Search Results

Search found 10706 results on 429 pages for 'pkg config'.

Page 115/429 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

• Ubuntu and racadm

  - by lmqcn

  I recently purchased a used poweredge 1850 server and it came with a DRAC card. After wiping the HDD and installing ubuntu server 12.04.3 LTS amd64 on it, I am now trying to gain access to the DRAC which I believe is version 4. I have properly configured the DRAC to use it's own IP on my LAN and when I point my browser to the IP address, I am greeted with the DRAC login page (it has the dell logo and everything). However, after trying the credentials of root/calvin, I was denied access. So I think that the previous owners had set their own password. After doing some reading, it appears that I can reset the credentials to the default using racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i 1 newpassword but upon entering the command, I get this error: bash: /usr/sbin/racadm: No such file or directory This holds true even if I run sudo su prior to running the racadm command. If, however, I run sudo racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i 1 newpassword there are no errors. Yet, when I try to log into the DRAC via the web interface using the credentials of root/newpassword I am still not granted access. I installed the dell utilities via the guide at https://wiki.ubuntu.com/HardwareSupportMachinesServersDellNotes. I first tried to install the 64 bit version that is on the dell repositories, but after that was unsuccessful, I just followed the guide verbatim. No errors were produced in either case. I even followed the information at the bottom of the guide by executing sudo pppd /dev/ttyS1 1382400 crtscts noipdefault noauth lock persist connect 'chat -v "" CLIENT CLIENTSERVER "\\c"' but obviously, replacing the /dev/ttyS1 with the correct information for my system. ls -l /usr/sbin/ | grep racadm yields -rwxr-xr-x 1 root root 87930 Sep 16 04:03 racadm I have tried these credentials after each attempt of changing the password: root/calvin root/newpassword admin/calvin admin/newpassword All have been unsuccessful. What is the next course of action that I should take?

  Read the article

• cannot get upstart to run user job

  - by dre

  I am trying to get upstart start a user job during the boot of my machine. I have my conky.conf upstart config file in my $HOME/.init directory. Wenn I run "start conky" I get this error: dre@dre-laptop:~$ start conky start: Rejected send message, 1 matched rules; type="method_call", sender=":1.76" (uid=1000 pid=2843 comm="start conky ") interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply="0" destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init") dre@dre-laptop:~$ I (think I) know that this error has to do with the d-bus system (authentification). I also read (http://upstart.ubuntu.com/cookbook/#id96) that ubuntu 12.10 already has the right configuration in the d-bus config file "/etc/dbus-1/system.d/Upstart.conf" to allow normal users to use upstart. dre@dre-laptop:~/.init$ cat conky.conf description "conky, a system monitor appled" start on lightdm stop on shutdown # Automatically restart process if crashed respawn # Essentially lets upstart know the process will detach itself to the background #expect fork # Start conky exec /usr/bin/conky So, who knows, what do I do wrong??? greetings Andre No one??? Please... give me your best shot.

  Read the article

• IIS - HTTP Redirect all requests for one virtual directory to another

  - by nekno

  How do I set up an HTTP Redirect rule to redirect all requests for a virtual directory to another virtual directory, when I don't know the hostname or complete URL, and cannot use the URL Rewrite module? The following redirects should work: http://host1/app/oldvdir -> http://host1/app/newvdir http://host1/app/oldvdir/ -> http://host1/app/newvdir/ http://host1/app/oldvdir/login.aspx -> http://host1/app/newvdir/login.aspx http://host2/app/oldvdir/login.aspx -> http://host2/app/newvdir/login.aspx I would like to place the redirect rule in the app's root web.config. I have attempted the following rules, but the end result is simply that the redirected vdir gets duplicated on the end of the original vdir until reaching the max URL length, e.g., http://host/oldvdir/login.aspx -> http://host/oldvdir/newvdir/newvdir/newvdir/... Rules in root web.config (I also have tried all sorts of combinations of settings with and without leading and trailing slashes, etc): <location path="oldvdir"> <system.webServer> <httpRedirect enabled="true" exactDestination="false" httpResponseStatus="Permanent"> <add wildcard="*/oldvdir/*" destination="/newvdir/"/> </httpRedirect> </system.webServer> </location> <location path="oldvdir/"> <system.webServer> <httpRedirect enabled="true" exactDestination="false" destination="/newvdir" httpResponseStatus="Permanent"/> </system.webServer> </location>

  Read the article

• How can I get multitouch enabled on my Sentelic touchpad (msi x350 notebook)?

  - by Jon

  I understand my MSI x350 notebook comes with a Sentelic trackpad, which supports multi-touch (according to the MSI website). Is there a way to enable multitouch on Ubuntu? I've been having difficulty finding info about this on google, and since it's not a synaptics touchpad I haven't been able to find much info in ubuntu docs. My mouse preferences doesn't have a trackpad tab like it does on, say, a Macbook. Running "xinput list" returns: FSPPS/2 Sentelic FingerSensingPad id=11 And in my Xorg.0.log: [ 17.481] (II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/event6) [ 17.481] () FSPPS/2 Sentelic FingerSensingPad: Applying InputClass "evdev pointer catchall" [ 17.481] () FSPPS/2 Sentelic FingerSensingPad: always reports core events [ 17.481] () FSPPS/2 Sentelic FingerSensingPad: Device: "/dev/input/event6" [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found 11 mouse buttons [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found scroll wheel(s) [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found relative axes [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found x and y relative axes [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Configuring as mouse [ 17.500] () FSPPS/2 Sentelic FingerSensingPad: YAxisMapping: buttons 4 and 5 [ 17.500] (**) FSPPS/2 Sentelic FingerSensingPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 17.500] (II) XINPUT: Adding extended input device "FSPPS/2 Sentelic FingerSensingPad" (type: MOUSE) [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: initialized for relative axes. [ 17.500] (II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/mouse0)

  Read the article

• Ubuntu 12.04 OpenCL with Intel and Radeon?

  - by Steve

  I want to setup my Ubuntu 12.04 with OpenCL(Open Computing Language) support for i7 2600k and Radeon HD5870. My Monitor is connected to the integrated Graphics of the i7. Intel OpenCL SDK is installed and working. Iteration of avaliable OpenCL devices shows 2 entries for Intel. As recommended I installed AMD APP SDK 2.6 first and then the fglrx driver. I installed fglrx from Ubuntu repositories. This works fine till here. When I run aticonfig --inital -f and restart the system I get into trouble. Xorg starts only in low-graphics mode. cat /var/log/Xorg.0.log [ 21.201] X.Org X Server 1.12.2 Release Date: 2012-05-29 [ 21.201] X Protocol Version 11, Revision 0 [ 21.201] Build Operating System: Linux 2.6.24-29-xen x86_64 Ubuntu [ 21.201] Current Operating System: Linux chimera 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_ [ 21.201] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=c137757b-486b-4514-9dfe-00c97662 [ 21.201] Build Date: 05 June 2012 08:35:55AM [ 21.201] xorg-server 2:1.12.2+git20120605+server-1.12-branch.aaf48906-0ubuntu0ricotz~precise (For technical suppor [ 21.201] Current version of pixman: 0.26.0 [ 21.201] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 21.201] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 21.201] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 14:22:36 2012 [ 21.247] (==) Using config file: "/etc/X11/xorg.conf" [ 21.247] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 21.450] (==) ServerLayout "aticonfig Layout" [ 21.450] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 21.450] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 21.451] (**) | |-->Device "aticonfig-Device[0]-0" [ 21.451] (==) Automatically adding devices [ 21.451] (==) Automatically enabling devices [ 21.466] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.473] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 21.473] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib [ 21.473] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 21.473] (II) Loader magic: 0x7f0ad3b9ab00 [ 21.473] (II) Module ABI versions: [ 21.473] X.Org ANSI C Emulation: 0.4 [ 21.473] X.Org Video Driver: 12.0 [ 21.473] X.Org XInput driver : 16.0 [ 21.473] X.Org Server Extension : 6.0 [ 21.473] (--) PCI:*(0:0:2:0) 8086:0122:1458:d000 rev 9, Mem @ 0xfb800000/4194304, 0xe0000000/268435456, I/O @ 0x00 [ 21.473] (--) PCI: (0:1:0:0) 1002:6898:1787:2289 rev 0, Mem @ 0xd0000000/268435456, 0xfbdc0000/131072, I/O @ 0x000 [ 21.473] (II) Open ACPI successful (/var/run/acpid.socket) [ 21.473] (II) "extmod" will be loaded by default. [ 21.473] (II) "dbe" will be loaded by default. [ 21.473] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 21.473] (II) "record" will be loaded by default. [ 21.473] (II) "dri" will be loaded by default. [ 21.473] (II) "dri2" will be loaded by default. [ 21.473] (II) LoadModule: "glx" [ 21.732] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libgl [ 21.934] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 21.934] compiled for 6.9.0, module version = 1.0.0 [ 21.934] (II) Loading extension GLX [ 21.934] (II) LoadModule: "extmod" [ 22.028] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 22.041] (II) Module extmod: vendor="X.Org Foundation" [ 22.041] compiled for 1.12.2, module version = 1.0.0 [ 22.041] Module class: X.Org Server Extension [ 22.041] ABI class: X.Org Server Extension, version 6.0 [ 22.041] (II) Loading extension MIT-SCREEN-SAVER [ 22.041] (II) Loading extension XFree86-VidModeExtension [ 22.041] (II) Loading extension XFree86-DGA [ 22.041] (II) Loading extension DPMS [ 22.041] (II) Loading extension XVideo [ 22.041] (II) Loading extension XVideo-MotionCompensation [ 22.041] (II) Loading extension X-Resource [ 22.041] (II) LoadModule: "dbe" [ 22.041] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 22.066] (II) Module dbe: vendor="X.Org Foundation" [ 22.066] compiled for 1.12.2, module version = 1.0.0 [ 22.066] Module class: X.Org Server Extension [ 22.066] ABI class: X.Org Server Extension, version 6.0 [ 22.066] (II) Loading extension DOUBLE-BUFFER [ 22.066] (II) LoadModule: "record" [ 22.066] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 22.077] (II) Module record: vendor="X.Org Foundation" [ 22.077] compiled for 1.12.2, module version = 1.13.0 [ 22.077] Module class: X.Org Server Extension [ 22.077] ABI class: X.Org Server Extension, version 6.0 [ 22.077] (II) Loading extension RECORD [ 22.077] (II) LoadModule: "dri" [ 22.077] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 22.082] (II) Module dri: vendor="X.Org Foundation" [ 22.082] compiled for 1.12.2, module version = 1.0.0 [ 22.082] ABI class: X.Org Server Extension, version 6.0 [ 22.082] (II) Loading extension XFree86-DRI [ 22.082] (II) LoadModule: "dri2" [ 22.082] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 22.083] (II) Module dri2: vendor="X.Org Foundation" [ 22.083] compiled for 1.12.2, module version = 1.2.0 [ 22.083] ABI class: X.Org Server Extension, version 6.0 [ 22.083] (II) Loading extension DRI2 [ 22.083] (II) LoadModule: "fglrx" [ 22.083] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_dr [ 22.399] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 22.399] compiled for 1.4.99.906, module version = 8.96.4 [ 22.399] Module class: X.Org Video Driver [ 22.399] (II) Loading sub module "fglrxdrm" [ 22.399] (II) LoadModule: "fglrxdrm" [ 22.399] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdr [ 22.445] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 22.445] compiled for 1.4.99.906, module version = 8.96.4 [ 22.445] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4 [ 22.445] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7 [ 22.445] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50 [ 22.445] (++) using VT number 7 [ 22.445] (WW) Falling back to old probe method for fglrx [ 23.043] (II) Loading PCS database from /etc/ati/amdpcsdb [ 23.082] (--) Chipset Supported AMD Graphics Processor (0x6898) found [ 23.107] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 23.107] (II) fglrx: intel VGA device detected, load intel driver. [ 23.107] (II) LoadModule: "intel" [ 23.211] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 23.475] (II) Module intel: vendor="X.Org Foundation" [ 23.475] compiled for 1.12.2, module version = 2.19.0 [ 23.475] Module class: X.Org Video Driver [ 23.475] ABI class: X.Org Video Driver, version 12.0 [ 23.476] ukiDynamicMajor: found major device number 249 [ 23.476] ukiDynamicMajor: found major device number 249 [ 23.476] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 23.476] ukiOpenDevice: node name is /dev/ati/card0 [ 23.476] ukiOpenDevice: open result is 8, (OK) [ 23.476] ukiOpenByBusid: ukiOpenMinor returns 8 [ 23.476] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 23.540] (WW) PowerXpress feature is not supported [ 23.540] (EE) No devices detected. [ 23.540] (==) Matched intel as autoconfigured driver 0 [ 23.540] (==) Matched vesa as autoconfigured driver 1 [ 23.540] (==) Matched fbdev as autoconfigured driver 2 [ 23.540] (==) Assigned the driver to the xf86ConfigLayout [ 23.540] (II) LoadModule: "intel" [ 23.540] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 23.540] (II) Module intel: vendor="X.Org Foundation" [ 23.540] compiled for 1.12.2, module version = 2.19.0 [ 23.540] Module class: X.Org Video Driver [ 23.540] ABI class: X.Org Video Driver, version 12.0 [ 23.540] (II) UnloadModule: "intel" [ 23.540] (II) Unloading intel [ 23.540] (II) Failed to load module "intel" (already loaded, 32522) [ 23.540] (II) LoadModule: "vesa" [ 23.583] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 23.620] (II) Module vesa: vendor="X.Org Foundation" [ 23.620] compiled for 1.12.2, module version = 2.3.1 [ 23.620] Module class: X.Org Video Driver [ 23.620] ABI class: X.Org Video Driver, version 12.0 [ 23.620] (II) LoadModule: "fbdev" [ 23.620] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 23.661] (II) Module fbdev: vendor="X.Org Foundation" [ 23.661] compiled for 1.12.2, module version = 0.4.2 [ 23.661] Module class: X.Org Video Driver [ 23.661] ABI class: X.Org Video Driver, version 12.0 [ 23.661] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4 [ 23.661] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7 [ 23.661] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50 [ 23.661] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2) [ 23.661] (II) VESA: driver for VESA chipsets: vesa [ 23.661] (II) FBDEV: driver for framebuffer: fbdev [ 23.661] (++) using VT number 7 [ 23.661] (WW) xf86OpenConsole: setpgid failed: Operation not permitted [ 23.661] (WW) xf86OpenConsole: setsid failed: Operation not permitted [ 23.661] (WW) Falling back to old probe method for fglrx [ 23.661] (II) Loading PCS database from /etc/ati/amdpcsdb [ 23.661] (WW) Falling back to old probe method for vesa [ 23.661] (WW) Falling back to old probe method for fbdev [ 23.661] (EE) No devices detected. [ 23.661] Fatal server error: [ 23.661] no screens found [ 23.661] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 23.661] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 23.661] xorg.conf: cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Is there a way to get the Radeon to work in a hybrid configuration or to use the Radeon as an OpenCL only device?

  Read the article

• samba share not on network after upgrading to Ubuntu 12.04LTS.

  - by Sylvain Huard

  I just upgraded an old Ubuntu box to 12.04LTS (machine named A-Ubuntu). This is an upgrade not a format re-install. All the accounts and config were preserved. The basic setup is a local network with 2 Ubuntu machines (let say A-Ubuntu, B-Ubuntu) and a MAC (C-MAC). Before the upgrade, all of them could see each other by their names not only the IP address. The local network has a D-Link Router where everybody is connected with RJ-45 wired etherenet (not wi-fi). Since the A-Ubuntu upgrade, we can't see this machine name on the Network and its name is not on machine list in the D-Link router anymore. We can see it's IP address only. I can't access A-Ubuntu from the other two by its name but I can ping it with its address (192.168.0.109). From A-Ubuntu, I can connect and see the shared samba folders on B-Ubuntu and C-MAC. But from B-Ubuntu and C-MAc, I can't connect to A-Ubuntu. Correct me if I'm wrong but this tells me that Samba should be fine and the real problem is that A-Ubuntu does not advertise its name on the Network so the D-Link does not have it in its table so nobody else finds it. After a lot of googling, I see that it is the job of avahi and mdns to do so. Those packages are running, I checked multiple config files for samba, avahi, mdns to see as if it is like the examples on the WEB and also similar to what I find on the working B-Ubuntu machine. This is the same. I did multiple service restart with samba, avahi, remove the firewall to make sure it does not block the hostname broadcast. I rebooted multiple time to make sure the update I was making were effective. Still, Can't see the A-Ubuntu name on the network. Any idea what it can be?, Where to look next?

  Read the article

• Ubuntu 12.04.2 Dual boot UEFI Windows 8 Preinstalled CX21903W Ultrabook

  - by user180782

  Hi i have a problem trying to install ubuntu. The machine is a CX Ultrabook model CX.21903W Intel I5 with 500GB hard disk, 8 GB ram and 32 GB SSD. From Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported), and according to the steps guide: 1 - We create a partition from Win8 (70 GB) from the own win8 program. 2 - Confirm-SecureBootUEFI=True. 3 - From Win8, shift + Restart and from special menu we selected the UEFI Firmware Setting. 4 - From BIOS Option: ------Option 1) Disable Secure Boot. ------Option 2) Disable UEFI (Not Available) from Option 1: Three ways is available. With Secure Boot enable - We can't even boot ubuntu. A red windows saying Soft unproper signed. With Secure Boot disable - and this config in boot device order: ----1: UEFI: USB ----2: Windows Boot Manger ----3: Others and CSM (Compatibility Support Module): enable - GRUB appears and selecting try Ubuntu then a black windows appears and nothing happens. The same result if install ubuntu is selected. With Secure Boot disable - and this config in boot device order: ----1: USB (No UEFI) ----2: Windows Boot Manger ----3: Others and CSM (Compatibility Support Module): enable - GRUB appears and selecting try Ubuntu, - Ubuntu boots and we can install it even. 5 - Rebooting and just changing the boot order as ----1: Ubuntu [] ----2: Windows Boot Manger ----3: Others then nothings happens. 6 - Booting from LiveUSB again and, as per instructed, making Boot-Repair (A warning windows: Ubuntu is working in legacy mode.). 7 - Saving changes and rebooting, Grub works but selecting Ubuntu, a black windows appears and nothing happens. Selecting Win8, Win8 boots and works. Untill now we can't make the ubuntu installation. Any suggestion will be welcomed. kind regards and thanks in advance.

  Read the article

• Source-control your BI Publisher reports

  - by Dmitry Nefedkin

  Version control systems (VCS) like Subversion, Git and the others has been widely adopted and became the must-have tool in any software development project. Source artifacts and checked out, modified, checked in, all the history of changes is tracked by the VCS.  But what if the development tool stores the source/configuration artifacts not in your laptop's hard drive, but in some shared repository instead? Well, we definitely need a way for export/import our artifacts from/to this repository.   Oracle BI Publisher report development approach is based on such a shared repository model (catalog), and starting from BI Publisher 11.1.1.5 Oracle ships Catalog Utility, which can be utilized to export/import the reports from the command line.  To start using the BI Publisher Catalog Utility you should: Go to the file system of the server where BI Publisher binaries has been installed and locate the following file: <MW_HOME>/Oracle_BI1/clients/bipublisher/BIPCatalogUtil.zip Copy the file to your local filesystem and unzip it. I will refer to this unzipped directory as <BIP_CLIENT_DIR> below If you do not want to pass server BI Publisher server URL, username and password during each invocation, modify the corresponding values inside <BIP_CLIENT_DIR>/config/xmlp-client-config.xml Open the terminal window and go to <BIP_CLIENT_DIR>/bin Make sure that the following environment variables are set: JAVA_HOME, ORACLE_HOME Now it's time to run the utility: if you are on Linux - just run BIPCatalogUtil.sh and pass the parameters according to the utility documentation if you are on MS Windows the bad news are that the command script for MS Windows is missing, and support.oracle.com note 1333726.1 says that a temporary solution is "create a .cmd file by setting up a classpath and copying the same commands from the .sh script". The good news are that I've created this script already,  please download the it from GitHub Hope you will find this utility useful during you day-by-day BI Publisher development. 

  Read the article

• Error when running debuild on package source

  - by Chris Wilson

  I'm attempting to build the squeak-vm source but am getting an error every time I do so. The output is: dpkg-buildpackage -rfakeroot -D -us -uc dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package squeak-vm dpkg-buildpackage: source version 1:4.0.3.2202-2 dpkg-buildpackage: source changed by José L. Redrejo Rodríguez <[email protected]> dpkg-source --before-build squeak-vm-4.0.3.2202 dpkg-buildpackage: host architecture i386 fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp configure-stamp rm -f unix/cmake/config.sub unix/cmake/config.guess /usr/bin/make -f debian/rules unpatch make[1]: Entering directory `/home/notgary/Projects/squeak/squeak-vm-4.0.3.2202' QUILT_PATCHES=debian/patches \ quilt --quiltrc /dev/null pop -a -R || test $? = 2 Patch linex.patch does not remove cleanly (refresh it or enforce with -f) make[1]: *** [unpatch] Error 1 make[1]: Leaving directory `/home/notgary/Projects/squeak/squeak-vm-4.0.3.2202' make: *** [clean] Error 2 dpkg-buildpackage: error: fakeroot debian/rules clean gave error exit status 2 debuild: fatal error at line 1337: dpkg-buildpackage -rfakeroot -D -us -uc failed

  Read the article

• Java Not Recognized As Default Application

  - by John

  I just installed java according to this article, and 'java -version' displays java version "1.7.0_07" Java(TM) SE Runtime Environment (build 1.7.0_07-b10) Java HotSpot(TM) 64-Bit Server VM (build 23.3-b01, mixed mode) 'update-alternatives --config java' returns this: There are 2 choices for the alternative java (providing /usr/bin/java). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/bin/gij-4.6 1046 auto mode 1 /usr/bin/gij-4.6 1046 manual mode * 2 /usr/local/java/jdk1.7.0_07/bin/java 1 manual mode Press enter to keep the current choice[*], or type selection number: with update-alternatives --config javac (or javaws) returning similarly. however java isn't listed in the default applications menu when I click on a .jar file and go to "open with application". I tried to install java this way, and on the update-alternatives part of the command returned me: /etc/alternatives/[java,javac,javaws] is dangling, it will be updated with best choice I just confirmed that I can use java, as 'java -jar file.jar' does work. Just figured that I'd mention it, don't know why I didn't before, but when I right click on a .jar file, java 7 run-time isn't even listed there, it seems that the file-manager isn't recognizing it as a program, but it is there, and it does work...

  Read the article

• IdentityServer Beta 1 Refresh &amp; Windows Azure Support

  - by Your DisplayName here!

  I just uploaded two new releases to Codeplex. IdentityServer B1 refresh A number of bug fixes and streamlined extensibility interfaces. Mostly a result of adding the Windows Azure support. Nothing has changed with regards to setup. Make sure you watch the intro video on the Codeplex site. IdentityServer B1 (Windows Azure Edition) I have now implemented all repositories for Windows Azure backed data storage. The default setup assumes you use the ASP.NET SQL membership provider database in SQL Azure and Table Storage for relying party, client certificates and delegation settings. The setup is simple: Upload your SSL/signing certificate via the portal Adjust the .cscfg file – you need to insert your storage account, certificate thumbprint and distinguished name There is a setup tool that can automatically insert the certificate distinguished names into your config file Adjust the connection string for the membership database in WebSite\configuration\connectionString.config Deploy Feedback Feature-wise this looks like the V1 release to me. It would be great if you could give me feedback, when you find a bug etc. – especially: Do the built-in repository implementations work for you (both on-premise and Azure)? Are the repository interfaces enough to add you own data store or feature?

  Read the article

• WiFi can't reconnect after suspend/hibernate on Ubuntu 12.04.1

  - by CyberOPS

  I've had this problem since Ubuntu 11.10 (my first install) but I was able to get around this issue with this answer. When I updated to Ubuntu 12.04 I encrypted the home folder, so I wasn't able to suspend or hibernate anymore (disappointing :l). Because of this and another issue I had1, I chose to reinstall. Sometime after I reinstalled, I was reminded about reconnection issue because it wasn't working after I suspended. I tried to use the same fix as before but I couldn't get it to work. I've also tried a couple other different fixes I found around the web but they didn't work. Since I'm new to linux, I'm gonna have a tough time figuring this out by myself. So does anyone know how, or what I need to figure out how, to fix this? Info: Computer: HP Pavilion dv6t-6b00 CTO Quad Edition Entertainment Notebook PC Network Card: Intel® Centrino® Wireless-N 1000 OS: Ubuntu 12.04.1 (x64) dual booting with Windows 7 (x64) (Not using Wubi) Wireless Card Driver: Intel Wireless WiFi Link drivers for Linux (iwlwifi) 1 - ntfs-config caused colord to crash on startup, even after NTFS-Config was removed.

  Read the article

• Leveraging .Net 4.0 Framework Tools For Encrypting Web Configuration Sections

  - by Sam Abraham

  I would like to share a few points with regards to encrypting web configuration sections in .Net 4.0. This information is also applicable to .Net 3.5 and 2.0. Two methods can work perfectly for encrypting connection strings in a Web project configuration file:   1-Do It All Yourself! In this approach, helper functions for encrypting/decrypting configuration file content are implemented. Program would explicitly retrieve appropriate content from configuration file then decrypt it appropriately.  Disadvantages of this implementation would be the added overhead for maintaining the encryption/decryption code as well the burden of always ensuring sections are appropriately decrypted before use and encrypted appropriately whenever edited.   2- Leverage the .Net 4.0 Framework (The Way to go!) Fortunately, all needed tools for protecting configuration files are built-in to the .Net 2.0/3.5/4.0 versions with very little setup needed. To encrypt connection strings, one can use the ASP.Net IIS Registration Tool (Aspnet_regiis.exe). Note that a 64-bit version of the tool also exists under the Framework64 folder for 64-bit systems. The command we need to encrypt our web.config file connection strings is simply the following:   Aspnet_regiis –pe “connectionstrings” –app “/sampleApplication” –prov “RsaProtectedConfigurationProvider”   To later decrypt this configuration section:   Aspnet_regiis –pd “connectionstrings” –app “/SampleApplication”   The following is a brief description of the command line options used in the example above. Aspnet_regiis supports many more options which you can read about in the links provided for reference below.   Option Description -pe  Section name to encrypt -pd  Section name to decrypt -app  Web application name -prov  Encryption/Decryption provider   ASP.Net automatically decrypts the content of the Web.Config file at runtime so no programming changes are needed.   Another tool, aspnet_setreg.exe is to be used if certain configuration file sections pertinent to the .Net runtime are to be encrypted. For more information on when and how to use aspnet_setreg, please refer to the references below.   Hope this helps!   Some great references concerning the topic:   http://msdn.microsoft.com/en-us/library/ff650037.aspx http://msdn.microsoft.com/en-us/library/zhhddkxy.aspx http://msdn.microsoft.com/en-us/library/dtkwfdky.aspx http://msdn.microsoft.com/en-us/library/68ze1hb2.aspx

  Read the article

• Tor Browser Failing to Load

  - by Ben

  Dec 12 22:32:25.313 [notice] Tor v0.2.3.22-rc (git-4a0c70a817797420) running on Linux. Dec 12 22:32:25.313 [notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning Dec 12 22:32:25.313 [notice] Read configuration file "/etc/tor/torrc". Dec 12 22:32:25.319 [notice] Initialized libevent version 2.0.19-stable using method epoll (with changelist). Good. Dec 12 22:32:25.319 [notice] Opening Socks listener on 127.0.0.1:9050 Dec 12 22:32:25.319 [warn] Could not bind to 127.0.0.1:9050: Address already in use. Is Tor already running? Dec 12 22:32:25.319 [warn] Failed to parse/validate config: Failed to bind one of the listener ports. Dec 12 22:32:25.319 [err] Reading config failed--see warnings above. I've tried reinstalling it and I always get this error after powering off and back on, despite it working fine directly after the install...

  Read the article

• .htaccess do not work without index.php on CodeIgniter

  - by Mattia

  I have read a lot of topic with the same problem but I do not find the solution. I have a LAMP into Ubuntu server. My document root is /home/utente/ into this dir I have another dir (turni) with a CodeIgniter web app. The web app works fine with the index.php into the URL, but I want to eliminate it. I have this configuration: config.php into CodeIgniter: $config['index_page'] = ''; .htaccess: RewriteEngine On RewriteBase / RewriteCond %{REQUEST_URI} ^system.* RewriteRule ^(.*)$ /index.php?/$1 [L] RewriteCond %{REQUEST_URI} ^application.* RewriteRule ^(.*)$ /index.php?/$1 [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?/$1 [L] /etc/apache2/sites-available/default: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /home/utente <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/utente/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> When I open a link of the web app without index.php into the URL, the server show me this error: The requested URL /turni/auth/login was not found on this server. Why? If I put the index.php like /turni/index.php/auth/login all works fine.

  Read the article

• CodePlex Daily Summary for Sunday, June 09, 2013

  CodePlex Daily Summary for Sunday, June 09, 2013Popular ReleasesZXMAK2: Version 2.7.5.5: - several fixes for joystick scanVG-Ripper & PG-Ripper: PG-Ripper 1.4.13: changes NEW: Added Support for "ImageJumbo.com" links FIXED: Ripping of Threads with multiple pagesCKEditor™ Provider for DotNetNuke®: CKEditor Provider 2.00.05: Whats New Updated to CKEditor 4.1.1 Added Auto Save Function (autosave plugin) {Delay can be defined in the Config - Default is 25} New Setting to set the Default Link Type (Editor Config Tab) Added CodeMirror Plugin Settings to the Editor Config Tab Added WordCount Plugin Settings to the Editor Config Tab Added Maximum Upload File Size Info to the Upload Dialog Added Check for Maximum Upload Size on Quick Upload and File Browser Upload changes File-Browser: Fixed an Issue with S...Property Framework: Property Framework (binaries) Latest: Latest stable 6/8/2013xFunc: xFunc (2.2.0.0): Added: user functions;PHP Vulnerability Hunter: PHP Vulnerability Hunter 1.4.0.20 Alpha: PHP Vulnerability Hunter 1.4.0.20 AlphaXomega Framework: Xomega.Framework 1.4: Adding support for Visual Studio 2012 and .Net framework 4.5. Minor bug fixes and enhancements.sb0t v.5: sb0t 5.14: Stability fix in script engine. Avatar.exists property fixed in scripting. cb0t custom font protocol re-added and updated to support new Ares.ASP.NET MVC Forum: MVCForum v1.3.5: This is a bug release version, with a couple of small usability features and UI changes. All the small amount of bugs reported in v1.3 have been fixed, no upgrade needed just overwrite the files and everything should just work.Json.NET: Json.NET 5.0 Release 6: New feature - Added serialized/deserialized JSON to verbose tracing New feature - Added support for using type name handling with ISerializable content Fix - Fixed not using default serializer settings with primitive values and JToken.ToObject Fix - Fixed error writing BigIntegers with JsonWriter.WriteToken Fix - Fixed serializing and deserializing flag enums with EnumMember attribute Fix - Fixed error deserializing interfaces with a valid type converter Fix - Fixed error deser...Christoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.3 for VS2012: V2.3 - Release Date 6/5/2013 Items addressed in this 2.3 release Fixed bad namespace for BusinessController in one of the C# templates. Updated documentation in all templates. Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesPulse: Pulse 0.6.7.0: A number of small bug fixes to stabilize the previous Beta. Sorry about the never ending "New Version" bug!QlikView Extension - Animated Scatter Chart: Animated Scatter Chart - v1.0: Version 1.0 including Source Code qar File Example QlikView application Tested With: Browser Firefox 20 (x64) Google Chrome 27 (x64) Internet Explorer 9 QlikView QlikView Desktop 11 - SR2 (x64) QlikView Desktop 11.2 - SR1 (x64) QlikView Ajax Client 11.2 - SR2 (based on x64)BarbaTunnel: BarbaTunnel 7.2: Warning: HTTP Tunnel is not compatible with version 6.x and prior, HTTP packet format has been changed. Check Version History for more information about this release.SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.8: This release includes these changes below: Upgrade SuperSocket to 1.5.3 which is much more stable Added handshake request validating api (WebSocketServer.ValidateHandshake(TWebSocketSession session, string origin)) Fixed a bug that the m_Filters in the SubCommandBase can be null if the command's method LoadSubCommandFilters(IEnumerable<SubCommandFilterAttribute> globalFilters) is not invoked Fixed the compatibility issue on Origin getting in the different version protocols Marked ISub...BlackJumboDog: Ver5.9.0: 2013.06.04 Ver5.9.0 (1) ?????????????????????????????????($Remote.ini Tmp.ini) (2) ThreadBaseTest?? (3) ????POP3??????SMTP???????????????? (4) Web???????、?????????URL??????????????? (5) Ftp???????、LIST?????????????? (6) ?????????????????????Media Companion: Media Companion MC3.569b: New* Movies - Autoscrape/Batch Rescrape extra fanart and or extra thumbs. * Movies - Alternative editor can add manually actors. * TV - Batch Rescraper, AutoScrape extrafanart, if option enabled. Fixed* Movies - Slow performance switching to movie tab by adding option 'Disable "Not Matching Rename Pattern"' to Movie Preferences - General. * Movies - Fixed only actors with images were scraped and added to nfo * Movies - Fixed filter reset if selected tab was above Home Movies. * Updated Medi...Nearforums - ASP.NET MVC forum engine: Nearforums v9.0: Version 9.0 of Nearforums with great new features for users and developers: SQL Azure support Admin UI for Forum Categories Avoid html validation for certain roles Improve profile picture moderation and support Warn, suspend, and ban users Web administration of site settings Extensions support Visit the Roadmap for more details. Webdeploy package sha1 checksum: 9.0.0.0: e687ee0438cd2b1df1d3e95ecb9d66e7c538293b Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.93: Added -esc:BOOL switch (CodeSettings.AlwaysEscapeNonAscii property) to always force non-ASCII character (ch > 0x7f) to be escaped as the JavaScript \uXXXX sequence. This switch should be used if creating a Symbol Map and outputting the result to the a text encoding other than UTF-8 or UTF-16 (ASCII, for instance). Fixed a bug where a complex comma operation is the operand of a return statement, and it was looking at the wrong variable for possible optimization of = to just .Document.Editor: 2013.22: What's new for Document.Editor 2013.22: Improved Bullet List support Improved Number List support Minor Bug Fix's, improvements and speed upsNew ProjectsAcer 1420p Leaky Handle Fix: Fixes leaking handles on the Acer 1420p laptop given out at PDC09.Akismet Spam Filter for Community Server 2008.5: Akismet Spam Filter for Community Server 2008.5 Atom Timer: Atom Timer is a thread based time that allows schedules to be created using events.BRICK CMS: These Days,I am tired to listen that: .NET is going down and JAVA/Ruby/Python will replace it. yes,they have been growing up while .NET's going down. do or die?DataTestFramework: ???????&ORM??????Date/Time Interval: The Date Time Interval allows for different types of interval to be created. The class will enumerate the defined interval support LINQ statements. More informaDimas.Net: .net infrastructure to create a web/service server from scratch. it includes n-tier , log , policy injection , mapper , MVC best prictice and etc.Gannet: Gannet is an operating system for us (the target developers) to learn about how an Operating System is put together and what components are needed.Image Resize For Android: Android????????????LightBlog: LightBlog?????Node.js，Express??，Mongodb???markdown??????????Memory: Live artistic interaction using KinectNestedHtmlWriter: This is a helper class library for writing simple HTML document, by using statement in C#.Operation Sneak Peek: Windows Phone game that includes stealth+logic gameplay. Player has to look for hidden letters to discover a secret word and use it to defuse a bomb.Orchard DarkStripes Theme: Orchard theme based on Octopress DarkStripesPath copy from context menu: ????????????????????????????Phantomas: mouhouhahahahaSE1: NO SUMMARY ! SiteLinks DNN Module: The SiteLinks DNN module is a module for displaying a list of existing links on your DNN website. This module works in similarly to the DNN "Links" skin object.sql to object maping: SqlString CodeMapTCP/IP Communication Framework: TCP/IP Communication Framework (TCP/IP CF) is a library that wraps the .NET Socket class and defines several classes for developing communication applications..UTorrentClient Api: UTorrentClient Api is an extensible set of classes that use WebUI to manipulate µTorrent remotely.Visual Studio Spell Checker: A Visual Studio editor extension that checks the spelling of comments, strings, and plain text as you type. Supports configuration and various languages.zjsru_xyw: this is a test projectZTrans: ztrans is language for embedded software development???: test?????????: ??????????? ????：VS2012+SQL2012 ????：ASP.NET(.NET 4.0) ????：MVC3+EF5 ????： ?????，??，?? ???????，??，?? ????????，??，?? ????DIV+CSS?? Jquery??1.6.4 ??Ajax??????

  Read the article

• Setting up dual monitors, Xorg.conf issues

  - by JTS

  I just got a new computer (W520, Graphics card nVidia GF106 [Quadro 2000]) and installed ubuntu on it using wubi. I have everything working, so I wanted to set it up to be able to use two monitors with an extended screen. I figured I had to edit Xorg.conf, but the file didnt exist. So I tried to create it by booting in recovery mode, and executing Xorg -configure but I am getting these errors: (EE) Failed to load module "vmwgfx" (module does not exist, 0) (EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) [drm] No DRICreatedPCIBusID symbol Number of created screens does not match number of detected devices. Configuration failed. ddxSigGiveUp: Closing log Any idea how I can get Xorg -configure to work, so that I can have an xorg.conf file that I can edit to enable twinview? EDIT: Another way I could ask the same question to solve this problem is, why can't I boot with an xorg.conf file generated by nvidia-xconfig? Is there something in the generated xorg.conf file that might need editing?

  Read the article

• Ping Access to a Nested VM !! Plz Help

  - by Shivaramakrishnan

  I have a problem in communication between the host and the nested VM.This is my layout. I have installed KVM on host machine having a single nic interface (public ip) running Ubuntu.On top of this,I have VM running Ubuntu.I have installed KVM in this VM too.I then have a VM inside this running a web server. I am able to ping the host from this web server VM and ssh into it.But from host to VM ,ping is being unsuccessful. The VM (named L1hyp) on host was created using libvirt-manager and has IP of 192.168.122.8. The vswitch interface created at host is in default config (NAT-ed). Its IP is 192.168.122.1. Now this VM is also having a vswitch interface which is in default config (NAT-ed).Its IP is 192.168.100.1. The Web server VM is created on top of this L1hyp VM, is having an IP of 192.168.100.186. The Webserver VM uses 192.168.100.1 as its default gw. The L1hyp uses 192.168.122.1 as its default gw. From Host: ping 192.168.122.8 - SUCCEEDS ping 192.168.122.1 - SUCCEEDS ping 192.168.100.1 - SUCCEEDS ping 192.168.100.186 - FAILS Comes up with Destination Host Unreachable From 192.168.122.1. But there is route to 192.168.100.0/24 subnet from host.Ping to 192.168.100.1 succeeds. From Webserver VM: ping 192.168.100.1 - SUCCEEDS ping 192.168.122.1 - SUCCEEDS SSH from web server VM to host succeeds. Can anyone help me out what needs to be modified to have two way communication between the host and Webserver VM at the earliest? I am pondering over this problem for over a week now.

  Read the article

• Controlling access to site folders if you cannot user Roles

  - by DavidMadden

  I find myself on an assignment where I could not use System.Web.Security.Roles.  That meant that I could not use Visual Studio's Website | ASP.NET Configuration.  I had to go about things another way.  The clues were in these two websites:http://www.csharpaspnetarticles.com/2009/02/formsauthentication-ticket-roles-aspnet.htmlhttp://msdn.microsoft.com/en-us/library/b6x6shw7(v=VS.71).aspxhttp://msdn.microsoft.com/en-us/library/b6x6shw7(v=VS.71).aspxYou can set in your web.config the restrictions on folders without having to set the restrictions in multiple folders through their own web.config file.  In my main default.aspx file in my protected subfolder off my main site, I did the following code due to MultiFormAuthentication (MFA) providing the security to this point:        string role = string.Empty;         if (((Login)Session["Login"]).UserLevelID > 3)         {             role = "PowerUser";         }         else         {             role = "Newbie";         }         FormsAuthenticationTicket ticket =  new FormsAuthenticationTicket( 1,                 ((Login)Session["Login"]).UserID,                 DateTime.Now,                 DateTime.Now.AddMinutes(20),                 false,                 role,                 FormsAuthentication.FormsCookiePath);         string hashCookies = FormsAuthentication.Encrypt(ticket);         HttpCookie cookie =  new HttpCookie(FormsAuthentication.FormsCookieName, hashCookies);         Response.Cookies.Add(cookie); This all gave me the ability to change restrictions on folders without having to restart the website or having to do any hard coding.

  Read the article

• How do I get an application to appear as a choice in update-alternatives?

  - by Jay

  I separately installed the Firefox Beta and Alpha channels, and have desktop configuration files pointing to them in ~/.local/share/applications. However, stable Firefox is being used as my default browser by the system. (Firefox Beta used to be used until I messed with the "Default Applications" in System Settings, where it is not listed.) I tried running sudo update-alternatives --config x-www-browser to manually change it, but it's only recognizing Chromium and Firefox (stable) and showing them as a choice. What can I do to get custom desktop configuration files in ~/.local/share/applications to be seen as default alternatives? I think I may have to fiddle with the desktop config files, or with mimeinfo.cache or mimeapps.list? Running Oneiric. Here is the content of the firefox-beta.desktop file I created: [Desktop Entry] Name=Firefox Beta Exec=firefox-beta -P Beta -no-remote Icon=firefox Terminal=false X-MultipleArgs=false Type=Application StartupNotify=true StartupWMClass=Firefox Categories=GNOME;GTK;Network;WebBrowser; Comment[en_US]=Firefox Beta Channel MimeType=text/html;text/xml;application/xhtml+xml;application/xml;application/vnd.mozilla.xul+xml;application/rss+xml;application/rdf+xml;image/gif;image/jpeg;image/png;x-scheme-handler/http;x-scheme-handler/https;x-scheme-handler/ftp;x-scheme-handler/chrome;video/webm; Name[en_US]=Firefox Beta [NewWindow Shortcut Group] Name=Open a New Window Exec=firefox-beta -new-window about:blank TargetEnvironment=Unity

  Read the article

• Ubuntu 12.04 nomodeset fixes boot problem but causes screen resolution to get stuck

  - by Thunder

  I've been searching the askubuntu forum for the past 3 days trying to figure out what's going on with my system and I have tried a lot of things but to no avail. So, I will explain my situation and tell you what I have tried and I hope someone can help me :) I have an: HP Workstation xw4100 Pentium(R) 4 3.00 GHz 1.5 GB RAM NVIDIA Quadro4 380 XGL graphics card It came with Windows XP and I set it up (with WUBI) to dual boot with Ubuntu 12.04 After installation I had the problem that so many people had with it booting to a black screen (mine was actually booting to the terminal basic shell) that is fixed by adding nomodeset into the grub. When I do that, MY screen resolution becomes stuck in 1280x768 (as opposed to 1366x768 before adding nomodeset) (and also, when running XP the best resolution is 1280x720) When I go to "additional drivers" it doesn't show any proprietary drivers, so I manually downloaded them using this command: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current but after rebooting, that made the graphics even worse (now stuck as 800x600) SO I tried to configure the drivers with sudo nvidia-xconfig but that simply created an empty xorg.config file. I found one place where a guy gave information to manually input into the xorg.config file but that had no effect at all. Lastly I tried to install previous versions of the NVIDIA drivers, but they wouldn't even fully install. So now I have just re-installed Ubuntu 12.04 and I either need to find a better solution to the first problem (nomodeset) or get the nouveau driver to correctly configure to work with my nvidia graphics. Thanks for your help ahead of time!

  Read the article

• Impossible to select folders and files with mouse (Ubuntu 12.04)

  - by François

  First-time post for me here (after being a regular reader for two years though) so thank you all for the quality of replies and help provided. My problem is very simple apparently but a tricky one. I just installed the Ubuntu 12.04(1) along with the Gnome3-shell environment on my new pc desktop Acer Aspire X3995 (see config below). Everything work (more or less) so far (I still have problems of sound and disabled 2-fingers gestures with my screen -- which I will have to deal with xconfig settings I think -- though), but the main problem is that I cannot select files/folders with my USB mouse. When I try to double click on them, nothing happen (sometimes one folder or file is selected but then unselected again). Note that the navigation works perfectly from the USB keyboard and from the touch-screen (I am using a 23" wide touch-screen Acer Monitor T231Hbmid). Also, the mouse works perfectly with other menu navigation, with the only difference that the text of certain menus is selected as if I was holding the left click on them. So I assume the problem is only related to the mouse. Needless to say that the usual basic hardware checks have been performed (unplugging, powered-off, etc.). My level is simply "advanced user", meaning that if you provide me with intelligible input I should find my way, but please don't expect too much technical/specific knowledge... :) Please let me know if you need more information on this bug. Now, fingers crossed... and thanks in advance! Ciao, François Config of Acer Aspire X3995: Ubuntu 12.04 / Gnome3-shell environment / Intel Core i5 3450 / nVidia GeForce 605, 1Gb. Screen: Acer Monitor TFT 23" wide T231Hbmid

  Read the article

• Ubuntu 13.04 client cannot connect to Raspbian samba share

  - by envoyweb

  I have a client Ubuntu 13.04 machine trying to connect to a server running Raspbian with samba and samba-common-bin installed on the server I can see my share and when I try to login I get this error: Unable to access location: Failed to write windows share Cannot allocate memory. I have installed ntfs-3g for the usb hard drive that already auto mounts on the server so I never had to create a directory or edit fstab. Testparm on the server states the following: [global] workgroup = ENVOYWEB server string = %h server map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [homes] comment = Home Directories valid users = %S create mask = 0700 directory mask = 0700 browseable = No [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [BigDude] comment = Sharing BigDude's Files path = /media/BigDude/ valid users = @users read only = No create mask = 0755 testparm on the client which is running ubuntu is as follows [global] workgroup = ENVOYWEB server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers

  Read the article

• Do you know how to move the Team Foundation Server cache

  - by Martin Hinshelwood

  There are a number of reasons why you may want to change the folder that you store the TFS Cache. It can take up “some” amount of room so moving it to another drive can be beneficial. This is the source control Cache that TFS uses to cache data from the database. Moving the Cache is pretty easy and should allow you to organise your server space a little more efficiently. You may also get a performance improvement (although small) by putting it on another drive.. Create a new directory to store the Cache. e.g. “d:\TfsCache\” Give the local TFS WPG group full control of the directory Figure: You need to use the App Tier service WPG In the application tier web.config (~\Application Tier\Web Services\web.config) add the following setting (to the appSettings section). <appsettings> ... <add value="D:\" key="dataDirectory" /> ... </appsettings> The app pool will automatically recycle and Team Web Access will start using the new location.  If you then download a file (not via a proxy) a folder with a GUID should be created immediately in the folder from #1.  If the folder doesn’t appear, then you probably don’t have permissions set up properly.

  Read the article

• How to get httpd to forward to multiple tomcats for different urls, including / ?

  - by Nick Foote

  Ok So I've got multiple tomcat instances setup on several AJP ports, I also have Apache httpd listening on port 8090 (cos I've got another app already using 8080 at the moment). I've successfully mapped urls such as mydomain.com:8090/demo and mydomain.com:8090/preprod to their respective tomcat instances using Jk Mount and the following vhosts config; <VirtualHost *:8090> JkMount /preprod* preprod JkMount /demo* demo </VirtualHost> But I also want the "root" address to map to another tomcat instance, what will become live/production, ie I want mydomain.com:8090/ to map a 3rd tomcat instance. At the moment nothing happens or changes if I just add to the above config a line; JkMount /* rootwar if I browse to mydomain.com:8090 I just get the same boring apache httpd landing page letting me know its running (ie index.html in httpd/htdocs) Is it possible to use JkMount to redirect the "root" address stuff to a tomcat instance? I can see that a rule like /* will also match URLs like mydomain.com/preprod but I was hoping the rules are applied in order so if /* appears at the end it effectively would be a "if its not one of the other environments, then direct to root/production" Just to be clear I'm trying to setup the following; mydomain.com:8090/preprod --> myApp running in tomcat1 mydomain.com:8090/demo --> myApp running in tomcat2 mydomain.com:8090 --> myApp running in tomcat3

  Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >