Search Results

Search found 6288 results on 252 pages for 'credit card'.

Page 115/252 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

• My Linux desktop sees my HDMI-connected monitor, but my monitor says "No signal"

  - by hrunting

  I have a Gigabyte H55M-UD2H motherboard and an Acer S271HL monitor. When I connect the monitor to the motherboard via VGA, signal works perfectly. When I connect the monitor via HDMI, the system "sees" the connection, but the monitor receives no signal (the monitor shows a blue box which reads "No Signal" and then the monitor goes into power-saving state). Some fun facts about this: if I hook a different monitor to this box via HDMI, the monitor receives the output without issue (same computer/motherboard, same cable, different monitor) if I connect a different computer to the monitor via HDMI, the monitor receives the output without issue (different computer, same cable, same monitor) no signal is received whether in the OS or in the BIOS there are no BIOS options for controlling video output other than for selection of onboard vs. PCI/PCI-E-based video card (the system has no dedicated video card installed) The box is running Linux, so I have the output of xrandr which shows the connection and the monitor modes detected via DDC: ~$ xrandr --prop Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm EDID: 00ffffffffffff000472ca028d128022 1c160103803c2278ca7b45a4554aa227 0b5054bfef80714f8140818081c08100 9500b300d1c0023a801871382d40582c 450056502100001e000000fd00384c1f 5311000a202020202020000000fc0053 323731484c0a202020202020000000ff 004c55573044303130383531300a01e5 020324f14f0102030405060790111213 1415161f230907078301000067030c00 1000382d023a801871382d40582c4500 56502100001f011d8018711c1620582c 250056502100009f011d007251d01e20 6e28550056502100001e8c0ad08a20e0 2d10103e960056502100001800000000 000000000000000000000000000000de Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 HDMI3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on How do I get this monitor to recognize the output from this HDMI socket?

  Read the article

• None of usb-controllers are working after a crash

  - by Cray

  So I have a GA-p35-DS4 mboard with a Q6600, running windows7-x64. After a random crash with a bluescreen (not caused by anything particular as I recall), none of the usb-controllers are working. (And none of the devices connected to those usb ports). All the controllers are showed up in the device manager, but every one has a warning-icon (as they are not functioning properly). The windows identifies them correctly, it shows exactly the model of each controller, and it says that the driver is installed. Now, when I try to reinstall the driver (Update driver menu item in the device manager), it tries to find it, finds the driver, but quits saying that the driver was found but could not be installed. Additionally, it displays "This operation requires an interactive window station", whatever that means... Now get this, the same thing happens with a new pci-usb controller card! It is found (actually each time the machine starts, it is found as new hardware), but trying to install drivers leads nowhere, I am getting the same message about an interactive window station. (tried to install drivers from the acoompanying CD) I have tried deleting those devices from device manager and let windows find them again, but that leads to same results. None of the ports on this extension card work either. This should not be a hardware problem, a usb keyboard connected to the builtin usb controller works in bios, and even in another OS running the same computer (old xp installation) What to do? Will I have to reinstall? Can deleting infcache.1 help? Is there some way to let windows remove all old drivers and try to find all hardware again, this time only looking for drivers on a windows install disk or something?

  Read the article

• Android failure to boot on LG [migrated]

  - by Ukavi

  I need to recover data from my AT&T LG Thrill Android Phone Background: My AT&T LG Thrill phone's battery died a couple of days ago because I forgot to charge it. When I charged the phone and tried to turn it on, it showed the LG logo followed by the dropping balls and the AT&T "Rethink Possible" screen. I then get a mesage that the Application Google Services Framework has crashed and the phone goes into a loop with the dropping balls showing again followed by "Rethink Possible" screen. This sequence repeats itself over and over and the phone does not get out of this loop. I have been able to go into the recovery screen (both Safe Mode and the Android Recovery Service) and have cleared cache, etc. However, I DO NOT want to wipe user data and restore to factory settings as this will wipe all of my data (pictures, application data, etc). Solution Needed: I need a suggestion to a way of accessing my data so that I can back it up onto an SD card/computer. I DO NOT want to root the phone as this may void the warranty. What I'm looking for is a way of perhaps putting the original flash image on the micro SD card and then have the phone read that image. Or some other similar solution that will get the phone out of this loop and allow me to get to the data.

  Read the article

• Converting DisplayPort and/or HDMI to DVI-D?

  - by Jeff Atwood

  Newer Radeon video cards come with four ports standard: DVI (x2) HDMI DisplayPort If I want to run three 24" monitors, all of which are DVI only, from this video card -- is it possible to convert either the HDMI or DisplayPort to DVI? If so, how? And which one is easier/cheaper to convert? I did a little research and it looks like there isn't a simple "dongle" method. I found this DisplayPort to DVI-D Dual Link Adapter but it's $120; almost cheaper to buy a new monitor that supports HDMI or DisplayPort inputs at that point! There's also a HDMI to DVI-D adapter at Monoprice but I'm not sure it will work, either. AnandTech seems to imply that you do need the DisplayPort-to-DVI: The only catch to this specific port layout is that the card still only has enough TMDS transmitters for two ports. So you can use 2x DVI or 1x DVI + HDMI, but not 2x DVI + HDMI. For 3 DVI-derived ports, you will need an active DisplayPort-to-DVI adapter.

  Read the article

• Ubuntu: how to get audio to work in both Spotify (under Wine) and Flash (in Firefox)?

  - by Jonik

  I'm running Spotify on Linux using Wine. Sound worked great (even though the sound test in winecfg failed!), until I installed alsa-oss package yesterday to get Flash sound working in Firefox. Now Spotify says: "There is a problem with your sound card. Spotify can't play music." So the question is, how to get the sound in Spotify working again, so that it also keeps working in Flash & Firefox? Tweak some ALSA settings? Spotify settings? Add/remove some packages? By the way, curiously, now that sound doesn't work in Spotify, winecfg's "Test Sound" does work! This is Ubuntu 8.04 (Hardy). Sound card / driver is probably an integrated AC'97. Please mention if any additional information about the system is needed! Update: I have Flash 10 installed (outside the packaging system, using $MOZ_PLUGIN_PATH env variable), but also had Flash 9 from flashplugin-nonfree package - and the earlier version was being used by Firefox! Based on what Mike Arthur said about Flash and alsa-oss, I removed the older Flash (flashplugin-nonfree package) and alsa-oss - and Flash sound still works, which is nice. But for some reason Spotify still doesn't play sound, even though things should now be like they were originally... Update 2: Got it working, all smoothly, finally.

  Read the article

• Analyze a BSOD (irql_less_than_or_equal)

  - by Bruno Reis

  Hello. About 2 months ago I bought a new system and built it at home: Mother board: XFX X58i Processor: Core i7 920, using the stock cooler Memory: 3x2GB Corsair DDR3 1600 Video card: NVIDIA GTS 250 (1GB) Hard disk: 2x WD 500GB, 7200rpm I have 2 screens plugged into the video card, and the system is connected to a 550W PSU. Nothing is overclocked. After building the system, I stressed it a lot with Prime95 and rthdribl to check its stability. All my tests were perfect. So I reinstalled Win 7 x64 Professional and started using it normally. The first week (2010-03-15) I got the infamous irql_less_than_or_equal BSOD. Ten days after (2010-03-24) I got another one. Then on 2010-04-09, 2010-05-04. Since 2 days ago it became worse: I got one bluescreen per day! (2010-05-12, 2010-05-13, 2010-05-14). I installed BlueScreenView to try to obtain some information, but I'm not able to extract any useful information apart from the bug check string (irql_less_than_or_equal), and that it was caused by ntoskrnl.exe (the first three at ntoskrnl.exe+71f00, the last 4 at ntoskrnl.exe+70600 -- which I suspect could be the same thing, as Microsoft could have patched this file in the mean time, so the address of the function causing it changed). Then I stressed my memory sticks with memtest, they worked perfectly. After booting, I've stressed my GPU with FurMark and RTHDRIBL, everything was fine. Then I stressed the CPU with 4 instances of Prime95 while monitoring the temperature -- that never exceeded 85oC with the case closed --, everything fine. Finally I've stressed the whole system with HeavyLoad for a looooong time, everything worked just fine. So, I have stressed most of the components of the system, but couldn't get any useful information from it. Do you have any hint on what else can I do to find the culprit? Thanks Bruno

  Read the article

• IP address from a MAC address

  - by acermate433s

  I'm writing a class to integrate a POS card reader device to our software. In order for it to work I must know what IP it's using. We were given some sample code by the service provider and the way they do this is they open a website (http://www.ebizchargeemv.com/getip.php?mac={MAC address of device}) and it would return the IP address of the device. The device I'm using is a POSLynx220 Mini. It has an ethernet port that connects to the internet to communicate with the service provider. I send TCP data to it and the device then controls a PIN pad that prompts a client to swipe his card. It's probably a mini computer that communicates with the service provider and uses the PIN pad as its input device. Just being curious but how did they implement this? Are they implementing it using ARP? I'm planning on not using their website to determine the IP of the device. I've seen some code that uses ARP but using executing ARP in one of the PC didn't detect the POS device.

  Read the article

• Acer recovering windows vista

  - by Charlie Pigarelli

  My computer history is very long even of my computer has 4 years of life. An year ago I installed Windows 7 on this acer m1610 that had Vista before. My technic left me 2 recovery disc for "acer vista" before updating it to Windows 7. Then the computer had some trouble. The graphic card broke and we decided to use another computer. Yesterday I had the great idea to fuse the two computer to have a better one... So I moved the graphic card of the latter computer to the acer and everything gone well. Then the trouble of speed, it had before, come back. So I decided to reinstall the very first Windows: Vista back again. I booted the computer with those 2 DVD-R my technic left me and at the end of the process it asked me to insert "the backup cd number one or the system disk". I found 2 original Acer "Blank Recovery Disc" DVD-R and tried with those: rejected. Tried with empty DVD-+R: rejected. I tried with CDs: rejected. I don't have any system disc with me. Except for those 2 DVD-R my technic left me. What am I supposed to do now? I even tried with these fantomatic alt+f9/f10 that should start the recovery without any disc... But nothing happened. PS: the installation cannot complete if I do not insert the right disk. (The recovery disc uses Acer eRecovery Management as recovery software.

  Read the article

• Windows Home Server installation fails because it can't find the DVD drive anymore

  - by BBlake

  I've got an old Dell Dimension 8300 desktop I decided to convert into a WHS box. I popped in a pair of 1 TB SATA drives, which were recognized fine by the BIOS and the currently installed OS (XP), so I decided to go ahead and install WHS. Near the end of the installation, WHS acts like it can no longer find the DVD drives (either of them, the box has a DVDROM and a DVDRW). The specific error is gives is the "Can't configure storage" error. I've found several forums where people say they get this error if they remove the boot DVD during the installation (at the time of the first reboot). However, I never removed the DVD. After the error, if fails into WHS, so it did mostly install and I can work with WHS. However, it refuses to recognize the network card, video card and while it shows the two DVD drives, any CD/DVD I insert in either drive the system says is corrupted and unreadable, even though none of them are. I've tried several reinstalls both removing and not removing the DVD, but the result is the same regardless. Any other tricks anyone found? If I can't figure this out, maybe I'll just install SBS2008 and fake it up to be similar to WHS with some addin tools. Shouldn't be too hard to create something since WHS is based on SBS2003 anyway.

  Read the article

• how does a computer know which IP address will route information to the internet? [closed]

  - by JohnMerlino

  Possible Duplicate: How does IPv4 Subnetting Work? For example, I have a computer with a Network Inteface Card (NIC) which is an Ethernet card that is connected by Ethernet cables to a router. There is also another computer with a cable that is connected in another port of the router. This is a Belkin router operating over an Ethernet in the LAN. When I connect to serverfault.com, it maps to an IP address. My computer now has a task of connecting to that IP address. But my computer itself cannot connect to the serverfault IP address. Only the router can. So the task of my computer is to find the IP address associated with the node that will do the routing to the public internet. How does my computer know that a particular IP address in the local network belongs to the router, and is not another computer connected to the network? Is this information configured manually in the operating system itself? Somehow my computer must know that it must send ethernet frames to the router with the expectation that the router will then send the packet to a public IP. How does it know to send it to the router? Is the router's ip address stored in my computer like a key/value pair e.g. "router"="192.168.2.6", so that when I put a public ip address, my computer first knows to connect to 192.168.2.6?

  Read the article

• IIS 7.5 Siteminder is not protecting ASP.net MVC requests

  - by HariM

  We are trying to use ASP.Net MVC with Siteminder for Single Sign on. This is on Windows Server 2008 R2 with IIS 7.5. Siteminder Agent version 6QMR6. Problem : Siteminder protects physical files that are exist. And it is not protecting the folder when we try to access a non existed file. It must redirect to login page even if the file doesn't exist when the user is accessing a protected folder. How to configure in IIS 7.5 that Do not verify a file exist, before authentication by siteminder. SiteMinderWebAgent is a Handler(WildCard Script Map) we created using the ISAPI6WebAgent.dll How to Protect ASP.Net MVC Request with Siteminder? (Added this as My previous question did not solve the problem). MVC Request shows up in IIS Log but not in Siteminder log. Update : Microsoft Support says currently IIS7.5, even in earlier versions doesnt support wildcard mappings on any two Isapi Handlers with * wild card. Currently in my case Siteminder has * wildcard and asp.net mvc (handler is aspnet_isapi) has * wildcard to handle the reqeusts. Ordered priority doesnt work in the wild card mappings case with Just *. Did not convinced with the answer but will wait till tomorrow for them to get back.

  Read the article

• Surprising corruption and never-ending fsck after resizing a filesystem.

  - by Steve Kemp

  System in question has Debian Lenny installed, running a 2.65.27.38 kernel. System has 16Gb memory, and 8x1Tb drives running behind a 3Ware RAID card. The storage is managed via LVM. Short version: Running a KVM guest which had 1.7Tb storage allocated to it. The guest was reaching a full-disk. So we decided to resize the disk that it was running upon We're pretty familiar with LVM, and KVM, so we figured this would be a painless operation: Stop the KVM guest. Extend the size of the LVM partition: "lvextend -L+500Gb ..." Check the filesystem : "e2fsck -f /dev/mapper/..." Resize the filesystem: "resize2fs /dev/mapper/" Start the guest. The guest booted successfully, and running "df" showed the extra space, however a short time later the system decided to remount the filesystem read-only, without any explicit indication of error. Being paranoid we shut the guest down and ran the filesystem check again, given the new size of the filesystem we expected this to take a while, however it has now been running for 24 hours and there is no indication of how long it will take. Using strace I can see the fsck is "doing stuff", similarly running "vmstat 1" I can see that there are a lot of block input/output operations occurring. So now my question is threefold: Has anybody come across a similar situation? Generally we've done this kind of resize in the past with zero issues. What is the most likely cause? (3Ware card shows the RAID arrays of the backing stores as being A-OK, the host system hasn't rebooted and nothing in dmesg looks important/unusual) Ignoring brtfs + ext3 (not mature enough to trust) should we make our larger partitions in a different filesystem in the future to avoid either this corruption (whatever the cause) or reduce the fsck time? xfs seems like the obvious candidate?

  Read the article

• How can I fix video tearing and pausing on Windows XP Flash videos?

  - by xvs

  I have what should be a reasonably fast PC: it's a Quadcore Intel 6600 at 2.4 GHz, 4MB of RAM, an ATI 3800 series video card and an LG L246WP monitor, which I selected particularly because it was supposed to work well with video and have no trails or other artifacts. So I should be able to play video with no problems. And I can, as long as that video isn't Flash video. With Flash, what I see is tearing, especially during pans, and pausing -- every few seconds the video pauses for about 300ms while the sound stays continuous. I tried going into the video card setup and changing vertical sync, pulldown detection, windows media video acceleration, deinterlacing and triple buffering. but no combination of settings I've tried has changed or corrected the problem in any way. I've also tried enabling and disabling hardware acceleration in the Flash settings, to no avail. This problem happens whether or not the video is streaming or has fully streamed in before playing. So, what can I do? Is this just a flash issue or is there a way to get it to work?

  Read the article

• Reduce power consumption of gaming computer while idle

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 clocked @ 3.3 Ghz 3x DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 oc'd at 800/1600/1850 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) I've already seen this post Reduce power use on computer and this post How do I lower power consumption of my computer and while useful, I'm looking for answers specific to my build and OS. I'm pretty sure this build is a energy-intensive build by default, but I want to try to reduce the amount of energy my build uses when I leave it idle (when I go to bed or go out, etc). The first requirement for this machine is that I need to leave it on, so I cannot turn it off while it's being unused. I run it as a file server for personal reasons and I also leave it on in case people leave me messages on various IM services and chat clients (IRC, MSN, Steam, XFire, Pidgin, etc). I'm also unable to replace the parts in my computer with a cheaper "greener" part. What are some ways to minimize the amount of power the machine uses? I'm already using a high efficiency power supply (80 Plus Gold), but I imagine there's other things that can be done in the BIOS and Windows' power settings to reduce power usage while I'm not using the computer. From what I can tell, I can't use Sleep since that'll disable network access (whole reason why I leave the computer on in the first place). I already turn off my monitor when it's not in use. I enabled Intel SpeedStep within the BIOS (I know, I have a 965 and why am I enabling SpeedStep?) Should I bring the graphics card back to stock speeds and lower the clock on the processor even more? Main reason why I'm asking is I think this computer alone is the reason why my power bill is high, so I want to reduce its consumption to as low as possible without having to shut the thing down.

  Read the article

• Using Toshiba 22EL833 as PC display through HDMI input

  - by Oleg V. Volkov

  I had another Toshiba TV - 19SL738 - connected to this same PC and video card (GTX 8800) through DVI<-HDMI (DVI on PC side, HDMI on TV) before, that was working perfectly at it's native resolution 1360x768. Some time ago I had to change to 22EL833 and immediately faced problem with Windows 7 control panel and NVIDIA control panel both reporting native resolution for new TV as 1080i, 1920x1280, despite TV documentation saying that it have same 1360x768 as previous one. Practical tests confirmed that true native resolution is indeed 1360x768, because plugging in through DVI<-VGA and setting custom resolution through NVIDIA panel shown clear colors and crisp image, while setting anything different with either DVI<-VGA or DVI<-HDMI produced horribly distorted or squished images, with almost unreadable slim lines (as in letters, for example). Now, my problem is that there's no drivers for this TV and I'm unable to get good image while connecting it through DVI<-HDMI directly. The best I've achieved is editing EDID/driver manually, to persuade system that native resolution should be 1360x768, and while image became mostly clear, colors turned to some strange washed out effect, with pools of pure yellow, cyan and magenta there and there filling place of other colors. Gradients also became noticeably stripped as well. Somehow it looks like dithering gone bad and makes me suspect that image is still down/upscaled several times internally somewhere along the line. How can I connect this TV to DVI output of my video card to get best possible clear image, correct colors and correct native resolution?

  Read the article

• Minimum specs needed to run 1080p HD movies?

  - by Wesley

  Hi all, I was wondering how low you could go with hardware that would still be able to smoothly run HD movies. My current plan is around $215 CAD w/o a hard drive: Intel Pentium 4 @ 3.2 GHz - 1GB DDR/SDRAM - 512MB X1600 Pro AGP - 350W PSU - ECS P4VXASD2+ - Bluray/DVD-RW drive. As for the hard drive, could I just get a 7200RPM IDE HDD? Also, I'm planning on installing XP Pro SP3, unless Ubuntu somehow has an advantage. I'm not wanting this to be a media center only computer... just want it to be a normal computer with just enough oomph to play HD movies. Thanks in advance. EDIT1: Forgot to mention that the Bluray/DVD-RW drive is SATA, but I was planning on getting an SATA-IDE adapter or a PCI card with SATA. EDIT2: Oh yes... if I get a PCI card with SATA, would you then recommend I use an SATA hard drive as well? That would leave all the IDE ports on the motherboard unused... is that a good idea?

  Read the article

• VMWare converter performance

  - by bellocarico

  Hello, I have a question about my test lab. It's more to understand the concept more than apply this into production: I have an ESXi with few VMs linux/windows configured and I'd like to use VMWare converter to create backups. To speedup the process I decided to create a Windows VM on the same ESXi host where I've installed Windows 7 and VMWare Converter. The Host has a gigabit card but it's currently connected to a 100Mb FD port. Windows 7 sees a 1gb card connected. When I do the backup using VMWare converter I specify the host IP as source and destination, so I thought the copy could be faster then use my laptop across the network. Well, to cut a long sotry short: I get dreadful performance (4Mb/sec). I'm a buit confused on this because despite the fact that the host is running 100Mb communication between VMs and hosts shouldn't (correct me if I'm wrong) have any limitation instead. I did tweak windows 7 to optimise network performane but I got just a little improvement. i still need 4 hours to back up a 50Gb (thin) VM. Additionally I wanted to ask: Would jumbo frame help in this? I know that jumbo frame have to be supported end to end, and the network switch where the host is currently connected doesn't support this, but I was wondering: 1) Does ESXi host support jumbo frames at all? 2) Can I enable it somehow? 3) If I do so, I guess bulk transfert between VMs and host would improve, but would this affect the communication going through the real switch as this doesn't do jumbo? Thanks for reading

  Read the article

• Magnetic Stripe Reader over Terminal Server has random Uppercase/Lowercase nonsense

  - by Peter Turner

  The Magnetic Stripe Reader that I'm using and testing is just supposed to be sending keystrokes. Unfortunately, it seems to randomly be sending upper case and lower case keystrokes, sometimes substituting % for 5 and ^ for 6 and vice versa. (If you've ever programmed for a magnetic strip reader, you know that's not a good thing.) Is there something in the RDP protocol that causes this? I've got kind of a convoluted system, running XP inside virtualbox on Fedora 11 RDP'ed into a win2k3 server. It works on the XP VM and it doesn't work on the RDP'ed one. What's weirder, is that I'm not even emulating the USB drivers for my Mag Card Reader. Linux is sending keystrokes straight in to windows, and MSTSC on windows XP is sending crap to the Win2k3 server. I'm 99% certain this isn't a problem with the card reader, it has nothing to do with my programming either. (I get the same junk coming into notepad that I get coming into our software [that's why I didn't ask on SO]). And, it works with rdesktop programs other than MSTSC.exe! Needless to say, I'm in need of some RDP Guruship.

  Read the article

• Dell 2970 - HP 1/8 G2 autoloader keeps falling off LSI 2032 SCSI chain

  - by middaparka

  I've a somewhat irritating problem with a Dell 2970 that has a HP 1/8 G2 autoloader (the Ultrium LTO 2 model) attached to the Dell/LSI 2032 non-RAID SCSI card. In essence, sometimes the autoloader/drive completely fails to appear on the SCSI chain (i.e.: there's neither a media changer or tape drive present within the device manager) and sometimes it appears but then subsequently disappears at a seemingly random (yet always inconvenient) time, resulting in backup failures. On most occasions, there are simply no errors logged in the system event log, but I did manage to capture a series of LSI_SCSI event ID 11 ("The driver detected a controller error on \Device\RaidPort0") errors followed by an event ID 129, ("Reset to device, \Device\RaidPort0, was issued") error during testing. I've tried two different cables, both with the same effect – sometimes the autoloader appears (for a while), sometimes it's completely absent. There's only one terminator I've tried to use, but as I've since successfully tested the autoloader on multiple occasions (albeit via a Adaptec U160 card on a different machine), my gut feel is that the issue doesn't lie with the terminator, or indeed the autoloader itself. As such, I'm just wondering if anyone has any ideas? It's most likely not relevant, but this is all under Windows SBS 2008, running Backup Exec 12.5 SBS edition (the Dell version), both fully patched. Addidtionally, the autoloader is running the latest firmware. It's been a while since I've dealt with anything SCSI, so all suggestions will be gratefully, gratefully received.

  Read the article

• Tri-head linux system with Xmonad: is it possible to have HW acceleration

  - by progo

  What means there exists to have three monitors, all controlled by Xmonad and have hardware 3D acceleration as well? I had the pleasure of using three monitors earlier this year, and while Xmonad and Xinerama handle three monitors easily, I had to throw in an extra display driver, and also let go of Nvidia's own TwinView (which is a hack on Xinerama). This left me with no HW acceleration and some flickering as double buffering wouldn't work with certain applications. However, the three monitors handle so beautifully that I had hard time coming back to two. I understand the easiest way to achieve HW-accelerated tri-head combo is to split into two Xorgs. I wouldn't be able to switch windows between the Xorgs, so I'm not really into this solution. What's more, having a cheap and old PCI card along with even slightly better PCIe seemed to slow things down. Even if I occasionally disabled the third monitor from Xorg configure, I couldn't get HW acceleration to work. Only after I physically disconnected the old PCI card, I could get the games back in business. Would a Matrox Dual/Tri-head2go and a powerful Nvidia GPU do the trick? I understand Xmonad can be configured to "believe" that a "single" (as Dualhead2Go will merge) 3360x1050 display is actually two different ones? So that Xmonad's Mod-w and Mod-e would work properly there.

  Read the article

• Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

  - by cpm

  I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

  Read the article

• Using Toshiba 22EL833 as PC display with GTX8800

  - by Oleg V. Volkov

  I had another Toshiba TV - 19SL738 - connected to this same PC and video card (GTX 8800) through DVI<-HDMI (DVI on PC side, HDMI on TV) before, that was working perfectly at it's native resolution 1360x768. Some time ago I had to change to 22EL833 and immediately faced problem with Windows 7 control panel and NVIDIA control panel both reporting native resolution for new TV as 1080i, 1920x1280, despite TV documentation saying that it have same 1360x768 as previous one. Practical tests confirmed that true native resolution is indeed 1360x768, because plugging in through DVI<-VGA and setting custom resolution through NVIDIA panel shown clear colors and crisp image, while setting anything different with either DVI<-VGA or DVI<-HDMI produced horribly distorted or squished images, with almost unreadable slim lines (as in letters, for example). Now, my problem is that there's no drivers for this TV and I'm unable to get good image while connecting it through DVI<-HDMI directly. The best I've achieved is editing EDID/driver manually, to persuade system that native resolution should be 1360x768, and while image became mostly clear, colors turned to some strange washed out effect, with pools of pure yellow, cyan and magenta there and there filling place of other colors. Gradients also became noticeably stripped as well. Somehow it looks like dithering gone bad and makes me suspect that image is still down/upscaled several times internally somewhere along the line. How can I connect this TV to DVI output of my video card to get best possible clear image, correct colors and correct native resolution?

  Read the article

• Loss of network connectivity when playing video on Optoma HD180 projector

  - by Jeff Fohl

  Hi Folks - New to Super User, so I hope this question fits in with the guidelines. Very strange problem I am having, and I am at a loss as to how to continue troubleshooting this one. The basic problem is that when I attempt to watch streamed video on a particular display device (an Optoma HD180 projector), my network connectivity drops like a stone to barely measurable levels. This is my setup: I have a Dell H2C 730x running Windows 7 64bit. This particular computer has two ATI Radeon HD 4800 video cards. I have two Samsung 22" monitors connected to one card, and an Optoma HD180 digital projector connected to the other card via an HDMI cable. My internet connection is normally a reliable 6Mbps. The problem I am having occurs when I stream video (or even just browse the web) on the Optoma Projector. When I do this, my internet connection drops to practically zero (just a few kilobits per second). When I move the browser away from the projector, and over to one of my Samsung monitors, the internet connection comes right back. Note that the Optoma projector is on and enabled as a third monitor all this time. I can move the mouse around on the projector without triggering the problem. I tried pinging my router when I was playing a movie on one of the monitors, and I get a 1 millisecond response. However, when I have the movie playing on the Optoma projecter, pinging the router gives me response times in the hundreds of milliseconds, or times out completely. So, it clearly is something local to my machine - and not some sort of throttling occurring down the line. I would think that it is possibly something to do with the HDMI driver conflicting somehow with my network driver (which is a USB-based wireless connection). This one has me really stumped. Anyone have any ideas?

  Read the article

• picking a linux compatable motherboard

  - by Chris

  Last time I bought a new computer (I build them myself) I got a motherboard that had really poor linux support for a long time. Specifically the audio. I had to wait months before the kernel supported the on board audio chipset. That is exactly the situation I'm trying to avoid this time around. I have some specific questions about "server motherboards" actually. I looked at a few models of server motherboards by intel, and some random models on newegg. I wasn't able to see much of a difference from regular desktop motherboard other than most had two sockets, and support for much more ram. These boards seem more popular with Linux users. Why? AMD and Intel both have server CPUs as well. Some question, what's the difference? To make this question more concrete, I was looking at this this motherboard. The main questions about it that I can't answer are: Can I get a motherboard without on board raid and audio? I wanted to get a hardware raid controller and a PCI audio card. I thought a server motherboard would be cheaper and not have these "extras", since who wants an audio card on a server? Where can I found out about Linux support for the components on this board? "Intel ICH10R", "Realtek ALC889", "Marvell 88E8056" I'm buying this computer to work as a Linux desktop for a lot of compiling, coding and audio/video work, but I don't want to rule out the possibility of installing windows and playing some games at one point. (even if the last game I got has been sitting in its box unopened for almost a year). Is it a good idea to buy a "server motherboard" and play games on it, or are desktop boards better value for this? The ultimate solution for me would be a motherboard that had GPL divers for onboard LAN, a single CPU socket, lots of PCI express and PCI. USB 3.0, and no fancy hard disk controllers since I'll be getting a separate one.

  Read the article

• My PC is powercycling, what's going wrong?

  - by Renai

  So here is my sorry story of woe. My PC has been functioning normally for some time. Last week I bought a cheapish powered USB hub and plugged it into my home PC, which runs Windows 7. This weekend I plugged that hub into my home PC. At some stage I hibernated the PC. Then later on I plugged my Kobo eReader into the hub to charge. Later on I started the PC up. Only thing is, it now won’t start up. It just powercycles on for a second and a half with the fans at full, then powercycles off. Then back on for two seconds, then back off. There’s no display at all and it won’t get to the BIOS screen. It looks like anything USB is not functioning — the keyboard and mouse are not lighting up etc. I’ve taken out the BIOS battery and reseated the RAM, reseated the graphics card and so on, but my suspicion is that I have blown the USB section of the motherboard somehow. Suggestions? All else failing, where is the best place to take this machine in Sydney to get evaluated? It’s a fairly powerful beast, all up has cost me about $2500 over the years, including upgrades and a recent new graphics card, so can’t just start from scratch.

  Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >