Search Results

Search found 3367 results on 135 pages for 'alpha five'.

Page 116/135 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• Your Next IT Job

  - by BuckWoody

  Some data professionals have worked (and plan to work) in the same place for a long time. In organizations large and small, the turnover rate just isn’t that high. This has not been my experience. About every 3-5 years I’ve changed either roles or companies. That might be due to the IT environment or my personality (or a mix of the two), but the point is that I’ve had many roles and worked for many companies large and small throughout my 27+ years in IT. At one point this might have been a detriment – a prospective employer looks at the resume and says “it seems you’ve moved around quite a bit.” But I haven’t found that to be the case all the time –in fact, in some cases the variety of jobs I’ve held has been an asset because I’ve seen what works (and doesn’t) in other environments, which can save time and money. So if you’re in the first camp – great! Stay where you are, and continue doing the work you love. but if you’re in the second, then this post might be useful. If you are planning on making a change, or perhaps you’ve hit a wall at your current location, you might start looking around for a better paying job – and there’s nothing wrong with that. We all try to make our lives better, and for some that involves more money. Money, however, isn’t always the primary motivator. I’ve gone to another job that doesn’t have as many benefits or has the same salary as the current job I’m working to gain more experience, get a better work/life balance and so on. It’s a mix of factors that only you know about. So I thought I would lay out a few advantages and disadvantages in the shops I’ve worked at. This post isn’t aimed at a single employer, but represents a mix of what I’ve experienced, and of course the opinions here are my own. You will most certainly have a different take – if so, please post a response! I also won’t mention a specific industry – I’ve worked everywhere from medical firms, legal offices, retail, billing centers, manufacturing, government, even to NASA. I’m focusing here mostly on size and composition. And I’m making some very broad generalizations here – I am fully aware that a small company might have great benefits and a large company might allow a lot of role flexibility.  your mileage may vary – and again, post those comments! Small Company To me a “small company” means around 100 people or less – sometimes a lot less. These can be really fun, frustrating places to to work. Advantages: a great deal of flexibility, a wide range of roles (often at the same time), a large degree of responsibility, immediate feedback, close relationships with co-workers, work directly with your customer. Disadvantages: Too much responsibility, little work/life balance, immature political structure, few (if any) benefits. If the business is family-owned, they can easily violate work/life boundaries. Medium Size company In my experience the next size company I would work for involves from a few hundred people to around five thousand. Advantages: Good mobility – fairly easy to get promoted, acceptable benefits, more defined responsibilities, better work/life balance, balanced load for expertise, but still the organizational structure is fairly simple to understand. Disadvantages: Pay is not always highest, rapid changes in structure as the organization grows, transient workforce. You may not be given the opportunity to work with another technology if someone already “owns” it. Politics are painful at this level as people try to learn how to do it. Large Company When you get into the tens of thousands of folks employed around the world, you’re in a large company. Advantages: Lots of room to move around – sometimes you can work (as I have) multiple jobs through the years and yet stay at the same company, building time for benefits, very defined roles, trained managers (yes, I know some of them are still awful – trust me – I DO know that), higher-end benefits, long careers possible, discounts at retailers and other “soft” benefits, prestige. For some, a higher level of politics (done professionally) is a good thing. Disadvantages: You could become another faceless name in the crowd, might not allow a great deal of flexibility,  large organizational changes might take away any control you have of your career. I’ve also seen large layoffs happen, and good people get let go while “dead weight” is retained. For some, a higher level of politics is distasteful. So what are your experiences? Share with the group! Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Content Query Web Part and the Yes/No Field

  - by Bil Simser

  The Content Query Web Part (CQWP) is a pretty powerful beast. It allows you to do multiple site queries and aggregate the results. This is great for rolling up content and doing some summary type reporting. Here’s a trick to remember about Yes/No fields and using the CQWP. If you’re building a news style site and want to aggregate say all the announcements that people tag a certain way, up onto the home page this might be a solution. First we need to allow a way for users of all our sites to mark an announcement for inclusion on our Intranet Home Page. We’ll do this by just modifying the Announcement Content type and adding a Yes/No field to it. There are alternate ways of doing this like building a new Announcement type or stapling a feature to all sites to add our column but this is pretty low impact and only affects our current site collection so let’s go with it for now, okay? You can berate me in the comments about the proper way I should have done this part. Go to the Site Settings for the Site Collection and click on Site Content Types under the Galleries. This takes you to the gallery for this site and all subsites. Scroll down until you see the List Content Types and click on Announcements. Now we’re modifying the Announcement content type which affects all those announcement lists that are created by default if you’re building sites using the Team Site template (or creating a new Announcements list on any site for that matter). Click on Add from new site column under the Column list. This will allow us to create a new Yes/No field that users will see in Announcement items. This field will allow the user to flag the announcement for inclusion on the home page. Feel free to modify the fields as you see fit for your environment, this is just an example. Now that we’ve added the column to our Announcements Content type we can go into any site that has an announcement list, modify that announcement and flag it to be included on our home page. See the new Featured column? That was the result of modifying our Announcements Content Type on this site collection. Now we can move onto the dirty part, displaying it in a CQWP on the home page. And here is where the fun begins (and the head scratching should end). On our home page we want to drop a Content Query Web Part and aggregate any Announcement that’s been flagged as Featured by the users (we could also add the filter to handle Expires so we don’t show old content so go ahead and do that if you want). First add a CQWP to the page then modify the settings for the web part. In the first section, Query, we want the List Type to be set to Announcements and the Content type to be Announcement so set your options like this: Click Apply and you’ll see the results display all Announcements from any site in the site collection. I have five team sites created each with a unique announcement added to them. Now comes the filtering. We don’t want to include every announcement, only ones users flag using that Featured column we added. At first blush you might scroll down to the Additional Filters part of the Query options and set the Featured column to be equal to Yes: This seems correct doesn’t it? After all, the column is a Yes/No column and looking at an announcement in the site, it displays the field as Yes or No: However after applying the filter you get this result: (I have the announcements from Team Site 1 and Team Site 4 flagged as Featured) Huh? It’s BACKWARDS! Let’s confirm that. Go back in and change the Additional Filters section from Yes to No and hit Apply and you get this: Wait a minute? Shouldn’t I see Team Site 1 and 4 if the logic is backwards? Why am I seeing the same thing as before. What gives… For whatever reason, unknown to me, a Yes/No field (even though it displays as such) really uses 1 and 0 behind the scenes. Yeah, someone was stuck on using integer values for booleans when they wrote SharePoint (probably after a long night of white boarding ways to mess with developers heads) and came up with this. The solution is pretty simple but not very discoverable. Set the filter to include your flagged items like so: And it will filter the items marked as Featured correctly giving you this result: This kind of solution could also be extended and enhanced. Here are a few suggestions and ideas: Modify the ItemStyle.xsl file to add a new style for this aggregation which would include the first few paragraphs of the body (or perhaps add another field to the Content type called Excerpt or Summary and display that instead) Add an Image column to the Announcement Content type to include a Picture field and display it in the summary Add a Category choice field (Employee News, Current Events, Headlines, etc.) and add multiple CQWPs to the home page filtering each one on a different category I know some may find this topic old and dusty but I didn’t see a lot out there specifically on filtering the Yes/No fields and the whole 1/0 trick was a little wonky, so I figured a few pictures would help walk through overcoming yet another SharePoint weirdness. With a little work and some creative juices you can easily us the power of aggregation and the CQWP to build a news site from content on your team sites.

  Read the article

• Lighting get darker when texture is aplied

  - by noah

  Im using OpenGL ES 1.1 for iPhone. I'm attempting to implement a skybox in my 3d world and started out by following one of Jeff Lamarches tutorials on creating textures. Heres the tutorial: iphonedevelopment.blogspot.com/2009/05/opengl-es-from-ground-up-part-6_25.html Ive successfully added the image to my 3d world but am not sure why the lighting on the other shapes has changed so much. I want the shapes to be the original color and have the image in the background. Before: https://www.dropbox.com/s/ojmb8793vj514h0/Screen%20Shot%202012-10-01%20at%205.34.44%20PM.png After: https://www.dropbox.com/s/8v6yvur8amgudia/Screen%20Shot%202012-10-01%20at%205.35.31%20PM.png Heres the init OpenGL: - (void)initOpenGLES1 { glShadeModel(GL_SMOOTH); // Enable lighting glEnable(GL_LIGHTING); // Turn the first light on glEnable(GL_LIGHT0); const GLfloat lightAmbient[] = {0.2, 0.2, 0.2, 1.0}; const GLfloat lightDiffuse[] = {0.8, 0.8, 0.8, 1.0}; const GLfloat matAmbient[] = {0.3, 0.3, 0.3, 0.5}; const GLfloat matDiffuse[] = {1.0, 1.0, 1.0, 1.0}; const GLfloat matSpecular[] = {1.0, 1.0, 1.0, 1.0}; const GLfloat lightPosition[] = {0.0, 0.0, 1.0, 0.0}; const GLfloat lightShininess = 100.0; //Configure OpenGL lighting glEnable(GL_LIGHTING); glEnable(GL_LIGHT0); glMaterialfv(GL_FRONT_AND_BACK, GL_AMBIENT, matAmbient); glMaterialfv(GL_FRONT_AND_BACK, GL_DIFFUSE, matDiffuse); glMaterialfv(GL_FRONT_AND_BACK, GL_SPECULAR, matSpecular); glMaterialf(GL_FRONT_AND_BACK, GL_SHININESS, lightShininess); glLightfv(GL_LIGHT0, GL_AMBIENT, lightAmbient); glLightfv(GL_LIGHT0, GL_DIFFUSE, lightDiffuse); glLightfv(GL_LIGHT0, GL_POSITION, lightPosition); // Define a cutoff angle glLightf(GL_LIGHT0, GL_SPOT_CUTOFF, 40.0); // Set the clear color glClearColor(0, 0, 0, 1.0f); // Projection Matrix config glMatrixMode(GL_PROJECTION); glLoadIdentity(); CGSize layerSize = self.view.layer.frame.size; // Swapped height and width for landscape mode gluPerspective(45.0f, (GLfloat)layerSize.height / (GLfloat)layerSize.width, 0.1f, 750.0f); [self initSkyBox]; // Modelview Matrix config glMatrixMode(GL_MODELVIEW); glLoadIdentity(); // This next line is not really needed as it is the default for OpenGL ES glTexEnvi(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE); glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); glDisable(GL_BLEND); // Enable depth testing glEnable(GL_DEPTH_TEST); glDepthFunc(GL_LESS); glDepthMask(GL_TRUE); } Heres the drawSkybox that gets called in the drawFrame method: -(void)drawSkyBox { glDisable(GL_LIGHTING); glDisable(GL_DEPTH_TEST); glEnableClientState(GL_VERTEX_ARRAY); glEnableClientState(GL_NORMAL_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); static const SSVertex3D vertices[] = { {-1.0, 1.0, -0.0}, { 1.0, 1.0, -0.0}, {-1.0, -1.0, -0.0}, { 1.0, -1.0, -0.0} }; static const SSVertex3D normals[] = { {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0} }; static const GLfloat texCoords[] = { 0.0, 0.5, 0.5, 0.5, 0.0, 0.0, 0.5, 0.0 }; glLoadIdentity(); glTranslatef(0.0, 0.0, -3.0); glBindTexture(GL_TEXTURE_2D, texture[0]); glVertexPointer(3, GL_FLOAT, 0, vertices); glNormalPointer(GL_FLOAT, 0, normals); glTexCoordPointer(2, GL_FLOAT, 0, texCoords); glDrawArrays(GL_TRIANGLE_STRIP, 0, 4); glDisableClientState(GL_VERTEX_ARRAY); glDisableClientState(GL_NORMAL_ARRAY); glDisableClientState(GL_TEXTURE_COORD_ARRAY); glEnable(GL_LIGHTING); glEnable(GL_DEPTH_TEST); } Heres the init Skybox: -(void)initSkyBox { // Turn necessary features on glEnable(GL_TEXTURE_2D); glEnable(GL_BLEND); glBlendFunc(GL_ONE, GL_SRC_COLOR); // Bind the number of textures we need, in this case one. glGenTextures(1, &texture[0]); // create a texture obj, give unique ID glBindTexture(GL_TEXTURE_2D, texture[0]); // load our new texture name into the current texture glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR); NSString *path = [[NSBundle mainBundle] pathForResource:@"space" ofType:@"jpg"]; NSData *texData = [[NSData alloc] initWithContentsOfFile:path]; UIImage *image = [[UIImage alloc] initWithData:texData]; GLuint width = CGImageGetWidth(image.CGImage); GLuint height = CGImageGetHeight(image.CGImage); CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); void *imageData = malloc( height * width * 4 ); // times 4 because will write one byte for rgb and alpha CGContextRef cgContext = CGBitmapContextCreate( imageData, width, height, 8, 4 * width, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big ); // Flip the Y-axis CGContextTranslateCTM (cgContext, 0, height); CGContextScaleCTM (cgContext, 1.0, -1.0); CGColorSpaceRelease( colorSpace ); CGContextClearRect( cgContext, CGRectMake( 0, 0, width, height ) ); CGContextDrawImage( cgContext, CGRectMake( 0, 0, width, height ), image.CGImage ); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, width, height, 0, GL_RGBA, GL_UNSIGNED_BYTE, imageData); CGContextRelease(cgContext); free(imageData); [image release]; [texData release]; } Any help is greatly appreciated.

  Read the article

• How do I resolve this exercise on C++? [closed]

  - by user40630

  (Card Shuffling and Dealing) Create a program to shuffle and deal a deck of cards. The program should consist of class Card, class DeckOfCards and a driver program. Class Card should provide: a) Data members face and suit of type int. b) A constructor that receives two ints representing the face and suit and uses them to initialize the data members. c) Two static arrays of strings representing the faces and suits. d) A toString function that returns the Card as a string in the form “face of suit.” You can use the + operator to concatenate strings. Class DeckOfCards should contain: a) A vector of Cards named deck to store the Cards. b) An integer currentCard representing the next card to deal. c) A default constructor that initializes the Cards in the deck. The constructor should use vector function push_back to add each Card to the end of the vector after the Card is created and initialized. This should be done for each of the 52 Cards in the deck. d) A shuffle function that shuffles the Cards in the deck. The shuffle algorithm should iterate through the vector of Cards. For each Card, randomly select another Card in the deck and swap the two Cards. e) A dealCard function that returns the next Card object from the deck. f) A moreCards function that returns a bool value indicating whether there are more Cards to deal. The driver program should create a DeckOfCards object, shuffle the cards, then deal the 52 cards. This above is the exercise I'm trying to solve. I'd be very much appreciated if someone could solve it and explain it to me. The main idea of the program is quite simple. What I don't get is how to build the constructor for the class DeckOfCards and how to generate the 52 cards of the deck with different suits and faces. Untill now I've managed to do this: #include <iostream> #include <vector> using namespace std; /* * */ /* a) Data members face and suit of type int. b) A constructor that receives two ints representing the face and suit and uses them to initialize the data members. c) Two static arrays of strings representing the faces and suits. d) A toString function that returns the Card as a string in the form “face of suit.” You can use the + operator to concatenate strings. */ class Card { public: Card(int, int); string toString(); private: int suit, face; static string faceNames[13]; static string suitNames[4]; }; string Card::faceNames[13] = {"Ace","Two","Three","Four","Five","Six","Seven","Eight","Nine","Ten","Queen","Jack","King"}; string Card::suitNames[4] = {"Diamonds","Clubs","Hearts","Spades"}; string Card::toString() { return faceNames[face]+" of "+suitNames[suit]; } Card::Card(int f, int s) :face(f), suit(s) { } /* Class DeckOfCards should contain: a) A vector of Cards named deck to store the Cards. b) An integer currentCard representing the next card to deal. c) A default constructor that initializes the Cards in the deck. The constructor should use vector function push_back to add each Card to the end of the vector after the Card is created and initialized. This should be done for each of the 52 Cards in the deck. d) A shuffle function that shuffles the Cards in the deck. The shuffle algorithm should iterate through the vector of Cards. For each Card, randomly select another Card in the deck and swap the two Cards. e) A dealCard function that returns the next Card object from the deck. f) A moreCards function that returns a bool value indicating whether there are more Cards to deal. */ class DeckOfCards { public: DeckOfCards(); void shuffleCards(); Card dealCard(); bool moreCards(); private: vector<Card> deck(52); int currentCard; }; int main(int argc, char** argv) { return 0; } DeckOfCards::DeckOfCards() { //I'm stuck here I have no idea of what to take out of here. //I still don't fully get the idea of class inside class and that's turning out as a problem. I try to find a way to set the suits and faces members of the class Card but I can't figure out how. for(int i=0; i<deck.size(); i++) { deck[i]//....There is no function to set them. They must be set when initialized. But how?? } } For easier reading: http://pastebin.com/pJeXMH0f

  Read the article

• Oracle GoldenGate 12c - Leading Enterprise Replication

  - by Doug Reid

  Oracle GoldenGate 12c released  on October 17th and includes several new cutting edge features that firmly establishes GoldenGate's leader position in the data replication space.   In fact, this release more than doubles the performance of data delivery, supports Oracle's new multitenant database feature,  it's more secure, has more options for high availability, and has made great strides to simplify the configuration and deployment of the product.     Read through the press release if you haven't already and do not miss the quote from Cern's Eva Dafonte Perez, regarding Oracle GoldenGate 12c "….performs five times faster compared to previous GoldenGate versions and simplifies the management of a multi-tier environment" There are a variety of new and improved features in the Oracle GoldenGate 12c.  Here are the highlights: Optimized for Oracle Database 12c -  GoldenGate 12c is custom tailored to the unique capabilities of Oracle database 12c and out of the box GoldenGate 12c supports multitenant (pluggable database (PDB)) and non-consolidated deployments of Oracle Database 12c.   The naming convention used by database 12c is now in three parts (PDB-name, schema-name, and object name).  We have made changes to the GoldenGate capture process to support the new naming convention and streamlined the whole process so a single GoldenGate capture process is being used at the container level rather than at each individual PDB.  By having the capture process at the container level resource usage and the number of processes are reduced. To view a conceptual architecture diagram click here. Integrated Delivery for the Oracle Database - Leveraging a lightweight streaming API built exclusively for Oracle GoldenGate 12c, this process distributes load, auto tunes the degree of parallelism, scales better, and delivers blinding rates of changed data delivery to the Oracle database.  One of the goals for Oracle GoldenGate 12c was to reduce IT costs by simplifying the configuration and reduce the time to manage complex infrastructures.  In previous versions of Oracle GoldenGate, customers would split transaction loads by grouping tables into multiple different delivery processes (click here to view the previous method). Each delivery process executed independently and without any interaction or knowledge of other delivery processes.  This setup was complicated to configure and time consuming as the developer needed in-depth knowledge of the source and target schemas and the transaction profile. With GoldenGate 12c and Integrated Delivery we have made it easier to configure and faster to deploy.  To view a conceptual architecture diagram of integrated delivery click here Coordinated Delivery for Non-Oracle Databases - Coordinated Delivery orchestrates high-speed apply processes and simplifies the configuration of GoldenGate for non-Oracle targets. In Oracle GoldenGate 12c a single delivery process is used with multiple threads (click here) and key events, such as primary key updates, event markers, DDL, etc, are coordinated between the various threads to insure that the transactions are applied in the same sequence as they were captured, all while delivery improved performance.  Replication Between On-Premises and Cloud-Based systems. - The trend for business to utilize both on-premises and cloud-based systems is rising and businesses need to replicate data back and forth.   GoldenGate 12c can be configured in a variety of ways to provide real-time replication when unrestricted or restricted (limited ports or HTTP tunneling) networks are between on-premises and cloud-based systems.    Expanded Heterogeneity - It wouldn't be a GoldenGate release without new and improved platform support.   Release 1 includes support for MySQL 5.6 and Sybase 15.7.   Upcoming in the next release GoldenGate, support will be expanded for MS SQL Server, DB2, and Teradata. Tighter Security - Oracle GoldenGate 12c is integrated with the Oracle wallet to shield usernames and passwords using strong encryption and aliases.   Customers accustomed to using the Oracle Wallet with other Oracle products will instantly be familiar with how to use this great new feature Expanded Oracle Application and Technology Support -   GoldenGate can be used along with Oracle Coherence to enable real-time changed data feeds to the Coherence cache using Toplink and the Oracle GoldenGate JMS adapter.     Plus,  Oracle Advanced Customer Services (ACS) now offers a low downtime E-Business Suite platform and database migrations using GoldenGate as the enabling technology.  Keep tuned for more blogs on the new features and the upcoming launch webcast where we will go into these new features in more detail.   In the mean time make sure to read through our white paper "Oracle GoldenGate 12c Release 1 New Features Overview"

  Read the article

• Oracle OpenWorld Preview: Let's Get Social and Interactive

  - by Christie Flanagan

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} On this blog, we often write about getting social and interactive.  Usually, we’re talking about how to create a social business or how to make the customer experience more social and interactive.  Today’s topic is about getting social and interactive as well. But this time we’re talking about getting social and interactive the old fashioned way, face-to-face at Oracle OpenWorld with fellow Oracle WebCenter customers, partners and experts and the broader Oracle community.  Here are some great ways to get social at OpenWorld outside of the exhibition halls and meeting rooms: Oracle OpenWorld Welcome Reception - Sponsored by FujitsuSunday, September 30, 7:00 p.m.–8:30 p.m.Yerba Buena Gardens & Howard Street Tent You’ll definitely want to attend the Opening Ceremonies for Oracle OpenWorld 2012 on Sunday, September 30. Centered in Yerba Buena Gardens (YBG) and shimmying out to other venues, the Opening Ceremonies are not to be missed. Join other attendees for great food and drink, energizing music, networking opportunities, and more. While you’re at YBG (home of ORACLE TEAM USA’s America’s Cup Pavilion), be sure to meet the sailors who will be defending the 34th America’s Cup in 2013. Get a good look at the 161-year old Trophy itself—the oldest trophy still being contested in international sport. And at the AC72 boat display, view a model of the largest wingsail ever built. Oracle WebCenter Customer Appreciation ReceptionTuesday, October 2, 6:30 p.m.—9:30 p.m.The Palace Hotel, Rallston BallroomThose Oracle WebCenter customers who’ve RSVP’d to attend the Oracle WebCenter Customer Appreciation Reception shouldn’t miss this private cocktail reception at one of San Francisco’s finest hotels. Sponsored by Oracle WebCenter partners Fishbowl Solutions, Fujitsu, Keste, Mythics, Redstone Content Solutions, TEAM Informatics, and TekStream, this evening will provide plenty of time to interact with other WebCenter customers, partners and employees over hors d'oeuvres and cocktails. Oracle Appreciation Event – Sponsored by CSC, Fujitsu and IntelWednesday, October 3, 7:30 p.m.—1:00 a.m.Treasure Island, San Francisco On Wednesday night October 3, Treasure Island will be engineered to rock as the Oracle Appreciation Event gets revved up and attendees get rolling. As always at the Oracle Appreciation Event, there will be unlimited refreshments, fun and games, the most awesome views of San Francisco from just about anywhere, and top notch entertainment.  Past performers read like a veritable who’s who of the rock and roll elite. Join us—it's our way of saying thanks to you for supporting Oracle and our flagship conference. Complimentary shuttle service to and from Treasure Island will be provided, so all you have to worry about is having a rocking night of your own. Oracle OpenWorld Music FestivalSeptember 30-October 4, Check schedule for venues and times.Oracle presents the first annual Oracle OpenWorld Musical Festival, featuring some of today’s breakthrough musicians from around the country and the world including Macy Gray, Joss Stone, Jimmy Cliff and The Hives. It’s five nights of back-to-back performances in the heart of San Francisco. Registered Oracle conference attendees get free admission, so remember your badge when you head to a show. With limited space at some venues, these concerts are first-come, first-served. So mark your calendars and get ready for the music to begin. See you there!I hope this give you an idea of the many opportunities to socialize and interact with the Oracle community at OpenWorld, and if you’re a music lover like me, you’re in for a special treat as we debut our first annual Oracle OpenWorld Music Festival.  Check out the links below for more information on these events and the many featured performers: Reflections from the Young Prisms A Brief Soul Session with Joss Stone Mixing It Up with Blues Mix Red Meat’s Music is Rare and Well Done The English Beat’s Dave Wakeling Gets Philosophical Top Ten Reasons to Attend the Oracle Appreciation Event There’s Magic in the Air, There’ll Be Music Everywhere Looking forward to seeing you at OpenWorld!

  Read the article

• Texture and Lighting Issue in 3D world

  - by noah

  Im using OpenGL ES 1.1 for iPhone. I'm attempting to implement a skybox in my 3d world and started out by following one of Jeff Lamarches tutorials on creating textures. Heres the tutorial: iphonedevelopment.blogspot.com/2009/05/opengl-es-from-ground-up-part-6_25.html Ive successfully added the image to my 3d world but am not sure why the lighting on the other shapes has changed so much. I want the shapes to be the original color and have the image in the background. Before: https://www.dropbox.com/s/ojmb8793vj514h0/Screen%20Shot%202012-10-01%20at%205.34.44%20PM.png After: https://www.dropbox.com/s/8v6yvur8amgudia/Screen%20Shot%202012-10-01%20at%205.35.31%20PM.png Heres the init OpenGL: - (void)initOpenGLES1 { glShadeModel(GL_SMOOTH); // Enable lighting glEnable(GL_LIGHTING); // Turn the first light on glEnable(GL_LIGHT0); const GLfloat lightAmbient[] = {0.2, 0.2, 0.2, 1.0}; const GLfloat lightDiffuse[] = {0.8, 0.8, 0.8, 1.0}; const GLfloat matAmbient[] = {0.3, 0.3, 0.3, 0.5}; const GLfloat matDiffuse[] = {1.0, 1.0, 1.0, 1.0}; const GLfloat matSpecular[] = {1.0, 1.0, 1.0, 1.0}; const GLfloat lightPosition[] = {0.0, 0.0, 1.0, 0.0}; const GLfloat lightShininess = 100.0; //Configure OpenGL lighting glEnable(GL_LIGHTING); glEnable(GL_LIGHT0); glMaterialfv(GL_FRONT_AND_BACK, GL_AMBIENT, matAmbient); glMaterialfv(GL_FRONT_AND_BACK, GL_DIFFUSE, matDiffuse); glMaterialfv(GL_FRONT_AND_BACK, GL_SPECULAR, matSpecular); glMaterialf(GL_FRONT_AND_BACK, GL_SHININESS, lightShininess); glLightfv(GL_LIGHT0, GL_AMBIENT, lightAmbient); glLightfv(GL_LIGHT0, GL_DIFFUSE, lightDiffuse); glLightfv(GL_LIGHT0, GL_POSITION, lightPosition); // Define a cutoff angle glLightf(GL_LIGHT0, GL_SPOT_CUTOFF, 40.0); // Set the clear color glClearColor(0, 0, 0, 1.0f); // Projection Matrix config glMatrixMode(GL_PROJECTION); glLoadIdentity(); CGSize layerSize = self.view.layer.frame.size; // Swapped height and width for landscape mode gluPerspective(45.0f, (GLfloat)layerSize.height / (GLfloat)layerSize.width, 0.1f, 750.0f); [self initSkyBox]; // Modelview Matrix config glMatrixMode(GL_MODELVIEW); glLoadIdentity(); // This next line is not really needed as it is the default for OpenGL ES glTexEnvi(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE); glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); glDisable(GL_BLEND); // Enable depth testing glEnable(GL_DEPTH_TEST); glDepthFunc(GL_LESS); glDepthMask(GL_TRUE); } Heres the drawSkybox that gets called in the drawFrame method: -(void)drawSkyBox { glDisable(GL_LIGHTING); glDisable(GL_DEPTH_TEST); glEnableClientState(GL_VERTEX_ARRAY); glEnableClientState(GL_NORMAL_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); static const SSVertex3D vertices[] = { {-1.0, 1.0, -0.0}, { 1.0, 1.0, -0.0}, {-1.0, -1.0, -0.0}, { 1.0, -1.0, -0.0} }; static const SSVertex3D normals[] = { {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0} }; static const GLfloat texCoords[] = { 0.0, 0.5, 0.5, 0.5, 0.0, 0.0, 0.5, 0.0 }; glLoadIdentity(); glTranslatef(0.0, 0.0, -3.0); glBindTexture(GL_TEXTURE_2D, texture[0]); glVertexPointer(3, GL_FLOAT, 0, vertices); glNormalPointer(GL_FLOAT, 0, normals); glTexCoordPointer(2, GL_FLOAT, 0, texCoords); glDrawArrays(GL_TRIANGLE_STRIP, 0, 4); glDisableClientState(GL_VERTEX_ARRAY); glDisableClientState(GL_NORMAL_ARRAY); glDisableClientState(GL_TEXTURE_COORD_ARRAY); glEnable(GL_LIGHTING); glEnable(GL_DEPTH_TEST); } Heres the init Skybox: -(void)initSkyBox { // Turn necessary features on glEnable(GL_TEXTURE_2D); glEnable(GL_BLEND); glBlendFunc(GL_ONE, GL_SRC_COLOR); // Bind the number of textures we need, in this case one. glGenTextures(1, &texture[0]); // create a texture obj, give unique ID glBindTexture(GL_TEXTURE_2D, texture[0]); // load our new texture name into the current texture glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR); NSString *path = [[NSBundle mainBundle] pathForResource:@"space" ofType:@"jpg"]; NSData *texData = [[NSData alloc] initWithContentsOfFile:path]; UIImage *image = [[UIImage alloc] initWithData:texData]; GLuint width = CGImageGetWidth(image.CGImage); GLuint height = CGImageGetHeight(image.CGImage); CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); void *imageData = malloc( height * width * 4 ); // times 4 because will write one byte for rgb and alpha CGContextRef cgContext = CGBitmapContextCreate( imageData, width, height, 8, 4 * width, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big ); // Flip the Y-axis CGContextTranslateCTM (cgContext, 0, height); CGContextScaleCTM (cgContext, 1.0, -1.0); CGColorSpaceRelease( colorSpace ); CGContextClearRect( cgContext, CGRectMake( 0, 0, width, height ) ); CGContextDrawImage( cgContext, CGRectMake( 0, 0, width, height ), image.CGImage ); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, width, height, 0, GL_RGBA, GL_UNSIGNED_BYTE, imageData); CGContextRelease(cgContext); free(imageData); [image release]; [texData release]; } Any help is greatly appreciated.

  Read the article

• Project of Projects with team Foundation Server 2010

  - by Martin Hinshelwood

  It is pretty much accepted that you should use Areas instead of having many small Team Projects when you are using Team Foundation Server 2010. I have implemented this scenario many times and this is the current iteration of layout and considerations. If like me you work with many customers you will find that you get into a grove for how to set these things up to make them as easily understandable for everyone, while giving the best functionality. The trick is in making it as intuitive as possible for both you and the developers that need to work with it. There are five main places where you need to have the Product or Project name in prominence of any other value. Area Iteration Source Code Work Item Queries Build Once you decide how you are doing this in each of these places you need to keep to it religiously. Evan if you have one source code file to keep, make sure it is in the right place. This makes your developers and others working with the format familiar with where everything should go, as well as building up mussel memory. This prevents the neat system degenerating into a nasty mess. Areas Areas are traditionally used to separate out parts of your product / project so that you can see how much effort has gone into each. Figure: The top level areas are for reporting and work item separation There are massive advantages of using this method. You can: move work from one project to another rename a project / product It is far more likely that a project or product gets renamed than a department. Tip: If you have many projects, over 100, you should consider categorising them here, but make sure that the actual project name always sits at the same level so you know which is which. Figure: Always keep things that are the same at the same level Note: You may use these categories only at the Area/Iteration level to make it easier to select on drop down lists. You may not want to use them everywhere. On the other hand, for consistency it would be better to. Iterations Iterations are usually used to some sort of time based consideration. Here I am splitting into Iterations with periodic releases. Figure: Each product needs to be able to have its own cadence The ability to have each project run at its own pace and to enable them to have their own release schedule is often of paramount importance and you don’t want to fix your 100+ projects to all be released on the same date. Source Code Having a good structure for your source even if you are not branching or having multiple products under the same structure is always a good idea. Figure: Separate out your products source You need to think about both your branches as well as the structure of your source. All your code should be under “Source” and everything you need to build your solution including Build Scripts and 3rd party tools should be under your “Main” (branch) folder. This should them be branched by “Quality”, “Release” or both to get the most out of your branching structure. The important thing is to make sure you branch (or be able to branch) everything you need to build, test and deploy your application to an environment. That environment may be development, test or even production, but I can’t stress the importance of having everything your need. Note: You usually will not be able to install custom software on your build server. Store any *.dll’s or *.exe’s that you need under the “Tools\Tool1” folder. Note: Consult the Branching Guidance for Team Foundation Server 2010 for more on branching Figure: Adding category may be a necessary evil Even if you have to have a couple of categories called “Default”, it is better than not knowing the difference between a folder, Product and Branch. Work Item Queries Queries are used to load lists of Work Items out of TFS so you can see what work you have. This means that you want to also separate queries out by Product / project to make it easier to Figure: Again you have the same first level structure Having Folders also in Work Item Tracking we do the same thing. We put all the queries under a folder named for the Product / Project and change each query to have “AreaPath=[TeamProject]\[ProductX]” in the query instead of the standard “Project=@Project”. Tip: Don’t have a folder with new queries for each iteration. Instead have a single “Current” folder that has queries that point to the current iteration. Just change the queries as you move from one iteration to another. Tip: You can ctrl+drag the “Product1” folder to create your “Product2” folder. Builds You may have many builds both for individual products but also for different quality's. This can be further complicated by having some builds that action “Gated Check-In” and others that are specifically for “Release”, “Test” or another purpose. Figure: There are no folders, yet, for the builds so you need a good naming convention Its a pity that there are no folders under builds, some way to categorise would be nice. In lue of that at the moment you can use a functional naming convention that at least allows you to find what you want. Conclusion It is really easy to both achieve and to stick to this format if you take the time to do it. Unless you have 1000+ builds or 100+ Products you are unlikely run into any issues. Even then there are things you can do to mitigate the issues and I have describes some of them above. Let me know if you can think of any other things to make this easier.

  Read the article

• Not getting desired results with SSAO implementation

  - by user1294203

  After having implemented deferred rendering, I tried my luck with a SSAO implementation using this Tutorial. Unfortunately, I'm not getting anything that looks like SSAO, you can see my result below. You can see there is some weird pattern forming and there is no occlusion shading where there needs to be (i.e. in between the objects and on the ground). The shaders I implemented follow: #VS #version 330 core uniform mat4 invProjMatrix; layout(location = 0) in vec3 in_Position; layout(location = 2) in vec2 in_TexCoord; noperspective out vec2 pass_TexCoord; smooth out vec3 viewRay; void main(void){ pass_TexCoord = in_TexCoord; viewRay = (invProjMatrix * vec4(in_Position, 1.0)).xyz; gl_Position = vec4(in_Position, 1.0); } #FS #version 330 core uniform sampler2D DepthMap; uniform sampler2D NormalMap; uniform sampler2D noise; uniform vec2 projAB; uniform ivec3 noiseScale_kernelSize; uniform vec3 kernel[16]; uniform float RADIUS; uniform mat4 projectionMatrix; noperspective in vec2 pass_TexCoord; smooth in vec3 viewRay; layout(location = 0) out float out_AO; vec3 CalcPosition(void){ float depth = texture(DepthMap, pass_TexCoord).r; float linearDepth = projAB.y / (depth - projAB.x); vec3 ray = normalize(viewRay); ray = ray / ray.z; return linearDepth * ray; } mat3 CalcRMatrix(vec3 normal, vec2 texcoord){ ivec2 noiseScale = noiseScale_kernelSize.xy; vec3 rvec = texture(noise, texcoord * noiseScale).xyz; vec3 tangent = normalize(rvec - normal * dot(rvec, normal)); vec3 bitangent = cross(normal, tangent); return mat3(tangent, bitangent, normal); } void main(void){ vec2 TexCoord = pass_TexCoord; vec3 Position = CalcPosition(); vec3 Normal = normalize(texture(NormalMap, TexCoord).xyz); mat3 RotationMatrix = CalcRMatrix(Normal, TexCoord); int kernelSize = noiseScale_kernelSize.z; float occlusion = 0.0; for(int i = 0; i < kernelSize; i++){ // Get sample position vec3 sample = RotationMatrix * kernel[i]; sample = sample * RADIUS + Position; // Project and bias sample position to get its texture coordinates vec4 offset = projectionMatrix * vec4(sample, 1.0); offset.xy /= offset.w; offset.xy = offset.xy * 0.5 + 0.5; // Get sample depth float sample_depth = texture(DepthMap, offset.xy).r; float linearDepth = projAB.y / (sample_depth - projAB.x); if(abs(Position.z - linearDepth ) < RADIUS){ occlusion += (linearDepth <= sample.z) ? 1.0 : 0.0; } } out_AO = 1.0 - (occlusion / kernelSize); } I draw a full screen quad and pass Depth and Normal textures. Normals are in RGBA16F with the alpha channel reserved for the AO factor in the blur pass. I store depth in a non linear Depth buffer (32F) and recover the linear depth using: float linearDepth = projAB.y / (depth - projAB.x); where projAB.y is calculated as: and projAB.x as: These are derived from the glm::perspective(gluperspective) matrix. z_n and z_f are the near and far clip distance. As described in the link I posted on the top, the method creates samples in a hemisphere with higher distribution close to the center. It then uses random vectors from a texture to rotate the hemisphere randomly around the Z direction and finally orients it along the normal at the given pixel. Since the result is noisy, a blur pass follows the SSAO pass. Anyway, my position reconstruction doesn't seem to be wrong since I also tried doing the same but with the position passed from a texture instead of being reconstructed. I also tried playing with the Radius, noise texture size and number of samples and with different kinds of texture formats, with no luck. For some reason when changing the Radius, nothing changes. Does anyone have any suggestions? What could be going wrong?

  Read the article

• How Important is Project Team Communication in the Public Sector?

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By Paul Bender, Director of Public Administration Strategy, Oracle Primavera It goes without saying that communication between project team members is a core competency that connects every member of a project team to a common set of strategies, goals and actions. If these components are not effectively shared by project leads and understood by stakeholders, project outcomes can be jeopardized and budgets may incur unnecessary risk. As reported by PMI’s 2013 Pulse of the Profession, an organization’s ability to meet project timelines, budgets and especially goals significantly impacts its ability to survive—and even thrive. The Pulse study revealed that the most crucial success factor in project management is effective communication to all stakeholders—a critical core competency for public agencies. PMI’s 2013 Pulse of the Profession report revealed that US$135 million is at risk for every US$1 billion spent on a project. Further research on the importance of effective project team communication uncovers that a startling 56 percent (US$75 million of that US$135 million) is at risk due to ineffective communication. Simply stated: public agencies cannot execute strategic initiatives unless they can effectively communicate their strategic alignment and business benefits. Executives and project managers around the world agree that poor communication between project team members contributes to project failure. A Forbes Insights 2010 Strategic Initiatives Study “Adapting Corporate Strategy to the Changing Economy,” found that nine out of ten CEOs believe that communication is critical to the success of their strategic initiatives, and nearly half of respondents cite communication as an integral and active component of their strategic planning and execution process. Project managers see it similarly from their side as well. According to PMI’s Pulse research, 55 percent of project managers agree that effective communication to all stakeholders is the most critical success factor in project management. As we all know, not all projects succeed. On average, two in five projects do not meet their original goals and business intent, and one-half of those unsuccessful projects are related to ineffective communication. Results reveal that while all aspects of project communication can be challenging to public agencies, the biggest problem areas are: A gap in understanding the business benefits. Challenges surrounding the language used to deliver project-related information, which is often unclear and peppered with project management jargon. Public agencies -- federal, state, and local -- have difficulty communicating with the appropriate levels with clarity and detail. This difficulty is likely exacerbated by the divide between each key audience and its understanding of project-specific, technical language. For those involved in public sector project and portfolio management, I would be interested to hear your thoughts and please visit Primavera EPPM solutions for public sector.

  Read the article

• 24 Hours of PASS – first reflections

  - by Rob Farley

  A few days after the end of 24HOP, I find myself reflecting on it. I’m still waiting on most of the information. I want to be able to discover things like where the countries represented on each of the sessions, and things like that. So far, I have the feedback scores and the numbers of attendees. The data was provided in a PDF, so while I wait for it to appear in a more flexible format, I’ve pushed the 24 attendee numbers into Excel. This chart shows the numbers by time. Remember that we started at midnight GMT, which was 10:30am in my part of the world and 8pm in New York. It’s probably no surprise that numbers drooped a bit at the start, stayed comparatively low, and then grew as the larger populations of the English-speaking world woke up. I remember last time 24HOP ran for 24 hours straight, there were quite a few sessions with less than 100 attendees. None this time though. We got close, but even when it was 4am in New York, 8am in London and 7pm in Sydney (which would have to be the worst slot for attracting people), we still had over 100 people tuning in. As expected numbers grew as the UK woke up, and even more so as the US did, with numbers peaking at 755 for the “3pm in New York” session on SQL Server Data Tools. Kendra Little almost reached those numbers too, and certainly contributed the biggest ‘spike’ on the chart with her session five hours earlier. Of all the sessions, Kendra had the highest proportion of ‘Excellent’s for the “Overall Evaluation of the session” question, and those of you who saw her probably won’t be surprised by that. Kendra had one of the best ranked sessions from the 24HOP event this time last year (narrowly missing out on being top 3), and she has produced a lot of good video content since then. The reports indicate that there were nearly 8.5 thousand attendees across the 24 sessions, averaging over 350 at each one. I’m looking forward to seeing how many different people that was, although I do know that Wil Sisney managed to attend every single one (if you did too, please let me know). Wil even moderated one of the sessions, which made his feat even greater. Thanks Wil. I also want to send massive thanks to Dave Dustin. Dave probably would have attended all of the sessions, if it weren’t for a power outage that forced him to take a break. He was also a moderator, and it was during this session that he earned special praise. Part way into the session he was moderating, the speaker lost connectivity and couldn’t get back for about fifteen minutes. That’s an incredibly long time when you’re in a live presentation. There were over 200 people tuned in at the time, and I’m sure Dave was as stressed as I was to have a speaker disappear. I started chasing down a phone number for the speaker, while Dave spoke to the audience. And he did brilliantly. He started answering questions, and kept doing that until the speaker came back. Bear in mind that Dave hadn’t expected to give a presentation on that topic (or any other), and was simply drawing on his SQL expertise to get him through. Also consider that this was between midnight at 1am in Dave’s part of the world (Auckland, NZ). I would’ve been expecting just to welcome people, monitor questions, probably read some out, and in general, help make things run smoothly. He went far beyond the call of duty, and if I had a medal to give him, he’d definitely be getting one. On the whole, I think this 24HOP was a success. We tried a different platform, and I think for the most part it was a popular move. We didn’t ask the question “Was this better than LiveMeeting?”, but we did get a number of people telling us that they thought the platform was very good. Some people have told me I get a chance to put my feet up now that this is over. As I’m also co-ordinating a tour of SQLSaturday events across the Australia/New Zealand region, I don’t quite get to take that much of a break (plus, there’s the little thing of squeezing in seven SQL 2012 exams over the next 2.5 weeks). But I am pleased to be reflecting on this event rather than anticipating it. There were a number of factors that could have gone badly, but on the whole I’m pleased about how it went. A massive thanks to everyone involved. If you’re reading this and thinking you wish you could’ve tuned in more, don’t worry – they were all recorded and you’ll be able to watch them on demand very soon. But as well as that, PASS has a stream of content produced by the Virtual Chapters, so you can keep learning from the comfort of your desk all year round. More info on them at sqlpass.org, of course.

  Read the article

• useFastClick in JQuery Mobile

  - by Yousef_Jadallah

    Normal 0 false false false EN-US X-NONE AR-SA /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} For who want to convert the application from JQM Alpha to JQM Beta 1, needs to bind  click  events to the new vclick one. Click event is working in general browsers butt that is needed for iOS and Android, useFastClick  is (touch + mouse click). Moreover if you have this event alot in your project you can turn useFastClick off in mobileinit event: $(document).bind("mobileinit", function () {             $.mobile.useFastClick = false; });   vclick event is needed to support touch events to make the page changes to happen faster, and to perform the URL hiding. So you need to change something like this  $('btnShow').live("click", function (evt) {   To :  $('btnShow').live("vclick", function (evt) {     For more information : http://jquerymobile.com/test/docs/api/globalconfig.html   Here you can find full example in this case : <!DOCTYPE ><html xmlns="http://www.w3.org/1999/xhtml"><head>    <link rel="stylesheet" href="http://code.jquery.com/mobile/1.0b1/jquery.mobile-1.0b1.min.css" />    <script src="http://code.jquery.com/jquery-1.6.1.min.js"></script>    <script src="http://code.jquery.com/mobile/1.0b1/jquery.mobile-1.0b1.min.js"></script>    <script type="text/javascript">     //Here you need to use vclick instead of click event         $('ul[id="MylistView"] a').live("vclick", function (evt) {            alert('list click');        });      </script>    <title></title></head><body>    <div id="FirstPage" data-role="page" data-theme="b">        <div data-role="header">            <h1>                Page Title</h1>        </div>        <div data-role="content">            <ul id="MylistView" data-role="listview" data-theme="g">                <li><a href="#SecondPage">Acura</a></li>                <li><a href="#SecondPage">Audi</a></li>                <li><a href="#SecondPage">BMW</a></li>            </ul>        </div>        <div data-role="footer">            <h4>                Page Footer</h4>        </div>    </div>    <div id="SecondPage" data-role="page" data-theme="b"   >        <div data-role="header" >            <h1>                Page Title</h1>        </div>        Second Page        <div data-role="footer">            <h4>                Page Footer</h4>        </div>    </div></body></html>     Hope that helps.

  Read the article

• OpenGL problem with FBO integer texture and color attachment

  - by Grieverheart

  In my simple renderer, I have 2 FBOs one that contains diffuse, normals, instance ID and depth in that order and one that I use store the ssao result. The textures I use for the first FBO are RGB8, RGBA16F, R32I and GL_DEPTH_COMPONENT32F for the depth. For the second FBO I use an R16F texture. My rendering process is to first render to everything I mentioned in the first FBO, then bind depth and normals textures for reading for the ssao pass and write to the second FBO. After that I bind the second FBO's texture for reading in my blur shader and bind the first FBO for writing. What I intend to do is to write the blurred ssao value to the alpha component of the Normals texture. Here are where the problems start. First of all, I use shading language 3.3, which my graphics card does support. I manage ouputs in my shaders using layout(location = #). Now, the normals texture should be bound to color attachment 1, but when I use 1, it seems to write to my diffuse texture which should be in color attachment 0. When I instead use layout(location = 0), it gets correctly written to my normals texture. Besides this, my instance ID texture also gets resets after running the blur shader which is weird because if I use a float texture and write to it instanceID / nInstances, the texture doesn't get reset after the blur shader has ran. Here is how I prepare my first FBO: bool CGBuffer::Init(unsigned int WindowWidth, unsigned int WindowHeight){ //Create FBO glGenFramebuffers(1, &m_fbo); glBindFramebuffer(GL_DRAW_FRAMEBUFFER, m_fbo); //Create gbuffer and Depth Buffer Textures glGenTextures(GBUFF_NUM_TEXTURES, &m_textures[0]); glGenTextures(1, &m_depthTexture); //prepare gbuffer for(unsigned int i = 0; i < GBUFF_NUM_TEXTURES; i++){ glBindTexture(GL_TEXTURE_2D, m_textures[i]); if(i == GBUFF_TEXTURE_TYPE_NORMAL) glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA16F, WindowWidth, WindowHeight, 0, GL_RGBA, GL_FLOAT, NULL); else if(i == GBUFF_TEXTURE_TYPE_DIFFUSE) glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB8, WindowWidth, WindowHeight, 0, GL_RGB, GL_FLOAT, NULL); else if(i == GBUFF_TEXTURE_TYPE_ID) glTexImage2D(GL_TEXTURE_2D, 0, GL_R32I, WindowWidth, WindowHeight, 0, GL_RED_INTEGER, GL_INT, NULL); else{ std::cout << "Error in FBO initialization" << std::endl; return false; } glFramebufferTexture2D(GL_DRAW_FRAMEBUFFER, GL_COLOR_ATTACHMENT0 + i, GL_TEXTURE_2D, m_textures[i], 0); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP); } //prepare depth buffer glBindTexture(GL_TEXTURE_2D, m_depthTexture); glTexImage2D(GL_TEXTURE_2D, 0, GL_DEPTH_COMPONENT32F, WindowWidth, WindowHeight, 0, GL_DEPTH_COMPONENT, GL_FLOAT, NULL); glFramebufferTexture2D(GL_DRAW_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, GL_TEXTURE_2D, m_depthTexture, 0); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri (GL_TEXTURE_2D, GL_TEXTURE_COMPARE_MODE, GL_NONE); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP); GLenum DrawBuffers[] = {GL_COLOR_ATTACHMENT0, GL_COLOR_ATTACHMENT1, GL_COLOR_ATTACHMENT2}; glDrawBuffers(GBUFF_NUM_TEXTURES, DrawBuffers); GLenum Status = glCheckFramebufferStatus(GL_FRAMEBUFFER); if(Status != GL_FRAMEBUFFER_COMPLETE){ std::cout << "FB error, status 0x" << std::hex << Status << std::endl; return false; } //Restore default framebuffer glBindFramebuffer(GL_FRAMEBUFFER, 0); return true; } where I use an enum defined as, enum GBUFF_TEXTURE_TYPE{ GBUFF_TEXTURE_TYPE_DIFFUSE, GBUFF_TEXTURE_TYPE_NORMAL, GBUFF_TEXTURE_TYPE_ID, GBUFF_NUM_TEXTURES }; Am I missing some kind of restriction? Does the color attachment of the FBO's textures somehow gets reset i.e. I'm using a re-size function which re-sizes the textures of the FBO but should I perhaps call glFramebufferTexture2D again too? EDIT: Here is the shader in question: #version 330 core uniform sampler2D aoSampler; uniform vec2 TEXEL_SIZE; // x = 1/res x, y = 1/res y uniform bool use_blur; noperspective in vec2 TexCoord; layout(location = 0) out vec4 out_AO; void main(void){ if(use_blur){ float result = 0.0; for(int i = -1; i < 2; i++){ for(int j = -1; j < 2; j++){ vec2 offset = vec2(TEXEL_SIZE.x * i, TEXEL_SIZE.y * j); result += texture(aoSampler, TexCoord + offset).r; // -0.004 because the texture seems to be a bit displaced } } out_AO = vec4(vec3(0.0), result / 9); } else out_AO = vec4(vec3(0.0), texture(aoSampler, TexCoord).r); }

  Read the article

• Airline mess - what a journey

  - by Mike Dietrich

  What a day, what a journey ... Flew this noon from Munich to Zuerich for catch my ongoing flight to San Francisco with Swiss. And that day did start very well as Lufthansa messed up the connection flight by 42 minutes for a 35 minute flight. And as I was obviously the only passenger connection to San Francisco nobody picked me up at the airplane to bring me directly to my connection as Swiss did for the 8 passengers connection to Miami. So I missed my flight. What a start - and many thanks to Lufthansa. I was not the only one missing a connection as Lufthansa/Swiss had canceled the flight before due to "technical problems". In Zuerich Swiss did rebook me via Frankfurt with Lufthansa to board a United Airlines flight to San Francisco. "Ouch" I thought. I had my share of experience with United already as they've messed up my luggage on the way to San Francisco some years ago and it took them five (!!!) days to fly my bag over and deliver it. But actually it was the only option today. So I said "Yes". A big mistake as I've learned later on. The Frankfurt flight was delayed as well "due to a late incoming aircraft". But there was plenty of time. And I went to the Swiss counter at the gate and let them check if my baggage is on that flight to Frankfurt. They've said "Yes". Boarding the plane with a delay of 45 minutes (the typical Lufthansa delay these days) I spotted my Rimowa trolley right next to the plane on the airfield. So I was sure that it will be send to Frankfurt. In Frankfurt I went to the United counter once it did open - had to go through the passport check they do for US flights as well - and they've said "Yes, your luggage is with us". Well ... Arriving in San Francisco with just a bit of a some minutes delay and a very fast immigration procedure I saw the first bags with Priority tags getting pushed to the baggage claim - but mine was not there. I did wait ... and wait ... and wait. Well, thanks United, you did it again!!! I flew twice in the past years United Airlines - and in both cases they've messed up my luggage on the way to San Francisco. How lovely is that ... Now the real fun started again as the lady at the "Lost and Found" counter for luggage spotted my luggage in her system in Zuerich - and told me it's supposed to be sent with LH1191 to Frankfurt on Sept 27. But this was yesterday in Europe - it's already Sept 28 - and I saw my luggage in front of the airplane. So I'd suppose it's in Frankfurt already. But what could she do? Nothing but doing the awful paperwork. And "No Mr Dietrich, we don't call international numbers". Thank you, United. Next time I'll try to get a contract for a US land line in advance. They can't even tell you which plane will bring your luggage. It may be tomorrow with UA flight arriving around 4pm in SFO. I'm looking forward to some hours in the wonderful United Airlines call center waiting line. Last time I did spend 60-90 minutes every day until I got my luggage. If it takes again that long then OOW will be over by then. I love airline travel - and especially with United Airlines. And by the way ... they gave us these nice fancy packages during the flight:  That looks good - what's in that box??? Yes, really ... a bag of potato chips. Pure fat - very healthy.  I doubt that I'll ever fly United Airlines again!!!

  Read the article

• OpenGL 3 and the Radeon HD 4850x2

  - by rotard

  A while ago, I picked up a copy of the OpenGL SuperBible fifth edition and slowly and painfully started teaching myself OpenGL the 3.3 way, after having been used to the 1.0 way from school way back when. Making things more challenging, I am primarily a .NET developer, so I was working in Mono with the OpenTK OpenGL wrapper. On my laptop, I put together a program that let the user walk around a simple landscape using a couple shaders that implemented per-vertex coloring and lighting and texture mapping. Everything was working brilliantly until I ran the same program on my desktop. Disaster! Nothing would render! I have chopped my program down to the point where the camera sits near the origin, pointing at the origin, and renders a square (technically, a triangle fan). The quad renders perfectly on my laptop, coloring, lighting, texturing and all, but the desktop renders a small distorted non-square quadrilateral that is colored incorrectly, not affected by the lights, and not textured. I suspect the graphics card is at fault, because I get the same result whether I am booted into Ubuntu 10.10 or Win XP. I did find that if I pare the vertex shader down to ONLY outputting the positional data and the fragment shader to ONLY outputting a solid color (white) the quad renders correctly. But as SOON as I start passing in color data (whether or not I use it in the fragment shader) the output from the vertex shader is distorted again. The shaders follow. I left the pre-existing code in, but commented out so you can get an idea what I was trying to do. I'm a noob at glsl so the code could probably be a lot better. My laptop is an old lenovo T61p with a Centrino (Core 2) Duo and an nVidia Quadro graphics card running Ubuntu 10.10 My desktop has an i7 with a Radeon HD 4850 x2 (single card, dual GPU) from Saphire dual booting into Ubuntu 10.10 and Windows XP. The problem occurs in both XP and Ubuntu. Can anyone see something wrong that I am missing? What is "special" about my HD 4850x2? string vertexShaderSource = @" #version 330 precision highp float; uniform mat4 projection_matrix; uniform mat4 modelview_matrix; //uniform mat4 normal_matrix; //uniform mat4 cmv_matrix; //Camera modelview. Light sources are transformed by this matrix. //uniform vec3 ambient_color; //uniform vec3 diffuse_color; //uniform vec3 diffuse_direction; in vec4 in_position; in vec4 in_color; //in vec3 in_normal; //in vec3 in_tex_coords; out vec4 varyingColor; //out vec3 varyingTexCoords; void main(void) { //Get surface normal in eye coordinates //vec4 vEyeNormal = normal_matrix * vec4(in_normal, 0); //Get vertex position in eye coordinates //vec4 vPosition4 = modelview_matrix * vec4(in_position, 0); //vec3 vPosition3 = vPosition4.xyz / vPosition4.w; //Get vector to light source in eye coordinates //vec3 lightVecNormalized = normalize(diffuse_direction); //vec3 vLightDir = normalize((cmv_matrix * vec4(lightVecNormalized, 0)).xyz); //Dot product gives us diffuse intensity //float diff = max(0.0, dot(vEyeNormal.xyz, vLightDir.xyz)); //Multiply intensity by diffuse color, force alpha to 1.0 //varyingColor.xyz = in_color * diff * diffuse_color.xyz; varyingColor = in_color; //varyingTexCoords = in_tex_coords; gl_Position = projection_matrix * modelview_matrix * in_position; }"; string fragmentShaderSource = @" #version 330 //#extension GL_EXT_gpu_shader4 : enable precision highp float; //uniform sampler2DArray colorMap; //in vec4 varyingColor; //in vec3 varyingTexCoords; out vec4 out_frag_color; void main(void) { out_frag_color = vec4(1,1,1,1); //out_frag_color = varyingColor; //out_frag_color = vec4(varyingColor, 1) * texture(colorMap, varyingTexCoords.st); //out_frag_color = vec4(varyingColor, 1) * texture(colorMap, vec3(varyingTexCoords.st, 0)); //out_frag_color = vec4(varyingColor, 1) * texture2DArray(colorMap, varyingTexCoords); }"; Note that in this code the color data is accepted but not actually used. The geometry is outputted the same (wrong) whether the fragment shader uses varyingColor or not. Only if I comment out the line varyingColor = in_color; does the geometry output correctly. Originally the shaders took in vec3 inputs, I only modified them to take vec4s while troubleshooting.

  Read the article

• BYOD-The Tablet Difference

  - by Samantha.Y. Ma

  By Allison Kutz, Lindsay Richardson, and Jennifer Rossbach, Sales Consultants Normal 0 false false false EN-US ZH-TW X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Less than three years ago, Apple introduced a new concept to the world: The Tablet. It’s hard to believe that in only 32 months, the iPad induced an entire new way to do business. Because of their mobility and ease-of-use, tablets have grown in popularity to keep up with the increasing “on the go” lifestyle, and their popularity isn’t expected to decrease any time soon. In fact, global tablet sales are expected to increase drastically within the next five years, from 56 million tablets to 375 million by 2016. Tablets have been utilized for every function imaginable in today’s world. With over 730,000 active applications available for the iPad, these tablets are educational devices, portable book collections, gateways into social media, entertainment for children when Mom and Dad need a minute on their own, and so much more. It’s no wonder that 74% of those who own a tablet use it daily, 60% use it several times a day, and an average of 13.9 hours per week are spent tapping away. Tablets have become a critical part of a user’s personal life; but why stop there? Businesses today are taking major strides in implementing these devices, with the hopes of benefiting from efficiency and productivity gains. Limo and taxi drivers use tablets as payment devices instead of traditional cash transactions. Retail outlets use tablets to find the exact merchandise customers are looking for. Professors use tablets to teach their classes, and business professionals demonstrate solutions and review reports from tablets. Since an overwhelming majority of tablet users have started to use their personal iPads, PlayBooks, Galaxys, etc. in the workforce, organizations have had to make a change. In many cases, companies are willing to make that change. In fact, 79% of companies are making new investments in mobility this year. Gartner reported that 90% of organizations are expected to support corporate applications on personal devices by 2014. It’s not just companies that are changing. Business professionals have become accustomed to tablets making their personal lives easier, and want that same effect in the workplace. Professionals no longer want to waste time manually entering data in their computer, or worse yet in a notebook, especially when the data has to be later transcribed to an online system. The response: the Bring Your Own Device phenomenon. According to Gartner, BOYD is “an alternative strategy allowing employees, business partners and other users to utilize a personally selected and purchased client device to execute enterprise applications and access data.” Employees whose companies embrace this trend are more efficient because they get to use devices they are already accustomed to. Tablets change the game when it comes to how sales professionals perform their jobs. Sales reps can easily store and access customer information and analytics using tablet applications, such as Oracle Fusion Tap. This method is much more enticing for sales reps than spending time logging interactions on their (what seem to be outdated) computers. Forrester & IDC reported that on average sales reps spend 65% of their time on activities other than selling, so having a tablet application to use on the go is extremely powerful. In February, Information Week released a list of “9 Powerful Business Uses for Tablet Computers,” ranging from “enhancing the customer experience” to “improving data accuracy” to “eco-friendly motivations”. Tablets compliment the lifestyle of professionals who strive to be effective and efficient, both in the office and on the road. Three Things Businesses Need to do to Embrace BYOD Make customer-facing websites tablet-friendly for consistent user experiences Develop tablet applications to continue to enhance the customer experience Embrace and use the technology that comes with tablets Almost 55 million people in the U.S. own tablets because they are convenient, easy, and powerful. These are qualities that companies strive to achieve with any piece of technology. The inherent power of the devices coupled with the growing number of business applications ensures that tablets will transform the way that companies and employees perform.

  Read the article

• Taking the Plunge - or Dipping Your Toe - into the Fluffy IAM Cloud by Paul Dhanjal (Simeio Solutions)

  - by Greg Jensen

  In our last three posts, we’ve examined the revolution that’s occurring today in identity and access management (IAM). We looked at the business drivers behind the growth of cloud-based IAM, the shortcomings of the old, last-century IAM models, and the new opportunities that federation, identity hubs and other new cloud capabilities can provide by changing the way you interact with everyone who does business with you. In this, our final post in the series, we’ll cover the key things you, the enterprise architect, should keep in mind when considering moving IAM to the cloud. Invariably, what starts the consideration process is a burning business need: a compliance requirement, security vulnerability or belt-tightening edict. Many on the business side view IAM as the “silver bullet” – and for good reason. You can almost always devise a solution using some aspect of IAM. The most critical question to ask first when using IAM to address the business need is, simply: is my solution complete? Typically, “business” is not focused on the big picture. Understandably, they’re focused instead on the need at hand: Can we be HIPAA compliant in 6 months? Can we tighten our new hire, employee transfer and termination processes? What can we do to prevent another password breach? Can we reduce our service center costs by the end of next quarter? The business may not be focused on the complete set of services offered by IAM but rather a single aspect or two. But it is the job – indeed the duty – of the enterprise architect to ensure that all aspects are being met. It’s like remodeling a house but failing to consider the impact on the foundation, the furnace or the zoning or setback requirements. While the homeowners may not be thinking of such things, the architect, of course, must. At Simeio Solutions, the way we ensure that all aspects are being taken into account – to expose any gaps or weaknesses – is to assess our client’s IAM capabilities against a five-step maturity model ranging from “ad hoc” to “optimized.” The model we use is similar to Capability Maturity Model Integration (CMMI) developed by the Software Engineering Institute (SEI) at Carnegie Mellon University. It’s based upon some simple criteria, which can provide a visual representation of how well our clients fair when evaluated against four core categories: ·         Program Governance ·         Access Management (e.g., Single Sign-On) ·         Identity and Access Governance (e.g., Identity Intelligence) ·         Enterprise Security (e.g., DLP and SIEM) Often our clients believe they have a solution with all the bases covered, but the model exposes the gaps or weaknesses. The gaps are ideal opportunities for the cloud to enter into the conversation. The complete process is straightforward: 1.    Look at the big picture, not just the immediate need – what is our roadmap and how does this solution fit? 2.    Determine where you stand with respect to the four core areas – what are the gaps? 3.    Decide how to cover the gaps – what role can the cloud play? Returning to our home remodeling analogy, at some point, if gaps or weaknesses are discovered when evaluating the complete impact of the proposed remodel – if the existing foundation wouldn’t support the new addition, for example – the owners need to decide if it’s time to move to a new house instead of trying to remodel the old one. However, with IAM it’s not an either-or proposition – i.e., either move to the cloud or fix the existing infrastructure. It’s possible to use new cloud technologies just to cover the gaps. Many of our clients start their migration to the cloud this way, dipping in their toe instead of taking the plunge all at once. Because our cloud services offering is based on the Oracle Identity and Access Management Suite, we can offer a tremendous amount of flexibility in this regard. The Oracle platform is not a collection of point solutions, but rather a complete, integrated, best-of-breed suite. Yet it’s not an all-or-nothing proposition. You can choose just the features and capabilities you need using a pay-as-you-go model, incrementally turning on and off services as needed. Better still, all the other capabilities are there, at the ready, whenever you need them. Spooling up these cloud-only services takes just a fraction of the time it would take a typical organization to deploy internally. SLAs in the cloud may be higher than on premise, too. And by using a suite of software that’s complete and integrated, you can dramatically lower cost and complexity. If your in-house solution cannot be migrated to the cloud, you might consider using hardware appliances such as Simeio’s Cloud Interceptor to extend your enterprise out into the network. You might also consider using Expert Managed Services. Cost is usually the key factor – not just development costs but also operational sustainment costs. Talent or resourcing issues often come into play when thinking about sustaining a program. Expert Managed Services such as those we offer at Simeio can address those concerns head on. In a cloud offering, identity and access services lend to the new paradigms described in my previous posts. Most importantly, it allows us all to focus on what we're meant to do – provide value, lower costs and increase security to our respective organizations. It’s that magic “silver bullet” that business knew you had all along. If you’d like to talk more, you can find us at simeiosolutions.com.

  Read the article

• Objects won't render when Texture Compression + Mipmapping is Enabled

  - by felipedrl

  I'm optimizing my game and I've just implemented compressed (DXTn) texture loading in OpenGL. I've worked my way removing bugs but I can't figure out this one: objects w/ DXTn + mipmapped textures are not being rendered. It's not like they are appearing with a flat color, they just don't appear at all. DXTn textured objs render and mipmapped non-compressed textures render just fine. The texture in question is 256x256 I generate the mips all the way down 4x4, i.e 1 block. I've checked on gDebugger and it display all the levels (7) just fine. I'm using GL_LINEAR_MIPMAP_NEAREST for min filter and GL_LINEAR for mag one. The texture is being compressed and mipmaps being created offline with Paint.NET tool using super sampling method. (I also tried bilinear just in case) Source follow: [SNIPPET 1: Loading DDS into sys memory + Initializing Object] // Read header DDSHeader header; file.read(reinterpret_cast<char*>(&header), sizeof(DDSHeader)); uint pos = static_cast<uint>(file.tellg()); file.seekg(0, std::ios_base::end); uint dataSizeInBytes = static_cast<uint>(file.tellg()) - pos; file.seekg(pos, std::ios_base::beg); // Read file data mData = new unsigned char[dataSizeInBytes]; file.read(reinterpret_cast<char*>(mData), dataSizeInBytes); file.close(); mMipmapCount = header.mipmapcount; mHeight = header.height; mWidth = header.width; mCompressionType = header.pf.fourCC; // Only support files divisible by 4 (for compression blocks algorithms) massert(mWidth % 4 == 0 && mHeight % 4 == 0); massert(mCompressionType == NO_COMPRESSION || mCompressionType == COMPRESSION_DXT1 || mCompressionType == COMPRESSION_DXT3 || mCompressionType == COMPRESSION_DXT5); // Allow textures up to 65536x65536 massert(header.mipmapcount <= MAX_MIPMAP_LEVELS); mTextureFilter = TextureFilter::LINEAR; if (mMipmapCount > 0) { mMipmapFilter = MipmapFilter::NEAREST; } else { mMipmapFilter = MipmapFilter::NO_MIPMAP; } mBitsPerPixel = header.pf.bitcount; if (mCompressionType == NO_COMPRESSION) { if (header.pf.flags & DDPF_ALPHAPIXELS) { // The only format supported w/ alpha is A8R8G8B8 massert(header.pf.amask == 0xFF000000 && header.pf.rmask == 0xFF0000 && header.pf.gmask == 0xFF00 && header.pf.bmask == 0xFF); mInternalFormat = GL_RGBA8; mFormat = GL_BGRA; mDataType = GL_UNSIGNED_BYTE; } else { massert(header.pf.rmask == 0xFF0000 && header.pf.gmask == 0xFF00 && header.pf.bmask == 0xFF); mInternalFormat = GL_RGB8; mFormat = GL_BGR; mDataType = GL_UNSIGNED_BYTE; } } else { uint blockSizeInBytes = 16; switch (mCompressionType) { case COMPRESSION_DXT1: blockSizeInBytes = 8; if (header.pf.flags & DDPF_ALPHAPIXELS) { mInternalFormat = GL_COMPRESSED_RGBA_S3TC_DXT1_EXT; } else { mInternalFormat = GL_COMPRESSED_RGB_S3TC_DXT1_EXT; } break; case COMPRESSION_DXT3: mInternalFormat = GL_COMPRESSED_RGBA_S3TC_DXT3_EXT; break; case COMPRESSION_DXT5: mInternalFormat = GL_COMPRESSED_RGBA_S3TC_DXT5_EXT; break; default: // Not Supported (DXT2, DXT4 or any compression format) massert(false); } } [SNIPPET 2: Uploading into video memory] massert(mData != NULL); glGenTextures(1, &mHandle); massert(mHandle!=0); glBindTexture(GL_TEXTURE_2D, mHandle); commitFiltering(); uint offset = 0; Renderer* renderer = Renderer::getInstance(); switch (mInternalFormat) { case GL_RGB: case GL_RGBA: case GL_RGB8: case GL_RGBA8: for (uint i = 0; i < mMipmapCount + 1; ++i) { uint width = std::max(1U, mWidth >> i); uint height = std::max(1U, mHeight >> i); glTexImage2D(GL_TEXTURE_2D, i, mInternalFormat, width, height, mHasBorder, mFormat, mDataType, &mData[offset]); offset += width * height * (mBitsPerPixel / 8); } break; case GL_COMPRESSED_RGB_S3TC_DXT1_EXT: case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT: case GL_COMPRESSED_RGBA_S3TC_DXT3_EXT: case GL_COMPRESSED_RGBA_S3TC_DXT5_EXT: { uint blockSize = 16; if (mInternalFormat == GL_COMPRESSED_RGB_S3TC_DXT1_EXT || mInternalFormat == GL_COMPRESSED_RGBA_S3TC_DXT1_EXT) { blockSize = 8; } uint width = mWidth; uint height = mHeight; for (uint i = 0; i < mMipmapCount + 1; ++i) { uint nBlocks = ((width + 3) / 4) * ((height + 3) / 4); // Only POT textures allowed for mipmapping massert(width % 4 == 0 && height % 4 == 0); glCompressedTexImage2D(GL_TEXTURE_2D, i, mInternalFormat, width, height, mHasBorder, nBlocks * blockSize, &mData[offset]); offset += nBlocks * blockSize; if (width <= 4 && height <= 4) { break; } width = std::max(4U, width / 2); height = std::max(4U, height / 2); } break; } default: // Not Supported massert(false); } Also I don't understand the "+3" in the block size computation but looking for a solution for my problema I've encountered people defining it as that. I guess it won't make a differente for POT textures but I put just in case. Thanks.

  Read the article

• Managing text-maps in a 2D array on to be painted on HTML5 Canvas

  - by weka

  So, I'm making a HTML5 RPG just for fun. The map is a <canvas> (512px width, 352px height | 16 tiles across, 11 tiles top to bottom). I want to know if there's a more efficient way to paint the <canvas>. Here's how I have it right now. How tiles are loaded and painted on map The map is being painted by tiles (32x32) using the Image() piece. The image files are loaded through a simple for loop and put into an array called tiles[] to be PAINTED on using drawImage(). First, we load the tiles... and here's how it's being done: // SET UP THE & DRAW THE MAP TILES tiles = []; var loadedImagesCount = 0; for (x = 0; x <= NUM_OF_TILES; x++) { var imageObj = new Image(); // new instance for each image imageObj.src = "js/tiles/t" + x + ".png"; imageObj.onload = function () { console.log("Added tile ... " + loadedImagesCount); loadedImagesCount++; if (loadedImagesCount == NUM_OF_TILES) { // Onces all tiles are loaded ... // We paint the map for (y = 0; y <= 15; y++) { for (x = 0; x <= 10; x++) { theX = x * 32; theY = y * 32; context.drawImage(tiles[5], theY, theX, 32, 32); } } } }; tiles.push(imageObj); } Naturally, when a player starts a game it loads the map they last left off. But for here, it an all-grass map. Right now, the maps use 2D arrays. Here's an example map. [[4, 1, 4, 1, 4, 1, 4, 1, 4, 1, 4, 1, 1, 1, 1, 1], [1, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 1, 1, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 1, 1, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 13, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 13, 11, 11, 11, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 1, 1, 1, 1, 1, 1, 1, 13, 13, 13, 13, 13, 1], [1, 1, 1, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 1, 1, 1]]; I get different maps using a simple if structure. Once the 2d array above is return, the corresponding number in each array will be painted according to Image() stored inside tile[]. Then drawImage() will occur and paint according to the x and y and times it by 32 to paint on the correct x-y coordinate. How multiple map switching occurs With my game, maps have five things to keep track of: currentID, leftID, rightID, upID, and bottomID. currentID: The current ID of the map you are on. leftID: What ID of currentID to load when you exit on the left of current map. rightID: What ID of currentID to load when you exit on the right of current map. downID: What ID of currentID to load when you exit on the bottom of current map. upID: What ID of currentID to load when you exit on the top of current map. Something to note: If either leftID, rightID, upID, or bottomID are NOT specific, that means they are a 0. That means they cannot leave that side of the map. It is merely an invisible blockade. So, once a person exits a side of the map, depending on where they exited... for example if they exited on the bottom, bottomID will the number of the map to load and thus be painted on the map. Here's a representational .GIF to help you better visualize: As you can see, sooner or later, with many maps I will be dealing with many IDs. And that can possibly get a little confusing and hectic. The obvious pros is that it load 176 tiles at a time, refresh a small 512x352 canvas, and handles one map at time. The con is that the MAP ids, when dealing with many maps, may get confusing at times. My question Is this an efficient way to store maps (given the usage of tiles), or is there a better way to handle maps? I was thinking along the lines of a giant map. The map-size is big and it's all one 2D array. The viewport, however, is still 512x352 pixels. Here's another .gif I made (for this question) to help visualize: Sorry if you cannot understand my English. Please ask anything you have trouble understanding. Hopefully, I made it clear. Thanks.

  Read the article

• 2D Particle Explosion

  - by TheBroodian

  I'm developing a 2D action game, and in said game I've given my primary character an ability he can use to throw a fireball. I'm trying to design an effect so that when said fireball collides (be it with terrain or with an enemy) that the fireball will explode. For the explosion effect I've created a particle that once placed into game space will follow random, yet autonomic behavior based on random variables. Here is my question: When I generate my explosion (essentially 90 of these particles) I get one of two behaviors, 1) They are all generated with the same random variables, and don't resemble an explosion at all, more like a large mass of clumped sprites that all follow the same randomly generated path. 2) If I assign each particle a unique seed to its random number generator, they are a little bit -more- spread out, yet clumping is still visible (they seem to fork out into 3 different directions) Does anybody have any tips for producing particle-based 2D explosions? I'll include the code for my particle and the event I'm generating them in. Fire particle class: public FireParticle(xTile.Dimensions.Location StartLocation, ContentManager content) { worldLocation = StartLocation; fireParticleAnimation = new FireParticleAnimation(content); random = new Random(); int rightorleft = random.Next(0, 3); int upordown = random.Next(1, 3); int xVelocity = random.Next(0, 101); int yVelocity = random.Next(0, 101); Vector2 tempVector2 = new Vector2(0,0); if (rightorleft == 1) { tempVector2 = new Vector2(xVelocity, tempVector2.Y); } else if (rightorleft == 2) { tempVector2 = new Vector2(-xVelocity, tempVector2.Y); } if (upordown == 1) { tempVector2 = new Vector2(tempVector2.X, -yVelocity); } else if (upordown == 2) { tempVector2 = new Vector2(tempVector2.X, yVelocity); } velocity = tempVector2; scale = random.Next(1, 11); upwardForce = -10; dead = false; } public FireParticle(xTile.Dimensions.Location StartLocation, ContentManager content, int seed) { worldLocation = StartLocation; fireParticleAnimation = new FireParticleAnimation(content); random = new Random(seed); int rightorleft = random.Next(0, 3); int upordown = random.Next(1, 3); int xVelocity = random.Next(0, 101); int yVelocity = random.Next(0, 101); Vector2 tempVector2 = new Vector2(0, 0); if (rightorleft == 1) { tempVector2 = new Vector2(xVelocity, tempVector2.Y); } else if (rightorleft == 2) { tempVector2 = new Vector2(-xVelocity, tempVector2.Y); } if (upordown == 1) { tempVector2 = new Vector2(tempVector2.X, -yVelocity); } else if (upordown == 2) { tempVector2 = new Vector2(tempVector2.X, yVelocity); } velocity = tempVector2; scale = random.Next(1, 11); upwardForce = -10; dead = false; } #endregion #region Update and Draw public void Update(GameTime gameTime) { elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; fireParticleAnimation.Update(gameTime); Vector2 moveAmount = velocity * elapsed; xTile.Dimensions.Location newPosition = new xTile.Dimensions.Location(worldLocation.X + (int)moveAmount.X, worldLocation.Y + (int)moveAmount.Y); worldLocation = newPosition; velocity.Y += upwardForce; if (fireParticleAnimation.finishedPlaying) { dead = true; } } public void Draw(SpriteBatch spriteBatch) { spriteBatch.Draw( fireParticleAnimation.image.Image, new Rectangle((int)drawLocation.X, (int)drawLocation.Y, scale, scale), fireParticleAnimation.image.SizeAndsource, Color.White * fireParticleAnimation.image.Alpha); } Fireball explosion event: public override void Update(GameTime gameTime) { if (enabled) { float elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; foreach (Heart_of_Fire.World_Objects.Particles.FireParticle particle in explosionParticles.ToList()) { particle.Update(gameTime); if (particle.Dead) { explosionParticles.Remove(particle); } } collisionRectangle = new Microsoft.Xna.Framework.Rectangle((int)wrldPstn.X, (int)wrldPstn.Y, 5, 5); explosionCheck = exploded; if (!exploded) { coreGraphic.Update(gameTime); tailGraphic.Update(gameTime); Vector2 moveAmount = velocity * elapsed; moveAmount = horizontalCollision(moveAmount, layer); moveAmount = verticalCollision(moveAmount, layer); Vector2 newPosition = new Vector2(wrldPstn.X + moveAmount.X, wrldPstn.Y + moveAmount.Y); if (hasCollidedHorizontally || hasCollidedVertically) { exploded = true; } wrldPstn = newPosition; worldLocation = new xTile.Dimensions.Location((int)wrldPstn.X, (int)wrldPstn.Y); } if (explosionCheck != exploded) { for (int i = 0; i < 90; i++) { explosionParticles.Add(new World_Objects.Particles.FireParticle( new Location( collisionRectangle.X + random.Next(0, 6), collisionRectangle.Y + random.Next(0, 6)), contentMgr)); } } if (exploded && explosionParticles.Count() == 0) { //enabled = false; } } }

  Read the article

• Why bother writing an Windows 8 app?

  - by Dennis Vroegop

  So you want to know more about development for Window 8. Great! There are lots of reasons you should be excited about this. Since I don’t know why YOU are interested in this, I’ll make a list of reasons people can choose from. (as a side note: whenever I talk about Win8 development I am referring to the Metro Style / WinRt side of things. Apps for the ‘classic’ desktop side of Win8 on Intel are business as usual…) So… Why would you care about making an app for Windows 8? 1. It’s cool. Let’s not beat around the bush: if you like development for a hobby then you’ll love to work on this new platform. You can create apps in a relative short time (short time as in compared to writing a new CRM system) and that makes it great for a hobby product. 2. You’ll stand out. Hey, we all need an ego boost every now and then. We all need to feel special. So if you can manage to be one of the first to have you app in the Store then you’ll likely to be noticed. Just close your eyes for a moment and image you standing in a bar. It’s crowded, and then you casually say “Oh yeah, I just had my app certified and it’s in the Win8 store now”. People will stop talking, will offer you drinks and beautiful women / gorgeous man / furry creatures from Alpha Centauri (whatever your preferences are) will propose. Or maybe not. Anyway…. 3. Make some cash! IDC predicts there will be about 350,000,000 Windows 8 licenses sold in the next year. Think about that number. 350,000,000. And they all have access to the Store. Where you’re app will be. With one little click they can select it, download and somehow magically $1.00 or $2.00 from their bank account is transferred to yours. Now, I am not saying that all of those people will download and buy your app but what if only 1% of them did? Remember: there aren’t that many apps available yet….. 4. Learn. Creating new small apps is a great way to learn new stuff. Yes, you could read about it (on this blog for instance) but the only way to learn something is to do it. So be prepared for the future and learn something new by doing it.Write an app! Now! 5. The biggie (for me at least): it’s fun. Even if you remove the points above it’s still fun to write for these devices and this platform. Now some of you will say : “But why not write a great app for IOS or Android?” I think this is a valid question. Of course the novelty of the platform wears out and points 2 and 3 from above list will not be as relevant as it is today. But still 1 4 and 5 remain. And don’t forget: if you already work on the Microsoft platform it’s not that hard to learn this new Win8 stuff. If you have done some XAML development (be it WPF or Silverlight) you are almost there in becoming a good Win8 developer. So you’ll be more productive much sooner than when you have to learn Objective C or Java. Even if you’re a HTML / Javascript developer (I say developer here, not designer) you’ll be up to speed on Win8 development pretty soon. Yes, you, that funky Web Developer who lives and breathes HTML5, CSS3 and JavaScript / Node.Js / JQuery: you too can be a Win8 developer. A first class Win8 developer! So.. Download the stuff you need from http://dev.windows.com install Windows 8 and Visual Studio 12 and by the time you’re ready I’ll be working on the next article: how to do all this? Happy coding!

  Read the article

• Eloqua Experience 2013: Mystique, Modern Marketing and Masterful Engagement

  - by Mike Stiles

  The following is a guest post from Erick Mott, a social business leader at Oracle Eloqua. There’s a growing gap between 20th century marketing and a modern marketing way of doing business. I can’t think of a better example of modern marketing in action than what more than 2,000 people experienced in San Francisco at #EE13; customer-obsession, multichannel content, and real-time engagement all coming together at one extraordinary event. This was my first Eloqua Experience as a new Oracle Eloqua employee. In weeks prior, I heard about the mystique but didn’t know what to expect. What I’ve come to understand with more clarity is everything we do revolves around customer success, and we operate and educate at all times with these five tenets in mind: 1. Targeting: Really Know Your Buyer 2. Engagement: Create a 1:1 Relationship 3. Conversion: Visualize Guided Thinking 4. Analysis: Learn What’s Working 5. Marketing Technology: Enable and Extend the Cloud Product News from Eloqua Experience 2013 We made some announcements that John Stetic, VP of Products, Oracle Eloqua covers in this brief ‘Modern Marketing Minute’ video recorded after Wednesday’s keynote; summarized below, too: Oracle Eloqua AdFocus: While understanding the impact of a specific marketing channel was formerly relegated to marketers’ wish lists, the channels we now focus on are digital, social, and mobile. AdFocus gives marketers a single platform to dynamically create, manage and measure display ads alongside owned and earned media. AdFocus enables marketers to target only key accounts or prospects you want to reach with display ads, as well as provide creative content or personalized ad copy based on their persona and activities. Oracle Eloqua Profiler: The details of what we now know about customers have expanded into a universal customer profile, which can be used to create highly targeted segments. Marketers now can take data that’s not even stored in Eloqua to help targeted and score prospects for a complete, multichannel view of the customer. Profiler gives sales reps one, detailed view of the prospect to extend views beyond Oracle Eloqua asset activity (emails, forms, page views) to any external assets stored in Oracle Eloqua. Marketing Resource Management: New capabilities create more secure and controlled access to marketing resources and data. New integrations provide greater insight into campaign resources and management through a central marketing calendar and simplify resource management. Integrated Sales and Marketing Funnel: An integrated sales and marketing funnel view gives marketing and sales users, cross-functional teams, and executive management a consistent and clear view of pipeline performance. It also quickly provides users with historical metrics across different time spans and conditions. Eloqua AppCloud: More than 20 new AppCloud partners have been added to the community, which now includes 100+ apps. Eloqua AppCloud now provides modern marketers with an even broader range of marketing applications that help expand and enrich sales and marketing efforts; easily accessible in the Topliners Community. Social Capabilities: Recent integration between Oracle Eloqua and Oracle Social Relationship Management (SRM) deliver a comprehensive, scalable and integrated modern marketing solution. New capabilities include better tracking of social activities for a more complete customer profile. Engage Facebook custom audiences with AdFocus to deliver ads and meaningful experiences through trusted social networks. Biggest and Best Eloqua Experience. There’s a lot of talk in the industry about the Marketing Cloud. At Oracle Eloqua, we have been on a mission of delivering the most advanced and integrated modern marketing technology on the planet. It’s not just a concept but reality with proven execution, as seen first-hand this week in San Francisco. In this video, Kevin Akeroyd, SVP of Oracle Eloqua, provides some highlights of what made this year’s Eloqua Experience, exceptional, including Steve Woods’ presentation about the journey of modern marketers and Andrea Ward’s conversation with Vince Gilligan, creator of the Breaking Bad television series. The 2013 Markie Awards The Oracle Eloqua Marketing Cloud was best exemplified for me as 19 Markies were awarded to customers for their exceptional creativity and results as modern marketers. Wow, what a night to remember with so many committed and talented people working to create an extraordinary experience! To learn more about how to become a modern marketer, check out these resources. We look forward to seeing you next year at Eloqua Experience. More on Erick: 20 years experience at Oracle, Ektron, Sitecore, Lyris, Habeas, Nokia, creatorbase, Mark Monitor, Cisco Systems, GlobalFluency, Sun Microsystems, Philips NV, Elm Products and CBS TV. Patent holder with agency, Fortune 500, media, and startup company expertise. @mikestiles

  Read the article

• My own personal use of Oracle Linux

  - by wcoekaer

  It always is easier to explain something with examples... Many people still don't seem to understand some of the convenient things around using Oracle Linux and since I personally (surprise!) use it at home, let me give you an idea. I have quite a few servers at home and I also have 2 hosted servers with a hosted provider. The servers at home I use mostly to play with random Linux related things, or with Oracle VM or just try out various new Oracle products to learn more. I like the technology, it's like a hobby really. To be able to have a good installation experience and use an officially certified Linux distribution and not waste time trying to find the right libraries, I, of course, use Oracle Linux. Now, at least I can get a copy of Oracle Linux for free (even if I was not working for Oracle) and I can/could use that on as many servers at home (or at my company if I worked elsewhere) for testing, development and production. I just go to http://edelivery.oracle.com/linux and download the version(s) I want and off I go. Now, I also have the right (and not because I am an employee) to take those images and put them on my own server and give them to someone else, I in fact, just recently set up my own mirror on my own hosted server. I don't have to remove oracle-logos, I don't have to rebuild the ISO images, I don't have to recompile anything, I can just put the whole binary distribution on my own server without contract. Perfectly free to do so. Of course the source code of all of this is there, I have a copy of the UEK code at home, just cloned from https://oss.oracle.com/git/?p=linux-2.6-unbreakable.git. And as you can see, the entire changelog, checkins, merges from Linus's tree, complete overview of everything that got changed from kernel to kernel, from patch to patch, errata to errata. No obfuscating, no tar balls and spending time with diff, or go read bug reports to find out what changed (seems silly to me). Some of my servers are on the external network and I need to be current with security errata, but guess what, no problem, my servers are hooked up to http://public-yum.oracle.com which is open, free, and completely up to date, in a consistent, reliable way with any errata, security or bugfix. So I have nothing to worry about. Also, not because I am an employee. Anyone can. And, with this, I also can, and have, set up my own mirror site that hosts these RPMs. both binary and source rpms. Because I am free to get them and distribute them. I am quite capable of supporting my servers on my own, so I don't need to rely on the support organization so I don't need to have a support subscription :-). So I don't need to pay. Neither would you, at least not with Oracle Linux. Another cool thing. The hosted servers came (unfortunately) with Centos installed. While Centos works just fine as is, I tend to prefer to be current with my security errata(reliably) and I prefer to just maintain one yum repository instead of 2, I converted them over to Oracle Linux as well (in place) so they happily receive and use the exact same RPMs. Since Oracle Linux is exactly the same from a user/application point of view as RHEL, including files like /etc/redhat-release and no changes from .el. to .centos. I know I have nothing to worry about installing one of the RHEL applications. So, OL everywhere makes my life a lot easier and why not... Next! Since I run Oracle VM and I have -tons- of VM's on my machines, in some cases on my big WOPR box I have 15-20 VMs running. Well, no problem, OL is free and I don't have to worry about counting the number of VMs, whether it's 1, or 4, or more than 10 ... like some other alternatives started doing... and finally :) I like to try out new stuff, not 3 year old stuff. So with UEK2 as part of OL6 (and 6.3 in particular) I can play with a 3.0.x based kernel and it just installs and runs perfectly clean with OL6, so quite current stuff in an environment that I know works, no need to toy around with an unsupported pre-alpha upstream distribution with libraries and versions that are not compatible with production software (I have nothing against ubuntu or fedora or opensuse... just not what I can rely on or use for what I need, and I don't need a desktop). pretty compelling. I say... and again, it doesn't matter that I work for Oracle, if I was working elsewhere, or not at all, all of the above would still apply. Student, teacher, developer, whatever. contrast this with $349 for 2 sockets and oneguest and selfsupport per year to even just get the software bits.

  Read the article

• rotate player based off of joystick

  - by pengume

  Hey everyone I have this game that i am making in android and I have a touch screen joystick that moves the player around based on the joysticks position. I cant figure out how to also get the player to rotate at the same angle of the joystick. so when the joystick is to the left the players bitmap is rotated to the left as well. Maybe someone here has some sample code I could look at here is the joysticks class that I am using. `public class GameControls implements OnTouchListener { public float initx = DroidzActivity.screenWidth - 45; //255; // 320 og 425 public float inity = DroidzActivity.screenHeight - 45;//425; // 480 og 267 public Point _touchingPoint = new Point( DroidzActivity.screenWidth - 45, DroidzActivity.screenHeight - 45); public Point _pointerPosition = new Point(DroidzActivity.screenWidth - 100, DroidzActivity.screenHeight - 100); // ogx 220 ogy 150 private Boolean _dragging = false; private boolean attackMode = false; @Override public boolean onTouch(View v, MotionEvent event) { update(event); return true; } private MotionEvent lastEvent; public boolean ControlDragged; private static double angle; public void update(MotionEvent event) { if (event == null && lastEvent == null) { return; } else if (event == null && lastEvent != null) { event = lastEvent; } else { lastEvent = event; } // drag drop if (event.getAction() == MotionEvent.ACTION_DOWN) { if ((int) event.getX() > 0 && (int) event.getX() < 50 && (int) event.getY() > DroidzActivity.screenHeight - 160 && (int) event.getY() < DroidzActivity.screenHeight - 0) { setAttackMode(true); } else { _dragging = true; } } else if (event.getAction() == MotionEvent.ACTION_UP) { if(isAttackMode()){ setAttackMode(false); } _dragging = false; } if (_dragging) { ControlDragged = true; // get the pos _touchingPoint.x = (int) event.getX(); _touchingPoint.y = (int) event.getY(); // Log.d("GameControls", "x = " + _touchingPoint.x + " y = " //+ _touchingPoint.y); // bound to a box if (_touchingPoint.x < DroidzActivity.screenWidth - 75) { // og 400 _touchingPoint.x = DroidzActivity.screenWidth - 75; } if (_touchingPoint.x > DroidzActivity.screenWidth - 15) {// og 450 _touchingPoint.x = DroidzActivity.screenWidth - 15; } if (_touchingPoint.y < DroidzActivity.screenHeight - 75) {// og 240 _touchingPoint.y = DroidzActivity.screenHeight - 75; } if (_touchingPoint.y > DroidzActivity.screenHeight - 15) {// og 290 _touchingPoint.y = DroidzActivity.screenHeight - 15; } // get the angle setAngle(Math.atan2(_touchingPoint.y - inity, _touchingPoint.x - initx) / (Math.PI / 180)); // Move the ninja in proportion to how far // the joystick is dragged from its center _pointerPosition.y += Math.sin(getAngle() * (Math.PI / 180)) * (_touchingPoint.x / 70); // og 180 70 _pointerPosition.x += Math.cos(getAngle() * (Math.PI / 180)) * (_touchingPoint.x / 70); // make the pointer go thru if (_pointerPosition.x > DroidzActivity.screenWidth) { _pointerPosition.x = 0; } if (_pointerPosition.x < 0) { _pointerPosition.x = DroidzActivity.screenWidth; } if (_pointerPosition.y > DroidzActivity.screenHeight) { _pointerPosition.y = 0; } if (_pointerPosition.y < 0) { _pointerPosition.y = DroidzActivity.screenHeight; } } else if (!_dragging) { ControlDragged = false; // Snap back to center when the joystick is released _touchingPoint.x = (int) initx; _touchingPoint.y = (int) inity; // shaft.alpha = 0; } } public void setAttackMode(boolean attackMode) { this.attackMode = attackMode; } public boolean isAttackMode() { return attackMode; } public void setAngle(double angle) { this.angle = angle; } public static double getAngle() { return angle; } }` I should also note that the player has animations based on when he is moving or attacking. EDIT: I got the angle and am rotating the sprite around in the correct angle however it rotates on the wrong spot. My sprite is one giant bitmap that gets cut into four pieces and only one shown at a time to animate walking. here is the code I am using to rotate him right now. ` public void draw(Canvas canvas,int pointerX, int pointerY) { Matrix m; if (setRotation){ // canvas.save(); m = new Matrix(); m.reset(); // spriteWidth and spriteHeight are for just the current frame showed //m.setTranslate(spriteWidth / 2, spriteHeight / 2); //get and set rotation for ninja based off of joystick m.preRotate((float) GameControls.getRotation()); //create the rotated bitmap flipedSprite = Bitmap.createBitmap(bitmap , 0, 0,bitmap.getWidth(),bitmap.getHeight() , m, true); //set new bitmap to rotated ninja setBitmap(flipedSprite); setRotation = false; // canvas.restore(); Log.d("Ninja View", "angle of rotation= " +(float) GameControls.getRotation()); } ` And then the draw method // create the destination rectangle for the ninjas current animation frame // pointerX and pointerY are from the joystick moving the ninja around destRect = new Rect(pointerX, pointerY, pointerX + spriteWidth, pointerY + spriteHeight); canvas.drawBitmap(bitmap, getSourceRect(), destRect, null);

  Read the article

• Clouds, Clouds, Clouds Everywhere, Not a Drop of Rain!

  - by sxkumar

  At the recently concluded Oracle OpenWorld 2012, the center of discussion was clearly Cloud. Over the five action packed days, I got to meet a large number of customers and most of them had serious interest in all things cloud.  Public Cloud - particularly the Oracle Cloud - clearly got a lot of attention and interest. I think the use cases and the value proposition for public cloud is pretty straight forward. However, when it comes to private cloud, there were some interesting revelations.  Well, I shouldn’t really call them revelations since they are pretty consistent with what I have heard from customers at other conferences as well as during 1:1 interactions. While the interest in enterprise private cloud remains to be very high, only a handful of enterprises have truly embarked on a journey to create what the purists would call true private cloud - with capabilities such as self-service and chargeback/show back. For a large majority, today's reality is simply consolidation and virtualization - and they are quite far off from creating an agile, self-service and transparent IT infrastructure which is what the enterprise cloud is all about.  Even a handful of those who have actually implemented a close-to-real enterprise private cloud have taken an infrastructure centric approach and are seeing only limited business upside. Quite a few were frank enough to admit that chargeback and self-service isn’t something that they see an immediate need for.  This is in quite contrast to the picture being painted by all those surveys out there that show a large number of enterprises having already implemented an enterprise private cloud.  On the face of it, this seems quite contrary to the observations outlined above. So what exactly is the reality? Well, the reality is that there is undoubtedly a huge amount of interest among enterprises about transforming their legacy IT environment - which is often seen as too rigid, too fragmented, and ultimately too expensive - to something more agile, transparent and business-focused. At the same time however, there is a great deal of confusion among CIOs and architects about how to get there. This isn't very surprising given all the buzz and hype surrounding cloud computing. Every IT vendor claims to have the most unique solution and there isn't a single IT product out there that does not have a cloud angle to it. Add to this the chatter on the blogosphere, it will get even a sane mind spinning.  Consequently, most  enterprises are still struggling to fully understand the concept and value of enterprise private cloud.  Even among those who have chosen to move forward relatively early, quite a few have made their decisions more based on vendor influence/preferences rather than what their businesses actually need.  Clearly, there is a disconnect between the promise of the enterprise private cloud and the current adoption trends.  So what is the way forward?  I certainly do not claim to have all the answers. But here is a perspective that many cloud practitioners have found useful and thus worth sharing. To take a step back, the fundamental premise of the enterprise private cloud is IT transformation. It is the quest to create a more agile, transparent and efficient IT infrastructure that is driven more by business needs rather than constrained by operational and procedural inefficiencies. It is the new way of delivering and consuming IT services - where the IT organizations operate more like enablers of  strategic services rather than just being the gatekeepers of IT resources. In an enterprise private cloud environment, IT organizations are expected to empower the end users via self-service access/control and provide the business stakeholders a transparent view of how the resources are being used, what’s the cost of delivering a given service, how well are the customers being served, etc.  But the most important thing to note here is the enterprise private cloud is not just an IT project, rather it is a business initiative to create an IT setup that is more aligned with the needs of today's dynamic and highly competitive business environment. Surprised? You shouldn’t be. Just remember how the business users have been at the forefront of public cloud adoption within enterprises and private cloud is no exception.   Such a broad-based transformation makes cloud more than a technology initiative. It requires people (organizational) and process changes as well, and these changes are as critical as is the choice of right tools and technology. In my next blog,  I will share how essential it is for enterprise cloud technology to go hand-in hand with process re-engineering and organization changes to unlock true value of  enterprise cloud. I am sharing a short video from my session "Managing your private Cloud" at Oracle OpenWorld 2012. More videos from this session will be posted at the recently introduced Zero to Cloud resource page. Many other experts of Oracle enterprise private cloud solution will join me on this blog "Zero to Cloud"  and share best practices , deployment tips and information on how to plan, build, deploy, monitor, manage , meter and optimize the enterprise private cloud. We look forward to your feedback, suggestions and having an engaging conversion with you on this blog.

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >