Search Results

Search found 16386 results on 656 pages for 'flash drive'.

Page 116/656 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• How to set CHKDSK for drive C: in Windows 7

  - by prashanth

  I recently got a 0xc000007b error whenever I tried to run some application software. I found that CHKDSK for C drive might be a solution. When I tried to do it from C drive properties, it said the drive was in use and asked to schedule CHKDSK at the next reboot. I clicked OK. When I restart, I experience a BSOD. I waited for 10 minutes but still nothing happens. So I forced a shutdown (laptop) and again booted up the computer and got a BSOD for just 5 or 10 seconds and system boots and works with no problem. I repeated all these steps four or four times and yet with the same results. Is there any other way other than CHKDSK to solve the 0xc000007b error? If not, why is CHKDSK not working at boot up? Can I force CHKDSK on drive C: to perform while the system is on? Platform: Windows 7 64-bit.

  Read the article

• DVD drive won't work after installing software

  - by Dan

  DVD drive was already region-free but for some reason would not play a certain DVD as it was the "wrong region". This is the first time I've played a DVD on the drive, but I've imported a lot of CDs before and they always worked fine, even CDs bought from the USA (I live in the UK). To get around this, I downloaded a piece of software called "DVD Region Killer". (Clicking the link won't start the download, so go ahead and check it.) After this, the drive isn't recognised. It won't show up in "My Computer", and when I insert a disc it will start to whir but not take action, i.e. iTunes won't recognise that I have put a CD in. In the Device Manager, the drive shows up with a caution-sign. The device status reads: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Disabling, uninstalling and reinstalling does not help. Clearly the software download is the issue, but it is difficult to remove. The only files I can find in Program Files are: C:\Program Files (x86)\Elaborate Bytes\DVD Region Killer which contains a changelog and a HTML document which has no info on uninstalling. It doesn't show up on "Add or Remove Programs", or even as a background process when I press ctrl-alt-del. Apparently it has no interface as such, and can be accessed by an icon in the system tray, (see review in link) but I don't see the icon. If it helps to know, I have a Dell Inspiron running Windows 8 64-bit, and the model of the DVD drive is: MATSHITA DVD+-RW UJ8C2 Thanks in advance.

  Read the article

• Command line: Map network drive

  - by Seb Nilsson

  How do I write a command line in a .bat or .cmd that maps a network drive? I want the script to first check if the drive-letter is mapped, and if it is delete it and then map the drive. I only have the mapping-command right now. Please help me fill in the blanks: REM Check if drive exists, if it does, delete it @echo off net use q: /persistent:yes \\localhost\C$\MyFolder pause Are there any of the parameters wrong? Any that should be added?

  Read the article

• I/O Error on LG GSA-H12N DVD drive on Windows 7

  - by Ashwin

  I am facing an I/O Error when I try to burn DVD data discs on my LG GSA-H12N DVD drive on Windows 7. Note that I was able to do this same operation on the same hardware/software just a day earlier without any problems, but with Windows XP. The only change (AFAIK) has been the installation of Windows 7 to replace Windows XP on this PC. Here is the error I get when I try to burn a DVD data disc using CDBurnerXP 4.2.7.1801: Burning error occured An error occured while burning the disc. Most likely the disc is not usable. Usually these errors happen if the inserted media is not compatible to the drive or of poor quality. (devNTSPTI_IO_Error) Could not write to Disc (LBA: 52864 Length: 32). SCSI Pass-through Interface I/O Error. - 0xFF045D Note that there can be no problem with the discs since I have been using the same discs (from the same box) just before the Windows 7 installation with no problems. The only change has been Windows 7. I tried InfraRecorder v0.5 and ImgBurn v2.5 and got similar I/O errors: Note that Windows 7 lists the LG GSA-H21N drive as being compatible (see this link). I also checked the LG Drivers website and using the firware update from there updated the drive firmware from version UL01 to UL02. But, even this has not helped. The drive reads DVDs without any problem, but continues to produce coasters. Could someone help me figure out what is the problem? Thanks :)

  Read the article

• Page File - Why set one for each drive?

  - by Magic

  Hello, I have Windows Vista Business Edition running on my laptop (brand is HCL). I have 4 HDD which are as follows - C - 29.2 GB (of which only 3.68 GB is free) D - 39 GB (of which 37.8 GB is free) E - 39 GB (of which 37.3 GB is free) F - 41.6 (of which 41.4 GB is free) However, my page file settings are as below. Automatically manage paging file for all drives. Question - Why should I set one for each drive? Should I set my page file on the OS Root Drive. I happen to talk to a System Administrator in an IT company and he advised that we should never set the page file on the OS drive but on an alternate drive wherever possible. It would be really helpful, if you can guide me here or at least point me to the right resources so that I can read about paging and best practices of paging. Cheers,

  Read the article

• Does reformatting the drive really removes spywares and viruses

  - by user23950

  I've recently read that the data that you deleted in windows using shift+del doesn't actually get deleted it is just made to be overwritable by other data that will soon be stored in your hard drive. And just marked as deleted. And there are some articles like this: http://www.howtogeek.com/howto/15037/use-an-ubuntu-live-cd-to-securely-wipe-your-pcs-hard-drive/ that shows how to completely wipe out the hard drive of all the data. And thus the data can't be recovered even by the most advanced software for recovering deleted data. Now my question is, does spyware, virus or other harmful really are lost forever if you reformat your drive?

  Read the article

• Daisychain external USB drive to WD My Book World Edition (Blue rings)

  - by d03boy

  I recently bought a new My Book Essential 1TB (WDBACW0010HBK-NESN) to daisychain to my older My Book World Edition 500GB (blue rings) with one of the version 01.xx.xx firmwares. At first when I connected the USB drive to the MBWE, it showed up in the System Summary section of the administration page without any issue. I was able to set up a new share on the new drive. The administration website moved very, very slow though. The administration pages became nearly unresponsive during this setup process. Once the share was set up I could access the new share but again, it was very slow, now through Windows Explorer. I looked around the internet and it seems that this is caused by the USB drive being formatted with NTFS. I tried reformatting it (again, as NTFS) just to double check and the same problem occurred. I then tried FAT32 but realized it would only support files of approximately 2GB and that is not acceptable for me. I decided to try a firmware upgrade on the MBWE to version 02.00.19. The firmware upgrade completed successfully but now the MBWE does not display the USB drive in the System Summary like it did with the earlier firmware version. The USB drive works perfectly fine when connected directly to my computer. Is there a way to solve this issue?

  Read the article

• Cannot boot from a hard drive

  - by Martin Melka

  I have a problem booting from a hdd. I used to have it as my main drive before I bought an SSD, so I had been able to boot from it. But for some reason, now, half a year later, I can't get it to work. I completely erased it, deleting data and partitioning (using EASEUS Partition Master), then I installed Kubuntu (without changing anything in the installer), but it simply won't boot up. It always boots the drive with Windows and when I unplug this drive, it only gives me an error "PXE-E61: Media test failure, check cable", I guess it's trying to boot from LAN. I tried installing the system on a freshly deleted drive, without any other drives plugged in the pc, but the problems persist. This is how the drives look now (first one has Windows 7 installed, the second one Kubuntu): I am lost. I mean, after doing a fresh wipe and a clean install without altering anything, it should work. But it doesn't. What can be wrong here? Thanks

  Read the article

• Removing orphaned iTunes songs from hard drive

  - by JubJub

  Some times when I delete songs from iTunes it does not ask me if I also want to delete it from the hard drive. As a result I have a bunch of songs that are taking up space in my hard drive that are not in iTunes. I have over 3000 files, is there an automated way to find files on the hard drive that are NOT in iTunes? I want to delete them so that they are not taking up space.

  Read the article

• How to reassign drive back into MediaShield (nvidia) RAID stripe

  - by scottwed

  So I managed to inadvertently remove the RAID configuration from 1 drive of a 2 drive stripe. I have both drives, unmodified, and undamaged. Specifically for MediaShield RAID, is there any way to reattach the 2nd drive back into the stripe? Current state is the stripe is displayed in Error status, and I have the other drive available, but unassigned. I strongly suspect there is no solution without purging the array completely and redefining the stripe, but I figured it was worth asking before I wipe out the data.

  Read the article

• Installed Paragon HFS+ for Windows 8, now my pc won't recognize the external firewire drive

  - by Steve

  I'm not incredibly knowledgeable about computers and I really need some help. Just got a Seagate external firewire drive this morning. I downloaded the necessary pc driver (Paragon HFS+ for Windows 8) through their website per the instructions that came with the drive. After installation, I restarted and the pc recognized the firewire drive just fine. About three hours into copying files from my pc to the firewire drive, it gave me an error and told me the files couldn't be copied. When I clicked to get out of the message, the computer crashed. After an hour of it trying to repair itself in safe mode, it restored me to an earlier version before the system crashed. Here's my current dilemma: The Paragon HFS+ is still showing up in my programs as installed, but the Device Manager is not recognizing the drive. When I try to uninstall and reinstall Paragon, it interrupts me with a message saying "The setup must update files or services that cannot be updated while the system is running" and basically gives me the finger. I have no idea what to do now, as it won't let me uninstall and reinstall Paragon, and I have no idea why it crashed my computer in the first place. Is there possibly another Mac - PC firewire driver I can try downloading instead? I really don't know what I'm doing and any help would be greatly appreciated.

  Read the article

• Eject a bad disk from optical drive

  - by Chuck

  I have an Alienware computer with one of the optical DVD drives that does not have a manual tray, just a slot to insert the disk. I recently inserted a disk that was apparently bad. It is unreadable does not show up in Windows Explorer. I tried right clicking on the Drive letter and hitting eject, but get an error message that there is no disk in the drive. How do I get the d--ned disk out so I can use the drive?

  Read the article

• How to install Windows 7 on a MacBook with HDDs and no optical drive, without rEFIt

  - by user1238528

  I just removed the SuperDrive on my MacBook Pro and replaced it with an SSD. So now my laptop has a SSD, and a HDD, but no optical drive. I have Lion on the SSD and I want to install Windows 7 on the HDD. Unfortunately, Boot Camp only will install Windows off of the Windows DVD. I have made a bootable Windows 7 thumb drive but my MacBook Pro won’t boot off it. So my question is how can I install Windows on the other HDD? I have thought about maybe using Oracle VirtualBox to install it on that hard drive, but I don’t know if that would allow me to boot directly into Windows. I really don't want to go down the whole virtualization route. I know I could just take out the SSD, put back in the optical drive, run the Windows 7 DVD, take the optical drive back out, put the SSD back in. But that sounds like a nightmare. Also, I really don’t want to use things like rEFIt. Any advice?

  Read the article

• Accessing clearcase view drive from virtual machine is slow

  - by PermanentGuest

  I have a windows XP virtual machine running under a Windows XP host. On the host : On the host clearcase 7.1.1.2 is installed. I have a dynamic view mapped onto some drive. The view has certain VOB/directory structure where my application DLLs from the nightly build and config files are stored. I run my application on the host machine which uses the DLLs and config files from the VOB and everything runs smooth. Now I want to move this set-up to a virtual machine. On the guest : I'm running the guest with a vm-player. I don't want to install clear-case on this as I don't want to expose this machine onto the network. The network setting in the guest is 'host-only'. I have mapped the host's clearcase view drive as a shared folder and I'm able to access this drive from the virtual machine. Also, the application is running. However, the problem is that the access of the clearcase drive from the virtual machine is very slow. I can experience this from the windows explorer. Due to this, the starting of my application takes several seconds in the virtual machine while on the guest it comes up pretty fast. My question is : Is there any way to speed up the performance? I have managed to copy some of the DLLs which don't change frequently to the virtual machine to improve the performance. However, there are still lot of DLLs which have to be taken from the clearcase drive as they change frequently. VMplayer version is : VM Player 3.0.1 build-227600 Both guest and host is : Windows XP service pack 3 Host clearcase is : clearcase 7.1.1.2

  Read the article

• Virtual system drive is split between separate LUNs

  - by Tigran

  My hardware VMWare guy told me that a Win2008R2 server I have has a D drive that is split between two separate LUNs. He could not tell me if that's a good thing or bad just that it's not standard practice for him. Would you please explain the benefits or drawbacks of this setup? Thanks EDIT Some additional info. What happened was I had D drive already allocated. Then I asked for more. They said there's no more space on whatever LUN my D drive is on so the option they gave me was that part of the D drive will be on one LUN and other part will be on another LUN. Hope that helps

  Read the article

• iMac boot from linux partition on external drive

  - by user74757

  I have the following "setup:" iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]] | | | | (USB) | | | | [[MISC STORAGE PARTITION] [MISC STORAGE PARTITION] [EXT2 UBUNTU PARTITION]] I routinely use the firewire drive to boot MAC OS X. However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd). My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)... Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.

  Read the article

• Imac g5 with no OS nor CD drive

  - by sinekonata

  What I want: Ubuntu on a g5 Imac. What I have: An empty PC (Intel g5 17" Imac) with broken CD drive. Its model is A1173. This PC with Ubuntu 12.04 and an old Vista partition. a usb flash drive. Problems: No CD means the only boot Drive I could use is USB. There are no BIOS on Macs so I can't set boot settings or even see if it detects my USB drive. When I start the machine and press ALT the first and only thing I see is an old corrupted winXP partition and not a single option or additional information. So assuming blindly that the Mac hardware/firmware works normally, I don't have any Mac OS to use any of the tools that I found on different tutorials for building a bootable .img drive for macs. I can't find much software on Linux/Windows to substitute to those tools, for example among others converting an .iso file (win/linux) to .img (mac I guess). Which makes me think that the scenario where someone like me has Mac hardware but no Mac OS is extremely rare. So other than finding someone that has a Mac I have no solution. So I ask what would you do? the only thing is it should not involve any money (I know mac soft is rarely free) which also excludes getting any MacOS unless I can use a free macos.img for VM or restore the original Mac for free. Thank you

  Read the article

• Running RAID on an internal storage drive

  - by Johnny W

  I am running Windows 8 on an SSD, and it's all running swimmingly, but I want to put my documents on a "normal" HD running under RAID 1. I have four SATA 3GB/s ports on my motherboard (my Windows 8 SSD drive in on a different 6GB/s controller). All four are used (1 Bluray Optical Drive, 1 Spare HD, and the 2 I wish to turn into a RAID 1 drive. In my BIOS I can only change settings for the entire controller, not just ports. So my question is: If I turn these four ports into a RAID controller, will that negatively affect the non-RAID hardware plugged into it? I.e. Will a HD or Bluray drive be slower/incompatible with being plugged into a non AHCI SATA port? Thanks.

  Read the article

• How to backup mirror copies of C: drive?

  - by metal gear solid

  I've installed everything on my C: Drive . Whatever i need Windows 7, updated drivers and utilities and software etc i need. I now i want to take a backup mirror of everything in a DVD or i can keep backup in another USB HDD. so in case if i face any windows or hard-drive failure in future then i can restore everything as it is as all are today. I don't want to reinstall everything again Windows, Drivers all utilities and all needed soft-wares. My C: Drive's total capacity is 108 GB but data on c: drive is only 12 GB. What Should i do ? What is the best solution for me? I need free solution.

  Read the article

• Empty DVD Drive indicates it has music in it (CDFS)

  - by Amado Colberg

  I have a Windows 7, 64 bit computer with a Blu-ray DVD drive. When I first start the computer, the DVD drive indicates it has music in it, but it is empty. If I put a CD in it, it will not Autoplay. But, if I open the drive and close it again, it will Autoplay and will no longer act as if it has a music CD in it. I've checked the drive with Plextor Utilities and it says it is working OK. I would appreciate any help with this.

  Read the article

• How can one implement RAID1 with a Dell Latitude laptop containing one normal hard drive, and one hard drive in an external bay?

  - by user12583188

  OS: Win7 professional Laptop: latitude e6420 The answer to this question should address how to deploy RAID1 software wise on a dell latitude e6420. I have two Hitachi Z5K500 320GB drives (new). There is one hard drive (320GB capacity) in the system now, which contains the current installation that I would prefer to keep. The drive currently inside the laptop will be replaced with one of the Hitachi drives, and the other Hitachi drive will be fitted into the laptop by way of a Dell hard drive "caddy" enclosure, which inserts into the media bay of the laptop (you remove the cd-rom bay, insert hd-bay).

  Read the article

• Can't copy files from network drive

  - by user630320

  I have weird problem with copying files. When I copy file from network drive into C drive nothing happens but when I copy file from network drive to desktop I can copy the file. Also if I copy files from desktop into C it works fine. I have full local admin permission on this PC and the network drive. I have try these things Created new profile Run Windows Update Run checkdisk I'm using Windows XP 32bit pro Update: Network path: \\server1\shared\folder PC: C:\ (this doesn't work) C:\Documents and settings\Userid\Desktop (This works fine)

  Read the article

• Restore wubi install after changing master drive

  - by Johnny

  Recently I got a 160G drive to install other Unix distributions and learn to use them for the sake of my current job. However I've got only 2 drive connectors free (on the primary channel). Therefore I've decided to remove an 80G hard drive which has the MBR and the main Windows bootloader. My problem in particular is that I've got another 250G drive which has a Wubi installation of Ubuntu 10.04 (Lucid Lynx), which I want to preserve on the bootloader that's going to be running for all the other OSes (potentially Grub). How would I do that? Since Wubi is actually sort of windows reliant, as far as I've learned so far.

  Read the article

• Unable to mount iso as dvd drive in VMware Fusion 6

  - by John O

  I have a newer iMac without an optical drive and some DVDs that I needed to run software off of. This software will have you juggle discs to read data off of them, and the data can't simply be copied to the machine's drive. I used a windows machine to make ISOs of these DVDs. And the first disc, the installer, it will mount in VMware and let you install the software. It then asks for the other discs, and these won't mount as ISOs. If I mount them as drive images, they'll show up on the iMac's and I have access to all the files. But if I try to mount them as the dvd drive through Fusion, nothing happens. For that matter, I'm unable to attempt it a second time, as Fusion believes that the there is already an iso mounted as the dvd, while nothing has happened as far as the guest OS is concerned. drutil eject will allow me to eject the ghost/non-existent dvd, at which point I can make a second (equally futile) attempt. Does anyone have an explanation for this behavior? How can the ISO be valid enough to mount as a drive image, but not valid enough for Fusion to mount it as if it were a dvd?

  Read the article

• Mirroring a drive in Debian

  - by James Willson

  I have a drive with data on it. I dont want to use RAID, instead I want to do hourly backups to a second drive. I basically want to mirror the data drive and resync every hour. It is inefficient to re-move the data each time so really I only want to move across what changes. I.e if I add a new file to the data drive only that file will be moved across. What tools are there for doing this on the command line? I used to use luckybackup on Ubuntu but now im on commandline debian.

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >