Search Results

Search found 3691 results on 148 pages for 'perfect forwarding'.

Page 116/148 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• Performing an upgrade from TFS 2008 to TFS 2010

  - by Enrique Lima

  I recently had to go through the process of migrating a TFS 2008 SP1 to a TFS 2010 environment. I will go into the details of the tasks that I went through, but first I want to explain why I define it as a migration and not an upgrade. When this environment was setup, based on support and limitations for TFS 2008, we used a 32 bit platform for the TFS Application Tier and Build Servers.  The Data Tier, since we were installing SP1 for TFS 2008, was done as a 64 bit installation.  We knew at that point that TFS 2010 was in the picture so that served as further motivation to make that a 64bit install of SQL Server.  The SQL Server at that point was a single instance (Default) installation too.  We had a pretty good strategy in place for backups of the databases supporting the environment (and this made the migration so much smoother), so we were pretty familiar with the databases and the purpose they serve. I am sure many of you that have gone through a TFS 2008 installation have encountered challenges and trials.  And likely even more so if you, like me, needed to configure your deployment for SSL.  So, frankly I was a little concerned about the process of migrating.  They say practice makes perfect, and this environment I worked on is in some way my brain child, so I was not ready nor willing for this to be a failure or something that would impact my client’s work. Prior to going through the migration process, we did the install of the environment.  The Data Tier was the same, with a new Named instance in place to host the 2010 install.  The Application Tier was in place too, and we did the DefaultCollection configuration to test and validate all components were in place as they should. Anyway, on to the tasks for the migration (thanks to Martin Hinselwood for his very thorough documentation): Close access to TFS 2008, you want to make sure all code is checked in and ready to go.  We stated a difference of 8 hours between code lock and the start of migration to give time for any unexpected delay.  How do we close access?  Stop IIS. Backup your databases.  Which ones? TfsActivityLogging TfsBuild TfsIntegration TfsVersionControl TfsWorkItemTracking TfsWorkItemTrackingAttachments Restore the databases to the new Named Instance (make sure you keep the same names) Now comes the fun part! The actual import/migration of the databases.  A couple of things happen here. The TfsIntegration database will be scanned, the other databases will be checked to validate they exist.  Those databases will go through a process of data being extracted and transferred to the TfsVersionControl database to then be renamed to Tfs_<Collection>. You will be using a tool called tfsconfig and the option import. This tool is located in the TFS 2010 installation path (C:\Program Files\Microsoft Team Foundation Server 2010\Tools),  the command to use is as follows:    tfsconfig import /sqlinstance:<instance> /collectionName:<name> /confirmed Where <instance> is going to be the SQL Server instance where you restored the databases to.  <name> is the name you will give the collection. And to explain /confirmed, well this means you have done a backup of the databases, why?  well remember you are going to merge the databases you restored when you execute the tfsconfig import command. The process will go through about 200 tasks, once it completes go to Team Foundation Server Administration Console and validate your imported databases and contents. We’ll keep this manageable, so the next post is about how to complete that implementation with the SSL configuration.

  Read the article

• Serial plans: Threshold / Parallel_degree_limit = 1

  - by jean-pierre.dijcks

  As a very short follow up on the previous post. So here is some more on getting a serial plan and why that happens Another reason - compared to the auto DOP is not on as we looked at in the earlier post - and often more prevalent to get a serial plan is if the plan simply does not take long enough to consider a parallel path. The resulting plan and note looks like this (note that this is a serial plan!): explain plan for select count(1) from sales; SELECT PLAN_TABLE_OUTPUT FROM TABLE(DBMS_XPLAN.DISPLAY()); PLAN_TABLE_OUTPUT -------------------------------------------------------------------------------- Plan hash value: 672559287 -------------------------------------------------------------------------------------- | Id  | Operation            | Name  | Rows  | Cost (%CPU)| Time     | Pstart| Pstop | -------------------------------------------------------------------------------------- PLAN_TABLE_OUTPUT -------------------------------------------------------------------------------- |   0 | SELECT STATEMENT     |       |     1 |     5   (0)| 00:00:01 |       |     | |   1 |  SORT AGGREGATE      |       |     1 |            |          |       |     | |   2 |   PARTITION RANGE ALL|       |   960 |     5   (0)| 00:00:01 |     1 |  16 | |   3 |    TABLE ACCESS FULL | SALES |   960 |     5   (0)| 00:00:01 |     1 |  16 | Note -----    - automatic DOP: Computed Degree of Parallelism is 1 because of parallel threshold 14 rows selected. The parallel threshold is referring to parallel_min_time_threshold and since I did not change the default (10s) the plan is not being considered for a parallel degree computation and is therefore staying with the serial execution. Now we go into the land of crazy: Assume I do want this DOP=1 to happen, I could set the parameter in the init.ora, but to highlight it in this case I changed it on the session: alter session set parallel_degree_limit = 1; The result I get is: ERROR: ORA-02097: parameter cannot be modified because specified value is invalid ORA-00096: invalid value 1 for parameter parallel_degree_limit, must be from among CPU IO AUTO INTEGER>=2 Which of course makes perfect sense...

  Read the article

• Interview with Ronald Bradford about MySQL Connect

  - by Keith Larson

  Ronald Bradford,  an Oracle ACE Director has been busy working with  database consulting, book writing (EffectiveMySQL) while traveling and speaking around the world in support of MySQL. I was able to take some of his time to get an interview on this thoughts about theMySQL Connect conference. Keith Larson: What where your thoughts when you heard that Oracle was going to provide the community the MySQL Conference ?Ronald Bradford: Oracle has already been providing various different local community events including OTN Tech Days and  MySQL community days. These are great for local regions both in the US and abroad.  In previous years there has been an increase of content at Oracle Open World, however that benefits the Oracle community far more then the MySQL community.  It is good to see that Oracle is realizing the benefit in providing a large scale dedicated event for the MySQL community that includes speakers from the MySQL development teams, invested companies in the ecosystem and other community evangelists.I fully expect a successful event and look forward to hopefully seeing MySQL Connect at the upcoming Brazil and Japan OOW conferences and perhaps an event on the East Coast.Keith Larson: Since you are part of the content committee, what did you think of the submissions that were received during call for papers?Ronald Bradford: There was a large number of quality submissions to the number of available presentation sessions. As with the previous years as a committee member for the annual MySQL conference, there is always a large variety of common cornerstone MySQL features as well as new products and upcoming companies sharing their MySQL experiences. All of the usual major players in the ecosystem will in presenting at MySQL Connect including Facebook, Twitter, Yahoo, Continuent, Percona, Tokutek, Sphinx and Amazon to name a few.  This is ensuring the event will have a large number of quality speakers and a difficult time in choosing what to attend. Keith Larson: What sessions do you look forwarding to attending? Ronald Bradford: As with most quality conferences you can only be in one place at one time, so with multiple tracks per session it is always difficult to decide. The continued work and success with MySQL Cluster, and with a number of sessions I am sure will be popular. The features that interest me the most are around the optimizer, where there are several sessions on new features, and on the importance of backups. There are three presentations in this area to choose from.Keith Larson: Are you going to cover any of the content in your books at your MySQL Connect sessions?Ronald Bradford: I will be giving two presentations at MySQL Connect. The first will include the techniques available for creating better indexes where I will be touching on some aspects of the first Effective MySQL book on Optimizing SQL Statements.  In my second presentation from experiences of managing 500+ AWS MySQL instances, I will be touching on areas including SQL tuning, backup and recovery and scale out with replication.   These are the key topics of the initial books in the Effective MySQL series that focus on performance, scalability and business continuity.  The books however cover a far greater amount of detail then can be presented in a 1 hour session. Keith Larson: What features of MySQL 5.6 do you look forward to the most ?Ronald Bradford: I am very impressed with the optimizer trace feature. The ability to see exposed information is invaluable not just for MySQL 5.6, but to also apply information discerned for optimizing SQL statements in earlier versions of MySQL.  Not everybody understands that it is easy to deploy a MySQL 5.6 slave into an existing topology running an older version if MySQL for evaluation of many new features.  You can use the new mysqlbinlog streaming feature for duplicating master binary logs on an older version with a MySQL 5.6 slave.  The improvements in instrumentation in the Performance Schema are exciting.   However, as with my upcoming Replication Techniques in Depth title, that will be available for sale at MySQL Connect, there are numerous replication features, some long overdue with provide significant management benefits. Crash Save Slaves, Global transaction Identifiers (GTID)  and checksums just to mention a few.Keith Larson: You have been to numerous conferences, what would you recommend for people at the conference? Ronald Bradford: Make the time to meet and introduce yourself to the speakers that cover the topics that most interest you. The MySQL ecosystem has a very strong community.  The relationships you build with presenters, developers and architects in MySQL can be invaluable, however they are created over time. Get to know these people, interact with them over time.  This is the opportunity to learn more then just the content from a 1 hour session. Keith Larson: Any additional tips to handling the long hours ? Ronald Bradford: Conferences can be hard, especially with all the post event drinking.  This is a two day event and I am sure will include additional events on Friday and Saturday night so come well prepared, and leave work behind. Take the time to learn something new.   You can always catchup on sleep later. Keith Larson: Thank you so much for taking some time to do this I look forward to seeing you at the MySQL Connect conference.  Please stay tuned here for more updates on MySQL. 

  Read the article

• A little primer on using TFS with a small team

  - by johndoucette

  The scenario; A small team of 3 developers mostly in maintenance mode with traditional ASP.net, classic ASP, .Net integration services and utilities with the company’s third party packages, and a bunch of java-based Coldfusion web applications all under Visual Source Safe (VSS). They are about to embark on a huge SharePoint 2010 new construction project and wanted to use subversion instead VSS. TFS was a foreign word and smelled of “high cost” and of an “over complicated process”. Since they had no preconditions about the old TFS versions (‘05 & ‘08), it was fun explaining how simple it was to install a TFS server and get the ball rolling, with or without all the heavy stuff one sometimes associates with such a huge and powerful application management lifecycle product. So, how does a small team begin using TFS? 1. Start by using source control and migrate current VSS source trees into TFS. You can take the latest version or migrate the entire version history. It’s up to you on whether you want a clean start or need quick access to all the version notes and history of the bits. 2. Since most shops are mainly in maintenance mode with existing applications, begin using bug workitems for everything. When you receive an issue/bug from your current tracking system, manually enter the workitem in TFS right through Visual Studio. You can automate the integration to the current tracking system later or replace it entirely. Believe me, this thing is powerful and can handle even the largest of help desks. 3. With new construction, begin work with requirements and task workitems and follow the traditional sprint-based development lifecycle. Obviously, some minor training will be needed, but don’t fear, this is very intuitive and MSDN has a ton of lesson based labs and videos. 4. For the java developers, use the new Team Explorer Everywhere 2010 plugin (recently known as Teamprise). There is a seamless interface in Eclipse, but also a good command-line utility for other environments such as Dreamweaver. 5. Wait to fully integrate the whole workitem/project management/testing process until your team is familiar with the integrated workitems for bugs and code. After a while, you will see the team wanting more transparency into the work they are all doing and naturally, everyone will want workitems to help them organize the chaos! 6. Management will be limited in the value of the reports until you have a fully blown implementation of project planning, construction, build, deployment and testing. However, there are some basic “bug rate” reports and current backlog listings that can provide good information. Some notable explanations of TFS; Work Item Tracking and Project Management - A workitem represents the unit of work within the system which enables tracking of all activities produced by a user, whether it is a developer, business user, project manager or tester. The properties of a workitem such as linked changesets (checked-in code), who updated the data and when, the states and reasons for change, are all transitioned to a data warehouse within TFS for reporting purposes. A workitem can be defines as a "bug", "requirement", test case", or a "change request". They drive the work effort by the individual assigned to it and also provide a key role in defining what needs to be done. Workitems are the things the team needs to do to accomplish a goal. Test Case Management - Starting with a workitem known as a "test case", a tester (or developer) can now author and manage test cases within a formal test plan subsystem. Although TFS supports the test case workitem type, there is a new product known as the VS Test Professional 2010 which allows a tester to facilitate manual tests including fast forwarding steps in the process to arrive at the assertion point quickly. This repeatable process provides quick regression tests and can be conducted by the business user to ensure completeness during UAT. In addition, developers no longer can provide a response to a bug with the line "cannot reproduce". With every test run, attachments including the recorded session, captured environment configurations and settings, screen shots, intellitrace (debugging history), and in some cases if the lab manager is being used, a snapshot of the tested environment is available. Version Control - A modern system allowing shared check-in/check-out, excellent merge conflict resolution, Shelvesets (personal check-ins), branching/merging visualization, public workspaces, gated check-ins, security hierarchy capabilities, and changeset/workitem tracking. Knowing what was done with the code by any developer has become much easier to picture and resolve issues. Team Build - Automate the compilation process whether you need it to be whenever a developer checks-in code, periodically such as nightly builds for testers in the morning, or manual builds to be deployed into production. Each build can run through pre-determined tests, perform code analysis to see if the developer conforms to the team standards, and reject the build if either fails. Project Portal & Reporting - Provide management with a dashboard with insight into the project(s). "Where are we" in each step of the way including past iterations and the current burndown rate. Enabling this feature is easy as it seamlessly interfaces with existing SharePoint implementations.

  Read the article

• SQL SERVER – How to Roll Back SQL Server Database Changes

  - by Pinal Dave

  In a perfect scenario, no unexpected and unplanned changes occur. There are no unpleasant surprises, no inadvertent changes. However, even with all precautions and testing, there is sometimes a need to revert a structure or data change. One of the methods that can be used in this situation is to use an older database backup that has the records or database object structure you want to revert to. For this method, you have to have the adequate full database backup and a tool that will help you with comparison and synchronization is preferred. In this article, we will focus on another method: rolling back the changes. This can be done by using: An option in SQL Server Management Studio T-SQL, or ApexSQL Log The first two solutions have been described in this article The disadvantages of these methods are that you have to know when exactly the change you want to revert happened and that all transactions on the database executed in a specific time range are rolled back – the ones you want to undo and the ones you don’t. How to easily roll back SQL Server database changes using ApexSQL Log? The biggest challenge is to roll back just specific changes, not all changes that happened in a specific time range. While SQL Server Management Studio option and T-SQL read and roll forward all transactions in the transaction log files, I will show you a solution that finds and scripts only the specific changes that match your criteria. Therefore, you don’t need to worry about all other database changes that you don’t want to roll back. ApexSQL Log is a SQL Server disaster recovery tool that reads transaction logs and provides a wide range of filters that enable you to easily rollback only specific data changes. First, connect to the online database where you want to roll back the changes. Once you select the database, ApexSQL Log will show its recovery model. Note that changes can be rolled back even for a database in the Simple recovery model, when no database and transaction log backups are available. However, ApexSQL Log achieves best results when the database is in the Full recovery model and you have a chain of subsequent transaction log backups, back to the moment when the change occurred. In this example, we will use only the online transaction log. In the next step, use filters to read only the transactions that happened in a specific time range. To remove noise, it’s recommended to use as many filters as possible. Besides filtering by the time of the transaction, ApexSQL Log can filter by the operation type: Table name: As well as transaction state (committed, aborted, running, and unknown), name of the user who committed the change, specific field values, server process IDs, and transaction description. You can select only the tables affected by the changes you want to roll back. However, if you’re not certain which tables were affected, you can leave them all selected and once the results are shown in the main grid, analyze them to find the ones you to roll back. When you set the filters, you can select how to present the results. ApexSQL Log can automatically create undo or redo scripts, export the transactions into an XML, HTML, CSV, SQL, or SQL Bulk file, and create a batch file that you can use for unattended transaction log reading. In this example, I will open the results in the grid, as I want to analyze them before rolling back the transactions. The results contain information about the transaction, as well as who and when made it. For UPDATEs, ApexSQL Log shows both old and new values, so you can easily see what has happened. To create an UNDO script that rolls back the changes, select the transactions you want to roll back and click Create undo script in the menu. For the DELETE statement selected in the screenshot above, the undo script is: INSERT INTO [Sales].[PersonCreditCard] ([BusinessEntityID], [CreditCardID], [ModifiedDate]) VALUES (297, 8010, '20050901 00:00:00.000') When it comes to rolling back database changes, ApexSQL Log has a big advantage, as it rolls back only specific transactions, while leaving all other transactions that occurred at the same time range intact. That makes ApexSQL Log a good solution for rolling back inadvertent data and schema changes on your SQL Server databases. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: ApexSQL

  Read the article

• My Experience at Oracle !!! By Ayush Gupta

  - by Nadiya

  Normal 0 false false false EN-US X-NONE X-NONE Hi! My name is Ayush, a Gratuate from BITS Pilani and now working and living in Bangalore. I joined Oracle in August 2013 as a Senior Consultant (SC) and would like to share my experiences over the first couple of months with you.It has been a wonderful journey so far. The last two months have been very exciting for me. First of all I would like to mention that the training program at Oracle that we went through really prepared us well. It matured us and allowed us to go from developing small applications in college to big enterprise products. Two months of initial training has had a lasting impact for me. I am also really enjoying the knowledge I have gained so far and also learning new things in the form of product training. It's really fun to work here. We are treated like adults and we are responsible for our own workloads.With that I can't keep from mentioning the fun times we as a team have in the form of Young Leadership programme in Hotel Fortune Trinity which included Luxurious buffet lunch too. Wishing it could happen more frequently.  Oracle provides one of the best opportunities to learn various technologies across different platforms. What I like best about working at Oracle is the work life balance. With the option of flexible timings, one can easily enjoy planned evenings with friends or maybe working out at the fitness centre in your building. Be it the birthday celebrations at office or the day long team outing at a resort, It’s all together a different experience. Overall, you get to take full ownership of your project and they give you a free leash on how you design your enhancements/changes.As one of the largest international companies, Oracle is obviously an expert on exploring the potential and possibility of inexperienced new hires. We were taught how to make an outstanding team work in a group training session at the first few weeks. From this experience I realized that perfect cooperation is not about where you come from or what your study background is, everyone can find his or her own role to support the team. Even though I am not that skilled in technology, my background has significantly helped me in learning new technologies in Oracle.My idea and suggestion is: for new joiners, the will to learn is be more important than what you have learnt before. Colleagues here at Oracle are professionals in their field, always friendly and glad to help. So don’t worry, all you need to do is just be confident, and have a nice attitude, Oracle will let you fully display your talent. Come and join us, here you can always find a tailor made role for you! /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• First-Time GLSL Shadow Mapping Problems

  - by Locke

  I'm working on building out a 2.5D engine and having massive problems getting my shadows working. I'm at a point where I'm VERY close. So, let's see a picture to see what I have: As you can see above, the image has lighting -- but the shadow map is displaying incorrectly. The shadow map is shown in the bottom left hand side of the screen as a normal 2D texture, so we can see what it looks like at any given time. If you notice, it appears that the shadows are generating backwards in the wrong direction -- I think. But the problem is a little more deep -- I'm just plotting the shadow onto the screen, which I know is wrong -- I'm ignoring the actual test to see if we NEED to show a shadow. The incoming parameters all appear to be correct -- so there has to be something wrong with my shader code somewhere. Here's what my code looks like: VERTEX: uniform mat4 LightModelViewProjectionMatrix; varying vec3 Normal; // The eye-space normal of the current vertex. varying vec4 LightCoordinate; // The texture coordinate of the light of the current vertex. varying vec3 LightDirection; // The eye-space direction of the light. void main() { Normal = normalize(gl_NormalMatrix * gl_Normal); LightDirection = normalize(gl_NormalMatrix * gl_LightSource[0].position.xyz); LightCoordinate = LightModelViewProjectionMatrix * gl_Vertex; LightCoordinate.xy = ( LightCoordinate.xy * 0.5 ) + 0.5; gl_Position = ftransform(); gl_TexCoord[0] = gl_MultiTexCoord0; } FRAGMENT: uniform sampler2D DiffuseMap; uniform sampler2D ShadowMap; varying vec3 Normal; // The eye-space normal of the current vertex. varying vec4 LightCoordinate; // The texture coordinate of the light of the current vertex. varying vec3 LightDirection; // The eye-space direction of the light. void main() { vec4 Texel = texture2D(DiffuseMap, vec2(gl_TexCoord[0])); // Directional lighting //Build ambient lighting vec4 AmbientElement = gl_LightSource[0].ambient; //Build diffuse lighting float Lambert = max(dot(Normal, LightDirection), 0.0); //max(abs(dot(Normal, LightDirection)), 0.0); vec4 DiffuseElement = ( gl_LightSource[0].diffuse * Lambert ); vec4 LightingColor = ( DiffuseElement + AmbientElement ); LightingColor.r = min(LightingColor.r, 1.0); LightingColor.g = min(LightingColor.g, 1.0); LightingColor.b = min(LightingColor.b, 1.0); LightingColor.a = min(LightingColor.a, 1.0); LightingColor *= Texel; //Everything up to this point is PERFECT // Shadow mapping // ------------------------------ vec4 ShadowCoordinate = LightCoordinate / LightCoordinate.w; float DistanceFromLight = texture2D( ShadowMap, ShadowCoordinate.st ).z; float DepthBias = 0.001; float ShadowFactor = 1.0; if( LightCoordinate.w > 0.0 ) { ShadowFactor = DistanceFromLight < ( ShadowCoordinate.z + DepthBias ) ? 0.5 : 1.0; } LightingColor.rgb *= ShadowFactor; //gl_FragColor = LightingColor; //Yes, I know this is wrong, but the line above (gl_FragColor = LightingColor;) produces the wrong effect gl_FragColor = LightingColor * texture2D( ShadowMap, ShadowCoordinate.st ); } I wanted to make sure the coordinates were correct for the shadow map -- so that's why you see it applied to the image as it is below. But the depth for each point seems to be wrong -- the shadows SHOULD be opposite (look at how the image is -- the shaded areas from normal lighting are facing the opposite direction of the shadows). Maybe my matrices are bad or something going in? They're isolated and appear to be correct -- nothing else is going in unusual. When I view from the light's view and get the MVP matrices for it, they're correct. EDIT: Added an image so you can see what happens when I do the correct command at the end of the GLSL: That's the image when the last line is just glFragColor = LightingColor; Maybe someone has some idea of what I screwed up?

  Read the article

• C# 5 Async, Part 2: Asynchrony Today

  - by Reed

  The .NET Framework has always supported asynchronous operations.  However, different mechanisms for supporting exist throughout the framework.  While there are at least three separate asynchronous patterns used through the framework, only the latest is directly usable with the new Visual Studio Async CTP.  Before delving into details on the new features, I will talk about existing asynchronous code, and demonstrate how to adapt it for use with the new pattern. The first asynchronous pattern used in the .NET framework was the Asynchronous Programming Model (APM).  This pattern was based around callbacks.  A method is used to start the operation.  It typically is named as BeginSomeOperation.  This method is passed a callback defined as an AsyncCallback, and returns an object that implements IAsyncResult.  Later, the IAsyncResult is used in a call to a method named EndSomeOperation, which blocks until completion and returns the value normally directly returned from the synchronous version of the operation.  Often, the EndSomeOperation call would be called from the callback function passed, which allows you to write code that never blocks. While this pattern works perfectly to prevent blocking, it can make quite confusing code, and be difficult to implement.  For example, the sample code provided for FileStream’s BeginRead/EndRead methods is not simple to understand.  In addition, implementing your own asynchronous methods requires creating an entire class just to implement the IAsyncResult. Given the complexity of the APM, other options have been introduced in later versions of the framework.  The next major pattern introduced was the Event-based Asynchronous Pattern (EAP).  This provides a simpler pattern for asynchronous operations.  It works by providing a method typically named SomeOperationAsync, which signals its completion via an event typically named SomeOperationCompleted. The EAP provides a simpler model for asynchronous programming.  It is much easier to understand and use, and far simpler to implement.  Instead of requiring a custom class and callbacks, the standard event mechanism in C# is used directly.  For example, the WebClient class uses this extensively.  A method is used, such as DownloadDataAsync, and the results are returned via the DownloadDataCompleted event. While the EAP is far simpler to understand and use than the APM, it is still not ideal.  By separating your code into method calls and event handlers, the logic of your program gets more complex.  It also typically loses the ability to block until the result is received, which is often useful.  Blocking often requires writing the code to block by hand, which is error prone and adds complexity. As a result, .NET 4 introduced a third major pattern for asynchronous programming.  The Task<T> class introduced a new, simpler concept for asynchrony.  Task and Task<T> effectively represent an operation that will complete at some point in the future.  This is a perfect model for thinking about asynchronous code, and is the preferred model for all new code going forward.  Task and Task<T> provide all of the advantages of both the APM and the EAP models – you have the ability to block on results (via Task.Wait() or Task<T>.Result), and you can stay completely asynchronous via the use of Task Continuations.  In addition, the Task class provides a new model for task composition and error and cancelation handling.  This is a far superior option to the previous asynchronous patterns. The Visual Studio Async CTP extends the Task based asynchronous model, allowing it to be used in a much simpler manner.  However, it requires the use of Task and Task<T> for all operations.

  Read the article

• Windows Azure Recipe: Social Web / Big Media

  - by Clint Edmonson

  With the rise of social media there’s been an explosion of special interest media web sites on the web. From athletics to board games to funny animal behaviors, you can bet there’s a group of people somewhere on the web talking about it. Social media sites allow us to interact, share experiences, and bond with like minded enthusiasts around the globe. And through the power of software, we can follow trends in these unique domains in real time. Drivers Reach Scalability Media hosting Global distribution Solution Here’s a sketch of how a social media application might be built out on Windows Azure: Ingredients Traffic Manager (optional) – can be used to provide hosting and load balancing across different instances and/or data centers. Perfect if the solution needs to be delivered to different cultures or regions around the world. Access Control – this service is essential to managing user identity. It’s backed by a full blown implementation of Active Directory and allows the definition and management of users, groups, and roles. A pre-built ASP.NET membership provider is included in the training kit to leverage this capability but it’s also flexible enough to be combined with external Identity providers including Windows LiveID, Google, Yahoo!, and Facebook. The provider model has extensibility points to hook into other identity providers as well. Web Role – hosts the core of the web application and presents a central social hub users. Database – used to store core operational, functional, and workflow data for the solution’s web services. Caching (optional) – as a web site traffic grows caching can be leveraged to keep frequently used read-only, user specific, and application resource data in a high-speed distributed in-memory for faster response times and ultimately higher scalability without spinning up more web and worker roles. It includes a token based security model that works alongside the Access Control service. Tables (optional) – for semi-structured data streams that don’t need relational integrity such as conversations, comments, or activity streams, tables provide a faster and more flexible way to store this kind of historical data. Blobs (optional) – users may be creating or uploading large volumes of heterogeneous data such as documents or rich media. Blob storage provides a scalable, resilient way to store terabytes of user data. The storage facilities can also integrate with the Access Control service to ensure users’ data is delivered securely. Content Delivery Network (CDN) (optional) – for sites that service users around the globe, the CDN is an extension to blob storage that, when enabled, will automatically cache frequently accessed blobs and static site content at edge data centers around the world. The data can be delivered statically or streamed in the case of rich media content. Training These links point to online Windows Azure training labs and resources where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

• Abstraction, Politics, and Software Architecture

  Abstraction can be defined as a general concept and/or idea that lack any concrete details. Throughout history this type of thinking has led to an array of new ideas and innovations as well as increased confusion and conspiracy. If one was to look back at our history they will see that abstraction has been used in various forms throughout our past. When I was growing up I do not know how many times I heard politicians say “Leave no child left behind” or “No child left behind” as a major part of their campaign rhetoric in regards to a stance on education. As you can see their slogan is a perfect example of abstraction because it only offers a very general concept about improving our education system but they do not mention how they would like to do it. If they did then they would be adding concrete details to their abstraction thus turning it in to an actual working plan as to how we as a society can help children succeed in school and in life, but then they would not be using abstraction. By now I sure you are thinking what does abstraction have to do with software architecture. You are valid in thinking this way, but abstraction is a wonderful tool used in information technology especially in the world of software architecture. Abstraction is one method of extracting the concepts of an idea so that it can be understood and discussed by others of varying technical abilities and backgrounds. One ways in which I tend to extract my architectural design thoughts is through the use of basic diagrams to convey an idea for a system or a new feature for an existing application. This allows me to generically model an architectural design through the use of views and Unified Markup Language (UML). UML is a standard method for creating a 4+1 Architectural View Models. The 4+1 Architectural View Model consists of 4 views typically created with UML as well as a general description of the concept that is being expressed by a model. The 4+1 Architectural View Model: Logical View: Models a system’s end-user functionality. Development View: Models a system as a collection of components and connectors to illustrate how it is intended to be developed.  Process View: Models the interaction between system components and connectors as to indicate the activities of a system. Physical View: Models the placement of the collection of components and connectors of a system within a physical environment. Recently I had to use the concept of abstraction to express an idea for implementing a new security framework on an existing website. My concept would add session based management in order to properly secure and allow page access based on valid user credentials and last user activity.  I created a basic Process View by using UML diagrams to communicate the basic process flow of my changes in the application so that all of the projects stakeholders would be able to understand my idea. Additionally I created a Logical View on a whiteboard while conveying the process workflow with a few stakeholders to show how end-user will be affected by the new framework and gaining additional input about the design. After my Logical and Process Views were accepted I then started on creating a more detailed Development View in order to map how the system will be built based on the concept of components and connections based on the previously defined interactions. I really did not need to create a Physical view for this idea because we were updating an existing system that was already deployed based on an existing Physical View. What do you think about the use of abstraction in the development of software architecture? Please let me know.

  Read the article

• Move a sphere along the swipe?

  - by gameOne

  I am trying to get a sphere curl based on the swipe. I know this has been asked many times, but still it's yearning to be answered. I have managed to add force on the direction of the swipe and it works near perfect. I also have all the swipe positions stored in a list. Now I would like to know how can the curl be achieved. I believe the the curve in the swipe can be calculated by the Vector dot product If theta is 0, then there is no need to add the swipe. If it is not, then add the curl. Maybe this condition is redundant if I managed to find how to curl the sphere along the swipe position The code that adds the force to sphere based on the swipe direction is as below: using UnityEngine; using System.Collections; using System.Collections.Generic; public class SwipeControl : MonoBehaviour { //First establish some variables private Vector3 fp; //First finger position private Vector3 lp; //Last finger position private Vector3 ip; //some intermediate finger position private float dragDistance; //Distance needed for a swipe to register public float power; private Vector3 footballPos; private bool canShoot = true; private float factor = 40f; private List<Vector3> touchPositions = new List<Vector3>(); void Start(){ dragDistance = Screen.height*20/100; Physics.gravity = new Vector3(0, -20, 0); footballPos = transform.position; } // Update is called once per frame void Update() { //Examine the touch inputs foreach (Touch touch in Input.touches) { /*if (touch.phase == TouchPhase.Began) { fp = touch.position; lp = touch.position; }*/ if (touch.phase == TouchPhase.Moved) { touchPositions.Add(touch.position); } if (touch.phase == TouchPhase.Ended) { fp = touchPositions[0]; lp = touchPositions[touchPositions.Count-1]; ip = touchPositions[touchPositions.Count/2]; //First check if it's actually a drag if (Mathf.Abs(lp.x - fp.x) > dragDistance || Mathf.Abs(lp.y - fp.y) > dragDistance) { //It's a drag //Now check what direction the drag was //First check which axis if (Mathf.Abs(lp.x - fp.x) > Mathf.Abs(lp.y - fp.y)) { //If the horizontal movement is greater than the vertical movement... if ((lp.x>fp.x) && canShoot) //If the movement was to the right) { //Right move float x = (lp.x - fp.x) / Screen.height * factor; rigidbody.AddForce((new Vector3(x,10,16))*power); Debug.Log("right "+(lp.x-fp.x));//MOVE RIGHT CODE HERE canShoot = false; //rigidbody.AddForce((new Vector3((lp.x-fp.x)/30,10,16))*power); StartCoroutine(ReturnBall()); } else { //Left move float x = (lp.x - fp.x) / Screen.height * factor; rigidbody.AddForce((new Vector3(x,10,16))*power); Debug.Log("left "+(lp.x-fp.x));//MOVE LEFT CODE HERE canShoot = false; //rigidbody.AddForce(new Vector3((lp.x-fp.x)/30,10,16)*power); StartCoroutine(ReturnBall()); } } else { //the vertical movement is greater than the horizontal movement if (lp.y>fp.y) //If the movement was up { //Up move float y = (lp.y-fp.y)/Screen.height*factor; float x = (lp.x - fp.x) / Screen.height * factor; rigidbody.AddForce((new Vector3(x,y,16))*power); Debug.Log("up "+(lp.x-fp.x));//MOVE UP CODE HERE canShoot = false; //rigidbody.AddForce(new Vector3((lp.x-fp.x)/30,10,16)*power); StartCoroutine(ReturnBall()); } else { //Down move Debug.Log("down "+lp+" "+fp);//MOVE DOWN CODE HERE } } } else { //It's a tap Debug.Log("none");//TAP CODE HERE } } } } IEnumerator ReturnBall() { yield return new WaitForSeconds(5.0f); rigidbody.velocity = Vector3.zero; rigidbody.angularVelocity = Vector3.zero; transform.position = footballPos; canShoot =true; isKicked = false; } }

  Read the article

• DataContractSerializer: type is not serializable because it is not public?

  - by Michael B. McLaughlin

  I recently ran into an odd and annoying error when working with the DataContractSerializer class for a WP7 project. I thought I’d share it to save others who might encounter it the same annoyance I had. So I had an instance of  ObservableCollection<T> that I was trying to serialize (with T being a class I wrote for the project) and whenever it would hit the code to save it, it would give me: The data contract type 'ProjectName.MyMagicItemsClass' is not serializable because it is not public. Making the type public will fix this error. Alternatively, you can make it internal, and use the InternalsVisibleToAttribute attribute on your assembly in order to enable serialization of internal members - see documentation for more details. Be aware that doing so has certain security implications. This, of course, was malarkey. I was trying to write an instance of MyAwesomeClass that looked like this: [DataContract] public class MyAwesomeClass { [DataMember] public ObservableCollection<MyMagicItemsClass> GreatItems { get; set; }   [DataMember] public ObservableCollection<MyMagicItemsClass> SuperbItems { get; set; }     public MyAwesomeClass { GreatItems = new ObservableCollection<MyMagicItemsClass>(); SuperbItems = new ObservableCollection<MyMagicItemsClass>(); } }   That’s all well and fine. And MyMagicItemsClass was also public with a parameterless public constructor. It too had DataContractAttribute applied to it and it had DataMemberAttribute applied to all the properties and fields I wanted to serialize. Everything should be cool, but it’s not because I keep getting that “not public” exception. I could tell you about all the things I tried (generating a List<T> on the fly to make sure it wasn’t ObservableCollection<T>, trying to serialize the the Collections directly, moving it all to a separate library project, etc.), but I want to keep this short. In the end, I remembered my the “Debug->Exceptions…” VS menu option that brings up the list of exception-related circumstances under which the Visual Studio debugger will break. I checked the “Thrown” checkbox for “Common Language Runtime Exceptions”, started the project under the debugger, and voilà: the true problem revealed itself. Some of my properties had fairly elaborate setters whose logic I wanted to ignore. So for some of them, I applied an IgnoreDataMember attribute to them and applied the DataMember attribute to the underlying fields instead. All of which, in line with good programming practices, were private. Well, it just so happens that WP7 apps run in a “partial trust” environment and outside of “full trust”-land, DataContractSerializer refuses to serialize or deserialize non-public members. Of course that exception was swallowed up internally by .NET so all I ever saw was that bizarre message about things that I knew for certain were public being “not public”. I changed all the private fields I was serializing to public and everything worked just fine. In hindsight it all makes perfect sense. The serializer uses reflection to build up its graph of the object in order to write it out. In partial trust, you don’t want people using reflection to get at non-public members of an object since there are potential security problems with allowing that (you could break out of the sandbox pretty quickly by reflecting and calling the appropriate methods and cause some havoc by reflecting and setting the appropriate fields in certain circumstances. The fact that you cannot reflect your own assembly seems a bit heavy-handed, but then again I’m not a compiler writer or a framework designer and I have no idea what sorts of difficulties would go into allowing that from a compilation standpoint or what sorts of security problems allowing that could present (if any). So, lesson learned. If you get an incomprehensible exception message, turn on break on all thrown exceptions and try running it again (it might take a couple of tries, depending) and see what pops out. Chances are you’ll find the buried exception that actually explains what was going on. And if you’re getting a weird exception when trying to use DataContractSerializer complaining about public types not being public, chances are you’re trying to serialize a private or protected field/property.

  Read the article

• Launching Ops Center 12c

  - by user12601629

  Oracle Enterprise Manager Ops Center 12c is most ambitious version of the Ops Center tooling that we've ever released. I think that make it appropriate that we launched it in grand style! When it became clear we were going to be complete with the 12c final release about this time of year, the marketing team proposed that we roll the launch of 12c into Oracle OpenWorld Tokyo.  I thought that sounded like a fine idea!  You see, I have always loved Japan.  I even studied a bit of Japanese language back in school. OpenWorld Tokyo was an outstanding even this year.  It was held in Roppongi, one of the most stylish districts in Tokyo. And, to make things even better, the Sakura (cherry blossoms) were blooming.  If you've never been in Japan for cherry blossom season, it's a must see!  Here are a couple of pics for you. Here is a picture from Roppongi, near the conference.  Here's a picture near the Imperial Palace.  A couple of friends from the local sales team took me here before my flight out. So, now back to the product launch! We choose to launch the product in John Fowler's "Engineered Systems" keynote address.  It made perfect sense because of the close ties of Ops Center to the Systems portfolio of products.  It was a packed house for the keynote.  Here's a picture I took just before we started -- there were also hundreds more people in "overflow" rooms in other parts of the venue. Here's a picture of me on stage during the launch. While there are countless new features in Ops Center 12c that customers will love, I had to limit myself to discussing just three. Mission Critical Clouds Solaris 11 Engineered Systems So, what does Mission Critical Cloud mean?  It means we've expanded EM's cloud capabilities in a couple of key areas. First, we've expanded the "self service provisioning" capabilities we have to include SPARC -- not just x86.  Now you can build clouds of Solaris Zones with ease!  Second, we've much more deeply integrated high-end storage and network management into the cloud layers.  These may our IaaS story is now much more powerful! For Solaris 11, we didn't simply port our monitoring agent to S11.  That would have been easy, but also boring! We support S11 deeply.  Full access to the power of the IPS packaging system, the new virtualized networking stack, new Zones features, the Auto Install framework.  If you're ready to try Solaris 11 then Ops Center is ready for you. Last is on the area of Engineered Systems.  These combinations of hardware and software are fast and powerful. However, we're also on a mission to make them ever easier to manage.  We've made major strides with Ops Center 12c. Manage these systems as racks, not individual components.  The new capabilities for the new engineered systems like Exalogic and SPARC SuperCluster and striking. You can read more here: Oracle Unveils Oracle Enterprise Manager Ops Center 12c So, I'll wrap this up with one final bit of fun. One of my friends from the Oracle marketing department found a super cool place to get dinner.  It's a restaurant called Gonpachi. It turns out this is the place that inspired the scene in the Quentin Taratino movie Kill Bill where Uma Thurman fights 88 Ninjas.  Here is a picture I snapped while we were there. It was surely a good time. Check it out next time you're in Tokyo.

  Read the article

• Two Candidates + One Job = Two Different Outcomes

  - by david.talamelli

  Recruiters have always headhunted (sidenote: I do not like this word, in general I think the type of people who use the phrase “headhunting” are the ones who are trying to sound more important than what they likely are). Any serious Recruiter engages in direct recruiting activity, it is part and parcel of the business it is not something unique. With the uptake in Social Media the past 4-5 years, we have seen an increase in the number of Recruiters proactively reaching out to people about job opportunities. We have also seen this activity increase across all levels of hire, from help desk roles to C-Level Executives. While getting approached about a role can be a nice boost to a person’s ego, do not let it give you an inflated sense of entitlement. It is The way that people handle themselves during these calls and subsequent interviews will have a large impact on their potential to land that job. Last week I spoke to two very different candidates, both about the same position and both with very different outcomes. On paper, Candidate #1 looked fantastic; they ticked many of the boxes that we were looking for. The person is working at global IT company and working in a similar role as the one we were hiring for but not in as senior as the role we had. This role would have been the perfect step to getting involved in more complex work for the person. Candidate #2 had less polished IT experience, ticked some of the boxes we were looking for and on paper in comparison to Candidate #1 was not as close a fit as Candidate #1 was. It seemed like I was comparing apples and oranges. After speaking to both candidates it turns out I was comparing apples and oranges except the person better suited for our role was not the one I was expecting it would be. The first candidate on paper looked great – they had the experience we were looking for and appeared to be just right for the role, but after talking to them, they gave me the impression that they thought the world owed them. The impression I was left with was that they did not equate success with hard work, they seemed more interested in “what is in it for me”. Rather than having a proper conversation with me, I was often cut off and asked to hurry it up when explaining our business, what we are doing, etc... . This person seemed more interested in the job title and money than how rather than think about ways to make the role successful. Candidate #2 who had limited experience, made up for any perceived lack of experience and them some with a demonstrated motivation to succeed and do the things needed to make that happen. Candidate #2 made a great first impression, they did not seem afraid of hard work and demonstrated a “team player” attitude. In talking to them they kept me engaged, listened and asked thoughtful questions that made me think this is the type of person who creates their own luck and who would thrive in a place like Oracle. Skills, capabilities, experience and a good resume can certainly get your foot in the door, but the wrong attitude or approach to work can close those opportunities just as easily. On the other hand, hard work, effort and a genuine work ethic may help open those doors that would otherwise closed for you. A resume with all the credentials gets you in the front door but that is just the beginning of the process. It is not how we start the race that is important, it’s how things end that matter most.

  Read the article

• How do I use setFilmSize in panda3d to achieve the correct view?

  - by lhk

  I'm working with Panda3d and recently switched my game to isometric rendering. I moved the virtual camera accordingly and set an orthographic lens. Then I implemented the classes "Map" and "Canvas". A canvas is a dynamically generated mesh: a flat quad. I'm using it to render the ingame graphics. Since the game itself is still set in a 3d coordinate system I'm planning to rely on these canvases to draw sprites. I could have named this class "Tile" but as I'd like to use it for non-tile sketches (enemies, environment) as well I thought canvas would describe it's function better. Map does exactly what it's name suggests. Its constructor receives the number of rows and columns and then creates a standard isometric map. It uses the canvas class for tiles. I'm planning to write a map importer that reads a file to create maps on the fly. Here's the canvas implementation: class Canvas: def __init__(self, texture, vertical=False, width=1,height=1): # create the mesh format=GeomVertexFormat.getV3t2() format = GeomVertexFormat.registerFormat(format) vdata=GeomVertexData("node-vertices", format, Geom.UHStatic) vertex = GeomVertexWriter(vdata, 'vertex') texcoord = GeomVertexWriter(vdata, 'texcoord') # add the vertices for a flat quad vertex.addData3f(1, 0, 0) texcoord.addData2f(1, 0) vertex.addData3f(1, 1, 0) texcoord.addData2f(1, 1) vertex.addData3f(0, 1, 0) texcoord.addData2f(0, 1) vertex.addData3f(0, 0, 0) texcoord.addData2f(0, 0) prim = GeomTriangles(Geom.UHStatic) prim.addVertices(0, 1, 2) prim.addVertices(2, 3, 0) self.geom = Geom(vdata) self.geom.addPrimitive(prim) self.node = GeomNode('node') self.node.addGeom(self.geom) # this is the handle for the canvas self.nodePath=NodePath(self.node) self.nodePath.setSx(width) self.nodePath.setSy(height) if vertical: self.nodePath.setP(90) # the most important part: "Drawing" the image self.texture=loader.loadTexture(""+texture+".png") self.nodePath.setTexture(self.texture) Now the code for the Map class class Map: def __init__(self,rows,columns,size): self.grid=[] for i in range(rows): self.grid.append([]) for j in range(columns): # create a canvas for the tile. For testing the texture is preset tile=Canvas(texture="../assets/textures/flat_concrete",width=size,height=size) x=(i-1)*size y=(j-1)*size # set the tile up for rendering tile.nodePath.reparentTo(render) tile.nodePath.setX(x) tile.nodePath.setY(y) # and store it for later access self.grid[i].append(tile) And finally the usage def loadMap(self): self.map=Map(10, 10, 1) this function is called within the constructor of the World class. The instantiation of world is the entry point to the execution. The code is pretty straightforward and runs good. Sadly the output is not as expected: Please note: The problem is not the white rectangle, it's my player object. The problem is that although the map should have equal width and height it's stretched weirdly. With orthographic rendering I expected the map to be a perfect square. What did I do wrong ? UPDATE: I've changed the viewport. This is how I set up the orthographic camera: lens = OrthographicLens() lens.setFilmSize(40, 20) base.cam.node().setLens(lens) You can change the "aspect" by modifying the parameters of setFilmSize. I don't know exactly how they are related to window size and screen resolution but after testing a little the values above seem to work for me. Now everything is rendered correctly as long as I don't resize the window. Every change of the window's size as well as switching to fullscreen destroys the correct rendering. I know that implementing a listener for resize events is not in the scope of this question. However I wonder why I need to make the Film's height two times bigger than its width. My window is quadratic ! Can you tell me how to find out correct setting for the FilmSize ? UPDATE 2: I can imagine that it's hard to envision the behaviour of the game. At first glance the obvious solution is to pass the window's width and height in pixels to setFilmSize. There are two problems with that approach. The parameters for setFilmSize are ingame units. You'll get a way to big view if you pass the pixel size For some strange reason the image is distorted if you pass equal values for width and height. Here's the output for setFilmSize(800,800) You'll have to stress your eyes but you'll see what I mean

  Read the article

• ASP.NET: Using pickup directory for outgoing e-mails

  - by DigiMortal

  Sending e-mails out from web applications is very common task. When we are working on or test our systems with real e-mail addresses we don’t want recipients to receive e-mails (specially if we are using some subset of real data9. In this posting I will show you how to make ASP.NET SMTP client to write e-mails to disc instead of sending them out. SMTP settings for web application I have seen many times the code where all SMTP information is kept in app settings just to read them in code and give to SMTP client. It is not necessary because we can define all these settings under system.web => mailsettings node. If you are using web.config to keep SMTP settings then all you have to do in your code is just to create SmtpClient with empty constructor. var smtpClient = new SmtpClient(); Empty constructor means that all settings are read from web.config file. What is pickup directory? If you want drastically raise e-mail throughput of your SMTP server then it is not very wise plan to communicate with it using SMTP protocol. it adds only additional overhead to your network and SMTP server. Okay, clients make connections, send messages out and it is also overhead we can avoid. If clients write their e-mails to some folder that SMTP server can access then SMTP server has e-mail forwarding as only resource-eager task to do. File operations are way faster than communication over SMTP protocol. The directory where clients write their e-mails as files is called pickup directory. By example, Exchange server has support for pickup directories. And as there are applications with a lot of users who want e-mail notifications then .NET SMTP client supports writing e-mails to pickup directory instead of sending them out. How to configure ASP.NET SMTP to use pickup directory? Let’s say, it is more than easy. It is very easy. This is all you need. <system.net>   <mailSettings>     <smtp deliveryMethod="SpecifiedPickupDirectory">       <specifiedPickupDirectory pickupDirectoryLocation="c:\temp\maildrop\"/>     </smtp>   </mailSettings> </system.net> Now make sure you don’t miss come points: Pickup directory must physically exist because it is not created automatically. IIS (or Cassini) must have write permissions to pickup directory. Go through your code and look for hardcoded SMTP settings. Also take a look at all places in your code where you send out e-mails that there are not some custom settings used for SMTP! Also don’t forget that your mails will be written now to pickup directory and they are not sent out to recipients anymore. Advanced scenario: configuring SMTP client in code In some advanced scenarios you may need to support multiple SMTP servers. If configuration is dynamic or it is not kept in web.config you need to initialize your SmtpClient in code. This is all you need to do. var smtpClient = new SmtpClient(); smtpClient.DeliveryMethod = SmtpDeliveryMethod.SpecifiedPickupDirectory; smtpClient.PickupDirectoryLocation = pickupFolder; Easy, isn’t it? i like when advanced scenarios end up with simple and elegant solutions but not with rocket science. Note for IIS SMTP service SMTP service of IIS is also able to use pickup directory. If you have set up IIS with SMTP service you can configure your ASP.NET application to use IIS pickup folder. In this case you have to use the following setting for delivery method. SmtpDeliveryMethod.PickupDirectoryFromIis You can set this setting also in web.config file. <system.net>   <mailSettings>     <smtp deliveryMethod="PickupDirectoryFromIis" />   </mailSettings> </system.net> Conclusion Who was still using different methods to avoid sending e-mails out in development or testing environment can now remove all the bad code from application and live on mail settings of ASP.NET. It is easy to configure and you have less code to support e-mails when you use built-in e-mail features wisely.

  Read the article

• What Keeps You from Changing Your Public IP Address and Wreaking Havoc on the Internet?

  - by Jason Fitzpatrick

  What exactly is preventing you (or anyone else) from changing their IP address and causing all sorts of headaches for ISPs and other Internet users? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Whitemage is curious about what’s preventing him from wantonly changing his IP address and causing trouble: An interesting question was asked of me and I did not know what to answer. So I’ll ask here. Let’s say I subscribed to an ISP and I’m using cable internet access. The ISP gives me a public IP address of 60.61.62.63. What keeps me from changing this IP address to, let’s say, 60.61.62.75, and messing with another consumer’s internet access? For the sake of this argument, let’s say that this other IP address is also owned by the same ISP. Also, let’s assume that it’s possible for me to go into the cable modem settings and manually change the IP address. Under a business contract where you are allocated static addresses, you are also assigned a default gateway, a network address and a broadcast address. So that’s 3 addresses the ISP “loses” to you. That seems very wasteful for dynamically assigned IP addresses, which the majority of customers are. Could they simply be using static arps? ACLs? Other simple mechanisms? Two things to investigate here, why can’t we just go around changing our addresses, and is the assignment process as wasteful as it seems? The Answer SuperUser contributor Moses offers some insight: Cable modems aren’t like your home router (ie. they don’t have a web interface with simple point-and-click buttons that any kid can “hack” into). Cable modems are “looked up” and located by their MAC address by the ISP, and are typically accessed by technicians using proprietary software that only they have access to, that only runs on their servers, and therefore can’t really be stolen. Cable modems also authenticate and cross-check settings with the ISPs servers. The server has to tell the modem whether it’s settings (and location on the cable network) are valid, and simply sets it to what the ISP has it set it for (bandwidth, DHCP allocations, etc). For instance, when you tell your ISP “I would like a static IP, please.”, they allocate one to the modem through their servers, and the modem allows you to use that IP. Same with bandwidth changes, for instance. To do what you are suggesting, you would likely have to break into the servers at the ISP and change what it has set up for your modem. Could they simply be using static arps? ACLs? Other simple mechanisms? Every ISP is different, both in practice and how close they are with the larger network that is providing service to them. Depending on those factors, they could be using a combination of ACL and static ARP. It also depends on the technology in the cable network itself. The ISP I worked for used some form of ACL, but that knowledge was a little beyond my paygrade. I only got to work with the technician’s interface and do routine maintenance and service changes. What keeps me from changing this IP address to, let’s say, 60.61.62.75 and mess with another consumer’s internet access? Given the above, what keeps you from changing your IP to one that your ISP hasn’t specifically given to you is a server that is instructing your modem what it can and can’t do. Even if you somehow broke into the modem, if 60.61.62.75 is already allocated to another customer, then the server will simply tell your modem that it can’t have it. David Schwartz offers some additional insight with a link to a white paper for the really curious: Most modern ISPs (last 13 years or so) will not accept traffic from a customer connection with a source IP address they would not route to that customer were it the destination IP address. This is called “reverse path forwarding”. See BCP 38. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

  Read the article

• Cloud Backup: Getting the Users' Backs Up

  - by Tony Davis

  On Wednesday last week, Microsoft announced that as of July 1, all data transfers into its Microsoft Azure cloud will be free (though you have to pay for transferring data out). On Thursday last week, SQL Azure in Western Europe went down. It was a relatively short outage, but since SQL Azure currently provides no easy way to take a standard backup of a database and store it locally, many people had no recourse but to wait patiently for their cloud-based app to resume. It seems that Microsoft are very keen encourage developers to move their data onto their cloud, but are developers ready to do it, given that such basic backup capabilities are lacking? Recently on Simple-Talk, Mike Mooney described a perfect use case for the Microsoft Cloud. They had a simple web-based application with a SQL Server backend; they could move the application to Windows Azure, and the data into SQL Azure and in the process free themselves from much of the hassle surrounding management and scaling of the hardware, network and so on. It was a great fit and yet it nearly didn't happen; lack of support for the BACKUP command almost proved a show-stopper. Of course, backups of Azure databases are always and have always been taken automatically, for disaster recovery purposes, but these are strictly on-cloud copies and as of now it is not possible to use them to them to restore a database to a particular point in time. It seems that none of those clever Microsoft people managed to predict the need to perform basic backups of Azure databases so that copies could be stored locally, outside the Azure universe. At the very least, as Mike points out, performing a local backup before a new deployment is more or less mandatory. Microsoft did at least note the sound of gnashing teeth and, as a stop-gap measure, offered SQL Azure Database Copy which basically allows you to create an online clone of your database, but this doesn't allow for storing local archives of the data. To that end MS has provided SQL Azure Import/Export, to package up and export a database and its data, using BACPACs. These BACPACs do not guarantee transactional consistency; for example, if a child table is modified after the parent is copied, then the copied database will be in inconsistent state (meaning, to add to the fun, BACPACs need to be created from a database copy). In any event, widespread problems with BACPAC's evil cousin, the DACPAC have been well-documented, and it seems likely that many will also give BACPAC the bum's rush. Finally, in a TechEd 2011 presentation tagged "SQL Azure Advanced Administration", it was announced that "backup and restore" were coming in the next SQL Azure CTP. And yet this still doesn't mean that we'll get simple backups as DBAs know and love them. What it does mean, at least, is the ability to restore any given database to a point in time within a 2-week window. For the time being, if you want a local copy of your data and don't want to brave the BACPAC, one is left with SSIS or BCP, creative use of schema and data comparison tools, or use of SQL Azure Backup (currently in beta) in order to perform this simple but vital task. Cheers, Tony.

  Read the article

• How to recover after embarrassing yourself and your company?

  - by gaearon

  I work in an outsourcing company in Russia, and one of our clients is a financial company located in USA. For the last six months I have been working on several projects for this particular company, and as I was being assigned a larger project, I was invited to work onsite in USA in order to understand and learn the new system. Things didn't work out as well as I hoped because the environment was messy after original developers, and I had to spent quite some time to understand the quirks. However we managed to do the release several days ago, and it looks like everything's going pretty smooth. From technical perspective, my client seems to be happy with me. My solutions seem to work, and I always try to add some spark of creativity to what I do. However I'm very disorganized in a certain sense, as I believe many of you fellas are. Let me note that my current job is my first job ever, and I was lucky enough to get a job with flexible schedule, meaning I can come in and out of the office whenever I want as long as I have 40 hours a week filled. Sometimes I want to hang out with friends in the evening, and days after that I like to have a good sleep in the morning—this is why flexible schedule (or lack of one) is ideal fit for me. [I just realized this paragraph looks too serious, I should've decorated it with some UNICORNS!] Of course, after coming to the USA, things changed. This is not some software company with special treatment for the nerdy ones. Here you have to get up at 7:30 AM to get to the office by 9 AM and then sit through till 5 PM. Personally, I hate waking up in the morning, not to say my productivity begins to climb no sooner than at 5 o'clock, i.e. I'm very slow until I have to go, which is ironic. Sometimes I even stay for more than 8 hours just to finish my current stuff without interruptions. Anyway, I could deal with that. After all, they are paying for my trip, who am I to complain? They need me to be in their working hours to be able to discuss stuff. It makes perfect sense that fixed schedule doesn't make any sense for me. But it does makes sense that it does make sense for my client. And I am here for client, therefore sense is transferred. Awww, you got it. I was asked several times to come exactly at 9 AM but out of laziness and arrogance I didn't take these requests seriously enough. This paid off in the end—on my last day I woke up 10 minutes before final status meeting with business owner, having overslept previous day as well. Of course this made several people mad, including my client, as I ignored his direct request to come in time for two days in the row, including my final day. Of course, I didn't do it deliberately but certainly I could've ensured that I have at least two alarms to wake me up, et cetera...I didn't do that. He also emailed my boss, calling my behavior ridiculous and embarrassing for my company and saying “he's not happy with my professionalism at all”. My boss told me that “the system must work both in and out” and suggested me to stay till late night this day working in a berserker mode, fixing as many issues as possible, and sending a status email to my client. So I did, but I didn't receive the response yet. These are my questions to the great programmers community: Did you have situations where your ignorance and personal non-technical faults created problems for your company? Were you able to make up for your fault and stay in a good relationship with your client or boss? How? How would you act if you were in my situation?

  Read the article

• dynamic? I'll never use that ... or then again, maybe it could ...

  - by adweigert

  So, I don't know about you, but I was highly skeptical of the dynamic keywork when it was announced. I thought to myself, oh great, just another move towards VB compliance. Well after seeing it being used in things like DynamicXml (which I use for this example) I then was working with a MVC controller and wanted to move some things like operation timeout of an action to a configuration file. Thinking big picture, it'd be really nice to have configuration for all my controllers like that. Ugh, I don't want to have to create all those ConfigurationElement objects... So, I started thinking self, use what you know and do something cool ... Well after a bit of zoning out, self came up with use a dynamic object duh! I was thinking of a config like this ...<controllers> <add type="MyApp.Web.Areas.ComputerManagement.Controllers.MyController, MyApp.Web"> <detail timeout="00:00:30" /> </add> </controllers> So, I ended up with a couple configuration classes like this ...blic abstract class DynamicConfigurationElement : ConfigurationElement { protected DynamicConfigurationElement() { this.DynamicObject = new DynamicConfiguration(); } public DynamicConfiguration DynamicObject { get; private set; } protected override bool OnDeserializeUnrecognizedAttribute(string name, string value) { this.DynamicObject.Add(name, value); return true; } protected override bool OnDeserializeUnrecognizedElement(string elementName, XmlReader reader) { this.DynamicObject.Add(elementName, new DynamicXml((XElement)XElement.ReadFrom(reader))); return true; } } public class ControllerConfigurationElement : DynamicConfigurationElement { [ConfigurationProperty("type", Options = ConfigurationPropertyOptions.IsRequired | ConfigurationPropertyOptions.IsKey)] public string TypeName { get { return (string)this["type"]; } } public Type Type { get { return Type.GetType(this.TypeName, true); } } } public class ControllerConfigurationElementCollection : ConfigurationElementCollection { protected override ConfigurationElement CreateNewElement() { return new ControllerConfigurationElement(); } protected override object GetElementKey(ConfigurationElement element) { return ((ControllerConfigurationElement)element).Type; } } And then had to create the meat of the DynamicConfiguration class which looks like this ...public class DynamicConfiguration : DynamicObject { private Dictionary<string, object> properties = new Dictionary<string, object>(StringComparer.CurrentCultureIgnoreCase); internal void Add<T>(string name, T value) { this.properties.Add(name, value); } public override bool TryGetMember(GetMemberBinder binder, out object result) { var propertyName = binder.Name; result = null; if (this.properties.ContainsKey(propertyName)) { result = this.properties[propertyName]; } return true; } } So all being said, I made a base controller class like a good little MVC-itizen ...public abstract class BaseController : Controller { protected BaseController() : base() { var configuration = ManagementConfigurationSection.GetInstance(); var controllerConfiguration = configuration.Controllers.ForType(this.GetType()); if (controllerConfiguration != null) { this.Configuration = controllerConfiguration.DynamicObject; } } public dynamic Configuration { get; private set; } } And used it like this ...public class MyController : BaseController { static readonly string DefaultDetailTimeout = TimeSpan.MaxValue.ToString(); public MyController() { this.DetailTimeout = TimeSpan.Parse(this.Configuration.Detail.Timeout ?? DefaultDetailTimeout); } public TimeSpan DetailTimeout { get; private set; } } And there I have an actual use for the dynamic keyword ... never thoguht I'd see the day when I first heard of it as I don't do much COM work ... oh dont' forget this little helper extension methods to find the controller configuration by the controller type.public static ControllerConfigurationElement ForType<T>(this ControllerConfigurationElementCollection collection) { Contract.Requires(collection != null); return ForType(collection, typeof(T)); } public static ControllerConfigurationElement ForType(this ControllerConfigurationElementCollection collection, Type type) { Contract.Requires(collection != null); Contract.Requires(type != null); return collection.Cast<ControllerConfigurationElement>().Where(element => element.Type == type).SingleOrDefault(); } Sure, it isn't perfect and I'm sure I can tweak it over time, but I thought it was a pretty cool way to take advantage of the dynamic keyword functionality. Just remember, it only validates you did it right at runtime, which isn't that bad ... is it? And yes, I did make it case-insensitive so my code didn't have to look like my XML objects, tweak it to your liking if you dare to use this creation.

  Read the article

• Notes from a short presentation on NodeJs

  - by Aligned

  Originally posted on: http://geekswithblogs.net/Aligned/archive/2014/05/30/notes-from-a-short-presentation-on-nodejs.aspxI volunteered myself to give a short 30 minute presentation at a work lunch and learn on NodeJs. With my limited experience I see using Node as a great tool for build process improvement, scaffolding with yeoman, and running tests with Karma. I haven’t looked into using as a full server or development stack. I guess I’m too stuck on IIS and Visual Studio :-). Here are my notes, that aren’t very well formatted, but I wanted to share it anyways. What is it? "Node.js is a platform built on Chrome's JavaScript runtime for easily building fast, scalable network applications. Node.js uses an event-driven, non-blocking I/O model that makes it lightweight and efficient, perfect for data-intensive real-time applications that run across distributed devices." Why should you be interested? another popular tool that can help you get the job done you can use the command prompt! can be run at build or release time to automate tasks What are some uses? https://www.npmjs.org/ - NuGet for Node packages http://bower.io/ - NuGet for UI JavaScript libraries (jQuery, Bootstrap, Angular, etc) http://yeoman.io/ "Our workflow is comprised of three tools for improving your productivity and satisfaction when building a web app: yo (the scaffolding tool), grunt (the build tool) and bower (for package management)." -> yeoman asks which components you want alternative - http://joakimbeng.eu01.aws.af.cm/slush-replacing-yeoman-with-gulp/ https://www.npmjs.org/package/generator-cg-angular - phantom js, less, // git is needed for bower http://git-scm.com/ run installer in Windows before you can use bower // select Run Git from the Windows Command Prompt in the installer // requires a reboot http://stackoverflow.com/questions/20069297/bower-git-not-in-the-path-error npm install -g git npm install -g yo npm install -g generator-cg-angular mkdir myapp cd myapp yo cg-angular npm install -g bower npm install -g grunt-cli yo bower grunt serve grunt test grunt build // there are many generators (generator-angular) is another one // I like the Nuget HotTowel-Angular from John Papa myself // needed IIS Node for Express -> prompt from WebMatrix Karma bat to startup Karma - see below image compression - https://www.npmjs.org/search?q=optimize+images, https://github.com/heldr/node-smushit - do it from the command line LESS compiling js and css combine and minification at build with Gulp for requireJS apps quick lightweight HTTP server - "Express" Build pipeline with Grunt or Gulp http://www.johnpapa.net/gulp-and-grunt-at-anglebrackets/ Gulp is the newer and improved over Grunt. Supposed to be easier to use, but Grunt is more established. https://github.com/johnpapa/ng-demos/tree/master/grunt-gulp https://github.com/assetgraph/assetgraph-builder Does a lot of the minimizing, combining, image optimization etc using Node. Looks interesting.... http://nodejs.org http://nodeschool.io/ http://sub.watchmecode.net/getting-started-with-nodejs-installing-and-writing-your-first-code/ https://stormpath.com/blog/build-a-killer-node-dot-js-client-for-your-rest-plus-json-api/ https://codio.com/ http://www.hanselman.com/blog/ItsJustASoftwareIssueEdgejsBringsNodeAndNETTogetherOnThreePlatforms.aspx run unit tests - Karma in msBuild karma-start.bat @echo off cd %~dp0\.. REM 604800 is to make sure we only update once every 7 days call npm install --cache-min 604800 -g grunt-cli call npm install --cache-min 604800 call npm install --cache-min 604800 -g karma-cli karma start UnitTests\karma.conf.js REM karma start UnitTests\karma.conf.js --single-run REM see karma-start.bat and karam.config.js REM jsHint comes from Nuget

  Read the article

• Scenarios for Throwing Exceptions

  - by Joe Mayo

  I recently came across a situation where someone had an opinion that differed from mine of when an exception should be thrown. This particular case was an issue opened on LINQ to Twitter for an Exception on EndSession.  The premise of the issue was that the poster didn’t feel an exception should be raised, regardless of authentication status.  As first, this sounded like a valid point.  However, I went back to review my code and decided not to make any changes. Here's my rationale: 1. The exception doesn’t occur if the user is authenticated when EndAccountSession is called. 2. The exception does occur if the user is not authenticated when EndAccountSession is called. 3. The exception represents the fact that EndAccountSession is not able to fulfill its intended purpose - to end the session.  If a session never existed, then it would not be possible to perform the requested action.  Therefore, an exception is appropriate. To help illustrate how to handle this situation, I've modified the following code in Program.cs in the LinqToTwitterDemo project to illustrate the situation: static void EndSession(ITwitterAuthorizer auth) { using (var twitterCtx = new TwitterContext(auth, "https://api.twitter.com/1/", "https://search.twitter.com/")) { try { //Log twitterCtx.Log = Console.Out; var status = twitterCtx.EndAccountSession(); Console.WriteLine("Request: {0}, Error: {1}" , status.Request , status.Error); } catch (TwitterQueryException tqe) { var webEx = tqe.InnerException as WebException; if (webEx != null) { var webResp = webEx.Response as HttpWebResponse; if (webResp != null && webResp.StatusCode == HttpStatusCode.Unauthorized) Console.WriteLine("Twitter didn't recognize you as having been logged in. Therefore, your request to end session is illogical.\n"); } var status = tqe.Response; Console.WriteLine("Request: {0}, Error: {1}" , status.Request , status.Error); } } } As expected, LINQ to Twitter wraps the exception in a TwitterQueryException as the InnerException.  The TwitterQueryException serves a very useful purpose through it's Response property.  Notice in the example above that the response has Request and Error proprieties.  These properties correspond to the information that Twitter returns as part of it's response payload.  This is often useful while debugging to help you understand why Twitter was unable to perform the  requested action.  Other times, it's cryptic, but that's another story.  At least you have some way of knowing in your code how to anticipate and handle these situations, along with having extra information to debug with. To sum things up, there are two points to make: when and why an exception should be raised and when to wrap and re-throw an exception in a custom exception type. I felt it was necessary to allow the exception to be raised because the called method was unable to perform the task it was designed for.  I also felt that it is inappropriate for a general library to do anything with exceptions because that could potentially hide a problem from the caller.  A related point is that it should be the exclusive decision of the application that uses the library on what to do with an exception.  Another aspect of this situation is that I wrapped the exception in a custom exception and re-threw.  This is a tough call because I don’t want to hide any stack trace information.  However, the need to make the exception more meaningful by including vital information returned from Twitter swayed me in the direction to design an interface that was as helpful as possible to library consumers.  As shown in the code above, you can dig into the exception and pull out a lot of good information, such as the fact that the underlying HTTP response was a 401 Unauthorized.  In all, trade-offs are seldom perfect for all cases, but combining the fact that the method was unable to perform its intended function, this is a library, and the extra information can be more helpful, it seemed to be the better design. @JoeMayo

  Read the article

• Reducing Deadlocks - not a DBA issue ?

  - by steveh99999

   As a DBA, I'm involved on an almost daily basis troubleshooting 'SQL Server' performance issues. Often, this troubleshooting soon veers away from a 'its a SQL Server issue' to instead become a wider application/database design/coding issue.One common perception with SQL Server is that deadlocking is an application design issue - and is fixed by recoding...  I see this reinforced by MCP-type questions/scenarios where the answer to prevent deadlocking is simply to change the order in code in which tables are accessed....Whilst this is correct, I do think this has led to a situation where many 'operational' or 'production support' DBAs, when faced with a deadlock, are happy to throw the issue over to developers without analysing the issue further....A couple of 'war stories' on deadlocks which I think are interesting :- Case One , I had an issue recently on a third-party application that I support on SQL 2008.  This particular third-party application has an unusual support agreement where the customer is allowed to change the index design on the third-party provided database.  However, we are not allowed to alter application code or modify table structure..This third-party application is also known to encounter occasional deadlocks – indeed, I have documentation from the vendor that up to 50 deadlocks per day is not unusual !So, as a DBA I have to support an application which in my opinion has too many deadlocks - but, I cannot influence the design of the tables or stored procedures for the application. This should be the classic - blame the third-party developers scenario, and hope this issue gets addressed in a future application release - ie we could wait years for this to be resolved and implemented in our production environment...But, as DBAs  can change the index layout, is there anything I could do still to reduce the deadlocks in the application ?I initially used SQL traceflag 1222 to write deadlock detection output to the SQL Errorlog – using this I was able to identify one table heavily involved in the deadlocks.When I examined the table definition, I was surprised to see it was a heap – ie no clustered index existed on the table.Using SQL profiler to see locking behaviour and plan for the query involved in the deadlock, I was able to confirm a table scan was being performed.By creating an appropriate clustered index - it was possible to produce a more efficient plan and locking behaviour.So, less locks, held for less time = less possibility of deadlocks. I'm still unhappy about the overall number of deadlocks on this system - but that's something to be discussed further with the vendor.Case Two,  a system which hadn't changed for months suddenly started seeing deadlocks on a regular basis. I love the 'nothing's changed' scenario, as it gives me the opportunity to appear wise and say 'nothings changed on this system, except the data'.. This particular deadlock occurred on a table which had been growing rapidly. By using DBCC SHOW_STATISTICS - the DBA team were able to see that the deadlocks seemed to be occurring shortly after auto-update stats had regenerated the table statistics using it's default sampling behaviour.As a quick fix, we were able to schedule a nightly UPDATE STATISTICS WITH FULLSCAN on the table involved in the deadlock - thus, greatly reducing the potential for stats to be updated via auto_update_stats, consequently reducing the potential for a bad plan to be generated based on an unrepresentative sample of the data. This reduced the possibility of a deadlock occurring.  Not a perfect solution by any means, but quick, easy to implement, and needed no application code changes. This fix gave us some 'breathing space'  to properly fix the code during the next scheduled application release.   The moral of this post - don't dismiss deadlocks as issues that can only be fixed by developers...

  Read the article

• Take Snapshots of Your Favorite Movie Scenes in VLC

  - by DigitalGeekery

  Have you ever wanted to grab a screenshot of your favorite TV or movie scene? Today we’ll show you how to do so with VLC Media Player. If you don’t have it already, download and install the latest version of VLC (link below). Start playing your movie, and to grab a snapshot, select Video from the menu and click Snapshot.   When you take a snapshot, by default a preview is displayed at the top left and the folder where the file is saved is briefly displayed on the screen. If you enable the Advanced Controls, you can take a snapshot with a click of a button, and advance the video frame by frame to get a more accurate shot. To enable the Advanced Controls, select View and Advanced Controls.   You’ll see the Advanced Controls buttons appear below the slider. Now just click on the Snapshot button to grab an image.   You can more easily control the frame you wish to grab by pressing the Frame by Frame button. You can pause the movie when it is near the perfect spot for your snapshot, and then press the Frame by Frame button to advance a single frame at a time. By default, the snapshots are saved as PNG files in your My Pictures folder in Windows. You can change those setting in the Preferences. First, you’ll need to select All under Show settings at the bottom. Then click on Video on the left. Scroll down a bit and you’ll see the Snapshot section. Here you can change the format from PNG to JPG, change the directory to which the snapshots are stored, turn on and off the preview, and change the filename prefix. Click Save when finished.   Now you have nice screenshots of your favorite movie to display as you wish…such as a Desktop Background!   VLC is an excellent media player that runs on Windows, Mac, and Linux. In addition to playing almost any media file, it also makes grabbing screenshots of your videos a breeze. Want to know more about VLC? Check out some of our previous articles like how to rip DVDs and how to set a video as your desktop wallpaper. Download the Latest version of VLC Similar Articles Productive Geek Tips Desktop Fun: Rural Scenes WallpapersAutomatically Mount and View ISO files in Windows 7 Media CenterHow to Make/Edit a movie with Windows Movie Maker in Windows VistaAdd Images and Metadata to Windows 7 Media Center Movie LibraryQuickly Find Movies to Watch at Hello Movies TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 tinysong gives a shortened URL for you to post on Twitter (or anywhere) 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes

  Read the article

• Heterogeneous Datacenter Management with Enterprise Manager 12c

  - by Joe Diemer

  The following is a Guest Blog, contributed by Bryce Kaiser, Product Manager at Blue MedoraWhen I envision a perfect datacenter, it would consist of technologies acquired from a single vendor across the entire server, middleware, application, network, and storage stack - Apps to Disk - that meets your organization’s every IT requirement with absolute best-of-breed solutions in every category.   To quote a familiar motto, your datacenter would consist of "Hardware and Software, Engineered to Work Together".  In almost all cases, practical realities dictate something far less than the IT Utopia mentioned above.   You may wish to leverage multiple vendors to keep licensing costs down, a single vendor may not have an offering in the IT category you need, or your preferred vendor may quite simply not have the solution that meets your needs.    In other words, your IT needs dictate a heterogeneous IT environment.  Heterogeneity, however, comes with additional complexity. The following are two pretty typical challenges:1) No End-to-End Visibility into the Enterprise Wide Application Deployment. Each vendor solution which is added to an infrastructure may bring its own tooling creating different consoles for different vendor applications and platforms.2) No Visibility into Performance Bottlenecks. When multiple management tools operate independently, you lose diagnostic capabilities including identifying cross-tier issues with database, hung-requests, slowness, memory leaks and hardware errors/failures causing DB/MW issues. As adoption of Oracle Enterprise Manager (EM) has increased, especially since the release of Enterprise Manager 12c, Oracle has seen an increase in the number of customers who want to leverage their investments in EM to manage non-Oracle workloads.  Enterprise Manager provides a single pane of glass view into their entire datacenter.  By creating a highly extensible framework via the Oracle EM Extensibility Development Kit (EDK), Oracle has provided the tooling for business partners such as my company Blue Medora as well as customers to easily fill gaps in the ecosystem and enhance existing solutions.  As mentioned in the previous post on the Enterprise Manager Extensibility Exchange, customers have access to an assortment of Oracle and Partner provided solutions through this Exchange, which is accessed at http://www.oracle.com/goto/emextensibility.  Currently, there are over 80 Oracle and partner provided plug-ins across the EM 11g and EM 12c versions.  Blue Medora is one of those contributing partners, for which you will find 3 of our solutions including our flagship plugin for VMware.  Let's look at Blue Medora’s VMware plug-in as an example to what I'm trying to convey.  Here is a common situation solved by true visibility into your entire stack:Symptoms•    My database is bogging down, however the database appears okay internally.  Maybe it’s starved for resources?•    My OS tooling is showing everything is “OK”.  Something doesn’t add up. Root cause•    Through the VMware plugin we can see the problem is actually on the virtualization layer Solution•    From within Enterprise Manager  -- the same tool you use for all of your database tuning -- we can overlay the data of the database target, host target, and virtual machine target for a true picture of the true root cause. Here is the console view: Perhaps your monitoring conditions are more specific to your environment.  No worries, Enterprise Manager still has you covered.  With Metric Extensions you have the “Next Generation” of User-Defined Metrics, which easily bring the power of your existing management scripts into a single console while leveraging the proven Enterprise Manager framework. Simply put, Oracle Enterprise manager boasts a growing ecosystem that provides the single pane of glass for your entire datacenter from the database and beyond.  Bryce can be contacted at [email protected]

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >