Search Results

Search found 3172 results on 127 pages for 'middle earth'.

Page 115/127 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

• WebLogic JDBC Use of Oracle Wallet for SSL

  - by Steve Felts

  Introduction Secure Sockets Layer (SSL) can be used to secure the connection between the middle tier “client”, WebLogic Server (WLS) in this case, and the Oracle database server.  Data between WLS and database can be encrypted.  The server can be authenticated so you have proof that the database can be trusted by validating a certificate from the server.  The client can be authenticated so that the database only accepts connections from clients that it trusts. Similar to the discussion in an earlier article about using the Oracle wallet for database credentials, the Oracle wallet can also be used with SSL to store the keys and certificates.  By using it correctly, clear text passwords can be eliminated from the JDBC configuration and client/server configuration can be simplified by sharing the wallet across multiple datasources. There is a very good Oracle Technical White Paper on using SSL with the Oracle thin driver at http://www.oracle.com/technetwork/database/enterprise-edition/wp-oracle-jdbc-thin-ssl-130128.pdf [LINK1].  The link http://www.oracle.com/technetwork/middleware/weblogic/index-087556.html [LINK2] describes how to use WebLogic Server with Oracle JDBC Driver SSL. The information in this article is a guide on what steps need to be taken in the variety of available options; use the links above for details. SSL from the driver to the database server is basically turned on by specifying a protocol of “tcps” in the URL.  However, there is a fair amount of setup needed.  Also remember that there is an overhead in performance. Creating the wallets The common use cases are 1. “data encryption and server-only authentication”, requiring just a trust store, or 2. “data encryption and authentication of both tiers” (client and server), requiring a trust store and a key store. It is recommended to use the auto-login wallet type so that clear text passwords are not needed in the datasource configuration to open the wallet.  The store type for an auto-login wallet is “SSO” (Single Sign On), not “JKS” or “PKCS12” as in [LINK2].  The file name is “cwallet.sso”. Wallets are created using the orapki tool.  They need to be created based on the usage (encryption and/or authentication).  This is discussed in detail in [LINK1] in Appendix B or in the Advanced Security Administrator’s Guide of the Database documentation. Database Server Configuration It is necessary to update the sqlnet.ora and listener.ora files with the directory location of the wallet using WALLET_LOCATION.  These files also indicate whether or not SSL_CLIENT_AUTHENTICATION is being used (true or false). The Oracle Listener must also be configured to use the TCPS protocol.  The recommended port is 2484. LISTENER = (ADDRESS_LIST= (ADDRESS=(PROTOCOL=tcps)(HOST=servername)(PORT=2484))) WebLogic Server Classpath The WebLogic Server CLASSPATH must have three additional security files. The files that need to be added to the WLS CLASSPATH are $MW_HOME/modules/com.oracle.osdt_cert_1.0.0.0.jar $MW_HOME/modules/com.oracle.osdt_core_1.0.0.0.jar $MW_HOME/modules/com.oracle.oraclepki_1.0.0.0.jar One way to do this is to add them to PRE_CLASSPATH environment variable for use with the standard WebLogic scripts. Setting the Oracle Security Provider It’s necessary to enable the Oracle PKI provider on the client side.  This can either be done statically by updating the java.security file under the JRE or dynamically by setting it in a WLS startup class using java.security.Security.insertProviderAt(new oracle.security.pki.OraclePKIProvider (), 3); See the full example of the startup class in [LINK2]. Datasource Configuration When creating a WLS datasource, set the PROTOCOL in the URL to tcps as in the following. jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=host)(PORT=port))(CONNECT_DATA=(SERVICE_NAME=myservice))) For encryption and server authentication, use the datasource connection properties: - javax.net.ssl.trustStore=location of wallet file on the client - javax.net.ssl.trustStoreType=”SSO” For client authentication, use the datasource connection properties: - javax.net.ssl.keyStore=location of wallet file on the client - javax.net.ssl.keyStoreType=”SSO” Note that the driver connection properties for the wallet require a file name, not a directory name. Active GridLink ONS over SSL For completeness, there is another SSL usage for WLS datasources.  The communication with the Oracle Notification Service (ONS) for load balancing information and node up/down events can use SSL also. Create an auto-login wallet and use the wallet on the client and server.  The following is a sample sequence to create a test wallet for use with ONS. orapki wallet create -wallet ons -auto_login -pwd ONS_Wallet orapki wallet add -wallet ons -dn "CN=ons_test,C=US" -keysize 1024 -self_signed -validity 9999 -pwd ONS_Wallet orapki wallet export -wallet ons -dn "CN=ons_test,C=US" -cert ons/cert.txt -pwd ONS_Wallet On the database server side, it’s necessary to define the walletfile directory in the file $CRS_HOME/opmn/conf/ons.config and run onsctl stop/start. When configuring an Active GridLink datasource, the connection to the ONS must be defined.  In addition to the host and port, the wallet file directory must be specified.  By not giving a password, a SSO wallet is assumed. Summary To use SSL with the Oracle thin driver without any clear text passwords, use an SSO Oracle Wallet.  SSL support in the Oracle thin driver is available starting in 10g Release 2.

  Read the article

• Thought Oracle Usability Advisory Board Was Stuffy? Wrong. Justification for Attending OUAB: ROI

  - by ultan o'broin

  Looking for reasons tell your boss why your organization needs to join the Oracle Usability Advisory Board or why you need approval to attend one of its meetings (see the requirements)? Try phrases such as "Continued Return on Investment (ROI)", "Increased Productivity" or "Happy Workers". With OUAB your participation is about realizing and sustaining ROI across the entire applications life-cycle from input to designs to implementation choices and integration, usage and performance and on measuring and improving the onboarding and support experience. If you think this is a boring meeting of middle-aged people sitting around moaning about customizing desktop forms and why the BlackBerry is here to stay, think again! How about this for a rich agenda, all designed to engage the audience in a thought-provoking and feedback-illiciting day of swirling interactions, contextual usage, global delivery, mobility, consumerizationm, gamification and tailoring your implementation to reflect real users doing real work in real environments.  Foldable, rollable ereader devices provide a newspaper-like UK for electronic news. Or a way to wrap silicon chips, perhaps. Explored at the OUAB Europe Meeting (photograph from Terrace Restaurant in TVP. Nom.) At the 7 December 2012 OUAB Europe meeting in Oracle Thames Valley Park, UK, Oracle partners and customers stepped up to the mic and PPT decks with a range of facts and examples to astound any UX conference C-level sceptic. Over the course of the day we covered much ground, but it was all related in a contextual, flexibile, simplication, engagement way aout delivering results for business: that means solving problems. This means being about the user and their tasks and how to make design and technology transforms work into a productive activity that users and bean counters will be excited by. The sessions really gelled for me: 1. Mobile design patterns and the powerful propositions for customers and partners offered by using the design guidance with Oracle ADF Mobile. Customers' and partners' developers existing ADF developers are now productive, efficient ADF Mobile developers applying proven UX guidance using ADF Mobile components and other Oracle Fusion Middleware in the development toolkit. You can find the Mobile UX Design Patterns and Guidance on Building Mobile Apps on OTN. 2. Oracle Voice and Apps. How this medium offers so much potentual in the enterprise and offers a window in Fusion Apps cloud webservices, Oracle RightNow NLP and Nuance technology. Exciting stuff, demoed live on a mobile phone. Stay tuned for more features and modalities and how you can tailor your own apps experience.  3. Oracle RightNow Natural Language Processing (NLP) Virtual Assistant technology (Ella): how contextual intervention and learning from users sessions delivers a great personalized UX for users interacting with Ella, a fifth generation VA to solve problems and seek knowledge. 4. BYOD Keynote: A balanced keynote address contrasting Fujitsu's explaining of the conceprt, challenges, and trends and setting the expectation that BYOD must be embraced in a flexible way,  with the resolute, crafted high security enterprise requirements that nuancing the BYOD concept and proposals with the realities of their world of water tight information and device sharing policies. Fascinating stuff, as well providing anecdotes to make us thing about out own DYOD Deployments. One size does not fit all. 5. Icon Cultural Surveys Results and Insights Arising: Ever wondered about the cultural appropriateness of icons used in software UIs and how these icons assessed for global use? Or considered that social media "Like" icons might be  unacceptable hand gestures in culture or enterprise? Or do the old world icons like Save floppy disk icons still find acceptable? Well the survey results told you. Challenges must be tested, over time, and context of use is critical now, including external factors such as the internet and social media adoption. Indeed the fears about global rejection of the face and hand icons was not borne out, and some of the more anachronistic icons (checkbooks, microphones, real-to-real tape decks, 3.5" floppies for "save") have become accepted metaphors for current actions. More importantly the findings brought into focus the reason for OUAB - engage with and illicit feedback though working groups before we build anything. 6. EReaders and Oracle iBook: What is the uptake and trends of ereaders? And how about a demo of an iBook with enterprise apps content?  Well received by the audience, the session included a live running poll of ereader usage. 7. Gamification Design Jam: Fun, hands on event for teams of Oracle staff, partners and customers, actually building gamified flows, a practice that can be applied right away by customers and partners.  8. UX Direct: A new offering of usability best practices, coming to an external website for you in 2013. FInd a real user, observe their tasks, design and approve, build and measure. Simple stuff to improve apps implications no end. 9. FUSE (an internal term only, basically Fusion Simplified Experience): demo of the new Face of Fusion Applications: inherently mobile, simple to use, social, personalizable and FAST, three great demos from the HCM, CRM and ICT world on how these UX designs can be used in different ways. So, a powerful breadth and depth of UX solutions and opporunities for customers and partners to engage with and explore how they can make their users happy and benefit their business reaping continued ROI from those apps investments. Find out more about the OUAB and how to get involved here ... 

  Read the article

• Updating a database connection password using a script

  - by Tim Dexter

  An interesting customer requirement that I thought was worthy of sharing today. Thanks to James for the requirement and Bryan for the proposed solution and me for testing the solution and proving it works :0) A customers implementation of Sarbanes Oxley requires them to change all database account passwords every 90 days. This is scripted leveraging shell scripts today for most of their environments. But how can they manage the BI Publisher connections? Now, the customer is running 11g and therefore using weblogic on the middle tier, which is the first clue to Bryans proposed solution. To paraphrase and embellish Bryan's solution a little; why not use a JNDI connection from BIP to the database. Then employ the web logic scripting engine to make updates to the JNDI as needed? BIP is completely uninvolved and with a little 'timing' users will be completely unaware of the password updates i.e. change the password when reports are not being executed. Perfect! James immediately tracked down the WLST script that could be used here, http://middlewaremagic.com/weblogic/?p=4261 (thanks Ravish) Now it was just a case of testing the theory. Some steps: Create the JNDI connection in WLS Create the JNDI connection in BI Publisher pointing to the WLS connection Build new data models using or re-point data sources to use the JNDI connection. Create the WLST script to update the WLS JNDI password as needed. Test! Some details. Creating the JNDI connection in web logic is pretty straightforward. Log into hte console and look for Data Sources under the Services section of the home page and click it Click New >> Generic Datasource Give the connection a name. For the JNDI name, prefix it with 'jdbc/' so I have 'jdbc/localdb' - this name is important you'll need it on the BIP side. Select your db type - this will influence the drivers and information needed on the next page. Being a company man, Im using an Oracle db. Click Next Select the driver of choice, theres lots I know, you can read about them I just chose 'Oracle's Driver (Thin) for Instance connections; Versions 9.0.1 and later' Click Next >> Next Fill out the db name (SID), server, port, username to connect and password >> Next Test the config to ensure you can connect. >> Next Now you need to deploy the connection to your BI server, select it and click Next. You're done with the JNDI config. Creating the JNDI connection on the Publisher side is covered here. Just remember to the connection name you created in WLS e.g. 'jdbc/localdb' Not gonna tell you how to do this, go read the user guide :0) Suffice to say, it works. This requires a little reading around the subject to understand the scripting engine and how to execute scripts. Nicely covered here. However a bit of googlin' and I found an even easier way of running the script. ${ServerHome}/common/bin/wlst.sh updatepwd.py Where updatepwd.py is my script file, it can be in another directory. As part of the wlst.sh script your environment is set up for you so its very simple to execute. The nitty gritty: Need to take Ravish's script above and create a file with a .py extension. Its going to need some modification, as he explains on the web page, to make it work in your environment. I played around with it for a while but kept running into errors. The script as is, tries to loop through all of your connections and modify the user and passwords for each. Not quite what we are looking for. Remember our requirement is to just update the password for a given connection. I also found another issue with the script. WLS 10.x does not allow updates to passwords using clear type ie un-encrypted text while the server is in production mode. Its a bit much to set it back to developer mode bounce it, change the passwords and then bounce and then change back to production and bounce again. After lots of messing about I finally came up with the following: ############################################################################# # # Update password for JNDI connections # ############################################################################# print("*** Trying to Connect.... *****") connect('weblogic','welcome1','t3://localhost:7001') print("*** Connected *****") edit() startEdit() print ("*** Encrypt the password ***") en = encrypt('hr') print "Encrypted pwd: ", en print ("*** Changing pwd for LocalDB ***") dsName = 'LocalDB' print 'Changing Password for DataSource ', dsName cd('/JDBCSystemResources/'+dsName+'/JDBCResource/'+dsName+'/JDBCDriverParams/'+dsName) set('PasswordEncrypted',en) save() activate() Its pretty simple and you can expand on it to loop through the data sources and change each as needed. I have hardcoded the password into the file but you can pass it as a parameter as needed using the properties file method. Im not going to get into the detail of that here but its covered with an example here. Couple of points to note: 1. The change to the password requires a server bounce to get the changes picked up. You can add that to the shell script you will use to call the script above. 2. The script above needs to be run from the MW_HOME\user_projects\domains\bifoundation_domain directory to get the encryption libraries set correctly. My command to run the whole script was: d:\oracle\bi_mw\wlserver_10.3\common\bin\wlst.cmd updatepwd.py - where wlst.cmd is the scripting command line and updatepwd.py was my update password script above. I have not quite spoon fed everything you need to make it a robust script but at least you know you can do it and you can work out the rest I think :0)

  Read the article

• A Visual Studio Release Grows in Brooklyn

  - by andrewbrust

  Yesterday, Microsoft held its flagship launch event for Office 2010 in Manhattan.  Today, the Redmond software company is holding a local launch event for Visual Studio (VS) 2010, in Brooklyn.  How come information workers get the 212 treatment and developers are relegated to 718? Well, here’s the thing: the Brooklyn Marriott is actually a great place for an event, but you need some intimate knowledge of New York City to know that.  NBC’s Studio 8H, where the Office launch was held yesterday (and from where SNL is broadcast) is a pretty small venue, but you’d need some inside knowledge to recognize that.  Likewise, while Office 2010 is a product whose value is apparent.  Appreciating VS 2010’s value takes a bit more savvy.  Setting aside its year-based designation, this release of VS, counting the old Visual Basic releases, is the 10th version of the product.  How can a developer audience get excited about an integrated development environment when it reaches double-digit version numbers?  Well, it can be tough.  Luckily, Microsoft sent Jay Schmelzer, a Group Program Manager from the Visual Studio team in Redmond, to come tell the Brooklyn audience why they should be excited. Turns out there’s a lot of reasons.  Support fro SharePoint development is a big one.  In previous versions of VS, that support has been anemic, at best.  Shortage of SharePoint developers is a huge issue in the industry, and this should help.  There’s also built in support for Windows Azure (Microsoft’s cloud platform) and, through a download, support for the forthcoming Windows Phone 7 platform.  ASP.NET MVC, a “close-to-the-metal” Web development option that does away with the Web Forms abstraction layer, has a first-class presence in VS.  So too does jQuery, the Open Source environment that makes JavaScript development a breeze.  The jQuery support is so good that Microsoft now contributes to that Open Source project and offers IntelliSense support for it in the code editor. Speaking of the VS code editor, it now supports multi-monitor setups, zoom-in, and block selection.  If you’re not a developer, this may sound confusing and minute.  I’ll just say that for people who are developers these are little things that really contribute to productivity, and that translates into lower development costs. The really cool demo, though, was around Visual Studio 2010’s new debugging features.  This stuff is hard to showcase, but I believe it’s truly breakthrough technology: imagine being able to step backwards in time to see what might have caused a bug.  Cool?  Now imagine being able to do that, even if you weren’t the tester and weren’t present while the testing was being done.  Then imagine being able to see a video screen capture of what the tester was doing with your app when the bug occurred.  VS 2010 allows all that.  This could be the demise of the IWOMM (“it works on my machine”) syndrome. After the keynote, I asked Schmelzer if any of Microsoft’s competitors have debugging tools that come close to VS 2010’s.  His answer was an earnest “we don’t think so.”  If that’s true, that’s a big deal, and a huge advantage for developer teams who adopt it.  It will make software development much cheaper and more efficient.  Kind of like holding a launch event at the Brooklyn Marriott instead of 30 Rock in Manhattan! VS 2010 (version 10) and Office 2010 (version 14) aren’t the only new product versions Microsoft is releasing right now.  There’s also SQL Server 2008 R2 (version 10.5), Exchange 2010 (version 8, I believe), SharePoint 2010 (version 4) and, of course, Windows 7.  With so many new versions at such levels of maturity, I think it’s fair to say Microsoft has reached middle-age.  How does a company stave off a potential mid-life crisis, especially when with young Turks like Google coming along and competing so fiercely?  Hard to say.  But if focusing on core value, including value that’s hard to play into a sexy demo, is part oft the answer, then Microsoft’s doing OK.  And if some new tricks, like Windows Phone 7, can gain some traction, that might round things out nicely. Are the legacy products old tricks, or are they revised classics?  I honestly don’t know, because it’s the market’s prerogative to pass that judgement.  I can say this though: based on today’s show, I think Microsoft’s been doing its homework.

  Read the article

• How to tell whether your programmers are under-performing?

  - by A Team Lead

  I am a team lead with 5+ developers. I have a developer (let's call him A) who is a good programmer, who writes good clean, easy to understand code. However he is somewhat difficult to manage, and sometimes I wonder whether he is really under-performing or not. Our company requires the developers to indicate the work progress in the bug tracker we use, not so much as to monitor the programmers but to let the stackholders know the progress. The thing is, A only updates a task progress when it is done ( maybe 3 weeks after it is first worked on) and this leaves everyone wondering what is going on in the middle of the development week. He wouldn't change his habit despite repeated probing. ( It's OK, developers hate paperwork, I do, too) Recent 2-3 months he on leave quite often due to various events-- either he is sick, or have to attend a lot of personal events etc. ( It's OK, bad things happen in a string. It's just a coincidence) We define sprints, or roadmaps for each month. And in the beginning of the sprint, we will discuss the amount of work each of the developers have to do in a sprint and the developers get to set the amount of time they need for each task. He usually won't be able to complete all of them. (It's OK, the developers are regularly missing deadlines not due to their fault). If only one or two of the above events happen, I won't feel that A is under-performing, but they all happen together. So I have the feeling that A is under-performing and maybe-- God forbid--- slacking off. This is just a feeling based on my years of experience as programmer. But I could be wrong. It is notoriously hard to measure the work of a programmer, given that not all two tasks are alike, and there lacks a standard objective to measure the commitment of a programmer to your company. It is downright impossible to tell whether the programmer is doing his job or slacking off. All you can do, is to trust them-- yeah, trusting and giving them autonomy is the best way for programmers to work, I know that, so don't start a lecture on why you need to trust your programmers, thank you every much-- but if they abuse your trust, can you know? My question is, how can you tell whether your programmers are under-performing? Surely there are experience team leads who know better than me on this? Outcome: I've a straight talk with him regarding my perception on his performance. He was indignant when I suggested that I had the feeling that he wasn't performing at his best level. He felt that this was a completely unfair feeling. I then replied that this was my feeling and I didn't know whether my feeling was right or not. He would have none of this and ended the discussion immediately. Before he left he said that he "would try to give more to the company" in a very cold tone. I was taken aback by his reaction. I am sure that I offended him in some ways. Not too sure whether that was the right thing to do for me to be so frank with him, though. Extra notes: I hate micromanaging. So all that we have for our software process is Sprint ( where tasks get prioritized and assigned, and at the end of the month, a review of the amount of work done). Developers would require to update the tasks as they go along everyday. There is no standup meeting, or anything of the sort. Mainly because we have the freedom to work from home and everyone cherishes this freedom. Although I am the one who sets the deadline, but the developers will provide the estimate for each tasks and I will decide-- based on the estimate-- the tasks that go into a particular sprint. If they can't finish the tasks at the end of the sprint, I will push them to the next. So theoretically one can just do only 1 or 2 tasks during the whole sprint and then push the remaining 99 tasks to the next sprint and still he will be fine as long as justifies this-- in the form of daily work progress updates

  Read the article

• GameplayScreen does not contain a definition for GraphicsDevice

  - by Dave Voyles

  Long story short: I'm trying to intergrate my game with Microsoft's Game State Management. In doing so I've run into some errors, and the latest one is in the title. I'm not able to display my HUD for the reasons listed above. Previously, I had much of my code in my Game.cs class, but the GSM has a bit of it in Game1, and most of what you have drawn for the main screen in your GameplayScreen class, and that is what is causing confusion on my part. I've created an instance of the GameplayScreen class to be used in the HUD class (as you can see below). Before integrating with the GSM however, I created an instance of my Game class, and all worked fine. It seems that I need to define my graphics device somewhere, but I am not sure of where exactly. I've left some code below to help you understand. public class GameStateManagementGame : Microsoft.Xna.Framework.Game { #region Fields GraphicsDeviceManager graphics; ScreenManager screenManager; // Creates a new intance, which is used in the HUD class public static Game Instance; // By preloading any assets used by UI rendering, we avoid framerate glitches // when they suddenly need to be loaded in the middle of a menu transition. static readonly string[] preloadAssets = { "gradient", }; #endregion #region Initialization /// <summary> /// The main game constructor. /// </summary> public GameStateManagementGame() { Content.RootDirectory = "Content"; graphics = new GraphicsDeviceManager(this); graphics.PreferredBackBufferWidth = 1280; graphics.PreferredBackBufferHeight = 720; graphics.IsFullScreen = false; graphics.ApplyChanges(); // Create the screen manager component. screenManager = new ScreenManager(this); Components.Add(screenManager); // Activate the first screens. screenManager.AddScreen(new BackgroundScreen(), null); //screenManager.AddScreen(new MainMenuScreen(), null); screenManager.AddScreen(new PressStartScreen(), null); } namespace Pong { public class HUD { public void Update(GameTime gameTime) { // Used in the Draw method titleSafeRectangle = new Rectangle (GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.X, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Y, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Width, GameplayScreen.Instance.GraphicsDevice.Viewport.TitleSafeArea.Height); } } } class GameplayScreen : GameScreen { #region Fields ContentManager content; public static GameStates gamestate; private GraphicsDeviceManager graphics; public int screenWidth; public int screenHeight; private Texture2D backgroundTexture; private SpriteBatch spriteBatch; private Menu menu; private SpriteFont arial; private HUD hud; Animation player; // Creates a new intance, which is used in the HUD class public static GameplayScreen Instance; public GameplayScreen() { TransitionOnTime = TimeSpan.FromSeconds(1.5); TransitionOffTime = TimeSpan.FromSeconds(0.5); } protected void Initialize() { lastScored = false; menu = new Menu(); resetTimer = 0; resetTimerInUse = true; ball = new Ball(content, new Vector2(screenWidth, screenHeight)); SetUpMulti(); input = new Input(); hud = new HUD(); // Places the powerup animation inside of the surrounding box // Needs to be cleaned up, instead of using hard pixel values player = new Animation(content.Load<Texture2D>(@"gfx/powerupSpriteSheet"), new Vector2(103, 44), 64, 64, 4, 5); // Used by for the Powerups random = new Random(); vec = new Vector2(100, 50); vec2 = new Vector2(100, 100); promptVec = new Vector2(50, 25); timer = 10000.0f; // Starting value for the cooldown for the powerup timer timerVector = new Vector2(10, 10); //JEP - one time creation of powerup objects playerOnePowerup = new Powerup(); playerOnePowerup.Activated += PowerupActivated; playerOnePowerup.Deactivated += PowerupDeactivated; playerTwoPowerup = new Powerup(); playerTwoPowerup.Activated += PowerupActivated; playerTwoPowerup.Deactivated += PowerupDeactivated; //JEP - moved from events since these only need set once activatedVec = new Vector2(100, 125); deactivatedVec = new Vector2(100, 150); powerupReady = false; }

  Read the article

• Extended FindWindow

  - by João Angelo

  The Win32 API provides the FindWindow function that supports finding top-level windows by their class name and/or title. However, the title search does not work if you are trying to match partial text at the middle or the end of the full window title. You can however implement support for these extended search features by using another set of Win32 API like EnumWindows and GetWindowText. A possible implementation follows: using System; using System.Collections.Generic; using System.Linq; using System.Runtime.InteropServices; using System.Text; public class WindowInfo { private IntPtr handle; private string className; internal WindowInfo(IntPtr handle, string title) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); this.Handle = handle; this.Title = title ?? string.Empty; } public string Title { get; private set; } public string ClassName { get { if (className == null) { className = GetWindowClassNameByHandle(this.Handle); } return className; } } public IntPtr Handle { get { if (!NativeMethods.IsWindow(this.handle)) throw new InvalidOperationException("The handle is no longer valid."); return this.handle; } private set { this.handle = value; } } public static WindowInfo[] EnumerateWindows() { var windows = new List<WindowInfo>(); NativeMethods.EnumWindowsProcessor processor = (hwnd, lParam) => { windows.Add(new WindowInfo(hwnd, GetWindowTextByHandle(hwnd))); return true; }; bool succeeded = NativeMethods.EnumWindows(processor, IntPtr.Zero); if (!succeeded) return new WindowInfo[] { }; return windows.ToArray(); } public static WindowInfo FindWindow(Predicate<WindowInfo> predicate) { WindowInfo target = null; NativeMethods.EnumWindowsProcessor processor = (hwnd, lParam) => { var current = new WindowInfo(hwnd, GetWindowTextByHandle(hwnd)); if (predicate(current)) { target = current; return false; } return true; }; NativeMethods.EnumWindows(processor, IntPtr.Zero); return target; } private static string GetWindowTextByHandle(IntPtr handle) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); int length = NativeMethods.GetWindowTextLength(handle); if (length == 0) return string.Empty; var buffer = new StringBuilder(length + 1); NativeMethods.GetWindowText(handle, buffer, buffer.Capacity); return buffer.ToString(); } private static string GetWindowClassNameByHandle(IntPtr handle) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); const int WindowClassNameMaxLength = 256; var buffer = new StringBuilder(WindowClassNameMaxLength); NativeMethods.GetClassName(handle, buffer, buffer.Capacity); return buffer.ToString(); } } internal class NativeMethods { public delegate bool EnumWindowsProcessor(IntPtr hwnd, IntPtr lParam); [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool EnumWindows( EnumWindowsProcessor lpEnumFunc, IntPtr lParam); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetWindowText( IntPtr hWnd, StringBuilder lpString, int nMaxCount); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetWindowTextLength(IntPtr hWnd); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetClassName( IntPtr hWnd, StringBuilder lpClassName, int nMaxCount); [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool IsWindow(IntPtr hWnd); } The access to the windows handle is preceded by a sanity check to assert if it’s still valid, but if you are dealing with windows out of your control then the window can be destroyed right after the check so it’s not guaranteed that you’ll get a valid handle. Finally, to wrap this up a usage, example: static void Main(string[] args) { var w = WindowInfo.FindWindow(wi => wi.Title.Contains("Test.docx")); if (w != null) { Console.Write(w.Title); } }

  Read the article

• XmlWriter and lower ASCII characters

  - by Rick Strahl

  Ran into an interesting problem today on my CodePaste.net site: The main RSS and ATOM feeds on the site were broken because one code snippet on the site contained a lower ASCII character (CHR(3)). I don't think this was done on purpose but it was enough to make the feeds fail. After quite a bit of debugging and throwing in a custom error handler into my actual feed generation code that just spit out the raw error instead of running it through the ASP.NET MVC and my own error pipeline I found the actual error. The lovely base exception and error trace I got looked like this: Error: '', hexadecimal value 0x03, is an invalid character. at System.Xml.XmlUtf8RawTextWriter.InvalidXmlChar(Int32 ch, Byte* pDst, Boolean entitize)at System.Xml.XmlUtf8RawTextWriter.WriteElementTextBlock(Char* pSrc, Char* pSrcEnd)at System.Xml.XmlUtf8RawTextWriter.WriteString(String text)at System.Xml.XmlWellFormedWriter.WriteString(String text)at System.Xml.XmlWriter.WriteElementString(String localName, String ns, String value)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteItemContents(XmlWriter writer, SyndicationItem item, Uri feedBaseUri)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteItem(XmlWriter writer, SyndicationItem item, Uri feedBaseUri)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteItems(XmlWriter writer, IEnumerable`1 items, Uri feedBaseUri)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteFeed(XmlWriter writer)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteTo(XmlWriter writer)at CodePasteMvc.Controllers.ApiControllerBase.GetFeed(Object instance) in C:\Projects2010\CodePaste\CodePasteMvc\Controllers\ApiControllerBase.cs:line 131 XML doesn't like extended ASCII Characters It turns out the issue is that XML in general does not deal well with lower ASCII characters. According to the XML spec it looks like any characters below 0x09 are invalid. If you generate an XML document in .NET with an embedded &#x3; entity (as mine did to create the error above), you tend to get an XML document error when displaying it in a viewer. For example, here's what the result of my  feed output looks like with the invalid character embedded inside of Chrome which displays RSS feeds as raw XML by default: Other browsers show similar error messages. The nice thing about Chrome is that you can actually view source and jump down to see the line that causes the error which allowed me to track down the actual message that failed. If you create an XML document that contains a 0x03 character the XML writer fails outright with the error: '', hexadecimal value 0x03, is an invalid character. The good news is that this behavior is overridable so XML output can at least be created by using the XmlSettings object when configuring the XmlWriter instance. In my RSS configuration code this looks something like this:MemoryStream ms = new MemoryStream(); var settings = new XmlWriterSettings() { CheckCharacters = false }; XmlWriter writer = XmlWriter.Create(ms,settings); and voila the feed now generates. Now generally this is probably NOT a good idea, because as mentioned above these characters are illegal and if you view a raw XML document you'll get validation errors. Luckily though most RSS feed readers however don't care and happily accept and display the feed correctly, which is good because it got me over an embarrassing hump until I figured out a better solution. How to handle extended Characters? I was glad to get the feed fixed for the time being, but now I was still stuck with an interesting dilemma. CodePaste.net accepts user input for code snippets and those code snippets can contain just about anything. This means that ASP.NET's standard request filtering cannot be applied to this content. The code content displayed is encoded before display so for the HTML end the CHR(3) input is not really an issue. While invisible characters are hardly useful in user input it's not uncommon that odd characters show up in code snippets. You know the old fat fingering that happens when you're in the middle of a coding session and those invisible characters do end up sometimes in code editors and then end up pasted into the HTML textbox for pasting as a Codepaste.net snippet. The question is how to filter this text? Looking back at the XML Charset Spec it looks like all characters below 0x20 (space) except for 0x09 (tab), 0x0A (LF), 0x0D (CR) are illegal. So applying the following filter with a RegEx should work to remove invalid characters:string code = Regex.Replace(item.Code, @"[\u0000-\u0008,\u000B,\u000C,\u000E-\u001F]", ""); Applying this RegEx to the code snippet (and title) eliminates the problems and the feed renders cleanly.© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET  XML   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Data management in unexpected places

  - by Ashok_Ora

  Normal 0 false false false EN-US X-NONE X-NONE Data management in unexpected places When you think of network switches, routers, firewall appliances, etc., it may not be obvious that at the heart of these kinds of solutions is an engine that can manage huge amounts of data at very high throughput with low latencies and high availability. Consider a network router that is processing tens (or hundreds) of thousands of network packets per second. So what really happens inside a router? Packets are streaming in at the rate of tens of thousands per second. Each packet has multiple attributes, for example, a destination, associated SLAs etc. For each packet, the router has to determine the address of the next “hop” to the destination; it has to determine how to prioritize this packet. If it’s a high priority packet, then it has to be sent on its way before lower priority packets. As a consequence of prioritizing high priority packets, lower priority data packets may need to be temporarily stored (held back), but addressed fairly. If there are security or privacy requirements associated with the data packet, those have to be enforced. You probably need to keep track of statistics related to the packets processed (someone’s sure to ask). You have to do all this (and more) while preserving high availability i.e. if one of the processors in the router goes down, you have to have a way to continue processing without interruption (the customer won’t be happy with a “choppy” VoIP conversation, right?). And all this has to be achieved without ANY intervention from a human operator – the router is most likely to be in a remote location – it must JUST CONTINUE TO WORK CORRECTLY, even when bad things happen. How is this implemented? As soon as a packet arrives, it is interpreted by the receiving software. The software decodes the packet headers in order to determine the destination, kind of packet (e.g. voice vs. data), SLAs associated with the “owner” of the packet etc. It looks up the internal database of “rules” of how to process this packet and handles the packet accordingly. The software might choose to hold on to the packet safely for some period of time, if it’s a low priority packet. Ah – this sounds very much like a database problem. For each packet, you have to minimally · Look up the most efficient next “hop” towards the destination. The “most efficient” next hop can change, depending on latency, availability etc. · Look up the SLA and determine the priority of this packet (e.g. voice calls get priority over data ftp) · Look up security information associated with this data packet. It may be necessary to retrieve the context for this network packet since a network packet is a small “slice” of a session. The context for the “header” packet needs to be stored in the router, in order to make this work. · If the priority of the packet is low, then “store” the packet temporarily in the router until it is time to forward the packet to the next hop. · Update various statistics about the packet. In most cases, you have to do all this in the context of a single transaction. For example, you want to look up the forwarding address and perform the “send” in a single transaction so that the forwarding address doesn’t change while you’re sending the packet. So, how do you do all this? Berkeley DB is a proven, reliable, high performance, highly available embeddable database, designed for exactly these kinds of usage scenarios. Berkeley DB is a robust, reliable, proven solution that is currently being used in these scenarios. First and foremost, Berkeley DB (or BDB for short) is very very fast. It can process tens or hundreds of thousands of transactions per second. It can be used as a pure in-memory database, or as a disk-persistent database. BDB provides high availability – if one board in the router fails, the system can automatically failover to another board – no manual intervention required. BDB is self-administering – there’s no need for manual intervention in order to maintain a BDB application. No need to send a technician to a remote site in the middle of nowhere on a freezing winter day to perform maintenance operations. BDB is used in over 200 million deployments worldwide for the past two decades for mission-critical applications such as the one described here. You have a choice of spending valuable resources to implement similar functionality, or, you could simply embed BDB in your application and off you go! I know what I’d do – choose BDB, so I can focus on my business problem. What will you do? /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

  Read the article

• PanelGridLayout - A Layout Revolution

  - by Duncan Mills

  With the most recent 11.1.2 patchset (11.1.2.3) there has been a lot of excitement around ADF Essentials (and rightly so), however, in all the fuss I didn't want an even more significant change to get missed - yes you read that correctly, a more significant change! I'm talking about the new panelGridLayout component, I can confidently say that this one of the most revolutionary components that we've introduced in 11g, even though it sounds rather boring. To be totally accurate, panelGrid was introduced in 11.1.2.2 but without any presence in the component palette or other design time support, so it was largely missed unless you read the release notes. However in this latest patchset it's finally front and center. Its time to explore - we (really) need to talk about layout.  Let's face it,with ADF Faces rich client, layout is a rather arcane pursuit, once you are a layout master, all bow before you, but it's more of an art than a science, and it is often, in fact, way too difficult to achieve what should (apparently) be a pretty simple. Here's a great example, it's a homework assignment I set for folks I'm teaching this stuff to:  The requirements for this layout are: The header is 80px high, the footer is 30px. These are both fixed.  The first section of the header containing the logo is 180px wide The logo is centered within the top left hand corner of the header  The title text is start aligned in the center zone of the header and will wrap if the browser window is narrowed. It should be aligned in the center of the vertical space  The about link is anchored to the right hand side of the browser with a 20px gap and again is center aligned vertically. It will move as the browser window is reduced in width. The footer has a right aligned copyright statement, again middle aligned within a 30px high footer region and with a 20px buffer to the right hand edge. It will move as the browser window is reduced in width. All remaining space is given to a central zone, which, in this case contains a panelSplitter. Expect that at some point in time you'll need a separate messages line in the center of the footer.  In the homework assigment I set I also stipulate that no inlineStyles can be used to control alignment or margins and no use of other taglibs (e.g. JSF HTML or Trinidad HTML). So, if we take this purist approach, that basic page layout (in my stock solution) requires 3 panelStretchLayouts, 5 panelGroupLayouts and 4 spacers - not including the spacer I use for the logo and the contents of the central zone splitter - phew! The point is that even a seemingly simple layout needs a bit of thinking about, particulatly when you consider strechting and browser re-size behavior. In fact, this little sample actually teaches you much of what you need to know to become vaguely competant at layouts in the framework. The underlying result of "the way things are" is that most of us reach for panelStretchLayout before even finishing the first sip of coffee as we embark on a new page design. In fact most pages you will see in any moderately complex ADF page will basically be nested panelStretchLayouts and panelGroupLayouts, sometimes many, many levels deep. So this is a problem, we've known this for some time and now we have a good solution. (I should point out that the oft-used Trinidad trh tags are not a particularly good solution as you're tie-ing yourself to an HTML table based layout in that case with a host of attendent issues in resize and bi-di behavior, but I digress.) So, tadaaa, I give to you panelGridLayout. PanelGrid, as the name suggests takes a grid like (dare I say slightly gridbag-like) approach to layout, dividing your layout into rows and colums with margins, sizing, stretch behaviour, colspans and rowspans all rolled in, all without the use of inlineStyle. As such, it provides for a much more powerful and consise way of defining a layout such as the one above that is actually simpler and much more logical to design. The basic building blocks are the panelGridLayout itself, gridRow and gridCell. Your content sits inside the cells inside the rows, all helpfully allowing both streching, valign and halign definitions without the need to nest further panelGroupLayouts. So much simpler!  If I break down the homework example above my nested comglomorate of 12 containers and spacers can be condensed down into a single panelGrid with 3 rows and 5 cell definitions (39 lines of source reduced to 24 in the case of the sample). What's more, the actual runtime representation in the browser DOM is much, much simpler, and clean, with basically one DIV per cell (Note that just because the panelGridLayout semantics looks like an HTML table does not mean that it's rendered that way!) . Another hidden benefit is the runtime cost. Because we can use a single layout to achieve much more complex geometries the client side layout code inside the browser is having to work a lot less. This will be a real benefit if your application needs to run on lower powered clients such as netbooks or tablets. So, it's time, if you're on 11.1.2.2 or above, to smile warmly at your panelStretchLayouts, wrap the blanket around it's knees and wheel it off to the Sunset Retirement Home for a well deserved rest. There's a new kid on the block and it wants to be your friend. 

  Read the article

• WEBLOGIC 12C HANDS-ON BOOTCAMP

  - by agallego

    Oracle PartnerNetwork | Account | Feedback   JOIN THE ORACLE WEBLOGIC PARTNER COMMUNITY AND ATTEND A WEBLOGIC 12C HANDS-ON BOOTCAMP Dear partner As a valued partner we would like to invite you for the WebLogic Partner Community and our WebLogic 12c hands-on Bootcamps – free of charge! Please first login at http://partner.oracle.com and then visit: WebLogic Partner Community. (If you need support with your account please contact the Oracle Partner Business Center). The goal of the WebLogic Partner Community is to provide you with the latest information on Oracle's offerings and to facilitate the exchange of experience within community members. Register Now FREE Assessment vouchers to become certified and WebLogic Server 12c 200 new Features and Training Connect and Network   WebLogic Blogs   WebLogic on Facebook   WebLogic on LinkedIn   WebLogic on Twitter   WebLogic on Oracle Mix WebLogic 12c hands-on Workshops We offer free3 days hands-on WebLogic 12c workshops for Oracle partners who want to become Application Grid Specialized: Register Here! Country Date Location Registration   Germany  3-5 April 2012 Oracle Düsseldorf Click here   France  24-26 April 2012 Oracle Colombes Click here   Spain 08-10 May 2012  Oracle Madrid  Click here   Netherlands  22-24 May 2012  Oracle Amsterdam  Click here   United Kingdom  06-08 June 2012  Oracle Reading  Click here   Italy  19-21 June 2012  Oracle Cinisello Balsamo  Click here   Portugal  10-12 July 2012  Oracle Lisbon  Click here Skill requirements Attendees need to have the following skills as this is required by the product-set and to make sure they get the most out of the training: Basic knowledge in Java and JavaEE Understanding the Application Server concept Basic knowledge in older releases of WebLogic Server would be beneficial Member of WebLogic Partner Community for registration please vist http://www.oracle.com/partners/goto/wls-emea Hardware requirements Every participant works on his own notebook. The minimal hardware requirements are: 4Gb physical RAM (we will boot the image with 2Gb RAM)  dual core CPU 15 GB HD Software requirements Please install Oracle VM VirtualBox 4.1.8 Follow-up and certification  With the workshop registration you agree to the following next steps Follow-up training attend and pass the Oracle Application Grid Certified Implementation Specialist Registration For details and registration please visit Register Here Free WebLogic Certification (Free assessment voucher to become certified) For all WebLogic experts, we offer free vouchers worth $195 for the Oracle Application Grid Certified Implementation Specialist assessment. To demonstrate your WebLogic knowledge you first have to pass the free online assessment Oracle Application Grid PreSales Specialist. For free vouchers, please send an e-mail with the screenshot of your Oracle Application Grid PreSales certirficate to [email protected] including your Name, Company, E-mail and Country. Note: This offer is limited to partners from Europe Middle East and Africa. Partners from other countries please contact your Oracle partner manager. WebLogic Specialization To become specialized in Application Grid, please make sure that you access the: Application Grid Specialization Guide Application Grid Specialization Checklist If you have any questions please contact the Oracle Partner Business Center. Oracle WebLogic Server 12c Key New Capabilities Java EE 6 and Developer Productivity Simplified Deployment and Management with Virtualization Integrated Traffic Management Enhanced High Availability and Disaster Recovery Much Higher Performance For more information please visit: Presentation from the WebLogic 12c launch Technical Presentation from the WebLogic 12c launch WebLogic OTN Website WebLogic 12c Virtual Conference Environment WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea (OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Best regards, Jürgen Kress WebLogic Partner Adoption EMEA Tel. +49 89 1430 1479 E-Mail: [email protected]   Copyright © 2012, Oracle and/or its affiliates. All rights reserved. Contact PBC | Legal Notices and Terms of Use | Privacy Statement Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States Your privacy is important to us. You can login to your account to update your e-mail subscriptions or you can opt-out of all Oracle Marketing e-mails at any time. Please note that opting-out of Marketing communications does not affect your receipt of important business communications related to your current relationship with Oracle such as Security Updates, Event Registration notices, Account Management and Support/Service communications.

  Read the article

• High Availability for IaaS, PaaS and SaaS in the Cloud

  - by BuckWoody

  Outages, natural disasters and unforeseen events have proved that even in a distributed architecture, you need to plan for High Availability (HA). In this entry I'll explain a few considerations for HA within Infrastructure-as-a-Service (IaaS), Platform-as-a-Service (PaaS) and Software-as-a-Service (SaaS). In a separate post I'll talk more about Disaster Recovery (DR), since each paradigm has a different way to handle that. Planning for HA in IaaS IaaS involves Virtual Machines - so in effect, an HA strategy here takes on many of the same characteristics as it would on-premises. The primary difference is that the vendor controls the hardware, so you need to verify what they do for things like local redundancy and so on from the hardware perspective. As far as what you can control and plan for, the primary factors fall into three areas: multiple instances, geographical dispersion and task-switching. In almost every cloud vendor I've studied, to ensure your application will be protected by any level of HA, you need to have at least two of the Instances (VM's) running. This makes sense, but you might assume that the vendor just takes care of that for you - they don't. If a single VM goes down (for whatever reason) then the access to it is lost. Depending on multiple factors, you might be able to recover the data, but you should assume that you can't. You should keep a sync to another location (perhaps the vendor's storage system in another geographic datacenter or to a local location) to ensure you can continue to serve your clients. You'll also need to host the same VM's in another geographical location. Everything from a vendor outage to a network path problem could prevent your users from reaching the system, so you need to have multiple locations to handle this. This means that you'll have to figure out how to manage state between the geo's. If the system goes down in the middle of a transaction, you need to figure out what part of the process the system was in, and then re-create or transfer that state to the second set of systems. If you didn't write the software yourself, this is non-trivial. You'll also need a manual or automatic process to detect the failure and re-route the traffic to your secondary location. You could flip a DNS entry (if your application can tolerate that) or invoke another process to alias the first system to the second, such as load-balancing and so on. There are many options, but all of them involve coding the state into the application layer. If you've simply moved a state-ful application to VM's, you may not be able to easily implement an HA solution. Planning for HA in PaaS Implementing HA in PaaS is a bit simpler, since it's built on the concept of stateless applications deployment. Once again, you need at least two copies of each element in the solution (web roles, worker roles, etc.) to remain available in a single datacenter. Also, you need to deploy the application again in a separate geo, but the advantage here is that you could work out a "shared storage" model such that state is auto-balanced across the world. In fact, you don't have to maintain a "DR" site, the alternate location can be live and serving clients, and only take on extra load if the other site is not available. In Windows Azure, you can use the Traffic Manager service top route the requests as a type of auto balancer. Even with these benefits, I recommend a second backup of storage in another geographic location. Storage is inexpensive; and that second copy can be used for not only HA but DR. Planning for HA in SaaS In Software-as-a-Service (such as Office 365, or Hadoop in Windows Azure) You have far less control over the HA solution, although you still maintain the responsibility to ensure you have it. Since each SaaS is different, check with the vendor on the solution for HA - and make sure you understand what they do and what you are responsible for. They may have no HA for that solution, or pin it to a particular geo, or perhaps they have a massive HA built in with automatic load balancing (which is often the case).   All of these options (with the exception of SaaS) involve higher costs for the design. Do not sacrifice reliability for cost - that will always cost you more in the end. Build in the redundancy and HA at the very outset of the project - if you try to tack it on later in the process the business will push back and potentially not implement HA. References: http://www.bing.com/search?q=windows+azure+High+Availability  (each type of implementation is different, so I'm routing you to a search on the topic - look for the "Patterns and Practices" results for the area in Azure you're interested in)

  Read the article

• Speakers, Please Check Your Time

  - by AjarnMark

  Woodrow Wilson was once asked how long it would take him to prepare for a 10 minute speech. He replied "Two weeks". He was then asked how long it would take for a 1 hour speech. "One week", he replied. 2 hour speech? "I'm ready right now," he replied.  Whether that is a true story or an urban legend, I don’t really know, but either way, it is a poignant reminder for all speakers, and particularly apropos this week leading up to the PASS Community Summit. (Cross-posted to the PASS Professional Development Virtual Chapter blog #PASSProfDev.) What’s the point of that story?  Simply this…if you have plenty of time to do your presentation, you don’t need to prepare much because it is easy to throw in more and more material to stretch out to your allotted time.  But if you are on a tight time constraint, then it will take significant preparation to distill your talk down to only the essential points. I have attended seven of the last eight North American Summit events, and every one of them has been fantastic.  The speakers are great, the material is timely and relevant, and the networking opportunities are awesome.  And every year, there is one little thing that just bugs me…speakers going over their allotted time.  Why does it bother me so?  Well, if you look at a typical schedule for a Summit, you’ll see that there are six or more sessions going on at the same time, and only 15 minutes to move from one to another.  If you’re trying to maximize your training dollar by attending something during every session time slot, and you don’t want to be the last guy trying to squeeze into the middle of the row, then those 15 minutes can be critical.  All the more so if you need to stop and use the bathroom or if you have to hike to the opposite end of the convention center.  It is really a bad position to find yourself having to choose between learning the last key points of Speaker A who is going over time, and getting over to Speaker B on time so you don’t miss her key opening remarks. And frankly, I think it is just rude.  Yes, the speakers are the function, after all they are bringing the content that the rest of us are paying to learn.  But it is also an honor to be given the opportunity to speak at a conference like this, and no one speaker is so important that the conference would be a disaster without him.  Speakers know when they submit their abstract, long before the conference, how much time they will have.  It has been the same pattern at the Summit for at least the last eight years.  Program Sessions are 75 minutes long.  Some speakers who have a good track record, and meet other qualifying criteria, are extended an invitation to present a Spotlight Session which is 90 minutes (a 20% increase).  So there really is no excuse.  It’s not like you were promised a 2-hour segment and then discovered when you got here that it was only 75 minutes.  In fact, it’s not like PASS advertised 90-minute sessions for everyone and then a select few were cut back to only 75.  As a speaker, you know well before you get here which type of session you are doing and how long it is, so as a professional, you should plan accordingly. Now you might think that this only happens to rookies, but I’ll tell you that some of the worst offenders are big-name veterans who draw huge attendance numbers for their sessions.  Some attendees blow this off as, “Hey, it’s so-and-so, and I’d stay here for hours and listen to him/her talk.”  To which I would reply, “Then they should have submitted for a pre- or post-conference day-long seminar instead, but don’t try to squeeze your day-long talk into a 90-minute session.”  Now I don’t really believe that these speakers are being malicious or just selfishly trying to extend their time in the spotlight.  I think that most of them are merely being undisciplined and did not trim their presentation sufficiently, or allowed themselves to get off-track (often in a generous attempt to help someone in the audience with a question or problem that really should have been noted for further discussion after the session). So here is my recommendation…my plea, even.  TRIM THE FAT!  Now.  Before it’s too late.  Before you even get on the airplane, take a long, hard look at your presentation and eliminate some of the points that you originally thought you had to make, but in reality are not truly crucial to your main topic.  Delete a few slides.  Test your demos and have them already scripted rather than typing them during your talk.  It is better to cut out too much and end up with plenty of time at the end for Questions & Answers.  And you can always keep some notes on the stuff that you cut out so that you could fill it back in at the end as bonus material if you really do end up with a whole bunch of time on your hands.  But I don’t think you will.  And if you do, that will look even better to the audience as it will look like you’re giving them something extra that not every audience gets.  And they will thank you for that.

  Read the article

• Application Composer Series: Where and When to use Groovy

  - by Richard Bingham

  This brief post is really intended as more of a reference than an article. The table below highlights two things, firstly where you can add you own custom logic via groovy code (end column), and secondly (middle column) when you might use each particular feature. Obviously this applies only where Application Composer exists, namely Fusion CRM and Oracle Sales Cloud, and is based on current (release 8) functionality. Feature Most Common Use Case Groovy Field Triggers React to run-time data changes. Only fired when the field is changed and upon submit. Y Object Triggers To extend the standard processing logic for an object, based on record creation, updates and deletes. There is a split between these firing events, with some related to UI/ADF actions and others originating in the database. UI Trigger Points: After Create - fires when a new object record is created. Commonly used to set default values for fields. Before Modify - Fires when the end-user tries to modify a field value. Could be used for generic warnings or extra security logic. Before Invalidate - Fires on the parent object when one of its child object records is created, updated, or deleted. For building in relationship logic. Before Remove - Fires when an attempt is made to delete an object record. Can be used to create conditions that prevent deletes. Database Trigger Points: Before Insert in Database - Fires before a new object is inserted into the database. Can be used to ensure a dependent record exists or check for duplicates. After Insert in Database - Fires after a new object is inserted into the database. Could be used to create a complementary record. Before Update in Database -Fires before an existing object is modified in the database. Could be used to check dependent record values. After Update in Database - Fires after an existing object is modified in the database. Could be used to update a complementary record. Before Delete in Database - Fires before an existing object is deleted from the database. Could be used to check dependent record values. After Delete in Database - Fires after an existing object is deleted from the database. Could be used to remove dependent records. After Commit in Database - Fires after the change pending for the current object (insert, update, delete) is made permanent in the current transaction. Could be used when committed data that has passed all validation is required. After Changes Posted to Database - Fires after all changes have been posted to the database, but before they are permanently committed. Could be used to make additional changes that will be saved as part of the current transaction. Y Field Validation Displays a user entered error message based groovy logic validating the field value. The message is shown only when the validation logic returns false, and the logic is triggered only when tabbing out of the field on the user interface. Y Object Validation Commonly used where validation is needed across multiple related fields on the object. Triggered on the submit UI action. Y Object Workflows All Object Workflows are fired upon either record creation or update, along with the option of adding a custom groovy firing condition. Y Field Updates - change another field when a specified one changes. Intended as an easy way to set different run-time values (e.g. pick values for LOV's) plus the value field permits groovy logic entry. Y E-Mail Notification - sends an email notification to specified users/roles. Templates support using run-time value tokens and rich text. N Task Creation - for adding standard tasks for use in the worklist functionality. N Outbound Message - will create and send an XML payload of the related object SDO to a specified endpoint. N Business Process Flow - intended for approval using the seeded process, however can also trigger custom BPMN flows. N Global Functions Utility functions that can be called from any groovy code in Application Composer (across applications). Y Object Functions Utility functions that are local to the parent object. Usually triggered from within 'Buttons and Actions' definitions in Application Composer, although can be called from other code for that object (e.g. from a trigger). Y Add Custom Fields When adding custom fields there are a few places you can include groovy logic. Y Default Value - to add logic within setting the default value when new records are entered. Y Conditionally Updateable - to add logic to set the field to read-only or not. Y Conditionally Required - to add logic to set the field to required or not. Y Formula Field - Used to provide a new aggregate field that is entirely based on groovy logic and other field values. Y Simplified UI Layouts - Advanced Expressions Used for creating dynamic layouts for simplified UI pages where fields and regions show/hide based on run-time context values and logic. Also includes support for the depends-on feature as a trigger. Y Related References This Blog: Application Composer Series Extending Sales Guide: Using Groovy Scripts Groovy Scripting Reference Guide

  Read the article

• How to break out of if statement

  - by TheBroodian

  I'm not sure if the title is exactly an accurate representation of what I'm actually trying to ask, but that was the best I could think of. I am experiencing an issue with my character class. I have developed a system so that he can perform chain attacks, and something that was important to me was that 1)button presses during the process of an attack wouldn't interrupt the character, and 2) at the same time, button presses should be stored so that the player can smoothly queue up chain attacks in the middle of one so that gameplay doesn't feel rigid or unresponsive. This all begins when the player presses the punch button. Upon pressing the punch button, the game checks the state of the dpad at the moment of the button press, and then translates the resulting combined buttons into an int which I use as an enumerator relating to a punch method for the character. The enumerator is placed into a List so that the next time the character's Update() method is called, it will execute the next punch in the list. It only executes the next punch if my character is flagged with acceptInput as true. All attacks flag acceptInput as false, to prevent the interruption of attacks, and then at the end of an attack, acceptInput is set back to true. While accepting input, all other actions are polled for, i.e. jumping, running, etc. In runtime, if I attack, and then queue up another attack behind it (by pressing forward+punch) I can see the second attack visibly execute, which should flag acceptInput as false, yet it gets interrupted and my character will stop punching and start running if I am still holding down the dpad. Included is some code for context. This is the input region for my character. //Placed this outside the if (acceptInput) tree because I want it //to be taken into account whether we are accepting input or not. //This will queue up attacks, which will only be executed if we are accepting input. //This creates a desired effect that helps control the character in a // smoother fashion for the player. if (Input.justPressed(buttonManager.Punch)) { int dpadPressed = Input.DpadState(0); if (attackBuffer.Count() < 1) { attackBuffer.Add(CheckPunch(dpadPressed)); } else { attackBuffer.Clear(); attackBuffer.Add(CheckPunch(dpadPressed)); } } if (acceptInput) { if (attackBuffer.Count() > 0) { ExecutePunch(attackBuffer[0]); attackBuffer.RemoveAt(0); } //If D-Pad left is being held down. if (Input.DpadDirectionHeld(0, buttonManager.Left)) { flipped = false; if (onGround) { newAnimation = "run"; } velocity = new Vector2(velocity.X - acceleration, velocity.Y); if (walking == true && velocity.X <= -walkSpeed) { velocity.X = -walkSpeed; } else if (walking == false && velocity.X <= -maxSpeed) { velocity.X = -maxSpeed; } } //If D-Pad right is being held down. if (Input.DpadDirectionHeld(0, buttonManager.Right)) { flipped = true; if (onGround) { newAnimation = "run"; } velocity = new Vector2(velocity.X + acceleration, velocity.Y); if (walking == true && velocity.X >= walkSpeed) { velocity.X = walkSpeed; } else if (walking == false && velocity.X >= maxSpeed) { velocity.X = maxSpeed; } } //If jump/accept button is pressed. if (Input.justPressed(buttonManager.JumpAccept)) { if (onGround) { Jump(); } } //If toggle element next button is pressed. if (Input.justPressed(buttonManager.ToggleElementNext)) { if (elements.Count != 0) { elementInUse++; if (elementInUse >= elements.Count) { elementInUse = 0; } } } //If toggle element last button is pressed. if (Input.justPressed(buttonManager.ToggleElementLast)) { if (elements.Count != 0) { elementInUse--; if (elementInUse < 0) { elementInUse = Convert.ToSByte(elements.Count() - 1); } } } //If character is in the process of jumping. if (jumping == true) { if (Input.heldDown(buttonManager.JumpAccept)) { velocity.Y -= fallSpeed.Y; maxJumpTime -= elapsed; } if (Input.justReleased(buttonManager.JumpAccept) || maxJumpTime <= 0) { jumping = false; maxJumpTime = 0; } } //Won't execute abilities if input isn't being accepted. foreach (PlayerAbility ability in playerAbilities) { if (buffer.Matches(ability)) { if (onGround) { ability.Activate(); } if (!onGround && ability.UsableInAir) { ability.Activate(); } else if (!onGround && !ability.UsableInAir) { buffer.Clear(); } } } } When the attackBuffer calls ExecutePunch(int) method, ExecutePunch() will call one of the following methods: private void NeutralPunch1() //0 { acceptInput = false; busy = true; newAnimation = "punch1"; numberOfAttacks++; timeSinceLastAttack = 0; } private void ForwardPunch2(bool toLeft) //true == 7, false == 4 { forwardPunch2Timer = 0f; acceptInput = false; busy = true; newAnimation = "punch2begin"; numberOfAttacks++; timeSinceLastAttack = 0; if (toLeft) { velocity.X -= 800; } if (!toLeft) { velocity.X += 800; } } I assume the attack is being interrupted due to the fact that ExecutePunch() is in the same if statement as running, but I haven't been able to find a suitable way to stop this happening. Thank you ahead of time for reading this, I apologize for it having become so long winded.

  Read the article

• How do I dig myself out of this DEEP hole? [closed]

  - by user74847

  I may be a bit bias in the way i word this but any opinions and suggestions are welcome. I should start by saying i have a MSc in CS and a degree in new media +6 years expereince and im probably around a middleweight developer. I started a web development company with my friend from uni a year ago, there was a 4 month gap in the middle where i went miles away work on a big project. Ive since returned and picked up where we left off. A year on though i find im still staying up til 5am and getting up at 9 sometimes 2-3 days without sleep. While i was away i was working 9-5 and struggling to keep up with doing stuff for my clients 8 hours ahead, after work, so things stagnated. We currently have about 12 active projects, with one other part time developer and a full time freelancer who is dealing with one of our major projects. I am solely responsible for concurrently developing 2 big sites similar to gumtree in functionality, at the same time as about 5-6+ small WordPress based 5-10page sites. a lot of the content isnt in yet or the client is delaying so i chop and change project every other day which does my head in. Is it reasonable to expect myself to remember the intricate details of each project when i come back to it a week later? and remember the details of a task which hasnt been written down? my business partner seems to think so. or am i just forgetful? Im particularly bad at estimating timescales which doesnt help, added to that a lot of the technologies im am using are new to me (a magento site took weeks to theme rather than days and was full of bugs, even after 1000's of google searches and hours reading forums) im still trying to learn and find the best CMS for us to use and getting my head around the likes of Bootstrap and jquery, Cpanel / Linux (we just got a blank vps for me to set up with no experience) even installing an SSL certificate caused everyone's mail clients to go down which was more stress for me to sort out. I find the pressure of the workload and timescales and trying to learn this stuff so fast is beginning to turn me against my career path. The fact that i never seem to get anything done really winds up my business partner and iv come to associate him with the stress and pain of the whole situation especially when I get berated or a look that says "oh you retard" when I forget something. Even today i spent hours learning how a particular themeforest theme worked with wordpress and how i could twist it to work for our partiuclar needs, on the surface had done no work, that triggered a 30 minute tirade of anger and stress and questioning what i had done from my business partner. had i taken too long to work on that? shoudl i have done it in 2 hours instead of 6? i told him i would take 2 hours. i was wrong. I feel like im running myself into the ground. My sleeping pattern has got so bad that when im working im half asleep and making mistakes, my eyes are constantly purple underneath, i literally fall asleep at my desk, its affecting my social life too, ive not slept more than lightly for the last year and grind through impossible code puzzles in my half sleep wich keeps me awake, when im already exhausted. plus the work is rushed and buggy when it does get done so drags on into the next project. I also procrastinate quite badly, pacing the livingroom, looking out the window when Im alone for three days straight in the flat and start to get cabin fever which means i do even less work and the negative feedback loop continues. I get told im the only one with the problem when i say that i cant work from home any more, and examples of other freelancers get brought up. an office wouldnt bring any extra cash in to the company but im convinced having that moving more than 2 meters away from my bed to go to "work" would get me working, at the moment i feel guilty like i should be working 24-7. It is important that we do all this work to raise enough cash to get our business to the next level but every month still feels like a struggle to pay the rent (there is about £20K coming in by Jan) and i have to borrow money from friends often to buy food or get a taxi to a meeting, so it is vital the money keeps coming in. (im also 20 mins late for nearly all meetings but thats a different issue) have you experienced anything similar? how can i deal with the issues ive raised? is it realistic to develop 10 sites at once? how can i improve my relationship with my business partner? do you struggle to work at home? how do you deal with that? i think if i dont get my life on track by feb i will seriously consider giving it all up, but that seems like such a waste. any ideas!!? i need help! Thanks.

  Read the article

• Data Source Security Part 2

  - by Steve Felts

  In Part 1, I introduced the default security behavior and listed the various options available to change that behavior.  One of the key topics to understand is the difference between directly using database user and password values versus mapping from WLS user and password to the associated database values.   The direct use of database credentials is relatively new to WLS, based on customer feedback.  Some of the trade-offs are covered in this article. Credential Mapping vs. Database Credentials Each WLS data source has a credential map that is a mechanism used to map a key, in this case a WLS user, to security credentials (user and password).  By default, when a user and password are specified when getting a connection, they are treated as credentials for a WLS user, validated, and are converted to a database user and password using a credential map associated with the data source.  If a matching entry is not found in the credential map for the data source, then the user and password associated with the data source definition are used.  Because of this defaulting mechanism, you should be careful what permissions are granted to the default user.  Alternatively, you can define an invalid default user to ensure that no one can accidentally get through (in this case, you would need to set the initial capacity for the pool to zero so that the pool is populated only by valid users). To create an entry in the credential map: 1) First create a WLS user.  In the administration console, go to Security realms, select your realm (e.g., myrealm), select Users, and select New.  2) Second, create the mapping.  In the administration console, go to Services, select Data sources, select your data source name, select Security, select Credentials, and select New.  See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/ConfigureCredentialMappingForADataSource.html for more information. The advantages of using the credential mapping are that: 1) You don’t hard-code the database user/password into a program or need to prompt for it in addition to the WLS user/password and 2) It provides a layer of abstraction between WLS security and database settings such that many WLS identities can be mapped to a smaller set of DB identities, thereby only requiring middle-tier configuration updates when WLS users are added/removed. You can cut down the number of users that have access to a data source to reduce the user maintenance overhead.  For example, suppose that a servlet has the one pre-defined, special WLS user/password for data source access, hard-wired in its code in a getConnection(user, password) call.  Every WebLogic user can reap the specific DBMS access coded into the servlet, but none has to have general access to the data source.  For instance, there may be a ‘Sales’ DBMS which needs to be protected from unauthorized eyes, but it contains some day-to-day data that everyone needs. The Sales data source is configured with restricted access and a servlet is built that hard-wires the specific data source access credentials in its connection request.  It uses that connection to deliver only the generally needed day-to-day information to any caller. The servlet cannot reveal any other data, and no WebLogic user can get any other access to the data source.  This is the approach that many large applications take and is the reasoning behind the default mapping behavior in WLS. The disadvantages of using the credential map are that: 1) It is difficult to manage (create, update, delete) with a large number of users; it is possible to use WLST scripts or a custom JMX client utility to manage credential map entries. 2) You can’t share a credential map between data sources so they must be duplicated. Some applications prefer not to use the credential map.  Instead, the credentials passed to getConnection(user, password) should be treated as database credentials and used to authenticate with the database for the connection, avoiding going through the credential map.  This is enabled by setting the “use-database-credentials” to true.  See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/ConfigureOracleParameters.html "Configure Oracle parameters" in Oracle WebLogic Server Administration Console Help. Use Database Credentials is not currently supported for Multi Data Source configurations.  When enabled, it turns off credential mapping on Generic and Active GridLink data sources for the following attributes: 1. identity-based-connection-pooling-enabled (this interaction is available by patch in 10.3.6.0). 2. oracle-proxy-session (this interaction is first available in 10.3.6.0). 3. set client identifier (this interaction is available by patch in 10.3.6.0).  Note that in the data source schema, the set client identifier feature is poorly named “credential-mapping-enabled”.  The documentation and the console refer to it as Set Client Identifier. To review the behavior of credential mapping and using database credentials: - If using the credential map, there needs to be a mapping for each WLS user to database user for those users that will have access to the database; otherwise the default user for the data source will be used.  If you always specify a user/password when getting a connection, you only need credential map entries for those specific users. - If using database credentials without specifying a user/password, the default user and password in the data source descriptor are always used.  If you specify a user/password when getting a connection, that user will be used for the credentials.  WLS users are not involved at all in the data source connection process.

  Read the article

• dynatree: how can i select child node programmatically

  - by Muhammad Adeel Zahid

  hello everyone i m using jquery's dynaTree in my application and i want to select the all the child nodes programmably when a node is selected. the structure of my tree is as follows <div id = "tree"> <ul> <li>package 1 <ul> <li>module 1.1 <ul> <li> document 1.1.1</li> <li> document 1.1.2</li> </ul> </li> <li>module 1.2 <ul> <li>document 1.2.1</li> <li>document 1.2.2</li> </ul> </li> </ul> </li> <li> package 2 <ul> <li> module 2.1 <ul> <li>document 2.1.1</li> <li>document 2.1.1</li> </ul> </li> </ul> </li> </ul> </div> now what i want is that when i click on tree node with title "package 1" all its child nodes i.e (module 1.1, document 1.1.1, document 1.1.2, module 1.2, document 1.2.1, document 1.2.2) should also be selected below is the approach i tried to use $("#tree").dynatree({ onSelect: function(flag, dtnode) { // This will happen each time a check box is selected/deselected var selectedNodes = dtnode.tree.getSelectedNodes(); var selectedKeys = $.map(selectedNodes, function(node) { //alert(node.data.key); return node.data.key; }); // Set the hidden input field's value to the selected items $('#SelectedItems').val(selectedKeys.join(",")); if (flag) { child = dtnode.childList; alert(child.length); for (i = 0; i < child.length; i++) { var x = child[i].select(true); alert(i); } } }, checkbox: true, onActivate: function(dtnode) { //alert("You activated " + dtnode.data.key); } }); in the if(flag) condition i get all the child nodes of element that is selected by user and it gives me the correct value that i can see from alert(child.length) statement. then i run the loop to select all the children but loop never goes beyond the statement var x = child[i].select(true); and i can never see the statement alert(i) being executed. the result of above statement is that if i select package 1, module 1.1 and document 1.1.1 is also selected but never does it execute alert(i) statement neither other children of package 1 are selected. in my view when first time child[i].select(true) statement is executed it also triggers the on select event of its children thus making a recursion kind of thing is my thinking correct? no matter recursion or what why on earth does it not complete the loop and execute very next instruction alert(i). please help me in solving this problem. i m dying to see that alert any suggestion and help is highly appriciated thanks Adeel

  Read the article

• Android-Java: Constructing a triangle based on Coordinates on a map and your bearing

  - by Aidan

  Hi Guys, I'm constructing a geolocation based application and I'm trying to figure out a way to make my application realise when a user is facing the direction of the given location (a particular long / lat co-ord). I've got the math figured, I just have the triangle to construct. //UPDATE So I've figured out a good bit of this... Below is a method which takes in a long / lat value and attempts to compute a triangle finding a point 700 meters away and one to its left + right. It'd then use these to construct the triangle. It computes the correct longitude but the latitude ends up somewhere off the coast of east Africa. (I'm in Ireland!). public void drawtri(double currlng,double currlat, double bearing){ bearing = (bearing < 0 ? -bearing : bearing); System.out.println("RUNNING THE DRAW TRIANGLE METHOD!!!!!"); System.out.println("CURRENT LNG" + currlng); System.out.println("CURRENT LAT" + currlat); System.out.println("CURRENT BEARING" + bearing); //Find point X(x,y) double distance = 0.7; //700 meters. double R = 6371.0; //The radius of the earth. //Finding X's y value. Math.toRadians(currlng); Math.toRadians(currlat); Math.toRadians(bearing); distance = distance/R; Global.Alat = Math.asin(Math.sin(currlat)*Math.cos(distance)+ Math.cos(currlat)*Math.sin(distance)*Math.cos(bearing)); System.out.println("CURRENT ALAT!!: " + Global.Alat); //Finding X's x value. Global.Alng = currlng + Math.atan2(Math.sin(bearing)*Math.sin(distance) *Math.cos(currlat), Math.cos(distance)-Math.sin(currlat)*Math.sin(Global.Alat)); Math.toDegrees(Global.Alat); Math.toDegrees(Global.Alng); //Co-ord of Point B(x,y) // Note: Lng = X axis, Lat = Y axis. Global.Blat = Global.Alat+ 00.007931; Global.Blng = Global.Alng; //Co-ord of Point C(x,y) Global.Clat = Global.Alat - 00.007931; Global.Clng = Global.Alng; } From debugging I've determined the problem lies with the computation of the latitude done here.. Global.Alat = Math.asin(Math.sin(currlat)*Math.cos(distance)+ Math.cos(currlat)*Math.sin(distance)*Math.cos(bearing)); I have no idea why though and don't know how to fix it. I got the formula from this site.. http://www.movable-type.co.uk/scripts/latlong.html It appears correct and I've tested multiple things... I've tried converting to Radians then post computations back to degrees, etc. etc. Anyone got any ideas how to fix this method so that it will map the triangle ONLY 700 meters in from my current location in the direction that I am facing? Thanks, EDIT/// Converting the outcome to radians gives me a lat of 5.6xxxxxxxxxxxxxx .I have a feeling this bug has something to do with conversions but its not THAT simple. The equation is correct, it just.. outputs wrong..

  Read the article

• Using DateTime in a SqlParameter for Stored Procedure, format error

  - by Matt

  I'm trying to call a stored procedure (on a SQL 2005 server) from C#, .NET 2.0 using DateTime as a value to a SqlParameter. The SQL type in the stored procedure is 'datetime'. Executing the sproc from SQL Management Studio works fine. But everytime I call it from C# I get an error about the date format. When I run SQL Profiler to watch the calls, I then copy paste the exec call to see whats going on. These are my observations and notes about what I've attempted: 1) If I pass the DateTime in directly as a DateTime or converted to SqlDateTime, the field is surrounding by a PAIR of single quotes, such as @Date_Of_Birth=N''1/8/2009 8:06:17 PM'' 2) If I pass the DateTime in as a string, I only get the single quotes 3) Using SqlDateTime.ToSqlString() does not result in a UTC formatted datetime string (even after converting to universal time) 4) Using DateTime.ToString() does not result in a UTC formatted datetime string. 5) Manually setting the DbType for the SqlParameter to DateTime does not change the above observations. So, my questions then, is how on earth do I get C# to pass the properly formatted time in the SqlParameter? Surely this is a common use case, why is it so difficult to get working? I can't seem to convert DateTime to a string that is SQL compatable (e.g. '2009-01-08T08:22:45') EDIT RE: BFree, the code to actually execute the sproc is as follows: using (SqlCommand sprocCommand = new SqlCommand(sprocName)) { sprocCommand.Connection = transaction.Connection; sprocCommand.Transaction = transaction; sprocCommand.CommandType = System.Data.CommandType.StoredProcedure; sprocCommand.Parameters.AddRange(parameters.ToArray()); sprocCommand.ExecuteNonQuery(); } To go into more detail about what I have tried: parameters.Add(new SqlParameter("@Date_Of_Birth", DOB)); parameters.Add(new SqlParameter("@Date_Of_Birth", DOB.ToUniversalTime())); parameters.Add(new SqlParameter("@Date_Of_Birth", DOB.ToUniversalTime().ToString())); SqlParameter param = new SqlParameter("@Date_Of_Birth", System.Data.SqlDbType.DateTime); param.Value = DOB.ToUniversalTime(); parameters.Add(param); SqlParameter param = new SqlParameter("@Date_Of_Birth", SqlDbType.DateTime); param.Value = new SqlDateTime(DOB.ToUniversalTime()); parameters.Add(param); parameters.Add(new SqlParameter("@Date_Of_Birth", new SqlDateTime(DOB.ToUniversalTime()).ToSqlString())); Additional EDIT The one I thought most likely to work: SqlParameter param = new SqlParameter("@Date_Of_Birth", System.Data.SqlDbType.DateTime); param.Value = DOB; Results in this value in the exec call as seen in the SQL Profiler @Date_Of_Birth=''2009-01-08 15:08:21:813'' If I modify this to be @Date_Of_Birth='2009-01-08T15:08:21' It works, but it won't parse with pair of single quotes, and it wont convert to a datetime correctly with the space between the date and time and with the milliseconds on the end. Update and Success First and foremost, thank you everyone for the answers. I post this for the sake of completeness and accuracy on SO - because I certainly do not do it for my pride... I had copy/pasted the code above after the request from below. I trimmed things here and there to be concise. Turns out my problem was in the code I left out, which I'm sure any one of you would have spotted in an instant. I had wrapped my sproc calls inside a transaction. Turns out that I was simply not doing transaction.Commit()!!!!! I'm ashamed to say it, but there you have it. I still don't know what's going on with the syntax I get back from the profiler. A coworker watched with his own instance of the profiler from his computer, and it returned proper syntax. Watching the very SAME executions from my profiler showed the incorrect syntax. It acted as a red-herring, making me believe there was a query syntax problem instead of the much more simple and true answer, which was that I need to commit the transaction! I marked an answer below as correct, and threw in some up-votes on others because they did, after all, answer the question, even if they didn't fix my specific (brain lapse) issue. Thanks again for the help.

  Read the article

• Why does my performance increase when touching the screen?

  - by Smills

  For some reason my FPS jumps up considerably when I move my mouse around on the screen (on the emulator) while holding the left mouse button. Normally my game is very laggy, but if I touch the screen (and as long as I am moving the mouse around while touching) it goes perfectly smooth. I have tried sleeping for 20ms in the onTouchEvent, but it doesn't appear to make any difference. Here is the code I use in my onTouchEvent: // events when touching the screen public boolean onTouchEvent(MotionEvent event) { int eventaction = event.getAction(); touchX=event.getX(); touchY=event.getY(); switch (eventaction) { case MotionEvent.ACTION_DOWN: { touch=true; } break; case MotionEvent.ACTION_MOVE: { } break; case MotionEvent.ACTION_UP: { touch=false; } break; } /*try { AscentThread.sleep(20); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); }*/ return true; } In the logcat log, FPS is the current fps (average of the last 20 frames), touch is whether or not the screen is being touched (from onTouchEvent). What on earth is going on? Has anyone else had this odd behaviour before? Logcat log: 12-21 19:43:26.154: INFO/myActivity(786): FPS: 31.686569159606414 Touch: false 12-21 19:43:27.624: INFO/myActivity(786): FPS: 19.46310293212206 Touch: false 12-21 19:43:29.104: INFO/myActivity(786): FPS: 18.801202175690467 Touch: false 12-21 19:43:30.514: INFO/myActivity(786): FPS: 21.118295877408478 Touch: false 12-21 19:43:31.985: INFO/myActivity(786): FPS: 19.117397812958878 Touch: false 12-21 19:43:33.534: INFO/myActivity(786): FPS: 15.572571858239263 Touch: false 12-21 19:43:34.934: INFO/myActivity(786): FPS: 20.584119901503506 Touch: false 12-21 19:43:36.404: INFO/myActivity(786): FPS: 18.888025905454207 Touch: false 12-21 19:43:37.814: INFO/myActivity(786): FPS: 22.35722329083629 Touch: false 12-21 19:43:39.353: INFO/myActivity(786): FPS: 15.73604859775362 Touch: false 12-21 19:43:40.763: INFO/myActivity(786): FPS: 20.912449882754633 Touch: false 12-21 19:43:42.233: INFO/myActivity(786): FPS: 18.785278388997718 Touch: false 12-21 19:43:43.634: INFO/myActivity(786): FPS: 20.1357397209596 Touch: false 12-21 19:43:45.043: INFO/myActivity(786): FPS: 21.961138432007957 Touch: false 12-21 19:43:46.453: INFO/myActivity(786): FPS: 22.167196852834273 Touch: false 12-21 19:43:47.854: INFO/myActivity(786): FPS: 22.207318228024274 Touch: false 12-21 19:43:49.264: INFO/myActivity(786): FPS: 22.36980559230175 Touch: false 12-21 19:43:50.604: INFO/myActivity(786): FPS: 23.587638823252547 Touch: false 12-21 19:43:52.073: INFO/myActivity(786): FPS: 19.233902040593076 Touch: false 12-21 19:43:53.624: INFO/myActivity(786): FPS: 15.542190150440987 Touch: false 12-21 19:43:55.034: INFO/myActivity(786): FPS: 20.82290063974675 Touch: false 12-21 19:43:56.436: INFO/myActivity(786): FPS: 21.975282007207717 Touch: false 12-21 19:43:57.914: INFO/myActivity(786): FPS: 18.786927284103687 Touch: false 12-21 19:43:59.393: INFO/myActivity(786): FPS: 18.96879004217992 Touch: false 12-21 19:44:00.625: INFO/myActivity(786): FPS: 28.367566618064878 Touch: false 12-21 19:44:02.113: INFO/myActivity(786): FPS: 19.04441528684418 Touch: false 12-21 19:44:03.585: INFO/myActivity(786): FPS: 18.807837511809065 Touch: false 12-21 19:44:04.993: INFO/myActivity(786): FPS: 21.134330284993418 Touch: false 12-21 19:44:06.275: INFO/myActivity(786): FPS: 27.209688764079907 Touch: false 12-21 19:44:07.753: INFO/myActivity(786): FPS: 19.055894653261653 Touch: false 12-21 19:44:09.163: INFO/myActivity(786): FPS: 22.05422794901088 Touch: false 12-21 19:44:10.644: INFO/myActivity(786): FPS: 18.6956805300596 Touch: false 12-21 19:44:12.124: INFO/myActivity(786): FPS: 17.434180581311054 Touch: false 12-21 19:44:13.594: INFO/myActivity(786): FPS: 18.71932038510891 Touch: false 12-21 19:44:14.504: INFO/myActivity(786): FPS: 40.94571503868066 Touch: true 12-21 19:44:14.924: INFO/myActivity(786): FPS: 57.061200121138576 Touch: true 12-21 19:44:15.364: INFO/myActivity(786): FPS: 62.54377946377936 Touch: true 12-21 19:44:15.764: INFO/myActivity(786): FPS: 64.05005071818726 Touch: true 12-21 19:44:16.384: INFO/myActivity(786): FPS: 50.912951172948155 Touch: true 12-21 19:44:16.874: INFO/myActivity(786): FPS: 55.31242053078078 Touch: true 12-21 19:44:17.364: INFO/myActivity(786): FPS: 59.31625410615102 Touch: true 12-21 19:44:18.413: INFO/myActivity(786): FPS: 36.63504170925923 Touch: false 12-21 19:44:19.885: INFO/myActivity(786): FPS: 18.099130467755923 Touch: false 12-21 19:44:21.363: INFO/myActivity(786): FPS: 18.458978222946566 Touch: false 12-21 19:44:22.683: INFO/myActivity(786): FPS: 25.582179409330823 Touch: true 12-21 19:44:23.044: INFO/myActivity(786): FPS: 60.99865521942455 Touch: true 12-21 19:44:23.403: INFO/myActivity(786): FPS: 74.17873975470984 Touch: true 12-21 19:44:23.763: INFO/myActivity(786): FPS: 64.25663040460714 Touch: true 12-21 19:44:24.113: INFO/myActivity(786): FPS: 62.47483457826921 Touch: true 12-21 19:44:24.473: INFO/myActivity(786): FPS: 65.27969529547072 Touch: true 12-21 19:44:24.825: INFO/myActivity(786): FPS: 67.84743115273311 Touch: true 12-21 19:44:25.173: INFO/myActivity(786): FPS: 73.50854551357706 Touch: true 12-21 19:44:25.523: INFO/myActivity(786): FPS: 70.46432534585368 Touch: true 12-21 19:44:25.873: INFO/myActivity(786): FPS: 69.04076953445896 Touch: true

  Read the article

• Why does my Opengl es android testbed app not render anything besides a red screen?

  - by nathan

  For some reason my code here (this is the entire thing) doesnt actually render anything besides a red screen.. can anyone tell me why? package com.ntu.way2fungames.earth.testbed; import java.nio.FloatBuffer; import javax.microedition.khronos.egl.EGLConfig; import javax.microedition.khronos.opengles.GL10; import android.app.Activity; import android.content.Context; import android.opengl.GLSurfaceView; import android.opengl.GLSurfaceView.Renderer; import android.os.Bundle; public class projectiles extends Activity { GLSurfaceView lGLView; Renderer lGLRenderer; float projectilesX[]= new float[5001]; float projectilesY[]= new float[5001]; float projectilesXa[]= new float[5001]; float projectilesYa[]= new float[5001]; float projectilesTheta[]= new float[5001]; float projectilesSpeed[]= new float[5001]; private static FloatBuffer drawBuffer; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); SetupProjectiles(); Context mContext = this.getWindow().getContext(); lGLView= new MyView(mContext); lGLRenderer= new MyRenderer(); lGLView.setRenderer(lGLRenderer); setContentView(lGLView); } private void SetupProjectiles() { int i=0; for (i=5000;i>0;i=i-1){ projectilesX[i] = 240; projectilesY[i] = 427; float theta = (float) ((i/5000)*Math.PI*2); projectilesXa[i] = (float) Math.cos(theta); projectilesYa[i] = (float) Math.sin(theta); projectilesTheta[i]= theta; projectilesSpeed[i]= (float) (Math.random()+1); } } public class MyView extends GLSurfaceView{ public MyView(Context context) { super(context); // TODO Auto-generated constructor stub } } public class MyRenderer implements Renderer{ private float[] projectilecords = new float[] { .0f, .5f, 0, -.5f, 0f, 0, .5f, 0f, 0, 0, -5f, 0, }; @Override public void onDrawFrame(GL10 gl) { gl.glClear(GL10.GL_COLOR_BUFFER_BIT); gl.glMatrixMode(GL10.GL_MODELVIEW); //gl.glLoadIdentity(); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); for (int i=5000;i>4500;i=i-1){ //drawing section gl.glLoadIdentity(); gl.glColor4f(.9f, .9f,.9f,.9f); gl.glTranslatef(projectilesY[i], projectilesX[i],1); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, drawBuffer); gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, 12); //physics section projectilesX[i]=projectilesX[i]+projectilesXa[i]; projectilesY[i]=projectilesY[i]+projectilesYa[i]; } gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); } @Override public void onSurfaceChanged(GL10 gl, int width, int height) { if (height == 0) height = 1; // draw on the entire screen gl.glViewport(0, 0, width, height); // setup projection matrix gl.glMatrixMode(GL10.GL_PROJECTION); gl.glLoadIdentity(); gl.glOrthof(0,width,height,0, -100, 100); } @Override public void onSurfaceCreated(GL10 gl, EGLConfig arg1) { gl.glShadeModel(GL10.GL_SMOOTH); gl.glClearColor(1f, .01f, .01f, 1f); gl.glClearDepthf(1.0f); gl.glEnable(GL10.GL_DEPTH_TEST); gl.glDepthFunc(GL10.GL_LEQUAL); gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); drawBuffer = FloatBuffer.wrap(projectilecords); } } }

  Read the article

• win32: TextOut not being displayed

  - by KaiserJohaan

  Hello again, I recently having my mainwindow write text by using WM_PAINT, but now I realise it was maybe not the best message to do so in, so I'm trying another version; The mainwindow contains a menu, upon clicing a menu item the ID_FILE_PID msg is sent and it builds the 4 new windows aswell as displays text in the mainwindow (paintEditSigns function). The 4 windows works fine but the text dosn't work at all, unless I do it in the main() function as shown... what on earth is this? O_O BTW: I still have no clue why the code-display on StackOverflow keeps looking so wierd when I post, why is this? switch(message) { case WM_COMMAND: switch (LOWORD(wParam)) { case ID_FILE_PID: { HWND hWndButton; HWND hWndEdit; HWND hWndEdit2; HWND hWndDisplay; // drawing the text in mainwindow paintEditSigns(); -- does not do anything here! // adding new windows in the mainwindow hWndButton = CreateWindowEx(0,TEXT("BUTTON"),"Modify",WS_CHILD | WS_VISIBLE | BS_DEFPUSHBUTTON, 170,56,80,30,hWnd,(HMENU)ID_BUTTON,hThisInstance,NULL); hWndEdit = CreateWindowEx(0,RICHEDIT_CLASS,TEXT(""),WS_CHILD | WS_VISIBLE | WS_BORDER, 120,30,80,25,hWnd,(HMENU)ID_EDIT,hThisInstance,NULL); hWndEdit2 = CreateWindowEx(0,RICHEDIT_CLASS,TEXT(""),WS_CHILD | WS_VISIBLE | WS_BORDER, 220,30,80,25,hWnd,(HMENU)ID_EDIT2,hThisInstance,NULL); hWndDisplay = CreateWindowEx(0,TEXT("STATIC"),NULL,WS_CHILD | WS_VISIBLE | WS_BORDER, 0,100,450,140,hWnd,(HMENU)ID_DISPLAY,hThisInstance,NULL); break; } ..... // // Main function // int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow) { HWND hWnd; WNDCLASSEX wc; ZeroMemory(&wc, sizeof(WNDCLASSEX)); hThisInstance = hInstance; LoadLibrary("Riched20.dll"); wc.cbSize = sizeof(WNDCLASSEX); wc.style = CS_HREDRAW | CS_VREDRAW; wc.lpfnWndProc = WindowProc; wc.hInstance = hInstance; wc.lpszMenuName = MAKEINTRESOURCE(IDR_MYMENU); if(!(wc.hIcon = LoadIcon(hInstance,MAKEINTRESOURCE(IDI_MYICON)))) { HRESULT res = GetLastError(); } wc.hCursor = LoadCursor(NULL, IDC_ARROW); wc.hbrBackground = (HBRUSH)COLOR_WINDOW; wc.lpszClassName = TEXT("testcpp"); RegisterClassEx(&wc); hWnd = CreateWindowEx(NULL, wc.lpszClassName, TEXT("test"), WS_OVERLAPPEDWINDOW, 300, 200, 450, 300, NULL, NULL, hInstance, NULL); ShowWindow(hWnd,nCmdShow); //paintEditSigns() -- here it works, but not when in the message part MSG msg; while (GetMessage(&msg, NULL,0,0)) { TranslateMessage(&msg); DispatchMessage(&msg); } return msg.wParam; } void paintEditSigns() { HFONT hf = createFont(); PAINTSTRUCT ps; HWND hWnd = FindWindow(TEXT("testcpp"),TEXT("test")); HBRUSH hbruzh = CreateSolidBrush(RGB(0,0,0)); HDC hdz = BeginPaint(hWnd,&ps); string s = "Memory Address"; SelectBrush(hdz,hbruzh); SelectFont(hdz,hf); TextOut(hdz,0,100,s.c_str(),s.length()); EndPaint(hWnd,&ps); DeleteObject(hbruzh); UpdateWindow(hWnd); } HFONT createFont() { HDC hdc; long lfHeight; hdc = GetDC(NULL); lfHeight = -MulDiv(12, GetDeviceCaps(hdc, LOGPIXELSY), 72); ReleaseDC(NULL, hdc); HFONT hf = CreateFont(lfHeight, 0, 0, 0, 0, TRUE, 0, 0, 0, 0, 0, 0, 0, "MS Sans Serif"); return hf; }

  Read the article

• Socket php server not showing messages sent from android client

  - by Mj1992

  Hi I am a newbie in these kind of stuff but here's what i want to do. I am trying to implement a chat application in which users will send their queries from the website and as soon as the messages are sent by the website users.It will appear in the android mobile application of the site owner who will answer their queries .In short I wanna implement a live chat. Now right now I am just simply trying to send messages from android app to php server. But when I run my php script from dreamweaver in chrome the browser keeps on loading and doesn't shows any output when I send message from the client. Sometimes it happened that the php script showed some outputs which I have sent from the android(client).But i don't know when it works and when it does not. So I want to show those messages in the php script as soon as I send those messages from client and vice versa(did not implemented the vice versa for client but help will be appreciated). Here's what I've done till now. php script: <?php set_time_limit (0); $address = '127.0.0.1'; $port = 1234; $sock = socket_create(AF_INET, SOCK_STREAM, 0); socket_bind($sock, $address, $port) or die('Could not bind to address'); socket_listen($sock); $client = socket_accept($sock); $welcome = "Roll up, roll up, to the greatest show on earth!\n? "; socket_write($client, $welcome,strlen($welcome)) or die("Could not send connect string\n"); do{ $input=socket_read($client,1024,1) or die("Could not read input\n"); echo "User Says: \n\t\t\t".$input; if (trim($input) != "") { echo "Received input: $input\n"; if(trim($input)=="END") { socket_close($spawn); break; } } else{ $output = strrev($input) . "\n"; socket_write($spawn, $output . "? ", strlen (($output)+2)) or die("Could not write output\n"); echo "Sent output: " . trim($output) . "\n"; } } while(true); socket_close($sock); echo "Socket Terminated"; ?> Android Code: public class ServerClientActivity extends Activity { private Button bt; private TextView tv; private Socket socket; private String serverIpAddress = "127.0.0.1"; private static final int REDIRECTED_SERVERPORT = 1234; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); bt = (Button) findViewById(R.id.myButton); tv = (TextView) findViewById(R.id.myTextView); try { InetAddress serverAddr = InetAddress.getByName(serverIpAddress); socket = new Socket(serverAddr, REDIRECTED_SERVERPORT); } catch (UnknownHostException e1) { e1.printStackTrace(); } catch (IOException e1) { e1.printStackTrace(); } bt.setOnClickListener(new OnClickListener() { public void onClick(View v) { try { EditText et = (EditText) findViewById(R.id.EditText01); String str = et.getText().toString(); PrintWriter out = new PrintWriter(new BufferedWriter(new OutputStreamWriter(socket.getOutputStream())),true); out.println(str); Log.d("Client", "Client sent message"); } catch (UnknownHostException e) { tv.setText(e.getMessage()); e.printStackTrace(); } catch (IOException e) { tv.setText(e.getMessage()); e.printStackTrace(); } catch (Exception e) { tv.setText(e.getMessage()); e.printStackTrace(); } } }); } } I've just pasted the onclick button event code for Android.Edit text is the textbox where I am going to enter my text. The ip address and port are same as in php script.

  Read the article

• Existing web-site CSS replacement (re-skinning) best-practices without changing the HTML

  - by Enigmativity

  I can see a number of other good answers to questions relating to CSS best-practices on stack overflow: How to Manage CSS Explosion CSS Conventions / Code Layout Models Are there any CSS standards that I should follow while writing my first stylesheet? What is the best method for tidying CSS? Best Practices - CSS Stylesheet Formatting But I think I have a different problem. I'm trying to "re-skin" an existing site that has been nicely built using div's and ul's, etc, and it has a good existing CSS file, but when I start making changes to the CSS I quickly find that I break the layout. My feeling is that it is very hard to get a feel for how all the CSS will work together and indeed what CSS is affecting parent and sibling elements in the HTML. So, my question is "what are the best-practices around re-skinning an existing web-site by replacing the CSS only and not modifying the existing HTML?" I can't change the classes, ids, node hierarchy, etc. An example of the particular site that I am trying to re-skin is http://demo.nopcommerce.com/. The existing CSS can be as complicated/detailed as this extract from the main CSS file: .header-selectors-wrapper { text-align: right; float: right; width: 500px; } .header-currencyselector { float: right; } .header-languageselector { float: left; } .header-taxDisplayTypeSelector { float: right; } .header-links-wrapper { float: right; text-align: right; width: 570px; } .header-links { border: solid 1px #9a9a9a; padding: 5px 5px 5px 5px; margin-bottom: 5px; display: inline-table; } .order-summary-content .cart .cart-item-row td, .wishlist-content .cart .cart-item-row td { border-bottom: 1px solid #c5c5c5; vertical-align: middle; line-height: 30px; } .order-summary-content .cart .cart-item-row td.product, .wishlist-content .cart .cart-item-row td.product { text-align: left; padding: 0px 10px 0px 10px; } .order-summary-content .cart .cart-item-row td.product a, .wishlist-content .cart .cart-item-row td.product a { font-weight: bold; } Any help would be appreciated.

  Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >