Search Results

Search found 3061 results on 123 pages for 'videos'.

Page 114/123 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

  • Big Data – What is Big Data – 3 Vs of Big Data – Volume, Velocity and Variety – Day 2 of 21

    - by Pinal Dave
    Data is forever. Think about it – it is indeed true. Are you using any application as it is which was built 10 years ago? Are you using any piece of hardware which was built 10 years ago? The answer is most certainly No. However, if I ask you – are you using any data which were captured 50 years ago, the answer is most certainly Yes. For example, look at the history of our nation. I am from India and we have documented history which goes back as over 1000s of year. Well, just look at our birthday data – atleast we are using it till today. Data never gets old and it is going to stay there forever.  Application which interprets and analysis data got changed but the data remained in its purest format in most cases. As organizations have grown the data associated with them also grew exponentially and today there are lots of complexity to their data. Most of the big organizations have data in multiple applications and in different formats. The data is also spread out so much that it is hard to categorize with a single algorithm or logic. The mobile revolution which we are experimenting right now has completely changed how we capture the data and build intelligent systems.  Big organizations are indeed facing challenges to keep all the data on a platform which give them a  single consistent view of their data. This unique challenge to make sense of all the data coming in from different sources and deriving the useful actionable information out of is the revolution Big Data world is facing. Defining Big Data The 3Vs that define Big Data are Variety, Velocity and Volume. Volume We currently see the exponential growth in the data storage as the data is now more than text data. We can find data in the format of videos, musics and large images on our social media channels. It is very common to have Terabytes and Petabytes of the storage system for enterprises. As the database grows the applications and architecture built to support the data needs to be reevaluated quite often. Sometimes the same data is re-evaluated with multiple angles and even though the original data is the same the new found intelligence creates explosion of the data. The big volume indeed represents Big Data. Velocity The data growth and social media explosion have changed how we look at the data. There was a time when we used to believe that data of yesterday is recent. The matter of the fact newspapers is still following that logic. However, news channels and radios have changed how fast we receive the news. Today, people reply on social media to update them with the latest happening. On social media sometimes a few seconds old messages (a tweet, status updates etc.) is not something interests users. They often discard old messages and pay attention to recent updates. The data movement is now almost real time and the update window has reduced to fractions of the seconds. This high velocity data represent Big Data. Variety Data can be stored in multiple format. For example database, excel, csv, access or for the matter of the fact, it can be stored in a simple text file. Sometimes the data is not even in the traditional format as we assume, it may be in the form of video, SMS, pdf or something we might have not thought about it. It is the need of the organization to arrange it and make it meaningful. It will be easy to do so if we have data in the same format, however it is not the case most of the time. The real world have data in many different formats and that is the challenge we need to overcome with the Big Data. This variety of the data represent  represent Big Data. Big Data in Simple Words Big Data is not just about lots of data, it is actually a concept providing an opportunity to find new insight into your existing data as well guidelines to capture and analysis your future data. It makes any business more agile and robust so it can adapt and overcome business challenges. Tomorrow In tomorrow’s blog post we will try to answer discuss Evolution of Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • Oracle WebCenter: uma nova vis&atilde;o para os Portais

    - by Denisd
    O conceito de “Portal” existe há muito tempo, mas está sempre mudando. Afinal de contas, o que é um portal? Nos primórdios da internet, o termo “portal” era utilizado para sites que guardavam muitas páginas (ou seja, muita informação). “Portal de notícias” era um termo comum, embora estes “portais” não passassem de um conjunto de páginas estáticas, que basicamente serviam conteúdo aos usuários. Com a evolução da tecnologia, os web sites passaram a ficar mais dinâmicos, permitindo uma interação maior do usuário. Sites de comunidades sociais são o melhor exemplo disso. Neste momento, o “portal” passou a ser não apenas um grupo de páginas, mas um conjunto de serviços e recursos dinâmicos, como a possibilidade de publicar fotos e vídeos, e compartilhar este conteúdo com amigos on-line. Aqui temos o que podemos chamar de “Portais Sociais”. Ao mesmo tempo, dentro das empresas, outra mudança estava acontecendo: a criação de padrões de comunicação entre aplicativos, sendo o mais famoso destes padrões a tecnologia de Web Services. Com estes padrões, as aplicações podem trocar informações e facilitar a experiência dos usuários. Desta forma, é possível desenvolver mini-aplicativos (chamados “portlets”), que publicam informações dos sistemas corporativos nas páginas dos portais internos. Estes portlets permitem interações com os sistemas, para permitir que os usuários tenham acesso rápido e fácil às informações. Podemos chamar estes portais de “Portais Transacionais”. Aqui temos 2 pontos que eu gostaria de chamar a atenção: 1 – O desenvolvimento de portlets é necessário porque eu não consigo publicar uma aplicação inteira no portal, normalmente por uma questão de padrões de desenvolvimento. Explicando de uma forma simples, a aplicação não foi feita para rodar dentro de um portal. Portanto, é necessário desenvolvimento adicional para criar mini-aplicativos que replicam (ou melhor, duplicam) a lógica do aplicativo principal, dentro do portal. 2 – Os aplicativos corporativos normalmente não incluem os recursos colaborativos de um portal (por exemplo, fóruns de discussão, lista de contatos com sensores de presença on-line, wikis, tags, etc), simplesmente porque este tipo de recurso normalmente não está disponível de forma “empacotada” para ser utilizada em um aplicativo. Desta forma, se eu quiser que a minha aplicação tenha um fórum de discussão para que os meus clientes conversem com a minha equipe técnica, eu tenho que desenvolver todo o motor do fórum de discussão dentro do meu aplicativo, o que se torna inviável, devido ao custo, tempo e ao fato de que este tipo de recurso normalmente não está no escopo da minha aplicação. O que acaba acontecendo é que os usuários fazem a parte “transacional” dentro do aplicativo, mas acabam utilizando outras interfaces para atender suas demandas de colaboração (neste caso, utilizariam um fórum fora da aplicação para discutir problemas referentes ao aplicativo). O Oracle WebCenter 11g vem para resolver estes dois pontos citados acima. O WebCenter não é simplesmente um novo portal, com alguns recursos interessantes; ele é uma nova forma de se pensar em Portais Corporativos (portais que reúnem os cenários citados acima: conteúdo, social e transacional). O WebCenter 11g é extenso demais para ser descrito em um único post, e nem é a minha intenção entrar no detalhe deste produto agora. Mas podemos definir o WebCenter 11g como sendo 3 “coisas”: - Um framework de desenvolvimento, aonde os recursos que as minhas aplicações irão utilizar (por exemplo, validação de crédito, consulta à estoque, registro de um pedido, etc), são desenvolvidos de forma a serem reutilizados por qualquer outra aplicação ou portlet que seja executado neste framework. Este tipo de componente reutilizável é chamado de “Task Flow”. - Um conjunto de serviços voltados à colaboração, como fóruns, wikis, blogs, tags, links, people connections, busca, bibliotecas de documentos, etc. Todos estes recursos colaborativos também estão disponíveis como Task Flows, desta forma, qualquer aplicação que eu desenvolva pode se beneficiar destes recursos. - Um “Portal”, do ponto de vista tradicional, aonde os usuários podem criar páginas, inserir e compartilhar conteúdo com outros usuários. Este Portal consegue utilizar os recursos desenvolvidos no Framework, garantindo o reuso. A imagem abaixo traz uma visão deste Portal. Clique para ver em tamanho maior. A grande inovação que o WebCenter traz é que a divisão entre “portal” e “aplicação” desaparece: qualquer aplicação agora pode ser desenvolvida com recursos de portal. O meu sistema de CRM, por exemplo, pode ter um fórum de discussão para os clientes. O meu sistema de suporte pode utilizar Wikis para montar FAQs de forma rápida. O sistema financeiro pode incluir uma biblioteca de documentos para que o usuário possa consultar os manuais de procedimento. Portanto, não importa se eu estou desenvolvendo uma “aplicação” ou um “portal”; o que importa é que os meus usuários agora terão em uma única interface as funcionalidades dos aplicativos e os recursos de colaboração. Este conceito, dentro da Oracle, é chamado de “Composite Applications”, e é a base para a próxima geração dos aplicativos Oracle. Nos próximos posts iremos falar (é claro) sobre como o WebCenter e o UCM se relacionam, e que tipo de recursos podem ser aproveitados nas aplicações/portais. Até breve!

    Read the article

  • Create a Slide Show in Windows 7 Media Center

    - by DigitalGeekery
    Are you looking for a nice way to create and display a slide show from your photo collection? Today we’ll show you how to create a slide show, how to add music to it, and watch it from the comfort of your couch in Windows 7 Media Center. Create Slide Show Launch Windows 7 Media Center and click on the Picture Library tile found under Pictures and Videos.   In the Pictures Library, scroll across to slide shows and click on Create Slide show.   Enter a name for the slide show and click Next.   If you are using a Windows Media Center remote, click on the OK button to bring up the onscreen keyboard. Use the directional buttons to navigate across the keyboard and press OK to select each letter. Click Done when finished. Select Picture Library and click Next. Select the pictures to include in your slide show. If using a remote, navigate through the images and press OK to select. If you are using a mouse, simply click on the selections. When you are finished, click Next.    Now, we can review and edit the slide show. Click the up or down pointing arrows to move pictures up and down in the order.  (more intuitive titles would be helpful in this case as opposed to the randomly generated titles in the example below) If you are finished, click Create. You can also choose to go back and add music to your slide show. (or even more pictures) We’ll take a look at adding some music in our example. Click on the Add More button.   Add Music to Your Slide Show Here we’ll select Music Library to add a song. Click Next.   You’ll now be able to browse your Music Library to select songs for your slide show. Select your songs and click Next.   When you are finished adding Music and Pictures click Create.   Once your slide show is saved, you can play it any time by going to clicking on slide shows in the Picture Library, then selecting the slide show title. Select play slide show when you’re ready to enjoy your new production.   If you ever want to edit or delete the slide show, select it in the Picture Library, and scroll to Actions. You’ll see those option under additional commands. You have the option to Edit Slide Show, Burn a CD/DVD, or Delete. Editing Slide Show Settings Within Media Center, go to Tasks… Click on Pictures…   Then choose Slide Shows. From the Slide Show settings you have the option to Show pictures in random order, Show picture information, Show song information, and Use Pan and zoom effect. You can also adjust the length of time to display each picture, and change the background color. Be sure to click Save to apply and changes before exiting. If you choose to show picture information, the picture title, date, and star rating will be displayed in the top right.   If your slide show is accompanied by music and you choose to show song information, you will get a translucent overlay for a few seconds at the beginning of each song to indicate the song, album, and artist. One of the really cool things about creating a slide show in Windows 7 Media Center is you can complete the entire process using just a Media Center remote. Can’t get enough slide shows? Check out how to turn your desktop into a picture slide show in Windows 7. Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Add Color Coding to Windows 7 Media Center Program GuideIntegrate Boxee with Media Center in Windows 7Schedule Updates for Windows Media CenterTurn Your Desktop into a Picture Slideshow in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle ! Find That Elusive Icon with FindIcons

    Read the article

  • doubleTwist is an iTunes Alternative that Supports Several Devices

    - by Mysticgeek
    There are a lot of iTunes users out there, but unfortunately you can’t use it with all of your portable devices. Today we take a look at doubleTwist, which allows you to sync your media with a multitude of portable devices and easily share it as well. Note: You can run doubleTwist on Windows or Mac, and here we take a look at the Windows version. Install & Setup doubleTwist Download and install doubleTwist using the defaults in the wizard… Installation takes several moments and you’ll see the progress while it finishes up. After installation is complete, sign up for an account if you don’t already have one. If you do have an account you can login right away. Enter in your username, email address, and password then click Sign Up.   You’ll get an confirmation email and need to activate the account before you can sign in. Once you’re all signed up, launch doubleTwist and you’ll be ready to start using it. doubleTwist Music The default music store is Amazon MP3 store which might appeal to those of you who are tired of the iTunes music store. A lot of times the music is cheaper and available at higher bit rates. You can start searching for music in the Amazon Music Store and previewing songs. To purchase anything though you will need to sign into your Amazon account.   Under Playlists it allows you to import your playlists from iTunes and Windows Media Player, which is a handy feature if you don’t want to set them up again. Of course you can play your songs through the music player on your desktop. Devices One of the coolest things about doubleTwist is that it supports a lot of different portable media devices including iPod, BlackBerry, Windows Mobile, Android, PSP, Smartphones, and much more. Unfortunately for Zune users…there isn’t any support for the Zune of Zune HD yet. Here we have a Creative Zen attached and can sync songs, pictures, and podcasts. An HTC-S620 Smartphone running Windows Mobile… Even a simple USB drive will be recognized and you can transfer your media to it as well.   Podcasts Finding your favorite audio and video podcasts is easy with the search feature. You can easily manage and subscribe to podcasts in the subscriptions section.   You can watch the video podcasts directly in doubleTwist. Sharing Media Also you can share digital media with your friends or add it to Flickr and YouTube. You can send any pictures, videos, or music in your library to other people by dragging it over. You can email users individually… Or access contacts from your Gmail and Yahoo accounts. There is a limit to how much you can send of video podcasts… only the first 10 minutes. The person you send it to will get a link in their email that points to your My Feed page on the doubleTwist site.   There they can access the media you sent…in this example it’s a video podcast but you can share any media. Other Features Under My Profile you can change your avatar and personal information.   In Preferences you can choose where media is stored, its startup actions, podcast subscriptions, and manage device syncing. Conclusion It’s still in beta stage so expect some bugs, but overall doubleTwist is a solid media player that is easy to use with a clean interface. It’s simple and doesn’t try to do too much so is fairly easy on system resources. The main annoyance is it tries to catalog all of your media out of the box. Which may be alright for some users with smaller media collections, but very irritating to advanced users with large collections. Also there is currently no support for the Zune, but according to their forums, it’s on the way. At the time of this writing it’s in public beta and can be downloaded for XP, Vista, Windows 7 (32 & 64 bit), and Mac OSX. If you’re looking for an iTunes alternative that works with several different portable devices, you might want to give DoubleTwist a try. Download DoubleTwist Public Beta See If Your Media Device is Supported by doubleTwist Similar Articles Productive Geek Tips MusicBee is a Fast and Powerful Music ManagerAvoid the Apple QuickTime Bloat with QT LiteBeginner Geek: Set Default Programs in Windows 7 and VistaBeginner Geeks: OpenOffice is a Free Cross Platform Alternative to MS OfficeManage Devices the Easy Way with Device Stage in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

    Read the article

  • SQLAuthority News – Storing Data and Files in Cloud – Dropbox – Personal Technology Tip

    - by pinaldave
    I thought long and hard about doing a Personal Technology Tips series for this blog.  I have so many tips I’d like to share.  I am on my computer almost all day, every day, so I have a treasure trove of interesting tidbits I like to share if given the chance.  The only thing holding me back – which tip to share first?  The first tip obviously has the weight of seeming like the most important.  But this would mean choosing amongst my favorite tricks and shortcuts.  This is a hard task. Source: Dropbox.com My Dropbox I have finally decided, though, and have determined that the first Personal Technology Tip may not be the most secret or even trickier to master – in fact, it is probably the easiest.  My today’s Personal Technology Tip is Dropbox. I hope that all of you are nodding along in recognition right now.  If you do not use Dropbox, or have not even heard of it before, get on the internet and find their site.  You won’t be disappointed.  A quick recap for those in the dark: Dropbox is an online storage site with a lot of additional syncing and cloud-computing capabilities.  Now that we’ve covered the basics, let’s explore some of my favorite options in Dropbox. Collaborate with All The first thing I love about Dropbox is the ability it gives you to collaborate with others.  You can share files easily with other Dropbox users, and they can alter them, share them with you, all while keeping track of different versions in on easy place.  I’d like to see anyone try to accomplish that key idea – “easily” – using e-mail versions and multiple computers.  It’s even difficult to accomplish using a shared network. Afraid that this kind of ease looks too good to be true?  Afraid that maybe there isn’t enough storage space, or the user interface is confusing?  Think again.  There is plenty of space – you can get 2 GB with just a free account, and upgrades are inexpensive and go up to 100 GB of storage.  And the user interface is so easy that anyone can learn to use it. What I use Dropbox for I love Dropbox because I give a lot of presentations and often they are far from home.  I can keep my presentations on Dropbox and have easy access to them anywhere, without needing to have my whole computer with me.  This is just one small way that you can use Dropbox. You can sync your entire hard drive, or hard drives if you have multiple computers (home, work, office, shared), and you can set Dropbox to automatically sync files on a certain timeline, or whenever Dropbox notices that they’ve been changed. Why I love Dropbox Dropbox has plenty of storage, but 2 GB still has a hard time competing with the average desktop’s storage space.  So what if you want to sync most of your files, but only the ones you use the most and share between work and home, and not all your files (especially large files like pictures and videos)?  You can use selective sync to choose which files to sync. Above all, my favorite feature is LanSync.  Dropbox will search your Local Area Network (LAN) for new files and sync them to Dropbox, as well as downloading the new version to all the shared files across the network.  That means that if move around on different computers at work or at home, you will have the same version of the file every time.  Or, other users on the LAN will have access to the new version, which makes collaboration extremely easy. Ref: rzfeeser.com Dropbox has so many other features that I feel like I could create a Personal Technology Tips series devoted entirely to Dropbox.  I’m going to create a bullet list here to make things shorter, but I strongly encourage you to look further into these into options if it sounds like something you would use. Theft Recover Home Security File Hosting and Sharing Portable Dropbox Sync your iCal calendar Password Storage What is your favorite tool and why? I could go on and on, but I will end here.  In summary – I strongly encourage everyone to investigate Dropbox to see if it’s something they would find useful.  If you use Dropbox and know of a great feature I failed to mention, please share it with me, I’d love to hear how everyone uses this program. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Personal Technology

    Read the article

  • Verizon Wireless Supports its Mission-Critical Employee Portal with MySQL

    - by Bertrand Matthelié
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Verizon Wireless, the #1 mobile carrier in the United States, operates the nation’s largest 3G and 4G LTE network, with the most subscribers (109 millions) and the highest revenue ($70.2 Billion in 2011). Verizon Wireless built the first wide-area wireless broadband network and delivered the first wireless consumer 3G multimedia service in the US, and offers global voice and data services in more than 200 destinations around the world. To support 4.2 million daily wireless transactions and 493,000 calls and emails transactions produced by 94.2 million retail customers, Verizon Wireless employs over 78,000 employees with area headquarters across the United States. The Business Challenge Seeing the stupendous rise in social media, video streaming, live broadcasting…etc which redefined the scope of technology, Verizon Wireless, as a technology savvy company, wanted to provide a platform to its employees where they could network socially, view and host microsites, stream live videos, blog and provide the latest news. The IT team at Verizon Wireless had abundant experience with various technology platforms to support the huge number of applications in the company. However, open-source products weren’t yet widely used in the organization and the team had the ambition to adopt such technologies and see if the architecture could meet Verizon Wireless’ rigid requirements. After evaluating a few solutions, the IT team decided to use the LAMP stack for Vzweb, its mission-critical, 24x7 employee portal, with Drupal as the front end and MySQL on Linux as the backend, and for a few other internal websites also on MySQL. The MySQL Solution Verizon Wireless started to support its employee portal, Vzweb, its online streaming website, Vztube, and internal wiki pages, Vzwiki, with MySQL 5.1 in 2010. Vzweb is the main internal communication channel for Verizon Wireless, while Vztube hosts important company-wide webcasts regularly for executive-level announcements, so both channels have to be live and accessible all the time for its 78,000 employees across the United States. However during the initial deployment of the MySQL based Intranet, the application experienced performance issues. High connection spikes occurred causing slow user response time, and the IT team applied workarounds to continue the service. A number of key performance indexes (KPI) for the infrastructure were identified and the operational framework redesigned to support a more robust website and conform to the 99.985% uptime SLA (Service-Level Agreement). The MySQL DBA team made a series of upgrades in MySQL: Step 1: Moved from MyISAM to InnoDB storage engine in 2010 Step 2: Upgraded to the latest MySQL 5.1.54 release in 2010 Step 3: Upgraded from MySQL 5.1 to the latest GA release MySQL 5.5 in 2011, and leveraging MySQL Thread Pool as part of MySQL Enterprise Edition to scale better After making those changes, the team saw a much better response time during high concurrency use cases, and achieved an amazing performance improvement of 1400%! In January 2011, Verizon CEO, Ivan Seidenberg, announced the iPhone launch during the opening keynote at Consumer Electronic Show (CES) in Las Vegas, and that presentation was streamed live to its 78,000 employees. The event was broadcasted flawlessly with MySQL as the database. Later in 2011, Hurricane Irene attacked the East Coast of United States and caused major life and financial damages. During the hurricane, the team directed more traffic to its west coast data center to avoid potential infrastructure damage in the East Coast. Such transition was executed smoothly and even though the geographical distance became longer for the East Coast users, there was no impact in the performance of Vzweb and Vztube, and the SLA goal was achieved. “MySQL is the key component of Verizon Wireless’ mission-critical employee portal application,” said Shivinder Singh, senior DBA at Verizon Wireless. “We achieved 1400% performance improvement by moving from the MyISAM storage engine to InnoDB, upgrading to the latest GA release MySQL 5.5, and using the MySQL Thread Pool to support high concurrent user connections. MySQL has become part of our IT infrastructure, on which potentially more future applications will be built.” To learn more about MySQL Enterprise Edition, Get our Product Guide.

    Read the article

  • Prevent Changing the Screen Saver and Wallpaper in Windows 7

    - by Mysticgeek
    Sometimes you might not want users to have the ability to change Screen Savers and Wallpaper on Windows 7 workstations. Today we look at how to prevent them from changing either one or both. You might administer computers in your home or small office and find it annoying when users continuously change the wallpaper and Screen Savers to something obnoxious. A lot of times they might be inexperienced users and download these so-called “wonderful and free” Screen Saver/Wallpaper packages from shady sites that include loads of Spyware. Preventing users from changing them is another helpful tool to avoid wasteful time spent switching things back. Prevent Changing Screensavers & Wallpaper Using Group Policy Editor  Note: This method uses Group Policy which is not available in Home versions on Windows 7. Open the Start Menu and enter gpedit.msc into the Search box and hit Enter. When Local Group Policy Editor opens, navigate to User Configuration \ Administrative Templates \ Control Panel \ Personalization. Then in the right column double-click on Prevent changing desktop background. Now check the radio button next to Enabled, then click OK. Back on the Group Policy Screen, double-click on Prevent changing screen saver. In the next screen select the radio button next to Enable, click OK, then close out of Group Policy Editor. Now when a user goes into the Personalization section, the Desktop Background hyperlink is now grayed out and inactive. Notice the message One or more of the settings on this page has been disabled by the system administrator at the bottom of the section. If they click to change the Screen Saver, an error message will pop up letting them know the function is disabled. Prevent Changing Screensavers & Wallpaper Using a Registry Hack You can also make a couple Registry changes to prevent users from changing the Wallpaper & Screen Saver…which will work on Home versions of Windows 7. Before making any Registry changes make sure you back it up first. Open the Registry by typing regedit into the Search box in the Start menu and hit Enter. First we’ll start with the Wallpaper. Navigate to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System and create a new String Value and name it Wallpaper. Then modify the Value data to point to the location of the Wallpaper you want it to always be. Where in this example it’s our main wallpaper on our local drive…then click OK. Now let’s make sure they can’t change the Screen Saver. In the same Registry location, we need to make a new DWORD (32-bit) Value. Give it the Value name of NoDispScrSavPage and the value data of “1” and click OK. Close out of the Registry and restart the machine or simply log off then back on again for the changes to take effect. Results For the Wallpapers, a user can still go in and see the selections, however if they try to change it to something else… It will just go back to the Personalization screen and no changes will be made, as we set the value to only be the background we specified. If the user tries to make a change to the Screen Saver, the hyperlink will be grayed out and inactive, and the message One or more of the settings on this page has been disabled by the system administrator will be displayed at the bottom of the section. Conclusion If you’re tired of users changing the Wallpaper and Screen Saver, and want another way to help avoid Malware, locking down these settings can help a lot. Again, before making any changes to the Registry, make sure to back it up. These settings should work in Vista and XP as well. Similar Articles Productive Geek Tips Save 1-4% More Battery Life With Windows Vista Battery SaverCustomize Your Windows Vista Logon ScreenEnable "Ubuntu Style" Logons in Windows VistaManage the Delete Confirmation Dialog box in Windows 7Dual Monitors: Use a Different Wallpaper on Each Desktop TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

  • Convert a PDF eBook to ePub Format

    - by Matthew Guay
    Would you like to read a PDF eBook on an eReader or mobile device, but aren’t happy with the performance? Here’s how you can convert your PDFs to the popular ePub format so you can easily read them on any device. PDFs are a popular format for eBooks since they render the same on any device and can preserve the exact layout of the print book.  However, this benefit is their major disadvantage on mobile devices, as you often have to zoom and pan back and forth to see everything on the page.  ePub files, on the other hand, are an increasingly popular option. They can reflow to fill your screen instead of sticking to a strict layout style.  With the free Calibre program, you can quickly convert your PDF eBooks to ePub format. Getting Started Download the Calibre installer (link below) for your operating system, and install as normal.  Calibre works on recent versions of Windows, OS X, and Linux.  The Calibre installer is very streamlined, so the install process was quite quick. Calibre is a great application for organizing your eBooks.  It can automatically sort your books by their metadata, and even display their covers in a Coverflow-style viewer. To add an eBook to your library, simply drag-and-drop the file into the Calibre window, or click Add books at the top.  Here you can choose to add all the books from a folder and more. Calibre will then add the book(s) to your library, import the associated metadata, and organize them in the catalog. Convert your Books Once you’ve imported your books into Calibre, it’s time to convert them to the format you want.  Select the book or books you want to convert, and click Convert E-books.  Select whether you want to convert them individually or bulk convert them. The convertor window has lots of options, so you can get your ePub book exactly like you want.  You can simply click Ok and go with the defaults, or you can tweak the settings. Do note that the conversion will only work successfully with PDFs that contain actual text.  Some PDFs are actually images scanned in from the original books; these will appear just like the PDF after the conversion, and won’t be any easier to read. On the first tab, you’ll notice that Calibri will repopulate most of the metadata fields with info from your PDF.  It will also use the first page of the PDF as the cover.  Edit any of the information that may be incorrect, and add any additional information you want associated with the book. If you want to convert your eBook to a different format other than ePub, Calibri’s got you covered, too.  On the top right, you can choose to output the converted eBook into a many different file formats, including the Kindle-friendly MOBI format. One other important settings page is the Structure Detection tab.  Here you can choose to have it remove headers and footers in the converted book, as well as automatically detect chapter breaks. Click Ok when you’ve finished choosing your settings and Calibre will convert the book.  This may take a few minutes, depending on the size of the PDF.  If the conversion seems to be taking too long, you can click Show job details for more information on the progress.   The conversion usually works good, but we did have one job freeze on us.  When we checked the job details, it indicated that the PDF was copy-protected.  Most PDF eBooks, however, worked fine. Now, back in the main Calibri window, select your book and save it to disk.  You can choose to save only the EPUB format, or you can select Save to disk to save all formats of the book to your computer. You can also view the ePub file directly in Calibri’s built-in eBook viewer.  This is the PDF book we converted, and it looks fairly good in the converted format.  It does have some odd line breaks and some misplaced numbers, but on the whole, the converted book is much easier to read, especially on small mobile devices.   Even images get included inline, so you shouldn’t be missing anything from the original eBook. Conclusion Calibri makes it simple to read your eBooks in any format you need. It is a project that is in constant development, and updates regularly adding better stability and features.  Whether you want to ready your PDF eBooks on a Sony Reader, Kindle, netbook or Smartphone, your books will now be more accessible than ever.  And with thousands of free PDF eBooks out there, you’ll be sure to always have something to read. If you’d like some Geeky PDF eBooks, Microsoft Press is offering a number of free PDF eBooks right now.  Check them out at this link (Account Required). Download the Calibre eBook program Similar Articles Productive Geek Tips Format a String as Currency in C#Convert Older Excel Documents to Excel 2007 FormatShare OneNote 2010 Notebooks with OneNote 2007Install an RPM Package on Ubuntu LinuxConvert PDF Files to Word Documents and Other Formats TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

    Read the article

  • top tweets WebLogic Partner Community – March 2012

    - by JuergenKress
    Send us your tweets @wlscommunity #WebLogicCommunity and follow us on twitter http://twitter.com/wlscommunity PeterPaul ? RT @JDeveloper: EJB 3 Deployment guide for WebLogic Server Version: 10.3.4.0 dlvr.it/1J5VcV Andrejus Baranovskis ?Open ADF PopUp on Page Load fb.me/1Rx9LP3oW Sten Vesterli ? RT @OracleBlogs: Using the Oracle E-Business Suite SDK for Java on ADF Applications ow.ly/1hVKbB <- Neat! No more WS calls Java Buddy ?JavaFX 2.0: Example of MediaPlay java-buddy.blogspot.com/2012/03/javafx… Georges Saab Build improvements coming to #openJDK for #jdk8 mail.openjdk.java.net/pipermail/buil… NetBeans Team Share your #Java experience! JavaOne 2012 India call for papers: ow.ly/9xYg0 GlassFish ? GlassFish 3.1.2 Screencasts & Videos – bit.ly/zmQjn2 chriscmuir ?G+: New blog post: ADF Runtimes vs WLS versions as of JDeveloper 11.1.1.6.0 – bit.ly/y8tkgJ Michael Heinrichs New article: Creating a Sprite Animation with JavaFX blog.netopyr.com/2012/03/09/cre… Oracle WebLogic ? #WebLogic Devcast Webinar Series for March: Enterprise Java Scale Out, JPA, Distributed Grid Data Cache bit.ly/zeUXEV #Coherence Andrejus Baranovskis ?Extending Application Module for ADF BC Proxy User DB Connection fb.me/Bj1hLUqm OTNArchBeat ? Oracle Fusion Middleware on JDK 7 | Mark Nelson bit.ly/w7IroZ OTNArchBeat ? Java Champion Jonas Bonér Explains the Akka Platform bit.ly/x2GbXm Adam Bien ? (Java) FX Experience Tools–Feels Like Native Mac App: FX Experience Tools application comes with a native Mac O… bit.ly/waHF3H GlassFish ? GlassFish new recruit and Eclipse integration progress – bit.ly/y5eEkk JDeveloper & ADF Prototyping ADF Libraries dlvr.it/1Hhnw0 Eric Elzinga ?Oracle Fusion Middleware on JDK 7, bit.ly/xkphFQ ADF EMG ? Working with ADF in Arabic, Hebrew or other right-to-left-written language? Oracle UX asks for your help. groups.google.com/forum/?fromgro… Java ? A simple #JavaFX Login Form with a TRON like effect ow.ly/9n9AG JDeveloper & ADF ? Logging in Oracle ADF Applications dlvr.it/1HZhcX OTNArchBeat ? Oracle Cloud Conference: dates and locations worldwide bit.ly/ywXydR UK Oracle User Group ? Simon Haslam, ACE Director present on #WebLogic for DBAs at #oug_ire2012 j.mp/zG6vz3 @oraclewebcenter @oracleace #dublin Steven Davelaar ? Working with ADF and not a member of ADF EMG? You miss lots of valuable info, join now! sites.google.com/site/oracleemg… Simon Haslam @MaciejGruszka: Oracle plans to provide Forms & Reports plug-in for OVAB next year to help deployment. #ukoug MW SIG GlassFish ? Introducing JSR 357: Social Media API – bit.ly/yC8vez JAX London ? Are you coming to Java EE workshops by @AdamBien at JAX Days? Save £100 by registering today. #jaxdays #javaee jaxdays.com WebLogic Community ?Welcome to our Munich WebLogic 12c Bootcamp in Munich! If you also want to attend a training register for the Community oracle.com/partners/goto/… chriscmuir ? My first webcast for Oracle! (be kind) Basing ADF Business Component View Objects on More that one Entity Object bit.ly/ArKija OTNArchBeat ? Oracle Weblogic Server 12c is available on Oracle Solaris 11 (SPARC and x86) bit.ly/xE3TLg JDeveloper & ADF ? Basing ADF Business Component View Objects on More that one Entity Object – YouTube dlvr.it/1H93Qr OTNArchBeat ? Application-Driven Virtualization with Oracle Virtual Assembly Builder | Ronen Kofman bit.ly/wF1C1N Oracle WebLogic ? Steve Button’s blog: WebLogic Server Singleton Services ow.ly/1hOu4U Barbara Ann May ?@oracledevtools: New update: #NetBeans IDE 7.1.1, with support for #GlassFish 3.1.2 bit.ly/mOLcQd #java #developer OTNArchBeat ? Using Coherence with JDeveloper: bit.ly/AkoEQb WebLogic Community ? WebLogic Partner Community Newsletter February 2012 wp.me/p1LMIb-f3 GlassFish ? GlassFish 3.1.2 – new Podcast episode : bit.ly/wc6oBE Frank Nimphius ?Cool! Open JDeveloper 11.1.1.5, go help–>check for updates. First thing shown is that 11.1.1.6 is available. Never miss a new release Adam Bien ?5 Minutes (Video) With Java EE …Or With NetBeans + GlassFish: This screencast covers a 5-minute development of a… bit.ly/xkOJMf WebLogic Community ? Free Oracle WebLogic Certification Application Grid Implementation Specialist wp.me/p1LMIb-eT OTNArchBeat ?Oracle Coherence: First Steps Using Clusters and Basic API Usage | Ricardo Ferreira bit.ly/yYQ3Wz GlassFish ? JMS 2.0 Early Draft is here – bit.ly/ygT1VN OTNArchBeat ? Exalogic Networking Part 2 | The Old Toxophilist bit.ly/xuYMIi OTNArchBeat ?New Release: GlassFish Server 3.1.2. Read All About It! | Paul Davies bit.ly/AtlGxo Oracle WebLogic ?OTN Virtual Developer Day: #WebLogic 12c & #Coherence ost-conference on-demand page live with bonus #Virtualbox lab – bit.ly/xUy6BJ Oracle WebLogic ? Steve Button’s blog: WebLogic Server 11g (10.3.6) Documentation ow.ly/1hJgUB Lucas Jellema ? Just published an article on the AMIS blog: technology.amis.nl/2012/03/adf-11… ADF 11g – programmatically sorting rich table columns. Java Certification ? New Course! Learn how to create mobile applications using Java ME: bit.ly/xZj1Jh Simon Haslam ? @MaciejGruszka WebLogic 12c can run against 11g domain config without changes …and can rollback to 11. #ukoug MW SIG Justin Kestelyn ? Learn Advanced ADF, free and online bit.ly/wEKSRc WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: twitter,WebLogic,WebLogic Community,OPN,Oracle,Jürgen Kress,WebLogic 12c

    Read the article

  • ASP.NET Web API - Screencast series Part 4: Paging and Querying

    - by Jon Galloway
    We're continuing a six part series on ASP.NET Web API that accompanies the getting started screencast series. This is an introductory screencast series that walks through from File / New Project to some more advanced scenarios like Custom Validation and Authorization. The screencast videos are all short (3-5 minutes) and the sample code for the series is both available for download and browsable online. I did the screencasts, but the samples were written by the ASP.NET Web API team. In Part 1 we looked at what ASP.NET Web API is, why you'd care, did the File / New Project thing, and did some basic HTTP testing using browser F12 developer tools. In Part 2 we started to build up a sample that returns data from a repository in JSON format via GET methods. In Part 3, we modified data on the server using DELETE and POST methods. In Part 4, we'll extend on our simple querying methods form Part 2, adding in support for paging and querying. This part shows two approaches to querying data (paging really just being a specific querying case) - you can do it yourself using parameters passed in via querystring (as well as headers, other route parameters, cookies, etc.). You're welcome to do that if you'd like. What I think is more interesting here is that Web API actions that return IQueryable automatically support OData query syntax, making it really easy to support some common query use cases like paging and filtering. A few important things to note: This is just support for OData query syntax - you're not getting back data in OData format. The screencast demonstrates this by showing the GET methods are continuing to return the same JSON they did previously. So you don't have to "buy in" to the whole OData thing, you're just able to use the query syntax if you'd like. This isn't full OData query support - full OData query syntax includes a lot of operations and features - but it is a pretty good subset: filter, orderby, skip, and top. All you have to do to enable this OData query syntax is return an IQueryable rather than an IEnumerable. Often, that could be as simple as using the AsQueryable() extension method on your IEnumerable. Query composition support lets you layer queries intelligently. If, for instance, you had an action that showed products by category using a query in your repository, you could also support paging on top of that. The result is an expression tree that's evaluated on-demand and includes both the Web API query and the underlying query. So with all those bullet points and big words, you'd think this would be hard to hook up. Nope, all I did was change the return type from IEnumerable<Comment> to IQueryable<Comment> and convert the Get() method's IEnumerable result using the .AsQueryable() extension method. public IQueryable<Comment> GetComments() { return repository.Get().AsQueryable(); } You still need to build up the query to provide the $top and $skip on the client, but you'd need to do that regardless. Here's how that looks: $(function () { //--------------------------------------------------------- // Using Queryable to page //--------------------------------------------------------- $("#getCommentsQueryable").click(function () { viewModel.comments([]); var pageSize = $('#pageSize').val(); var pageIndex = $('#pageIndex').val(); var url = "/api/comments?$top=" + pageSize + '&$skip=' + (pageIndex * pageSize); $.getJSON(url, function (data) { // Update the Knockout model (and thus the UI) with the comments received back // from the Web API call. viewModel.comments(data); }); return false; }); }); And the neat thing is that - without any modification to our server-side code - we can modify the above jQuery call to request the comments be sorted by author: $(function () { //--------------------------------------------------------- // Using Queryable to page //--------------------------------------------------------- $("#getCommentsQueryable").click(function () { viewModel.comments([]); var pageSize = $('#pageSize').val(); var pageIndex = $('#pageIndex').val(); var url = "/api/comments?$top=" + pageSize + '&$skip=' + (pageIndex * pageSize) + '&$orderby=Author'; $.getJSON(url, function (data) { // Update the Knockout model (and thus the UI) with the comments received back // from the Web API call. viewModel.comments(data); }); return false; }); }); So if you want to make use of OData query syntax, you can. If you don't like it, you're free to hook up your filtering and paging however you think is best. Neat. In Part 5, we'll add on support for Data Annotation based validation using an Action Filter.

    Read the article

  • Big Data – Evolution of Big Data – Day 3 of 21

    - by Pinal Dave
    In yesterday’s blog post we answered what is the Big Data. Today we will understand why and how the evolution of Big Data has happened. Though the answer is very simple, I would like to tell it in the form of a history lesson. Data in Flat File In earlier days data was stored in the flat file and there was no structure in the flat file.  If any data has to be retrieved from the flat file it was a project by itself. There was no possibility of retrieving the data efficiently and data integrity has been just a term discussed without any modeling or structure around. Database residing in the flat file had more issues than we would like to discuss in today’s world. It was more like a nightmare when there was any data processing involved in the application. Though, applications developed at that time were also not that advanced the need of the data was always there and there was always need of proper data management. Edgar F Codd and 12 Rules Edgar Frank Codd was a British computer scientist who, while working for IBM, invented the relational model for database management, the theoretical basis for relational databases. He presented 12 rules for the Relational Database and suddenly the chaotic world of the database seems to see discipline in the rules. Relational Database was a promising land for all the unstructured database users. Relational Database brought into the relationship between data as well improved the performance of the data retrieval. Database world had immediately seen a major transformation and every single vendors and database users suddenly started to adopt the relational database models. Relational Database Management Systems Since Edgar F Codd proposed 12 rules for the RBDMS there were many different vendors who started them to build applications and tools to support the relationship between database. This was indeed a learning curve for many of the developer who had never worked before with the modeling of the database. However, as time passed by pretty much everybody accepted the relationship of the database and started to evolve product which performs its best with the boundaries of the RDBMS concepts. This was the best era for the databases and it gave the world extreme experts as well as some of the best products. The Entity Relationship model was also evolved at the same time. In software engineering, an Entity–relationship model (ER model) is a data model for describing a database in an abstract way. Enormous Data Growth Well, everything was going fine with the RDBMS in the database world. As there were no major challenges the adoption of the RDBMS applications and tools was pretty much universal. There was a race at times to make the developer’s life much easier with the RDBMS management tools. Due to the extreme popularity and easy to use system pretty much every data was stored in the RDBMS system. New age applications were built and social media took the world by the storm. Every organizations was feeling pressure to provide the best experience for their users based the data they had with them. While this was all going on at the same time data was growing pretty much every organization and application. Data Warehousing The enormous data growth now presented a big challenge for the organizations who wanted to build intelligent systems based on the data and provide near real time superior user experience to their customers. Various organizations immediately start building data warehousing solutions where the data was stored and processed. The trend of the business intelligence becomes the need of everyday. Data was received from the transaction system and overnight was processed to build intelligent reports from it. Though this is a great solution it has its own set of challenges. The relational database model and data warehousing concepts are all built with keeping traditional relational database modeling in the mind and it still has many challenges when unstructured data was present. Interesting Challenge Every organization had expertise to manage structured data but the world had already changed to unstructured data. There was intelligence in the videos, photos, SMS, text, social media messages and various other data sources. All of these needed to now bring to a single platform and build a uniform system which does what businesses need. The way we do business has also been changed. There was a time when user only got the features what technology supported, however, now users ask for the feature and technology is built to support the same. The need of the real time intelligence from the fast paced data flow is now becoming a necessity. Large amount (Volume) of difference (Variety) of high speed data (Velocity) is the properties of the data. The traditional database system has limits to resolve the challenges this new kind of the data presents. Hence the need of the Big Data Science. We need innovation in how we handle and manage data. We need creative ways to capture data and present to users. Big Data is Reality! Tomorrow In tomorrow’s blog post we will try to answer discuss Basics of Big Data Architecture. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • Happy 3rd Birthday SilverlightCream!

    - by Dave Campbell
    Happy 3rd Birthday!     Yesterday (May 16) was the 'Birthday' of SilverlightCream, which started just after MIX in 2007 with a post "Interesting Silverlight posts today: Silverlight Control & Silverlight Pad". Too many good posts flying around led me to want to archive them, particularly since I was being aggregated at a new site Silverlight.net, and I could give some of that 'reach' to the community. Saturday's post was number 862, and as of that post, there were 5697 blog posts archived in the database all tagged up and searchable at SilverlightCream.com using the search page. The search needs to be better, and that's another discussion, but it does work. The blog didn't begin life as the SilverlightCream blog, as is obvious from the name, but once I realized people were following it closely, I've tried to keep the signal-to-noise ratio very high. I even secured another blog for when I just want to rant about something to keep that stuff out of this one :) If you've been around since MIX07 days you've heard all this, but after talking to some people at MIX10 I realized not everyone knows all the ways the information is presented, so I figured doing a post like this once a year probably isn't a bad idea :) I scrounge through an ever-growing list of blogs (right now sitting at 505) looking for good stuff. I try to spin through the list every day, but with the list growing that large, it's getting tough. I usually use it as a background task while working or watching TV. If I just sit and go through the blogs it takes about an hour. The list is long enough now that from time to time, I'll only get partway through it and have 10 to 13 entries, so I'll just stop there and go on the next day... I don't like to have more than 15 in any single post. It's all pattern recognition as in "seen that", "seen that", "that's new", etc... so if you're a blogger, look at a heading below for some comments about blogging from my perspective. When I see something new, I make sure you're not pulling a 'Mike Taulty' on me and dumping 6 or 8 new posts in one day :), and I tag the ones I want to review. If there's not a lot going on, I may just push the posts as I come across them. Some days there may be 60 posts in that 'to review' list! Some are non-Silverlight, some are essentially duplicates of others, some are demos, ads, new releases of something, session materials, etc. I push lots of material into a database at WynApse.com, and the "Tagged Posts" menu on the left sidebar there takes you to a tag cloud of (at this very moment) "9224 articles tagged 13915 different ways using 459 unique tags". There are links in there on Gibson guitars, Jazz Guitar instructional stuff, Ford F-250 links, and tons of technical and non-technical stuff I've been aggregating for about 5 years now. So when I decide to blog (or shoutout) something, I first push it into the database at WynApse.com. Then I tag it all up and push it into the database at SilverlightCream.com. Then it gets pushed to @SilverlightNews. For a little over a year now, we're tracking unique IP hits on posts launched from either the blog post or from one of the SilverlightCream.com pages, and the posts with top hits from unique IP addresses in the last 7 days are displayed in a 'Skim' page at SilverlightCream... and that page needs work as well. The Skim page and tracking was the brainchild of my buddy Michael Washington. What I blog/shoutout After some time doing posts, I decided there were things that probably have no need to be searchable, but are good information, so I post those as 'Shoutouts'. Eventually I also decided the Shoutouts should get posted to @SilverlightNews, and that's now taking place. Notes to bloggers Remember I said spinning throught the Big List-o-BlogsTM is pattern recognition... that means I don't spend a lot of time on any individual blog deciding if it has new content. If you're familiar with the term 'Above the Fold', then you're probably ok. If I have to scroll the page to see if there's something new, or wade through some maze of menus, I'm probably going to miss new stuff. Likewise if you only show the latest on the front page and make it a puzzle to find the rest of them, or if you make the titles and initial graphics almost identical to the previous article, I'll miss it. Another thing is name/brand-recognition. Far be it for me (WynApse) to comment on someone blogging with a pseudonym, but if you want to get get some recognition, you are going to want your name to be available somewhere. I can think right off the top of my head of a couple good blogs that I have no idea of the individuals' real names. I can pull that off a bit because I've been around so long almost everyone knows who I am, but if you're new to the blog-o-sphere, being able to be name-recognized is as important as getting your brand out there. Kick my tires Finally, stuff happens... I may hit the wrong key and delete your blog, or a post might slip past me and I not realize it's new because of the naming, and never blog it. If you think I missed something, send me an email or use the submit page at SilverlightCream.com. Some bloggers have figured out that if they submit (one way or another) to me, their posts will go out next. I try to honor anyone that takes the time to submit with a quicker 'Cream posting. Thanks! Finally, thanks to everyone that contributes to the community as a whole... the blogs, the videos, and the presentations. A special thanks to everyone that reads SilverlightCream, or follows @WynApse or @SilverlightNews. Keep it all coming, and... Stay in the 'Light

    Read the article

  • How to Buy an SD Card: Speed Classes, Sizes, and Capacities Explained

    - by Chris Hoffman
    Memory cards are used in digital cameras, music players, smartphones, tablets, and even laptops. But not all SD cards are created equal — there are different speed classes, physical sizes, and capacities to consider. Different devices require different types of SD cards. Here are the differences you’ll need to keep in mind when picking out the right SD card for your device. Speed Class In a nutshell, not all SD cards offer the same speeds. This matters for some tasks more than it matters for others. For example, if you’re a professional photographer taking photos in rapid succession on a DSLR camera saving them in high-resolution RAW format, you’ll want a fast SD card so your camera can save them as fast as possible. A fast SD card is also important if you want to record high-resolution video and save it directly to the SD card. If you’re just taking a few photos on a typical consumer camera or you’re just using an SD card to store some media files on your smartphone, the speed isn’t as important. Manufacturers use “speed classes” to measure an SD card’s speed. The SD Association that defines the SD card standard doesn’t actually define the exact speeds associated with these classes, but they do provide guidelines. There are four different speed classes — 10, 8, 4, and 2. 10 is the fastest, while 2 is the slowest. Class 2 is suitable for standard definition video recording, while classes 4 and 6 are suitable for high-definition video recording. Class 10 is suitable for “full HD video recording” and “HD still consecutive recording.” There are also two Ultra High Speed (UHS) speed classes, but they’re more expensive and are designed for professional use. UHS cards are designed for devices that support UHS. Here are the associated logos, in order from slowest to fastest:       You’ll probably be okay with a class 4 or 6 card for typical use in a digital camera, smartphone, or tablet. Class 10 cards are ideal if you’re shooting high-resolution videos or RAW photos. Class 2 cards are a bit on the slow side these days, so you may want to avoid them for all but the cheapest digital cameras. Even a cheap smartphone can record HD video, after all. An SD card’s speed class is identified on the SD card itself. You’ll also see the speed class on the online store listing or on the card’s packaging when purchasing it. For example, in the below photo, the middle SD card is speed class 4, while the two other cards are speed class 6. If you see no speed class symbol, you have a class 0 SD card. These cards were designed and produced before the speed class rating system was introduced. They may be slower than even a class 2 card. Physical Size Different devices use different sizes of SD cards. You’ll find standard-size CD cards, miniSD cards, and microSD cards. Standard SD cards are the largest, although they’re still very small. They measure 32x24x2.1 mm and weigh just two grams. Most consumer digital cameras for sale today still use standard SD cards. They have the standard “cut corner”  design. miniSD cards are smaller than standard SD cards, measuring 21.5x20x1.4 mm and weighing about 0.8 grams. This is the least common size today. miniSD cards were designed to be especially small for mobile phones, but we now have a smaller size. microSD cards are the smallest size of SD card, measuring 15x11x1 mm and weighing just 0.25 grams. These cards are used in most cell phones and smartphones that support SD cards. They’re also used in many other devices, such as tablets. SD cards will only fit into marching slots. You can’t plug a microSD card into a standard SD card slot — it won’t fit. However, you can purchase an adapter that allows you to plug a smaller SD card into a larger SD card’s form and fit it into the appropriate slot. Capacity Like USB flash drives, hard drives, solid-state drives, and other storage media, different SD cards can have different amounts of storage. But the differences between SD card capacities don’t stop there. Standard SDSC (SD) cards are 1 MB to 2 GB in size, or perhaps 4 GB in size — although 4 GB is non-standard. The SDHC standard was created later, and allows cards 2 GB to 32 GB in size. SDXC is a more recent standard that allows cards 32 GB to 2 TB in size. You’ll need a device that supports SDHC or SDXC cards to use them. At this point, the vast majority of devices should support SDHC. In fact, the SD cards you have are probably SDHC cards. SDXC is newer and less common. When buying an SD card, you’ll need to buy the right speed class, size, and capacity for your needs. Be sure to check what your device supports and consider what speed and capacity you’ll actually need. Image Credit: Ryosuke SEKIDO on Flickr, Clive Darra on Flickr, Steven Depolo on Flickr

    Read the article

  • Check Your Spelling, Grammar, and Style in Firefox and Chrome

    - by Matthew Guay
    Are you tired of making simple writing mistakes that get past your browser’s spell-check?  Here’s how you can get advanced grammar check and more in Firefox and Chrome with After the Deadline. Microsoft Word has spoiled us with grammar, syntax, and spell checking, but the default spell check in Firefox and Chrome still only does basic checks.  Even webapps like Google Docs don’t check more than basic spelling errors.  However, WordPress.com is an exception; it offers advanced spelling, grammar, and syntax checking with its After the Deadline proofing system.  This helps you keep from making embarrassing mistakes on your blog posts, and now, thanks to a couple free browser plugins, it can help you keep from making these mistakes in any website or webapp. After the Deadline in Google Chrome Add the After the Deadline extension (link below) to Chrome as usual. As soon as it’s installed, you’re ready to start improving your online writing.  To check spelling, grammar, and more, click the ABC button that you’ll now see at the bottom of most text boxes online. After a quick scan, grammar mistakes are highlighted in green, complex expressions and other syntax problems are highlighted in blue, and spelling mistakes are highlighted in red as would be expected.  Click on an underlined word to choose one of its recommended changes or ignore the suggestion. Or, if you want more explanation about what was wrong with that word or phrase, click Explain for more info. And, if you forget to run an After the Deadline scan before submitting a text entry, it will automatically check to make sure you still want to submit it.  Click Cancel to go back and check your writing first.   To change the After the Deadline settings, click its icon in the toolbar and select View Options.  Additionally, if you want to disable it on the site you’re on, you can click Disable on this site directly from the popup. From the settings page, you can choose extra things to check for such as double negatives and redundant phrases, as well as add sites and words to ignore. After the Deadline in Firefox Add the After the Deadline add-on to Firefox (link below) as normal. After the Deadline basically the same in Firefox as it does in Chrome.  Select the ABC icon in the lower right corner of textboxes to check them for problems, and After the Deadline will underline the problems as it did in Chrome.  To view a suggested change in Firefox, right-click on the underlined word and select the recommended change or ignore the suggestion. And, if you forget to check, you’ll see a friendly reminder asking if you’re sure you want to submit your text like it is. You can access the After the Deadline settings in Firefox from the menu bar.  Click Tools, then select AtD Preferences.  In Firefox, the settings are in a options dialog with three tabs, but it includes the same options as the Chrome settings page.  Here you can make After the Deadline as correction-happy as you like.   Conclusion The web has increasingly become an interactive place, and seldom does a day go by that we aren’t entering text in forms and comments that may stay online forever.  Even our insignificant tweets are being archived in the Library of Congress.  After the Deadline can help you make sure that your permanent internet record is as grammatically correct as possible.  Even though it doesn’t catch every problem, and even misses some spelling mistakes, it’s still a great help. Links Download the After the Deadline extension for Google Chrome Download the After the Deadline add-on for Firefox Similar Articles Productive Geek Tips Quick Tip: Disable Favicons in FirefoxStupid Geek Tricks: Duplicate a Tab with a Shortcut Key in Chrome or FirefoxHow to Disable the New Geolocation Feature in Google ChromeStupid Geek Tricks: Compare Your Browser’s Memory Usage with Google ChromeStop YouTube Videos from Automatically Playing in Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools

    Read the article

  • View Docs and PDFs Directly in Google Chrome

    - by Matthew Guay
    Would you like to view documents, presentations, and PDFs directly in Google Chrome?  Here’s a handy extension that makes Google Docs your default online viewer so don’t have to download the file first. Getting Started By default, when you come across a PDF or other common document file online in Google Chrome, you’ll have to download the file and open it in a separate application. It’d be much easier to simply view online documents directly in Chrome.  To do this, head over to the Docs PDF/PowerPoint Viewer page on the Chrome Extensions site (link below), and click Install to add it to your browser. Click Install to confirm that you want to install this extension. Extensions don’t run by default in Incognito mode, so if you’d like to always view documents directly in Chrome, open the Extensions page and check Allow this extension to run in incognito. Now, when you click a link for a document online, such as a .docx file from Word, it will open in the Google Docs viewer. These documents usually render in their original full-quality.  You can zoom in and out to see exactly what you want, or search within the document.  Or, if it doesn’t look correct, you can click the Download link in the top left to save the original document to your computer and open it in Office.   Even complex PDF render very nicely.  Do note that Docs will keep downloading the document as you’re reading it, so if you jump to the middle of a document it may look blurry at first but will quickly clear up. You can even view famous presentations online without opening them in PowerPoint.  Note that this will only display the slides themselves, but if you’re looking for information you likely don’t need the slideshow effects anyway.   Adobe Reader Conflicts If you already have Adobe Acrobat or Adobe Reader installed on your computer, PDF files may open with the Adobe plugin.  If you’d prefer to read your PDFs with the Docs PDF Viewer, then you need to disable the Adobe plugin.  Enter the following in your Address Bar to open your Chrome Plugins page: chrome://plugins/ and then click Disable underneath the Adobe Acrobat plugin. Now your PDFs will always open with the Docs viewer instead. Performance Who hasn’t been frustrated by clicking a link to a PDF file, only to have your browser pause for several minutes while Adobe Reader struggles to download and display the file?  Google Chrome’s default behavior of simply downloading the files and letting you open them is hardly more helpful.  This extension takes away both of these problems, since it renders the documents on Google’s servers.  Most documents opened fairly quickly in our tests, and we were able to read large PDFs only seconds after clicking their link.  Also, the Google Docs viewer rendered the documents much better than the HTML version in Google’s cache. Google Docs did seem to have problem on some files, and we saw error messages on several documents we tried to open.  If you encounter this, click the Download link in the top left corner to download the file and view it from your desktop instead. Conclusion Google Docs has improved over the years, and now it offers fairly good rendering even on more complex documents.  This extension can make your browsing easier, and help documents and PDFs feel more like part of the Internet.  And, since the documents are rendered on Google’s servers, it’s often faster to preview large files than to download them to your computer. Link Download the Docs PDF/PowerPoint Viewer extension from Google Similar Articles Productive Geek Tips Integrate Google Docs with Outlook the Easy WayGoogle Image Search Quick FixView the Time & Date in Chrome When Hiding Your TaskbarView Maps and Get Directions in Google ChromeHow To Export Documents from Google Docs to Your Computer TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium

    Read the article

  • Superpower Your Touchpad Computer with Scrybe

    - by Matthew Guay
    Are you looking for a way to help your Touchpad computer make you more productive?  Here’s a quick look at Scrybe, a new application from Synaptics that lets you superpower it. Touchpad devices have become increasingly more interesting as they’ve included support for multi-touch gestures.  Scrybe takes it to the next level and lets you use your touchpad as an application launcher.  You can launch any application, website, or complete many common commands on your computer with a simple gesture.  Scrybe works with most modern Synaptics touchpads, which are standard on most laptops and netbooks.  It is optimized for newer multi-touch touchpads, but can also work with standard single-touch touchpads.  It works on Windows 7, Vista, and XP, so chances are it will work with your laptop or netbook. Get Started With Scrybe Head over to the Scrybe website and download the latest version (link below).  You are asked to enter your email address, name, and information about your computer…but you actually only have to enter your email address.  Click Download when finished. Run the installer when it’s download.  It will automatically download the latest Synaptics driver for your touchpad and any other components needed for Scrybe.  Note that the Scrybe installer will ask to install the Yahoo! toolbar, so uncheck this to avoid adding this worthless browser toolbar. Using Scrybe To open an application or website with a gesture, press 3 fingers on your touchpad at once, or if your touchpad doesn’t support multi-touch gestures, then press Ctrl+Alt and press 1 finger on your touchpad.  This will open the Scrype input pane; start drawing a gesture, and you’ll see it on the grey square.  The input pane shows some default gestures you can try. Here we drew an “M”, which opens our default Music player.  As soon as you finish the gesture and lift up your finger, Scrybe will open the application or website you selected. A notification balloon will let you know what gesture was preformed. When you’re entering your gesture, the input pane will show white “ink”.  The “ink” will turn blue if the command is recognized, but will turn red if it isn’t.  If Scrybe doesn’t recognize your command, press 3 fingers and try again. Scrybe Control Panel You can open the Scrybe Control panel to enter or change commands by entering a box-like gesture, or right-clicking the Scrybe icon in your system tray and selecting “Scrybe Control Panel”. Scrybe has many pre-configured gestures that you can preview and even practice. All of the gestures in the Popular tab are preset and cannot be changed.  However, the ones in the favorites tab can be edited.  Select the gesture you wish to edit, and click the gear icon to change it.  Here we changed the email gesture to open Hotmail instead of the default Yahoo Mail. Scrybe can also help you perform many common Windows commands such as Copy and Undo.  Select the Tools tab to see all of these commands.   Scrybe has many settings you may wish to change.  Select the Preferences button in the Control Panel to change these.  Here’s some of the settings we changed. Uncheck “Display a message” to turn off the tooltip notifications when you enter a gesture Uncheck “Show symbol hints” to turn off the sidebar on the input pane Select the search engine you want to open with the Search Gesture.  The default is Yahoo, but you can choose your favorite. Adding a new Scrybe Gesture The default Scrybe options are useful, but the best part is that you can assign gestures to your own programs or websites.  Open the Scrybe control panel, and click the plus sign on the bottom left corner.  Enter a name for your gesture, and then choose if it is for a website or an application. If you want the gesture to open a website, enter the address in the box. Alternately, if you want your gesture to open an application, select Launch Application and then either enter the path to the application, or click the button beside the Launch field and browse to it. Now click the down arrow on the blue box and choose one of the gestures for your application or website. Your new gesture will show up under the Favorites tab in the Scrybe control panel, and you can use it whenever you want from Scrybe, or practice the gesture by selecting the Practice button. Conclusion If you enjoy multi-touch gestures, you may find Scrybe very useful on your laptop or netbook.  Scrybe recognizes gestures fairly easily, even if you don’t enter them perfectly correctly.  Just like pinch-to-zoom and two-finger scroll, Scrybe can quickly become something you miss on other laptops. Download Scrybe (registration required) Similar Articles Productive Geek Tips Fixing Firefox Scrolling Problems with Dell Synaptics TouchpadRemove Synaptics Touchpad Icon from System TrayRoll Back Troublesome Device Drivers in Windows VistaChange Your Computer Name in Windows 7 or VistaLet Somebody Use Your Computer Without Logging Off in Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

  • Searching for the Perfect Developer&rsquo;s Laptop.

    - by mbcrump
    I have been in the market for a new computer for several months. I set out with a budget of around $1200. I knew up front that the machine would be used for developing applications and maybe some light gaming. I kept switching between buying a laptop or a desktop but the laptop won because: With a Laptop, I can carry it everywhere and with a desktop I can’t. I searched for about 2 weeks and narrowed it down to a list of must-have’s : i7 Processor (I wasn’t going to settle for an i5 or AMD. I wanted a true Quad-core machine, not 2 dual-core fused together). 15.6” monitor SSD 128GB or Larger. – It’s almost 2011 and I don’t want an old standard HDD in this machine. 8GB of DDR3 Ram. – The more the better, right? 1GB Video Card (Prefer NVidia) – I might want to play games with this. HDMI Port – Almost a standard on new Machines. This would be used when I am on the road and want to stream Netflix to the HDTV in the Hotel room. Webcam Built-in – This would be to video chat with the wife and kids if I am on the road. 6-Cell Battery. – I’ve read that an i7 in a laptop really kills the battery. A 6-cell or 9-cell is even better. That is a pretty long list for a budget of around $1200. I searched around the internet and could not buy this machine prebuilt for under $1200. That was even with coupons and my company’s 10% Dell discount. The only way that I would get a machine like this was to buy a prebuilt and replace parts. I chose the  Lenovo Y560 on Newegg to start as my base. Below is a top-down picture of it.   Part 1: The Hardware The Specs for this machine: Color :  GrayOperating System : Windows 7 Home Premium 64-bitCPU Type : Intel Core i7-740QM(1.73GHz)Screen : 15.6" WXGAMemory Size : 4GB DDR3Hard Disk : 500GBOptical Drive : DVD±R/RWGraphics Card : ATI Mobility Radeon HD 5730Video Memory : 1GBCommunication : Gigabit LAN and WLANCard slot : 1 x Express Card/34Battery Life : Up to 3.5 hoursDimensions : 15.20" x 10.00" x 0.80" - 1.30"Weight : 5.95 lbs. This computer met most of the requirements above except that it didn’t come with an SSD or have 8GB of DDR3 Memory. So, I needed to start shopping except this time for an SSD. I asked around on twitter and other hardware forums and everyone pointed me to the Crucial C300 SSD. After checking prices of the drive, it was going to cost an extra $275 bucks and I was going from a spacious 500GB drive to 128GB. After watching some of the SSD videos on YouTube I started feeling better. Below is a pic of the Crucial C300 SSD. The second thing that I needed to upgrade was the RAM. It came with 4GB of DDR3 RAM, but it was slow. I decided to buy the Crucial 8GB (4GB x 2) Kit from Newegg. This RAM cost an extra $120 and had a CAS Latency of 7. In the end this machine delivered everything that I wanted and it cost around $1300. You are probably saying, well your budget was $1200. I have spare parts that I’m planning on selling on eBay or Anandtech.  =) If you are interested then shoot me an email and I will give you a great deal mbcrump[at]gmail[dot]com. 500GB Laptop 7200RPM HDD 4GB of DDR3 RAM (2GB x 2) faceVision HD 720p Camera – Unopened In the end my Windows Experience Rating of the SSD was 7.7 and the CPU 7.1. The max that you can get is a 7.9. Part 2: The Software I’m very lucky that I get a lot of software for free. When choosing a laptop, the OS really doesn’t matter because I would never keep the bloatware pre-installed or Windows 7 Home Premium on my main development machine. Matter of fact, as soon as I got the laptop, I immediately took out the old HDD without booting into it. After I got the SSD into the machine, I installed Windows 7 Ultimate 64-Bit. The BIOS was out of date, so I updated that to the latest version and started downloading drivers off of Lenovo’s site. I had to download the Wireless Networking Drivers to a USB-Key before I could get my machine on my wireless network. I also discovered that if the date on your computer is off then you cannot join the Windows 7 Homegroup until you fix it. I’m aware that most people like peeking into what programs other software developers use and I went ahead and listed my “essentials” of a fresh build. I am a big Silverlight guy, so naturally some of the software listed below is specific to Silverlight. You should also check out my master list of Tools and Utilities for the .NET Developer. See a killer app that I’m missing? Feel free to leave it in the comments below. My Software Essential List. CPU-Z Dropbox Everything Search Tool Expression Encoder Update Expression Studio 4 Ultimate Foxit Reader Google Chrome Infragistics NetAdvantage Ultimate Edition Keepass Microsoft Office Professional Plus 2010 Microsoft Security Essentials 2  Mindscape Silverlight Elements Notepad 2 (with shell extension) Precode Code Snippet Manager RealVNC Reflector ReSharper v5.1.1753.4 Silverlight 4 Toolkit Silverlight Spy Snagit 10 SyncFusion Reporting Controls for Silverlight Telerik Silverlight RadControls TweetDeck Virtual Clone Drive Visual Studio 2010 Feature Pack 2 Visual Studio 2010 Ultimate VS KB2403277 Update to get Feature Pack 2 to work. Windows 7 Ultimate 64-Bit Windows Live Essentials 2011 Windows Live Writer Backup. Windows Phone Development Tools That is pretty much it, I have a new laptop and am happy with the purchase. If you have any questions then feel free to leave a comment below.  Subscribe to my feed

    Read the article

  • Record Screen Activity with CamStudio

    - by Asian Angel
    Sometimes a visual demonstration works much better than a list of instructions. If you need to make a demo video for family and/or friends then you might want to have a look at CamStudio. Using CamStudio To get properly set up you will need to install two different files (the main program followed by the codec). Once that is done you are ready to get started. When you start the program you will see a surprisingly small window. Notice the highlighted Record to text…it serves as a visual indicator for the video type selected for recording. Before you start creating a video it would be a good idea to look through some of the settings. The first one to look at is the region or area that you want to record. Next you will want to look through the video options since these will affect the quality and final size of your video files. The default setting for quality is 70…adjust that to the level that best suits your needs. Note: For our example we maxed out the various video settings for best quality. On our system Microsoft Video 1 was listed as the default compressor but as you can see there were other options available. You can configure the settings for the compressor you want to use if desired. Keep in mind that each compressor will have unique settings of their own, so if you change it, be certain to go back and check. We decided to use the CamStudio Lossless Codec for our example (it gave the best results while trying the software). Going back to the main window you can toggle back and forth between .avi and .swf output using the last button. Once you are satisfied with the settings click on the red record button to start. If you need to pause while recording or stop recording click on the system tray icon and select the appropriate command. When you are finished recording, you will be presented with the save file window. Browse for the desired save location and name your new file. Once you have saved the file the movie player window will automatically open so that you view your new video. Our sample video shown here is at 50% of original size so may look slightly “gritty”. The detail was much better at 100%. If you decide to record and save as .swf the process will be identical to recording in .avi format until the movie player window opens. At that time the conversion process from .avi to .swf will begin. When complete you will have a new flash video and html file that goes with it. Depending on which browser you have set as default, you may run into a small problem when the preview for your new .swf file tries to open. There is a small bug in the generated html file. You can use this work-around or… Just open the .swf file directly in your favorite browser. Conclusion CamStudio may not produce the highest quality videos, but it’s free and does a very nice job nonetheless. If you are working on a tight budget or only need to make an occasional video then CamStudio is a very sensible choice. Links Download CamStudio Stable Version & CamStudio Codec *Download links are approximately half-way down the page. Download CamStudio Stable Version & CamStudio Codec at SourceForge *Beta version also available here. Similar Articles Productive Geek Tips Get the Classic Style Network Activity Indicator Back in Windows 7How To Copy a DVD with VLC 1.0ALLCapture 3.0 [Review]Listen and Record Over 12,000 Online Radio Stations with RadioSureGeek Reviews: Play And Record Internet Radio With Screamer Radio TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate

    Read the article

  • NDepend 4 – First Steps

    - by Ricardo Peres
    Introduction Thanks to Patrick Smacchia I had the chance to test NDepend 4. I can only say: awesome! This will be the first of a series of posts on NDepend, where I will talk about my discoveries. Keep in mind that I am just starting to use it, so more experienced users may find these too basic, I just hope I don’t say anything foolish! I must say that I am in no way affiliated with NDepend and I never actually met Patrick. Installation No installation program – a curious decision, I’m not against it -, just unzip the files to a folder and run the executable. It will optionally register itself with Visual Studio 2008, 2010 and 11 as well as RedGate’s Reflector; also, it automatically looks for updates. NDepend can either be used as a stand-alone program (with or without a GUI) or from within Visual Studio or Reflector. Getting Started One thing that really pleases me is the Getting Started section of the stand-alone, with links to pages on NDepend’s web site, featuring detailed explanations, which usually include screenshots and small videos (<5 minutes). There’s also an How do I with hierarchical navigation that guides us to through the major features so that we can easily find what we want. Usage There are two basic ways to use NDepend: Analyze .NET solutions, projects or assemblies; Compare two versions of the same assembly. I have so far not used NDepend to compare assemblies, so I will first talk about the first option. After selecting a solution and some of its projects, it generates a single HTML page with an highly detailed report of the analysis it produced. This includes some metrics such as number of lines of code, IL instructions, comments, types, methods and properties, the calculation of the cyclomatic complexity, coupling and lots of others indicators, typically grouped by type, namespace and assembly. The HTML also includes some nice diagrams depicting assembly dependencies, type and method relative proportions (according to the number of IL instructions, I guess) and assembly analysis relating to abstractness and stability. Useful, I would say. Then there’s the rules; NDepend tests the target assemblies against a set of more than 120 rules, grouped in categories Code Quality, Object Oriented Design, Design, Architecture and Layering, Dead Code, Visibility, Naming Conventions, Source Files Organization and .NET Framework Usage. The full list can be configured on the application, and an explanation of each rule can be found on the web site. Rules can be validated, violated and violated in a critical manner, and the HTML will contain the violated rules, their queries – more on this later - and results. The HTML uses some nice JavaScript effects, which allow paging and sorting of tables, so its nice to use. Similar to the rules, there are some queries that display results for a number (about 200) questions grouped as Object Oriented Design, API Breaking Changes (for assembly version comparison), Code Diff Summary (also for version comparison) and Dead Code. The difference between queries and rules is that queries are not classified as passes, violated or critically violated, just present results. The queries and rules are expressed through CQLinq, which is a very powerful LINQ derivative specific to code analysis. All of the included rules and queries can be enabled or disabled and new ones can be added, with intellisense to help. Besides the HTML report file, the NDepend application can be used to explore all analysis results, compare different versions of analysis reports and to run custom queries. Comparison to Other Analysis Tools Unlike StyleCop, NDepend only works with assemblies, not source code, so you can’t expect it to be able to enforce brackets placement, for example. It is more similar to FxCop, but you don’t have the option to analyze at the IL level, that is, other that the number of IL instructions and the complexity. What’s Next In the next days I’ll continue my exploration with a real-life test case. References The NDepend web site is http://www.ndepend.com/. Patrick keeps an updated blog on http://codebetter.com/patricksmacchia/ and he regularly monitors StackOverflow for questions tagged NDepend, which you can find on http://stackoverflow.com/questions/tagged/ndepend. The default list of CQLinq rules, queries and statistics can be found at http://www.ndepend.com/DefaultRules/webframe.html. The syntax itself is described at http://www.ndepend.com/Doc_CQLinq_Syntax.aspx and its features at http://www.ndepend.com/Doc_CQLinq_Features.aspx.

    Read the article

  • Backup Your Windows Home Server Off-Site with Asus Webstorage

    - by Mysticgeek
    Windows Home Server lets you backup machines on your network easily. But what about backing up the server data? Today we take a look at ASUS WebStorage for Windows Home Server, which provides you with secure off-site backup for WHS. To use the ASUS WebStorage service you’ll need to sign up for a free account. It offers 1GB of free storage, then you can purchase an unlimited backup package for $39.99 for a year subscription. Note: They also offer online storage for individual PCs as well. Install ASUS WebStorage for WHS Browse to your shared folders on the server and open the Add-Ins folder and copy over the WHSConnectorSetup2.2.4.088.msi file (link below) then close out of the folder. Now launch Windows Home Server Console from one of the computers on your network, click Settings, then Add-ins. Under Available Add-ins click the Available tab and you’ll see the Asus WebStorage installer file we just copied over. Click the Install button. Installation kicks off and when it’s complete, you’ll need to close out of the console and reconnect. Using ASUS WebStorage WHS Connector  When you reconnect to WHS Console, scroll over to the ASUS WebStorage icon and click on Settings. Now log into your ASUS account… Now select the folders you want to backup to the WebStorage service. Select the radio button next to Enable to initialize the backup process… The backup process begins. You can change which folders are backed up simply by disabling the backup process, uncheck the folder(s), then enable the backup again. ASUS WebStorage Site After you have files backed up to the ASUS site, log into your account, and your presented with an overview of the amount of storage you’re using. It also shows what type of files are taking certain amounts of space.   You can browse through your backed up files and folders. It allows you to share and sync backed up data as well. Navigate to the file you want and you can easily download it by clicking on it, or share it out by clicking the share link below it. If you choose to share it, you’re provided with a link to the file to send out to other users.   Conclusion Users of Windows Home Server have been looking for an inexpensive cloud backup solution for quite some time. There are services such as JungleDisk, KeepVault, Wuala…etc. These services probably do a better job, but can start getting expensive once you start uploading a GBs of data. Another disappointment of ASUS WebStorage is you can only backup your WHS shares (from what we’ve been able to determine), it’s an “all or nothing” type of thing. You cannot go in and select individual files and folders. The initial upload speeds can be a bit slow as well, although that might have something to do with limited upload speeds on the DSL connection we used to test it. Retrieving your data from the ASUS site is a breeze though, and all the data files are organized quite well. The WHS Addin is very easy to install and use. If you’re looking for an off-site solution to backup your WHS data, you can test out ASUS WebStorage for free with a 1GB limit. This is good for testing the service and it might be exactly what you’re looking for. Other users may want a more advanced solution like KeepVault or CloudBerry…which is a front end for Amazon S3 storage. Download ASUS WebStorage WHS Addin Other WHS Offsite Backup Solutions CloudBerry, JungleDisk, KeepVault, Wuala Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscRemove a Network Computer from Windows Home ServerShare Ubuntu Home Directories using Samba TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

    Read the article

  • Announcing the New Windows Azure Web Sites Shared Scaling Tier

    - by Clint Edmonson
    Windows Azure Web Sites has added a new pricing tier that will solve the #1 blocker for the web development community. The shared tier now supports custom domain names mapped to shared-instance web sites. This post will outline the plan changes and elaborate on how the new pricing model makes Windows Azure Web Sites an even richer option for web development shops of all sizes. Free Shared Reserved # of Sites 10 100 100 Egress 165MB/Day 5GB/Month Included 5GB/Month Included Storage 1GB 1GB 10GB Throttling CPU/Memory/Egress CPU/Memory Unlimited Price Free $.02/hr per site, per instance $.08/hr per core Setting the Stage In June, we released the first public preview of Windows Azure Web Sites, which gave web developers a great platform on which to get web sites running using their web development framework of choice. PHP, Node.js, classic ASP, and ASP.NET developers can all utilize the Windows Azure platform to create and launch their web sites. Likewise, these developers have a series of data storage options using Windows Azure SQL Databases, MySQL, or Windows Azure Storage. The Windows Azure Web Sites free offer enabled startups to get their site up and running on Windows Azure with a minimal investment, and with multiple deployment and continuous integration features such as Git, Team Foundation Services, FTP, and Web Deploy.  The response to the Windows Azure Web Sites offer has been overwhelmingly positive. Since the addition of the service on June 12th, tens of thousands of web sites have been deployed to Windows Azure and the volume of adoption is increasing every week. Preview Feedback In spite of the growth and success of the product, the community has had questions about features lacking in the free preview offer. The main question web developers asked regarding Windows Azure Web Sites relates to the lack of the free offer’s support for domain name mapping. During the preview launch period, customer feedback made it obvious that the lack of domain name mapping support was an area of concern. We’re happy to announce that this #1 request has been delivered as a feature of the new shared plan. New Shared Tier Portal Features In the screen shot below, the “Scale” tab in the portal shows the new tiers – Free, Shared, and Reserved – and gives the user the ability to quickly move any of their free web sites into the shared tier. With a single mouse-click, the user can move their site into the shared tier. Once a site has been moved into the shared tier, a new Manage Domains button appears in the bottom action bar of the Windows Azure Portal giving site owners the ability to manage their domain names for a shared site. This button brings up the domain-management dialog, which can be used to enter in a specific domain name that will be mapped to the Windows Azure Web Site. Shared Tier Benefits Startups and large web agencies will both benefit from this plan change. Here are a few examples of scenarios which fit the new pricing model: Startups no longer have to select the reserved plan to map domain names to their sites. Instead, they can use the free option to develop their sites and choose on a site-by-site basis which sites they elect to move into the shared plan, paying only for the sites that are finished and ready to be domain-mapped Agencies who manage dozens of sites will realize a lower cost of ownership over the long term by moving their sites into reserved mode. Once multi-site companies reach a certain price point in the shared tier, it is much more cost-effective to move sites to a reserved tier.  Long-term, it’s easy to see how the new Windows Azure Web Sites shared pricing tier makes Windows Azure Web Sites it a great choice for both startups and agency customers, as it enables rapid growth and upgrades while keeping the cost to a minimum. Large agencies will be able to have all of their sites in their own instances, and startups will have the capability to scale up to multiple-shared instances for minimal cost and eventually move to reserved instances without worrying about the need to incur continually additional costs. Customers can feel confident they have the power of the Microsoft Windows Azure brand and our world-class support, at prices competitive in the market. Plus, in addition to realizing the cost savings, they’ll have the whole family of Windows Azure features available. Continuous Deployment from GitHub and CodePlex Along with this new announcement are two other exciting new features. I’m proud to announce that web developers can now publish their web sites directly from CodePlex or GitHub.com repositories. Once connections are established between these services and your web sites, Windows Azure will automatically be notified every time a check-in occurs. This will then trigger Windows Azure to pull the source and compile/deploy the new version of your app to your web site automatically. Walk-through videos on how to perform these functions are below: Publishing to an Azure Web Site from CodePlex Publishing to an Azure Web Site from GitHub.com These changes, as well as the enhancements to the reserved plan model, make Windows Azure Web Sites a truly competitive hosting option. It’s never been easier or cheaper for a web developer to get up and running. Check out the free Windows Azure web site offering and see for yourself. Stay tuned to my twitter feed for Windows Azure announcements, updates, and links: @clinted

    Read the article

  • Microsoft TechEd 2010 - Day 2 @ Bangalore

    - by sathya
    Microsoft TechEd 2010 - Day 2 @ Bangalore Today is the day 2 @ Microsoft TechEd 2010. We had lot of technical sessions as usual there were many tracks going on side by side and I was attending the Web simplified track, Which comprised of the following sessions :   Developing a scalable Media Application using ASP.NET MVC - This was a kind of little advanced stuff. Anyways I couldn't understand much because this was not my piece of cake and I havent worked on this before ASP.Net MVC Unplugged - This was really great because this session covered from the basics of MVC showing what is Model,View and Controller and how it worked and the speaker went into the details of the same. Building RESTful Applications with the Open Data Protocol - There were some concepts explained about this from the basics on how to build RESTful Services and it went on till some advanced configurations of the same. Developing Scalable Web Applications with AppFabric Caching - This session showed about the integration of AppFabric with the .Net Web Applications. Instead of using Inproc Sessions, we can use this AppFabric as a substitute for Caching and outofProc Session Storage without writing code and doing a little bit of configurations which brings in High Scalability, performance to our applications. (But unfortunately there were no demos for this session ) Deep Dive : WCF RIA Services - This session was also an interactive one, in this the speaker presented from the basics of WCF and took a Book Store Application as a sample and explained all details concepts on linking with RIA Services   Apart from these sessions, in between there happened some small events in the breaks like Some discussions about Technology, Innovations Music Jokes Mimicry, etc. And on doing all these things, the developers were given some kool gifts / goodies like USBs, T-Shirts, etc. And today I got a chance to do the following certification : (70-562) Microsoft Certified Technology Specialist in .NET 3.5 Web Applications Since I already have an MCTS in .NET 2.0, I wanted to do an MCPD and for doing the same I was required to do an update to my MCTS with the .NET 3.5 framework and I did the same I cleared it and now am an MCTS in .NET 3.5 Web Apps And on doing this I got a T-Shirt and they gave something called Learning $ of worth 30$. And in various stalls for attending each quiz or some game or some referrals we got some Learning $ which we can redeem later based on our Total Learning $. I got 105 $ which i was able to redeem and got a Microsoft Learning BagPack, 1 free Microsoft certification offer, a laptop light and an e-learning content activated. And after all these sessions and small events, we had something called Demo Extravaganza like I mentioned yesterday. This was a great funfilled event with lot of goodies for the attendees. There were some lucky draw which enabled 2 attendees to get Netbooks (Sponsored by Intel) and 1 attendee to get X-box (Sponsored by Citrix). After Choosing the raffle in the lucky draw they kept it on a device called Microsoft Surface which is a kind of big touch screen device and on putting the raffle on that it detected the code of the attendee and said intelligently how many sessions that person has attended and if he has attended more than 5 he got a Netbook and this was coded by a guy called Imran. Apart from they showed demos on : Research by 2 Tamilnadu students from Krishna Arts and Science college, taken 1200 photographs of their college from different angles and put that up in Bing maps using silverlight and linked with Photosynth, which showed a 3d view of their college based on the photos they uploaded Reasearch by Microsoft on Panaramic HD views of the images. One young guy from Microsoft Research showed a demo of this on Srivilliputhur Andal Temple, in Tamil Nadu and its history with a panoramic view of the temple and the near by places with narration of the historical information on the same and with the videos embedded in it with high definition images which we can zoom to a very detailed level. Some Demo on a business app with Silverlight, Business Intelligence (BI) and maps integrated. It showed the sales of a particular product across locations. Some kool demos by 2 geeks who used Robots to show their development talents. 2 Robots fought with each other 2 Robots danced in sync for the A.R. Rehman song Humma Humma... A dream home project by Raman. He is currently using the same in his home too. Robots are controlling his home currently. They showed a video on this. Here are the list of activities that Robot does for him When he reads a book, robot automatically scans that and shows that image of that person in the screen (TV or comp) in front of him. It shows a wikipedia about that person. It says that person is not in linked in. do you want to add him If he sees an IPL Match news in the book and smiles it understands he is interested in that and opens a website related to that and shows the current game and the scorecard. It cooks for him It cleans the room for him whenever he leaves the house when he is doing something if some intruder comes inside his house his computer automatically switches his screen showing the video of the person coming inside. When he wakes up it automatically opens up the system, loads his mails and the news by the side, etc. Some Demos on Microsoft Pivot. This was there in livelabs but it is now available in getpivot.com its a pivoting of the pictorial data based on some categories and filters on the searches that we do. And finally on filling up some feedback forms we got T-Shirts and Microsoft Visual Studio 2010 Training Kit CDs. Whats more on TechEd??? Stay tuned!!! Will update you soon on the other happenings!! PS : I typed a lot of content for more than a hour but I pressed a backspace and it went to the previous page and all my content were lost and I was not able to retrieve the same and I typed everything again.

    Read the article

  • Silverlight Cream for December 18, 2010 -- #1012

    - by Dave Campbell
    In this Issue: Mark Monster, Kevin Dockx, Jeremy Likness(-2-,-3-), Timmy Kokke, Den Delimarsky, Mike Snow, Samuel Jack(-2-), and Renuka Prasad(-2-). Above the Fold: Silverlight: "Trigger a Storyboard on ViewModel changes" Mark Monster WP7: "Microsoft Push Notification in Windows Phone 7" Renuka Prasad Shoutouts: SilverlightGal sent me the link to The Silverlight Dossier ... I think it's a pretty good start... additions I'd like to see are ways to submit to the various areas. Michael Crump put up a contest that runs from now to January 1st... Win a set of Infragistics Silverlight Controls with Data Visualization!... pretty cool, Michael! If you visit WynApse.com, you'll see I have a subscription to LearnVisualStudio.net... and now they have posted a batch of WP7 videos... 64 of them to be exact... wow!: New video series From SilverlightCream.com: Trigger a Storyboard on ViewModel changes Mark Monster has a great post up about triggering Storyboard on ViewModel changes using the DataTrigger from Blend... cool stuff, and you can also do GoToStateAction or other actions or build yourowndang Trigger Action... fun awaits! ... sorry it took a while to post, Mark... been a tad overloaded here! Working with the Silverlight Rich Text Box control Kevin Dockx has had a post up for a while at SilverlightShow where he takes a good look at the RichText control and it's various capabilities, including source so you can give it a dance yourself. Lessons Learned in Personal Web Page Part 3: Custom Panel and Listbox Jeremy Likness's part 3 of his Personal Web Page lessons learned is covering the tres-cool 3D Panel he did... and he's got it all explained out... building from scratch via a custom panel and a Listbox control... A Silverlight MVVM Feed Reader from Scratch in 30 Minutes Jeremy Likness has a video tutorial showing building an MVVM/Silverlight feedreader in 30 minutes ... plus a couple mods that he noticed after the fact... beat that HTML5 :) Jounce Part 8: Raising Property Changed In Jeremy Likness's latest post, he has number 8 in his series on his MVVM platform, Jounce. This time he's explaining the property changed notification, has a very cool way of doing it, and some interesting comments from readers. Dependency Injection, MVVM, Ninject and Silverlight Timmy Kokke has a great tutorial up with associated demo project on Dependency Injection in MVVM and Silverlight. Some hidden features in the Windows Phone 7 emulator Den Delimarsky shows how to get some of the hidden features on your WP7 emulator like the Call History, Call Settings, and Details about the numbers. Playing sound effects on Windows Phone 7 Mike Snow's latest tip is playing sound effects on your WP7 ... a little bit of XNA here and there, and badabing, badaboom, you got sound! Day 3 of my “Build a Windows Phone 7 game in 3 days” Challenge Samuel Jack has a couple more posts up about his 'Build a WP7 game in 3 Days' challenge... first up is Day 3 from 8:50 to 22:30 ... wow... long day! ... but he's got something good going now... some good external links also Day 3.5 of my “Build a Windows Phone 7 game in 3 days” Challenge Samuel Jack's 3rd day ended with another half-day added on to put on some finishing touches... again, some good external links... and he finished with this Say hello to Simon Squared, my 3.5 day old WP7 Game Microsoft Push Notification in Windows Phone 7 Renuka Prasad has a bunch of material up that I've not been aware of (how did that happen, people??) ... here's the first of a couple of his posts on Code Project ... a very nice tutorial on the Push Notification process... great diagrams and external links. Windows Phone 7 – Toast Notification Using Windows Azure Cloud Service Renuka Prasad has another WP7 post on CodeProject... this one on Toast Notification... and he's using Azure and WCF all rolled into it as well... great diagrams, descriptions and all the code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • A little primer on using TFS with a small team

    - by johndoucette
    The scenario; A small team of 3 developers mostly in maintenance mode with traditional ASP.net, classic ASP, .Net integration services and utilities with the company’s third party packages, and a bunch of java-based Coldfusion web applications all under Visual Source Safe (VSS). They are about to embark on a huge SharePoint 2010 new construction project and wanted to use subversion instead VSS. TFS was a foreign word and smelled of “high cost” and of an “over complicated process”. Since they had no preconditions about the old TFS versions (‘05 & ‘08), it was fun explaining how simple it was to install a TFS server and get the ball rolling, with or without all the heavy stuff one sometimes associates with such a huge and powerful application management lifecycle product. So, how does a small team begin using TFS? 1. Start by using source control and migrate current VSS source trees into TFS. You can take the latest version or migrate the entire version history. It’s up to you on whether you want a clean start or need quick access to all the version notes and history of the bits. 2. Since most shops are mainly in maintenance mode with existing applications, begin using bug workitems for everything. When you receive an issue/bug from your current tracking system, manually enter the workitem in TFS right through Visual Studio. You can automate the integration to the current tracking system later or replace it entirely. Believe me, this thing is powerful and can handle even the largest of help desks. 3. With new construction, begin work with requirements and task workitems and follow the traditional sprint-based development lifecycle. Obviously, some minor training will be needed, but don’t fear, this is very intuitive and MSDN has a ton of lesson based labs and videos. 4. For the java developers, use the new Team Explorer Everywhere 2010 plugin (recently known as Teamprise). There is a seamless interface in Eclipse, but also a good command-line utility for other environments such as Dreamweaver. 5. Wait to fully integrate the whole workitem/project management/testing process until your team is familiar with the integrated workitems for bugs and code. After a while, you will see the team wanting more transparency into the work they are all doing and naturally, everyone will want workitems to help them organize the chaos! 6. Management will be limited in the value of the reports until you have a fully blown implementation of project planning, construction, build, deployment and testing. However, there are some basic “bug rate” reports and current backlog listings that can provide good information. Some notable explanations of TFS; Work Item Tracking and Project Management - A workitem represents the unit of work within the system which enables tracking of all activities produced by a user, whether it is a developer, business user, project manager or tester. The properties of a workitem such as linked changesets (checked-in code), who updated the data and when, the states and reasons for change, are all transitioned to a data warehouse within TFS for reporting purposes. A workitem can be defines as a "bug", "requirement", test case", or a "change request". They drive the work effort by the individual assigned to it and also provide a key role in defining what needs to be done. Workitems are the things the team needs to do to accomplish a goal. Test Case Management - Starting with a workitem known as a "test case", a tester (or developer) can now author and manage test cases within a formal test plan subsystem. Although TFS supports the test case workitem type, there is a new product known as the VS Test Professional 2010 which allows a tester to facilitate manual tests including fast forwarding steps in the process to arrive at the assertion point quickly. This repeatable process provides quick regression tests and can be conducted by the business user to ensure completeness during UAT. In addition, developers no longer can provide a response to a bug with the line "cannot reproduce". With every test run, attachments including the recorded session, captured environment configurations and settings, screen shots, intellitrace (debugging history), and in some cases if the lab manager is being used, a snapshot of the tested environment is available. Version Control - A modern system allowing shared check-in/check-out, excellent merge conflict resolution, Shelvesets (personal check-ins), branching/merging visualization, public workspaces, gated check-ins, security hierarchy capabilities, and changeset/workitem tracking. Knowing what was done with the code by any developer has become much easier to picture and resolve issues. Team Build - Automate the compilation process whether you need it to be whenever a developer checks-in code, periodically such as nightly builds for testers in the morning, or manual builds to be deployed into production. Each build can run through pre-determined tests, perform code analysis to see if the developer conforms to the team standards, and reject the build if either fails. Project Portal & Reporting - Provide management with a dashboard with insight into the project(s). "Where are we" in each step of the way including past iterations and the current burndown rate. Enabling this feature is easy as it seamlessly interfaces with existing SharePoint implementations.

    Read the article

  • Enable DreamScene in Any Version of Vista or Windows 7

    - by DigitalGeekery
    Windows DreamScene was a utility available for Vista Ultimate that allowed users to set video as desktop wallpaper. It was dropped in Windows 7, but we’ll take a look at how to play DreamScenes in all versions of Windows 7 or Vista. Downloading DreamScenes First, you’ll need to find some DreamScenes to download. We’ve found some nice ones at both DreamScene.org and DeviantArt. You can find those download links at the end of the article. They’ll come as compressed files, so you’ll need to extract them after downloading. Windows 7 DreamScene Activator If you are running Windows 7 you can use Windows 7 DreamScene Activator. This free portable utility enables DreamScene in both 32 & 64 bit versions of Windows 7. Users can then set either MPG or WMV files as desktop wallpaper. Download and extract the Windows 7 DreamScene Activator (link below). Once extracted, you’ll need to run the application as administrator. Right-click on the .exe and select Run as administrator. Click on Enable DreamScene. This will also restart Windows Explorer if it is open. To play your DreamScene, browse for the file in Windows Explorer, right-click the file and select Set as Desktop Background. Enjoy your new Windows 7 DreamScene.   Although it says it is for Windows 7 only, we were able to get it to work with no problems on Vista Home Premium x32 as well.   You can Pause the DreamScene at anytime by right-clicking on the desktop and selecting Pause DreamScene.   When you are ready for a change, click Disable DreamScene and switch back to your previous wallpaper. Using VLC Media Player Users of all versions of Windows 7 & Vista can enable a DreamScene using VLC. Recently, we showed you how to set a video as your desktop wallpaper in VLC.  Since DreamScenes are in MPEG or WMV format, we will use the same tactic to display them as desktop wallpaper. We’ll just need to make a few additional tweaks to the VLC settings. You’ll need to download and install VLC media player if you don’t already have it. You can find the download link below. Next, select Tools > Preferences from the Menu. Select the Video button on the left and then choose DirectX video output from the Output dropdown list. Next, select All under Show Settings at the lower left, then select the Video button on the left pane. Uncheck Show media title on video. This will prevent VLC from constantly showing the title of the video on the screen each time the video loops. Click Save and the restart VLC.   Now we will add the video to our playlist and set it to continuously loop. Select View > Playlist from the Menu. Select the Add file button from the bottom of the Playlist window and select Add file.   Browse for your file and click Open.   Click the Loop button at the bottom so the video plays in a continuous loop.   Now, we’re ready to play the video. After the video starts playing, select Video > DirectX Wallpaper from the Menu, then minimize VLC.   If you’re using Aero Themes, you may get a pop-up warning and Windows will switch automatically to a basic theme.   If looping one video gets to be a little repetitive, you can add multiple videos to your playlist in VLC and loop the entire playlist. Just make sure you toggle the Loop button on the playlist window to Loop All. Now you’ve got a nice DreamScene playing on your desktop. Another cool trick you can do with VLC is take snapshots of favorite movie scenes and set them as backgrounds. When you’re ready to go back to your old wallpaper, maximize VLC, select Video and click DirectX Wallpaper again to turn it off the video background. Occasionally we were left with a black screen and had to manually change our wallpaper back to normal even after turning off the DirectX Wallpaper. Note: Keep in mind that using the VLC method takes up a lot of resources so if you try to run it on older hardware, or say a netbook, you’re not going to get good results. We also tried to use the VLC method in XP, but couldn’t get it to work. If you have leave a comment and let us know. While the DreamScene feature never really caught on in Vista, we find them to be a cool way to pump a little life into your desktop on any version of Vista or Windows 7. Downloads DreamScenes from Dreamscene.org DreamScenes from DeviantArt Download VLC media player Windows 7 DreamScene Activator Similar Articles Productive Geek Tips Wait, How do I Turn on DreamScene Again?Enable Run Command on Windows 7 or Vista Start MenuEnable or Disable UAC From the Windows 7 / Vista Command LineUnderstanding Windows Vista Aero Glass RequirementsEnable Mapping to \HostnameC$ Share on Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace

    Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >