - play with following parameters # NOTE: You should set them for every NIC #dev.em.0.rx_int_delay: 250 #dev.em.0.tx_int_delay: 250 #dev.em.0.rx_abs_int_delay: 250 #dev.em.0.tx_abs_int_delay: 250 # There is also multithreaded version of em/igb drivers can be found here: # http://people.yandex-team.ru/~wawa/ # # for additional em monitoring and statistics use # sysctl dev.em.0.stats=1 ; dmesg # sysctl dev.em.0.debug=1 ; dmesg # Also after r209242 (-CURRENT) there is a separate sysctl for each stat variable; # Same tunings for igb #hw.igb.rxd=4096 #hw.igb.txd=4096 #hw.igb.rx_process_limit=100 # Some useful netisr tunables. See sysctl net.isr #net.isr.maxthreads=4 #net.isr.defaultqlimit=4096 #net.isr.maxqlimit: 10240 # Bind netisr threads to CPUs #net.isr.bindthreads=1 # # FreeBSD 9.x+ # Increase interface send queue length # See commit message http://svn.freebsd.org/viewvc/base?view=revision&revision=207554 #net.link.ifqmaxlen=1024 # Nicer boot logo =) loader_logo="beastie" And finally here is KERNCONF: # Just some of them, see also # cat /sys/{i386,amd64,}/conf/NOTES # This one useful only on i386 #options KVA_PAGES=512 # You can play with HZ in environments with high interrupt rate (default is 1000) # 100 is for my notebook to prolong it's battery life #options HZ=100 # Polling is goot on network loads with high packet rates and low-end NICs # NB! Do not enable it if you want more than one netisr thread #options DEVICE_POLLING # Eliminate datacopy on socket read-write # To take advantage with zero copy sockets you should have an MTU >= 4k # This req. is only for receiving data. # Read more in man zero_copy_sockets # Also this epic thread on kernel trap: # http://kerneltrap.org/node/6506 # Here Linus says that "anybody that does it that way (FreeBSD) is totally incompetent" #options ZERO_COPY_SOCKETS # Support TCP sign. Used for IPSec options TCP_SIGNATURE # There was stackoverflow found in KAME IPSec stack: # See http://secunia.com/advisories/43995/ # For quick workaround you can use `ipfw add deny proto ipcomp` options IPSEC # This ones can be loaded as modules. They described in loader.conf section #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # Adding ipfw, also can be loaded as modules options IPFIREWALL # On 8.1+ you can disable verbose to see blocked packets on ipfw0 interface. # Also there is no point in compiling verbose into the kernel, because # now there is net.inet.ip.fw.verbose tunable. #options IPFIREWALL_VERBOSE #options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_FORWARD # Adding kernel NAT options IPFIREWALL_NAT options LIBALIAS # Traffic shaping options DUMMYNET # Divert, i.e. for userspace NAT options IPDIVERT # This is for OpenBSD's pf firewall device pf device pflog # pf's QoS - ALTQ options ALTQ options ALTQ_CBQ # Class Bases Queuing (CBQ) options ALTQ_RED # Random Early Detection (RED) options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC) options ALTQ_PRIQ # Priority Queuing (PRIQ) options ALTQ_NOPCC # Required for SMP build # Pretty console # Manual can be found here http://forums.freebsd.org/showthread.php?t=6134 #options VESA #options SC_PIXEL_MODE # Disable reboot on Ctrl Alt Del #options SC_DISABLE_REBOOT # Change normal|kernel messages color options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK) # More scroll space options SC_HISTORY_SIZE=8192 # Adding hardware crypto device device crypto device cryptodev # Useful network interfaces device vlan device tap #Virtual Ethernet driver device gre #IP over IP tunneling device if_bridge #Bridge interface device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPsec interface device lagg #Link aggregation interface device stf #IPv4-IPv6 port # Also for my notebook, but may be used with Opteron device amdtemp # Same for Intel processors device coretemp # man 4 cpuctl device cpuctl # CPU control pseudo-device # Support for ECMP. More than one route for destination # Works even with default route so one can use it as LB for two ISP # For now code is unstable and panics (panic: rtfree 2) on route deletions. #options RADIX_MPATH # Multicast routing #options MROUTING #options PIM # Debug & DTrace options KDB # Kernel debugger related code options KDB_TRACE # Print a stack trace for a panic options KDTRACE_FRAME # amd64-only(?) options KDTRACE_HOOKS # all architectures - enable general DTrace hooks #options DDB #options DDB_CTF # all architectures - kernel ELF linker loads CTF data # Adaptive spining in lockmgr (8.x+) # See http://www.mail-archive.com/[email protected]/msg10782.html options ADAPTIVE_LOCKMGRS # UTF-8 in console (8.x+) #options TEKEN_UTF8 # FreeBSD 8.1+ # Deadlock resolver thread # For additional information see http://www.mail-archive.com/[email protected]/msg18124.html # (FYI: "resolution" is panic so use with caution) #options DEADLKRES # Increase maximum size of Raw I/O and sendfile(2) readahead #options MAXPHYS=(1024*1024) #options MAXBSIZE=(1024*1024) # For scheduler debug enable following option. # Debug will be available via `kern.sched.stats` sysctl # For more information see http://svnweb.freebsd.org/base/head/sys/conf/NOTES?view=markup #options SCHED_STATS If you are tuning network for maximum performance you may wish to play with ifconfig options like: # You can list all capabilities via `ifconfig -m` ifconfig [-]rxcsum [-]txcsum [-]tso [-]lro mtu In case you've enabled DDB in kernel config, you should edit your /etc/ddb.conf and add something like this to enable automatic reboot (and textdump as bonus): script kdb.enter.panic=textdump set; capture on; show pcpu; bt; ps; alltrace; capture off; call doadump; reset script kdb.enter.default=textdump set; capture on; bt; ps; capture off; call doadump; reset And do not forget to add ddb_enable="YES" to /etc/rc.conf Since FreeBSD 9 you can select to enable/disable flowcontrol on your NIC: # See http://en.wikipedia.org/wiki/Ethernet_flow_control and # http://www.mail-archive.com/[email protected]/msg07927.html for additional info ifconfig bge0 media auto mediaopt flowcontrol PS. Also most of FreeBSD's limits can be monitored by # vmstat -z and # limits PPS. variety of network counters can be monitored via # netstat -s In FreeBSD-9 netstat's -Q option appeared, try following command to display netisr stats # netstat -Q PPPS. also see # man 7 tuning PPPPS. I wanted to thank FreeBSD community, especially author of nginx - Igor Sysoev, nginx-ru@ and FreeBSD-performance@ mailing lists for providing useful information about FreeBSD tuning. FreeBSD WIP * Whats cooking for FreeBSD 7? * Whats cooking for FreeBSD 8? * Whats cooking for FreeBSD 9? So here is the question: What tunings are you using on yours FreeBSD servers? You can also post your /etc/sysctl.conf, /boot/loader.conf, kernel options, etc with description of its' meaning (do not copy-paste from sysctl -d). Don't forget to specify server type (web, smb, gateway, etc) Let's share experience!

    Read the article

  • Designing an email system to guarantee delivery

    - by GlenH7
    We are looking to expand our use of email for notification purposes. We understand it will generate more inbox volume, but we are being selective about which events we fire notification on in order to keep the signal-to-noise ratio high. The big question we are struggling with is designing a system that guarantees that the email was delivered. If an email isn't delivered, we will consider that an exception event that needs to be investigated. In reality, I say almost guarantees because there aren't any true guarantees with email. We're just looking for a practical solution to making sure the email got there and experiences others have had with the various approaches to guaranteeing delivery. For the TL;DR crowd - how do we go about designing a system to guarantee delivery of emails? What techniques should we consider so we know the emails were delivered? Our biggest area of concern is what techniques to use so that we know when a message is sent out that it either lands in an inbox or it failed and we need to do something else. Additional requirements: We're not at the stage of including an escalation response, but we'll want that in the future or so we think. Most notifications will be internal to our enterprise, but we will have some notifications being sent to external clients. Some of our application is in a hosted environment. We haven't determined if those servers can access our corporate email servers for relaying or if they'll be acting as their own mail servers. Base design / modules (at the moment): A module to assign tracking identification A module to send out emails A module to receive delivery notification (perhaps this is the same as the email module) A module that checks sent messages against delivery notification and alerts on undelivered email. Some references: Atwood: Send some email Email Tracking Some approaches: Request a response (aka read-receipt or Message Disposition Notification). Seems prone to failure since we have cross-compatibility issues due to differing mail servers and software. Return receipt (aka Delivery Status Notification). Not sure if all mail servers honor this request or not Require an action and therefore prove reply. Seems burdensome to force the recipients to perform an additional task not related to resolving the issue. And no, we haven't come up with a way of linking getting the issue fixed to whether or not the email was received. Force a click-through / Other site sign-in. Similar to requiring some sort of action, this seems like an additional burden and will annoy the users. On the other hand, it seems the most likely to guarantee someone received the notification. Hidden image tracking. Not all email providers automatically load the image, and how would we associate the image(s) with the email tracking ID? Outsource delivery. This gets us out of the email business, but goes back to how to guarantee the out-sourcer's receipt and subsequent delivery to the end recipient. As a related concern, there will be an n:n relationship between issue notification and recipients. The 1 issue : n recipients subset isn't as much of a concern although if we had a delivery failure we would want to investigate and fix the core issue. Of bigger concern is n issues : 1 recipient, and we're specifically concerned in making sure that all n issues were received by the recipient. How does forum software or issue tracking software handle this requirement? If a tracking identifier is used, Where is it placed in the email? In the Subject, or the Body?

    Read the article

  • Save the Date - Oracle Partner Community Forum: Exadata, Exalogic and Manageability, Vienna, 23-24 April 2013

    - by Javier Puerta
    Hardware and Software Engineered to Work Together .Ritu { font-family: Arial, Helvetica, sans-serif; } .Ritu { font-family: Arial, Helvetica, sans-serif; } .Ritu { font-family: Arial, Helvetica, sans-serif; } body,td,th { font-family: Arial, Helvetica, sans-serif; font-size: x-small; } .color { color: #F00; } .c { color: #F00; } .c { color: #F00; } .c { color: #000; font-size: xx-small; } .c a { color: #F00; } .c { color: #F00; } .cl { color: #F00; } .b { color: #000; font-size: xx-small; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .c { color: #F00; font-size: small; } .b { font-weight: bold; font-size: x-small; } .c { color: #F00; font-size: x-small; } .clr { color: #F00; } .c { color: #F00; } inside the Click Here The order you must follow to make the colored link appear in browsers. If not the default window link will appear 1. Select the word you want to use for the link 2. Select the desired color, Red, Black, etc 3. Select bold if necessary ___________________________________________________________________________________________________________________ Templates use two sizes of fonts and the sans-serif font tag for the email. All Fonts should be (Arial, Helvetica, sans-serif) tags Normal size reading body fonts should be set to the size of 2. Small font sizes should be set to 1 !!!!!!!DO NOT USE ANY OTHER SIZE FONT FOR THE EMAILS!!!!!!!! ___________________________________________________________________________________________________________________ -- Oracle PartnerNetwork | Account | Feedback SAVE THE DATE ORACLE PARTNER COMMUNITY FORUM: EXADATA, EXALOGIC AND MANAGEABILITY 23-24 APRIL 2013, VIENNA, AUSTRIA The 2013 event expands its scope to cover all the building blocks of the Cloud infrastructure: Exadata, Exalogic and Manageability! Dear partner I am delighted to announce the 2013 edition of the Exadata, Exalogic and Manageability Partner Community Forum for EMEA partners which will take place in Vienna, Austria, on April 23-24, 2013. After the experience of last year where we ran a joint Exadata and Manageability event, we received requests from many of you to add also Exalogic to the scope of the forum, and this way to cover the complete infrastructure architecture on the Exa platform. The continued market adoption of Exadata and Exalogic is being paralleled by a growth in the rate of projects sold and implemented by partners. Sharing customer cases and best-practices presented by other partners constitutes the core of this event. If you want to present an experience of your company around Exadata, Exalogic or Manageability that can be a learning experience for other partners, we still have some slots in the agenda. (Please contact Javier Puerta if you want to present.) Attending the Community Forum you will also have the opportunity to get Oracle’s insight on new products and market trends. And, of course, interact with the Oracle executives responsible for the Exadata, Exalogic and Manageability business. The atmosphere of beautiful Vienna will be the scenario of the event. Detailed venue and hotel booking information will be sent to you in January. Don't miss out on attending this key event! Save the date now - 23 & 24 April 2013, and watch out for your formal invitation coming soon. Kind regards, Javier Puerta Core Technology Partner Programs, Oracle EMEA E-Mail: [email protected] Jürgen Kress SOA Partner Adoption Oracle EMEA E-Mail: [email protected] Copyright © 2012, Oracle and/or its affiliates. All rights reserved. Contact PBC | Legal Notices and Terms of Use | Privacy Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States

    Read the article

  • Save the Date - Oracle Partner Community Forum: Exadata, Exalogic and Manageability, Vienna, 23-24 April 2013

    - by Javier Puerta
    Hardware and Software Engineered to Work Together .Ritu { font-family: Arial, Helvetica, sans-serif; } .Ritu { font-family: Arial, Helvetica, sans-serif; } .Ritu { font-family: Arial, Helvetica, sans-serif; } body,td,th { font-family: Arial, Helvetica, sans-serif; font-size: x-small; } .color { color: #F00; } .c { color: #F00; } .c { color: #F00; } .c { color: #000; font-size: xx-small; } .c a { color: #F00; } .c { color: #F00; } .cl { color: #F00; } .b { color: #000; font-size: xx-small; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .i { font-style: italic; } .c { color: #F00; font-size: small; } .b { font-weight: bold; font-size: x-small; } .c { color: #F00; font-size: x-small; } .clr { color: #F00; } .c { color: #F00; } inside the Click Here The order you must follow to make the colored link appear in browsers. If not the default window link will appear 1. Select the word you want to use for the link 2. Select the desired color, Red, Black, etc 3. Select bold if necessary ___________________________________________________________________________________________________________________ Templates use two sizes of fonts and the sans-serif font tag for the email. All Fonts should be (Arial, Helvetica, sans-serif) tags Normal size reading body fonts should be set to the size of 2. Small font sizes should be set to 1 !!!!!!!DO NOT USE ANY OTHER SIZE FONT FOR THE EMAILS!!!!!!!! ___________________________________________________________________________________________________________________ -- Oracle PartnerNetwork | Account | Feedback SAVE THE DATE ORACLE PARTNER COMMUNITY FORUM: EXADATA, EXALOGIC AND MANAGEABILITY 23-24 APRIL 2013, VIENNA, AUSTRIA The 2013 event expands its scope to cover all the building blocks of the Cloud infrastructure: Exadata, Exalogic and Manageability! Dear partner I am delighted to announce the 2013 edition of the Exadata, Exalogic and Manageability Partner Community Forum for EMEA partners which will take place in Vienna, Austria, on April 23-24, 2013. After the experience of last year where we ran a joint Exadata and Manageability event, we received requests from many of you to add also Exalogic to the scope of the forum, and this way to cover the complete infrastructure architecture on the Exa platform. The continued market adoption of Exadata and Exalogic is being paralleled by a growth in the rate of projects sold and implemented by partners. Sharing customer cases and best-practices presented by other partners constitutes the core of this event. If you want to present an experience of your company around Exadata, Exalogic or Manageability that can be a learning experience for other partners, we still have some slots in the agenda. (Please contact Javier Puerta if you want to present.) Attending the Community Forum you will also have the opportunity to get Oracle’s insight on new products and market trends. And, of course, interact with the Oracle executives responsible for the Exadata, Exalogic and Manageability business. The atmosphere of beautiful Vienna will be the scenario of the event. Detailed venue and hotel booking information will be sent to you in January. Don't miss out on attending this key event! Save the date now - 23 & 24 April 2013, and watch out for your formal invitation coming soon. Kind regards, Javier Puerta Core Technology Partner Programs, Oracle EMEA E-Mail: [email protected] Jürgen Kress SOA Partner Adoption Oracle EMEA E-Mail: [email protected] Copyright © 2012, Oracle and/or its affiliates. All rights reserved. Contact PBC | Legal Notices and Terms of Use | Privacy Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States

    Read the article

  • Free RAM disappears - Memory leak?

    - by Izzy
    On a fresh started system, free reports about 1.5G used RAM (8G RAM alltogether, Ubuntu 12.04 with lightdm and plasma desktop, one konsole window started). Having the apps running I use, it still consumes not more than 2G. However, having the system running for a couple of days, more and more of my free RAM disappears -- without showing up in the list of used apps: while smem --pie=name reports less than 20% used (and 80% being available), everything else says differently. free -m for example reports on about day 7: total used free shared buffers cached Mem: 7459 7013 446 0 178 997 -/+ buffers/cache: 5836 1623 Swap: 9536 296 9240 (so you can see, it's not the buffers or the cache). Today this finally ended with the system crashing completely: the windows manager being gone, apps "hanging in the air" (frameless) -- and a popup notifying me about "too many open files". Syslog reports: kernel: [856738.020829] VFS: file-max limit 752838 reached So I closed those applications I was able to close, and killed X using Ctrl-Alt-backspace. X tried to come up again after that with failsafeX, but was unable to do so as it could no longer detect its configuration. So I switched to a console using Ctrl-Alt-F2, captured all information I could think of (vmstat, free, smem, proc/meminfo, lsof, ps aux), and finally rebooted. X again came up with failsafeX; this time I told it to "recover from my backed-up configuration", then switched to a console and successfully used startx to bring up the graphical environment. I have no real clue to what is causing this issue -- though it must have to do either with X itself, or with some user processes running on X -- as after killing X, free -m output looked like this: total used free shared buffers cached Mem: 7459 2677 4781 0 62 419 -/+ buffers/cache: 2195 5263 Swap: 9536 59 9477 (~3.5GB being freed) -- to compare with the output after a fresh start: total used free shared buffers cached Mem: 7459 1483 5975 0 63 730 -/+ buffers/cache: 689 6769 Swap: 9536 0 9536 Two more helpful outputs are provided by memstat -u. Shortly before the crash: User Count Swap USS PSS RSS mail 1 0 200 207 616 whoopsie 1 764 740 817 2300 colord 1 3200 836 894 2156 root 62 70404 352996 382260 569920 izzy 80 177508 1465416 1519266 1851840 After having X killed: User Count Swap USS PSS RSS mail 1 0 184 188 356 izzy 1 1400 708 739 1080 whoopsie 1 848 668 826 1772 colord 1 3204 804 888 1728 root 62 54876 131708 149950 267860 And after a restart, back in X: User Count Swap USS PSS RSS mail 1 0 212 217 628 whoopsie 1 0 1536 1880 5096 colord 1 0 3740 4217 7936 root 54 0 148668 180911 345132 izzy 47 0 370928 437562 915056 Edit: Just added two graphs from my monitoring system. Interesting to see: everytime when there's a "jump" in memory consumption, CPU peaks as well. Just found this right now -- and it reminds me of another indicator pointing to X itself: Often when returning to my machine and unlocking the screen, I found something doing heavvy work on my CPU. Checking with top, it always turned out to be /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none. So after this long explanation, finally my questions: What could be the possible causes? How can I better identify involved processes/applications? What steps could be taken to avoid this behaviour -- short from rebooting the machine all X days? I was running 8.04 (Hardy) for about 5 years on my old machine, never having experienced the like (always more than 100 days uptime, before rebooting for e.g. kernel updates). This now is a complete new machine with a fresh install of 8.04. In case it matters, some specs: AMD A4-3400 APU with Radeon(tm) HD Graphics, using the open-source ati/radeon driver (so no fglrx installed), 8GB RAM, WDC WD1002FAEX-0 hdd (1TB), Asus F1A75-V Evo mainboard. Ubuntu 12.04 64-bit with KDE4/Plasma. Apps usually open more or less permanently include Evolution, Firefox, konsole (with Midnight Commander running inside, about 4 tabs), and LibreOffice -- plus occasionally Calibre, Gimp and Moneyplex (banking software I'm already using for almost 20 years now, in a version which did fine on Hardy).

    Read the article

  • First Impressions of a MacBook (from a PC guy)

    - by dgreen
    Disclaimer: I've been a PC guy my entire working career. I'd probably characterize myself as a power user. Never afraid to bust out the console line. But working with a Mac is totally foreign to me. So for those Mac guys who are curious, this is how your world appears from the outside to a computer literate person :)My Macbook Air has arrived! And it's a thing of beauty:First, the specs: 13" MacBook Air, 2.0GHz Core i7 processor. Upgraded to 8GB of RAM for an additional $100, SSD flash storage  = 256GB. The plan is ultimately to use this baby for some iOS development but also some decent lifting in Windows with Visual Studio. Done a lot of reading  and between VMWare Fusion, Parallels and Bootcamp...I'm going to go with VMWare Fusion for $49.99And now my impressions (please re-read disclaimer before proceeding!):I open the box and am trying to understand exactly how the magsafe connector works (and how to disconnect it).  Why does it have two socket outlet plugs? Who knows.  I feel like Hansel in Zoolander. The files are "in" the computer.Stuck in my external hard drive (usb). So how do I get to the files? To the Googles!Argh...it can't read my external NTFS drive. Fat32 can't support field over 4GB…problematic since some of my existing VMWare image files are much larger than 4GB. Didn't see this coming.Three year old loves iPhoto. Super easy to use. Don't even know what I'm doing but I've already (accidentally) discovered the image filtering options. Fun stuff.First thing I downloaded ever => Chrome. I need something to ground me, something familiar. My token, if you will (sorry, gratuitous Inception joke).Ok, I get it… Finder == windows explorer. But where is my hierarchical structure? I miss the tree :(On that note, yeah…how do I see what "path" my files reside in? I'm afraid to know the answer. You know what scares more though…this notion of a smart folder. Feel like the godfather - just get the job done, I don't care how you handle it, I don't want to know...just get it done. What the hell is AirDrop?Mail…just worked. Still in shock that they have a free client for yahoo mail (please no yahoo jokes).mail -> deleting a message takes 5 seconds. Have they heard of async?"Command" key instead of "Control" ok, then what the $%&^! is the control key for then"aliases" == shortcuts I thinkI don't see the file system. And I'm scared. All these things I'm downloading…these .dmg files (bad name) where are they going? Can't seem to delete when they're doneUgh...realized need to buy a mini-to-vga adaptor if I want to use my external monitor ($13 on ebay, $39 in apple store).Windows docking is trickiest for me…this notion of detached windows with a menu bar at the top. I don't like this paradigm, it's confusing. But maybe because I've been using Windows for too long.Evernote, Dropbox desktop clients seem almost identical…few quirks here and there I need to get used to.iTunes is still a bit gross. In a weird way it's actually worse on a Mac if thats possible. This is not the MacBook's fault…this is a software design issue. Overall: UI will take some getting used to. Can't decide if this represents the future and I'm stuck in the past…or this is the past and I've been spoiled by the future (which would be Windows…don't be hating I happen to be very productive in Win7)  So there you go - my 90 minute first impression of the MacBook universe.

    Read the article

  • You Probably Already Have a “Private Cloud”

    - by BuckWoody
    I’ve mentioned before that I’m not a fan of the word “Cloud”. It’s too marketing-oriented, gimmicky and non-specific. A better definition (in many cases) is “Distributed Computing”. That means that some or all of the computing functions are handled somewhere other than under your specific control. But there is a current use of the word “Cloud” that does not necessarily mean that the computing is done somewhere else. In fact, it’s a vector of Cloud Computing that can better be termed “Utility Computing”. This has to do with the provisioning of a computing resource. That means the setup, configuration, management, balancing and so on that is needed so that a user – which might actually be a developer – can do some computing work. To that person, the resource is just “there” and works like they expect, like the phone system or any other utility. The interesting thing is, you can do this yourself. In fact, you probably already have been, or are now. It’s got a cool new trendy term – “Private Cloud”, but the fact is, if you have your setup automated, the HA and DR handled, balancing and performance tuning done, and a process wrapped around it all, you can call yourself a “Cloud Provider”. A good example here is your E-Mail system. your users – pretty much your whole company – just logs into e-mail and expects it to work. To them, you are the “Cloud” provider. On your side, the more you automate and provision the system, the more you act like a Cloud Provider. Another example is a database server. In this case, the “end user” is usually the development team, or perhaps your SharePoint group and so on. The data professionals configure, monitor, tune and balance the system all the time. The more this is automated, the more you’re acting like a Cloud Provider. Lots of companies help you do this in your own data centers, from VMWare to IBM and many others. Microsoft's offering in this is based around System Center – they have a “cloud in a box” provisioning system that’s actually pretty slick. The most difficult part of operating a Private Cloud is probably the scale factor. In the case of Windows and SQL Azure, we handle this in multiple ways – and we're happy to share how we do it. It’s not magic, and the algorithms for balancing (like the one we started with called Paxos) are well known. The key is the knowledge, infrastructure and people. Sure, you can do this yourself, and in many cases such as top-secret or private systems, you probably should. But there are times where you should evaluate using Azure or other vendors, or even multiple vendors to spread your risk. All of this should be based on client need, not on what you know how to do already. So congrats on your new role as a “Cloud Provider”. If you have an E-mail system or a database platform, you can just put that right on your resume.

    Read the article

  • How can I create a facebook style message system in Rails 3?

    - by Angela
    I am trying to create a basic message system that allows users to send messages to each other and display it in a simple "Inbox" that shows both messages received and sent, as well as the status of read or unread. Ideally I could reuse existing code. But if not, can someone provide a framework to help me do it? I started to use a single Message record that has UserMessage - one for the sender, one for the receiver. That way I could have separate status. But I'm not sure I'm quite doing it right and would like some guidance. Thanks.

    Read the article

  • Help Me Help You Fix That

    - by BuckWoody
    If you've been redirected here because you posted on a forum, or asked a question in an e-mail, the person wanted you to know how to get help quickly from a group of folks who are willing to do so - but whose time is valuable. You need to put a little effort into the question first to get others to assist. This is how to do that. It will only take you a moment to read... 1. State the problem succinctly in the title When an e-mail thread starts, or a forum post is the "head" of the conversation, you'll attract more helpers by using a descriptive headline than a vague one. This: "Driver for Epson Line Printer Not Installing on Operating System XYZ" Not this: "Can't print - PLEASE HELP" 2. Explain the Error Completely Make sure you include all pertinent information in the request. More information is better, there's almost no way to add too much data to the discussion. What you were doing, what happened, what you saw, the error message, visuals, screen shots, whatever you can include. This: "I'm getting error '5203 - Driver not compatible with Operating System since about 25 years ago' in a message box on the screen when I tried to run the SETUP.COM file from my older computer. It was a 1995 Compaq Proliant and worked correctly there.." Not this: "I get an error message in a box. It won't install." 3. Explain what you have done to research the problem If the first thing you do is ask a question without doing any research, you're lazy, and no one wants to help you. Using one of the many fine search engines you can most always find the answer to your problem. Sometimes you can't. Do yourself a favor - open a notepad app, and paste the URL's as you look them up. If you get your answer, don't save the note. If you don't get an answer, send the list along with the problem. It will show that you've tried, and also keep people from sending you links that you've already checked. This: "I read the fine manual, and it doesn't mention Operating System XYZ for some reason. Also, I checked the following links, but the instructions there didn't fix the problem: " Not this: <NULL> 4. Say "Please" and "Thank You" Remember, you're asking for help. No one owes you their valuable time. Ask politely, don't pester, endure the people who are rude to you, and when your question is answered, respond back to the thread or e-mail with a thank you to close it out. It helps others that have your same problem know that this is the correct answer. This: "I could really use some help here - if you have any pointers or things to try, I'd appreciate it." Not this: "I really need this done right now - why are there no responses?" This: "Thanks for those responses - that last one did the trick. Turns out I needed a new printer anyway, didn't realize they were so inexpensive now." Not this: <NULL> There are a lot of motivated people that will help you. Help them do that.

    Read the article

  • how to bind super+s to indicator applete complete? - gnome classic

    - by rrosa
    i use gnome classic, i'm not a mouse fan. when i get an email while i'm writing code, i i would super+s to get to the indicator-applet-complete and read it. also to write emails, or check unread instant messages. upgrading from 12.04 to 14.04 made super+s bind to applications menu rather than the indicator applet complete. i removed the binding from the applications using dconf-editor, navigating to: org-gnome-desktop-wm-keybindings and disabling (['disabled']) the panel-main-menu key. now, how do i bind super+s to the indicator applet complete? it seems to be some how binded, since if if press super+s and then move the cursor over the applet it'll open the drop down menus (and it won't if i hover without pressing super+s) but i don't want to have to use the mouse...

    Read the article

  • Android multiple email attachment using Intent question

    - by yyyy1234
    Hi, I've been working on Android program to send email with attachment (image file , audio file , etc) using Intent with (ACTION_SEND) . THe program is working when email has a single attachment. I used Intent.putExtra( android.content.Intent.EXTRA_STREAM, uri) to attach the designated image file to the mail and it is wokring fine , the mail can be delivered through Gmail . However, when I tried to have multiple images attached to the same mail by calling Intent.putExtra( android.content.Intent.EXTRA_STREAM, uri) multiple times, it failed to work. None of the attachment show up in the email . I searched the SDK documentation and Android programming user group about email attachment but cannot find any related info. However, I've discovered that there's another intent constnat ACTION_SEND_MULTIPLE (available since API level 4 ) which might meet my requirement. Based on SDK documentation, it simply states that it deliver multiple data to someone else , it works like ACTION_SEND , excpet the data is multiple. But I still could not figure out the correct usage for this command. I tried to delcare intent with ACTION_SEND_MULTIPLE , then call putExtra(EXTRA_STREAM, uri) multiple times to attach multiple images , but I got the same errnoenous result just like before, none of the attachment show up in the email. Has anyone tried with ACTION_SEND_MULTIPLE and got it working with multiple email attachment ? Thanks very much for your help. Regards, yyyy1234

    Read the article

  • PHP PayPal IPN - Getting drop down menu

    - by kimion09
    I'm using Paypal's buy it now buttons along with an IPN handler written in PHP to send me an e-mail whenever a purchase is made. The e-mail is properly being sent and is passing much of the data, but it's not capturing the drop down list for selecting a clothing item's size. Here's my button code fields: <input type="hidden" name="item_name" value="Test Shirt"> <input type="hidden" name="item_number" value="001"> <input type="hidden" name="on0" value="sizes"> Select a size: <select name="os0"> <option value="Small">Small </option> <option value="Medium">Medium </option> <option value="Large">Large </option> <option value="Extra Large">Extra Large </option> </select> My PHP IPN script that captures the data into variables looks like this: $item_name = $_POST['item_name']; $item_number = $_POST['item_number']; $size = $_POST['on0']; $sizeChoice = $_post['os0']; The e-mail properly displays the item name and item number, but nothing for the $size and $sizeChoice variables. It's late so I'm sure I'm looking over something very obvious but am still wondering if I'm just calling it wrong or if I'm forgetting some hidden fields? Thanks :)

    Read the article

  • configure batch to sent minute info instead of entire stdout

    - by Daniel
    Hi all, I am working on a RedHat server along with several other users. We use the batch utility to set a job queue. Some of the programs that I use write stuff to stdout during the run, with info on who much data has been processed to far and estimated time until completion etc. batch -q z at> myScript -i somefile -o someotherfile By default, the batch util send an email to me (since I configured it using .forward) with the entire output from stdout. Since the scripts writes something to stdout a few times each second, the amount of log-stuff I get from a two-day script can be ˜20 Mbs. Clearly not what I want. I can of course pipe stdout to a file like so batch -q z at> myScript -i somefile -o someotherfile > myscript.stdout.log but then I get a blank e-mail from the util. So to my question: Is it possible to configure batch so that it sends time the job started and ended, or run time or some oth valuable information to me, instead of a 20 Mb mail or a blank mail? Note that the scripts that I use are binaries and I cannot customize the code to output less info in the first place (which would be the optimal solution I guess). Thanks /Daniel

    Read the article

  • Extremely slow MFMailComposeViewControllerDelegate

    - by Jeff B
    I have a bit of a strange problem. I am trying to send in-app email. I am also using Cocos2d. It works, so far as I get the mail window and I can send mail, but it is extremely slow. It seems to only accept touches every second or so. I checked the cpu usage, and it is quite low. I paused my director, so nothing else should be happening. Any ideas? I am pulling my hair out. I looked at some examples and did the following: Made my scene the mail delegate: @interface MyLayer : CCLayer <MFMailComposeViewControllerDelegate> { ... } And implemented the following function in the scenes: -(void) showEmailWindow: (id) sender { [[CCDirector sharedDirector] pause]; MFMailComposeViewController *picker = [[MFMailComposeViewController alloc] init]; picker.mailComposeDelegate = self; [picker setSubject: @"My subject here"]; NSString *emailBody = @"<h1>Here is my email!</h1>"; [picker setMessageBody:emailBody isHTML:YES]; [myMail presentModalViewController:picker animated:NO]; [picker release]; } I also implemented the mailComposeController, to handle the callback.

    Read the article

  • How do you capture a group with regex?

    - by Sylvain
    Hi, I'm trying to extract a string from another using regex. I'm using the POSIX regex functions (regcomp, regexec ...), and I fail at capturing a group ... For instance, let the pattern be something as simple as "MAIL FROM:<(.*)>" (with REG_EXTENDED cflags) I want to capture everything between '<' and '' My problem is that regmatch_t gives me the boundaries of the whole pattern (MAIL FROM:<...) instead of just what's between the parenthesis ... What am I missing ? Thanks in advance, edit: some code #define SENDER_REGEX "MAIL FROM:<(.*)>" int main(int ac, char **av) { regex_t regex; int status; regmatch_t pmatch[1]; if (regcomp(&regex, SENDER_REGEX, REG_ICASE|REG_EXTENDED) != 0) printf("regcomp error\n"); status = regexec(&regex, av[1], 1, pmatch, 0); regfree(&regex); if (!status) printf( "matched from %d (%c) to %d (%c)\n" , pmatch[0].rm_so , av[1][pmatch[0].rm_so] , pmatch[0].rm_eo , av[1][pmatch[0].rm_eo] ); return (0); } outputs: $./a.out "012345MAIL FROM:<abcd>$" matched from 6 (M) to 22 ($) solution: as RarrRarrRarr said, the indices are indeed in pmatch[1].rm_so and pmatch[1].rm_eo hence regmatch_t pmatch[1]; becomes regmatch_t pmatch[2]; and regexec(&regex, av[1], 1, pmatch, 0); becomes regexec(&regex, av[1], 2, pmatch, 0); Thanks :)

    Read the article

  • How to prepopulate an Outlook MailItem and avoiding a com Exception from the object model guard

    - by torrente
    Hi, I work for a company that develops a CRM tool and offers integration with MS Office(2003 & 2007) from windows XP to 7. (I'm working using Win7) My task is to call an Outlook instance (using C#) from this CRM tool when the user wants to send an email and prepopulate with data of the CRM tool (email, recipient, etc..) All of this already works just fine. The problem I'm having is that Outlook's "object model guard" is throwing com Exception (Operation aborted (Exception from HRESULT: 0x80004004 (E_ABORT))) the moment I try to read a protected value from the mailItem (such as mail.bodyHTML). Example Snippet: using MSOutlook = Microsoft.Office.Interop.Outlook; //untrusted Instance _outlook = new MSOutlook.Application(); MSOutlook.MailItem mail = (MSOutlook.MailItem)_outlook.CreateItem(MSOutlook.OlItemType.olMailItem); //this where the Exception occurs string outlookStdHTMLBody = mail.HTMLBody; I've done quite a bit of reading and know that my Outlook Instance (derived by using new Application) is considered untrusted and therefore the "omg" kicks in. I do have a workaround for development: I'm running VS2010 as Administrator and if I run Outlook as Administrator as well - all is good. I suppose this is due to them having the same integrity levels(high) and the UAC(?) is not complaining. But that just ain't the way to go for deployment. Now the question is: Is there a way to obtain a trusted instance of Outlook so that I can avoid this exception? I've already read that when developing an Office Add-In using VSTO one can obtain a trusted Instance from the OnComplete event and/or using "ThisAddin" But I "merely" want to start an outlook instance and preopulate it, and do not want to develop an Add-In since this is not the requirement. And to make it clear - I have no problem with pop ups informing the user that outlook is being accessed - I just want to get rid of the exception! So how can I get around this problem using code? Any help is highly appreciated! Thomas

    Read the article

  • How to make NAnt send an email using a real account

    - by Turro
    First of all, I have already seen this post: nant mail issues but the only answer is not satisfactory (i.e.: doesn't work for me). I am using NAnt to get latest version of source, upgrade version of the libraries and application, build the application, build the setups... all the usual things, I bet. I would like NAnt to send an email to some people confirming the conclusion of the build process; I've already checked the official (pretty ugly, IMHO) documentation for the task, but the example, once copied and customized, doesn't work. This are the NAnt target and task I'm using: <target name="sendMail" > <mail from="[email protected]" tolist="[email protected];[email protected]" subject="Subject of email" mailhost="smtp.gmail.com" message="Your new release is ready!"> </mail> </target> The error message I get is: 530 5.7.0 Must issue a STARTTLS command first. It looks like that the task was designed for use by an account whose provider doesn't need authentication; but what can I do if I must use an external smtp server which requires authentication (telling my boss I need an smtp server in house is not an option)? Can anybody help/teach me? Thanks in advance...

    Read the article

  • How to get the sending email address from outlook 2007

    - by Naresh
    I am working on outlook add-in project using Visual studio 2008 for MS Outlook 2007 in C#. Here I am explaining my problem... I got multiple accounts (3 Accounts) with my outlook 2007. I need to get accounts form Account box in New Mail Message window. When we click New Mail Message, a new window will appear from which we can send a new mail. Here (On this window) we can see Account Dropdown (Left side) under the Send Button. If we have multiple accounts with outlook, we can see all the accounts in Account Drop Down if we click on Account Box. If we click on the particular email, a right mark will appear to that Email Account and a message can bee seen on the top of the Send button is "This message will be sent via [email protected]". So, I want to get these email accounts into a string and that particular email account (which has right mark) into another string. I got these 3 email accounts into a string. But, I am not getting the particular email account(which has the right mark when we send a new email). I am using this code.... using Outlook = Microsoft.Office.Interop.Outlook; using Office = Microsoft.Office.Core; using Microsoft.Office.Interop.Outlook; Outlook._Application myOutlookApp = new Outlook.Application(); Outlook.Accounts myAccounts = myOutlookApp.Session.Accounts; foreach (Outlook.Account account in myAccounts) { string emailAddress = account.SmtpAddress; } I am able to get all the accounts from the above code..But, I just want to get the email address which we will use for sending an email at that particular moment..

    Read the article

  • Run time error: what's wrong?

    - by javacode
    I am getting run time error import javax.mail.*; import javax.mail.internet.*; import java.util.*; public class SendMail { public static void main(String [] args)throws MessagingException { SendMail sm=new SendMail(); sm.postMail(new String[]{"[email protected]"},"hi","hello","[email protected]"); } public void postMail( String recipients[ ], String subject, String message , String from) throws MessagingException { boolean debug = false; //Set the host smtp address Properties props = new Properties(); props.put("mail.smtp.host", "webmail.emailmyname.com"); // create some properties and get the default Session Session session = Session.getDefaultInstance(props, null); session.setDebug(debug); // create a message Message msg = new MimeMessage(session); // set the from and to address InternetAddress addressFrom = new InternetAddress(from); msg.setFrom(addressFrom); InternetAddress[] addressTo = new InternetAddress[recipients.length]; for (int i = 0; i < recipients.length; i++) { addressTo[i] = new InternetAddress(recipients[i]); } msg.setRecipients(Message.RecipientType.TO, addressTo); // Optional : You can also set your custom headers in the Email if you Want msg.addHeader("MyHeaderName", "myHeaderValue"); // Setting the Subject and Content Type msg.setSubject(subject); msg.setContent(message, "text/plain"); Transport.send(msg); } } Error Exception in thread "main" java.lang.NoClassDefFoundError: SendMail Caused by: java.lang.ClassNotFoundException: SendMail at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) Could not find the main class: SendMail. Program will exit.

    Read the article

  • Send Email from worker role (Azure) with attachment in c#

    - by simplyvaibh
    I am trying to send an email(in c#) from worker role(Azure) with an attachment(from blob storage). I am able to send an email but attachment(word document) is blank. The following function is called from worker role. public void sendMail(string blobName) { InitStorage();//Initialize the storage var storageAccount = CloudStorageAccount.FromConfigurationSetting("DataConnectionString"); container = blobStorage.GetContainerReference("Container Name"); CloudBlockBlob blob = container.GetBlockBlobReference(blobName); if (File.Exists("demo.doc")) File.Delete("demo.doc"); FileStream fs = new FileStream("demo.doc", FileMode.OpenOrCreate); blob.DownloadToStream(fs); Attachment attach = new Attachment(fs,"Report.doc"); System.Net.Mail.MailMessage Email = new System.Net.Mail.MailMessage("[email protected]", "[email protected]"); Email.Subject = "Text fax send via email"; Email.Subject = "Subject Of email"; Email.Attachments.Add(attach); Email.Body = "Body of email"; System.Net.Mail.SmtpClient client = new SmtpClient("smtp.live.com", 25); client.DeliveryMethod = SmtpDeliveryMethod.Network; client.EnableSsl = true; client.Credentials = new NetworkCredential("[email protected]", Password); client.Send(Email); fs.Flush(); fs.Close(); Email.Dispose(); } Please tell me where I am doing wrong?

    Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >