Search Results

Search found 3338 results on 134 pages for 'desing patterns'.

Page 116/134 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• Graphics trouble after resuming from hibernate or suspend

  - by Voyagerfan5761

  I have a Dell Inspiron 2650 (with NVidia graphics, using nouveau drivers) that I'm using to try out Ubuntu. It's all great, except that Hibernate and Suspend aren't usable. Yes, I know that questions about power-save issues are rampant in the Linux support universe, but it seems that every time I find a solution it's for a very specific hardware combination and doesn't apply to me. So anyway, here goes. When I resume from either power-saving mode, I'll get graphics problems anywhere on the range from a few scattered random-colored pixels that won't change; all the way to full-screen patterns that don't change as I move the mouse, hit keys on the keyboard, or even bring up the shutdown dialog using the power button. Those full-screen issues (which may involve stripes with random pixels, partial black screen, or both) always end in me forcing the machine to shut down by holding the power button. I haven't done much testing yet to determine what severity level is most commonly associated with each mode, but I do avoid using either power-save option because of these issues. I'll add info on my hardware as I can gather it (no home internet connection, and this laptop is tethered to my desk by a dead battery and casing degradation). Please feel free to request something specific in the question comments. Hardware Info See this hardinfo report for my system's hardware configuration. (No, my username is not "myuser"; I sanitized hardinfo's output before publishing it.) Screenshots These screenshots are from a relatively mild occurrence, which happened after the second hibernation I took that session. The first one worked great, though I used the wireless card and Firefox heavily between the two hibernation attempts. Take a look at what happened when I opened my home directory in Nautilus and scrolled it: See below for the situations I've tested so far. The real trouble comes when the machine resumes to an unusable state; in such cases I can't even unlock the screen or properly reboot, much less take a screenshot. I have a hunch that putting a CD in the drive will cause such major failures, and I will try that at some point; see related question. Situations Tested Maverick (10.10) Suspend Seems to suspend nicely with nothing running Seems to suspend nicely with flash drive plugged in On resume from suspend with no flash drive, Terminal and gedit running: Funky graphics on top of log output, then blank screen with pixelated cursor; no response to power button (normally will shutdown 60 seconds later) Hibernate Seems to hibernate nicely with nothing running Seems to hibernate nicely with a few apps (Terminal, Mouse preferences) running Seems to not hibernate when flash drive plugged in Seems to not hibernate when System Monitor is running Have encountered failed hibernation (after several hours and one successful hibernate/thaw cycle) with no external media connected and no programs running except normal background stuff Natty LiveCD (11.04_2010-12-22) When I tested it, Natty wouldn't stay logged in. It played part of the login sound and then [ OK ] appeared in the top right corner (white-on-black terminal text) for a few seconds. Then it kicked me back to the Unlock screen. It did that four times before I gave up and just tested suspend from the Unlock screen. Suspend Resumed to vertical gray and black lines 2px (?) wide, then shifted to vertical "jail bars" of black over a black screen with above-described random pixels and mouse pointer. No apparent response to input from mouse (clicking randomly). Keyboard and touchpad unrecognized.

  Read the article

• Universities 2030: Learning from the Past to Anticipate the Future

  - by Mohit Phogat

  What will the landscape of international higher education look like a generation from now? What challenges and opportunities lie ahead for universities, especially “global” research universities? And what can university leaders do to prepare for the major social, economic, and political changes—both foreseen and unforeseen—that may be on the horizon? The nine essays in this collection proceed on the premise that one way to envision “the global university” of the future is to explore how earlier generations of university leaders prepared for “global” change—or at least responded to change—in the past. As the essays in this collection attest, many of the patterns associated with contemporary “globalization” or “internationalization” are not new; similar processes have been underway for a long time (some would say for centuries).[1] A comparative-historical look at universities’ responses to global change can help today’s higher-education leaders prepare for the future. Written by leading historians of higher education from around the world, these nine essays identify “key moments” in the internationalization of higher education: moments when universities and university leaders responded to new historical circumstances by reorienting their relationship with the broader world. Covering more than a century of change—from the late nineteenth century to the early twenty-first—they explore different approaches to internationalization across Europe, Asia, Australia, North America, and South America. Notably, while the choice of historical eras was left entirely open, the essays converged around four periods: the 1880s and the international extension of the “modern research university” model; the 1930s and universities’ attempts to cope with international financial and political crises; the 1960s and universities’ role in an emerging postcolonial international development apparatus; and the 2000s and the rise of neoliberal efforts to reform universities in the name of international economic “competitiveness.” Each of these four periods saw universities adopt new approaches to internationalization in response to major historical-structural changes, and each has clear parallels to today. Among the most important historical-structural challenges that universities confronted were: (1) fluctuating enrollments and funding resources associated with global economic booms and busts; (2) new modes of transportation and communication that facilitated mobility (among students, scholars, and knowledge itself); (3) increasing demands for applied science, technical expertise, and commercial innovation; and (4) ideological reconfigurations accompanying regime changes (e.g., from one internal regime to another, from colonialism to postcolonialism, from the cold war to globalized capitalism, etc.). Like universities today, universities in the past responded to major historical-structural changes by internationalizing: by joining forces across space to meet new expectations and solve problems on an ever-widening scale. Approaches to internationalization have typically built on prior cultural or institutional ties. In general, only when the benefits of existing ties had been exhausted did universities reach out to foreign (or less familiar) partners. As one might expect, this process of “reaching out” has stretched universities’ traditional cultural, political, and/or intellectual bonds and has invariably presented challenges, particularly when national priorities have differed—for example, with respect to curricular programs, governance structures, norms of academic freedom, etc. Strategies of university internationalization that either ignore or downplay cultural, political, or intellectual differences often fail, especially when the pursuit of new international connections is perceived to weaken national ties. If the essays in this collection agree on anything, they agree that approaches to internationalization that seem to “de-nationalize” the university usually do not succeed (at least not for long). Please continue reading the other essays at http://globalhighered.wordpress.com/

  Read the article

• Free Advanced ADF eCourse, part II

  - by Frank Nimphius

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A second part of the advanced Oracle ADF online training is available for free. Lynn Munsinger and her team worked hard to deliver this second part of the training as close to the release of the first installment as possible. This two part advanced ADF training provides you with a wealth of advanced ADF know-how and insight for you to adopt in a self-paced manner. Part 1 (though I am sure you have this bookmarked): http://tinyurl.com/advadf-part1 Part 2 (the new material): http://tinyurl.com/advadf-part2 Quoting Lynn: "This second installment provides you with all you need to know about regions, including best practices for implementing contextual events and other region communication patterns. It also covers the nitty-gritty details of building great looking user interfaces, such as how to work with (not against!) the ADF Faces layout components, how to build page templates and declarative components, and how to skin the application to your organization’s needs. It wraps up with an in-depth look at layout components, and a second helping of additional region considerations if you just can’t get enough. Like the first installment, the content for this course comes from Product Management. This 2nd eCourse compilation is a bit of a “Swan Song” for Patrice Daux, a long-time JDeveloper and ADF curriculum developer, who is retiring the end of this month. Thanks for your efforts, Patrice, and bon voyage!" Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Indeed: Great job Patrice! (and all others involved)

  Read the article

• Proving What You are Worth

  - by Ted Henson

  Here is a challenge for everyone. Just about everyone has been asked to provide or calculate the Return on Investment (ROI), so I will assume everyone has a method they use. The problem with stopping once you have an ROI is that those in the C-Suite probably do not care about the ROI as much as Return on Equity (ROE). Shareholders are mostly concerned with their return on the money the invested. Warren Buffett looks at ROE when deciding whether to make a deal or not. This article will outline how you can add more meaning to your ROI and show how you can potentially enhance the ROE of the company.   First I want to start with a base definition I am using for ROI and ROE. Return on investment (ROI) and return on equity (ROE) are ways to measure management effectiveness, parts of a system of measures that also includes profit margins for profitability, price-to-earnings ratio for valuation, and various debt-to-equity ratios for financial strength. Without a set of evaluation metrics, a company's financial performance cannot be fully examined by investors. ROI and ROE calculate the rate of return on a specific investment and the equity capital respectively, assessing how efficient financial resources have been used. Typically, the best way to improve financial efficiency is to reduce production cost, so that will be the focus. Now that the challenge has been made and items have been defined, let’s go deeper. Most research about implementation stops short at system start-up and seldom addresses post-implementation issues. However, we know implementation is a continuous improvement effort, and continued efforts after system start-up will influence the ultimate success of a system.   Most UPK ROI’s I have seen only include the cost savings in developing the training material. Some will also include savings based on reduced Help Desk calls. Using just those values you get a good ROI. To get an ROE you need to go a little deeper. Typically, the best way to improve financial efficiency is to reduce production cost, which is the purpose of implementing/upgrading an enterprise application. Let’s assume the new system is up and running and all users have been properly trained and are comfortable using the system. You provide senior management with your ROI that justifies the original cost. What you want to do now is develop a good base value to a measure the current efficiency. Using usage tracking you can look for various patterns. For example, you may find that users that are accessing UPK assistance are processing a procedure, such as entering an order, 5 minutes faster than those that don’t.  You do some research and discover each minute saved in processing a claim saves the company one dollar. That translates to the company saving five dollars on every transaction. Assuming 100,000 transactions are performed a year, and all users improve their performance, the company will be saving $500,000 a year. That $500,000 can be re-invested, used to reduce debt or paid to the shareholders.   With continued refinement during the life cycle, you should be able to find ways to reduce cost. These are the type of numbers and productivity gains that senior management and shareholders want to see. Being able to quantify savings and increase productivity may also help when seeking a raise or promotion.

  Read the article

• ReSharper 8.0 EAP now available

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/28/resharper-8.0-eap-now-available.aspxJetbrains have just released |ReSharper 8.0 Beta on their Early Access |Programme at http://www.jetbrains.com/resharper/whatsnew/?utm_source=resharper8b&utm_medium=newsletter&utm_campaign=resharper&utm_content=customersResharper 8.0 comes with the following new features:Support for Visual Studio 2013 Preview. Yes, ReSharper is known to work well with the fresh preview of Visual Studio 2013, and if you have already started digging into it, ReSharper 8.0 Beta is ready for the challenge.Faster code fixes. Thanks to the new Fix in Scope feature, you can choose to batch-fix some of the code issues that ReSharper detects in the scope of a project or the whole solution. Supported fixes include removing unused directives and redundant casts.Project dependency viewer. ReSharper is now able to visualize a project dependency graph for a bird's eye view of dependencies within your solution, all without compiling anything!Multifile templates. ReSharper's file templates can now be expanded to generate more than one file. For instance, this is handy for generating pairs of a main logic class and a class for extensions, or sets of partial files.Navigation improvements. These include a new action called Go to Everything to let you search for a file, type or method name from the same input box; support for line numbers in navigation actions; a new tool window called Assembly Explorer for browsing through assemblies; and two more contextual navigation actions: Navigate to Generic Substitutions and Navigate to Assembly Explorer.New solution-wide refactorings. The set of fresh refactorings is headlined by the highly requested Move Instance Method to move methods between classes without making them static. In addition, there are Inline Parameter and Pull Parameter. Last but not least, we're also introducing 4 new XAML-specific refactorings!Extraordinary XAML support. A plethora of new and improved functionality for all developers working with XAML code includes dedicated grid inspections and quick-fixes; Extract Style, Extract, Move and Inline Resource refactorings; atomic renaming of dependency properties; and a lot more.More accessible code completion. ReSharper 8 makes more of its IntelliSense magic available in automatic completion lists, including extension methods and an option to import a type. We're also introducing double completion which gives you additional completion items when you press the corresponding shortcut for the second time.A new level of extensibility. With the new NuGet-based Extension Manager, discovering, installing and uninstalling ReSharper extensions becomes extremely easy in Visual Studio 2010 and higher. When we say extensions, we mean not only full-fledged plug-ins but also sets of templates or SSR patterns that can now be shared much more easily.CSS support improvements. Smarter usage search for CSS attributes, new CSS-specific code inspections, configurable support for CSS3 and earlier versions, compatibility checks against popular browsers - there's a rough outline of what's new for CSS in ReSharper 8.A command-line version of ReSharper. ReSharper 8 goes beyond Visual Studio: we now provide a free standalone tool with hundreds of ReSharper inspections and additionally a duplicate code finder that you can integrate with your CI server or version control system.Multiple minor improvements in areas such as decompiling and code formatting, as well as support for the Blue Theme introduced in Visual Studio 2012 Update 2.

  Read the article

• Dependency Injection Introduction

  - by MarkPearl

  I recently was going over a great book called “Dependency Injection in .Net” by Mark Seeman. So far I have really enjoyed the book and would recommend anyone looking to get into DI to give it a read. Today I thought I would blog about the first example Mark gives in his book to illustrate some of the benefits that DI provides. The ones he lists are Late binding Extensibility Parallel Development Maintainability Testability To illustrate some of these benefits he gives a HelloWorld example using DI that illustrates some of the basic principles. It goes something like this… class Program { static void Main(string[] args) { var writer = new ConsoleMessageWriter(); var salutation = new Salutation(writer); salutation.Exclaim(); Console.ReadLine(); } } public interface IMessageWriter { void Write(string message); } public class ConsoleMessageWriter : IMessageWriter { public void Write(string message) { Console.WriteLine(message); } } public class Salutation { private readonly IMessageWriter _writer; public Salutation(IMessageWriter writer) { _writer = writer; } public void Exclaim() { _writer.Write("Hello World"); } }   If you had asked me a few years ago if I had thought this was a good approach to solving the HelloWorld problem I would have resounded “No”. How could the above be better than the following…. class Program { static void Main(string[] args) { Console.WriteLine("Hello World"); Console.ReadLine(); } }  Today, my mind-set has changed because of the pain of past programs. So often we can look at a small snippet of code and make judgements when we need to keep in mind that we will most probably be implementing these patterns in projects with hundreds of thousands of lines of code and in projects that we have tests that we don’t want to break and that’s where the first solution outshines the latter. Let’s see if the first example achieves some of the outcomes that were listed as benefits of DI. Could I test the first solution easily? Yes… We could write something like the following using NUnit and RhinoMocks… [TestFixture] public class SalutationTests { [Test] public void ExclaimWillWriteCorrectMessageToMessageWriter() { var writerMock = MockRepository.GenerateMock<IMessageWriter>(); var sut = new Salutation(writerMock); sut.Exclaim(); writerMock.AssertWasCalled(x => x.Write("Hello World")); } }   This would test the existing code fine. Let’s say we then wanted to extend the original solution so that we had a secure message writer. We could write a class like the following… public class SecureMessageWriter : IMessageWriter { private readonly IMessageWriter _writer; private readonly string _secretPassword; public SecureMessageWriter(IMessageWriter writer, string secretPassword) { _writer = writer; _secretPassword = secretPassword; } public void Write(string message) { if (_secretPassword == "Mark") { _writer.Write(message); } else { _writer.Write("Unauthenticated"); } } }   And then extend our implementation of the program as follows… class Program { static void Main(string[] args) { var writer = new SecureMessageWriter(new ConsoleMessageWriter(), "Mark"); var salutation = new Salutation(writer); salutation.Exclaim(); Console.ReadLine(); } }   Our application has now been successfully extended and yet we did very little code change. In addition, our existing tests did not break and we would just need add tests for the extended functionality. Would this approach allow parallel development? Well, I am in two camps on parallel development but with some planning ahead of time it would allow for it as you would simply need to decide on the interface signature and could then have teams develop different sections programming to that interface. So,this was really just a quick intro to some of the basic concepts of DI that Mark introduces very successfully in his book. I am hoping to blog about this further as I continue through the book to list some of the more complex implementations of containers.

  Read the article

• Using Content Analytics for More Effective Engagement

  - by Kellsey Ruppel

  Using Content Analytics for More Effective Engagement: Turning High-Volume Content into Templates for Success By Mitchell Palski, Oracle WebCenter Sales Consultant Many organizations use Oracle WebCenter Portal to develop these basic types of portals: Intranet portals used for collaboration, employee self-service, and company communication Extranet portals used by customers and partners for self-service and support Team collaboration portals that allow users to share documents and content, track activity, and engage in discussions Portals are intended to provide a personalized, single point of interaction with web-based applications and information. The user experiences that a Portal is capable of displaying should be relevant to an individual user or class of users (a group or role). The components of a Portal that would vary based on a user’s identity include: Web content such as images, news articles, and on-screen instruction Social tools such as threaded discussions, polls/surveys, and blogs Document management tools to upload, download, and edit files Web applications that present data visualizations and data entry modules These collections of content, tools, and applications make up valuable workspaces. The challenge that a development team may have is defining which combinations are the most effective for its users. No one wants to create and manage a workspace that goes un-used or (even worse) that is used but is ineffective. Oracle WebCenter Portal provides you with the capabilities to not only rapidly develop variations of portals, but also identify which portals are the most effective and should be re-used throughout an enterprise. Capturing Portal AnalyticsOracle WebCenter Portal provides an analytics service that allows administrators and business users to track and analyze portal usage. These analytics are captured in the form of: Usage tracking metrics Behavior tracking User Profile Correlation The out-of-the-box task reports that come with Oracle WebCenter Portal include: WebCenter Portal Traffic Page Traffic Login Metrics Portlet Traffic Portlet Response Time Portlet Instance Traffic Portlet Instance Response Time Search Metrics Document Metrics Wiki Metrics Blog Metrics Discussion Metrics Portal Traffic Portal Response Time By determining the usage and behavior tracking metrics that are associated with specific user profiles (including groups and roles), your administrators will be able to identify the components of your solution that are the most valuable.  Your first step as an administrator should be to identify the specific pages and/or components are used the most frequently. Next, determine the user(s) or user-group(s) that are accessing those high-use elements of a portal. It is also important to determine patterns in high-usage and see if they correlate to a specific schedule. One of the goals of any development team (especially those that are following Agile methodologies) should be to develop reusable web components to minimize redundant development. Oracle WebCenter Portal provides you the tools to capture the successful workspaces that have already been developed and identified so that they can be reused for similar user demographics. Re-using Successful PortalsWhen creating a new Portal in Oracle WebCenter, developers have the option to base that portal on a template that includes: Pre-seeded data such as pages, tools, user roles, and look-and-feel assets Specific sub-sets of page-layouts, tools, and other resources to standardize what is added to a Portal’s pages Any custom components that your team creates during development cycles Once you have identified a successful workspace and its most valuable components, leverage Oracle WebCenter’s ability to turn that custom portal into a portal template. By creating a template from your already successful portal, you are empowering your enterprise by providing a starting point for future initiatives. Your new projects, new teams, and new web pages can benefit from lessons learned and adjustments that have already been made to optimize user experiences instead of starting from scratch. ***For a complete explanation of how to work with Portal Templates, be sure to read the Fusion Middleware documentation available online.

  Read the article

• Oracle Applications Cloud Release 8 Customization: Your User Interface, Your Text

  - by ultan o'broin

  Introducing the User Interface Text Editor In Oracle Applications Cloud Release 8, there’s an addition to the customization tool set, called the User Interface Text Editor  (UITE). When signed in with an application administrator role, users launch this new editing feature from the Navigator's Tools > Customization > User Interface Text menu option. See how the editor is in there with other customization tools? User Interface Text Editor is launched from the Navigator Customization menu Applications customers need a way to make changes to the text that appears in the UI, without having to initiate an IT project. Business users can now easily change labels on fields, for example. Using a composer and activated sandbox, these users can take advantage of the Oracle Metadata Services (MDS), add a key to a text resource bundle, and then type in their preferred label and its description (as a best practice for further work, I’d recommend always completing that description). Changing a simplified UI field label using Oracle Composer In Release 8, the UITE enables business users to easily change UI text on a much wider basis. As with composers, the UITE requires an activated sandbox where users can make their changes safely, before committing them for others to see. The UITE is used for editing UI text that comes from Oracle ADF resource bundles or from the Message Dictionary (or FND_MESSAGE_% tables, if you’re old enough to remember such things). Functionally, the Message Dictionary is used for the text that appears in business rule-type error, warning or information messages, or as a text source when ADF resource bundles cannot be used. In the UITE, these Message Dictionary texts are referred to as Multi-part Validation Messages.   If the text comes from ADF resource bundles, then it’s categorized as User Interface Text in the UITE. This category refers to the text that appears in embedded help in the UI or in simple error, warning, confirmation, or information messages. The embedded help types used in the application are explained in an Oracle Fusion Applications User Experience (UX) design pattern set. The message types have a UX design pattern set too. Using UITE  The UITE enables users to search and replace text in UI strings using case sensitive options, as well as by type. Users select singular and plural options for text changes, should they apply. Searching and replacing text in the UITE The UITE also provides users with a way to preview and manage changes on an exclusion basis, before committing to the final result. There might, for example, be situations where a phrase or word needs to remain different from how it’s generally used in the application, depending on the context. Previewing replacement text changes. Changes can be excluded where required. Multi-Part Messages The Message Dictionary table architecture has been inherited from Oracle E-Business Suite days. However, there are important differences in the Oracle Applications Cloud version, notably the additional message text components, as explained in the UX Design Patterns. Message Dictionary text has a broad range of uses as indicated, and it can also be reserved for internal application use, for use by PL/SQL and C programs, and so on. Message Dictionary text may even concatenate together at run time, where required. The UITE handles the flexibility of such text architecture by enabling users to drill down on each message and see how it’s constructed in total. That way, users can ensure that any text changes being made are consistent throughout the different message parts. Multi-part (Message Dictionary) message components in the UITE Message Dictionary messages may also use supportability-related numbers, the ones that appear appended to the message text in the application’s UI. However, should you have the requirement to remove these numbers from users' view, the UITE is not the tool for the job. Instead, see my blog about using the Manage Messages UI.

  Read the article

• Editing files without race conditions?

  - by user2569445

  I have a CSV file that needs to be edited by multiple processes at the same time. My question is, how can I do this without introducing race conditions? It's easy to write to the end of the file without race conditions by open(2)ing it in "a" (O_APPEND) mode and simply write to it. Things get more difficult when removing lines from the file. The easiest solution is to read the file into memory, make changes to it, and overwrite it back to the file. If another process writes to it after it is in memory, however, that new data will be lost upon overwriting. To further complicate matters, my platform does not support POSIX record locks, checking for file existence is a race condition waiting to happen, rename(2) replaces the destination file if it exists instead of failing, and editing files in-place leaves empty bytes in it unless the remaining bytes are shifted towards the beginning of the file. My idea for removing a line is this (in pseudocode): filename = "/home/user/somefile"; file = open(filename, "r"); tmp = open(filename+".tmp", "ax") || die("could not create tmp file"); //"a" is O_APPEND, "x" is O_EXCL|O_CREAT while(write(tmp, read(file)); //copy the $file to $file+".new" close(file); //edit tmp file unlink(filename) || die("could not unlink file"); file = open(filename, "wx") || die("another process must have written to the file after we copied it."); //"w" is overwrite, "x" is force file creation while(write(file, read(tmp))); //copy ".tmp" back to the original file unlink(filename+".tmp") || die("could not unlink tmp file"); Or would I be better off with a simple lock file? Appender process: lock = open(filename+".lock", "wx") || die("could not lock file"); file = open(filename, "a"); write(file, "stuff"); close(file); close(lock); unlink(filename+".lock"); Editor process: lock = open(filename+".lock", "wx") || die("could not lock file"); file = open(filename, "rw"); while(contents += read(file)); //edit "contents" write(file, contents); close(file); close(lock); unlink(filename+".lock"); Both of these rely on an additional file that will be left over if a process terminates before unlinking it, causing other processes to refuse to write to the original file. In my opinion, these problems are brought on by the fact that the OS allows multiple writable file descriptors to be opened on the same file at the same time, instead of failing if a writable file descriptor is already open. It seems that O_CREAT|O_EXCL is the closest thing to a real solution for preventing filesystem race conditions, aside from POSIX record locks. Another possible solution is to separate the file into multiple files and directories, so that more granular control can be gained over components (lines, fields) of the file using O_CREAT|O_EXCL. For example, "file/$id/$field" would contain the value of column $field of the line $id. It wouldn't be a CSV file anymore, but it might just work. Yes, I know I should be using a database for this as databases are built to handle these types of problems, but the program is relatively simple and I was hoping to avoid the overhead. So, would any of these patterns work? Is there a better way? Any insight into these kinds of problems would be appreciated.

  Read the article

• GWT - occasional com.google.gwt.user.client.rpc.SerializationException

  - by user214984

  Hello we are haunted by occasional occurences of exceptions such as: com.google.gwt.user.client.rpc.SerializationException: Type 'xxx' was not assignable to 'com.google.gwt.user.client.rpc.IsSerializable' and did not have a custom field serializer.For security purposes, this type will not be serialized.: instance = xxx at com.google.gwt.user.server.rpc.impl.ServerSerializationStreamWriter.serialize(ServerSerializationStreamWriter.java:610) at com.google.gwt.user.client.rpc.impl.AbstractSerializationStreamWriter.writeObject(AbstractSerializationStreamWriter.java:129) at com.google.gwt.user.server.rpc.impl.ServerSerializationStreamWriter$ValueWriter$8.write(ServerSerializationStreamWriter.java:152) at com.google.gwt.user.server.rpc.impl.ServerSerializationStreamWriter.serializeValue(ServerSerializationStreamWriter.java:534) at com.google.gwt.user.server.rpc.RPC.encodeResponse(RPC.java:609) at com.google.gwt.user.server.rpc.RPC.encodeResponseForSuccess(RPC.java:467) at com.google.gwt.user.server.rpc.RPC.invokeAndEncodeResponse(RPC.java:564) at com.google.gwt.user.server.rpc.RemoteServiceServlet.processCall(RemoteServiceServlet.java:188) at de.softconex.travicemanager.server.TraviceManagerServiceImpl.processCall(TraviceManagerServiceImpl.java:615) at com.google.gwt.user.server.rpc.RemoteServiceServlet.processPost(RemoteServiceServlet.java:224) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:710) at javax.servlet.http.HttpServlet.service(HttpServlet.java:803) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175) at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262) at org.apache.coyote.ajp.AjpAprProcessor.process(AjpAprProcessor.java:419) at org.apache.coyote.ajp.AjpAprProtocol$AjpConnectionHandler.process(AjpAprProtocol.java:378) at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1508) at java.lang.Thread.run(Thread.java:619) The application is normally running fine. The indicated class implements Serializable (the whole object graph). So far the only patterns / observations are: we seem to have the issue only when the application is used inside an iframe the problem seems to happen when a new version of the application has been deployed running firefox in privacy mode (disabling all caches etc.) doesn't fix the problem Any ideas? Holger

  Read the article

• "cloud architecture" concepts in a system architecture diagrams

  - by markus

  If you design a distributed application for easy scale-out, or you just want to make use of any of the new “cloud computing” offerings by Amazon, Google or Microsoft, there are some typical concepts or components you usually end up using: distributed blob storage (aka S3) asynchronous, durable message queues (aka SQS) non-Relational-/non-transactional databases (like SimpleDB, Google BigTable, Azure SQL Services) distributed background worker pool load-balanced, edge-service processes handling user requests (often virtualized) distributed caches (like memcached) CDN (content delivery network like Akamai) Now when it comes to design and sketch an architecture that makes use of such patterns, are there any commonly used symbols I could use? Or even a download with some cool Visio stencils? :) It doesn’t have to be a formal system like UML but I think it would be great if there were symbols that everyone knows and understands, like we have commonly used shapes for databases or a documents, for example. I think it would be important to not mix it up with traditional concepts like a normal file system (local or network server/SAN), or a relational database. Simply speaking, I want to be able to draw some conclusions about an application’s scalability or data consistency issues by just looking at the system architecture overview diagram. Update: Thank you very much for your answers. I like the idea of putting a small "cloud symbol" on the traditional symbols. However I leave this thread open just in case someone will find specific symbols (maybe in a book or so) - or uploaded some pimped up Visio stencils ;)

  Read the article

• ANTLR AST rules fail with RewriteEmptyStreamException

  - by Barry Brown

  I have a simple grammar: grammar sample; options { output = AST; } assignment : IDENT ':=' expr ';' ; expr : factor ('*' factor)* ; factor : primary ('+' primary)* ; primary : NUM | '(' expr ')' ; IDENT : ('a'..'z')+ ; NUM : ('0'..'9')+ ; WS : (' '|'\n'|'\t'|'\r')+ {$channel=HIDDEN;} ; Now I want to add some rewrite rules to generate an AST. From what I've read online and in the Language Patterns book, I should be able to modify the grammar like this: assignment : IDENT ':=' expr ';' -> ^(':=' IDENT expr) ; expr : factor ('*' factor)* -> ^('*' factor+) ; factor : primary ('+' primary)* -> ^('+' primary+) ; primary : NUM | '(' expr ')' -> ^(expr) ; But it does not work. Although it compiles fine, when I run the parser I get a RewriteEmptyStreamException error. Here's where things get weird. If I define the pseudo tokens ADD and MULT and use them instead of the tree node literals, it works without error. tokens { ADD; MULT; } expr : factor ('*' factor)* -> ^(MULT factor+) ; factor : primary ('+' primary)* -> ^(ADD primary+) ; Alternatively, if I use the node suffix notation, it also appears to work fine: expr : factor ('*'^ factor)* ; factor : primary ('+'^ primary)* ; Is this discrepancy in behavior a bug?

  Read the article

• django {% tag %} problem

  - by Sevenearths

  I don't know if its me but {% tag ??? %} has bee behaving a bit sporadically round me (django ver 1.2.3). I have the following main.html file: <html> {% include 'main/main_css.html' %} <body> test! <a href="{% url login.views.logout_view %}">logout</a> test! <a href="{% url client.views.client_search_last_name_view %}">logout</a> </body> </html> with the urls.py being: from django.conf.urls.defaults import * import settings from login.views import * from mainapp.views import * from client.views import * # Uncomment the next two lines to enable the admin: from django.contrib import admin admin.autodiscover() urlpatterns = patterns('', # Example: # (r'^weclaim/', include('weclaim.foo.urls')), (r'^login/$', 'login.views.login_view'), (r'^logout/$', 'login.views.logout_view'), (r'^$', 'mainapp.views.main_view'), (r'^client/search/last_name/(A-Za-z)/$', 'client.views.client_search_last_name_view'), #(r'^client/search/post_code/(A-Za-z)/$', 'client.views.client_search_last_name_view'), # Uncomment the next line to enable the admin: (r'^admin/', include(admin.site.urls)), (r'^static/(?P<path>.*)$', 'django.views.static.serve',{'document_root': settings.MEDIA_ROOT}), ) and the views.py for login being: from django.shortcuts import render_to_response, redirect from django.template import RequestContext from django.contrib import auth import mainapp.views def login_view(request): if request.method == 'POST': uname = request.POST.get('username', '') psword = request.POST.get('password', '') user = auth.authenticate(username=uname, password=psword) # if the user logs in and is active if user is not None and user.is_active: auth.login(request, user) return redirect(mainapp.views.main_view) else: return render_to_response('loginpage.html', {'login_failed': '1',}, context_instance=RequestContext(request)) else: return render_to_response('loginpage.html', {'dave': '1',}, context_instance=RequestContext(request)) def logout_view(request): auth.logout(request) return render_to_response('loginpage.html', {'logged_out': '1',}, context_instance=RequestContext(request)) and the views.py for clients being: from django.shortcuts import render_to_response, redirect from django.template import RequestContext import login.views def client_search_last_name_view(request): if request.user.is_authenticated(): return render_to_response('client/client_search_last_name.html', {}, context_instance=RequestContext(request)) else: return redirect(login.views.login_view) Yet when I login it django raises an 'NoReverseMatch' for {% url client.views.client_search_last_name_view %} but not for {% url login.views.logout_view %} Now why would this be?

  Read the article

• CGImageCreateWithMask with an image as a mask

  - by Peyman

  Hi I am trying to use an image (painted as Core Graphics) to create a mask. What I am doing is this 1. creating a Core Graphics path CGContextSaveGState(context); CGContextBeginPath(context); CGContextMoveToPoint(context,circleCenter.x,circleCenter.y); //CGContextSetAllowsAntialiasing(myBitmapContext, YES); CGContextAddArc(context,circleCenter.x, circleCenter.y,circleRadius,startingAngle, endingAngle, 0); // 0 is counterclockwise CGContextClosePath(context); CGContextSetRGBStrokeColor(context,1.0,0.0,0.0,1.0); CGContextSetRGBFillColor(context,1.0,0.0,0.0,0.2); CGContextDrawPath(context, kCGPathFillStroke); 2. then I'm saving the context that has the path just painted CGImageRef pacmanImage = CGBitmapContextCreateImage (context); 3. restoring the context CGContextRestoreGState(context); CGContextSaveGState(context); 4. creating a 1 bit mask (which will provide the black-white mask) bitsPerComponent = 1; bitsPerPixel = bitsPerComponent * 1 ; bytesPerRow = (CGImageGetWidth(imgToMaskRef) * bitsPerPixel); mask = CGImageCreate(CGImageGetWidth(imgToMaskRef), CGImageGetHeight(imgToMaskRef), bitsPerComponent, bitsPerPixel, bytesPerRow, greyColorSpace, kCGImageAlphaNone, CGImageGetDataProvider(pacmanImage), NULL, //decode YES, //shouldInterpolate kCGRenderingIntentDefault); 5. masking the imgToMaskRef (which is a CGImageRef imgToMaskRef =imgToMask.CGImage;) with the mask just created imageMaskedWithImage = CGImageCreateWithMask(imgToMaskRef, mask); CGContextDrawImage(context,imgRectBox, imageMaskedWithImage); CGImageRef maskedImageFinal = CGBitmapContextCreateImage (context); returning the maskedImageFinal to the caller of this method (as wheelChoiceMadeState, which is a CGImageRef) who then updates the CALayer contents property with the image theLayer.contents = (id) wheelChoiceMadeState; the problem I am seeing is that the mask does not work properly and looks very strange indeed. I get strange patterns across the path painted by the Core Graphics. My hunch is there is something with CGImageGetDataProvider() but I am not sure. Any help would be appreciated thank you

  Read the article

• Using Freepascal\Lazarus JSON Libraries

  - by Gizmo_the_Great

  I'm hoping for a bit of a "simpletons" demo\explanation for using Lazarus\Freepascal JSON parsing. I've asked a question here but all the replies are "read this" and none of them are really helping me get a grasp because the examples are bit too in-depth and I'm seeking a very simple example to help me understand how it works. In brief, my program reads an untyped binary file in chunks of 4096 bytes. The raw data then gets converted to ASCII and stored in a string. It then goes through the variable looking for certain patterns, which, it turned out, are JSON data structures. I've currently coded the parsing the hard way using Pos and ExtractANSIString etc. But I'vesince learnt that there are JSON libraries for Lazarus & FPC, namely fcl-json, fpjson, jsonparser, jsonscanner etc. https://bitbucket.org/reiniero/fpctwit/src http://fossies.org/unix/misc/fpcbuild-2.6.0.tar.gz:a/fpcbuild-2.6.0/fpcsrc/packages/fcl-json/src/ http://svn.freepascal.org/cgi-bin/viewvc.cgi/trunk/packages/fcl-json/examples/ However, I still can't quite work out HOW I read my string variable and parse it for JSON data and then access those JSON structures. Can anyone give me a very simple example, to help getting me going? My code so far (without JSON) is something like this: try SourceFile.Position := 0; while TotalBytesRead < SourceFile.Size do begin BytesRead := SourceFile.Read(Buffer,sizeof(Buffer)); inc(TotalBytesRead, BytesRead); StringContent := StripNonAsciiExceptCRLF(Buffer); // A custom function to strip out binary garbage leaving just ASCII readable text if Pos('MySearchValue', StringContent) > 0 then begin // Do the parsing. This is where I need to do the JSON stuff ...

  Read the article

• django+uploadify - don't working

  - by Erico

  Hi, I'm trying to use an example posted on the "github" the link is http://github.com/tstone/django-uploadify. And I'm having trouble getting work. can you help me? I followed step by step, but does not work. Accessing the "URL" / upload / the only thing is that returns "True" part of settings.py import os PROJECT_ROOT_PATH = os.path.dirname(os.path.abspath(file)) MEDIA_ROOT = os.path.join(PROJECT_ROOT_PATH, 'media') TEMPLATE_DIRS = ( os.path.join(PROJECT_ROOT_PATH, 'templates')) urls.py from django.conf.urls.defaults import * from django.conf import settings from teste.uploadify.views import * from django.contrib import admin admin.autodiscover() urlpatterns = patterns('', (r'^admin/', include(admin.site.urls)), url(r'upload/$', upload, name='uploadify_upload'), ) views.py from django.http import HttpResponse import django.dispatch upload_received = django.dispatch.Signal(providing_args=['data']) def upload(request, *args, **kwargs): if request.method == 'POST': if request.FILES: upload_received.send(sender='uploadify', data=request.FILES['Filedata']) return HttpResponse('True') models.py from django.db import models def upload_received_handler(sender, data, **kwargs): if file: new_media = Media.objects.create( file = data, new_upload = True, ) new_media.save() upload_received.connect(upload_received_handler, dispatch_uid='uploadify.media.upload_received') class Media(models.Model): file = models.FileField(upload_to='images/upload/', null=True, blank=True) new_upload = models.BooleanField() uploadify_tags.py from django import template from teste import settings register = template.Library() @register.inclusion_tag('uploadify/multi_file_upload.html', takes_context=True) def multi_file_upload(context, upload_complete_url): """ * filesUploaded - The total number of files uploaded * errors - The total number of errors while uploading * allBytesLoaded - The total number of bytes uploaded * speed - The average speed of all uploaded files """ return { 'upload_complete_url' : upload_complete_url, 'uploadify_path' : settings.UPLOADIFY_PATH, # checar essa linha 'upload_path' : settings.UPLOADIFY_UPLOAD_PATH, } template - uploadify/multi_file_upload.html {% load uploadify_tags }{ multi_file_upload '/media/images/upload/' %} <script type="text/javascript" src="{{ MEDIA_URL }}js/swfobject.js"></script> <script type="text/javascript" src="{{ MEDIA_URL }}js/jquery.uploadify.js"></script> <div id="uploadify" class="multi-file-upload"><input id="fileInput" name="fileInput" type="file" /></div> <script type="text/javascript">// <![CDATA[ $(document).ready(function() { $('#fileInput').uploadify({ 'uploader' : '/media/swf/uploadify.swf', 'script' : '{% url uploadify_upload %}', 'cancelImg' : '/media/images/uploadify-remove.png/', 'auto' : true, 'folder' : '/media/images/upload/', 'multi' : true, 'onAllComplete' : allComplete }); }); function allComplete(event, data) { $('#uploadify').load('{{ upload_complete_url }}', { 'filesUploaded' : data.filesUploaded, 'errorCount' : data.errors, 'allBytesLoaded' : data.allBytesLoaded, 'speed' : data.speed }); // raise custom event $('#uploadify') .trigger('allUploadsComplete', data); } // ]]</script>

  Read the article

• Async.Parallel or Array.Parallel.Map ?

  - by gurteen2

  Hello- I'm trying to implement a pattern I read from Don Syme's blog (http://blogs.msdn.com/dsyme/archive/2010/01/09/async-and-parallel-design-patterns-in-f-parallelizing-cpu-and-i-o-computations.aspx) which suggests that there are opportunities for massive performance improvements from leveraging asynchronous I/O. I am currently trying to take a piece of code that "works" one way, using Array.Parallel.Map, and see if I can somehow achieve the same result using Async.Parallel, but I really don't understand Async.Parallel, and cannot get anything to work. I have a piece of code (simplified below to illustrate the point) that successfully retrieves an array of data for one cusip. (A price series, for example) let getStockData cusip = let D = DataProvider() let arr = D.GetPriceSeries(cusip) return arr let data = Array.Parallel.map (fun x -> getStockData x) stockCusips So this approach contructs an array of arrays, by making a connection over the internet to my data vendor for each stock (which could be as many as 3000) and returns me an array of arrays (1 per stock, with a price series for each one). I admittedly don't understand what goes on underneath Array.Parallel.map, but am wondering if this is a scenario where there are resources wasted under the hood, and it actually could be faster using asynchronous I/O? So to test this out, I have attempted to make this function using asyncs, and I think that the function below follows the pattern in Don Syme's article using the URLs, but it won't compile with "let!". let getStockDataAsync cusip = async { let D = DataProvider() let! arr = D.GetData(cusip) return arr } The error I get is: This expression was expected to have type Async<'a but here has type obj It compiles fine with "let" instead of "let!", but I had thought the whole point was that you need the exclamation point in order for the command to run without blocking a thread. So the first question really is, what's wrong with my syntax above, in getStockDataAsync, and then at a higher level, can anyone offer some additional insight about asychronous I/O and whether the scenario I have presented would benefit from it, making it potentially much, much faster than Array.Parallel.map? Thanks so much.

  Read the article

• model not showing up in django admin.

  - by Zayatzz

  Hi. I have ceated several django apps and stuffs for my own fund and so far everything has been working fine. Now i just created new project (django 1.2.1) and have run into trouble from 1st moments. I created new app - game and new model Game. i created admin.py and put related stuff into it. Ran syncdb and went to check into admin. Model did not show up there. I proceeded to check and doublecheck and read through previous similar threads: http://stackoverflow.com/questions/1839927/registered-models-do-not-show-up-in-admin http://stackoverflow.com/questions/1694259/django-app-not-showing-up-in-admin-interface But as far as i can tell, they dont help me either. Perhaps someone else can point this out for me. models.py in game app: # -*- coding: utf-8 -*- from django.db import models class Game(models.Model): type = models.IntegerField(blank=False, null=False, default=1) teamone = models.CharField(max_length=100, blank=False, null=False) teamtwo = models.CharField(max_length=100, blank=False, null=False) gametime = models.DateTimeField(blank=False, null=False) admin.py in game app: # -*- coding: utf-8 -*- from jalka.game.models import Game from django.contrib import admin class GameAdmin(admin.ModelAdmin): list_display = ['type', 'teamone', 'teamtwo', 'gametime'] admin.site.register(Game, GameAdmin) project settings.py: MIDDLEWARE_CLASSES = ( 'django.middleware.common.CommonMiddleware', 'django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', ) ROOT_URLCONF = 'jalka.urls' TEMPLATE_DIRS = ( "/home/projects/jalka/templates/" ) INSTALLED_APPS = ( 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.admin', 'game', ) urls.py: from django.conf.urls.defaults import * # Uncomment the next two lines to enable the admin: from django.contrib import admin admin.autodiscover() urlpatterns = patterns('', # Example: # (r'^jalka/', include('jalka.foo.urls')), (r'^admin/', include(admin.site.urls)), ) Alan.

  Read the article

• Creating Array of settings names and values using ADO.NET Entities

  - by jordan.baucke

  I'm using an ADO.NET Entities (.edmx) data-model along with MVC2 to build an application. I have a DB table where I want to store settings for method that run elsewhere. MVC2 allows me to create a view, editor, etc. to update this table which is great, but now when I want to do simple assignments based on column titles I'm a bit confused. For example, I would like to easily build an array that I could offset into the record's value based on it's "Title" Column: var entities = new ManagerEntities(); Setting[] settings = entities.settings.ToArray(); This returns something like: Settings[0].[SettingTitle][SettingValue] However, I would like to more easily index into the value than having to loop through all the returned settings, when they're already index. string URL_ID_NEED = [NeededUrl][http://www.url.com] Am I missing something relatively simple? Thanks! ========================= *Update* ========================= Ok, I think I've got a solution, but I'm wondering why this would be so complicated, and if I'm just not thinking of the right context for ADO.NET objects, here's what I did: public string GetSetting(string SettingName) { var entities = new LabelManagerEntities(); IEnumerable<KeyValuePair<string, object>> entityKeyValues = new KeyValuePair<string, object>[] { new KeyValuePair<string, object>("SettingTitle", SettingName) }; EntityKey key = new EntityKey("LabelManagerEntities.Settings", entityKeyValues); // Get the object from the context or the persisted store by its key. Setting settingvalue = (Setting)entities.GetObjectByKey(key); return settingvalue.SettingValue.ToString(); } This method handles the job of querying the Entities by "Key" to get back the correct value as a returned string (which I can than strip out the " ", or or cast to an integer, etc. etc.,) Am I just duplicating functionality that already exists in ADO.NET's design patterns (I'm pretty new to it) -- or is this a reasonable solution?

  Read the article

• How to arrange models, views, controllers in a new Kohana 3 project

  - by Pekka

  I'm looking at how to set up a mid-sized web application with Kohana 3. I have implemented MVC patterns in the past but never worked against a "formalized" MVC framework so I'm still getting my head around the terminology - toying around with basic examples, building views and templates, and so on. I'm progressing fairly well but I want to set up a real-world web project (one of my own that I've been planning for quite some time now) as a learning object. Example-based documentation is a bit sparse for Kohana 3 right now - they say so themselves on the site. While I'm not worried about learning the framework soon enough, I'm a bit at a loss on how to arrange a healthy code base from the start - i.e. how to split up controllers, how to name them, and how to separate the functionality into the appropriate models. My application could, in its core, be described as a business directory with a main businesses table. Businesses can be listed by category and by street name. Each business has a detail page. Business owners can log in and edit their business's entry. Businesses can post offers into an offers table. I know this is pretty vague, I'll be more than happy to go into more detail on request. Supposing I have all the basic functionality worked out and in place already - list all businesses, edit business, list businesses by street name, create offer, and so on, and I'm just looking for how to fit the functionality into a Kohana application structure that can be easily extended: Do you know real-life, publicly accessible examples of applications built on Kohana 3 where I could take a peek how they do it? Are there conventions or best practices on how to structure an extendable login area for end users in a Kohana project that is not only able to handle a business directory page, but further products on separate pages as well? Do you know application structuring HOWTOs or best practices for Kohana 3 not mentioned in the user guide and the inofficial Wiki? Have you built something similar and could give me some recommendations?

  Read the article

• Looking for ideas for a simple pattern matching algorithm to run on a microcontroller

  - by pic_audio

  I'm working on a project to recognize simple audio patterns. I have two data sets, each made up of between 4 and 32 note/duration pairs. One set is predefined, the other is from an incoming data stream. The length of the two strongly correlated data sets is often different, but roughly the same "shape". My goal is to come up with some sort of ranking as to how well the two data sets correlate/match. I have converted the incoming frequencies to pitch and shifted the incoming data stream's pitch so that it's average pitch matches that of the predefined data set. I also stretch/compress the incoming data set's durations to match the overall duration of the predefined set. Here are two graphical examples of data that should be ranked as strongly correlated: http://s2.postimage.org/FVeG0-ee3c23ecc094a55b15e538c3a0d83dd5.gif (Sorry, as a new user I couldn't directly post images) I'm doing this on a 8-bit microcontroller so resources are minimal. Speed is less an issue, a second or two of processing isn't a deal breaker. It wouldn't surprise me if there is an obvious solution, I've just been staring at the problem too long. Any ideas? Thanks in advance...

  Read the article

• To GAC, or not to GAC?

  - by Jagd

  I have a data access layer (DAL) that is written in ASP.NET 3.5 and uses the Microsoft patterns & practices libraries (hereafter referred to as P&P) in order to accomplish its data access. I installed P&P and it resides in my GAC, so, logically, my DAL references it in the GAC. Therefore, the P&P libraries are never pulled down to the bin folder of my DAL. I use this DAL project in at least five (more than that even, but I'm too lazy to try to count them all) different websites. And this has all worked just fine for me because I'm the only developer who works on these websites. But, now I have other developers who are going to work on some of these websites. The problem: if a developer pulls the DAL project down from our code repository, it won't build for them if they don't have the P&P libraries installed. My question: should I expect the developers to install the P&P libraries, or should I just dump them in the bin folder and be done with it? I realize that dumping them into the bin folder is probably the easiest way to deal with the problem, but I've never been a big fan of the bin folder if I can reference them in the GAC instead.

  Read the article

• Database structure - is mySQL the right choice?

  - by Industrial

  Hi everyone, We are currently planning the database structure of a quite complex e-commerce web app that has flexibility as it's main cornerstone. Our app features a large amount of data (products) and we have run into a slight headache trying to keep performance high without compromizing normalization rules in the database, or leaving our highly beloved flexibility concept behind when integrating product options (also widely known as product attributes or parameters). Based on various references and sources available, we have made up lists on pros and cons of all major and well known database patterns to solve this. After comparing these, we have come up with two final alternatives: EAV (Entity-attribute-value model) : Pros: Database is used for all sorting. Cons: All related queries will include a number of joins between multiple tables in order to complete the collection of data. SLOB (Serialized LOB, also known as Facade?) : Pros: Very flexible. Keeping the number of necessary joins low compared to a EAV design pattern. Easy to update/add/remove data from each product. Cons: All sorting will be done by the application instead of the database. Will use lots of performance (memory?) when big datasets is processed by a large number of users. Our main questions: Which pattern/structure would you use, or maybe even a different solution? Is there better databases besides mySQL available nowadays to accomplish what we want? Thanks a lot! Reference: http://stackoverflow.com/questions/695752/product-table-many-kinds-of-product-each-product-has-many-parameters

  Read the article

• Applying business logic to form elements in ASP.NET MVC

  - by Brettski

  I am looking for best practices in applying business logic to form elements in an ASP.NET MVC application. I assume the concepts would apply to most MVC patterns. The goal is to have all the business logic stem from the same place. I have a basic form with four elements: Textbox: for entering data Checkbox: for staff approval Checkbox: for client approval Button: for submitting form The textbox and two check boxes are fields in a database accessed using LINQ to SQL. What I want to do is put logic around the check boxes on who can check them and when. True table (little silly but it's an example): when checked || may check Staff || may check Client Staff | Client || Staff | Client || Staff | Client 0 0 || 1 0 0 1 0 1 || 0 0 0 1 1 0 || 1 0 0 1 1 1 || 0 0 0 1 There are to security roles, staff and client; a person's role determines who they are, the roles are maintained in the database alone with current state of the check boxes. So I can simply store the users roll in the view class and enable and disable check boxes based on their role, but this doesn't seem proper. That is putting logic in UI to control of which actions can be taken. How do I get most of this control down into the model? I mean I need to control which check boxes are enabled and then check the results in the model when the form is posted, so it seems the best place for it to originate. I am looking for a good approach to constructing this, something to follow as I build the application. If you know of some great references which explain these best practices that is really appreciated too.

  Read the article

• Taking "do the simplest thing that could possible work" too far in TDD: testing for a file-name kno

  - by Support - multilanguage SO

  For TDD you have to Create a test that fail Do the simplest thing that could possible work to pass the test Add more variants of the test and repeat Refactor when a pattern emerge With this approach you're supposing to cover all the cases ( that comes to my mind at least) but I'm wonder if am I being too strict here and if it is possible to "think ahead" some scenarios instead of simple discover them. For instance, I'm processing a file and if it doesn't conform to a certain format I am to throw an InvalidFormatException So my first test was: @Test void testFormat(){ // empty doesn't do anything nor throw anything processor.validate("empty.txt"); try { processor.validate("invalid.txt"); assert false: "Should have thrown InvalidFormatException"; } catch( InvalidFormatException ife ) { assert "Invalid format".equals( ife.getMessage() ); } } I run it and it fails because it doesn't throw an exception. So the next thing that comes to my mind is: "Do the simplest thing that could possible work", so I : public void validate( String fileName ) throws InvalidFormatException { if(fileName.equals("invalid.txt") { throw new InvalidFormatException("Invalid format"); } } Doh!! ( although the real code is a bit more complicated, I found my self doing something like this several times ) I know that I have to eventually add another file name and other test that would make this approach impractical and that would force me to refactor to something that makes sense ( which if I understood correctly is the point of TDD, to discover the patterns the usage unveils ) but: Q: am I taking too literal the "Do the simplest thing..." stuff?

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >