Search Results

Search found 5120 results on 205 pages for 'inline editing'.

Page 115/205 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

• NVIDIA Graphics - resolution problems with new 12.04 LTS installation

  - by Daveisuser56810

  I've been trying to install Ubuntu 12.04 LTS on my desktop most of the day. The desktop uses a NVIDIA GEFORCE 9800 (GT I think) graphics card. I am unable to set the correct resolution (1680 x 1050) for the display. The first problem I had was that of the "Black Screen" during install. I overcame this by utilising the "nomodeset" switch on the install options (once I'd found how to do that). The second problem of course was the "Black screen" following the first reboot. Once again this was overcome by using "nomodeset", this time by "editing" the GRUB. This gave me a resolution of 1280x768 which, the Displays GUI allowed me to change to 1280x720 (appears to fit on screen). I then tried to install the NVIDIA drivers. 1) using additional drivers 2) manually by downloading driver and installing in root As soon as NVIDIA drivers are installed - resolution become restricted to 640x480 (max). At this resolution Ubuntu GUI is not usable as most screens are larger than the display. Removing the NVIDIA driver and removing the XORG.CONF file does not lift this restriction. I have tried most things that I have found and that were vaguely intelligible, but nothing appears to get me closer to a resolution of 1680x1050. UPDATE: reinstalled Ubuntu 12-04 and used the "NoModeSet" in the Grub to restore the resolution to 1280x720, which is at least usable. Will live with this for now.

  Read the article

• Proper updating of GeoClipMaps

  - by thr

  I have been working on an implementation of gpu-based geo clip maps, but there is a section of the GPU Gems 2 article that i just can't seem to understand, specifically this paragraph and more precisely the bolded part: The choice of grid size n = 2k-1 has the further advantage that the finer level is never exactly centered with respect to its parent next-coarser level. In other words, it is always offset by 1 grid unit either left or right, as well as either top or bottom (see Figure 2-4), depending on the position of the viewpoint. In fact, it is necessary to allow a finer level to shift while its next-coarser level stays fixed, and therefore the finer level must sometimes be off-center with respect to the next-coarser level. An alternative choice of grid size, such as n = 2k-3, would provide the possibility for exact centering Let's take an example image from the article: My "understanding" of the way the clip maps were update was that you floor the position of the viewpoint to an int, and such get the center vertex point if this is not the same as the previous center point, you update the entire map. Now, this obviously is not the case - but what I am failing to understand is this: If you look at the image above, if the viewpoint was to move one unit to the right, then the inner ring (the one just around the view point + white center square) would end up getting a 1 unit space on both the left and right side of itself. But there is nothing in the paper that deals with this, what i mean is that it would end up looking like this (excuse my crummy cut-and-paste editing of the above image): This is obviously not a valid state of the. So, would the solution be that a clip ring (layer) can only move in increments of the ring/layer it's contained within? Wouldn't this end up being very restrictive? I feel like I am missing some crucial understanding of parts of the algorithm, but I have been over both this paper and the original paper from 2004 and I just can't see what I am not getting.

  Read the article

• Restoring GRUB2 on Software RAID 0 using LiveCD after Windows 7 wiped it

  - by unknownthreat

  I have installed Ubuntu 10.10 on my system. However, I need to install Windows 7 back, and I expect that it would alter GRUB and it did. Right now, my partition on my Software RAID 0 looks like this: nvidia_acajefec1 is Ubuntu 10.10 and nvidia_acajefec3 is Windows 7. I've been following some guides around and I am always stuck at GRUB not able to detect the usual RAID content. I've tried running: sudo grub > root (hd0,0) GRUB complains it couldn't find my hard disk. So I tried: find (hd0,0) And it complains that it couldn't find anything. So I tried: find /boot/grub/stage1 It said "file not found". Here's the text from the console: ubuntu@ubuntu:~$ grub Probing devices to guess BIOS drives. This may take a long time. [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ] grub> root (hd0,0) root (hd0,0) Error 21: Selected disk does not exist grub> find /boot/grub/stage1 find /boot/grub/stage1 Error 15: File not found Fortunately, I got one person suggesting that what I've been trying to do is for GRUB Legacy, not GRUB2. So I went to the suggested website, ** (http://grub.enbug.org/Grub2LiveCdInstallGuide) **try to look around, and try: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sda This is just the step 2 of the instruction in the http://grub.enbug.org/Grub2LiveCdInstallGuide and I cannot proceed because it cannot seek /dev/sda. However, ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So what now? Do you have an idea for how to make fdisk see my RAID array on live cd (Ubuntu 10.10)? Honestly, I am lost, very lost in trying to restore GRUB2 on this software RAID 0 system right now.

  Read the article

• Byte Size Tips: How to Show Google / Gmail Contacts in the OS X Contacts App

  - by The Geek

  The Contacts app on OS X isn’t very interesting, but if you can use it to display your Gmail contacts, it’ll get a little bit better. Luckily it’s pretty easy to add your Google / Gmail contacts, but you’ll have to click the mouse a few times and maybe poke at the old keyboard once or twice to type in your email address and password. It’s worth noting that if you set up Gmail in the Mail app you shouldn’t have to do this. Since we prefer Gmail in a browser, that’s why we’re writing this. Or just because we’re procrastinating the book editing that we’re supposed to be doing. Don’t judge. Start by opening the Preferences for the Contacts app by heading up to the Menu bar. Go to Accounts and then click the + sign to add a new one. Choose CardDAV for the account type, use your Gmail username and password, and put google.com as the server address. If you are using two-factor authentication, you’ll need to create a specific password for this account.    

  Read the article

• cpnfigure open_basedir under Plesk

  - by cori

  This might be a question for ServerFault, and f it wasn't for the Plesk aspect I would ask it there to start with, so if it's better suited for over there let me know and I'll move it. I'm working on a dedicated server set up as a reseller account with Plesk to manage the domains and server configuration, and i need to add a directory to the local open_basedir configuration for a specific vhost. Given Plesk's normal methodology, I expected to be able to go to /var/www/vhost/{%DOMAINNAME%}/conf and modify vhost.conf and place a new value there, as I have successfully done with other configuration settings for this domain (turning safe_mode off, for instance). When I do so, however, the new setting doesn't take (per phpinfo();). If I edit httpd.conf (which the plesk configuration specifically says not to do in the notes at the top of httpd.conf) the setting takes. Is there something specific about the open_basdir setting that makes it not configurable in vhost.conf? How much trouble am I letting myself in for by editing the vhost-specific httpd.conf (I imagine is someone makes changes in the plesk web interface it might be overwritten, but what other risk is there)? Thanks!

  Read the article

• Ubuntu 12.04LTS stuck at login mouse and keyboard not responding

  - by user169954

  I have Ubuntu 12.04LTS installed on a dual-booted machine (i5 dual core 8G ram) and it's been working fine, but today for some reason when I logged out and tried to log back in it is stuck at the login page, i.e. the mouse and the keyboard are not responding. The mouse is stuck at the top left corner of my screen, and I can do nothing but to turn the machine off. (I have been using logitech wireless mouse and keyboard.) I can not access the virtual console (Alt-F1 or Cntrl-Alt-F1) either! Here is what I have tried so far: Verified it is not a H/W problem since the mouse and keyboard work fine with windows7 Booted with ubuntu installation dvd and ran trial mode and mouse and keyboard worked fine. Tried bypassing the login screen by booting into recovery mode and editing tty1.conf, but to no avail. I moved .Xauthority .profile and .bashrc from my $HOME to another location so my login would proceed completely by system defaults. But this did not help From recovery mode commandline used to dpkg-reconfigure to switch between gdm and lightgdm. This did not help either. By the way, when in recovery mode as root from command line I mount the filesystem, all apps work fine. Python is Ok, octave is ok, vi is ok etc. I have a feeling if I could only bypass the login screen, and automatically get into the desktop, I will be ok. But I haven't been able to accomplish this either. I desperately need help please. Thank you in advance. Update: So I tried to switch to lightdm by dpkg-configure lightdm. This at least brings me up to the classical linux commandline login prompt but without a gui. Should I install startx? Should I install ubuntu-desktop?

  Read the article

• Does unit testing lead to premature generalization (specifically in the context of C++)?

  - by Martin

  Preliminary notes I'll not go into the distinction of the different kinds of test there are, there are already a few questions on these sites regarding that. I'll take what's there and that says: unit testing in the sense of "testing the smallest isolatable unit of an application" from which this question actually derives The isolation problem What is the smallest isolatable unit of a program. Well, as I see it, it (highly?) depends on what language you are coding in. Micheal Feathers talks about the concept of a seam: [WEwLC, p31] A seam is a place where you can alter behavior in your program without editing in that place. And without going into the details, I understand a seam -- in the context of unit testing -- to be a place in a program where your "test" can interface with your "unit". Examples Unit test -- especially in C++ -- require from the code under test to add more seams that would be strictly called for for a given problem. Example: Adding a virtual interface where non-virtual implementation would have been sufficient Splitting -- generalizing(?) -- a (smallish) class further "just" to facilitate adding a test. Splitting a single-executable project into seemingly "independent" libs, "just" to facilitate compiling them independently for the tests. The question I'll try a few versions that hopefully ask about the same point: Is the way that Unit Tests require one to structure an application's code "only" beneficial for the unit tests or is it actually beneficial to the applications structure. Is the generalization code need to exhibit to be unit-testable useful for anything but the unit tests? Does adding unit tests force one to generalize unnecessarily? Is the shape unit tests force on code "always" also a good shape for the code in general as seen from the problem domain? I remember a rule of thumb that said don't generalize until you need to / until there's a second place that uses the code. With Unit Tests, there's always a second place that uses the code -- namely the unit test. So is this reason enough to generalize?

  Read the article

• Is it good idea to require to commit only working code?

  - by Astronavigator

  Sometimes I hear people saying something like "All committed code must be working". In some articles people even write descriptions how to create svn or git hooks that compile and test code before commit. In my company we usually create one branch for a feature, and one programmer usually works in this branch. I often (1 per 100, I think and as I think with good reason) do non-compilable commits. It seems to me that requirement of "always compilable/stable" commits conflicts with the idea of frequent commits. A programmer would rather make one commit in a week than test the whole project's stability/compilability ten times a day. For only compilable code I use tags and some selected branches (trunk etc). I see these reasons to commit not fully working or not compilable code: If I develop a new feature, it is hard to make it work writing a few lines of code. If I am editing a feature, it is again sometimes hard to keep code working every time. If I am changing some function's prototype or interface, I would also make hundreds of changes, not mechanical changes, but intellectual. Sometimes one of them could cause me to carry out hundreds of commits (but if I want all commits to be stable I should commit 1 time instead of 100). In all these cases to make stable commits I would make commits containing many-many-many changes and it will be very-very-very hard to find out "What happened in this commit?". Another aspect of this problem is that compiling code gives no guarantee of proper working. So is it good idea to require every commit to be stable/compilable? Does it depends on branching model or CVS? In your company, is it forbidden to make non compilable commits? Is it (and why) a bad idea to use only selected branches (including trunk) and tags for stable versions?

  Read the article

• CodePlex Daily Summary for Wednesday, October 24, 2012

  CodePlex Daily Summary for Wednesday, October 24, 2012Popular ReleasesfastJSON: v2.0.9: - added support for root level DataSet and DataTable deserialize (you have to do ToObject<DataSet>(...) ) - added dataset testsInfo Gempa BMKG: Info Gempa BMKG v 1.0.0.3: Release perdana aplikasi pembaca informasi gempa dari data feeder BMKG.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.72: Fix for Issue #18819 - bad optimization of return/assign operator.DNN Module Creator: 01.01.00: Updated templates for DNN7 ( ie. DAL2, Web Service API ). Numerous bug fixes and enhancements.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.390: Version 2.5.0.390 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Fix recent file list remove issue. WAF: Minor code improvements. BookLibrary: Fix Blend design time support o...ltxml.js - LINQ to XML for JavaScript: 1.0 - Beta 1: First release!ZXMAK2: Version 2.6.6.0: + fix refresh debugger after open RZX file + add NoFlic video filterEPiServer CMS ElencySolutions.MultipleProperty: ElencySolutions.MultipleProperty v1.6.3: The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London). Installation notes The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below: Embedded: <location path="util/ElencySolutionsMultipleP...Fiskalizacija za developere: FiskalizacijaDev 1.1: Ovo je prva nadogradnja ovog projekta nakon inicijalnog predstavljanja - dodali smo nekoliko feature-a, bilo zato što smo sami primijetili da bi ih bilo dobro dodati, bilo na osnovu vaših sugestija - hvala svima koji su se ukljucili :) Ovo su stvari riješene u v1.1.: 1. Bilo bi dobro da se XML dokument koji se šalje u CIS može snimiti u datoteku (http://fiskalizacija.codeplex.com/workitem/612) 2. Podrška za COM DLL (VB6) (http://fiskalizacija.codeplex.com/workitem/613) 3. Podrška za DOS (unu...MCEBuddy 2.x: MCEBuddy 2.3.4: Changelog for 2.3.4 (32bit and 64bit) 1. Fixed a bug introduced in 2.3.3 that would cause HD recordings and recordings with multiple audio channels to fail. 2. Updated <encoder-unsupported> option to compare with all Audio tracks for videos with multiple audio tracks. 3. Fixed a bug with SRT and EDL files, when input and output directory are the same the files are not preserved.Liberty: v3.4.0.0 Release 20th October 2012: Change Log -Added -Halo 4 support (invincibility, ammo editing) -Reach A warning dialog now shows up when you first attempt to swap a weapon -Fixed -A few minor bugsFoxOS: Stable Fox: Stable Fox Versione 0.0.0.1 Richiede .NET Framework 3.5 o superioriDoctor Reg: Doctor Reg V1.0: Doctor Reg V1.0 PT-PTkv: kv 1.0: if it were any more stable it would be a barn.LINQ for C++: cpplinq-20121020: LINQ for C++ is an attempt to bring LINQ-like list manipulation to C++11. This release includes just the source code. What's new in this release: join range operators: Inner Joins two ranges using a key selector reverse range operator distinct range operator union_with range operator intersect_with range operator except range operator concat range operator sequence_equal range aggregator to_lookup range aggregator This is a sample on how to use cpplinq: #include "cpplinq.h...helferlein_Form: 02.03.05: Requirements.Net 4.0 DotNetNuke 05.06.07 or higher, maybe it works with lower versions, but I developed it on this one and tested it on DotNetNuke 06.02.00 as well helferlein_BabelFish version 01.01.03 - please upgrade this first! Issues fixed Fixed issue with all users from all portals are listed as Host users in the sender options (E-Mail Options - Sender - ALL Users Listed) Registered postback-button for Excel-Export on Form submission edit control Changed behaviour Due to some mis...ClosedXML - The easy way to OpenXML: ClosedXML 0.68.1: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Orchard Project: Orchard 1.6 RC: RELEASE NOTES This is the Release Candidate version of Orchard 1.6. You should use this version to prepare your current developments to the upcoming final release, and report problems. Please read our release notes for Orchard 1.6 RC: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you wil...Rawr: Rawr 5.0.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Yahoo! UI Library: YUI Compressor for .Net: Version 2.1.1.0 - Sartha (BugFix): - Revered back the embedding of the 2x assemblies.New ProjectsASP.NET DatePicker (Persian/Gregorian): This is just another DatePicker for ASP.NET that supports both Persian (Jalali/Shamsi/Solar) and Gregorian Calendar.AspectMap: AspectMap is an Aspect Oriented framework built on top of the StructureMap IoC framework.Building a Pinterest like Image Crawler: More about it here : http://www.alexpeta.ro/article/building-a-pinterest-like-image-crawlerCRM 2011 client scripting TypeScript definition file: xrm crm 2011 typescript javascript definition fileDarkSky Commerce: DarkSky Commerce is an Orchard module that provides a generic and extensible set of core commerce features and servicesDarkSky Learning: An Orchard module providing E-learning authoring tools and engines.Dusk Consulting: Dusk Consulting provides automation scripts to help IT Professionals and Developers alike.Edi: Edi is a an IDE based editor that is currently focused on text based editing (other editors may follow). This project is based on AvalonDock 2.0 and AvalonEdit.Entity Framework Extensions: This project includes extensions for the entity framework, includes unit of work pattern with event support, repository pattern with event support, and so on.EPiBoost (EPiServer 7 MVC Toolkit): Coming SoonExtended Guid: Easilly create version 5 guids. Converts an arbitrary string to a guid given a specific work area, or namespace.FileToText: pour la création de liste de fichierFilmBook, Film and Photo Archival Management: FilmBook is a simple image gallery and organization application. It's goal is to help identify the location of negatives in an archival page.FridgeBoard: Este proyecto está siendo realizado por alumnos de informática. No nos hacemos responsables de la mala calidad del mismo.GIV_P1: testyIQTool: Provide a set of tools to generate reports capturing the state of a server. This is written in powershell to allow easy modification / update of the scriptsLeaving Application System: have a good time.Leaving Management System: optimize work flow of staff work attendance managementltxml.js - LINQ to XML for JavaScript: ltxml.js is an XML processing library for JavaScript that is inspired by and largely similar to the LINQ to XML library for .NET.Microsoft .NET SDK For Hadoop: A collection of API's, tools and samples for using .NET with Apache Hadoop.MyLib: This is my personal library of various tidbits that I have been using regularly. Includes a generic repository with EF and MongoDB implementations.Parlez MVC: A multi-lingual implementation for the ASP.NET MVC 4 framework to make it easier to build websites that are viewable in different languages.Perfect Sport Nutrition: Proyecto realizado por la Empresa de Desarrollo Software SoftwareHC E.I.R.LScale Model Database: This project is a work of databasesSliding Block Puzzle: This is a simple (not very good) game for Windows Phone 7.1 (Mango). The point of it is to show off how to do different things in WP7.1.SmallBasic Extension Manager: SXM, or the SmallBasic Extension Manager, is a program intended for use with the Small Basic programming language from Microsoft.SQL Azure Federation Backup to Azure Blob Storage using Azure Worker: Azure Worker project, that will backup any number of Azure SQL Databases to any selected Azure Blob containers. Config in XML. Automatic 7z compression.TeF: A framework for running tests with a plenty of features and ease of use.Testge: testTwittOracle: This project is a prototype project intended to be submitted in a competition. The details will be updated later as things are finalized.uMembership - Alternative Umbraco Member Api: uMembership is an alternative and faster way of dealing with Members in Umbraco when you have 1000's or even 100Variedades Silverlight 5: Varidades Silverlight 5Website d?t tour du lich: Ð? án môn ASP.NET Xây d?ng website d?t tour du l?ch d?a trên mô hình MVCWPF About Box: WPF About Box is simple and free about box for WPF using MVVM pattern. Several properties can be set. Some properties are read from assembly, automatically.WTUnion: WTUnionXML Cleaner: Console app for batch cleaning XML files containing ilegal caracters. It can be useful for cleaning XML files before importing them to SOLR or something similarXmlToObject: XmlToObject is a .Net library for object serialization with use of XPath expressions applied to class fields and properties via custom attributes.XNAGalcon: This Project will create Galcon Game for XNA version

  Read the article

• configure open_basedir under Plesk

  - by cori

  This might be a question for ServerFault, and if it wasn't for the Plesk aspect I would ask it there to start with, so if it's better suited for over there let me know and I'll move it. I'm working on a dedicated server set up as a reseller account with Plesk to manage the domains and server configuration, and I need to add a directory to the local open_basedir configuration for a specific vhost. Given Plesk's normal methodology, I expected to be able to go to /var/www/vhost/{%DOMAINNAME%}/conf and modify vhost.conf and place a new value there, as I have successfully done with other configuration settings for this domain (turning safe_mode off, for instance). When I do so, however, the new setting doesn't take (per phpinfo();). If I edit httpd.conf (which the plesk configuration specifically says not to do in the notes at the top of httpd.conf) the setting takes. Is there something specific about the open_basdir setting that makes it not configurable in vhost.conf? How much trouble am I letting myself in for by editing the vhost-specific httpd.conf (I imagine is someone makes changes in the plesk web interface it might be overwritten, but what other risk is there)? Thanks!

  Read the article

• How to Pin Any File to the Start Screen in Windows 8

  - by Taylor Gibb

  By default Windows 8 only allows you to pin a few file types to the Start Screen. Read on to find out how you can change that by editing the registry. How to Pin Any File to the Start Screen in Windows 8 Press the Win + R keyboard combination to open a run box, then type notepad and press enter. When notepad opens, paste the following into the new document: Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\*\shell\pintostartscreen] “MUIVerb”=”@shell32.dll,-51201″ “NeverDefault”=”" “Description”=”@shell32.dll,-51202″ “MultiSelectModel”=”Single” [HKEY_CLASSES_ROOT\*\shell\pintostartscreen\command] “DelegateExecute”=”{470C0EBD-5D73-4d58-9CED-E91E22E23282}” Then click on the File menu item and select save as… Before you go any further, change the Save as type to All Files. Then give your file a name ending in .reg and click Save. PinToStartHack.reg To use the hack, just double click on the .reg file you just created. When you are prompted about whether you want to continue, click Yes. Now you can pin any file to the Start Screen. Undo the Change If you ever wish to undo the change, press the Win + R keyboard combination and type regedit, then press enter. Then drill down into: HKEY_CLASSES_ROOT\*\shell\ Finally delete the pintostartscreen key. That’s all there is to it. How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode

  Read the article

• High quality/performance shared hosting (in northern Europe)

  - by Bente

  I work as a web developer on almost all levels. However, my typical customer is a 1-5 guys running some sort of consulting business. They have (or want) a web page with some kind of CMS so the can perform most (or all) editing themselves. I normally opt for Concrete5 as my default CMS because it's the most user friendly (and free) CMS I have found. My good recurring customers I host on my own server as a service, but I need a good host for the customers where I want to deliver a product and not be responsible for whatever may happen in the future. However, I still struggle with hosting! Experience shows that the typical ~1$ shared hosting is waaay to slow to run concrete5 smoothly, and a VPS is out of the question because I don't want to maintain it. So, where can I find as fast (from northern Europe), reliable, shared host where I can put a site and don't have to worry about the server going down or being unmaintained. I expect this should cost around $10-$20 but I'm open to all kinds of suggestions because different customers have different budgets.

  Read the article

• Please help restore my crashed launcher/compizconfig

  - by Will

  I have just upgraded from 11.04 to 11.10. Everything worked fine at first, but at one point when I was editing some CompizConfig settings (just something basic like 'number of desktops'), CompizConfig crashed. Then the whole launcher disappeared, along with most of the buttons in the top panel. The shutdown button, calendar, etc. all went, leaving just the tabs from File to Help. Also, windows now have the title and File, Edit..(etc) tabs on 2 separate lines, instead of the new format where hovering over the bar switches which one is visible. I have since been using Ctrl+Alt+T to open a terminal and open applications, shut down, etc, from there. I have typed in the command: unity --reset which has some effect, but the terminal never reaches the end of the task. I've also done apt-get update, which completed fine. Can anyone help me restore the launcher and panel functions?? I am getting most frustrated by the fact that once I have opened Firefox, I can't enter any other commands!

  Read the article

• Why do the GNOME symbolic icons appear darker in a running application?

  - by David Planella

  I'm creating an application that uses symbolic icons from the default theme. However, there are a few icons that I need that cannot be represented by those from the default theme, so I'm creating my own ones. What I did was to simply go to /usr/share/icons/gnome/scalable/actions/, copied a few locally into my app's source tree that could serve as a basis, and started editing them. So far so good. But I've noticed the following: all symbolic icons are of a light grey color when looking at the original .svg file, but when they are put onto a widget, they become darker. Here's an example, using the /usr/share/icons/gnome/scalable/actions/view-refresh-symbolic.svg icon from the default theme: Here's what it looks like when opening the original with Inkscape: And here's what it looks like on a toolbar on a running application: Notice the icon being much darker at runtime. That happens both with the Ambiance and Radiance themes. I wouldn't mind much, but I noticed it affects my custom icon, whereby parts of it become darker (the inner fill), whereas parts of it remain the same color as the original (the stroke). So what causes the default symbolic icons to darken and how should implement that for my custom icons?

  Read the article

• Newbie tips, please [closed]

  - by eXeP

  So, I just got a new computer and I want to put Ubuntu on my old laptop. I just need few tips before installing it. 1.Programs, where to download, how to download, what is the "ending" (windows has .exe) 2. How much is command line involved? And where to get the most usual commands? 3.Few programs you recommend (graphics editing, IDE, video player, web browser) 4. Do I have to download drivers when installing new OS? I plan on getting fully rid of Windows. I have no idea of the name of my graphics card, so how do I can get to know what it is if I have to download drivers? (I don't know the name because it's not on the original box, or anywhere on the internet, believe me) 5. When installing new OS does it destroy everything else on the hard drive? 6. Anti-virus, do I need one? I'm not super paranoid, and I don't visit "shady" sites. Please note that I have never used linux, or any other OS than Windows and sorry for my bad english. If this is the wrong place to post this, then please remove this. Thank you.

  Read the article

• Displaying a Grid of Data in ASP.NET MVC

  One of the most common tasks we face as a web developers is displaying data in a grid. In its simplest incarnation, a grid merely displays information about a set of records - the orders placed by a particular customer, perhaps; however, most grids offer features like sorting, paging, and filtering to present the data in a more useful and readable manner. In ASP.NET WebForms the GridView control offers a quick and easy way to display a set of records in a grid, and offers features like sorting, paging, editing, and deleting with just a little extra work. On page load, the GridView automatically renders as an HTML <table> element, freeing you from having to write any markup and letting you focus instead on retrieving and binding the data to display to the GridView. In an ASP.NET MVC application, however, developers are on the hook for generating the markup rendered by each view. This task can be a bit daunting for developers new to ASP.NET MVC, especially those who have a background in WebForms. This is the first in a series of articles that explore how to display grids in an ASP.NET MVC application. This installment starts with a walk through of creating the ASP.NET MVC application and data access code used throughout this series. Next, it shows how to display a set of records in a simple grid. Future installments examine how to create richer grids that include sorting, paging, filtering, and client-side enhancements. We'll also look at pre-built grid solutions, like the Grid component in the MvcContrib project and JavaScript-based grids like jqGrid. But first things first - let's create an ASP.NET MVC application and see how to display database records in a web page. Read on to learn more! Read More >

  Read the article

• Weird system freeze. Nothing works keyboard/mouse/reset button - Ubuntu 12.04 64bits [closed]

  - by Simon

  I have fresh PC: i5 3570K with Intel 4000 onboard ASrock Z77 Extreme4-m 8GG RAM - Adata 1333Mhz... 1TB Seagate drive 7200rpm I've also fresh systems - Ubuntu/Win7 and today there was something strange. Ubuntu twice just freezed. Everything stopped, even keyboard and mouse wasn't responding. Even RESET button didn't work. Right now memtest is running, but I'd like to know, where else can i look for cause. Can it be software fault if even reset isn't working? Only long reset pressing rebooted PC... I'm a bit confused. Or should I test components - CPU, motherboard, disk. Which logs in Ubuntu should I check to diagnose cause? EHm I had few adventures with this PC already. Shipped motherboard was broken (ASrock Z68 Extreme3) and had old bios, so I had to contact with reseller, replace it and at the end decided on Z77, but everything took 3 weeks, so I have bad feelings... Edit: Both freezes were during editing something in gedit (it can be coincidence) and after few updates today - when memtest is end I'll check what was updated

  Read the article

• Is there a cheaper non-express non-student, non-msdn version of Visual Studio 2010 that supports plugins in the US than the $710 Professional Edition?

  - by Justin Dearing

  I've never actually purchased a copy of Visual Studio myself. SharpDevelop and Express edition have always been good enough for my personal use, and my employers always furnished me with the IDEs I needed to serve them. However, I'm thinking of actually paying for a copy for my personal laptop. I need this mainly so I can open solutions that contain web projects. So my question is: Is there an edition cheaper than the $710 Pro edition on Amazon that will do what I need: http://www.amazon.com/Microsoft-C5E-00521-Visual-Studio-Professional/dp/B0038KTO8S/ref=sr_1_2?ie=UTF8&qid=1287456230&sr=8-2 ? What I need is defined as: Open up a solution with C#, Web App, VB.NET, and Web Projects. Install addins like resharper, testdriven.net, etc, SCM plugins, etc. Some level of db project support. At least to be able to open a dbproj. I only need that for SCM hooks. SSMS and SQLCMD are good enough for actually editing databases. Ability to install F#, IronPython, IronRuby etc. Now naturally I'm a fairly intelligent resourceful person so I realize I can get Visual Studio in a questionable manner. Thats not what I'm looking to do. I want a legal copy, I don't want a student copy, or an MSDN copy. I want a real copy, I just want to make sure I get the cheapest edition that serves my needs.

  Read the article

• Wrong resolution for Lightdm/GDM on Ubuntu 13.04 using HDMI

  - by f03lipe

  I've tried all the solution I could find on the matter so far, but the error persists. My problem is that the login screen (both under gdm and lightdm) runs with the wrong resolution, even though all is fine when I log in. The error occurs solely when I have my HDMI cable connected to my other screen. The login screen resolution becomes 1024x768 (for my 1366x768 laptop screen) and mirrored on my screen, which is 1920x1080. I've had this issue on version 12.04 (the last one before I upgraded to 13.04), but I got it fixed by adding the xrandr commands on the begining of the /etc/gdm/Init/Default file. This doesn't seem to work anymore. I've also tried telling lightdm to run a script fixing the resolution with xrandr (by editing /etc/lightdm/lightdm.conf), but lightdm crashes, and I'm forced to log in with low graphic settigs. Hint: when ubuntu is loading, the resolution starts OK, then goes bad right before the login screen is initialized. Does that mean that there's nothing wrong with my graphic cards? What do you think? Cheers!

  Read the article

• Generate a Word document from list data

  - by PeterBrunone

  This came up on a discussion list lately, so I threw together some code to meet the need.  In short, a colleague needed to take the results of an InfoPath form survey and give them to the user in Word format.  The form data was already in a list item, so it was a simple matter of using the SharePoint API to get the list item, formatting the data appropriately, and using response headers to make the client machine treat the response as MS Word content.  The following rudimentary code can be run in an ASPX (or an assembly) in the 12 hive.  When you link to the page, send the list name and item ID in the querystring and use them to grab the appropriate data. // Clear the current response headers and set them up to look like a word doc.HttpContext.Current.Response.Clear();HttpContext.Current.Response.Charset ="";HttpContext.Current.Response.ContentType ="application/msword";string strFileName = "ThatWordFileYouWanted"+ ".doc";HttpContext.Current.Response.AddHeader("Content-Disposition", "inline;filename=" + strFileName);// Using the current site, get the List by name and then the Item by ID (from the URL).string myListName = HttpContext.Current.Request.Querystring["listName"];int myID = Convert.ToInt32(HttpContext.Current.Request.Querystring["itemID"]);SPSite oSite = SPContext.Current.Site;SPWeb oWeb = oSite.OpenWeb();SPList oList = oWeb.Lists["MyListName"];SPListItem oListItem = oList.Items.GetItemById(myID);// Build a string with the data -- format it with HTML if you like. StringBuilder strHTMLContent = newStringBuilder();// *// Here's where you pull individual fields out of the list item.// *// Once everything is ready, spit it out to the client machine.HttpContext.Current.Response.Write(strHTMLContent);HttpContext.Current.Response.End();HttpContext.Current.Response.Flush();

  Read the article

• Tiled Editor: How is this Map Handling Collision?

  - by user2736286

  BrowserQuest map in question. From what I understand, with tiled, there are two main ways to specify collision: Create an object layer, and interpret the shapes in the engine as collision objects. Create a tiled layer, and make all tiles in the layer have a collision property, and interpret all tiles in the layer as collision objects. I'm using BrowserQuest as a big source of inspiration for my project, and I want to know how they handled collision on the level editing side. I've checked through all their layers, expecting an object layer to be handling cliff collision like: But there are no such object layers to be found. Furthermore, the tile layers containing the tiles for such cliffs have no properties at all, meaning that they didn't just specify "collision" for such tile layers. I especially need to know how they handled less rectangular shapes like: I could imagine that they are not using explicit collision layers, but instead determining collision in the actual engine, based off the presence of specific tile layer sprites. Only because BrowserQuest has whole-tile movement, and it wouldn't look too odd if a small apple, taking up only a fraction of the tile size, prevents movement over that entire tile. But I'm creating a game with more precise movement, so collision has to be tight to the apple, and I really want to know how BrowserQuest approached collision defining. If anyone knowledgeable with Tiled could take a quick look at the map, I'd appreciate it! I'm tearing my hair out here :). Thanks

  Read the article

• How to adjust the appearance of the Unity in 12.10?

  - by piedro

  Now I updated to 12.10 and would like to adjust the desktop, well unity, appearance. I know there is the theme setting, but I cannot adjust the symbol theme or windows decoration with the systemsettings. I used to use the tool "unsettings" but it doesn't work with 12.10 anymore. Ubuntu Tweak used to be an option but at this point many features are broken and a lot of settings seem to mess up my system or they don't change anything at all (I understand that there has been a design settings change - gsettings, dconf, something ...) myunity has some options to change stuff but I couldn't find it for 12.10 ... not to forget "gnome-tweak-tool" which seems to work for most settings but not for all, e.g. it doesn't change the mouse cursor and the windows decorations do not show some decorations I'd like to use and I am also afraid of messing things up because it is supposed to be used in gnomeshell ... actually as I found out right now it really messes things up: fonts get inverted, suddenly high contrast accessibility setings are used in some windows, nautilus has white fonts on white background and even the login manager is a mess now ... So: How can I adjust the theme, symbol, decorations, fonts for the normal user and for the desktop and for the applications including the applications started as sudo user? I should mention that I upgraded from 12.04 and that some applications like synaptic completely ignore any settings ... sadly it is a mess, there was a time when gnome theming was really well done and very adjustable, I wonder what happened ... Just now I read that further development of Ubuntu Tweak has been stopped. The developer announced that he won't go any further with the software and the online services ... That is sad and destroys my hope for easy appearance editing just by waiting ... has been such a nice tool for 12.04 ... r.i.p.

  Read the article

• Package libxul not fount - Kiwix Wikpedia in Ubuntu Precise 12.04

  - by JHOSmAN

  I'm trying to install the service Kiwix but I need a library that is not available for Ubuntu 12.04 LTS Precise leave the log and if someone could tell me how to install Seller would appreciate. kiwix-0.9# ls aclocal.m4 COMPILE config.sub COPYING install-sh ltmain.sh missing static AUTHORS config.guess configure depcomp kiwix Makefile.am README CHANGELOG config.log configure.ac desktop libxul-dev_1.8.1.16+nobinonly-0ubuntu1_all.deb Makefile.in src root@ubuntu-MM061:/home/ubuntu/Escritorio/kiwix-0.9# ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking for g++... g++ checking for cl... no checking for cl... no checking for Xcode... no checking for jar... jar checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking how to run the C++ preprocessor... g++ -E checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for ranlib... (cached) ranlib checking whether make sets $(MAKE)... (cached) yes checking for pkg-config... pkg-config checking for perl... perl checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking float.h usability... yes checking float.h presence... yes checking for float.h... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking wchar.h usability... yes checking wchar.h presence... yes checking for wchar.h... yes checking for stdbool.h that conforms to C99... yes checking for _Bool... no checking for inline... inline checking for int16_t... yes checking for int32_t... yes checking for int64_t... yes checking for int8_t... yes checking for off_t... yes checking for pid_t... yes checking for size_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for uint64_t... yes checking for uint8_t... yes checking for ptrdiff_t... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking for working strtod... yes checking for getcwd... yes checking for gettimeofday... yes checking for memmove... yes checking for memset... yes checking for pow... yes checking for regcomp... yes checking for sqrt... yes checking for strcasecmp... yes checking for strchr... yes checking for strdup... yes checking for strerror... yes checking for strtol... yes Package libxul was not found in the pkg-config search path. Perhaps you should add the directory containing libxul.pc' to the PKG_CONFIG_PATH environment variable No package 'libxul' found Package libxul was not found in the pkg-config search path. Perhaps you should add the directory containinglibxul.pc' to the PKG_CONFIG_PATH environment variable No package 'libxul' found checking for /stable... no checking for "/nsISupports.idl"... no configure: error: unable to find nsISupports.idl apt-get install libxul Leyendo lista de paquetes... Hecho Creando árbol de dependencias Leyendo la información de estado... Hecho E: No se ha podido localizar el paquete libxul

  Read the article

• Telerik Extensions for ASP.NET MVC Q1 2010 is out!

  Today we shipped the Q1 2010 release out of the door. Go download the open source or if you are a licensed customer download it from your client.net account.   What is new on the MVC front is: No longer in BETA New components TreeView, NumericTextBox components, Calendar, DatePicker New features Grid grouping, Grid editing, Grid localization Using jQuery 1.4.2 Lots of bug fixes   The rest is mentioned in the release notes.   Breaking changes from Q1 2010 Futures!!! There is one breaking change since the Q1 2010 Futures release. The Toolbar method of the GridBuilder has been renamed to ToolBar: <%= Html.Telerik().Grid(Model) //.Toolbar(commands => commands.Insert()) <- Old .ToolBar(commands => commands.Insert()) // <- New%> For a complete list of changed API of the grid check the changes and backward compatibility help topic.   By the way if you still havent cast your vote for a new product or feature do it now! We will soon start development for Q2 2010.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Telerik Extensions for ASP.NET MVC Q1 2010 is out!

  Today we shipped the Q1 2010 release out of the door. Go download the open source or if you are a licensed customer download it from your client.net account.   What is new on the MVC front is: No longer in BETA New components TreeView, NumericTextBox components, Calendar, DatePicker New features Grid grouping, Grid editing, Grid localization Using jQuery 1.4.2 Lots of bug fixes   The rest is mentioned in the release notes.   Breaking changes from Q1 2010 Futures!!! There is one breaking change since the Q1 2010 Futures release. The Toolbar method of the GridBuilder has been renamed to ToolBar: <%= Html.Telerik().Grid(Model) //.Toolbar(commands => commands.Insert()) <- Old .ToolBar(commands => commands.Insert()) // <- New%> For a complete list of changed API of the grid check the changes and backward compatibility help topic.   By the way if you still havent cast your vote for a new product or feature do it now! We will soon start development for Q2 2010.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >