Search Results

Search found 4532 results on 182 pages for 'category theory'.

Page 117/182 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

  • Which Open Source Licenses can address concerns for an Open Source Game Engine?

    - by Chris
    I am on a team that is looking to open source an engine we are building. It's intended as an engine for Online RPG style games. We're writing it to work on both desktops and android platforms. I've been over to the OSI http://opensource.org/licenses/category to check out the most common licenses. However, this will be my first time going into an open source project and I wanted to know if the community had some insight into which licenses might be best suited. Key licensing concerns: Removing or limiting our liability (most already seem to cover this, but stating for completeness). We want other developers to be able to take part or all of our project and use it in their own projects with proper accreditation to our project. Licensing should not hinder someone's ability to quickly use the engine. They should be able to download a release and start using it without needing to wait on licensing issues. Game content (gfx, sound, etc.) that is not part of the engine should be allowed to be licensed separately. If someone is using our engine, they can retain full copy right of their content, including engine generated data. Our primary goal is exposure, which is why we're going open source to start with. Both for the project and for the individuals developing it. Are there any licenses that can require accreditation visible to players? While I'd put our primary goal as exposure, for licensing the accreditation is less of a concern. From what I've read through (and have been able to understand) it doesn't seem like any of the licenses cover anything that is produced by the licensed software. Are there any that state this specifically, or does simply not mentioning it leave it open for other licensing? Are there any other concerns that we should consider? Has anyone had any issues using any of these licenses?

    Read the article

  • Battery is drained too quickly

    - by LucaB
    I'm getting really low battery life under ubuntu, not even close to windows. I tried powertop, and I saw that my laptop is consuming in idle nearly 20 watts (a bit more). I tried to install laptop-mode-tools, change "good" into "bad" in powertop, but nothing changes. I see that I have the the HD audio output device which is running at 100% every time. Could this be the problem? This is a report from powertop. The battery reports a discharge rate of 22.8 W The estimated remaining time is 33 minutes Summary: 381.8 wakeups/second, 0.0 GPU ops/second and 0.0 VFS ops/sec Usage Events/s Category Description 3.2 ms/s 182.7 Timer tick_sched_timer 100.0% Device Audio codec hwC0D3: Intel 7.9 ms/s 25.1 Process /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background no 1.9 ms/s 24.2 Interrupt [6] tasklet(softirq) 2.9 ms/s 23.2 Process /usr/lib/chromium-browser/chromium-browser --type=zygote 8.1 ms/s 20.3 Process /usr/lib/unity/unity-panel-service 0.7 ms/s 17.4 Timer hrtimer_wakeup 4.2 ms/s 12.6 Process unity-2d-panel 604.4 µs/s 9.7 Process syndaemon -i 2.0 -K -R -t 149.7 µs/s 9.7 kWork ieee80211_iface_work 0.8 ms/s 8.7 Process metacity 19.5 ms/s 1.0 Process powertop 3.0 ms/s 6.8 Process //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session 699.0 µs/s 6.8 Process /usr/lib/thunderbird/thunderbird 4.3 ms/s 4.8 Process gnome-terminal 658.9 µs/s 2.9 Interrupt [1] timer(softirq) 75.1 µs/s 2.9 kWork iwl_bg_run_time_calib_work 163.8 µs/s 1.9 Process /usr/lib/accountsservice/accounts-daemon 70.6 µs/s 1.9 Process [ksoftirqd/2] 25.8 µs/s 1.9 Process [ksoftirqd/0] 1.0 ms/s 1.0 Process /usr/bin/python /usr/sbin/powernapd 408.2 µs/s 1.0 Process unity-2d-shell 189.8 µs/s 1.0 Process /usr/lib/chromium-browser/chromium-browser 124.4 µs/s 1.0 Process /usr/lib/unity-lens-applications/unity-applications-daemon 113.3 µs/s 1.0 Process /usr/lib/gnome-settings-daemon/gnome-settings-daemon 112.0 µs/s 1.0 Process nautilus -n 104.9 µs/s 1.0 Process /usr/lib/gvfs/gvfsd-trash --spawner :1.2 /org/gtk/gvfs/exec_spaw/0 77.5 µs/s 1.0 Process /usr/lib/x86_64-linux-gnu/colord/colord 75.6 µs/s 1.0 Process /usr/lib/gvfs/gvfs-gdu-volume-monitor 75.0 µs/s 1.0 Interrupt [53] i915 74.9 µs/s 1.0 Process /usr/lib/gvfs/gvfs-afc-volume-monitor What should I do to make the battery consumption lower?

    Read the article

  • Generalist Languages: Dying or Alive and Well?

    - by dsimcha
    Around here, it seems like there's somewhat of a consensus that generalist programming languages (that try to be good at everything, support multiple paradigms, support both very high- and very low-level programming), etc. are a bad idea, and that it's better to pick the right tool for the job and use lots of different languages. I see three major areas where this is flawed: Interfacing multiple languages is always at least a source of friction and is sometimes practically impossible. How severe a problem this is depends on how fine-grained the interfacing is. Near the boundary between the two languages, though, you're basically limited to the intersection of their features, and you have to care about things like binary interfaces that you usually wouldn't. Passing complex data structures (i.e. not just primitives and arrays of primitives) between languages is almost always a hassle. Furthermore, shifting between different syntaxes, different conventions, etc. can be confusing and annoying, though this is a fairly minor complaint. Requirements are never set in stone. I hate picking a language thinking it's the right tool for the job, then realizing that, when some new requirement surfaces, it's actually a terrible choice for that requirement. This has happened to me several times before, usually when working with languages that are very slow, very domain specific and/or has very poor concurrency/parallelism support. When you program in a language for a while, you start to build up a personal toolbox of small utility functions/classes/programs. The value of these goes drastically down if you're forced to use a different language than the one you've accumulated all this code in. What am I missing here? Why shouldn't more focus be placed on generalist languages? Are generalist languages as a category dying or alive and well?

    Read the article

  • Impact on SEO of adding categories/tags in front of the HTML title [closed]

    - by Mad Scientist
    Possible Duplicate: Does the order of keywords matter in a page title? All StackExchange sites add the most-used tag of a question in front of the HTML title for SEO purposes. On Stackoverflow for example this is usually the programming language, so you end up with a title like python - How do I do X? This has obviously an enourmous benefit on SEO as the programming language is an extremely important keyword that is very often omitted from the title. Now, my question is for the cases where the tag isn't an important keyword missing from the title, but just a category. So on Biology.SE for example one would have questions like biochemistry - How does protein X interact with Y? or on Skeptics medical science - Do vaccines cause autism? Those tags are usually not part of the search terms, they serve to categorize the content but users don't use those tags in their searches. How harmful is adding tags that are not used in searches in terms of SEO? Is there any hard data on the impact this practise might have on SEO? The negative aspects I can imagine, but have no data to show that it is actually a problem are: I heard that search engines dislike keyword stuffing and this might trigger some defense mechanisms against that It's a practise associated with less reputable sites, a keyword in front that doesn't fit the actual title well might look suspicious to some users. It wastes precious space in the title shown in search results.

    Read the article

  • Wordnik Accelerator

    - by prabhpreet
    Wow, creating IE Accelerators is superbly easy. If you want to learn how to create one, go here (some MSDN blog) and the MSDN documentation (clearly written). I was fed up of dictionary.com bringing all those popups and the stupid definitions of Google's dictionary. So I decided to scratch my own itch. I randomly stumbled on the site called Wordnik and it provides with all examples plus definitions plus lots more for words and its popup-free (as far as I know). So I decided to write and accelerator. Here is the source code (Yes, this is it): <?xml version="1.0" encoding="utf-8"?> <os:openServiceDescription xmlns:os="http://www.microsoft.com/schemas/openservicedescription/1.0"> <os:homepageUrl>http://www.wordnik.com</os:homepageUrl> <os:display> <os:name>View on Wordnik</os:name> <os:description>Looking up words on an awesome word site called Wordnik </os:description> <os:icon>http://www.wordnik.com/favicon.ico</os:icon> </os:display> <os:activity category="Define"> <os:activityAction context="selection"> <os:execute method="get" action="http://www.wordnik.com/words/{selection}" ></os:execute> </os:activityAction> </os:activity> </os:openServiceDescription> That’s it. To get it, go here. Enjoy!

    Read the article

  • Analytics - Where do my drop offs go?

    - by BadCash
    I have a website set up with Google Analytics (through the Wordpress plugin "Google Analytics for WordPress" by Joos de Valk). When I check out the visitors flow in Google Analytics, it shows something like this: (home) - 43% drop-offs /page-2/ - 10% drop-offs ... etc ... I have also set up events for external links. My main "goal" of the website is to drive traffic to my Android app on Google Play, so I have a couple of different links to that that are all set up as events. Everything seems to be working, my events show up when I go to Content - Events in Google Analytics. However, it seems to me that some percentage of the users that are reported as "drop-offs" in fact have clicked on one of the external links. But there's no info about the reason of those drop-offs in the Visitors flow-chart. I can of course check out each specific event category, event action and set "other" to Content/Page, which (I guess) shows the number of visitors who triggered a specific event on a specific page. It just seems like such a complicated way of going about this! So, is there a way to get a more detailed picture, including events, in the Visitors flow chart? Something like: (home) - 43% drop-offs Event Action: "Google Play"=50%, "Youtube"=10%, (not set)=40%

    Read the article

  • Why does Bing webmaster tools complain about multiple H1 tags?

    - by Mathew Foscarini
    I used the Bing webmaster tool's SEO analyzer on my website, and it reported There are multiple <H1> tags on the page. It recommends that there should only be one <h1> tag on the page. The page is a listing of blog posts for a category. So each blog entry is structured like this. <article> <head><h1><a>...</a></h1></head> <p>summary...</p> </article> <article> <head><h1><a>...</a></h1></head> <p>summary...</p> </article> <article> <head><h1><a>...</a></h1></head> <p>summary...</p> </article> <article> <head><h1><a>...</a></h1></head> <p>summary...</p> </article> How is this invalid? I thought this was the correct way to describe a post in HTML5.

    Read the article

  • Sources of NetBeans Gradle Plugin

    - by Geertjan
    Here is where you can find the sources of the latest and greatest NetBeans Gradle plugin: http://java.net/projects/nb-api-samples/sources/api-samples/show/versions/7.1/misc/GradleSupport To use it, download the sources above, open the sources into the IDE (which must be 7.1.1 or above), then you'll have a NetBeans module. Right-click it to run the module into a new instance of NetBeans IDE. In the Options window's Miscellaneous tab, there's a Gradle subtab for setting the Gradle location. In the New File dialog, in the Other category, you'll find a template named "Empty Gradle file". Make sure to name it "build" and to put it in the root directory of the application (by leaving the Folder field empty, you're specifying it should be created in the root directory). You'll then be able to expand the build.gradle file: Double-click a task to run it. When you open the file, it opens in the Groovy editor, if the Groovy editor is installed. When you make changes in the file, the list of tasks, shown above, is automatically recreated. It's at a really early stage of development and it would be great if developers out there would be interested in adding more features to it.

    Read the article

  • Groovy Refactoring in NetBeans

    - by Martin Janicek
    Hi guys, during the NetBeans 7.3 feature development, I spend quite a lot of time trying to get some basic Groovy refactoring to the game. I've implemented find usages and rename refactoring for some basic constructs (class types, fields, properties, variables and methods). It's certainly not perfect and it will definitely need a lot fixes and improvements to get it hundred percent reliable, but I need to start somehow :) I would like to ask all of you to test it as much as possible and file a new tickets to the cases where it doesn't work as expected (e.g. some occurrences which should be in usages isn't there etc.) ..it's really important for me because I don't have real Groovy project and thus I can test only some simple cases. I can promise, that with your help we can make it really useful for the next release. Also please be aware that the current version is focusing only on the .groovy files. That means it won't find any usages from the .java files (and the same applies for finding usages from java files - it won't find any groovy usages). I know it's not ideal, but as I said.. we have to start somehow and it wasn't possible to make it all-in-one, so only other option was to wait for the NetBeans 7.4. I'll focus on better Java-Groovy integration in the next release (not only in refactoring, but also in navigation, code completion etc.) BTW: I've created a new component with surprising name "Refactoring" in our bugzilla[1], so please put the reported issues into this category. [1] http://netbeans.org/bugzilla/buglist.cgi?product=groovy;component=Refactoring

    Read the article

  • Open Source Projects for Beginning Coders?

    - by MattDMo
    After working as a molecular biologist at the bench for many years, I lost my job last year and am thinking about a career change. I've been using open-source software and doing Linux system administration since the mid 90s, and have written/improved some small shell/Perl/PHP scripts, and am very comfortable building from source, but never progressed to creating non-trivial programs de novo. I want to move to actually learning real programming skills and contributing back to the community, with the possible eventual goal of getting into bioinformatics as a career in the future. I'm a stay-at-home dad now, so I have some time on my hands. I've done a lot of research on languages, and have settled on Python as my major focus for now. I'm set up on GitHub, but haven't forked anything yet. I've looked around OpenHatch some, but nothing really grabbed me. I've heard the advice to work on what you use/love, but that category is so broad that I'm having trouble finding any one thing to get started on. What are your suggestions for getting started? How do you pick a project that will welcome your (possibly amateurish) help? With a fairly limited skill set, how do you find a request that you can handle? What are common newbie mistakes to avoid? Any other advice?

    Read the article

  • Applying to a company while personally working on a comparable project

    - by Developer Art
    That's going to be an unusual question but here it goes. I'm entertaining the thought to send my docs to a place which develops a large web project of a social type. Social meaning people, communities, interaction and all that usual stuff. The issue is that I myself am working on something that falls into the category of social in my private time. Now the question. Is it wise to apply there under these circumstances? I think there may be issues of intellectual ownership if I develop something similar that exists or will exist in that company's work. On the other hand, the web of full of social places (even this site is one of them), many of them utilize the same ideas and move in the same direction and it seems to work for everyone. It's hard to come up with something which hasn't been tried yet by somebody else so it's all basically reuse of the commonly available ideas and experience. What I'm working on is not a functional equivalent, it's rather largely off. There may be some intersections, but on a large scale this is not an equivalent. And whatever features might coincide, they already exist everywhere on the web anyway. Also technology stacks are entirely different so the issue with directly copying out parts of the code is probably not applicable. I plan to say it up front that I'm engaged in a personal project of mine and let them see if it represents a problem for them. What do you think? Am I making things up or is there really an issue?

    Read the article

  • Navigation in Win8 Metro Style applications

    - by Dennis Vroegop
    In Windows 8, Touch is, as they say, a first class citizen. Now, to be honest: they also said that in Windows 7. However in Win8 this is actually true. Applications are meant to be used by touch. Yes, you can still use mouse, keyboard and pen and your apps should take that into account but touch is where you should focus on initially. Will all users have touch enabled devices? No, not in the first place. I don’t think touchscreens will be on every device sold next year. But in 5 years? Who knows? Don’t forget: if your app is successful it will be around for a long time and by that time touchscreens will be everywhere. Another reason to embrace touch is that it’s easier to develop a touch-oriented app and then to make sure that keyboard, nouse and pen work as doing it the other way around. Porting a mouse-based application to a touch based application almost never works. The reverse gives you much more chances for success. That being said, there are some things that you need to think about. Most people have more than one finger, while most users only use one mouse at the time. Still, most touch-developers translate their mouse-knowledge to the touch and think they did a good job. Martin Tirion from Microsoft said that since Touch is a new language people face the same challenges they do when learning a new real spoken language. The first thing people try when learning a new language is simply replace the words in their native language to the newly learned words. At first they don’t care about grammar. To a native speaker of that other language this sounds all wrong but they still will be able to understand what the intention was. If you don’t believe me: try Google translate to translate something for you from your language to another and then back and see what happens. The same thing happens with Touch. Most developers translate a mouse-click into a tap-event and think they’re done. Well matey, you’re not done. Not by far. There are things you can do with a mouse that you cannot do with touch. Think hover. A mouse has the ability to ‘slide’ over UI elements. Touch doesn’t (I know: with Pen you can do this but I’m talking about actual fingers here). A touch is either there or it isn’t. And right-click? Forget about it. A click is a click.  Yes, you have more than one finger but the machine doesn’t know which finger you use… The other way around is also true. Like I said: most users only have one mouse but they are likely to have more than one finger. So how do we take that into account? Thinking about this is really worth the time: you might come up with some surprisingly good ideas! Still: don’t forget that not every user has touch-enabled hardware so make sure your app is useable for both groups. Keep this in mind: we’re going to need it later on! Now. Apps should be easy to use. You don’t want your user to read through pages and pages of documentation before they can use the app. Imagine that spotter next to an airfield suddenly seeing a prototype of a Concorde 2 landing on the nearby runway. He probably wants to enter that information in our app NOW and not after he’s taken a 3 day course. Even if he still has to download the app, install it for the first time and then run it he should be on his way immediately. At least, fast enough to note down the details of that unique, rare and possibly exciting sighting he just did. So.. How do we do this? Well, I am not talking about games here. Games are in a league of their own. They fall outside the scope of the apps I am describing. But all the others can roughly be characterized as being one of two flavors: the navigation is either flat or hierarchical. That’s it. And if it’s hierarchical it’s no more than three levels deep. Not more. Your users will get lost otherwise and we don’t want that. Flat is simple. Just imagine we have one screen that is as high as our physical screen is and as wide as you need it to be. Don’t worry if it doesn’t fit on the screen: people can scroll to the right and left. Don’t combine up/down and left/right scrolling: it’s confusing. Next to that, since most users will hold their device in landscape mode it’s very natural to scroll horizontal. So let’s use that when we have a flat model. The same applies to the hierarchical model. Try to have at most three levels. If you need more space, find a way to group the items in such a way that you can fit it in three, very wide lanes. At the highest level we have the so called hub level. This is the entry point of the app and as such it should give the user an immediate feeling of what the app is all about. If your app has categories if items then you might show these categories here. And while you’re at it: also show 2 or 3 of the items itself here to give the user a taste of what lies beneath. If the user selects a category you go to the section part. Here you show several sections (again, go as wide as you need) with again some detail examples. After that: the details layer shows each item. By giving some samples of the underlaying layer you achieve several things: you make the layer attractive by showing several different things, you show some highlights so the user sees actual content and you provide a shortcut to the layers underneath. The image below is borrowed from the http://design.windows.com website which has tons and tons of examples: For our app we’ll use this layout. So what will we show? Well, let’s see what sorts of features our app has to offer. I’ll repeat them here: Note planes Add pictures of that plane Notify friends of new spots Share new spots on social media Write down arrival times Write down departure times Write down the runway they take I am sure you can think of some more items but for now we'll use these. In the hub we’ll show something that represents “Spots”, “Friends”, “Social”. Apparently we have an inner list of spotter-friends that are in the app, while we also have to whole world in social. In the layer below we show something else, depending on what the user choose. When they choose “Spots” we’ll display the last spots, last spots by our friends (so we can actually jump from this category to the one next to it) and so on. When they choose a “spot” (or press the + icon in the App bar, which I’ll talk about next time) they go to the lowest and final level that shows details about that spot, including a picture, date and time and the notes belonging to that entry. You’d be amazed at how easy it is to organize your app this way. If you don’t have enough room in these three layers you probably could easily get away with grouping items. Take a look at our hub: we have three completely different things in one place. If you still can’t fit it all in in a logical and consistent way, chances are you are trying to do too much in this app. Go back to your mission statement, determine if it is specific enough and if your feature list helps that statement or makes it unclear. Go ahead. Give it a go! Next time we’ll talk about the look and feel, the charms and the app-bar….

    Read the article

  • What is the value to checking in broken unit tests?

    - by Adam W.
    While there are ways of keeping unit tests from being executed, what is the value of checking in broken unit tests? I will use a simple example. Case sensitivity. The current code is Case Sensitive. A valid input into the method is "Cat" and it would return an enum of Animal.Cat. However, the desired functionality of the method should not be case sensitive. So if the method described was passed "cat" it could possibly return something like Animal.Null instead of Animal.Cat and the unit test would fail. Though a simple code change would make this work, a more complex issue may take weeks to fix, but identifying the bug with a unit test could be a less complex task. The application currently being analyzed has 4 years of code that "works". However, recent discussions regarding unit tests has found flaws in the code. Some just need explicit implementation documentation (ex. case sensitive or not), or code that does not execute the bug based on how it is currently called. But unit tests can be created executing specific scenarios that will cause the bug to be seen and are valid inputs. What is the value of checking in unit tests that exercise the bug until someone can get around to fixing the code? Should this unit test be flagged with ignore, priority, category etc, to determine whether a build was successful based on tests executed? Eventually the unit test should be created to execute the code once someone fixes it. On one hand it shows that identified bugs have not been fixed. On the other, there could be hundreds of failed unit tests showing up in the logs and weeding through the ones that should fail vs. failures due to a code check-in would be difficult to find.

    Read the article

  • The 2012 JAX Innovation Awards

    - by Janice J. Heiss
    A new article, now up on otn/java, titled “The 2012 JAX Innovation Awards” reports on  important Java developments celebrated by the Awards, which were announced in July of 2012. The Awards, given by S&S Media Group, aim to, "Reward those technologies, companies, organizations and individuals that make outstanding contributions to Java." The Awards fall into three categories: Most Innovative Java Technology, Most Innovative Java Company, and Top Java Ambassador. In addition, a finalist who did not win an award receives a Special Jury prize, "in acknowledgement of their unique contribution and positive impact on the Java ecosystem."The winners were: JetBrains for Most Innovative Java Company; Adam Bien as Top Java Ambassador; Restructure 101, created by Headway Software, as Most Innovative Technology; and Charles Nutter, Special Jury award. Each winner received a $2,500 prize. The five finalists in each category were invited to attend the JAX Conference in San Francisco, California. This year's winners each received a $2,500 prize. JetBrains Fellow, Ann Oreshnikova, listed her favorite JetBrains innovations: * Nullability annotations and nullability checker* CamelCase navigation and completion* Continuous Integration in grid (on multiple agents), in TeamCity* IntelliJ Platform and its language support framework* MPS language workbench* Kotlin programming languageWhen asked what currently excites him about Java, Adam Bien, winner of the Java Ambassador Award, expressed enthusiasm over the increasing interest of smaller companies and startups for Java EE. “This is a very good sign,” he said. “Only a few years ago J2EE was mostly used by larger companies -- now it becomes interesting even for one-person shows. Enterprise Java events are also extremely popular. On the Java SE side, I'm really excited about Project Nashorn.”Special Jury Prize Winner, Charles Nutter of Red Hat, remarked that, “JRuby seems to have hit a tipping point this past year, moving from ‘just another Ruby implementation’ to ‘the best Ruby implementation for X,’ where X may be performance, scaling, big data, stability, reliability, security, and a number of other features important for today's applications. Check out the complete article here.

    Read the article

  • configuration issue with respect to .htaccess file on ubuntu

    - by Registered User
    I am building an application tshirtshop I have following configuration in /etc/apache2/sites-enabled/tshirtshop <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/tshirtshop <Directory /var/www/tshirtshop> Options Indexes FollowSymLinks AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> and following in .htaccess file in location /var/www/tshirtshop/.htaccess <IfModule mod_rewrite.c> # Enable mod_rewrite RewriteEngine On # Specify the folder in which the application resides. # Use / if the application is in the root. RewriteBase /tshirtshop #RewriteBase / # Rewrite to correct domain to avoid canonicalization problems # RewriteCond %{HTTP_HOST} !^www\.example\.com # RewriteRule ^(.*)$ http://www.example.com/$1 [R=301,L] # Rewrite URLs ending in /index.php or /index.html to / RewriteCond %{THE_REQUEST} ^GET\ .*/index\.(php|html?)\ HTTP RewriteRule ^(.*)index\.(php|html?)$ $1 [R=301,L] # Rewrite category pages RewriteRule ^.*-d([0-9]+)/.*-c([0-9]+)/page-([0-9]+)/?$ index.php?DepartmentId=$1&CategoryId=$2&Page=$3 [L] RewriteRule ^.*-d([0-9]+)/.*-c([0-9]+)/?$ index.php?DepartmentId=$1&CategoryId=$2 [L] # Rewrite department pages RewriteRule ^.*-d([0-9]+)/page-([0-9]+)/?$ index.php?DepartmentId=$1&Page=$2 [L] RewriteRule ^.*-d([0-9]+)/?$ index.php?DepartmentId=$1 [L] # Rewrite subpages of the home page RewriteRule ^page-([0-9]+)/?$ index.php?Page=$1 [L] # Rewrite product details pages RewriteRule ^.*-p([0-9]+)/?$ index.php?ProductId=$1 [L] </IfModule> the site is working on localhost and is working as if there is no .htaccess rule specified i.e. if I were to view a page as http://localhost/tshirtshop/nature-d2 then I get a 404 Error but if I view the same page as http://localhost/tshirtshop/index.php?DepartmentId=2 then I can view it. sudo apache2ctl -M Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgi_module (shared) deflate_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) reqtimeout_module (shared) rewrite_module (shared) setenvif_module (shared) status_module (shared) Syntax OK What is the mistake if any one can point out in above configuration, or else I need to check any thing else?

    Read the article

  • How to retrieve the value of querystring from url using Javascript

    - by ybbest
    The following is a Javascript function I found on the internet , I keep here just in case I need to use it again. function getParameterByName(name) { name = name.replace(/[\[]/, "\\\[").replace(/[\]]/, "\\\]"); var regexS = "[\\?&]" + name + "=([^&#]*)"; var regex = new RegExp(regexS); var results = regex.exec(window.location.search); if(results == null) return ""; else return decodeURIComponent(results[1].replace(/\+/g, " ")); } You can also add this method to jquery as below. $.getParameterByName = function (name) { name = name.replace( /[\[]/ , "\\\[").replace( /[\]]/ , "\\\]"); var regexS = "[\\?&]" + name + "=([^&#]*)"; var regex = new RegExp(regexS); var results = regex.exec(window.location.search); if (results == null) return ""; else return decodeURIComponent(results[1].replace( /\+/g , " ")); }; $(document).ready(function () { alert($.getParameterByName("id")); }); References: http://stackoverflow.com/questions/901115/get-query-string-values-in-javascript http://blog.jeremymartin.name/2008/02/building-your-first-jquery-plugin-that.html http://stackoverflow.com/questions/7541218/writing-jquery-static-util-methods http://api.jquery.com/category/utilities/

    Read the article

  • Relationship between SOA and OOA

    - by TheSilverBullet
    Thomas Erl defines SOA as follows in his site: Service-oriented computing represents a new generation distributed computing platform. As such, it encompasses many things, including its own design paradigm and design principles, design pattern catalogs, pattern languages, a distinct architectural model, and related concepts, technologies, and frameworks. This definitely sounds like a whole new category which is parallel to object orientation. Almost one in which you would expect an entirely new language to exist for. Like procedural C and object oriented C#. Here is my understanding: In real life, we don't have entirely new language for SOA. And most application which have SOA architecture have an object oriented design underneath it. SOA is a "strategy" to make the entire application/service distributed and reliable. SOA needs OOPS working underneath it. Is this correct? Where does SOA (if at all it does) fit in with object oriented programming practices? Edit: I have learnt through answers that OOA and SOA work with each other and cannot be compared (in a "which is better" way). I have changed the title to "Relationship between SOA and OOA" rather than "comparison".

    Read the article

  • What is the value of checking in failing unit tests?

    - by Adam W.
    While there are ways of keeping unit tests from being executed, what is the value of checking in failing unit tests? I will use a simple example: Case Sensitivity. The current code is case sensitive. A valid input into the method is "Cat" and it would return an enum of Animal.Cat. However, the desired functionality of the method should not be case sensitive. So if the method described was passed "cat" it could possibly return something like Animal.Null instead of Animal.Cat and the unit test would fail. Though a simple code change would make this work, a more complex issue may take weeks to fix, but identifying the bug with a unit test could be a less complex task. The application currently being analyzed has 4 years of code that "works". However, recent discussions regarding unit tests have found flaws in the code. Some just need explicit implementation documentation (ex. case sensitive or not), or code that does not execute the bug based on how it is currently called. But unit tests can be created executing specific scenarios that will cause the bug to be seen and are valid inputs. What is the value of checking in unit tests that exercise the bug until someone can get around to fixing the code? Should this unit test be flagged with ignore, priority, category etc, to determine whether a build was successful based on tests executed? Eventually the unit test should be created to execute the code once someone fixes it. On one hand it shows that identified bugs have not been fixed. On the other, there could be hundreds of failed unit tests showing up in the logs and weeding through the ones that should fail vs. failures due to a code check-in would be difficult to find.

    Read the article

  • Linking with an image: Background vs <img>

    - by FreshCode
    What is considered best practice (semantically) when using text with an image to link to an internal page or category? Option 1 <nav> <a href="/kittens"> <img src="kittens.png" /> <span>Kittens</span> </a> <a href="/puppies"> <img src="puppies.png" /> <span>Puppies</span> </a> </nav> Option 2 <nav> <a href="/kittens" class="kittens">Kittens</a> <a href="/puppies" class="puppies"><span>Puppies</a> </nav> where the CSS is defined: a.kittens { background-image:url("kittens.png"); width:40px; height:60px; } a.puppies { background-image:url("puppies.png"); width:40px; height:60px; } Should I use a styled background for the link, or an <img> inside the anchor element?

    Read the article

  • Kickstarter and 2D smartphone games

    - by mm24
    I am about to launch a Kickstarter project as, after 14 months of full time development on my first iOS game, I run out of money. I developed an iOS game that needs few more months to be ready (the game structure is there but haven't yet worked on balancing the difficulty of the various levels). I have a feeling that most of the computer games founded on Kickstarter are for console, PC or Mac and not for smartphones. The category that many people seem to like is RPG style games. I have done tons of work over a year and collaborated with musicians and illustrators to get top quality graphics and music. The game looks cool to be an iOS 2D game but, compared to what I've seen on Kickstarter, I feel so little and humbled. I have searched for smartphone game projects on Kickstarter but haven't found many. I believe that the reason is that people are not keen in backing an APP that is normally sold for 0.99$ as they perceive is not something big. Am I the only one having this feeling? Could anyone please share a list of references to some successfully backed kickstarter smartphone game projects? (In this way the question will not become a "chat" and will fulfill the requirements to be a gamedev question). Any other article or authoritative answer will be welcome.

    Read the article

  • Today's Well Connected Companies

    - by Michael Snow
    Statoil Fuel & Retail and their partner, L&T Infotech, our recent winner of the Oracle Excellence Award for Fusion Middleware Innovation in the WebCenter category is featured this month in Profit Magazine's November Issues of both print and online versions. The online version has significantly more detail about their "Connect" project Statoil Fuel & Retail is a leading Scandinavian road transport fuel retailer that operates in 8 different countries and delivers aviation fuel at 85 airports. The company produces and sells 750 different lubricant products for B2B and B2C customers. Statoil won the 2013 Oracle Excellence Award for Oracle Fusion Middleware Innovation: Oracle WebCenter based on a stellar Oracle implementation, created with implementation partner L&T Infotech, which used Oracle’s JD Edwards and Oracle Fusion Middleware to replace and consolidate 10 SAP portals into a single, integrated, personalized enterprise portal for partners, station managers, and support staff. Utilizing Oracle WebCenter Portal, Oracle WebCenter Content, Oracle Identity Management, Oracle SOA Suite, JD Edwards applications, and Oracle CRM On Demand, Statoil is now able to offer a completely redesigned portal for an easy and user-friendly web experience, delivering a fast, secure, robust, and scalable solution that will help the company remain competitive in its industry. The solution has increased Statoil Fuel & Retail’s web footprint and expanded its online business. Read the complete article for the full story of Statoil Fuel & Retail's implementation of Oracle Fusion Middleware technology.

    Read the article

  • MongoDB: Replicate data in documents vs. “join”

    - by JavierCane
    Disclaimer: This is a question derived from this one. What do you think about the following example of use case? I have a table containing orders. These orders has a lot of related information needed by my current queries (think about the products; the buyer information; the region, country and state of the sale point; and so on) In order to think with a de-normalized approach, I don't have to put identifiers of these related items in my main orders collection. Instead, I have to repeat all the information for each order (ie: I will repeat the buyer's name, surname, etc. for each of its orders). Assuming the previous premise, I'm committing to maintain all the data related to an order without a lot of updates (because if I modify the buyer's name, I'll have to iterate through all orders updating the ones made by the same buyer, and as MongoDB blocks at a document level on updates, I would be blocking the entire order at the update moment). I'll have to replicate all the products' related data? (ie: category, maker and optional attributes like color, size…) What if a new feature is requested and I've to make a lot of queries with the products "as the entry point of the query"? (ie: reports showing the products' sales performance grouping by region, country, or whatever) Is it fair enough to apply the $unwind operation to my orders original collection? (What about the performance?) I should have to do another collection with these queries in mind and replicate again all the products' information (and their orders)? Wouldn't be better to store a product_id in the original orders collection in order to be more tolerable to requirements change? (What about emulating JOINs?) The optimal approach would be a mixed solution with a RDBMS system like MySQL in order to retrieve the complete data? I mean: store products, users, and location identifiers in the orders collection and have queries in MySQL like getAllUsersDataByIds in which I would perform a SELECT * FROM users WHERE user_id IN ( :identifiers_retrieved_from_the_mongodb_query )

    Read the article

  • Is there any CSS selector to reach an element outside of the current container?

    - by acidrums4
    (And excuse me for my bad english, for starters...) Sorry if this is a noob question, but I really don't know if the following is possible. I'm doing a html5 portfolio. I'm following a tuto from codrops to visually filter works with only css3 (http://tympanus.net/codrops/2012/01/09/filter-functionality-with-css3/). There, user can select which category want to see with some <input type="radio">'s. But those selectors are under the same container (a <section>) and give visibility for the elements via CSS using a general sibling combinator (~). So in that example, the CSS code goes like this: .ff-container input.ff-selector-type-all:checked ~ label.ff-label-type-all, .ff-container input.ff-selector-type-1:checked ~ label.ff-label-type-1, .ff-container input.ff-selector-type-2:checked ~ label.ff-label-type-2, .ff-container input.ff-selector-type-3:checked ~ label.ff-label-type-3{ background: linear-gradient(top, #646d93 0%,#7c87ad 100%); color: #424d71; text-shadow: 0px 1px 1px rgba(255,255,255,0.3); box-shadow: 0px 0px 0px 1px #40496e, 0 1px 2px rgba(0,0,0,0.1) inset; } The thing is I want to put those <input type="radio">'s on the <head> section of my portfolio, but obviously the ~ selector won't work there. So my question is that is there any selector, hack or something that can do that? Something like .ff-container input.ff-selector-type-all:checked $ header > label.ff-label-type-all { awesomeness:100%; } I really don't want to use Javascript/Jquery for that... Thank you so much in advance!

    Read the article

  • What is the value of checking in failing unit tests?

    - by user20194
    While there are ways of keeping unit tests from being executed, what is the value of checking in failing unit tests? I will use a simple example: Case Sensitivity. The current code is case sensitive. A valid input into the method is "Cat" and it would return an enum of Animal.Cat. However, the desired functionality of the method should not be case sensitive. So if the method described was passed "cat" it could possibly return something like Animal.Null instead of Animal.Cat and the unit test would fail. Though a simple code change would make this work, a more complex issue may take weeks to fix, but identifying the bug with a unit test could be a less complex task. The application currently being analyzed has 4 years of code that "works". However, recent discussions regarding unit tests have found flaws in the code. Some just need explicit implementation documentation (ex. case sensitive or not), or code that does not execute the bug based on how it is currently called. But unit tests can be created executing specific scenarios that will cause the bug to be seen and are valid inputs. What is the value of checking in unit tests that exercise the bug until someone can get around to fixing the code? Should this unit test be flagged with ignore, priority, category etc, to determine whether a build was successful based on tests executed? Eventually the unit test should be created to execute the code once someone fixes it. On one hand it shows that identified bugs have not been fixed. On the other, there could be hundreds of failed unit tests showing up in the logs and weeding through the ones that should fail vs. failures due to a code check-in would be difficult to find.

    Read the article

  • Bayesian content filter for vbulletin [on hold]

    - by mc0e
    I've been tasked with coming up with a tool to automatically flag some posts for moderator attention on a large vbulletin forum. It's not spam per se, but the task has a lot in common with the sort of handling that might be done by a spam protection plugin (a mod in vbulletin speak). There's only so much I can say, but the task does not involve bad users, so much as particular kinds of posts which the moderators need to be aware of. Filtering out user registrations and links is therefore not useful, and we are talking about posts by real human users. What I'm looking for is an existing bayesian classification plugin, or something that I can study to get an understanding of how to do the vbulletin side of the interface in order to build such a thing. Ie I'd need ways for moderators to list flagged posts, and to correct the classification of posts which have been mis-classified. Ideally I want a 3 way split with an "unsure" category in order to reduce what has to be reviewed to find any mis-classifications. Any pointers? I've searched around a bit, and so far what I've found has been more or less entirely targetted at intervening in sign-ups (mostly using stopforumspam), captchas, and use of external services like akismet which are spam specific. I'm also considering an external solution, which might be ableto be interfaced i

    Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >