Search Results

Search found 3994 results on 160 pages for 'dual wan'.

Page 116/160 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• Function key emulator for Dell inspiron 6400 on external keyboard

  - by hardik988

  I have a 3 year old Dell inspiron 6400 with windows 7 and ubuntu 9.10 dual boot. I messed up my Laptop keyboard and hence my Fn key is not working and I need it to activate the wireless whose activation combination is Fn+F2. Is there any way I can emulate the Fn key or get my wireless to start in windows or ubuntu ? My bios has an option for Fn key emulation but that only supports external PS/2 keyboards and my laptop doesn't have a ps/2 slot. Any ideas would be appreciated ..

  Read the article

• Wireless router setup for 1-1 NAT

  - by Carlos

  What I have: A linksys router WAG160N with firmware version 2 A "pool" of 5 external static IP's provided by my ISP 213.xx.xxx.n All the required configuration values for the static IPs such as (Subnet Mask, Gateway and static DNS 1, 2, 3) Current WAN Configuration: Encapsulation: RFC 2364 PPPoA Multiplexing: VC QoS type: UBR DSL modulation: MultiMode What's connected to the network: 1 x Server (That I want to make available to the outside) 5 x Desktops with static internal IP's, such as 192.168.0.xx 2 x Network printers, also with internal static IP's 2 x Laptops 1 x NAS (Network Attached Storage) also on static IP What I want to do: I would like to make the server available from outside the network, for example from your house. The problem is that Im not really sure how to do this. I have tried following the steps on the instruction manual in Linksys but they do not seem to work, once I set it up as shown bellow, I loose internet and all hell breaks loose. Going into further detail, I would prefer if the network is changed as little as possible, by this I mean that all the computers stay networked within eachother and only the server is accessible from the outside the network. What I need HELP with: I have read around that it is possible to set a 1-1 NAT (I know where it is in the menu but have no clue what it does...) so that I can NAT a single public IP directly to a single private IP (in our case the server). But please, How do I do that? Or maybe an alternative?

  Read the article

• need advice for storing data setup hardware for client with 80TB per year of data footprint increase

  - by dasko

  hi everyone, i currently have a client that will be adding replicated data from satellite locations in the number of approximately 80TB per year. with this said in year 2 we will have 160TB and so on year after year. i want to do some sort of raid 10 or raid 6 setup. i want to keep the servers to approximately 4u high and rack mounted. all suggestions welcome on a replication strategy. we will be wanting to have one instance of the data in house and the other to be co-located (any suggestions on co-locate sites too?). the obvious hardware will be something like a rack mount server with hot swap trays and dual xeon based type processors. the use of the data is for archives of information, files will be made up of small file sizes. i can add or expand to this question if it is too vague. thanks for looking.

  Read the article

• Having problems VPN'ing into our Windows server network.

  - by Pure.Krome

  Hi folks, When two people (on their notebooks) try to VPN to our office, only the first user gets a connection. the second user always times out. Is it possible for VPN to allow two or more people, using / sharing the same EXTERNAL PUBLIC IP to connect/authenticate? Now for some specifics (cause those two statements are very broad). I'm not in the IT Dept. I'm a developer. Our IT Dept don't really care (sigh) so it's up to me to fix this crap. Our office is all Microsoft shop stuff - servers and clients. We also have a firewall (watchguard brand?) and some other crazy setups (yes i know, it's very vague :( ). So i'm wondering - is it possible for multiple users, from the same public IP, to connect via VPN to a windows server? i'm under the impression - yes. But it is possible that this only happens when the clients (who are all behind the single, public IP .. otherwise they will have their OWN ip's) need to have UPnP running or something? this is killing me and i need to start asking the right questions cause these guys don't know what they are doing and i can't work without this happening. I know this is a vauge question with so many 'if-what's-etc' but maybe some questions/suggestions from you guys might start to lead to solving this problem. EDIT: Network Connection: WAN Miniport (PPTP)

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• How to understand cpu family/model/stepping fields in /proc/cpuinfo

  - by Victor Sorokin

  I have following in cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 107 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping : 2 According to Wikipedia page there are two kinds of 5600+ -- one of 90nm technology, another of 65nm. How can I understand which one I have? There seem to be no direct correspondence between contents of cpuinfo and info on Wikipedia page. AMD site seems to use some other naming scheme for processors too. How can I map values of family, model and stepping from cpuinfo to the data available on Wikipedia/AMD?

  Read the article

• why is there so much variance in prices for a 2-bay NAS?

  - by jcollum

  I'm considering buying a 2bay NAS for media storage. I'm perplexed by the variety of prices. They go from about $115 to $1200. The only thing I could see that differentiated the high end drive was encryption and a dual gigabit ethernet port. I don't understand how that can add up to $800+ dollars. Clearly I should know why there's this price variance before considering buying a 2 Bay NAS. Newegg link to 2 Bay NAS Should I move this question to serverfault?

  Read the article

• How can I know I'm buying a heatsink that will work with my CPU?

  - by Mike Peshka

  Recently I've been using my CPU a lot more for gaming, and as of two days ago, my computer had just been shutting off suddenly with no warning. I'm inclined to believe I need a new heatsink and cooling fan system. (Correct me if I am wrong.) Now I went around to BestBuy and Staples to purchase a new one, but both places instructed me to look online. Now I am posed with a problem. I don't know how to shop for one online because I want to make sure it will work with my unit. My CPU is a Pentium® Dual-Core CPU E2210 @ 2. 20GHz

  Read the article

• What hash should be used to ensure file integrity?

  - by Corey Ogburn

  It's no secret that large files offered up for download often are coupled with their MD5 or SHA-1 hash so that after you download you can verify the file's integrity. Are these still the best algorithms to use for this? Obviously these are very popular hashes that potential downloaders would have easy access to. Ignoring that factor, what hashes have the best properties for being used for this? For example, bcrypt would be horrible for this. It's designed to be slow. That would suck to use on your 7.4 GB dual layer OS ISO you just downloaded when a 12 letter password might take up to a second with the right parameters.

  Read the article

• Strange sound from Laptop, Microphone, Speakers or Soundcard?

  - by David Schilling

  I have recently purchased a second hand computer. There didn't seem to be anything wrong with it on purchasing, however recently I have noticed a small issue. Any time I play sound or listen through my headphones, I can hear what seems to be the CPU working (ie when beginning a new task, there is a small crackling). Also if I tap my laptop I can hear the sound louder, as if it is being picked up by the mic and then playing that sound in real time through the speakers or headphones. I have tried reading other topics but cannot find an answer to this question. These are the specs I am running on; Windows 7 Home Premium 32bit Pentium Dual Core CPU T4300 @ 2.10Ghz 2.10Ghz I hope someone can help me with this issue, it would be much appreciated.

  Read the article

• Router vs switch in a LAN [closed]

  - by servernewbie

  If I have a LAN and and connect it with a switch, I understand it uses a CAM table to route packets in layer 2 (by saving mac to port relations). So far all good. However, when using a router for a LAN (ONLY for a LAN, not to connect it to "the outside" WAN/internet/etc) I get a bit confused as to how it internally processes packets. I would first split this into two router scenarios: Router with buit-in switch In this scenario, I would expect that it will act exactly as a switch with a CAM table internally. This would probably benefit a bit in speed (guessing here?) compared to the next option. Router without built-in switch Here is where I get confused. If hostA wants to send a packet to hostB, it will ARP to find hostB's MAC address and send it there. Now, if we had a switch (above scenario) this would be easy. But how does it work now in a router WITHOUT a switch? If I would guess, hostA would send an Ethernet frame with hostB's MAC address to the line. The router would fetch the packet (even though the router has another MAC address, it would still fetch this packet even if it only contains hostB's MAC address). It would strip the Ethernet frame header and check the IP, and then check its own internal ARP table again for the MAC address. Now, this would seem like a waste of resources compared to a router with a built-in switch. But maybe it does not work like that at all. Does it also contain a CAM table? If that would be true, what would then the difference between these two routers really be?

  Read the article

• Moving data to lower sectors on an SSD without defragging

  - by David Freitag

  I bought an Intel SSD drive a while back and now I want to dual-boot with it. But for some reason there are sectors near the end of the drive filled and I can’t seem to find a way to remove the data so that I can safely shrink the partition. I know I have sectors near the end full because I am using Defraggler to analyze my drive (not to defrag it). I can see what files need to be moved/deleted but short of actually deleting some drivers and/or other necessary files, I am completely stuck. This the diskmap: I am only able to shave off that last 1.72GB of space from the drive which isn’t even enough for the most minimal Linux install.

  Read the article

• Why are ISP's installing routers on my site when the feed is a form of ethernet already?

  - by Cosmin Prund

  I'm connected to 3 ISP's right now. Two of them already have routers at my site, the third one announced me "they need to install some equipment" when I requested BGP session. I can only assume they need to install a Router, since that connection is now working fine, using the usual /30 net block for the connection, and the "last-mile" solution is not going to change since they only installed it last week and the BGP was in the contract from the beginning. I simply don't understand this: the "feed" is already a form of ethernet. Even those they're using different technologies for the last mile, they're all entering the ISP router using an RJ45 WAN port. I assume the ISP router does something really important that can't be done by the Big Router on the other end of the connection. It must also be something that can hurt them if miss-configured, since they don't trust us (the client) to do the stuff on our router. And I'm not talking cheap throw-away routers here: One of the routers is Cisco 2800. Edit to add network details: I'm connected to 3 ISP's, two over Radio links, one over Fiber Optic. One of the radio links is going to get dropped and the other radio link will be turned into fiber sometime next year. The fiber is 20 Mbit, radio 1 is 40 Mbit and radio 2 is 2 Mbit. I've got a /24 of provider independent address space. I'm not doing out-of-the ordinary stuff with my network, I'm overly connected because my network needs to be "up" all the time.

  Read the article

• Can Autodesk Flame run with an nVidia Quadro FX3800 SDI and output to preview through SDI???

  - by cragno

  I am running on Linux RHEL 4.3, DKU 5.0.1. Everything seems to be ok on the xorg.conf and init.cfg, but when I start my projects and Flame enables output to preview I start having preview on my SDI monitor and stop seeing on my main monitor (which is connected to the DisplayPort). Could it be posible that Flame needs Quadro FX4x00/5x00 series with dual DVI to output both monitors?? Cause the FX3800 has only one DVi (which is connected to the SDI card) and 2 DisplayPorts as additional output monitors. Anyone knows a config or workaround this problem?? Thanks ahead!!!

  Read the article

• Connecting/Adding a private network on windows server 2008

  - by WhyMe

  Hey all, I have a dual server configuration on a host provider using VPS. I was told by my Host provider that in order to use free bandwidth between my two servers (they are in the same location) I need to add a alias "subnet" to a specific ip (A private network, VPN). How do I add an aliased ip in widnwos? in Linux the relevant command is supposed to be (By my search in blogs) "ifconfig eth0:1 10.129.175.165 netmask 255.255.255.0" They also said that another way to connect between the servers (should also be faster) is to use "private lan", but as it happens I don't know how to define one :(. Is there a windows equivalent or another way to do this? I have checked my ip config and found no indication of the private lan or the VPN ip.

  Read the article

• What is a good router linux distro and WHY?

  - by madmaze

  I have a rather large home network with many clients. Ive decided I want to build a Linux based router, I have an 1.6Ghz dual-core(atom) system kicking around which will be re-purposed. So ive looked at a bunch of specific router distros but cant decide. I have also looked into taking a Ubuntu server or FreeBSD install and adding needed packages. So question is, what is the best router-Linux or base Linux distro and why? resources appreciated.

  Read the article

• Cisco Catalyst 3550 + Alteon 184 Load-Balancing Issues

  - by upkels

  I have just deployed a couple Cisco Catalyst 3550 switches, and a couple Alteon 184 Web Switches for load-balancing. I can ping all RIPs and VIPs to/from the Alteon. Topology Before: (server) <- (Alteon) <- (Internet) Topology Now: (server) <- (3550) <- Alteon <- (Internet) Cisco Port Configuration (Alteon Uplink Port): description LB_1_PORT_9_PRIMARY switchport access vlan 10 switchport mode access switchport nonegotiate speed 100 duplex full Alteon Port 9 Configuration (VLAN 10 WAN): >> Main# /c/port 9/cur Current Port 9 configuration: enabled pref fast, backup gig, PVID 10, BW Contract 1024 name UPLINK >> Main# /c/port 9/fast/cur Current Port 9 Fast link configuration: speed 100, mode full duplex, fctl none, auto off Cisco Configuration (Load-Balanced Servers Port): description LB_1_PORT_1_PRIMARY switchport access vlan 30 switchport mode access switchport nonegotiate speed 100 duplex full Alteon Port 1 Configuration (VLAN 30 LOAD-BALANCED LAN): >> Main# /c/port 1/cur Current Port 1 configuration: enabled pref fast, backup gig, PVID 30, BW Contract 1024 name LB_PORT_1 >> Main# /c/port 1/fast/cur Current Port 1 Fast link configuration: speed 100, mode full duplex, fctl both, auto on Each of my servers are on vlan 10 and 30, properly communicating. I have tried to turn on VLAN tagging on the Alteon, however it seems to cause all communications to stop working. When I tcpdump -i vlan30 on any of the webservers, I see normal ARP communications, and some STP communications, which may or may not be part of the problem: ... 15:00:51.035882 STP 802.1d, Config, Flags [none], bridge-id 801e.00:11:5c:62:fe:80.8041, length 42 15:00:51.493154 IP 10.1.1.254.33923 > 10.1.1.1.http: Flags [S], seq 707324510, win 8760, options [mss 1460], length 0 15:00:51.493336 IP 10.1.1.1.http > 10.1.1.254.33923: Flags [S.], seq 3981707623, ack 707324511, win 65535, options [mss 1460], len gth 0 15:00:51.493778 ARP, Request who-has 10.1.3.1 tell 10.1.3.254, length 46 etc... I'm not sure if I've provided enough information, so please let me know if any more is necessary. Thank you!

  Read the article

• very slow internet with Linksys WRT54GL only in wireless mode (wired is OK)

  - by gojira

  I bought a new Cisco Linksys WRT54GL router to connect my laptop (running Windows 7) to the internet. I installed Tomato 1.28 firmware on the router. When I connect the laptop to the router via ethernet cable, everything is fine and I get extremely fast up- and download speeds. When I connect wirelesssly however, websites load extremely slow - it takes dozens of seconds to load a website! <-- This is my question, how can I fix the wireless speed issue? Gmail for example is unusable this way. I tried speedtest.net, but this always fails in the upload part of the test so I can't even test the bandwidth (could the fact that it fails in the upload part, not the download part, be an indication what the problem is?!). I have isolated the problem a bit, I am convinced it has to do either with the router itself, the router settings, or the settings of the wireless connection in Win 7. Because previously, I was using another router by Buffalo and I had no problems whatsoever. I have tried to reproduce the settings from the Bufallo router as closely as possible on the Linksys router (same channel, same encryption etc). The download speed problem only occurs with the Linksys router, and only in wireless mode! When I exchange the Linksys router with the Buffalo router I have here for testing, the wireless speed is up to normal again. Also, before I had installed the Tomato firmware I had exactly the same problem, so it has nothing to do with the firmware itself. Notes & things I already tried: Changing the channel: does not seem to affect anything, I am also on the same channel (10) which I was previously on when I had a Buffalo router. QoS is off. Ping to the router itself is OK, ~ 1 ms. Some current settings of the linksys router: WAN / Internet Type: DHCP Wirelesss Mode: Access Point B/G Mode: Mixed Broadcast: check Channel: 10 - 2.457 GHz Security: WPA2 Personal Encryption: AES

  Read the article

• HD read error while booting linux

  - by sidharth sharma

  I have been dual booting windows 7 and ubuntu on my laptop since the past 3 years and all was working fine until I started getting logs like ata1.00: status: { DRDY ERR } ata1.00: error: { UNC } ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense key: Medium Error [Current][discreptor] I figured it was a hardware problem and ignored it as long as I could until the HD crashed on me. Then I got a brand new HD and put on windows and ubuntu afresh on it but the problem still persists. Any Help?

  Read the article

• What is the specific advantage of a blade server for virtualisation?

  - by ChrisZZ

  We are planning to implement a VDI Solution. We had some discussions about Blade vs Rack. As we are only planning to implement 75-100 Clients, we calculated, that we would need 2 Servers with Dual 8C Processors - and a shared storage server. This calculation is based on a paper by ORACLE, that says, 12 active virtual machines per core. Now, for buying to servers, a blade does not scale financially. But the Blade has some other advantages: a) The interconnectivity between the blades is super-fast. b) IO Virtualisation Are there other advantages, that we should consider, that would make up for price - and are this advantages so important, that we should think about investing in the blade?

  Read the article

• Does anyone know how to "tcpdump" traffic decrypted by Mallory MITM? [migrated]

  - by chriv

  I'm looking for some help in capturing network traffic that I can analyze in Wireshare (or other tools). The tool I'm using is mallory. If anyone is familiar with mallory, I could use some help. I've got it configured and running correctly, but I don't know how to get the output that I want. The setup is on my private network. I have a VM (running Ubuntu 12.04 - precise) with two NICs: eth0 is on my "real" network eth1 is only on my "fake" network, and is using dnsmasq (for DNS and DHCP for other devices on the "fake" network) Effectively eth0 is the "WAN" on my VM, and eth1 is the "LAN" on my VM. I've setup mallory and iptables to intercept, decrypt, encrypt and rewrite all traffic coming in on destination port 443 on eth1. On the device I want intercepted, I have imported the ca.cer that mallory generated as a trusted root certificate. I need to analyze some strange behavior in the HTTPS stream between the client and server, so that's why mallory is setup in between for this MITM. I would like to take the decrypted HTTPS traffic and dump it to either a logfile or a socket in a format compatible with tcpdump/wireshark (so I can collect it later and analyze it). Running tcpdump on eth1 is too soon (it's encrypted), and running tcpdump on eth2 is too late (it's been re-encrypted). Is there a way to make mallory "tcpdump" the decrypted traffic (in both directions)?

  Read the article

• Is there an application that can automatically set Graphics Properties when docking?

  - by Ken Liu

  I have a dual display setup with my laptop (Dell, with integrated graphics, WinXP). The problem is that whenever I hook up the laptop to the monitor I have to go to Graphics Properties (Intel Graphics Media Driver for Mobile) and set the display resolution, window position, etc. Note that this screen is different than the built-in one you usually see in WinXP. 1) Is there an app that can save display settings properly so they will come back when I dock again? 2) Barring this, run a script or a macro to automatically set up the display the way I want it. 3) Or, can I write a .Net program that does this for me? Extra points if there is an Open source app that can do this.

  Read the article

• Moving Microsoft Exchange server to the private network.

  - by Alexey Shatygin

  In one of the offices, we have a 50-computers network, which had only one server machine: Windows 2003 Server Microsoft ISA Server Microsoft Exchange 2003 This server worked as a gateway (proxy server), mail server, file server, firewall and domain controller. It had two network interfaces, one for WAN (let's say 222.222.222.222) and one for LAN (192.168.1.1). I set up a Linux box to be the gateway (without a proxy), so the Linux box now has the following interfaces: 222.222.222.222 (our external IP, we removed it from the Windows machine) and 192.168.1.100 (internal IP), but we need to keep the old Windows server as a mail server and a proxy for some of our users, until we prepare another Linux machine for that, so I need the mail server on that machine to be available from the Internet. I set up iptables rules to redirect all the incoming connections on the 25th and 110th ports of our external IP to 192.168.1.1:25 and 192.168.1.1:110 and when I try to telnet our SMTP service telnet 222.222.222.222 25 I get the greetings from our windows server's (192.168.1.1) SMTP service, and that's works fine. But when I telnet POP3 service telnet 222.222.222.222 110 I only get the blank black screen and the connection seem to disappear if I press any button. I've checked the ISA rules - everything seems to be the same for 110th and 25th ports. When I telnet on 110th ports of our Windows server from our new gateway machine like this: telnet 192.168.1.1 110 I get the acces to it's POP3 service: +OK Microsoft Exchange Server 2003 POP3 server version 6.5.7638.1 (...) ready. What sould I do, to make the POP3 service available through our new gateway?

  Read the article

• IBM Server searching for secondary server

  - by user1241438

  I just bought the following server IBM System x3950 Server, 4 x 3.0GHz Dual Core, 32GB, 6 x 73.4GB 10K SAS RAID, 256MB BBWC, 2x Power, CD-RW/DVD When i boot it up, it says "Searching for secondary server" and hangs their for almost 10 mins. After 10 mins, it says timeout on searching chassis 2. But after this it proceed to boot the OS properly. But my frustration, i need to wait for almost 15 mins to boot everytime. How do i prevent this error message.

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >