Search Results

Search found 2863 results on 115 pages for 'sms gateway'.

Page 115/115 | < Previous Page | 111 112 113 114 115 

• Unexpected multiple network connections on Windows Vista

  - by Jens

  My Network and Sharing Center shows multiple connections to the internet, where only one is expected: My internet access works fine, but since the "Unidentified Network" is set to public after each boot, sharing and network discovery don't work as well. Similar questions on Google point mostly to the Bonjour service, but I am sure that this is not, and never was, installed on this machine. So: How can I get rid of the unidentified network? Output of ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : ***** Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mySuffix Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mySuffix Description . . . . . . . . . . . : Intel(R) 82567LF-3 Gigabit Network Connection Physical Address. . . . . . . . . : 00-19-99-65-F0-B2 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::c90:2d23:7651:42f%10(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.141.130(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 13 November 2012 09:40:54 Lease Expires . . . . . . . . . . : 21 November 2012 09:45:01 Default Gateway . . . . . . . . . : 192.168.141.109 192.168.141.108 DHCP Server . . . . . . . . . . . : 192.168.141.120 DHCPv6 IAID . . . . . . . . . . . : 218110361 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-DD-00-AF-00-19-99-65-F0-B2 DNS Servers . . . . . . . . . . . : 8.8.8.8 8.8.4.4 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 13: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : mySuffix Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes

  Read the article

• Boot log from remotely managed/hacked iPhone for analysis

  - by user1319903

  in reference to my other post. syslog captured immediately after a hard reset for analysis of foul play. Apr 8, 2012 10:08:36 PM - dataaccessd [53] (Notice): 137860|CoreDAV|Warn |Account "iCloud" couldn't reach the server at p03-contacts.icloud.com: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0xde63920 {NSErrorFailingURLStringKey=https://%[email protected]/159665024/principal/, NSErrorFailingURLKey=https://%[email protected]/ /principal/, NSLocalizedDescription=The Internet connection appears to be offline., NSUnderlyingError=0xde7dc00 "The Internet connection appears to be offline."} Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): TRACE: connection interrupted Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): DEBUG: disconnected Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): TRACE: Canceling Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): TRACE: connection invalid Apr 8, 2012 10:08:35 PM - kernel [0] (Debug): launchd[82] Builtin profile: container (sandbox) Apr 8, 2012 10:08:35 PM - kernel [0] (Debug): launchd[82] Container: /private/var/mobile/Applications/048D35CA-6427-4EC8-8B76-A194697A7CE9 [69] (sandbox) Apr 8, 2012 10:08:35 PM - wifid [29] (Error): WiFi:[355640915.904103]: Client dataaccessd set type to background application Apr 8, 2012 10:08:35 PM - dataaccessd [53] (Notice): 137860|DA|Warn |Delegate 5ADDBE3B-D5FD-43E1-87D4-C1153733EFAB finished a refresh but it is not registered with the refresh manager Apr 8, 2012 10:08:34 PM - timed [31] (Notice): (Note ) CoreTime: Not setting system time to 04/09/2012 05:08:34 from GPS because time is unchanged Apr 8, 2012 10:08:34 PM - timed [31] (Notice): (Note ) CoreTime: Not setting time zone to America/Los_Angeles from NITZ Apr 8, 2012 10:08:33 PM - kernel [0] (Debug): AppleKeyStore:cp_key_store_action(1) Apr 8, 2012 10:08:33 PM - kernel [0] (Debug): AppleKeyStore:Sending lock change Apr 8, 2012 10:08:32 PM - profiled [20] (Notice): (Note ) profiled: Device unlock notification received Apr 8, 2012 10:08:31 PM - softwareupdated [37] (Notice): 3e828d98 : Cleaning up unused prepared updates Apr 8, 2012 10:08:27 PM - mstreamd [43] (Warning): PSDLog: Can't return photoStreamsPublishStreamID because no Apple Account has Photo Streams enabled Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Not listening to push notifications. Apr 8, 2012 10:08:27 PM - mstreamd [43] (Warning): PSDLog: Can't return photoStreamsPublishStreamID because no Apple Account has Photo Streams enabled Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Not listening to push notifications. Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Retrieved push tokens. Dev: 0, Prod: 0 Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Media stream daemon starting... Apr 8, 2012 10:08:26 PM - SpringBoard [15] (Notice): SMSCTServer is available and ready to rock. Apr 8, 2012 10:08:26 PM - SpringBoard [15] (Error): mms: * isMmsConfigured = 1 Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): BT: failed to get connectable state with error 111 Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: Consulting "no-sdio-devices" property. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: "no-sdio-devices" property not found. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): SMS Plugin initialized. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): Telephony plugin initialized Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): SIMToolkit plugin for SpringBoard initialized. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: Consulting "no-sdio-devices" property. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: "no-sdio-devices" property not found. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): WiFi picker plugin initialized Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): EKAlarmEngine: Region monitoring not available or enabled. Trigger ignored! Apr 8, 2012 10:08:24 PM - kernel [0] (Debug): AppleH4CamIn::setPowerStateGated: 0 Apr 8, 2012 10:08:24 PM - kernel [0] (Debug): AppleH4CamIn::power_off_hardware Apr 8, 2012 10:08:24 PM - SpringBoard [15] (Notice): IOMobileFrameBufferGetMirroringCapability returning -536870201 via kIOMFBConnectMethod_GetMirroringCapability  Apr 8, 2012 10:08:24 PM - aggregated [61] (Warning): PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing Apr 8, 2012 10:08:24 PM - aggregated [61] (Warning): PLAggregateState Error: Entering state unplugged_screen_on even though we are already in it, doing nothing Apr 8, 2012 10:08:24 PM - wifid [29] (Error): WiFi:[355640904.616440]: Disable WoW requested by "spd" Apr 8, 2012 10:08:24 PM - SpringBoard [15] (Warning): Application windows are expected to have a root view controller at the end of application launch Apr 8, 2012 10:08:23 PM - SpringBoard [15] (Warning): BTM: attaching to BTServer Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadFirmware_gated: fw len=1232920 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadFirmware_gated - firmware checksum: 0x05935019 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::power_on_hardware Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_Init - No set-file loaded for camera channel 0 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_Init - No set-file loaded for camera channel 1 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_InitialSensorDetection - found sensor on chan 0: 0x0145 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_InitialSensorDetection - found sensor on chan 1: 0x7736 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::power_off_hardware Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadSetfile_gated (camChan=0) Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadSetfile_gated (camChan=1) Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::setPowerStateGated: 1 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::power_on_hardware Apr 8, 2012 10:08:23 PM - profiled [20] (Notice): (Note ) profiled: Locking device Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): HighlandParkResourceMgr::AddFirmware() {'cdma', '    '} added to resources Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function PTP Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction all functions registered- we are ready to start usb stack Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): HighlandParkResourceMgr::AddFirmware() {'gsm ', 'nb  '} added to resources Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): HighlandParkResourceMgr::AddFirmware() {'gsm ', 'wb  '} added to resources Apr 8, 2012 10:08:22 PM - MRMLowDiskUEA [12] (Notice): MobileDelete: LowDisk Plugin: start Apr 8, 2012 10:08:22 PM - MRMLowDiskUEA [12] (Notice): kqueue registration successful Apr 8, 2012 10:08:22 PM - mediaserverd [44] (Error): 22:08:22.522867 com.apple.AVConference: /SourceCache/GameKitServices/GameKitServices-344.21/AVConference.subproj/Sources/AVConferenceServer.m:1867: AVConferenceServerStart Apr 8, 2012 10:08:22 PM - CommCenter [18] (Notice): Carrier bundle value for recipient address: 28818773 Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: iPod USB Interface Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: USBAudioControl Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: USBAudioStreaming Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: IapOverUsbHid Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: AppleUSBMux Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: AppleUSBMux Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: AppleUSBEthernet Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): IOAccessoryPortUSB::start Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): virtual bool AppleUSBDeviceMux::start(IOService*) build: Feb  1 2012 23:16:46 Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): init_waste Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleUSBEthernetDevice::start: Host MAC address = 02:(this Mac address does not physically exist) -edit Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleUSBEthernetDevice: Ethernet address  Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): BTServer[66] Builtin profile: BlueTool (sandbox) Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): BTServer[66] Builtin profile: BlueTool (sandbox) Apr 8, 2012 10:08:21 PM - hpfd [50] (Notice): firmware resource loaded { 'cdma' '    ' } Apr 8, 2012 10:08:21 PM - wifid [29] (Error): WiFi:[355640901.282776]: Could not read APPLE80211_IOC_SUPPORTED_CHANNELS err=82 Apr 8, 2012 10:08:21 PM - wifid [29] (Error): WiFi:[355640901.312786]: Client itunesstored is background application Apr 8, 2012 10:08:21 PM - timed [31] (Notice): (Note ) CoreTime: Want active time in 38.24hrs. Need active time in 121.57hrs. Apr 8, 2012 10:08:21 PM - SpringBoard [15] (Notice): MultitouchHID: detection mode: 255-0 (deferring until bootloaded) Apr 8, 2012 10:08:21 PM - CLTM [12] (Error): CLTM: resetting temps: now = 1333948101, last update = -2147483648 Apr 8, 2012 10:08:21 PM - locationd [28] (Error): WiFi:[355640901.852993]: WiFiManager now available Apr 8, 2012 10:08:21 PM - OTACrashCopier [62] (Notice): (Warn ) Failed to read attributes from '/var/mobile/Library/OTALogging/.last_successful_submission_marker' Apr 8, 2012 10:08:21 PM - hpfd [50] (Notice): firmware resource loaded { 'gsm ' 'nb  ' } Apr 8, 2012 10:08:21 PM - hpfd [50] (Notice): firmware resource loaded { 'gsm ' 'wb  ' } Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): successful initialization Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore:initFirmware(): 2496 PropTxStatus feature is not enabled for this platform  Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore::initDongle():: creating virtual interface with prefix = ap Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore::initDongle(): Core Driver Initialization Time 19.38798583 Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): 000019.281423 hsic-baseband::safetyNet: port is not connected Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 _create_cesm_vault: try to create blob Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 load_activation_records: This is the default record Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 _create_cesm_vault: blob written Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 ping_configd: Not setting host name, it already has one: Pete's iPod  Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 lookup_baseband_info_new: radio not ready: kCTPostponementStatusNotReady Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 load_activation_records: This is the default record Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Error): WiFi: Consulting "no-sdio-devices" property. Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Error): WiFi: "no-sdio-devices" property not found. Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Original act. state: Activated Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: radio not ready, don't change activation status, wait for notification, status: kCTPostponementStatusNotReady Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Activation state now is Activated Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Warning): lockdown says the device is: [Activated], state is 3 Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Warning): lockdown says we've previously registered: [1], state is 1 Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 notification_worker: now listening for CT notifications Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 notification_worker: we've registered for notifications, now make sure we didn't miss one... Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 load_activation_records: This is the default record Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Original act. state: Activated Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: radio not ready, don't change activation status, wait for notification, status: kCTPostponementStatusNotReady Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Activation state now is Activated Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Notice): Posting 'com.apple.iokit.hid.displayStatus' notifyState=1 Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Notice): __IOHIDLoadBundles: Loaded 1 HID plugin Apr 8, 2012 10:08:19 PM - wifiFirmwareLoader [30] (Warning): [    18.778 sec] Downloaded firmware, 192512 bytes Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleKeyStore:cp_key_store_action(0) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleMultitouchN1SPI: downloaded 128 bytes of prox calibration data ("built-in") Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleMultitouchN1SPI: downloaded 1024 bytes of calibration data ("built-in") Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::attachBusGated(): Bus Driver Initialization Time 18.266927958 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore:attachBusGated(): Starting with MAC Address: 00:f4:b9:2f:d9:8d Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANFirmwareManager::setNVRAMData(): received 778 bytes Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore: Ethernet address 00:f4:b9:2f:d9:8d Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): Loading syscfg. Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleMultitouchN1SPI: downloaded 56264 bytes of firmware data ("0x0084.bin") in 152ms. Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AirPort: Enabled AppleBCMWLANCore (link 0, sys 0, user 0) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANBusInterfaceHSIC::loadFirmware(): DL Ver: chip 0x4330, chiprev 0x4 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): BTServer[66] Builtin profile: BlueTool (sandbox) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): BCMWLAN Firmware Version: wl0: Dec 22 2011 19:03:58 version 5.95.45 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): Firmware supports ap mode; enabling apsta feature (currently enabled) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): country code set to XX Apr 8, 2012 10:08:19 PM - configd [14] (Notice): network configuration changed. Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCmdManager::processResponse(): Firmware Error "BCOM Unsupported" on command "WLC_SET_VAR: bus:txglom" (263). Transaction ID 3, length 0 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): Glomming not supported on this device: BCOM Unsupported Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware: apsta set to 1 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::handleEventPacket(): WLC_E_FIFO_CREDIT_MAP,length 6 [9 2 5 3 2] Apr 8, 2012 10:08:19 PM - iapd [49] (Error): Timed out trying to acquire capabilities data. Apr 8, 2012 10:08:19 PM - softwareupdated [37] (Notice): 3e828d98 : Cleaning up unused prepared updates Apr 8, 2012 10:08:19 PM - com.apple.misd [63] (Notice): allowing special port forwarding for test fixtures Apr 8, 2012 10:08:19 PM - hpfd [50] (Notice): resource request { 'N94 ', '    ' } Apr 8, 2012 10:08:19 PM - mstreamd [43] (Notice): (Note ) mstreamd: mstreamd starting up. Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[44] Builtin profile: mediaserverd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[49] Builtin profile: iapd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[53] Builtin profile: dataaccessd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[60] Builtin profile: apsd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[66] Builtin profile: BTServer (sandbox) Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): mDNSResponder mDNSResponder-329.10 (Jan 15 2012 19:07:41) starting iOSVers 9 Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): Note: SetDomainSecrets: no keychain support Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): Note: Compiled without SnowLeopard Fine-Grained Power Management support Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): event logs in /private/var/.fseventsd out of sync with volume.  destroying old logs. (10083 7 10090) Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): log dir: /private/var/.fseventsd getting new uuid: 8778E61A-0283-4067-B7DF-F75D109983D1 Apr 8, 2012 10:08:18 PM - fseventsd [51] (Error): failed to make the directory /.fseventsd (30/Read-only file system) Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): could not open < (No such file or directory) Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): log dir: /tmp getting new uuid: 3919EB54-A54F-4289-864A-5158A25EF9DA Apr 8, 2012 10:08:18 PM - wifid [29] (Error): WiFi:[355640898.328610]: WiFi Preferences is up to date Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): D2DInitialize succeeded Apr 8, 2012 10:08:18 PM - fairplayd.N94 [52] (Notice): Vroum Apr 8, 2012 10:08:18 PM - wifid [29] (Error): WiFi:[355640898.537219]: WiFiManager starting, version: WiFiManager-260.9 Feb  4 2012 13:25:16 Apr 8, 2012 10:08:18 PM - configd [14] (Error): WiFi:[355640898.539342]: WiFiManager now available Apr 8, 2012 10:08:18 PM - keybagd [39] (Error): 3e828d98 main: System Keybag loaded Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): [    18.268 sec] Found AppleBCMWLANBusInterface; downloading FW.. Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): Loading "/usr/share/firmware/wifi/4330b2/bcm94330OlympicUNO3.txt", file size = 778 bytes Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): [    18.276 sec] Sending NVRAM, 778 bytes Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): Loading "/usr/share/firmware/wifi/4330b2/n94.trx", file size = 192512 bytes Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): [    18.300 sec] Sending firmware, 192512 bytes Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt copyEthernetMacAddress: got 00:f4:b9:2f:d9:8f from syscfg Apr 8, 2012 10:08:18 PM - mediaserverd [44] (Notice): 2012-04-08 10:08:18.817015 PM [AirTunes] HAL plugin started Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt createCFStringWithCFData: Cannot convert NULL data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt copyBasebandBoardSnum: Could not convert baseband board snum data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt createCFStringWithCFData: Cannot convert NULL data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt copyWirelessBoardSnum: Could not convert wireless board snum data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Notice): 3e828d98 lockstart_local: Build= 9B179 Apr 8, 2012 10:08:18 PM - lockdownd [23] (Notice): 3e828d98 _load_product_type: using Raptor Certs Apr 8, 2012 10:08:17 PM - wifiFirmwareLoader [30] (Warning): [    17.590 sec] wlan AppleUSBHSICDevice found Apr 8, 2012 10:08:17 PM - wifiFirmwareLoader [30] (Warning): [    17.590 sec] WLAN Enumeration attempt 0 / 6: Apr 8, 2012 10:08:17 PM - wifiFirmwareLoader [30] (Warning): [    17.591 sec] Waiting for AppleBCMWLANBusInterface to enumerate... Apr 8, 2012 10:08:16 PM - CommCenter [18] (Notice): MMS thread running Apr 8, 2012 10:08:16 PM - CommCenter [18] (Notice): Communications Center Started. Apr 8, 2012 10:08:16 PM - CommCenter [18] (Notice): STOP LOCATION UPDATE Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.704327]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.705542]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.706648]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.707418]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:15 PM - kernel [0] (Debug): bool AppleRGBOUT::power_down_hardware(), RGB_CTRL (0x00000000) clk_down_ready is not set after 60 msecs Apr 8, 2012 10:08:14 PM - lockdownd [23] (Notice): 3e828d98 main: Starting Up Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): IOReturn AppleRGBOUT::set_display_device_gated(uint32_t), 1 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 1 fHard: 1 swapBusy: 1  fController: 0 - 1 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): bool AppleRGBOUT::power_up_hardware() Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): set_crc_notification_state 0 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 1 - 0 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): bool AppleRGBOUT::power_down_hardware() Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): IOReturn IOMobileFramebufferUserClient::set_hotplug_notify(void *, void *) 0x314b3f0d 0xe215600 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): IOReturn IOMobileFramebufferUserClient::set_hotplug_notify(void *, void *) 0x849d5000 0x876e8828 0x314b3f0d 0xe215600 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): bool AppleRGBOUT::power_down_hardware(), clock down RGBOUT Apr 8, 2012 10:08:14 PM - SpringBoard [15] (Notice): IOMobileFrameBufferGetMirroringCapability returning -536870201 via kIOMFBConnectMethod_GetMirroringCapability  Apr 8, 2012 10:08:14 PM - backupd [21] (Warning): INFO: Account changed (enabled=0, accountID=159665024) Apr 8, 2012 10:08:13 PM - kernel [0] (Debug): launchd[17] Builtin profile: ptpd (sandbox) Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Warning): Factory called Apr 8, 2012 10:08:13 PM - configd [14] (Error): WiFi:[355640893.157493]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:13 PM - configd [14] (Error): WiFi:[355640893.158197]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:13 PM - configd [14] (Error): WiFi:[355640893.158878]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Notice): (Note ) PIH: MCUEAPlugin initialized. Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Error): Querying interface Apr 8, 2012 10:08:13 PM - configd [14] (Error): ioctl(SIOCGIFCAP) failed: Device not configured Apr 8, 2012 10:08:13 PM - configd [14] (Error): ioctl(SIOCGIFCAP) failed: Device not configured Apr 8, 2012 10:08:13 PM - configd [14] (Notice): setting hostname to "Petes-iPod" Apr 8, 2012 10:08:13 PM - configd [14] (Notice): network configuration changed. Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Warning): TRACE: sending {    command = kMBMessageAccountChanged; } Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Service starting... Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Performing boot time checks. Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) MC: Checking for MDM installation... Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) MC: ...finished checking for MDM installation. Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Checking for new carrier profile... Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Installing new carrier profile. Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Carrier profile has already been installed. Apr 8, 2012 10:08:12 PM - com.apple.launchd [1] (Warning): (com.apple.ptpd) The exception server is already claimed! Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: mitigation behavior enabled Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: camera equations enabled Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: thermal monitoring enabled Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: registered for wake notification Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 0 to 16384 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 1 to 546 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 2 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 3 to 6553 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 4 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 5 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 6 to 16384 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 9 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 10 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: Set AppleARMPerformanceControllerDVDFactor1 dithering level to 101% Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: Set AppleARMPerformanceControllerDVDFactor0 dithering level to 100% Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: Set charge rate index to 0 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: HID not ready cannot set BL Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: setting thermal status level to 0 (0) [-32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768] Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set allowable transmit power limit to 24.000 dBm [-32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768] Apr 8, 2012 10:08:12 PM - CLTM [12] (Error): CLTM: Could not close relay file Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: thermtgraphrelay is not present

  Read the article

• What's New in ASP.NET 4

  - by Navaneeth

  The .NET Framework version 4 includes enhancements for ASP.NET 4 in targeted areas. Visual Studio 2010 and Microsoft Visual Web Developer Express also include enhancements and new features for improved Web development. This document provides an overview of many of the new features that are included in the upcoming release. This topic contains the following sections: ASP.NET Core Services ASP.NET Web Forms ASP.NET MVC Dynamic Data ASP.NET Chart Control Visual Web Developer Enhancements Web Application Deployment with Visual Studio 2010 Enhancements to ASP.NET Multi-Targeting ASP.NET Core Services ASP.NET 4 introduces many features that improve core ASP.NET services such as output caching and session state storage. Extensible Output Caching Since the time that ASP.NET 1.0 was released, output caching has enabled developers to store the generated output of pages, controls, and HTTP responses in memory. On subsequent Web requests, ASP.NET can serve content more quickly by retrieving the generated output from memory instead of regenerating the output from scratch. However, this approach has a limitation — generated content always has to be stored in memory. On servers that experience heavy traffic, the memory requirements for output caching can compete with memory requirements for other parts of a Web application. ASP.NET 4 adds extensibility to output caching that enables you to configure one or more custom output-cache providers. Output-cache providers can use any storage mechanism to persist HTML content. These storage options can include local or remote disks, cloud storage, and distributed cache engines. Output-cache provider extensibility in ASP.NET 4 lets you design more aggressive and more intelligent output-caching strategies for Web sites. For example, you can create an output-cache provider that caches the "Top 10" pages of a site in memory, while caching pages that get lower traffic on disk. Alternatively, you can cache every vary-by combination for a rendered page, but use a distributed cache so that the memory consumption is offloaded from front-end Web servers. You create a custom output-cache provider as a class that derives from the OutputCacheProvider type. You can then configure the provider in the Web.config file by using the new providers subsection of the outputCache element For more information and for examples that show how to configure the output cache, see outputCache Element for caching (ASP.NET Settings Schema). For more information about the classes that support caching, see the documentation for the OutputCache and OutputCacheProvider classes. By default, in ASP.NET 4, all HTTP responses, rendered pages, and controls use the in-memory output cache. The defaultProvider attribute for ASP.NET is AspNetInternalProvider. You can change the default output-cache provider used for a Web application by specifying a different provider name for defaultProvider attribute. In addition, you can select different output-cache providers for individual control and for individual requests and programmatically specify which provider to use. For more information, see the HttpApplication.GetOutputCacheProviderName(HttpContext) method. The easiest way to choose a different output-cache provider for different Web user controls is to do so declaratively by using the new providerName attribute in a page or control directive, as shown in the following example: <%@ OutputCache Duration="60" VaryByParam="None" providerName="DiskCache" %> Preloading Web Applications Some Web applications must load large amounts of data or must perform expensive initialization processing before serving the first request. In earlier versions of ASP.NET, for these situations you had to devise custom approaches to "wake up" an ASP.NET application and then run initialization code during the Application_Load method in the Global.asax file. To address this scenario, a new application preload manager (autostart feature) is available when ASP.NET 4 runs on IIS 7.5 on Windows Server 2008 R2. The preload feature provides a controlled approach for starting up an application pool, initializing an ASP.NET application, and then accepting HTTP requests. It lets you perform expensive application initialization prior to processing the first HTTP request. For example, you can use the application preload manager to initialize an application and then signal a load-balancer that the application was initialized and ready to accept HTTP traffic. To use the application preload manager, an IIS administrator sets an application pool in IIS 7.5 to be automatically started by using the following configuration in the applicationHost.config file: <applicationPools> <add name="MyApplicationPool" startMode="AlwaysRunning" /> </applicationPools> Because a single application pool can contain multiple applications, you specify individual applications to be automatically started by using the following configuration in the applicationHost.config file: <sites> <site name="MySite" id="1"> <application path="/" serviceAutoStartEnabled="true" serviceAutoStartProvider="PrewarmMyCache" > <!-- Additional content --> </application> </site> </sites> <!-- Additional content --> <serviceAutoStartProviders> <add name="PrewarmMyCache" type="MyNamespace.CustomInitialization, MyLibrary" /> </serviceAutoStartProviders> When an IIS 7.5 server is cold-started or when an individual application pool is recycled, IIS 7.5 uses the information in the applicationHost.config file to determine which Web applications have to be automatically started. For each application that is marked for preload, IIS7.5 sends a request to ASP.NET 4 to start the application in a state during which the application temporarily does not accept HTTP requests. When it is in this state, ASP.NET instantiates the type defined by the serviceAutoStartProvider attribute (as shown in the previous example) and calls into its public entry point. You create a managed preload type that has the required entry point by implementing the IProcessHostPreloadClient interface, as shown in the following example: public class CustomInitialization : System.Web.Hosting.IProcessHostPreloadClient { public void Preload(string[] parameters) { // Perform initialization. } } After your initialization code runs in the Preload method and after the method returns, the ASP.NET application is ready to process requests. Permanently Redirecting a Page Content in Web applications is often moved over the lifetime of the application. This can lead to links to be out of date, such as the links that are returned by search engines. In ASP.NET, developers have traditionally handled requests to old URLs by using the Redirect method to forward a request to the new URL. However, the Redirect method issues an HTTP 302 (Found) response (which is used for a temporary redirect). This results in an extra HTTP round trip. ASP.NET 4 adds a RedirectPermanent helper method that makes it easy to issue HTTP 301 (Moved Permanently) responses, as in the following example: RedirectPermanent("/newpath/foroldcontent.aspx"); Search engines and other user agents that recognize permanent redirects will store the new URL that is associated with the content, which eliminates the unnecessary round trip made by the browser for temporary redirects. Session State Compression By default, ASP.NET provides two options for storing session state across a Web farm. The first option is a session state provider that invokes an out-of-process session state server. The second option is a session state provider that stores data in a Microsoft SQL Server database. Because both options store state information outside a Web application's worker process, session state has to be serialized before it is sent to remote storage. If a large amount of data is saved in session state, the size of the serialized data can become very large. ASP.NET 4 introduces a new compression option for both kinds of out-of-process session state providers. By using this option, applications that have spare CPU cycles on Web servers can achieve substantial reductions in the size of serialized session state data. You can set this option using the new compressionEnabled attribute of the sessionState element in the configuration file. When the compressionEnabled configuration option is set to true, ASP.NET compresses (and decompresses) serialized session state by using the .NET Framework GZipStreamclass. The following example shows how to set this attribute. <sessionState mode="SqlServer" sqlConnectionString="data source=dbserver;Initial Catalog=aspnetstate" allowCustomSqlDatabase="true" compressionEnabled="true" /> ASP.NET Web Forms Web Forms has been a core feature in ASP.NET since the release of ASP.NET 1.0. Many enhancements have been in this area for ASP.NET 4, such as the following: The ability to set meta tags. More control over view state. Support for recently introduced browsers and devices. Easier ways to work with browser capabilities. Support for using ASP.NET routing with Web Forms. More control over generated IDs. The ability to persist selected rows in data controls. More control over rendered HTML in the FormView and ListView controls. Filtering support for data source controls. Enhanced support for Web standards and accessibility Setting Meta Tags with the Page.MetaKeywords and Page.MetaDescription Properties Two properties have been added to the Page class: MetaKeywords and MetaDescription. These two properties represent corresponding meta tags in the HTML rendered for a page, as shown in the following example: <head id="Head1" runat="server"> <title>Untitled Page</title> <meta name="keywords" content="keyword1, keyword2' /> <meta name="description" content="Description of my page" /> </head> These two properties work like the Title property does, and they can be set in the @ Page directive. For more information, see Page.MetaKeywords and Page.MetaDescription. Enabling View State for Individual Controls A new property has been added to the Control class: ViewStateMode. You can use this property to disable view state for all controls on a page except those for which you explicitly enable view state. View state data is included in a page's HTML and increases the amount of time it takes to send a page to the client and post it back. Storing more view state than is necessary can cause significant decrease in performance. In earlier versions of ASP.NET, you could reduce the impact of view state on a page's performance by disabling view state for specific controls. But sometimes it is easier to enable view state for a few controls that need it instead of disabling it for many that do not need it. For more information, see Control.ViewStateMode. Support for Recently Introduced Browsers and Devices ASP.NET includes a feature that is named browser capabilities that lets you determine the capabilities of the browser that a user is using. Browser capabilities are represented by the HttpBrowserCapabilities object which is stored in the HttpRequest.Browser property. Information about a particular browser's capabilities is defined by a browser definition file. In ASP.NET 4, these browser definition files have been updated to contain information about recently introduced browsers and devices such as Google Chrome, Research in Motion BlackBerry smart phones, and Apple iPhone. Existing browser definition files have also been updated. For more information, see How to: Upgrade an ASP.NET Web Application to ASP.NET 4 and ASP.NET Web Server Controls and Browser Capabilities. The browser definition files that are included with ASP.NET 4 are shown in the following list: •blackberry.browser •chrome.browser •Default.browser •firefox.browser •gateway.browser •generic.browser •ie.browser •iemobile.browser •iphone.browser •opera.browser •safari.browser A New Way to Define Browser Capabilities ASP.NET 4 includes a new feature referred to as browser capabilities providers. As the name suggests, this lets you build a provider that in turn lets you write custom code to determine browser capabilities. In ASP.NET version 3.5 Service Pack 1, you define browser capabilities in an XML file. This file resides in a machine-level folder or an application-level folder. Most developers do not need to customize these files, but for those who do, the provider approach can be easier than dealing with complex XML syntax. The provider approach makes it possible to simplify the process by implementing a common browser definition syntax, or a database that contains up-to-date browser definitions, or even a Web service for such a database. For more information about the new browser capabilities provider, see the What's New for ASP.NET 4 White Paper. Routing in ASP.NET 4 ASP.NET 4 adds built-in support for routing with Web Forms. Routing is a feature that was introduced with ASP.NET 3.5 SP1 and lets you configure an application to use URLs that are meaningful to users and to search engines because they do not have to specify physical file names. This can make your site more user-friendly and your site content more discoverable by search engines. For example, the URL for a page that displays product categories in your application might look like the following example: http://website/products.aspx?categoryid=12 By using routing, you can use the following URL to render the same information: http://website/products/software The second URL lets the user know what to expect and can result in significantly improved rankings in search engine results. the new features include the following: The PageRouteHandler class is a simple HTTP handler that you use when you define routes. You no longer have to write a custom route handler. The HttpRequest.RequestContext and Page.RouteData properties make it easier to access information that is passed in URL parameters. The RouteUrl expression provides a simple way to create a routed URL in markup. The RouteValue expression provides a simple way to extract URL parameter values in markup. The RouteParameter class makes it easier to pass URL parameter values to a query for a data source control (similar to FormParameter). You no longer have to change the Web.config file to enable routing. For more information about routing, see the following topics: ASP.NET Routing Walkthrough: Using ASP.NET Routing in a Web Forms Application How to: Define Routes for Web Forms Applications How to: Construct URLs from Routes How to: Access URL Parameters in a Routed Page Setting Client IDs The new ClientIDMode property makes it easier to write client script that references HTML elements rendered for server controls. Increasing use of Microsoft Ajax makes the need to do this more common. For example, you may have a data control that renders a long list of products with prices and you want to use client script to make a Web service call and update individual prices in the list as they change without refreshing the entire page. Typically you get a reference to an HTML element in client script by using the document.GetElementById method. You pass to this method the value of the id attribute of the HTML element you want to reference. In the case of elements that are rendered for ASP.NET server controls earlier versions of ASP.NET could make this difficult or impossible. You were not always able to predict what id values ASP.NET would generate, or ASP.NET could generate very long id values. The problem was especially difficult for data controls that would generate multiple rows for a single instance of the control in your markup. ASP.NET 4 adds two new algorithms for generating id attributes. These algorithms can generate id attributes that are easier to work with in client script because they are more predictable and that are easier to work with because they are simpler. For more information about how to use the new algorithms, see the following topics: ASP.NET Web Server Control Identification Walkthrough: Making Data-Bound Controls Easier to Access from JavaScript Walkthrough: Making Controls Located in Web User Controls Easier to Access from JavaScript How to: Access Controls from JavaScript by ID Persisting Row Selection in Data Controls The GridView and ListView controls enable users to select a row. In previous versions of ASP.NET, row selection was based on the row index on the page. For example, if you select the third item on page 1 and then move to page 2, the third item on page 2 is selected. In most cases, is more desirable not to select any rows on page 2. ASP.NET 4 supports Persisted Selection, a new feature that was initially supported only in Dynamic Data projects in the .NET Framework 3.5 SP1. When this feature is enabled, the selected item is based on the row data key. This means that if you select the third row on page 1 and move to page 2, nothing is selected on page 2. When you move back to page 1, the third row is still selected. This is a much more natural behavior than the behavior in earlier versions of ASP.NET. Persisted selection is now supported for the GridView and ListView controls in all projects. You can enable this feature in the GridView control, for example, by setting the EnablePersistedSelection property, as shown in the following example: <asp:GridView id="GridView2" runat="server" PersistedSelection="true"> </asp:GridView> FormView Control Enhancements The FormView control is enhanced to make it easier to style the content of the control with CSS. In previous versions of ASP.NET, the FormView control rendered it contents using an item template. This made styling more difficult in the markup because unexpected table row and table cell tags were rendered by the control. The FormView control supports RenderOuterTable, a property in ASP.NET 4. When this property is set to false, as show in the following example, the table tags are not rendered. This makes it easier to apply CSS style to the contents of the control. <asp:FormView ID="FormView1" runat="server" RenderTable="false"> For more information, see FormView Web Server Control Overview. ListView Control Enhancements The ListView control, which was introduced in ASP.NET 3.5, has all the functionality of the GridView control while giving you complete control over the output. This control has been made easier to use in ASP.NET 4. The earlier version of the control required that you specify a layout template that contained a server control with a known ID. The following markup shows a typical example of how to use the ListView control in ASP.NET 3.5. <asp:ListView ID="ListView1" runat="server"> <LayoutTemplate> <asp:PlaceHolder ID="ItemPlaceHolder" runat="server"></asp:PlaceHolder> </LayoutTemplate> <ItemTemplate> <% Eval("LastName")%> </ItemTemplate> </asp:ListView> In ASP.NET 4, the ListView control does not require a layout template. The markup shown in the previous example can be replaced with the following markup: <asp:ListView ID="ListView1" runat="server"> <ItemTemplate> <% Eval("LastName")%> </ItemTemplate> </asp:ListView> For more information, see ListView Web Server Control Overview. Filtering Data with the QueryExtender Control A very common task for developers who create data-driven Web pages is to filter data. This traditionally has been performed by building Where clauses in data source controls. This approach can be complicated, and in some cases the Where syntax does not let you take advantage of the full functionality of the underlying database. To make filtering easier, a new QueryExtender control has been added in ASP.NET 4. This control can be added to EntityDataSource or LinqDataSource controls in order to filter the data returned by these controls. Because the QueryExtender control relies on LINQ, but you do not to need to know how to write LINQ queries to use the query extender. The QueryExtender control supports a variety of filter options. The following lists QueryExtender filter options. Term Definition SearchExpression Searches a field or fields for string values and compares them to a specified string value. RangeExpression Searches a field or fields for values in a range specified by a pair of values. PropertyExpression Compares a specified value to a property value in a field. If the expression evaluates to true, the data that is being examined is returned. OrderByExpression Sorts data by a specified column and sort direction. CustomExpression Calls a function that defines custom filter in the page. For more information, see QueryExtenderQueryExtender Web Server Control Overview. Enhanced Support for Web Standards and Accessibility Earlier versions of ASP.NET controls sometimes render markup that does not conform to HTML, XHTML, or accessibility standards. ASP.NET 4 eliminates most of these exceptions. For details about how the HTML that is rendered by each control meets accessibility standards, see ASP.NET Controls and Accessibility. CSS for Controls that Can be Disabled In ASP.NET 3.5, when a control is disabled (see WebControl.Enabled), a disabled attribute is added to the rendered HTML element. For example, the following markup creates a Label control that is disabled: <asp:Label id="Label1" runat="server"   Text="Test" Enabled="false" /> In ASP.NET 3.5, the previous control settings generate the following HTML: <span id="Label1" disabled="disabled">Test</span> In HTML 4.01, the disabled attribute is not considered valid on span elements. It is valid only on input elements because it specifies that they cannot be accessed. On display-only elements such as span elements, browsers typically support rendering for a disabled appearance, but a Web page that relies on this non-standard behavior is not robust according to accessibility standards. For display-only elements, you should use CSS to indicate a disabled visual appearance. Therefore, by default ASP.NET 4 generates the following HTML for the control settings shown previously: <span id="Label1" class="aspNetDisabled">Test</span> You can change the value of the class attribute that is rendered by default when a control is disabled by setting the DisabledCssClass property. CSS for Validation Controls In ASP.NET 3.5, validation controls render a default color of red as an inline style. For example, the following markup creates a RequiredFieldValidator control: <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"   ErrorMessage="Required Field" ControlToValidate="RadioButtonList1" /> ASP.NET 3.5 renders the following HTML for the validator control: <span id="RequiredFieldValidator1"   style="color:Red;visibility:hidden;">RequiredFieldValidator</span> By default, ASP.NET 4 does not render an inline style to set the color to red. An inline style is used only to hide or show the validator, as shown in the following example: <span id="RequiredFieldValidator1"   style"visibility:hidden;">RequiredFieldValidator</span> Therefore, ASP.NET 4 does not automatically show error messages in red. For information about how to use CSS to specify a visual style for a validation control, see Validating User Input in ASP.NET Web Pages. CSS for the Hidden Fields Div Element ASP.NET uses hidden fields to store state information such as view state and control state. These hidden fields are contained by a div element. In ASP.NET 3.5, this div element does not have a class attribute or an id attribute. Therefore, CSS rules that affect all div elements could unintentionally cause this div to be visible. To avoid this problem, ASP.NET 4 renders the div element for hidden fields with a CSS class that you can use to differentiate the hidden fields div from others. The new classvalue is shown in the following example: <div class="aspNetHidden"> CSS for the Table, Image, and ImageButton Controls By default, in ASP.NET 3.5, some controls set the border attribute of rendered HTML to zero (0). The following example shows HTML that is generated by the Table control in ASP.NET 3.5: <table id="Table2" border="0"> The Image control and the ImageButton control also do this. Because this is not necessary and provides visual formatting information that should be provided by using CSS, the attribute is not generated in ASP.NET 4. CSS for the UpdatePanel and UpdateProgress Controls In ASP.NET 3.5, the UpdatePanel and UpdateProgress controls do not support expando attributes. This makes it impossible to set a CSS class on the HTMLelements that they render. In ASP.NET 4 these controls have been changed to accept expando attributes, as shown in the following example: <asp:UpdatePanel runat="server" class="myStyle"> </asp:UpdatePanel> The following HTML is rendered for this markup: <div id="ctl00_MainContent_UpdatePanel1" class="expandoclass"> </div> Eliminating Unnecessary Outer Tables In ASP.NET 3.5, the HTML that is rendered for the following controls is wrapped in a table element whose purpose is to apply inline styles to the entire control: FormView Login PasswordRecovery ChangePassword If you use templates to customize the appearance of these controls, you can specify CSS styles in the markup that you provide in the templates. In that case, no extra outer table is required. In ASP.NET 4, you can prevent the table from being rendered by setting the new RenderOuterTable property to false. Layout Templates for Wizard Controls In ASP.NET 3.5, the Wizard and CreateUserWizard controls generate an HTML table element that is used for visual formatting. In ASP.NET 4 you can use a LayoutTemplate element to specify the layout. If you do this, the HTML table element is not generated. In the template, you create placeholder controls to indicate where items should be dynamically inserted into the control. (This is similar to how the template model for the ListView control works.) For more information, see the Wizard.LayoutTemplate property. New HTML Formatting Options for the CheckBoxList and RadioButtonList Controls ASP.NET 3.5 uses HTML table elements to format the output for the CheckBoxList and RadioButtonList controls. To provide an alternative that does not use tables for visual formatting, ASP.NET 4 adds two new options to the RepeatLayout enumeration: UnorderedList. This option causes the HTML output to be formatted by using ul and li elements instead of a table. OrderedList. This option causes the HTML output to be formatted by using ol and li elements instead of a table. For examples of HTML that is rendered for the new options, see the RepeatLayout enumeration. Header and Footer Elements for the Table Control In ASP.NET 3.5, the Table control can be configured to render thead and tfoot elements by setting the TableSection property of the TableHeaderRow class and the TableFooterRow class. In ASP.NET 4 these properties are set to the appropriate values by default. CSS and ARIA Support for the Menu Control In ASP.NET 3.5, the Menu control uses HTML table elements for visual formatting, and in some configurations it is not keyboard-accessible. ASP.NET 4 addresses these problems and improves accessibility in the following ways: The generated HTML is structured as an unordered list (ul and li elements). CSS is used for visual formatting. The menu behaves in accordance with ARIA standards for keyboard access. You can use arrow keys to navigate menu items. (For information about ARIA, see Accessibility in Visual Studio and ASP.NET.) ARIA role and property attributes are added to the generated HTML. (Attributes are added by using JavaScript instead of included in the HTML, to avoid generating HTML that would cause markup validation errors.) Styles for the Menu control are rendered in a style block at the top of the page, instead of inline with the rendered HTML elements. If you want to use a separate CSS file so that you can modify the menu styles, you can set the Menu control's new IncludeStyleBlock property to false, in which case the style block is not generated. Valid XHTML for the HtmlForm Control In ASP.NET 3.5, the HtmlForm control (which is created implicitly by the <form runat="server"> tag) renders an HTML form element that has both name and id attributes. The name attribute is deprecated in XHTML 1.1. Therefore, this control does not render the name attribute in ASP.NET 4. Maintaining Backward Compatibility in Control Rendering An existing ASP.NET Web site might have code in it that assumes that controls are rendering HTML the way they do in ASP.NET 3.5. To avoid causing backward compatibility problems when you upgrade the site to ASP.NET 4, you can have ASP.NET continue to generate HTML the way it does in ASP.NET 3.5 after you upgrade the site. To do so, you can set the controlRenderingCompatibilityVersion attribute of the pages element to "3.5" in the Web.config file of an ASP.NET 4 Web site, as shown in the following example: <system.web>   <pages controlRenderingCompatibilityVersion="3.5"/> </system.web> If this setting is omitted, the default value is the same as the version of ASP.NET that the Web site targets. (For information about multi-targeting in ASP.NET, see .NET Framework Multi-Targeting for ASP.NET Web Projects.) ASP.NET MVC ASP.NET MVC helps Web developers build compelling standards-based Web sites that are easy to maintain because it decreases the dependency among application layers by using the Model-View-Controller (MVC) pattern. MVC provides complete control over the page markup. It also improves testability by inherently supporting Test Driven Development (TDD). Web sites created using ASP.NET MVC have a modular architecture. This allows members of a team to work independently on the various modules and can be used to improve collaboration. For example, developers can work on the model and controller layers (data and logic), while the designer work on the view (presentation). For tutorials, walkthroughs, conceptual content, code samples, and a complete API reference, see ASP.NET MVC 2. Dynamic Data Dynamic Data was introduced in the .NET Framework 3.5 SP1 release in mid-2008. This feature provides many enhancements for creating data-driven applications, such as the following: A RAD experience for quickly building a data-driven Web site. Automatic validation that is based on constraints defined in the data model. The ability to easily change the markup that is generated for fields in the GridView and DetailsView controls by using field templates that are part of your Dynamic Data project. For ASP.NET 4, Dynamic Data has been enhanced to give developers even more power for quickly building data-driven Web sites. For more information, see ASP.NET Dynamic Data Content Map. Enabling Dynamic Data for Individual Data-Bound Controls in Existing Web Applications You can use Dynamic Data features in existing ASP.NET Web applications that do not use scaffolding by enabling Dynamic Data for individual data-bound controls. Dynamic Data provides the presentation and data layer support for rendering these controls. When you enable Dynamic Data for data-bound controls, you get the following benefits: Setting default values for data fields. Dynamic Data enables you to provide default values at run time for fields in a data control. Interacting with the database without creating and registering a data model. Automatically validating the data that is entered by the user without writing any code. For more information, see Walkthrough: Enabling Dynamic Data in ASP.NET Data-Bound Controls. New Field Templates for URLs and E-mail Addresses ASP.NET 4 introduces two new built-in field templates, EmailAddress.ascx and Url.ascx. These templates are used for fields that are marked as EmailAddress or Url using the DataTypeAttribute attribute. For EmailAddress objects, the field is displayed as a hyperlink that is created by using the mailto: protocol. When users click the link, it opens the user's e-mail client and creates a skeleton message. Objects typed as Url are displayed as ordinary hyperlinks. The following example shows how to mark fields. [DataType(DataType.EmailAddress)] public object HomeEmail { get; set; } [DataType(DataType.Url)] public object Website { get; set; } Creating Links with the DynamicHyperLink Control Dynamic Data uses the new routing feature that was added in the .NET Framework 3.5 SP1 to control the URLs that users see when they access the Web site. The new DynamicHyperLink control makes it easy to build links to pages in a Dynamic Data site. For information, see How to: Create Table Action Links in Dynamic Data Support for Inheritance in the Data Model Both the ADO.NET Entity Framework and LINQ to SQL support inheritance in their data models. An example of this might be a database that has an InsurancePolicy table. It might also contain CarPolicy and HousePolicy tables that have the same fields as InsurancePolicy and then add more fields. Dynamic Data has been modified to understand inherited objects in the data model and to support scaffolding for the inherited tables. For more information, see Walkthrough: Mapping Table-per-Hierarchy Inheritance in Dynamic Data. Support for Many-to-Many Relationships (Entity Framework Only) The Entity Framework has rich support for many-to-many relationships between tables, which is implemented by exposing the relationship as a collection on an Entity object. New field templates (ManyToMany.ascx and ManyToMany_Edit.ascx) have been added to provide support for displaying and editing data that is involved in many-to-many relationships. For more information, see Working with Many-to-Many Data Relationships in Dynamic Data. New Attributes to Control Display and Support Enumerations The DisplayAttribute has been added to give you additional control over how fields are displayed. The DisplayNameAttribute attribute in earlier versions of Dynamic Data enabled you to change the name that is used as a caption for a field. The new DisplayAttribute class lets you specify more options for displaying a field, such as the order in which a field is displayed and whether a field will be used as a filter. The attribute also provides independent control of the name that is used for the labels in a GridView control, the name that is used in a DetailsView control, the help text for the field, and the watermark used for the field (if the field accepts text input). The EnumDataTypeAttribute class has been added to let you map fields to enumerations. When you apply this attribute to a field, you specify an enumeration type. Dynamic Data uses the new Enumeration.ascx field template to create UI for displaying and editing enumeration values. The template maps the values from the database to the names in the enumeration. Enhanced Support for Filters Dynamic Data 1.0 had built-in filters for Boolean columns and foreign-key columns. The filters did not let you specify the order in which they were displayed. The new DisplayAttribute attribute addresses this by giving you control over whether a column appears as a filter and in what order it will be displayed. An additional enhancement is that filtering support has been rewritten to use the new QueryExtender feature of Web Forms. This lets you create filters without requiring knowledge of the data source control that the filters will be used with. Along with these extensions, filters have also been turned into template controls, which lets you add new ones. Finally, the DisplayAttribute class mentioned earlier allows the default filter to be overridden, in the same way that UIHint allows the default field template for a column to be overridden. For more information, see Walkthrough: Filtering Rows in Tables That Have a Parent-Child Relationship and QueryableFilterRepeater. ASP.NET Chart Control The ASP.NET chart server control enables you to create ASP.NET pages applications that have simple, intuitive charts for complex statistical or financial analysis. The chart control supports the following features: Data series, chart areas, axes, legends, labels, titles, and more. Data binding. Data manipulation, such as copying, splitting, merging, alignment, grouping, sorting, searching, and filtering. Statistical formulas and financial formulas. Advanced chart appearance, such as 3-D, anti-aliasing, lighting, and perspective. Events and customizations. Interactivity and Microsoft Ajax. Support for the Ajax Content Delivery Network (CDN), which provides an optimized way for you to add Microsoft Ajax Library and jQuery scripts to your Web applications. For more information, see Chart Web Server Control Overview. Visual Web Developer Enhancements The following sections provide information about enhancements and new features in Visual Studio 2010 and Visual Web Developer Express. The Web page designer in Visual Studio 2010 has been enhanced for better CSS compatibility, includes additional support for HTML and ASP.NET markup snippets, and features a redesigned version of IntelliSense for JScript. Improved CSS Compatibility The Visual Web Developer designer in Visual Studio 2010 has been updated to improve CSS 2.1 standards compliance. The designer better preserves HTML source code and is more robust than in previous versions of Visual Studio. HTML and JScript Snippets In the HTML editor, IntelliSense auto-completes tag names. The IntelliSense Snippets feature auto-completes whole tags and more. In Visual Studio 2010, IntelliSense snippets are supported for JScript, alongside C# and Visual Basic, which were supported in earlier versions of Visual Studio. Visual Studio 2010 includes over 200 snippets that help you auto-complete common ASP.NET and HTML tags, including required attributes (such as runat="server") and common attributes specific to a tag (such as ID, DataSourceID, ControlToValidate, and Text). You can download additional snippets, or you can write your own snippets that encapsulate the blocks of markup that you or your team use for common tasks. For more information on HTML snippets, see Walkthrough: Using HTML Snippets. JScript IntelliSense Enhancements In Visual 2010, JScript IntelliSense has been redesigned to provide an even richer editing experience. IntelliSense now recognizes objects that have been dynamically generated by methods such as registerNamespace and by similar techniques used by other JavaScript frameworks. Performance has been improved to analyze large libraries of script and to display IntelliSense with little or no processing delay. Compatibility has been significantly increased to support almost all third-party libraries and to support diverse coding styles. Documentation comments are now parsed as you type and are immediately leveraged by IntelliSense. Web Application Deployment with Visual Studio 2010 For Web application projects, Visual Studio now provides tools that work with the IIS Web Deployment Tool (Web Deploy) to automate many processes that had to be done manually in earlier versions of ASP.NET. For example, the following tasks can now be automated: Creating an IIS application on the destination computer and configuring IIS settings. Copying files to the destination computer. Changing Web.config settings that must be different in the destination environment. Propagating changes to data or data structures in SQL Server databases that are used by the Web application. For more information about Web application deployment, see ASP.NET Deployment Content Map. Enhancements to ASP.NET Multi-Targeting ASP.NET 4 adds new features to the multi-targeting feature to make it easier to work with projects that target earlier versions of the .NET Framework. Multi-targeting was introduced in ASP.NET 3.5 to enable you to use the latest version of Visual Studio without having to upgrade existing Web sites or Web services to the latest version of the .NET Framework. In Visual Studio 2008, when you work with a project targeted for an earlier version of the .NET Framework, most features of the development environment adapt to the targeted version. However, IntelliSense displays language features that are available in the current version, and property windows display properties available in the current version. In Visual Studio 2010, only language features and properties available in the targeted version of the .NET Framework are shown. For more information about multi-targeting, see the following topics: .NET Framework Multi-Targeting for ASP.NET Web Projects ASP.NET Side-by-Side Execution Overview How to: Host Web Applications That Use Different Versions of the .NET Framework on the Same Server How to: Deploy Web Site Projects Targeted for Earlier Versions of the .NET Framework

  Read the article

• Building a better mouse-trap &ndash; Improving the creation of XML Message Requests using Reflection, XML &amp; XSLT

  - by paulschapman

  Introduction The way I previously created messages to send to the GovTalk service I used the XMLDocument to create the request. While this worked it left a number of problems; not least that for every message a special function would need to created. This is OK for the short term but the biggest cost in any software project is maintenance and this would be a headache to maintain. So the following is a somewhat better way of achieving the same thing. For the purposes of this article I am going to be using the CompanyNumberSearch request of the GovTalk service – although this technique would work for any service that accepted XML. The C# functions which send and receive the messages remain the same. The magic sauce in this is the XSLT which defines the structure of the request, and the use of objects in conjunction with reflection to provide the content. It is a bit like Sweet Chilli Sauce added to Chicken on a bed of rice. So on to the Sweet Chilli Sauce The Sweet Chilli Sauce The request to search for a company based on it’s number is as follows; <GovTalkMessage xsi:schemaLocation="http://www.govtalk.gov.uk/CM/envelope http://xmlgw.companieshouse.gov.uk/v1-0/schema/Egov_ch-v2-0.xsd" xmlns="http://www.govtalk.gov.uk/CM/envelope" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" > <EnvelopeVersion>1.0</EnvelopeVersion> <Header> <MessageDetails> <Class>NumberSearch</Class> <Qualifier>request</Qualifier> <TransactionID>1</TransactionID> </MessageDetails> <SenderDetails> <IDAuthentication> <SenderID>????????????????????????????????</SenderID> <Authentication> <Method>CHMD5</Method> <Value>????????????????????????????????</Value> </Authentication> </IDAuthentication> </SenderDetails> </Header> <GovTalkDetails> <Keys/> </GovTalkDetails> <Body> <NumberSearchRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlgw.companieshouse.gov.uk/v1-0/schema/NumberSearch.xsd"> <PartialCompanyNumber>99999999</PartialCompanyNumber> <DataSet>LIVE</DataSet> <SearchRows>1</SearchRows> </NumberSearchRequest> </Body> </GovTalkMessage> This is the XML that we send to the GovTalk Service and we get back a list of companies that match the criteria passed A message is structured in two parts; The envelope which identifies the person sending the request, with the name of the request, and the body which gives the detail of the company we are looking for. The Chilli What makes it possible is the use of XSLT to define the message – and serialization to convert each request object into XML. To start we need to create an object which will represent the contents of the message we are sending. However there is a common properties in all the messages that we send to Companies House. These properties are as follows SenderId – the id of the person sending the message SenderPassword – the password associated with Id TransactionId – Unique identifier for the message AuthenticationValue – authenticates the request Because these properties are unique to the Companies House message, and because they are shared with all messages they are perfect candidates for a base class. The class is as follows; using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Security.Cryptography; using System.Text; using System.Text.RegularExpressions; using Microsoft.WindowsAzure.ServiceRuntime; namespace CompanyHub.Services { public class GovTalkRequest { public GovTalkRequest() { try { SenderID = RoleEnvironment.GetConfigurationSettingValue("SenderId"); SenderPassword = RoleEnvironment.GetConfigurationSettingValue("SenderPassword"); TransactionId = DateTime.Now.Ticks.ToString(); AuthenticationValue = EncodePassword(String.Format("{0}{1}{2}", SenderID, SenderPassword, TransactionId)); } catch (System.Exception ex) { throw ex; } } /// <summary> /// returns the Sender ID to be used when communicating with the GovTalk Service /// </summary> public String SenderID { get; set; } /// <summary> /// return the password to be used when communicating with the GovTalk Service /// </summary> public String SenderPassword { get; set; } // end SenderPassword /// <summary> /// Transaction Id - uses the Time and Date converted to Ticks /// </summary> public String TransactionId { get; set; } // end TransactionId /// <summary> /// calculate the authentication value that will be used when /// communicating with /// </summary> public String AuthenticationValue { get; set; } // end AuthenticationValue property /// <summary> /// encodes password(s) using MD5 /// </summary> /// <param name="clearPassword"></param> /// <returns></returns> public static String EncodePassword(String clearPassword) { MD5CryptoServiceProvider md5Hasher = new MD5CryptoServiceProvider(); byte[] hashedBytes; UTF32Encoding encoder = new UTF32Encoding(); hashedBytes = md5Hasher.ComputeHash(ASCIIEncoding.Default.GetBytes(clearPassword)); String result = Regex.Replace(BitConverter.ToString(hashedBytes), "-", "").ToLower(); return result; } } } There is nothing particularly clever here, except for the EncodePassword method which hashes the value made up of the SenderId, Password and Transaction id. Each message inherits from this object. So for the Company Number Search in addition to the properties above we need a partial number, which dataset to search – for the purposes of the project we only need to search the LIVE set so this can be set in the constructor and the SearchRows. Again all are set as properties. With the SearchRows and DataSet initialized in the constructor. public class CompanyNumberSearchRequest : GovTalkRequest, IDisposable { /// <summary> /// /// </summary> public CompanyNumberSearchRequest() : base() { DataSet = "LIVE"; SearchRows = 1; } /// <summary> /// Company Number to search against /// </summary> public String PartialCompanyNumber { get; set; } /// <summary> /// What DataSet should be searched for the company /// </summary> public String DataSet { get; set; } /// <summary> /// How many rows should be returned /// </summary> public int SearchRows { get; set; } public void Dispose() { DataSet = String.Empty; PartialCompanyNumber = String.Empty; DataSet = "LIVE"; SearchRows = 1; } } As well as inheriting from our base class, I have also inherited from IDisposable – not just because it is just plain good practice to dispose of objects when coding, but it gives also gives us more versatility when using the object. There are four stages in making a request and this is reflected in the four methods we execute in making a call to the Companies House service; Create a request Send a request Check the status If OK then get the results of the request I’ve implemented each of these stages within a static class called Toolbox – which also means I don’t need to create an instance of the class to use it. When making a request there are three stages; Get the template for the message Serialize the object representing the message Transform the serialized object using a predefined XSLT file. Each of my templates I have defined as an embedded resource. When retrieving a resource of this kind we have to include the full namespace to the resource. In making the code re-usable as much as possible I defined the full ‘path’ within the GetRequest method. requestFile = String.Format("CompanyHub.Services.Schemas.{0}", RequestFile); So we now have the full path of the file within the assembly. Now all we need do is retrieve the assembly and get the resource. asm = Assembly.GetExecutingAssembly(); sr = asm.GetManifestResourceStream(requestFile); Once retrieved  So this can be returned to the calling function and we now have a stream of XSLT to define the message. Time now to serialize the request to create the other side of this message. // Serialize object containing Request, Load into XML Document t = Obj.GetType(); ms = new MemoryStream(); serializer = new XmlSerializer(t); xmlTextWriter = new XmlTextWriter(ms, Encoding.ASCII); serializer.Serialize(xmlTextWriter, Obj); ms = (MemoryStream)xmlTextWriter.BaseStream; GovTalkRequest = Toolbox.ConvertByteArrayToString(ms.ToArray()); First off we need the type of the object so we make a call to the GetType method of the object containing the Message properties. Next we need a MemoryStream, XmlSerializer and an XMLTextWriter so these can be initialized. The object is serialized by making the call to the Serialize method of the serializer object. The result of that is then converted into a MemoryStream. That MemoryStream is then converted into a string. ConvertByteArrayToString This is a fairly simple function which uses an ASCIIEncoding object found within the System.Text namespace to convert an array of bytes into a string. public static String ConvertByteArrayToString(byte[] bytes) { System.Text.ASCIIEncoding enc = new System.Text.ASCIIEncoding(); return enc.GetString(bytes); } I only put it into a function because I will be using this in various places. The Sauce When adding support for other messages outside of creating a new object to store the properties of the message, the C# components do not need to change. It is in the XSLT file that the versatility of the technique lies. The XSLT file determines the format of the message. For the CompanyNumberSearch the XSLT file is as follows; <?xml version="1.0"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:template match="/"> <GovTalkMessage xsi:schemaLocation="http://www.govtalk.gov.uk/CM/envelope http://xmlgw.companieshouse.gov.uk/v1-0/schema/Egov_ch-v2-0.xsd" xmlns="http://www.govtalk.gov.uk/CM/envelope" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" > <EnvelopeVersion>1.0</EnvelopeVersion> <Header> <MessageDetails> <Class>NumberSearch</Class> <Qualifier>request</Qualifier> <TransactionID> <xsl:value-of select="CompanyNumberSearchRequest/TransactionId"/> </TransactionID> </MessageDetails> <SenderDetails> <IDAuthentication> <SenderID><xsl:value-of select="CompanyNumberSearchRequest/SenderID"/></SenderID> <Authentication> <Method>CHMD5</Method> <Value> <xsl:value-of select="CompanyNumberSearchRequest/AuthenticationValue"/> </Value> </Authentication> </IDAuthentication> </SenderDetails> </Header> <GovTalkDetails> <Keys/> </GovTalkDetails> <Body> <NumberSearchRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlgw.companieshouse.gov.uk/v1-0/schema/NumberSearch.xsd"> <PartialCompanyNumber> <xsl:value-of select="CompanyNumberSearchRequest/PartialCompanyNumber"/> </PartialCompanyNumber> <DataSet> <xsl:value-of select="CompanyNumberSearchRequest/DataSet"/> </DataSet> <SearchRows> <xsl:value-of select="CompanyNumberSearchRequest/SearchRows"/> </SearchRows> </NumberSearchRequest> </Body> </GovTalkMessage> </xsl:template> </xsl:stylesheet> The outer two tags define that this is a XSLT stylesheet and the root tag from which the nodes are searched for. The GovTalkMessage is the format of the message that will be sent to Companies House. We first set up the XslCompiledTransform object which will transform the XSLT template and the serialized object into the request to Companies House. xslt = new XslCompiledTransform(); resultStream = new MemoryStream(); writer = new XmlTextWriter(resultStream, Encoding.ASCII); doc = new XmlDocument(); The Serialize method require XmlTextWriter to write the XML (writer) and a stream to place the transferred object into (writer). The XML will be loaded into an XMLDocument object (doc) prior to the transformation. // create XSLT Template xslTemplate = Toolbox.GetRequest(Template); xslTemplate.Seek(0, SeekOrigin.Begin); templateReader = XmlReader.Create(xslTemplate); xslt.Load(templateReader); I have stored all the templates as a series of Embedded Resources and the GetRequestCall takes the name of the template and extracts the relevent XSLT file. /// <summary> /// Gets the framwork XML which makes the request /// </summary> /// <param name="RequestFile"></param> /// <returns></returns> public static Stream GetRequest(String RequestFile) { String requestFile = String.Empty; Stream sr = null; Assembly asm = null; try { requestFile = String.Format("CompanyHub.Services.Schemas.{0}", RequestFile); asm = Assembly.GetExecutingAssembly(); sr = asm.GetManifestResourceStream(requestFile); } catch (Exception) { throw; } finally { asm = null; } return sr; } // end private static stream GetRequest We first take the template name and expand it to include the full namespace to the Embedded Resource I like to keep all my schemas in the same directory and so the namespace reflects this. The rest is the default namespace for the project. Then we get the currently executing assembly (which will contain the resources with the call to GetExecutingAssembly() ) Finally we get a stream which contains the XSLT file. We use this stream and then load an XmlReader with the contents of the template, and that is in turn loaded into the XslCompiledTransform object. We convert the object containing the message properties into Xml by serializing it; calling the Serialize() method of the XmlSerializer object. To set up the object we do the following; t = Obj.GetType(); ms = new MemoryStream(); serializer = new XmlSerializer(t); xmlTextWriter = new XmlTextWriter(ms, Encoding.ASCII); We first determine the type of the object being transferred by calling GetType() We create an XmlSerializer object by passing the type of the object being serialized. The serializer writes to a memory stream and that is linked to an XmlTextWriter. Next job is to serialize the object and load it into an XmlDocument. serializer.Serialize(xmlTextWriter, Obj); ms = (MemoryStream)xmlTextWriter.BaseStream; xmlRequest = new XmlTextReader(ms); GovTalkRequest = Toolbox.ConvertByteArrayToString(ms.ToArray()); doc.LoadXml(GovTalkRequest); Time to transform the XML to construct the full request. xslt.Transform(doc, writer); resultStream.Seek(0, SeekOrigin.Begin); request = Toolbox.ConvertByteArrayToString(resultStream.ToArray()); So that creates the full request to be sent  to Companies House. Sending the request So far we have a string with a request for the Companies House service. Now we need to send the request to the Companies House Service. Configuration within an Azure project There are entire blog entries written about configuration within an Azure project – most of this is out of scope for this article but the following is a summary. Configuration is defined in two files within the parent project *.csdef which contains the definition of configuration setting. <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="OnlineCompanyHub" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WebRole name="CompanyHub.Host"> <InputEndpoints> <InputEndpoint name="HttpIn" protocol="http" port="80" /> </InputEndpoints> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" /> <Setting name="DataConnectionString" /> </ConfigurationSettings> </WebRole> <WebRole name="CompanyHub.Services"> <InputEndpoints> <InputEndpoint name="HttpIn" protocol="http" port="8080" /> </InputEndpoints> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" /> <Setting name="SenderId"/> <Setting name="SenderPassword" /> <Setting name="GovTalkUrl"/> </ConfigurationSettings> </WebRole> <WorkerRole name="CompanyHub.Worker"> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" /> </ConfigurationSettings> </WorkerRole> </ServiceDefinition>   Above is the configuration definition from the project. What we are interested in however is the ConfigurationSettings tag of the CompanyHub.Services WebRole. There are four configuration settings here, but at the moment we are interested in the second to forth settings; SenderId, SenderPassword and GovTalkUrl The value of these settings are defined in the ServiceDefinition.cscfg file; <?xml version="1.0"?> <ServiceConfiguration serviceName="OnlineCompanyHub" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration"> <Role name="CompanyHub.Host"> <Instances count="2" /> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="DataConnectionString" value="UseDevelopmentStorage=true" /> </ConfigurationSettings> </Role> <Role name="CompanyHub.Services"> <Instances count="2" /> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="SenderId" value="UserID"/> <Setting name="SenderPassword" value="Password"/> <Setting name="GovTalkUrl" value="http://xmlgw.companieshouse.gov.uk/v1-0/xmlgw/Gateway"/> </ConfigurationSettings> </Role> <Role name="CompanyHub.Worker"> <Instances count="2" /> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" value="UseDevelopmentStorage=true" /> </ConfigurationSettings> </Role> </ServiceConfiguration>   Look for the Role tag that contains our project name (CompanyHub.Services). Having configured the parameters we can now transmit the request. This is done by ‘POST’ing a stream of XML to the Companies House servers. govTalkUrl = RoleEnvironment.GetConfigurationSettingValue("GovTalkUrl"); request = WebRequest.Create(govTalkUrl); request.Method = "POST"; request.ContentType = "text/xml"; writer = new StreamWriter(request.GetRequestStream()); writer.WriteLine(RequestMessage); writer.Close(); We use the WebRequest object to send the object. Set the method of sending to ‘POST’ and the type of data as text/xml. Once set up all we do is write the request to the writer – this sends the request to Companies House. Did the Request Work Part I – Getting the response Having sent a request – we now need the result of that request. response = request.GetResponse(); reader = response.GetResponseStream(); result = Toolbox.ConvertByteArrayToString(Toolbox.ReadFully(reader));   The WebRequest object has a GetResponse() method which allows us to get the response sent back. Like many of these calls the results come in the form of a stream which we convert into a string. Did the Request Work Part II – Translating the Response Much like XSLT and XML were used to create the original request, so it can be used to extract the response and by deserializing the result we create an object that contains the response. Did it work? It would be really great if everything worked all the time. Of course if it did then I don’t suppose people would pay me and others the big bucks so that our programmes do not a) Collapse in a heap (this is an area of memory) b) Blow every fuse in the place in a shower of sparks (this will probably not happen this being real life and not a Hollywood movie, but it was possible to blow the sound system of a BBC Model B with a poorly coded setting) c) Go nuts and trap everyone outside the airlock (this was from a movie, and unless NASA get a manned moon/mars mission set up unlikely to happen) d) Go nuts and take over the world (this was also from a movie, but please note life has a habit of being of exceeding the wildest imaginations of Hollywood writers (note writers – Hollywood executives have no imagination and judging by recent output of that town have turned plagiarism into an art form). e) Freeze in total confusion because the cleaner pulled the plug to the internet router (this has happened) So anyway – we need to check to see if our request actually worked. Within the GovTalk response there is a section that details the status of the message and a description of what went wrong (if anything did). I have defined an XSLT template which will extract these into an XML document. <?xml version="1.0"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ev="http://www.govtalk.gov.uk/CM/envelope" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <xsl:template match="/"> <GovTalkStatus xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Status> <xsl:value-of select="ev:GovTalkMessage/ev:Header/ev:MessageDetails/ev:Qualifier"/> </Status> <Text> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Text"/> </Text> <Location> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Location"/> </Location> <Number> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Number"/> </Number> <Type> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Type"/> </Type> </GovTalkStatus> </xsl:template> </xsl:stylesheet>   Only thing different about previous XSL files is the references to two namespaces ev & gt. These are defined in the GovTalk response at the top of the response; xsi:schemaLocation="http://www.govtalk.gov.uk/CM/envelope http://xmlgw.companieshouse.gov.uk/v1-0/schema/Egov_ch-v2-0.xsd" xmlns="http://www.govtalk.gov.uk/CM/envelope" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" If we do not put these references into the XSLT template then  the XslCompiledTransform object will not be able to find the relevant tags. Deserialization is a fairly simple activity. encoder = new ASCIIEncoding(); ms = new MemoryStream(encoder.GetBytes(statusXML)); serializer = new XmlSerializer(typeof(GovTalkStatus)); xmlTextWriter = new XmlTextWriter(ms, Encoding.ASCII); messageStatus = (GovTalkStatus)serializer.Deserialize(ms);   We set up a serialization object using the object type containing the error state and pass to it the results of a transformation between the XSLT above and the GovTalk response. Now we have an object containing any error state, and the error message. All we need to do is check the status. If there is an error then we can flag an error. If not then  we extract the results and pass that as an object back to the calling function. We go this by guess what – defining an XSLT template for the result and using that to create an Xml Stream which can be deserialized into a .Net object. In this instance the XSLT to create the result of a Company Number Search is; <?xml version="1.0" encoding="us-ascii"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ev="http://www.govtalk.gov.uk/CM/envelope" xmlns:sch="http://xmlgw.companieshouse.gov.uk/v1-0/schema" exclude-result-prefixes="ev"> <xsl:template match="/"> <CompanySearchResult xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <CompanyNumber> <xsl:value-of select="ev:GovTalkMessage/ev:Body/sch:NumberSearch/sch:CoSearchItem/sch:CompanyNumber"/> </CompanyNumber> <CompanyName> <xsl:value-of select="ev:GovTalkMessage/ev:Body/sch:NumberSearch/sch:CoSearchItem/sch:CompanyName"/> </CompanyName> </CompanySearchResult> </xsl:template> </xsl:stylesheet> and the object definition is; using System; using System.Collections.Generic; using System.Linq; using System.Web; namespace CompanyHub.Services { public class CompanySearchResult { public CompanySearchResult() { CompanyNumber = String.Empty; CompanyName = String.Empty; } public String CompanyNumber { get; set; } public String CompanyName { get; set; } } } Our entire code to make calls to send a request, and interpret the results are; String request = String.Empty; String response = String.Empty; GovTalkStatus status = null; fault = null; try { using (CompanyNumberSearchRequest requestObj = new CompanyNumberSearchRequest()) { requestObj.PartialCompanyNumber = CompanyNumber; request = Toolbox.CreateRequest(requestObj, "CompanyNumberSearch.xsl"); response = Toolbox.SendGovTalkRequest(request); status = Toolbox.GetMessageStatus(response); if (status.Status.ToLower() == "error") { fault = new HubFault() { Message = status.Text }; } else { Object obj = Toolbox.GetGovTalkResponse(response, "CompanyNumberSearchResult.xsl", typeof(CompanySearchResult)); } } } catch (FaultException<ArgumentException> ex) { fault = new HubFault() { FaultType = ex.Detail.GetType().FullName, Message = ex.Detail.Message }; } catch (System.Exception ex) { fault = new HubFault() { FaultType = ex.GetType().FullName, Message = ex.Message }; } finally { } Wrap up So there we have it – a reusable set of functions to send and interpret XML results from an internet based service. The code is reusable with a little change with any service which uses XML as a transport mechanism – and as for the Companies House GovTalk service all I need to do is create various objects for the result and message sent and the relevent XSLT files. I might need minor changes for other services but something like 70-90% will be exactly the same.

  Read the article

• Solaris OpenStack Horizon customizations

  - by GirishMoodalbail-Oracle

  In Oracle Solaris OpenStack Havana, we have customized the Horizon BUI by modifying existing dashboard and panels to reflect only those features that we support. The modification mostly involves:  --  disabling an widget (checkbox, button, textarea, and so on) --  removal of a tab from a panel --  removal of options from pull-down menus The following table lists the customizations that we have made. |-----------------------------+-----------------------------------------------------| | Where                       | What                                                | |-----------------------------+-----------------------------------------------------| | Project => Instances =>     | Post-Creation tab is removed.                       | | Launch Instance             |                                                     | |                             |                                                     | | Project => Instances =>     | Security Groups tab is removed.                     | | Actions => Edit Instance    |                                                     | |                             |                                                     | | Project => Instances =>     | Console tab is removed.                             | | Instance Name               |                                                     | |                             |                                                     | | Project => Instances =>     | Following actions Console, Edit Security Groups,    | | Actions                     | Pause Instance, Suspend Instance, Resize Instance,  | |                             | Rebuild Instance, and Migrate Instance are removed. | |                             |                                                     | | Project =>                  | Security Groups tab is removed.                     | | Access and Security         |                                                     | |                             |                                                     | | Project =>                  | Create Volume action is removed.                    | | Images and Snapshots =>     |                                                     | | Images => Actions           |                                                     | |                             |                                                     | | Project => Networks =>      | Admin State is disabled and its value is always     | | Create Network              | true.                                               | |                             |                                                     | | Project => Networks =>      | Disable Gateway checkbox is disabled, and its       | | Create Network =>           | value is always false.                              | | Subnet                      |                                                     | |                             |                                                     | | Project => Networks =>      | Allocation Pools and Host Routes text area are      | | Create Network =>           | disabled.                                      | | Subnet Detail               |                                                     | |                             |                                                     | | Project => Networks =>      | Edit Subnet action is removed.                      | | Network Name => Subnet =>   |                                                     | | Actions                     |                                                     | |                             |                                                     | | Project => Networks =>      | Edit Port action is removed.                        | | Network Name => Ports =>    |                                                     | | Actions                     |                                                     | |                             |                                                     | | Admin => Instnaces =>       | Following actions Console, Pause Instance,          | | Actions                     | Suspend Instance, and Migrate Instance are removed. | |                             |                                                     | | Admin => Networks =>        | Edit Network action is removed                      | | Actions                     |                                                     | |                             |                                                     | | Admin => Networks =>         | Edit Subnet action is removed                       | | Subnets => Actions          |                                                     | |                             |                                                     | | Admin => Networks =>         | Edit Port action is removed                         | | Ports => Actions            |                                                     | |                             |                                                     | | Admin => Networks =>         | Admin State and Shared check box are disabled.      | | Create Network              | Network's Admin State is always true, and Shared is | |                             | always false.                                       | |                             |                                                     | | Admin => Networks =>        | Admin State check box is disabled and its value     | | Network Name => Create Port | is always true.                                     | |-----------------------------+-----------------------------------------------------|

  Read the article

• FreeBSD performance tuning. Sysctls, loader.conf, kernel

  - by SaveTheRbtz

  I wanted to share knowledge of tuning FreeBSD via sysctl.conf/loader.conf/KENCONF. It was initially based on Igor Sysoev's (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Tunings are for FreeBSD-CURRENT. Since 7.2 amd64 some of them are tuned well by default. Prior 7.0 some of them are boot only (set via /boot/loader.conf) or does not exist at all. sysctl.conf: # No zero mapping feature # May break wine # (There are also reports about broken samba3) #security.bsd.map_at_zero=0 # If you have really busy webserver with apache13 you may run out of processes #kern.maxproc=10000 # Same for servers with apache2 / Pound #kern.threads.max_threads_per_proc=4096 # Max. backlog size kern.ipc.somaxconn=4096 # Shared memory // 7.2+ can use shared memory > 2Gb kern.ipc.shmmax=2147483648 # Sockets kern.ipc.maxsockets=204800 # Can cause this on older kernels: # http://old.nabble.com/Significant-performance-regression-for-increased-maxsockbuf-on-8.0-RELEASE-tt26745981.html#a26745981 ) kern.ipc.maxsockbuf=10485760 # Mbuf 2k clusters (on amd64 7.2+ 25600 is default) # For such high value vm.kmem_size must be increased to 3G kern.ipc.nmbclusters=262144 # Jumbo pagesize(_SC_PAGESIZE) clusters # Used as general packet storage for jumbo frames # can be monitored via `netstat -m` #kern.ipc.nmbjumbop=262144 # Jumbo 9k/16k clusters # If you are using them #kern.ipc.nmbjumbo9=65536 #kern.ipc.nmbjumbo16=32768 # For lower latency you can decrease scheduler's maximum time slice # default: stathz/10 (~ 13) #kern.sched.slice=1 # Increase max command-line length showed in `ps` (e.g for Tomcat/Java) # Default is PAGE_SIZE / 16 or 256 on x86 # This avoids commands to be presented as [executable] in `ps` # For more info see: http://www.freebsd.org/cgi/query-pr.cgi?pr=120749 kern.ps_arg_cache_limit=4096 # Every socket is a file, so increase them kern.maxfiles=204800 kern.maxfilesperproc=200000 kern.maxvnodes=200000 # On some systems HPET is almost 2 times faster than default ACPI-fast # Useful on systems with lots of clock_gettime / gettimeofday calls # See http://old.nabble.com/ACPI-fast-default-timecounter,-but-HPET-83--faster-td23248172.html # After revision 222222 HPET became default: http://svnweb.freebsd.org/base?view=revision&revision=222222 kern.timecounter.hardware=HPET # Small receive space, only usable on http-server, on file server this # should be increased to 65535 or even more #net.inet.tcp.recvspace=8192 # This is useful on Fat-Long-Pipes #net.inet.tcp.recvbuf_max=10485760 #net.inet.tcp.recvbuf_inc=65535 # Small send space is useful for http servers that serve small files # Autotuned since 7.x net.inet.tcp.sendspace=16384 # This is useful on Fat-Long-Pipes #net.inet.tcp.sendbuf_max=10485760 #net.inet.tcp.sendbuf_inc=65535 # Turn off receive autotuning # You can play with it. #net.inet.tcp.recvbuf_auto=0 #net.inet.tcp.sendbuf_auto=0 # This should be enabled if you going to use big spaces (>64k) # Also timestamp field is useful when using syncookies net.inet.tcp.rfc1323=1 # Turn this off on high-speed, lossless connections (LAN 1Gbit+) # If you set it there is no need in TCP_NODELAY sockopt (see man tcp) net.inet.tcp.delayed_ack=0 # This feature is useful if you are serving data over modems, Gigabit Ethernet, # or even high speed WAN links (or any other link with a high bandwidth delay product), # especially if you are also using window scaling or have configured a large send window. # Automatically disables on small RTT ( http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_subr.c?#rev1.237 ) # This sysctl was removed in 10-CURRENT: # See: http://www.mail-archive.com/[email protected]/msg06178.html #net.inet.tcp.inflight.enable=0 # TCP slowstart algorithm tunings # We assuming we have very fast clients #net.inet.tcp.slowstart_flightsize=100 #net.inet.tcp.local_slowstart_flightsize=100 # Disable randomizing of ports to avoid false RST # Before usage check SA here www.bsdcan.org/2006/papers/ImprovingTCPIP.pdf # (it's also says that port randomization auto-disables at some conn.rates, but I didn't checked it thou) #net.inet.ip.portrange.randomized=0 # Increase portrange # For outgoing connections only. Good for seed-boxes and ftp servers. net.inet.ip.portrange.first=1024 net.inet.ip.portrange.last=65535 # # stops route cache degregation during a high-bandwidth flood # http://www.freebsd.org/doc/en/books/handbook/securing-freebsd.html #net.inet.ip.rtexpire=2 net.inet.ip.rtminexpire=2 net.inet.ip.rtmaxcache=1024 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # # There is also good example of sysctl.conf with comments: # http://www.thern.org/projects/sysctl.conf # # icmp may NOT rst, helpful for those pesky spoofed # icmp/udp floods that end up taking up your outgoing # bandwidth/ifqueue due to all that outgoing RST traffic. # #net.inet.tcp.icmp_may_rst=0 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # IPv6 Security # For more info see http://www.fosslc.org/drupal/content/security-implications-ipv6 # Disable Node info replies # To see this vulnerability in action run `ping6 -a sglAac ::1` or `ping6 -w ::1` on unprotected node net.inet6.icmp6.nodeinfo=0 # Turn on IPv6 privacy extensions # For more info see proposal http://unix.derkeiler.com/Mailing-Lists/FreeBSD/net/2008-06/msg00103.html net.inet6.ip6.use_tempaddr=1 net.inet6.ip6.prefer_tempaddr=1 # Disable ICMP redirect net.inet6.icmp6.rediraccept=0 # Disable acceptation of RA and auto linklocal generation if you don't use them #net.inet6.ip6.accept_rtadv=0 #net.inet6.ip6.auto_linklocal=0 # Increases default TTL, sometimes useful # Default is 64 net.inet.ip.ttl=128 # Lessen max segment life to conserve resources # ACK waiting time in miliseconds # (default: 30000. RFC from 1979 recommends 120000) net.inet.tcp.msl=5000 # Max bumber of timewait sockets net.inet.tcp.maxtcptw=200000 # Don't use tw on local connections # As of 15 Apr 2009. Igor Sysoev says that nolocaltimewait has some buggy realization. # So disable it or now till get fixed #net.inet.tcp.nolocaltimewait=1 # FIN_WAIT_2 state fast recycle net.inet.tcp.fast_finwait2_recycle=1 # Time before tcp keepalive probe is sent # default is 2 hours (7200000) #net.inet.tcp.keepidle=60000 # Should be increased until net.inet.ip.intr_queue_drops is zero net.inet.ip.intr_queue_maxlen=4096 # Interrupt handling via multiple CPU, but with context switch. # You can play with it. Default is 1; #net.isr.direct=0 # This is for routers only #net.inet.ip.forwarding=1 #net.inet.ip.fastforwarding=1 # This speed ups dummynet when channel isn't saturated net.inet.ip.dummynet.io_fast=1 # Increase dummynet(4) hash #net.inet.ip.dummynet.hash_size=2048 #net.inet.ip.dummynet.max_chain_len # Should be increased when you have A LOT of files on server # (Increase until vfs.ufs.dirhash_mem becomes lower) vfs.ufs.dirhash_maxmem=67108864 # Note from commit http://svn.freebsd.org/base/head@211031 : # For systems with RAID volumes and/or virtualization envirnments, where # read performance is very important, increasing this sysctl tunable to 32 # or even more will demonstratively yield additional performance benefits. vfs.read_max=32 # Explicit Congestion Notification (see http://en.wikipedia.org/wiki/Explicit_Congestion_Notification) net.inet.tcp.ecn.enable=1 # Flowtable - flow caching mechanism # Useful for routers #net.inet.flowtable.enable=1 #net.inet.flowtable.nmbflows=65535 # Extreme polling tuning #kern.polling.burst_max=1000 #kern.polling.each_burst=1000 #kern.polling.reg_frac=100 #kern.polling.user_frac=1 #kern.polling.idle_poll=0 # IPFW dynamic rules and timeouts tuning # Increase dyn_buckets till net.inet.ip.fw.curr_dyn_buckets is lower net.inet.ip.fw.dyn_buckets=65536 net.inet.ip.fw.dyn_max=65536 net.inet.ip.fw.dyn_ack_lifetime=120 net.inet.ip.fw.dyn_syn_lifetime=10 net.inet.ip.fw.dyn_fin_lifetime=2 net.inet.ip.fw.dyn_short_lifetime=10 # Make packets pass firewall only once when using dummynet # i.e. packets going thru pipe are passing out from firewall with accept #net.inet.ip.fw.one_pass=1 # shm_use_phys Wires all shared pages, making them unswappable # Use this to lessen Virtual Memory Manager's work when using Shared Mem. # Useful for databases #kern.ipc.shm_use_phys=1 # ZFS # Enable prefetch. Useful for sequential load type i.e fileserver. # FreeBSD sets vfs.zfs.prefetch_disable to 1 on any i386 systems and # on any amd64 systems with less than 4GB of avaiable memory # For additional info check this nabble thread http://old.nabble.com/Samba-read-speed-performance-tuning-td27964534.html #vfs.zfs.prefetch_disable=0 # On highload servers you may notice following message in dmesg: # "Approaching the limit on PV entries, consider increasing either the # vm.pmap.shpgperproc or the vm.pmap.pv_entry_max tunable" vm.pmap.shpgperproc=2048 loader.conf: # Accept filters for data, http and DNS requests # Useful when your software uses select() instead of kevent/kqueue or when you under DDoS # DNS accf available on 8.0+ accf_data_load="YES" accf_http_load="YES" accf_dns_load="YES" # Async IO system calls aio_load="YES" # Linux specific devices in /dev # As for 8.1 it only /dev/full #lindev_load="YES" # Adds NCQ support in FreeBSD # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ # 8.0+ only #ahci_load="YES" #siis_load="YES" # FreeBSD 8.2+ # New Congestion Control for FreeBSD # http://caia.swin.edu.au/urp/newtcp/tools/cc_chd-readme-0.1.txt # http://www.ietf.org/proceedings/78/slides/iccrg-5.pdf # Initial merge commit message http://www.mail-archive.com/[email protected]/msg31410.html #cc_chd_load="YES" # Increase kernel memory size to 3G. # # Use ONLY if you have KVA_PAGES in kernel configuration, and you have more than 3G RAM # Otherwise panic will happen on next reboot! # # It's required for high buffer sizes: kern.ipc.nmbjumbop, kern.ipc.nmbclusters, etc # Useful on highload stateful firewalls, proxies or ZFS fileservers # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #vm.kmem_size="3G" # If your server has lots of swap (>4Gb) you should increase following value # according to http://lists.freebsd.org/pipermail/freebsd-hackers/2009-October/029616.html # Otherwise you'll be getting errors # "kernel: swap zone exhausted, increase kern.maxswzone" # kern.maxswzone="256M" # Older versions of FreeBSD can't tune maxfiles on the fly #kern.maxfiles="200000" # Useful for databases # Sets maximum data size to 1G # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #kern.maxdsiz="1G" # Maximum buffer size(vfs.maxbufspace) # You can check current one via vfs.bufspace # Should be lowered/upped depending on server's load-type # Usually decreased to preserve kmem # (default is 10% of mem) #kern.maxbcache="512M" # Sendfile buffers # For i386 only #kern.ipc.nsfbufs=10240 # FreeBSD 9+ # HPET "legacy route" support. It should allow HPET to work per-CPU # See http://www.mail-archive.com/[email protected]/msg03603.html #hint.atrtc.0.clock=0 #hint.attimer.0.clock=0 #hint.hpet.0.legacy_route=1 # syncache Hash table tuning net.inet.tcp.syncache.hashsize=1024 net.inet.tcp.syncache.bucketlimit=512 net.inet.tcp.syncache.cachelimit=65536 # Increased hostcache # Later host cache can be viewed via net.inet.tcp.hostcache.list hidden sysctl # Very useful for it's RTT RTTVAR # Must be power of two net.inet.tcp.hostcache.hashsize=65536 # hashsize * bucketlimit (which is 30 by default) # It allocates 255Mb (1966080*136) of RAM net.inet.tcp.hostcache.cachelimit=1966080 # TCP control-block Hash table tuning net.inet.tcp.tcbhashsize=4096 # Disable ipfw deny all # Should be uncommented when there is a chance that # kernel and ipfw binary may be out-of sync on next reboot #net.inet.ip.fw.default_to_accept=1 # # SIFTR (Statistical Information For TCP Research) is a kernel module that # logs a range of statistics on active TCP connections to a log file. # See prerelease notes http://groups.google.com/group/mailing.freebsd.current/browse_thread/thread/b4c18be6cdce76e4 # and man 4 sitfr #siftr_load="YES" # Enable superpages, for 7.2+ only # Also read http://lists.freebsd.org/pipermail/freebsd-hackers/2009-November/030094.html vm.pmap.pg_ps_enabled=1 # Usefull if you are using Intel-Gigabit NIC #hw.em.rxd=4096 #hw.em.txd=4096 #hw.em.rx_process_limit="-1" # Also if you have ALOT interrupts on NIC - play with following parameters # NOTE: You should set them for every NIC #dev.em.0.rx_int_delay: 250 #dev.em.0.tx_int_delay: 250 #dev.em.0.rx_abs_int_delay: 250 #dev.em.0.tx_abs_int_delay: 250 # There is also multithreaded version of em/igb drivers can be found here: # http://people.yandex-team.ru/~wawa/ # # for additional em monitoring and statistics use # sysctl dev.em.0.stats=1 ; dmesg # sysctl dev.em.0.debug=1 ; dmesg # Also after r209242 (-CURRENT) there is a separate sysctl for each stat variable; # Same tunings for igb #hw.igb.rxd=4096 #hw.igb.txd=4096 #hw.igb.rx_process_limit=100 # Some useful netisr tunables. See sysctl net.isr #net.isr.maxthreads=4 #net.isr.defaultqlimit=4096 #net.isr.maxqlimit: 10240 # Bind netisr threads to CPUs #net.isr.bindthreads=1 # # FreeBSD 9.x+ # Increase interface send queue length # See commit message http://svn.freebsd.org/viewvc/base?view=revision&revision=207554 #net.link.ifqmaxlen=1024 # Nicer boot logo =) loader_logo="beastie" And finally here is KERNCONF: # Just some of them, see also # cat /sys/{i386,amd64,}/conf/NOTES # This one useful only on i386 #options KVA_PAGES=512 # You can play with HZ in environments with high interrupt rate (default is 1000) # 100 is for my notebook to prolong it's battery life #options HZ=100 # Polling is goot on network loads with high packet rates and low-end NICs # NB! Do not enable it if you want more than one netisr thread #options DEVICE_POLLING # Eliminate datacopy on socket read-write # To take advantage with zero copy sockets you should have an MTU >= 4k # This req. is only for receiving data. # Read more in man zero_copy_sockets # Also this epic thread on kernel trap: # http://kerneltrap.org/node/6506 # Here Linus says that "anybody that does it that way (FreeBSD) is totally incompetent" #options ZERO_COPY_SOCKETS # Support TCP sign. Used for IPSec options TCP_SIGNATURE # There was stackoverflow found in KAME IPSec stack: # See http://secunia.com/advisories/43995/ # For quick workaround you can use `ipfw add deny proto ipcomp` options IPSEC # This ones can be loaded as modules. They described in loader.conf section #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # Adding ipfw, also can be loaded as modules options IPFIREWALL # On 8.1+ you can disable verbose to see blocked packets on ipfw0 interface. # Also there is no point in compiling verbose into the kernel, because # now there is net.inet.ip.fw.verbose tunable. #options IPFIREWALL_VERBOSE #options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_FORWARD # Adding kernel NAT options IPFIREWALL_NAT options LIBALIAS # Traffic shaping options DUMMYNET # Divert, i.e. for userspace NAT options IPDIVERT # This is for OpenBSD's pf firewall device pf device pflog # pf's QoS - ALTQ options ALTQ options ALTQ_CBQ # Class Bases Queuing (CBQ) options ALTQ_RED # Random Early Detection (RED) options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC) options ALTQ_PRIQ # Priority Queuing (PRIQ) options ALTQ_NOPCC # Required for SMP build # Pretty console # Manual can be found here http://forums.freebsd.org/showthread.php?t=6134 #options VESA #options SC_PIXEL_MODE # Disable reboot on Ctrl Alt Del #options SC_DISABLE_REBOOT # Change normal|kernel messages color options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK) # More scroll space options SC_HISTORY_SIZE=8192 # Adding hardware crypto device device crypto device cryptodev # Useful network interfaces device vlan device tap #Virtual Ethernet driver device gre #IP over IP tunneling device if_bridge #Bridge interface device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPsec interface device lagg #Link aggregation interface device stf #IPv4-IPv6 port # Also for my notebook, but may be used with Opteron device amdtemp # Same for Intel processors device coretemp # man 4 cpuctl device cpuctl # CPU control pseudo-device # Support for ECMP. More than one route for destination # Works even with default route so one can use it as LB for two ISP # For now code is unstable and panics (panic: rtfree 2) on route deletions. #options RADIX_MPATH # Multicast routing #options MROUTING #options PIM # Debug & DTrace options KDB # Kernel debugger related code options KDB_TRACE # Print a stack trace for a panic options KDTRACE_FRAME # amd64-only(?) options KDTRACE_HOOKS # all architectures - enable general DTrace hooks #options DDB #options DDB_CTF # all architectures - kernel ELF linker loads CTF data # Adaptive spining in lockmgr (8.x+) # See http://www.mail-archive.com/[email protected]/msg10782.html options ADAPTIVE_LOCKMGRS # UTF-8 in console (8.x+) #options TEKEN_UTF8 # FreeBSD 8.1+ # Deadlock resolver thread # For additional information see http://www.mail-archive.com/[email protected]/msg18124.html # (FYI: "resolution" is panic so use with caution) #options DEADLKRES # Increase maximum size of Raw I/O and sendfile(2) readahead #options MAXPHYS=(1024*1024) #options MAXBSIZE=(1024*1024) # For scheduler debug enable following option. # Debug will be available via `kern.sched.stats` sysctl # For more information see http://svnweb.freebsd.org/base/head/sys/conf/NOTES?view=markup #options SCHED_STATS If you are tuning network for maximum performance you may wish to play with ifconfig options like: # You can list all capabilities via `ifconfig -m` ifconfig [-]rxcsum [-]txcsum [-]tso [-]lro mtu In case you've enabled DDB in kernel config, you should edit your /etc/ddb.conf and add something like this to enable automatic reboot (and textdump as bonus): script kdb.enter.panic=textdump set; capture on; show pcpu; bt; ps; alltrace; capture off; call doadump; reset script kdb.enter.default=textdump set; capture on; bt; ps; capture off; call doadump; reset And do not forget to add ddb_enable="YES" to /etc/rc.conf Since FreeBSD 9 you can select to enable/disable flowcontrol on your NIC: # See http://en.wikipedia.org/wiki/Ethernet_flow_control and # http://www.mail-archive.com/[email protected]/msg07927.html for additional info ifconfig bge0 media auto mediaopt flowcontrol PS. Also most of FreeBSD's limits can be monitored by # vmstat -z and # limits PPS. variety of network counters can be monitored via # netstat -s In FreeBSD-9 netstat's -Q option appeared, try following command to display netisr stats # netstat -Q PPPS. also see # man 7 tuning PPPPS. I wanted to thank FreeBSD community, especially author of nginx - Igor Sysoev, nginx-ru@ and FreeBSD-performance@ mailing lists for providing useful information about FreeBSD tuning. FreeBSD WIP * Whats cooking for FreeBSD 7? * Whats cooking for FreeBSD 8? * Whats cooking for FreeBSD 9? So here is the question: What tunings are you using on yours FreeBSD servers? You can also post your /etc/sysctl.conf, /boot/loader.conf, kernel options, etc with description of its' meaning (do not copy-paste from sysctl -d). Don't forget to specify server type (web, smb, gateway, etc) Let's share experience!

  Read the article

• unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

  - by jon

  I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

  Read the article

• DHCP settings out of range Internet shuts off after a few minutes

  - by user263115

  I recently upgraded from windows eight to windows 8.1 I do not know if this has anything to do with anything I have a 64 bit OS. My Internet goes off by itself every 5 minutes even though my wireless icon at the lower right of the screen still shows connected I had an error message in the last event in it said that might DHCP settings were out of range. I get my internet at my house through a wireless portable hotspot through my smart phone. But i haven't ever had any problems before and i only have this problem on this network. If i turn airplane mode on and reset my network card, the internet will come back to life but soon die. i don't experience this problem while on a different network or if i'm on WiFi. This s really annoying please help Windows IP Configuration Host Name . . . . . . . . . . . . : NastyMcnastyJr Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TeamViewer VPN Adapter Physical Address. . . . . . . . . : 00-FF-5D-13-26-21 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter Physical Address. . . . . . . . . : F6-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter SAMMY McNASTY: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter Physical Address. . . . . . . . . : F4-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::3107:66bc:cf1f:c776%4(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.43.3(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Friday, November 1, 2013 9:50:20 PM Lease Expires . . . . . . . . . . : Saturday, November 2, 2013 12:56:46 AM Default Gateway . . . . . . . . . : 192.168.43.1 DHCP Server . . . . . . . . . . . : 192.168.43.1 DHCPv6 IAID . . . . . . . . . . . : 83146722 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-F1-98-B4-20-89-84-84-61-BB DNS Servers . . . . . . . . . . . : 192.168.43.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Ethernet: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : 20-89-84-84-61-BB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/26/2013 7:52:23 PM Event ID: 20003 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management has concluded the process to add Service vwifibus for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0. Event Xml: 20003 0 4 7005 0 0x8000000000000000 5118 System NastyMcnastyJr vwifibus \SystemRoot\system32\DRIVERS\vwifibus.sys PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 false true 0 Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/19/2013 3:29:12 PM Event ID: 20001 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management concluded the process to install driver netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0x0. Event Xml: 20001 0 4 7005 0 0x8000000000000000 2015 System NastyMcnastyJr netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf 6.30.223.102 Microsoft PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 {4D36E972-E325-11CE-BFC1-08002BE10318} false false false 0x0 Broadcom 802.11n Network Adapter Log Name: System Source: Microsoft-Windows-DNS-Client Date: 11/2/2013 12:24:59 AM Event ID: 1014 Task Category: (1014) Level: Warning Keywords: (268435456) User: NETWORK SERVICE Computer: NastyMcnastyJr Description: Name resolution for the name www.google.com timed out after none of the configured DNS servers responded. Event Xml: 1014 0 3 1014 0 0x4000000010000000 34771 System NastyMcnastyJr www.google.com 128 02000000C0A82B01000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

  Read the article

• Wired connection periodically disconnects requires ipconfig /release and /renew to reconnect

  - by Sesame

  I just got back into University and after a day of using the internet I suddenly was unable to visit other webpages even though I was still able to chat. I restarted the computer and the internet could no longer visit webpages at all. I got a DNS error from the browser (chrome) and the troubleshooter. The connection comes up as "Network 3" even though It was "Network 2" when it worked. I compared ipconfig /all logs and they seemed identical when it was and was not working. I've found two ways to get internet connection (they no longer work): run ipconfig /release and ipconfig /renew several times set a random address and have the troubleshooter fix the new found dhcp problem (before it says dns cannot fix). I checked and it said DHCP was enabled. But either step one or two usually needs to be repeated several times before the network will change back to "network 2" from the defunct "network 3" and after an hour or so I have problems again. I've tried: Uninstalling windows defender and turning off firewall (windows firewall). Updating Qualcomm Ethernet driver - it is up to date. System Restore (problem resurfaces quickly...it's possible this has something to do with windows update?) Flushing dns and setting dns myself (google one and others). Booting in safe mode with networking...didn't fix anything Reinstalling Ethernet Driver Using other ethernet cable, other wall port. I'm out of ideas. Ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : NGoller Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : Home Ethernet adapter UConnect: Connection-specific DNS Suffix . : Home Description . . . . . . . . . . . : Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 90-2B-34-50-33-F4 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : fd00::2086:628:f0a1:73c3(Preferred) Temporary IPv6 Address. . . . . . : fd00::c86b:370:b1d9:bd73(Preferred) Link-local IPv6 Address . . . . . : fe80::2086:628:f0a1:73c3%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.33(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Wednesday, August 28, 2013 11:58:37 PM Lease Expires . . . . . . . . . . : Thursday, August 29, 2013 11:58:37 PM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.Home: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Home Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes I'm getting these errors commonly: The IP address lease 155.97.227.199 for the Network Card with network address 0x902B345033F4 has been denied by the DHCP server 10.0.1.1 (The DHCP Server sent a DHCPNACK message). Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. By the way, Operating System: Windows 7 - 64 Bit. Have downloaded latest windows updates. Update: And my two fixes don't work any more :( . This is now what happens when I try to Ipconfig /renew: C:\Users\Nikko\Desktop>ipconfig /renew Windows IP Configuration An error occurred while renewing interface Local Area Connection : The name spec ified in the network control block (NCB) is in use on a remote adapter. The NCB is the data. An error occurred while releasing interface Loopback Pseudo-Interface 1 : The sy stem cannot find the file specified. Update 2: So my internet is randomly working again today. The IP address I had before was a local one while the university address should start with 155... I didn't do anything to the settings...it's bizarre that it all of a sudden works. Thanks!

  Read the article

• Installation of SAP Web Application Server 6.20 fails

  - by karthikeyan b

  I tried installing a trial version of SAP NetWeaver 7.1 on Windows Vista on my laptop but I couldn't succeed. Then I tried installing SAP Web Application Server 6.20. The installation goes all the way to 91%, at which point I get some errors and the installation stops. Does anyone have any experience with this? Here's the complete error log below: nfo: INSTGUI.EXE Protocol version is 10. Message checksum is 7613888. Info: INSTGUI MessageFile Start message loading... Info: INSTGUI MessageFile Finished message loading. Info: InstController Prepare {} {} R3SETUP Version: Apr 24 2002 Info: InstController Prepare {} {} Logfile will be set to E:\R3SETUP\BSP.log Check E:\R3SETUP\BSP.log for further messages. Info: CommandFileController SyFileVersionSave {} {} Saving original content of file E:\R3SETUP\BSP.R3S ... Warning: CommandFileController SyFileCopy {} {} Function CopyFile() failed at location SyFileCopy-681 Warning: CommandFileController SyFileCopy {} {} errno: 5: Access is denied. Warning: CommandFileController SyFileCreateWithPermissions {} {} errno: 13: Permission denied Warning: CommandFileController SyPermissionSet {} {} Function SetNamedSecurityInfo() failed for E:\R3SETUP\BSP.R3S at location SyPermissionSet-2484 Warning: CommandFileController SyPermissionSet {} {} errno: 5: Access is denied. Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD KERNEL will not be copied. Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD DATA1 will not be copied. Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD DATA2 will not be copied. Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Warning: ADADBINSTANCE_IND_ADA GetConfirmationFor 2 58 Cleanup database instance BSP for new installation. Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 54 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 54 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1146 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1146 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 718 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 718 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD KERNEL will not be copied. Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD DATA1 will not be copied. Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD DATA2 will not be copied. Info: InstController MakeStepsDeliver 2 309 Requesting Information on CD-ROMs Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Info: CENTRDBINSTANCE_NT_ADA InternalWarmKeyCheck 2 333 The installation phase is starting now. Please look in the log file for further information about current actions. Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 99 Defining Key Values Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 58 Requesting Setup Details Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1206 Setting Users for Single DB landscape Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 75 Stopping the SAP DB Instance Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 247 Stopping the SAP DB remote server Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 1195 Can not read from Z:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: SAPDBSETCDPATH_IND_IND and key: KERNEL_LOCATION Info: InstController MakeStepsDeliver 2 1195 Installing SAP DB Software Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1195 Installing SAP DB Software Info: SAPDBINSTALL_IND_ADA SyCoprocessCreate 2 1195 Creating coprocess E:\\sapdb\NT\I386\sdbinst.exe ... Info: SAPDBINSTALL_IND_ADA ExecuteDo 2 1195 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 120 Extracting SAP DB Tools Software Info: ADAEXTRACTLCTOOLS_NT_ADA SyCoprocessCreate 2 120 Creating coprocess SAPCAR ... Info: ADAEXTRACTLCTOOLS_NT_ADA SyCoprocessCreate 2 120 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: ADAEXTRACTBSPCFG SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: ADAEXTRACTBSPCFG SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 242 Starting VSERVER Info: ADAXSERVER_NT_ADA SyCoprocessCreate 2 242 Creating coprocess C:\sapdb\programs\bin\x_server.exe ... Info: ADAXSERVER_NT_ADA ExecuteDo 2 242 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA1 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA1 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 816 Can not read from Y:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXEDBDATA2 and key: DATA1_LOCATION Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA2 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA2 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 816 Can not read from X:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXEDBDATA3 and key: DATA2_LOCATION Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA3 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA3 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 815 We tried to find the label SAPDB:MINI-WAS-DEMO:620:KERNEL for CD KERNEL in path E:\. But the check was not successfull. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXE and key: KERNEL_LOCATION Info: InstController MakeStepsDeliver 2 815 Extracting the SAP Executables Info: EXTRACTSAPEXE SyCoprocessCreate 2 815 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXE SyCoprocessCreate 2 815 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 223 Setting new Rundirectory. Info: ADADBREGISTER_IND_ADA SyCoprocessCreate 2 223 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADADBREGISTER_IND_ADA ExecuteDo 2 223 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 ADASETDEVSPACES_IND_ADA Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 10 Performing Service BCHECK Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_DEFAULT_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_DEFAULT_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_COLD_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_COLD_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_WARM_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_WARM_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 760 Creating the Default Profile Info: DEFAULTPROFILE_IND_IND SyFileVersionSave 2 760 Saving original content of file C:\MiniWAS\DEFAULT.PFL ... Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1267 Modifying or Creating the TPPARAM File Info: TPPARAMMODIFY_NT_ADA SyFileVersionSave 2 1267 Saving original content of file C:\MiniWAS\trans\bin\TPPARAM ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1111 Creating the Service Entry for the Dispatcher Info: R3DISPATCHERPORT_IND_IND IaServicePortAppend 2 1111 Checking service name sapdp00, protocol tcp, port number 3200 ... Info: R3DISPATCHERPORT_IND_IND IaServicePortAppend 2 1111 Port name sapdp00 is known and the port number 3200 is equal to the existing port number 3200 Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1122 Creating the Service Entry for the Message Server Info: R3MESSAGEPORT_IND_IND IaServicePortAppend 2 1122 Checking service name sapmsBSP, protocol tcp, port number 3600 ... Info: R3MESSAGEPORT_IND_IND IaServicePortAppend 2 1122 Port name sapmsBSP is known and the port number 3600 is equal to the existing port number 3600 Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1114 Creating the Service Entry for the Gateway Service Info: R3GATEWAYPORT_IND_IND IaServicePortAppend 2 1114 Checking service name sapgw00, protocol tcp, port number 3300 ... Info: R3GATEWAYPORT_IND_IND IaServicePortAppend 2 1114 Port name sapgw00 is known and the port number 3300 is equal to the existing port number 3300 Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 PISTARTBSP Info: PISTARTBSP SyDirCreate 2 1 Checking existence of directory C:\Users\Karthikeyan\Desktop\. If it does not exist creating it with user , group and permission 0 ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 PISTARTBSPGROUP Info: PISTARTBSPGROUP SyDirCreate 2 1 Checking existence of directory C:\Users\Karthikeyan\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Mini SAP Web Application Server. If it does not exist creating it with user , group and permission 0 ...

  Read the article

• Installation of SAP Web Application Server 6.20 in Windows Vista

  - by karthikeyan b

  I tried installing trial version of sap netweaver 7.1 in windows vista in my laptop but i couldnt succeed there.. then i tried installing SAP WEB AS 6.20 now.I am able to succeed till 91% completion.After that i get some errors and the installation stops... if anybody have any experiences please share.it will be really helpful.I mentioned the complete log details below. nfo: INSTGUI.EXE Protocol version is 10. Message checksum is 7613888. Info: INSTGUI MessageFile Start message loading... Info: INSTGUI MessageFile Finished message loading. Info: InstController Prepare {} {} R3SETUP Version: Apr 24 2002 Info: InstController Prepare {} {} Logfile will be set to E:\R3SETUP\BSP.log Check E:\R3SETUP\BSP.log for further messages. Info: CommandFileController SyFileVersionSave {} {} Saving original content of file E:\R3SETUP\BSP.R3S ... Warning: CommandFileController SyFileCopy {} {} Function CopyFile() failed at location SyFileCopy-681 Warning: CommandFileController SyFileCopy {} {} errno: 5: Access is denied. Warning: CommandFileController SyFileCreateWithPermissions {} {} errno: 13: Permission denied Warning: CommandFileController SyPermissionSet {} {} Function SetNamedSecurityInfo() failed for E:\R3SETUP\BSP.R3S at location SyPermissionSet-2484 Warning: CommandFileController SyPermissionSet {} {} errno: 5: Access is denied. Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD KERNEL will not be copied. Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD DATA1 will not be copied. Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD DATA2 will not be copied. Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Warning: ADADBINSTANCE_IND_ADA GetConfirmationFor 2 58 Cleanup database instance BSP for new installation. Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 54 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 54 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1146 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1146 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 718 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 718 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD KERNEL will not be copied. Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD DATA1 will not be copied. Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD DATA2 will not be copied. Info: InstController MakeStepsDeliver 2 309 Requesting Information on CD-ROMs Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Info: CENTRDBINSTANCE_NT_ADA InternalWarmKeyCheck 2 333 The installation phase is starting now. Please look in the log file for further information about current actions. Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 99 Defining Key Values Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 58 Requesting Setup Details Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1206 Setting Users for Single DB landscape Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 75 Stopping the SAP DB Instance Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 247 Stopping the SAP DB remote server Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 1195 Can not read from Z:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: SAPDBSETCDPATH_IND_IND and key: KERNEL_LOCATION Info: InstController MakeStepsDeliver 2 1195 Installing SAP DB Software Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1195 Installing SAP DB Software Info: SAPDBINSTALL_IND_ADA SyCoprocessCreate 2 1195 Creating coprocess E:\sapdb\NT\I386\sdbinst.exe ... Info: SAPDBINSTALL_IND_ADA ExecuteDo 2 1195 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 120 Extracting SAP DB Tools Software Info: ADAEXTRACTLCTOOLS_NT_ADA SyCoprocessCreate 2 120 Creating coprocess SAPCAR ... Info: ADAEXTRACTLCTOOLS_NT_ADA SyCoprocessCreate 2 120 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: ADAEXTRACTBSPCFG SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: ADAEXTRACTBSPCFG SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 242 Starting VSERVER Info: ADAXSERVER_NT_ADA SyCoprocessCreate 2 242 Creating coprocess C:\sapdb\programs\bin\x_server.exe ... Info: ADAXSERVER_NT_ADA ExecuteDo 2 242 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA1 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA1 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 816 Can not read from Y:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXEDBDATA2 and key: DATA1_LOCATION Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA2 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA2 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 816 Can not read from X:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXEDBDATA3 and key: DATA2_LOCATION Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA3 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA3 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 815 We tried to find the label SAPDB:MINI-WAS-DEMO:620:KERNEL for CD KERNEL in path E:. But the check was not successfull. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXE and key: KERNEL_LOCATION Info: InstController MakeStepsDeliver 2 815 Extracting the SAP Executables Info: EXTRACTSAPEXE SyCoprocessCreate 2 815 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXE SyCoprocessCreate 2 815 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 223 Setting new Rundirectory. Info: ADADBREGISTER_IND_ADA SyCoprocessCreate 2 223 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADADBREGISTER_IND_ADA ExecuteDo 2 223 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 ADASETDEVSPACES_IND_ADA Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 10 Performing Service BCHECK Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_DEFAULT_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_DEFAULT_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_COLD_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_COLD_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_WARM_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_WARM_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 760 Creating the Default Profile Info: DEFAULTPROFILE_IND_IND SyFileVersionSave 2 760 Saving original content of file C:\MiniWAS\DEFAULT.PFL ... Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1267 Modifying or Creating the TPPARAM File Info: TPPARAMMODIFY_NT_ADA SyFileVersionSave 2 1267 Saving original content of file C:\MiniWAS\trans\bin\TPPARAM ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1111 Creating the Service Entry for the Dispatcher Info: R3DISPATCHERPORT_IND_IND IaServicePortAppend 2 1111 Checking service name sapdp00, protocol tcp, port number 3200 ... Info: R3DISPATCHERPORT_IND_IND IaServicePortAppend 2 1111 Port name sapdp00 is known and the port number 3200 is equal to the existing port number 3200 Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1122 Creating the Service Entry for the Message Server Info: R3MESSAGEPORT_IND_IND IaServicePortAppend 2 1122 Checking service name sapmsBSP, protocol tcp, port number 3600 ... Info: R3MESSAGEPORT_IND_IND IaServicePortAppend 2 1122 Port name sapmsBSP is known and the port number 3600 is equal to the existing port number 3600 Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1114 Creating the Service Entry for the Gateway Service Info: R3GATEWAYPORT_IND_IND IaServicePortAppend 2 1114 Checking service name sapgw00, protocol tcp, port number 3300 ... Info: R3GATEWAYPORT_IND_IND IaServicePortAppend 2 1114 Port name sapgw00 is known and the port number 3300 is equal to the existing port number 3300 Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 PISTARTBSP Info: PISTARTBSP SyDirCreate 2 1 Checking existence of directory C:\Users\Karthikeyan\Desktop. If it does not exist creating it with user , group and permission 0 ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 PISTARTBSPGROUP Info: PISTARTBSPGROUP SyDirCreate 2 1 Checking existence of directory C:\Users\Karthikeyan\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Mini SAP Web Application Server. If it does not exist creating it with user , group and permission 0 ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 54 Starting SAP DB to Mode WARM Error: Command

  Read the article

• Joining Windows 7 Professional to a Windows Server 2003 R2 x64 domain fails.

  - by Vinko Vrsalovic

  I have a windows 7 professional (spanish) laptop trying to join a Windows Server 2003 (english) domain. It detect correctly the SRV record, finding the proper domain controller, but then the join fails with the error message (snippet, because the error is in spanish) An Active Directory Domain Controller for This Domain Could Not be Contacted The DNS is correctly set, and client can ping by name and IP the server, the server can ping the client by IP. I've tested with the FW down to no avail. A host of other XP Pro clients are connected to the domain. I've restarted Net Logon and checked that Windows Time is up. Also the times are in sync between the server and the client. I'll put below diagnostics output. I'm wondering if there's anything special to be done on either the server or the client to have a Win 7 Pro join a 2k3 R2 domain. The following diagnostic information follows: netdiag /q for the DC dcdiag on the DC ipconfig /all on the Win 7 client netdiag /q on the DC: .................................. Computer Name: HI-X2 DNS Host Name: hi-x2.hi.local System info : Microsoft Windows Server 2003 R2 (Build 3790) Processor : EM64T Family 6 Model 23 Stepping 10, GenuineIntel List of installed hotfixes : KB923561 KB924667-v2 KB925398_WMP64 KB925902 KB926122 KB927891 KB929123 KB930178 KB932168 KB936357 KB938127 KB941569 KB942830 KB942831 KB943055 KB943460 KB944338-v2 KB944653 KB945553 KB946026 KB948496 KB950760 KB950762 KB950974 KB951066 KB951748 KB952004 KB952069 KB952954 KB954155 KB954550-v7 KB955069 KB955759 KB956572 KB956802 KB956803 KB956844 KB958469 KB958644 KB958869 KB959426 KB960225 KB960803 KB960859 KB961063 KB961118 KB961501 KB967715 KB967723 KB968389 KB968816 KB969059 KB969947 KB970238 KB970430 KB970483 KB971032 KB971468 KB971657 KB971737 KB971961 KB971961-IE8 KB972270 KB973037 KB973354 KB973507 KB973540 KB973687 KB973815 KB973825 KB973869 KB973904 KB973917-v2 KB974112 KB974318 KB974392 KB974571 KB975025 KB975467 KB975560 KB975713 KB976662-IE8 KB977290 KB977816 KB977914 KB978037 KB978262 KB978338 KB978542 KB978601 KB978706 KB979306 KB979309 KB979683 KB980182 KB980182-IE8 KB980232 KB980302-IE8 KB981332-IE8 KB981350 Q147222 Per interface results: Adapter : Local Area Connection Host Name. . . . . . . . . : hi-x2.hi.local IP Address . . . . . . . . : 10.0.1.199 Subnet Mask. . . . . . . . : 255.0.0.0 Default Gateway. . . . . . : 10.0.1.1 Dns Servers. . . . . . . . : 10.0.1.199 WINS service test. . . . . : Skipped Global results: [WARNING] You don't have a single interface with the 'WorkStation Service', 'Messenger Service', 'WINS' names defined. DNS test . . . . . . . . . . . . . : Passed PASS - All the DNS entries for DC are registered on DNS server '10.0.1.199'. IP Security test . . . . . . . . . : Skipped The command completed successfully dcdiag on the DC: Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\HI-X2 Starting test: Connectivity ......................... HI-X2 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\HI-X2 Starting test: Replications ......................... HI-X2 passed test Replications Starting test: NCSecDesc ......................... HI-X2 passed test NCSecDesc Starting test: NetLogons ......................... HI-X2 passed test NetLogons Starting test: Advertising ......................... HI-X2 passed test Advertising Starting test: KnowsOfRoleHolders ......................... HI-X2 passed test KnowsOfRoleHolders Starting test: RidManager ......................... HI-X2 passed test RidManager Starting test: MachineAccount ......................... HI-X2 passed test MachineAccount Starting test: Services ......................... HI-X2 passed test Services Starting test: ObjectsReplicated ......................... HI-X2 passed test ObjectsReplicated Starting test: frssysvol ......................... HI-X2 passed test frssysvol Starting test: frsevent ......................... HI-X2 passed test frsevent Starting test: kccevent ......................... HI-X2 passed test kccevent Starting test: systemlog ......................... HI-X2 passed test systemlog Starting test: VerifyReferences ......................... HI-X2 passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : hi Starting test: CrossRefValidation ......................... hi passed test CrossRefValidation Starting test: CheckSDRefDom ......................... hi passed test CheckSDRefDom Running enterprise tests on : hi.local Starting test: Intersite ......................... hi.local passed test Intersite Starting test: FsmoCheck ......................... hi.local passed test FsmoCheck ipconfig /all on the Windows 7 client: Configuraci¢n IP de Windows Nombre de host. . . . . . . . . : hi-p6 Sufijo DNS principal . . . . . : Tipo de nodo. . . . . . . . . . : h¡brido Enrutamiento IP habilitado. . . : no Proxy WINS habilitado . . . . . : no Adaptador de LAN inal mbrica Conexi¢n de red inal mbrica: Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN Direcci¢n f¡sica. . . . . . . . . . . . . : 00-22-FB-63-47-A0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Direcci¢n IPv4. . . . . . . . . . . . . . : 10.0.1.42(Preferido) M scara de subred . . . . . . . . . . . . : 255.255.255.0 Puerta de enlace predeterminada . . . . . : 10.0.1.1 Servidores DNS. . . . . . . . . . . . . . : 10.0.1.199 NetBIOS sobre TCP/IP. . . . . . . . . . . : habilitado Adaptador de Ethernet Conexi¢n de  rea local: Estado de los medios. . . . . . . . . . . : medios desconectados Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Realtek PCIe GBE Family Controller Direcci¢n f¡sica. . . . . . . . . . . . . : 00-1E-33-1F-35-B1 DHCP habilitado . . . . . . . . . . . . . : s¡ Configuraci¢n autom tica habilitada . . . : s¡ Adaptador de t£nel isatap.{8926581E-09AC-4123-906B-DA6386AD2D60}: Estado de los medios. . . . . . . . . . . : medios desconectados Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Adaptador ISATAP de Microsoft Direcci¢n f¡sica. . . . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Adaptador de t£nel Teredo Tunneling Pseudo-Interface: Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Direcci¢n f¡sica. . . . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Direcci¢n IPv6 . . . . . . . . . . : 2001:0:5ef5:73ba:1cec:3883:f5ff:fed5(Preferido) V¡nculo: direcci¢n IPv6 local. . . : fe80::1cec:3883:f5ff:fed5%13(Preferido) Puerta de enlace predeterminada . . . . . : :: NetBIOS sobre TCP/IP. . . . . . . . . . . : deshabilitado

  Read the article

• Installation of SAP Web Application Server 6.20 in Windows Vista

  - by karthikeyan b

  I tried installing trial version of sap netweaver 7.1 in windows vista in my laptop but i couldnt succeed there.. then i tried installing SAP WEB AS 6.20 now.I am able to succeed till 91% completion.After that i get some errors and the installation stops... if anybody have any experiences please share.it will be really helpful.I mentioned the complete log details below. nfo: INSTGUI.EXE Protocol version is 10. Message checksum is 7613888. Info: INSTGUI MessageFile Start message loading... Info: INSTGUI MessageFile Finished message loading. Info: InstController Prepare {} {} R3SETUP Version: Apr 24 2002 Info: InstController Prepare {} {} Logfile will be set to E:\R3SETUP\BSP.log Check E:\R3SETUP\BSP.log for further messages. Info: CommandFileController SyFileVersionSave {} {} Saving original content of file E:\R3SETUP\BSP.R3S ... Warning: CommandFileController SyFileCopy {} {} Function CopyFile() failed at location SyFileCopy-681 Warning: CommandFileController SyFileCopy {} {} errno: 5: Access is denied. Warning: CommandFileController SyFileCreateWithPermissions {} {} errno: 13: Permission denied Warning: CommandFileController SyPermissionSet {} {} Function SetNamedSecurityInfo() failed for E:\R3SETUP\BSP.R3S at location SyPermissionSet-2484 Warning: CommandFileController SyPermissionSet {} {} errno: 5: Access is denied. Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD KERNEL will not be copied. Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD DATA1 will not be copied. Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD DATA2 will not be copied. Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Warning: ADADBINSTANCE_IND_ADA GetConfirmationFor 2 58 Cleanup database instance BSP for new installation. Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 54 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 54 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1146 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1146 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 718 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 718 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD KERNEL will not be copied. Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD DATA1 will not be copied. Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD DATA2 will not be copied. Info: InstController MakeStepsDeliver 2 309 Requesting Information on CD-ROMs Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Info: CENTRDBINSTANCE_NT_ADA InternalWarmKeyCheck 2 333 The installation phase is starting now. Please look in the log file for further information about current actions. Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 99 Defining Key Values Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 58 Requesting Setup Details Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1206 Setting Users for Single DB landscape Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 75 Stopping the SAP DB Instance Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 247 Stopping the SAP DB remote server Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 1195 Can not read from Z:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: SAPDBSETCDPATH_IND_IND and key: KERNEL_LOCATION Info: InstController MakeStepsDeliver 2 1195 Installing SAP DB Software Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1195 Installing SAP DB Software Info: SAPDBINSTALL_IND_ADA SyCoprocessCreate 2 1195 Creating coprocess E:\sapdb\NT\I386\sdbinst.exe ... Info: SAPDBINSTALL_IND_ADA ExecuteDo 2 1195 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 120 Extracting SAP DB Tools Software Info: ADAEXTRACTLCTOOLS_NT_ADA SyCoprocessCreate 2 120 Creating coprocess SAPCAR ... Info: ADAEXTRACTLCTOOLS_NT_ADA SyCoprocessCreate 2 120 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: ADAEXTRACTBSPCFG SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: ADAEXTRACTBSPCFG SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 242 Starting VSERVER Info: ADAXSERVER_NT_ADA SyCoprocessCreate 2 242 Creating coprocess C:\sapdb\programs\bin\x_server.exe ... Info: ADAXSERVER_NT_ADA ExecuteDo 2 242 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA1 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA1 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 816 Can not read from Y:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXEDBDATA2 and key: DATA1_LOCATION Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA2 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA2 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 816 Can not read from X:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXEDBDATA3 and key: DATA2_LOCATION Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA3 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA3 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 815 We tried to find the label SAPDB:MINI-WAS-DEMO:620:KERNEL for CD KERNEL in path E:. But the check was not successfull. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXE and key: KERNEL_LOCATION Info: InstController MakeStepsDeliver 2 815 Extracting the SAP Executables Info: EXTRACTSAPEXE SyCoprocessCreate 2 815 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXE SyCoprocessCreate 2 815 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 223 Setting new Rundirectory. Info: ADADBREGISTER_IND_ADA SyCoprocessCreate 2 223 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADADBREGISTER_IND_ADA ExecuteDo 2 223 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 ADASETDEVSPACES_IND_ADA Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 10 Performing Service BCHECK Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_DEFAULT_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_DEFAULT_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_COLD_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_COLD_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_WARM_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_WARM_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 760 Creating the Default Profile Info: DEFAULTPROFILE_IND_IND SyFileVersionSave 2 760 Saving original content of file C:\MiniWAS\DEFAULT.PFL ... Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1267 Modifying or Creating the TPPARAM File Info: TPPARAMMODIFY_NT_ADA SyFileVersionSave 2 1267 Saving original content of file C:\MiniWAS\trans\bin\TPPARAM ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1111 Creating the Service Entry for the Dispatcher Info: R3DISPATCHERPORT_IND_IND IaServicePortAppend 2 1111 Checking service name sapdp00, protocol tcp, port number 3200 ... Info: R3DISPATCHERPORT_IND_IND IaServicePortAppend 2 1111 Port name sapdp00 is known and the port number 3200 is equal to the existing port number 3200 Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1122 Creating the Service Entry for the Message Server Info: R3MESSAGEPORT_IND_IND IaServicePortAppend 2 1122 Checking service name sapmsBSP, protocol tcp, port number 3600 ... Info: R3MESSAGEPORT_IND_IND IaServicePortAppend 2 1122 Port name sapmsBSP is known and the port number 3600 is equal to the existing port number 3600 Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1114 Creating the Service Entry for the Gateway Service Info: R3GATEWAYPORT_IND_IND IaServicePortAppend 2 1114 Checking service name sapgw00, protocol tcp, port number 3300 ... Info: R3GATEWAYPORT_IND_IND IaServicePortAppend 2 1114 Port name sapgw00 is known and the port number 3300 is equal to the existing port number 3300 Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 PISTARTBSP Info: PISTARTBSP SyDirCreate 2 1 Checking existence of directory C:\Users\Karthikeyan\Desktop. If it does not exist creating it with user , group and permission 0 ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 PISTARTBSPGROUP Info: PISTARTBSPGROUP SyDirCreate 2 1 Checking existence of directory C:\Users\Karthikeyan\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Mini SAP Web Application Server. If it does not exist creating it with user , group and permission 0 ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 54 Starting SAP DB to Mode WARM Error: Command

  Read the article

< Previous Page | 111 112 113 114 115