Search Results

Search found 4731 results on 190 pages for 'ram rachum'.

Page 115/190 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

• HP Proliant DL360 G5 + MSA50 RAID Setup recommendations

  - by JohnRB

  I am running a HP Proliant DL360 2 x 3GHz Xeon 16GB Ram P400 integrated RAID card with 6 x 73GB SAS HDDs running Ubuntu Server 14.04 CLI only. I recently got my hands on a MSA50 SAS Enclosure (10 x SAS HDD bays w/ SAS in/out interface) and wondering what you guys recommended as far as an addon raid controller for one of the pciex slots. I have both slots free Full and Half sizes. Any suggestions are greatly appreciated, I am an I.T. Consultant but have not used these particular units before so I was hoping to hear from someone who has. Thanks!

  Read the article

• How do I overclock a dual core processor?

  - by Pankaj Bhardwaj

  This is a serious problem. I want to speed up my compilation process. I have never been especially fond of overclocking, however my current compilation time for my project makes my crazy! I found information about which parameters I should change to overclock and which values are safe. However, I have one basic problem. I don't have the ability to change this option in my BIOS. It is possible that these options have been blocked by the system administrators? Getting a faster processor is not an option. How do I edit the proper values to overclock my CPU. Do I need to flash my bios to another version? My specs: Entium Dual-Core Cpu E5400 @2.7GHz Asrock motherboard 4GB RAM Windows 7 Ultimate 32-bit

  Read the article

• Virtual Machine files on ramdisk doesn't run faster than on physical disk

  - by Landy

  I installed total 36G memory (4x8G + 2x2G) in the host (Windows 7) and I used ImDisk to create a 32G ramdisk and format it to NTFS file system. Then I copied the virtual machine (in VMware Workstation format) folder, including vmx, vmdk, etc... to the new created ram disk. Then I tried to power on it in VMware Workstation. What made me surprised is that the performance is not better than before. It cost almost the same time to power on the Windows 7 VM. I check the Resource Monitor in the Windows 7 host, and the statistics of CPU, disk, network are rather normal. The memory has reported 3000+ hard fault/sec when guest OS boot then drop to 0 after the guest powered on. Any idea about this issue? I had thought the performance of ramdisk will be better than physical disk in this case. Am I wrong? Thanks.

  Read the article

• Clear / Flush cached memory

  - by TheDave

  I have a small VPS with 6GB RAM hosting a couple of websites. Recently I have noticed that my cached memory size is quite high - see below: Cpu(s): 0.1%us, 0.1%sy, 0.0%ni, 99.1%id, 0.0%wa, 0.2%hi, 0.4%si, 0.0%st Mem: 6113256k total, 5949620k used, 163636k free, 398584k buffers Swap: 1048564k total, 104k used, 1048460k free, 3586468k cached After investigating if there is some method to have this flushed or cleared I stumbled upon a command which is: sync; echo 3 > /proc/sys/vm/drop_caches I read it could be useful to add this to a chron-task/job. Is this method recommended or could this lead to potential problems? The only concern I have is that I use one Magento installation on Memcached - could this have any negative effects on it? I am certainly not a pro therefore I would very much appreciate some expert advise. PS: My VPS runs on CentOS 5 x64 and I have WHM + NGINX installed.

  Read the article

• Are there significant performance difference between chipsets?

  - by Let_Me_Be

  I wanted to build a single PC to fit all my needs, but since hardware virtualization support (Vt-d specifically) is a huge problem, I decided to build multiple single-use oriented computers. In this scenario I want these computers to be as minimal as possible. So the core of my question is: "Are there significant performance difference between chipsets?" I'm considering Sandy-Bridge i7 or i5 for my "game console" computer. And since I will use only one graphic card, one or two HDD, 4-8GB RAM and nothing else, I would be fine with a micro-ATX board with a Q67 (or some other low-end chipset).

  Read the article

• Web Server for SVN+PHP+Django+Rails

  - by NetStudent

  Foreword: I am not asking for the differences between Nginx and Apache, nor do I want to start a "which one is better discussion. I would like to ask for help with choosing the most adequate solution for this particular situation. I need to setup one or more l SVN repositories accessible via HTTP, plus some PHP, Django and Ruby websites. However, and since I only have 512Mb of RAM at my disposal, I fear that Apache will be a too heavy choice... On the other hand, I have heard that Nginx does not fully support SVN (WebDAV) and Django without reverse proxying to Apache. Is this still true? Should I go for Apache/Nginx alone? Or should I set up both and have Nginx handling static content and proxying to Apacge for dynamic content?

  Read the article

• Linux only recognizes 800Mhz from 2Ghz

  - by Leo

  I tried with Suse 11 (KDE), Xubuntu 11.10 and Lubuntu 11.10 and these systems only recognizes 800Mhz from my processor of 2Ghz! The utilities I used are: linuxinfo, sysinfo, "system profiler and benchmark". And all of this only shows 800Mhz My system specs are: AMD Turion 64 Mobile MK36 512 RAM nVidia Geforce Go 6150 (I also tried with nVidia restricted drivers) 120GB Hard drive The weirdest thing is that Windows XP and 7 recognize the 2Ghz of my processor, What can I do? p.s. (It is not just the value of 800Mhz, I also feel my system very slow with linux)

  Read the article

• Minix3 on Vmware

  Hi, I install minix3 on vmware using installation CD i make using .iso image which is available @minix3 I make 2GB Harddisk, 512MB RAM on VMware, and installed step-by-step. It got installed and working fine. But i wana install 'packman' which is X window system. I'm not able to install it. It asks for installation CD, its still there and its detected also, but i couldn't proceed. Actually i install minix to learn Operating system design and Implementation :) Have any1 tried installing 'packman' i.e X window system on minix3. Please guide me. :)

  Read the article

• Rules to choose hardware for OLTP systems (sql server)

  - by Roman Pokrovskij

  Ok. We know database size, number of concurrent users, number of transactions per minute; should choose number of processors, RAID, RAM, mirroring and clustering. There are no exact rule.. but may be there are no rules at all? In my practice in every case I have "legacy" system, and after some inspections and interview I can form an opinion how hardware and design can be improved. But every time when I meet "absolutely" new system (I guess there are no new systems, but sometimes are such tasks) I can't say anything trustful. So I'm interesting how people deal with such tasks? They map task on theirs experience or have some base formulas?

  Read the article

• Simple UPDATE query with (sometime) long query times

  - by Eric

  I run a dedicated MySQL server (2 cores, 16GB RAM) serving 100-200 requests per second. It is getting sluggish during peak traffic and I have a hard time optimizing the server. So I'm looking for some ideas now that I have done lots of Innodb fine-tuning with the "TUNING PRIMER" The query that now generates most slow queries is the following (see result from mysqldumpslow): Count: 433 Time=3.40s (1470s) Lock=0.00s (0s) Rows=0.0 (0), UPDATE user_sessions SET tid='S' WHERE idsession='S' I am very surprised to have so many long queries for such a simple query with no locking. Fyi, the table is InnoDB and has 14000 rows. It contains all active sessions on the site with approx 10 UPDATE and SELECT hits per second. Here is its structure: CREATE TABLE `user_sessions` ( `personid` mediumint(9) NOT NULL DEFAULT '0', `ip` varchar(18) COLLATE utf8_unicode_ci NOT NULL, `idsession` varchar(32) COLLATE utf8_unicode_ci NOT NULL, `datum` date NOT NULL DEFAULT '0000-00-00', `tid` time NOT NULL DEFAULT '00:00:00', `status` tinyint(4) NOT NULL DEFAULT '0', KEY `personid` (`personid`), KEY `idsession` (`idsession`), KEY `datum` (`datum`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci Any ideas?

  Read the article

• SQL 2008 Memory Usage

  - by Danilo Brambilla

  I have a SQL Server 2008 (ver 10.0.1600) running on a Windows Server 2008 R2 Enterprise server with 8 GB of physical ram. If I open Task Manager I can see on 'Physical Memory' section of 'Performance' tab that only 340 MB are Available of 8191 Total, but I can't see any process using such amount of memory. Please note SQL Server is memory limited to 6GB (Maximum Server Memory = 6000). If I open Sysinternals Process Explorer, I can see sqlsrvr.exe process has: Private Bytes: 227.000 K Working Set: 140.000 K Virtual Size: 8.762.000 K What does this means? Is there any way to free up this memory for other process? Why Virtual Size figure as allocated memory? I thought that Virtual Size was 'reserved memory' only.

  Read the article

• ASUS K55VM Laptop unexpectedly shuts down

  - by Abhishek Sha

  I've read quite a few questions on SuperUser of people having laptop shutdown problems but mine is different. My laptop specs: Intel Core i7 3610QM (IvyBridge) NVIDIA GT630M 2GB and Intel GMA4000 8GB RAM Windows 7 64 Bit My laptop occasionally shuts down when playing FarCry 3. It's around 5 months old. I've played games like Crysis and it never shuts down unexpectedly. Since I experienced this shut down recently, I decided for GPU-Z to log the temperatures. The final log value at the time of shutdown were thus: GPU Core Clock [MHz] - 797.3 GPU Memory Clock [MHz] - 896.8 GPU Temperature [°C] - 89.0 GPU Load [%] - 99 Memory Controller Load [%] - 36 Video Engine Load [%] - 0 Memory Usage (Dedicated) [MB] - 535 Memory Usage (Dynamic) [MB] - 53 VDDC [V] - 1.0620 My drivers are up-to-date and I didn't encounter any BSODs at the time of shut down. It simply turns off.

  Read the article

• Need advice on PC components for high-end games but in limited budget

  - by Md Atif

  I need advise, I want to buy PC components which will be good for gaming as well as be under my budget. First thing I chose is Graphics card : ATI HD 7850 2GB DDR5 then matching things up with this selected following: Processor: AMD 3.5 GHz AM3 FX 8320 8 Core Piledriver Mobo: MSI 990FXA-GD65 RAM : 8GB DDR3 (4x2) Is this setup looks compatible? If making any of above component inferior will have negligible affect on performance/gaming(like buying 970 chip mobo instead of 990) then please let me know so I can save some money :) ? Any other advice?

  Read the article

• Debian Linux server hangs after a week or so

  - by Alex Flo

  I have 2 Debian Linux 6.0.4 servers that have a strange behaviour: after 5-7-10 days they hang. By this I mean the servers need to be restarted and before that ping won't answer. I've been struggling with this problem for a couple of months now and here's some thoughts/what I tried without being able to solve the problem. I changed the RAM on a server. Being 2 different servers I doubt that it could be something related to hardware as a 3rd identical server won't have this problem. I logged the server load and when it crashes the load is fine (quite low) I cannot find anything in the server logs, logs are fine till the server freezes. I don't have access to console unfortunately. While I have years of admin experience I have never encountered such an issue and right now I have no idea where else to investigate. If you have an idea of what I could try in order to fix the problem please share it with me:-)

  Read the article

• Is it better to always purchase as much as higher in Watts SMPS, for PC?

  - by metal gear solid

  Is it better to always purchase as much as higher in Watts SMPS, for PC? Does higer watts SMPS also consume more power (electricity bill)? How to know how much watts of SMPS we should purchase? What are factor who decide how much watt of power will need? I'm going to purchase a new Motherboard + CPU + HDD + RAM + DVD Wrtiter + SATA 500 GB HDD ? I'm not purchasing any external Graphic Card. How to decide which watt of SMPS ,I should purchase?

  Read the article

• Windows 7 as VM inside VMWare Fusion - 32 or 64 bit?

  - by webworm

  I have a MacBook Pro with the 2.4 Core 2 Duo and 4 GB RAM. I want to run Windows 7 for ASP.NET development within VMWare Fusion. Since I may be doing some SharePoint 2010 work I was thinking that my install of Windows 7 would need to be the 64 bit version because SharePoint 2010 requires 64 bit Windows. As I am new to Mac OS (I am running v10.6.3) I am not sure if it would support a 64 bit OS in a Virtual Machine. Thoughts?

  Read the article

• Is it safe to run an operating system from an USB flash drive?

  - by Georg

  I've got a laptop that has a broken harddisk controller. Replacing the motherboard is quite expensive. I thought about buying a flash drive and installing & running the system from it. However, I'm concerned about some things. Speed: Are they fast enough for swap memory (I've got only 1GB RAM installed.) I'm considering buying 2 or 3 of them and making them into a RAID. What about limited write cycles? How long will it last for a system that has a filesystem with journaling enabled? I'd hate to abandon it. Are there significant differences between internal SSD which are used in modern laptops like MacBooks and USB flash drives? What should I expect in 10 years when the memory wear starts kicking in?

  Read the article

• How do I backup my Ubuntu 9.10 system and then restore it to a new machine with different hardware?

  - by EricJLN

  I have a nicely configured Ubuntu 9.10 machine, with crossover linux (from Codeweavers) installed. I have the Nvidia drivers installed. Everything is just as I want it. Now I want to move to a new machine with different hardware: different sized hard drive, different size RAM, different video card, etc. I tried the technique suggested on Ubuntu forums, "Howto: Backup and restore your system!". The results: New system complains about swap not being found New system complains about not finding Nvidia hardware, and I can't open the System-Administration-Hardware Drivers application (i.e., /usr/bin/jockey-gtk) to fix the problem. As result of nvidia, X-Windows is throwing errors, and the on screen process for fixing X-Windows isn't working. How do I restore a backup of my old system, including my Crossover Linux installation, to a new machine with different hardware installed?

  Read the article

• What can cause peaks in pagetables in /proc/meminfo ?

  - by Fuzzy76

  I have a gameserver running Debian Lenny on a VPS host. Even when experiencing a fairly low load, the players start experiencing major lag (ping times rise from 50 ms to 150-500 ms) in bursts of 3 - 10 seconds. I have installed Munin server monitoring, but when looking at the graphs it looks like the server has plenty of CPU, RAM and bandwidth available. The only weird thing I noticed is some peaks in the memory graph attributed to "page_tables" which maps to PageTables in /proc/meminfo but I can't find any good information on what this might mean. Any ideas what might be causing this? If you need any more graps, just let me know. The interrupts/second count is at roughly 400-600 during this period (nearly all from eth0). The drop in committed was caused by me trying to lower the allocated memory for the server from 512MB to 256MB, but that didn't seem to help.

  Read the article

• How can I dual install Ubuntu 10.4 in a Mac Mini with 10.4.11?

  - by Marco Mariani

  I'd like to power-up my aging Mac Mini (1.5GHz Core Solo, 1GB RAM, Tiger 10.4.11) by installing a shiny Ubuntu alongside the current OS. After all, I use Ubuntu for everything save for cleaning my teeth. Since it's my first and only Mac and I have next to no experience with the OS (having used it basically as a media player) I am a little concerned about rEFIt, ELILO, Boot Camp and the fact that it's basically a 4.5 years old unsupported machine and I might get asleep reinstalling everything several times. I've used the live desktop-i386 CD and everything works. I tried with an external USB drive instead of a CD but couldn't make it boot. As for installing Ubuntu, the howtos I've found give several alternatives depending on the model, the OSX version, etc.. but they usually talk about newer machines. Which howto should I follow to repartition, and boot thereafter? Thanks

  Read the article

• Mounting root failed. Dropping into basic maintenance shell

  - by vmsystem

  Hi, I have purchased AMD Phenom X4 955 3.2GHZ processor with supporting gigabyte GA-MA785GM-US2H mother board / 6GB DDR2 RAM / 500GB SATA drive for learning Vmware ESX 3.5 product. In the above configuration, I have installed windows xp 64 bit operating systems and continue to installed vmware workstation 6.5. From the VM workstation, I can able to install ESX3.5 update2, but I unable to start properly, please refer the below mention error. “Mounting root failed. Dropping into basic maintenance shell. To collect logs for VMware, connect a USB storage device and run 'bin/vm-support '. Machine will be rebooted when you exit from this shell.” The same was tested in the windows 2003 Enterprise Edition server / windows 7 32bit / windows 7 64bit also, Please help me to resolve the issue.

  Read the article

• Dell Studio XPS 16 Runs Hot

  - by dtbarne

  Specs: 1920x1080 i7 1.6 GHz quad core 6GB RAM 1GB ATI Radeon HD 6570M/5700 Series 500GB 7200rpm Hard Drive Love this laptop for many reasons, but it constantly runs hot (CPU is low 70s with basic tasks and often 80+ is not uncommon) and I'm finding it too much to deal with. The laptop feels very hot (almost too hot for a lap) and often gets so hot that the OS slows down or freezes altogether. I've tried cleaning it out and even replacing the thermal paste. I often use an external cooler, but it only helps 3-5 degrees and it's a pain to have to use. I've come to the conclusion that it just runs hot. I have two questions: What is to blame? The i7 processor, the gfx card, or is it just that this laptop has poor cooling? Does the Dell XPS 15 run cooler? I'm looking at replacing my current laptop, but I don't want to run into the same problem.

  Read the article

• SQL 2008 Memory Usage

  - by Danilo Brambilla

  I have a SQL Server 2008 (ver 10.0.1600) running on a Windows Server 2008 R2 Enterprise server with 8 GB of physical ram. If I open Task Manager I can see on 'Physical Memory' section of 'Performance' tab that only 340 MB are Available of 8191 Total, but I can't see any process using such amount of memory. Please note SQL Server is memory limited to 6GB (Maximum Server Memory = 6000). If I open Sysinternals Process Explorer, I can see sqlsrvr.exe process has: Private Bytes: 227.000 K Working Set: 140.000 K Virtual Size: 8.762.000 K What does this means? Is there any way to free up this memory for other process? Why Virtual Size figure as allocated memory? I thought that Virtual Size was 'reserved memory' only.

  Read the article

• Performance problems on RDC to our Terminal-Server Win2008 R2

  - by user40021

  Hello, we have a new win2008-R2 (2x Xeon X5570, 32GB RAM). There I have installed the terminal-server roles, thats all OK. Currently 5 users are working at this server, but all get a very low performance in their remote-desktop session. Sometime it takes 1-2 seconds till the keyboard-inputs will be performed and shown. At the clients I run RDP v 6.1 We have also an older TS-server (based on Win2003 with an Opteron-CPU), there are working about 20 users at the same time. There I do not have the troubles with the inputs at the remote-desktop sessions. Both servers are connected to the same gigabit-switch. Any ideas what could cause the troubles at the Win2008 R2? Many thanks in advance. Regards Chris

  Read the article

• System freezes for 5 seconds when seeking in or skipping to songs and videos

  - by pragmatick

  When I start playing a new video or MP3 or skip to a time when playing them, my system hangs for a couple of seconds. A restart solves this problem, but only for a while. It does not matter which player I use (VLC, Media Player, Winamp, Zoom Player), which media files or if they are located on a network drive or on the local hard drive. Everything else works flawlessly and after the playing has started, there are not problems - until I switch to another file. Additionally, when the Winamp playlist continues to the next song, the system does not hang. When I skip to the next song manually, the system hangs. I've been using Windows XP for years and consider myself a fairly professional windows user, but I have no idea what could cause this. Dual-core 2Ghz, 2GB RAM, Windows XP SP3, Audigy card with kxproject. Worked flawlessly for years. Would be glad if anyone could help.

  Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >